RecoRdeRs and data acquisition

RecoRdeRs and data acquisition
237
Controllers
and Programmers
Save our natural resources! Save storage space! Save time! Save money! Fit a truckload of data on a USB stick! Sound
good? Then take a look at the new multipoint video recorders from Honeywell. We can also help you tie your instrumentation to your plant network.
Lesman is the authorized  stocking representative for Honeywell Sensing and Controls instrumentation for Northern
Illinois, Northwest Indiana, Eastern Iowa, and the pulp and paper industries of Wisconsin and Michigan’s upper peninsula.
If you see a Block L on a product model number, we stock it, so it’s available to ship to you the same day!
PricesSee
Start at Page
$928.00
$1653.00
$1912.00
240
242
244
$1803.00
$2730.00
248
250
$4001.00
250
$3985.00
$4899.00
Call
Call
AMS2750-D Standards Compliance with Honeywell X-Series Recorders
Circular Charts and Pens IN STOCK at Lesman
Honeywell TrendManager Pro Configuration and Analysis Software
$328.00
Honeywell TrendServer Pro Configuration, Analysis, and Monitoring
Software for Paperless Recorders
$546.00
Honeywell TrendViewer Software for Paperless Recorders
FREE
255
238
258
Digital Indicators
Circular Chart Recorders
Honeywell DR4300 10” Circular Chart Recorders
Honeywell DR4500 12” Classic Circular Chart Recorder
Honeywell DR4500 12” Truline Circular Chart Recorders
Paperless (Video Display) Recorders
Honeywell eZtrend GR 5” Display Paperless Recorder
Honeywell Minitrend GR 5.5” Display Web-Ready Paperless Recorder
Honeywell Multitrend GR 12.1” Display High Performance
Web-Enabled Paperless Recorder with Enhanced Data Storage
Solids Flow and Motion
TABLE OF
CONTENTS
Recorders and data acquisition
Accessories
Combustion Safety
and Efficiency
256
256
Looking for charts or pens
for your recorders?
You’ll find them at
www.lesman.com
Search by part
number for fast
results.
Due to manufacturer agreements, not all
products are available in all geographic
areas and markets.
Prices in this catalog are current at the
publication date, and are subject to change
without notice.
Process Valves
Honeywell DPR180 7” Digital Process Reporter
Honeywell DPR250 10” Multipoint Digital Process Reporter
Recorders and
Data Acquisition
Stripchart Recorders
RECORDER
SUPPLIES
V 01.2015
Solids Flow and Motion
238
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Lesman Instrument Company
www.lesman.com
[email protected]
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Recorder Charts and Pens Available from Lesman Stock
Model Selection Guide
Controllers and
Programmers
Digital Indicators
Recorders and
Data Acquisition
Catalog
Description
Number
Price
Chart Paper Normally Available from Lesman Stock. 100/Box Unless Noted.
24-Hour, 0 to 100 (°C or Linear)
24001660-001 $32.34
24-Hour, 0° to 300°F (Type J)
24001660-002 32.34
24-Hour, 0° to 600°F (Type J)
24001660-003 32.34
24-Hour, 0° to 2000°F (Type K)
24001660-005 32.34
24-Hour, 50 to 250 (Linear)
24001660-008 32.34
24-Hour, 0 to 200 (°C or Linear)
24001660-010 32.34
Honeywell 24-Hour, 0° to 500°F (Type J)
24001660-013 32.34
DR4300 10” 24-Hour, 0° to 800°F (Type J)
24001660-014 32.34
Circular
24-Hour, -90° to 210°C (Type T)
24001660-034 32.34
Chart
24-Hour, -85 to 190 (RTD)
24001660-047 32.34
Recorders
24-Hour, 0 to 600mV, 4-20 mA (Lin)
24001660-052 32.34
24-Hour, 50° to 650°F (Type J)
24001660-056 32.34
24-Hour, 0° to 200°F (Type J)
24001660-114 32.34
7-Day, 0 to 100 (°C or Linear)
24001661-001 32.34
7-Day, -5 to 50 (Linear)
24001661-022 32.34
7-Day, -35 to 75 (Linear)
24001661-023 32.34
7-Day, 0 to 50 (Linear)
24001661-051 32.34
7-Day, 0 to 100, -30 to 70 (Linear)
24001661-601 32.34
Starter Box (25), 24H/7D, 0-100 (Lin) 30755820-001 22.80
Chart Paper Normally Available from Lesman Stock. 100/Box Unless Noted.
Truline Thermal Chart
30755317-001 61.46
Honeywell Starter Box of 25, 24H/7D, 0-100
30755311-001 20.90
12” Circular 7-Day, 0–100 Linear
30014479-000 35.00
Chart
24-Hour, 0–100 Linear
30014012-000 35.00
Recorders
24-Hour, 0–200
30012518-000 35.00
24-Hour, 50–250
30016378-000 35.00
24-Hour, 50–0-150
30680015-051 35.00
Chart Paper and Pens Normally Available from Lesman Stock. 1/Pack
6-Color Ink Wheel
46180501-001 65.52
Honeywell Pen #1 Ink Cartridge, Blue
46187001-001 15.07
DPR100 C/D Pen #2 Ink Cartridge, Red
46187001-002 15.07
4” Stripchart 4” Fanfold Chart, 50 Divisions
46187045-050 26.76
Recorders
4” Fanfold Chart, 100 Divisions
46187045-100 26.76
4” Roll Chart, 50 Divisions
46187044-050 14.02
Looking for charts or
pens for your recorders?
Combustion Safety
and Efficiency
You’ll find them at www.lesman.com
Search by part number for fast results.
Catalog
Description
Number
Price
Chart Paper Normally Available from Lesman Stock. 100/Box Unless Noted.
8” Circular
7-Day, 0–100 (for Class 61)
3001571T-000 $32.50
Chart Paper and Pens Normally Available from Lesman Stock. 1/Pack
Honeywell
6-Color Ink Cartridge
46182712-001 81.04
DPR180 7”
7” Fanfold Chart, 100 Divisions
46190051-100 28.90
and
7” Roll Chart, 100 Divisions
46190052-100 28.90
DPR250 10” 10” Fanfold Chart, 100 Divisions
46182707-001 39.50
Stripchart
10” Fanfold Chart, 300 Divisions
46182707-300 35.38
Recorders
10” Roll Chart, 100 Divisions
46182708-001 36.00
Replacement Parts for Honeywell Circular Chart Recorders. Normally
Available from Lesman Stock
DR4200/4300/4500 Chart Drive Motor/Hub Kit
30756113-501 129.00
DR4200/4300/4500 Chart Hub Kit (Pack of 2)
30756150-001 45.00
DR4300 Printed Circuit Assembly, Record/Control
51404453-502 730.00
DR4500 Alarm Output Kit
30756140-501 193.00
DR4500 Display Board
30757571-501 242.00
DR4500 Input Upgrade Card
30756141-003 445.00
DR4500 Keypad Membrane Switch Kit
30754957-501 115.00
DR4500 Motherboard
30754919-501 187.00
DR4500 Printed Output Circuit Board
30754922-501 493.00
DR4500 Truline Replacement Pen Arm Assembly
30756304-501 181.00
DR4500 Truline Pen Motor Servo Plate Assembly
30754975-503 228.00
DR4500 Truline Processor Board
51309355-502 784.00
Fiber-Tip Pens Normally Available from Lesman Stock (6 per Pack)
Honeywell Red Pen, 0.37” Nib
30735489-002 54.92
Fiber-Tip
Honeywell Purple Pen, 0.6” Nib
30735489-007 54.92
Pens for
Universal Red Pen, 0.37” Nib
82-39-0202-06 28.36
Honeywell Universal Red Pen, 0.6” Nib
82-39-0302-06 28.36
Circular Universal Purple Pen, 0.6” Nib
82-39-0306-06 28.36
Chart
Universal Purple Pen, 0.37” Nib
82-39-0206-06 28.36
Recorders
Universal Green Pen, 0.14” Nib
82-32-0314-05 28.36
Chart Paper Normally Available from Lesman Stock. 100/Box Unless Noted.
Amprobe
4” x 30-Ft Roll Strip Chart (1 Roll)
300SVA
28.24
Dickson
8” Dia., 7-Day, 0 to 100
C412
35.10
Circ Charts
8” Dia., 7-Day, -20 to 120, 0–100 rH
C417
35.10
Foxboro
12”, 24-Hour, 0-100 Range
898413
26.84
UE Pressure- 6” Dia., 7-Day, 50 to -115, (50/Box)
6282-169
36.10
Sensitive
6” Dia., 24H, 160 to 280, (50/Box
6282-176
36.10
Circular
6” Dia., 7-Day, 25 to -40 (50/Box)
6282-240
36.10
Charts
6” Dia., 7-Day, 15 to -50 (50/Box)
6282-301
36.10
Buy recorders and supplies online at Lesman.com!
Process Valves
Choosing the Right Circular Chart Recorder
The Recorders of
Honeywell‘s
LeaderLine Family.
Chart
DR4300
DR4500 Classic
DR4500 Truline
10” Circular
Choose from 150
preprinted charts
12” Circular
Your choice of 5,000
preprinted charts
12” Circular: Prints its chart as it records!
With user-configurable data (date, time,
process ID) directly on the chart!
Up to 2 Up to 4
Up to 2
Input
T/Cs: Type J, K, R, S, T; RTDs: Pt100Ω
T/Cs: J, K, R, S, T, B, E, W5W26; RTDs: Pt100Ω, Pt500Ω
Features
0-200 mV; 0-1, 0-5, 1-5 or 0-10 VDCLinear: 4-20mA, 0-10 or 10-50 mV, 1-5 or 1-10 V
Optional Model: T/Cs: B, E,
W5W26, NiNi Moly
Accuracy
±0.35% Span Standard
±0.1% Span, (Field-Calibrated) ±1°F for T/Cs
±1% or Better for Voltage Ranges
2 with Control
2
Alarms*
2 per Pen
2, 4 or 6
Auxiliary Output*
1 per Pen
1-3
Communications*
3rd Party Ethernet Bridge,
Limited Modbus RTU, RS485
3rd Party Ethernet Bridge, Modbus RTU RS485
Digital Input
Controllers*
Autotune
Control Features
Door
Programmers*
1 per Pen
1 or 2
2 (4-20mA) Pulse Output
AccuTune II
AccuTune II AccuTune II
On/Off, Duplex,
PD with Manual Reset
Cascade, Duplex, Position
Proportional, Universal Output
Cascade, Duplex, Position
Proportional, Universal Output
NEMA 3/IP66 NEMA 3, NEMA 4X Door Optional
1 per Pen, 4 Profiles, 24 Segments
Standard with Control, 6 Profiles, 36 Segments
0.3 Seconds
0.3 to 0.7 Seconds
SpecView
SpecView, Prosoft
Sample Rate
Software Programs
Timers, One Totalizer per Pen,
Totalization of Both Channels, Timers
24 VDC Power, Optional Two-Line
Setpoint Programming with Real-Time
Added
Display for Viewing PV, Setpoint, Clock, Auxiliary 4-20 mA Output, Integral
Functionality
Control Output, Deviation
24 VDC Power Supply Provides Loop
from Setpoint
Power for Up to Two Transmitters
Prices Start at
$928.00
Totalization on All Channels, Timers,
Setpoint Programming, Auxiliary 4-20 mA
Output, Math Functions (Mass Flow, BTU,
Fo Sterilization), Message Printing, Integral
24 VDC Power Supply, Real-Time Clock,
Up to 6 Relays, HTST, Dairy and
Pasteurization Models Available
$1653.00
Solids Flow and Motion
239
Controllers
and Programmers
CHART
RECORDERS
Digital Indicators
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Recorders and
Data Acquisition
www.lesman.com
[email protected]
Combustion Safety
and Efficiency
Lesman Instrument Company
V 01.2015
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
$1912.00
* Optional Functionality
Need a temperature input for your recorder?
See pages 98–105.
Process Valves
Approvals
V 01.2015
Solids Flow and Motion
CHART
240 RECORDERS
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Lesman Instrument Company
www.lesman.com
[email protected]
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
DR4300 10” Circular Chart Recorder
Standard
“DR4300 Circular”
Controllers and
Programmers
Display Models Also Include
With Digital Display
Features
Digital Indicators
•
•
•
One or Two-Pen Models
Accuracy 0.35% Span
Field Configurable
Fully configurable via DIP switches. Set chart
range and speed to meet your needs.
• Support for Thermocouple Types
J, K, R, S, T, 100Ω RTDs, plus 0‑20 or 4-20 mA,
0-20 or 0-50 mV, 0-5 and 1‑5 VDC
AccuTune II and Fuzzy Logic
Overshoot Suppression
Standard in PID Control!
• Built-In Self Test
• Thermocouple Burnout Protection
If a thermocouple fails, the pen is driven
upscale, to safely shut down your process.
Can be field adjusted as down­scale failsafe.
• FM-Approved Limit Control Models
Optional high or low manual reset PV limit
alarm. Adjustable, will energize a relay to
activate an alarm or shut down a process.
Recorders and
Data Acquisition
Combustion Safety
and Efficiency
Honeywell’s DR4300 is ideally suited to applications handled by lowcost analog recorders, with accuracy requirements not exceeding 0.50%,
and is appropriate for most high-performance applications requiring
accuracy not exceeding 0.25%. Both recorders use 10” charts and are
available with one pen or two.
Each DR4300 has built-in diagnostics that check critical recorder operations at startup and provide error detection or messages to alert you
to potential faults. In addition, a built-in step pattern test can be run on
demand to ensure proper pen and chart drive motor operation.
Configuring the basic model is easy — just select the pre-configured
range, actuation, and chart speed.
An optional display provides additional flexibility to select other chart
ranges, input actuation, control or alarm parameters, and chart speeds.
Upper and lower displays let you view the process variable (PV), the
control setpoint, control output, deviation from setpoint, or totalizer.
In the setup mode, digital displays are preempted by prompts and
values for entering the configuration data. Indicators light to show which
input channel PV is being displayed, which output relay is active, the
selected temperature unit, and the controller’s mode of operation.
The DR4300 recorder is available with an integral microprocessorbased single-loop PID controller for each pen. A variety of output types
— current, time proportional simplex or duplex control, with electromechanical relays, solid-state relays, or open collector outputs are available.
Depending on the output type, you can configure the control action as
On/Off, PID-A, or PD with manual reset.
Process Valves
Options
• Alarm Outputs: Integral alarms activate external equipment.
•Totalizer: Totalizes a variable such as a flow signal, on one or both
pens. Provides a 6-digit digital display indication of the totalized value
with reset capability.
• Transmitter Power: 24 VDC output power up to two transmitters.
• Digital Inputs: Two digital inputs per pen.
•
•
•
•
•
•
•
•
Improved Accuracy to 0.10% span
24 VDC Transmitter Power Supply
Digital Display/Configuration Keypad
Recording parameters are easily setup using simple prompts a keyboard.
Two Alarms per Pen Optional
Up to Two PV Totalizers Optional
More Sophisticated Control Options
Up to two controllers with current relay
outputs. On/Off, duplex time proportioning, plus alarm, PID or PD/MR algorithms.
HI/LO Pen with Decimal Capability
Support For Additional Thermocouples
B, E, W5WW26, NiNiMo, plus 0-100 and
0‑200 mV, and 0-10 VDC
Input Actuations
PV Input
°F
°C
E
-454 to 1832
-270 to 1000
T
-420 to 700
-251 to 371
K
-320 to 2500
-196 to 1371
E (low)
-200 to 1100
-129 to 593
T (low)
-200 to 600
-129 to 316
Thermocouple
K (low)
-20 to 1000
-29 to 538
J
0 to 1600
-18 to 871
Nicrosil-Nisil
0 to 2372
-18 to 1200
R, S
0 to 3100
-18 to 1704
W5W26
0 to 4200
-18 to 2316
J (low)
20 to 770
-7 to 410
Ni-Ni- Moly
32 to 2500
0 to 1371
B
105 to 3300
41 to 1815
RTDPt100Ω
-300 to 900
-184 to 482
IEC α =0.00385
Pt100Ω (low)
-130 to 392
-90 to 200
0-20, 4-20 mADC; 0-10, 0-100, and 0-200 mVDC;
Linear
0-1, 0-2, 0-5, 1-5, and 0-10 VDC
DR4300 Recorder Supplies
In Stock at Lesman!
-660=24-Hour -661=7-Day
0–100 (°C or Lin)...............24001660-001
0°–300°F (Type J).............24001660-002
0°–600°F (Type J).............24001660-003
0°–2000°F (Type K)..........24001660-005
50–250 (Lin).......................24001660-008
0–200 (°C or Lin)...............24001660-010
0°–500°F (Type J).............24001660-013
0°–800°F (Type J).............24001660-014
-90°–210°C (Type T)........24001660-034
Box of 100 Charts
$32.34
-85–190 (RTD)...................24001660-047
0-600mV, 4-20 mA Lin....24001660-052
50°–650°F (Type J)...........24001660-056
0°–200°F (Type J).............24001660-114
0–100 (°C or Lin)...............24001661-001
-5–50 (Lin)...........................24001661-022
-35–75 (Lin)........................24001661-023
0–50 (Lin)............................24001661-051
0–100, -30–70 (Lin)..........24001661-601
Honeywell Brand Pens
Pen #1 Red: 30735489-002 Pen #2 Purple: 30735489-007 (6-Pack) $54.92
Universal Pens to Fit Honeywell Recorders
Pen #1 Red: 82-39-0202-06 Pen #2 Purple: 82-39-0306-06 (6-Pack) $28.36
Ordering Instructions
Make one selection from each table section at the right. Check the restriction letters to ensure availability. A finished catalog number looks like this:
DR4301 - _ _ _ _ - _ _ _ _ _ - _ _ _ _ - _ _ _ _ - _ _ - _ _ _ -E0
Specifications
Input Impedance: mA DC: 250Ω; VDC: 200KΩ; RTD: 13.3KΩ; Others: 10
MegΩ.
Span Step Response Time: 7 sec max.; Reproducibility: 0.1% of span.
Input Filter: Without display: Analog with time constant of 3 seconds and
digital with time constant of 1 second; With display: Analog with time
constant of 3 seconds and digital adjustable 0 to 120 seconds.
Optional Digital Display: Vacuum fluorescent, alphanumeric; Upper 4-digit
display dedicated to the process variable or setpoint; 6-digit lower display
shows key-selected operating parameters.
Controller Output
On-Off or Time Proportional: One SPDT electromechanical relay. Control
action can be set for direct or reverse. For limit controller: SPDT electromechanical output. Relay contact ratings: Resistive load: 5A @ 120 VAC, 2.5A
@ 240 VAC; Inductive load: 50 VA @ 120 VAC or 240 VAC; Solid-state relay
contact rating: 0.8A @ 120 VAC; Open collector output contact Rating: 12 mA
@ 24 VDC; Resolution: 3.33 mSec.; Cycle time: 1 - 120 seconds.
Current Proportional: 21 mA DC max. into a grounded or non-grounded
load of ±0 to 600Ω. 4-20 mA output range can be direct or reverse acting.
Resolution: 11 bits; Accuracy: 0.5% full scale.
Time Proportional Duplex: Variation of time proportional for heat/cool
applications. Uses two relay contacts with adjustable deadband, split at
50% controller output.
Output Limits: 0 to 100% relay output; -5% to 105% current.
Deadband: -5% to 25% time relay; 0 to 25% on-off duplex.
Hysteresis: 0 to 100% of PV span.
Case: NEMA 3 molded, foamed-Noryl™ with gasketed door.
Pen: Disposable fiber-tip ink cartridge, line length per cartridge more than
1000 ft.; One pen: Purple; Two pens: Purple and red.
Chart: 10.24” diameter, 4” calibrated width, standard preprinted markings.
Approval Bodies: UL, CSA, FM approved limit controller model.
Options
Alarm Output: Two SPDT electromechanical relays, solid-state or open collector outputs for alarm. Relay contact ratings: 5A @ 120 VAC or 2.5A @ 240
VAC resistive; 50 VA @ 120 VAC or 240 VAC inductive.
Tuning: PID tuning parameters of Gain or PB, Rate, Reset.
Sensor Burnout: Selectable for none, upscale, or downscale.
Totalizer: 1 per pen, resettable with keypad or remote (digital) input.
Alarms: Based on PV or deviation, high/low state; Hysteresis: 0–100%span.
Digital Inputs: Two digital inputs, dry contact; Use for event recording, reset
totalizer, timer, switch to setpoint 2, switch to manual mode.
Models In Stock at Lesman
Available to Ship Today!
DR4301-0000-G0100-0000-0000-00-000-E0
DR4311-0000-G0100-0000-0000-00-000-E0
DR4302-0000-G0100-0000-0000-00-000-E0
DR4312-0000-G0100-0000-0000-00-000-E0
$960.00
1212.00
1347.00
1622.00
Please note: These devices are not field-upgradeable. If you need a
recorder that you can add options to later, see the DR4500 Truline and
Classic models on the next six pages.
CatalogAvail-
Description
Numberability Price
No Display
DR4301 ↓$928.00
One Pen No Display, CE Mark
DR4321 ↓1590.00
Recorder With VFD Display
DR4311 ↓ 1180.00
VFD Display, CE Mark
DR4331 ↓ 1261.00
No Display
DR4302 ↓ 1315.00
Two Pen No Display, CE Mark
DR4322 ↓ 1400.00
Recorder With VFD Display
DR4312 ↓1590.00
VFD Display, CE Mark
DR4332 ↓1664.00
None
0 _ _ _ • • • •
0.00
2 Outputs (Alarm/On-Off Control) 2 _ _ _ a a 139.00
1 PID Control
3 _ _ _ a,ea,e375.00
Pen
1 PID Control/SP Program/Timer
4 _ _ _ a,ea,e578.00
One
2 Outputs (Alarm1/Timer)
5 _ _ _ a a 161.00
4-20 mA Retransmission Output
A _ _ _ a,ha,h204.00
FM Approved Limit Control
F _ _ _ a a 161.00
FM Appr. Limit Control/Timer Out. G _ _ _ a a 182.00
None
_ 0 _ _ • • • •
0.00
2 Outputs (Alarm/On-Off Control) _ 2 _ _ c 139.00
1 PID Control
_ 3 _ _ a,c375.00
Pen
1 PID Output/SP Program/Timer
_ 4 _ _ a,c578.00
Two
2 Outputs (Alarm1/Timer)
_ 5 _ _ a a 161.00
4-20 mA Retransmission Output
_ A _ _ c,h204.00
FM Approved Limit Control
_ F _ _ c 161.00
FM Appr. Limit Control/Timer Out. _ G _ _ c 182.00
Output None
_ _ 0 _ • • • •
0.00
Type
Electromechanical Relay
_ _ E _ j j
0.00
Pen 1
Solid-State Relay
_ _ S _ j j
0.00
Open Collector
_ _ T _ j j
0.00
Output None
_ _ _ 0 • • • •
0.00
Type
Electromechanical Relay
_ _ _ E •
0.00
Pen 2 Solid-State Relay
_ _ _ S •
0.00
Open Collector
_ _ _ T •
0.00
Gray Door
G _ _ _ _ • • • •
0.00
Blue Door
B _ _ _ _ • • • •
0.00
Gray Door with Keypad
H _ _ _ _ • •
43.00
Door
Blue Door with Keypad
C _ _ _ _ • •
43.00
Options Stainless Steel Door
R _ _ _ _ • • • •
396.00
Standard Latch
_ 0 _ _ _ • • • •
0.00
Door Lock/Chart Plate Seal
_ K _ _ _ • • • •
107.00
Universal Power, 120/240 VAC, 50/60 Hz
_ _ 1 _ _ • • • •
0.00
Universal Power + 24 VDC Transmitter Power _ _ 3 _ _ • • • •
161.00
Communi- None
_ _ _ 00 • • • •
0.00
cations
RS485 Modbus RTU
_ _ _ C0 • •
295.00
No Digital Inputs
00 _ _ • • • •
0.00
Pen One
Digital Inputs D0 _ _ c,g d,g
80.00
No Totalizer Function
_ _ 00 • • • •
0.00
Totalizer
_ _ T0 • •
187.00
No Digital Inputs
00 _ _ • • • •
0.00
Pen Two
Digital Inputs D0 _ _ d,g
80.00
No Totalizer Function
_ _ 00 • • • •
0.00
Totalizer
_ _ T0 • •
187.00
No Approvals
0 _
• • • •
0.00
UL Listing
U _
• • • •
27.00
Approvals/ CSA Certification
C _
• • • •
27.00
Certificates UL and CSA Approval
B _
• • • •
48.00
No Certificates
_ 0
• • • •
0.00
Cert. of Conformance (F3391)
_1
• • • •
32.00
Cert. of Calibration (F3399)
_ 2
f f f f
295.00
Cert. Conformance/Calibration _3 ffff 327.00
Manual
Printed User Manual (English)
-E0
• • • •
32.00
Restrictions
a Requires Pen 1 output
c Requires Pen 2 output (_ _ _ E, _ _ _ S, or _ _ _ T)
e PID control: Current Out + 2 Alarm Out. For On/Off or time proportional control, only
one output can be an alarm. Time proportional duplex requires both outputs.
f Customer must supply input actuation and range for each input.
g Digital inputs only available with Pen 1 or Pen 2 outputs.
h 4-20 mA retransmission output includes 2 outputs per pen for alarms.
j Not available on FM-Approved units (Pen 1, Pen 2: F_ _ _ , G _ _ _, _ F _ _, _ G _ _)
Solids Flow and Motion
Model Selection Guide
Controllers
and Programmers
241
Digital Indicators
CHART
RECORDERS
Recorders and
Data Acquisition
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Combustion Safety
and Efficiency
www.lesman.com
[email protected]
Process Valves
Lesman Instrument Company
V 01.2015
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
V 01.2015
Solids Flow and Motion
CHART
242 RECORDERS
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Lesman Instrument Company
www.lesman.com
[email protected]
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
DR4500 Classic 12” Circular Chart Recorder
Controllers and
Programmers
New Features
• Auxiliary Output
• Mass Flow and
BTU Calculation
• 2 Loops of Control
• Improved Setpoint
Programming
• Decimal Point
Scaling on Charts
• Works with RS-485 to
Ethernet bridge
Operator Interface
Two digital displays present the process variable (PV), controller
setpoint, output, deviation from reference input, dry bulb temperature,
totalization value, or engineering units as desired.
In configuration mode,digital displays show English prompts and values
for entering data. Indicators light to show alarm condition, which channel PV is on display, remote setpoint, which output relay is on, selected
temperature unit, and operating mode.
The deviation bargraph shows if the PV is at, above, or below your
desired setpoint.The keypad also serves as an integral automatic/manual
station to provide bumpless transfer for controllers. On two-pen models,
the HOLD key allows continuous display of one-channel process variable
while the recording action proceeds normally.
Microprocessor-Controlled Recording
DR4500 Classic
Digital Indicators
DR4500 Classic: The Benchmark for
12” Circular Chart Recorders
An Instant Classic...
Honeywell’s DR4500 Classic 12” circular chart recorder is ideal for applications in food, pharmaceuticals, environmental testing, and metal
working — where measured variables must be documented on a single
chart and retained to meet industry requirements.
Recorders and
Data Acquisition
With a Unique Lineup of Features . . .
Combustion Safety
and Efficiency
Extreme accuracy: Typically less than ±1°F for the usable thermocouple
ranges; meets the MIL requirement for type T and Pt100Ω RTD; ±0.1%
or better for voltage ranges.
Universal inputs: Accepts all thermocouples (Types B, E, J, K, N, R, S,
T, W5W26; RTDs (Pt100Ω or Pt500Ω); relative humidity (0–100%); voltage/current (0–10 or 10–50 mV, 0–5 or 0–10V, 4–20mA).
Easy setup: English prompts and menus walk you through configuration. Simplifies setup and reduces risk of configuration errors.
Field configurable: Chart ranges can be set and reset in the field
simply by inputting on the keyboard.
Standard charts: Uses a standard 12”chart to record process variables;
chart ranges and speeds are keyboard-selectable.Chart speeds vary from
1 to 733 hours per revolution. 5,000 different charts available.
Entire process at a glance: Digital displays are easy to read at a
distance or in dim light. Selectable displays include PV indication, SP,
deviation, alarms, control mode (auto/manual), temperature units (°F/°C),
and setpoint program (run/hold).
It’s Your Option
Process Valves
Expand the functionality of your DR4500 Classic with these options:
• Control outputs: Time, current or position proportioning, three-position step control, simplex or duplex with mixed output forms, fully
field-selectable to provide the utmost versatility.
• Control algorithms: Configurable for On-Off, PID-A, PID-B, or PD
with manual reset; 1 or 2 control loops available.
•Alarms: Ties soft alarms to up to 6 integral SPST relays.
• Door lock, stainless steel door.
• Flow totalization: Expands your recorder’s operation to meet special application requirements.
Both the chart and pen are driven by microprocessor-controlled stepper motors, for precise, maintenance-free operation. Since chart speed
is configurable, you can easily alter it through the keypad — no gear
changing or additional motors required. The microprocessor uses the
chart range data and input data to determine proper pen position.
Input Processing
Input can be one of many standard low-level electrical signals. For twopen models, a relative humidity (wet/dry bulb) input is available using
Pt100Ω bulbs. Each input is sampled three times per second.
Set the input type and range for hassle-free changes in the field. Easily
expand or compress ranges within limits to meet your specific need.You
can also select upscale or downscale sensor break protection.
A digital filter with configurable time constants lets you apply input
signal smoothing. All nonlinear inputs are linearized using lookup tables.
This allows mixed actuations for two-pen models to record on a linear
chart. Bypass linearization to record on a nonlinear chart.
The integral 24 VDC power supply and 4-20 mA input configuration
allows direct operation with up to two transmitters without the need
for any additional/external transmitter power supply.
To totalize a variable, such as a flow signal, you select the input and
preset the (8-digit) display scaling factor, eliminating the need for additional integration hardware.You can reset the totalizer with digital input
from a remote site. And, set a low-flow cutoff in percent of range.
Digital Controller
The DR4500 includes an integral microprocessor-based, single-loop
PID controller. Choose from a variety of output types, including duplex
variations for heat-cool applications, as the output for your final control
element. Depending on the type, you can set control action as on-off,
PID-A, PID-B, PD with manual reset, or three-position step control.
All DR4500 series recorders include selfdiagnostics that check critical operations
and provide error messages to alert you to
detected faults. At start-up, one diagnostic
is run on selected circuitry. Key tests let you
start diagnostics on demand to check the
keypad and displays.
Visit our website to
download complete
specs and
manuals.
Controller Output Types
On/Off or Time Proportional: One SPST electromechanical relay, direct
or reverse action, N/O or N/C contact selectable.
On/Off or Time Proportional Duplex, 3-Position Step Control: Two
SPST electromechanical relays, direct or reverse action, N/O or N/C
contact selectable.
Current Proportional: 20 mADC max. into ±0–1000Ω grounded or nongrounded load. Output range can be set between 4 and 20 mA, direct
or reverse action. 10 bit resolution. 0.5% full scale accuracy.
Position Proportional: Two SPST electromechanical relays operate
motor with 100Ω to 1000Ω slidewire.
Current/Time or Time/Current Duplex: Variation of time proportional duplex for heat/cool use. Time proportional output SPST
electro­mechanical relay (4.4 mSec resolution, 1-120 sec. cycle time)
Rated [email protected] VAC or 2.5A @240 VAC resistive, 50VA @ 120/240 VAC
inductive. Current proportional output is 4-20 mA signal fed into
±0–1000Ω grounded or non-grounded load, operational over 50% or
100% range. 10 bit resolution, 0.5% full-scale accuracy.
Protect your instrumentation!
Need electrical surge protection? Phoenix
Contact offers a full line of electrical surge
protection for AC- and DC-powered controllers, recorders, and loop power supplies. Call
for pricing.
Ordering Instructions
Make one selection from each table section below. Check the restriction letters to be sure that the unit you have selected is available. A
finished catalog number looks like this:
DR45A1 - _ _ _ _ - _ _ - _ 0 _ - _ - _ _ _ _ _ E - 0
Solids Flow and Motion
243
CatalogAvailDescription
Numberability Price
Single Pen DR4500 12” Classic Recorder
DR45A1- ↓ $1653.00
Dual Pen DR4500 12" Classic Recorder
DR45A2- ↓2142.00
Channel T/C, RTD, mV, 0-5 VDC,
1
4-20 mA, Radiamatic
1 _ _ _ - • •
0.00
Input
0-10 VDC
3 _ _ _ - • •
40.00
Channel None
_ 000 -
•
0.00
2
T/C, RTD, mV, 0-5 VDC,
Input
4-20 mA, Radiamatic
_ 100 - •
0.00
0-10 VDC
_ 300 - •
40.00
Channel None
0 _ -
• •
0.00
1 Out Control Output #1
1 _ - •
493.00
Channel None
_ 0 -
• •
0.00
2 Out Control Output #2
_ 1 - •
493.00
None
0_ _-
• •
0.00
External Auxiliary 4-20 mA Output
1_ _-
• •
204.00
Interface RS485 Modbus RTU Communication
3_ _-
• •
289.00
RS485 Modbus RTU + 4-20 Aux. Output
4_ _-
• •
428.00
Pen
Standard Fiber-Tip (Purple, Red)
_0_-
• •
0.00
None
_ _ 0-
• •
0.00
Alarms 2 Alarms/2 Digital Inputs
_ _ 1-
• •
193.00
1 Alarm/1 Timer Output/2 Digital Input
_ _ 4-
• •
209.00
Totali- None
0- ••
0.00
zation Totalization on Input 1
A-
• •
268.00
Totalization on Inputs 1 and 2
E- •
471.00
Gray Door with Glass Window
0 _ _ _ _ _ • •
0.00
Gray Door with Acrylic Window
1 _ _ _ _ _ • •
48.00
Blue Door with Glass Window
5_ _ _ _ _ • •
0.00
Blue Door with Acrylic Window
6_ _ _ _ _ • •
48.00
Stainless Steel Door, Glass Window
2_ _ _ _ _ • •
477.00
Stainless Steel Door, Acrylic Window
3_ _ _ _ _ • •
477.00
NEMA4X Door with Glass Window
P_ _ _ _ _ • •
268.00
NEMA4X Door with Acrylic Window
R_ _ _ _ _ • •
268.00
Standard Door Latch, No Lock
_0_ _ _ _ d d
0.00
Door Lock
_K_ _ _ _ • •
43.00
Keyed Latch
_A_ _ _ _ • •
43.00
None
_ _0_ _ _ • •
0.00
Options Chart Illumination
_ _N_ _ _ c c
118.00
None
_ _ _0_ _ • •
0.00
CE Approved
_ _ _K_ _ • •
70.00
CSA Certification, CE Approved
_ _ _L_ _ • •
86.00
CE Mark, FM Approval
_ _ _M_ _ • •
86.00
CE, UL, FM, and CSA Approved
_ _ _N_ _ • •
96.00
UL Listing, CSA Approval
_ _ _P_ _ • •
32.00
FM Approved
_ _ _R_ _ • •
32.00
UL Listing, FM and CSA Approval
_ _ _U_ _ • •
64.00
None
_ _ _ _0_ • •
0.00
Customer ID Tag (30 Character Max.)
_ _ _ _T_ • •
43.00
F3391 Certificate of Performance
_ _ _ _B_ • •
32.00
F3399 Custom Calibration/Test Report _ _ _ _C_ • •
375.00
Certificate of Conformance and ID Tag _ _ _ _D_ • •
75.00
Customer Calibration and ID Tag
_ _ _ _E_ • •
418.00
Printed User’s Manual (English)
_ _ _ _ _E • •
32.00
Pen
Purple, Position #1 (Pack of 6)
82-39-0306-06 • •
28.36
Refills
Red, Position #2 (Pack of 6)
82-39-0202-06 • •
28.36
c Not available with CE approval
d Not available with NEMA4X Door
Controllers
and Programmers
Model Selection Guide
Digital Indicators
Sampling Rate: 3 times per second.
Input Filter: Single pole low-pass section (software), selectable time
constants (off to 120 sec.)
Digital Displays: Vacuum fluorescent, alphanumeric displays. 6-digit
display dedicated to PV. Alternate information displayed at setup. 8digit display shows key selected operating parameters and provides
guidance during setup.
Indicators: Channel PV display (Ch 1, 2); Alarm status (Alm 1, 2); Control
output (Out 1, 2); Remote setpoint (RSP) for Out 1; Temperature (°F/°C)
or engineering unit; Control mode (Auto/Man).
Chart Speed: 8 hrs, 24 hrs, 7 days, or selectable 6–744 hrs/rev.
Case: NEMA 3, molded, foam Noryl™, gasketed door. NEMA4X SS door
optional
Pen: Disposable fiber-tip ink cartridge. Line length: >1000 ft./cartridge.
One pen: Purple, Two pens: Purple and red.
Chart: 12” diameter, standard markings, 4.62” calibrated width.
Approvals: UL approved depending on model. FM approved for Class
I, Div. 2, Groups A-D areas, depending on model. See Model Selection
Guide for restrictions.
Alarm Output: Two SPST electromechanical relays. Relay contact rating:
1A @ 120 VAC, 0.5A @ 240 VAC resistive.
Digital Input: 20 VDC source for external dry contact or isolated solidstate contacts. Selects one configured input.
Totalizers: One or two, depending on model. 8-digit totals with multiplier on digital display.
Auxiliary Linear Output (Option): Can be used as second current output for current duplex modes. 21 mA DC into ±0-1000Ω grounded or
non-grounded load. Output range can be set between 0 and 21 mA,
direct or reverse action.Can be configured for any one of 10 parameters.
Resolution: 12 bits over 0-21 mA; Accuracy: 0.2% full scale; Temperature
stability: 0.03% full scale per °C.
CHART
RECORDERS
Recorders and
Data Acquisition
Specifications
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Combustion Safety
and Efficiency
www.lesman.com
[email protected]
Process Valves
Lesman Instrument Company
V 01.2015
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
V 01.2015
Solids Flow and Motion
CHART
244 RECORDERS
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Lesman Instrument Company
www.lesman.com
[email protected]m
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
DR4500 Truline 12” Circular Chart Recorder
Bulletproof!!!
More than 25 years
of proven reliability!
Controllers and
Programmers
Truline Charts:
t
What You Wanet!
G
u
Is What Yo
Digital Indicators
Time
Date
Parameter Ranges, Engineering
Units for All Measured
Processes
Your Alphanumeric Messages
23:58 04/16/90
P1=0 to 200 GPM
P2=0 to 250 GP/HR
P3=-500 to 500 DEG F
P4=200 to 0 DEG F
014:014 TRULIN
DR4500 Truline
Standard Features
Recorders and
Data Acquisition
Combustion Safety
and Efficiency
Process Valves
• Extreme Accuracy — Typically less than ±1°F for usable thermocouple ranges; meets MIL spec requirement for Type T and Pt100Ω
RTD; ±0.1% or better for voltage ranges.
• Universal Inputs — Standard low-level electrical input signals
are configurable for hassle-free changes in the field. Easily expand
or compress ranges within their limits to meet your specific need.
Mixed input actuations can be displayed on the same linear chart.
Accepts all thermocouples; RTDs (Pt100 or Pt500Ω), relative humidity (0-100%); and voltage/current.
• Transmitter Friendly — An integral 24 VDC power supply and a
4-20 mA input allow operation of up to two transmitters.
• Easy Setup — English prompts and menus walk you through configuration, to simplify setup and reduce risk of improper programming. All configuration data are stored in nonvolatile memory for
safekeeping in the event of a power failure.
• Operator Interface — Chart ranges can be set and reset in the field
simply by keyboard input. The keyboard serves as an integral automatic/manual station to provide bumpless transfer for controllers.
• Data Displayed Brilliantly — Digital displays are read easily at a
distance or in dim light and display all critical information.
• At-a-Glance Processes — Select displays for process variable, setpoint, deviation, alarms, automatic or manual control, temperature
units (°F, °C, or engineering), and setpoint program (run/hold).
•Time/Date — Integral real-time clock provides accurate timing for
the recorder’s time and date printing. A 10-year-life battery backup
assures correct timing even when power fails.
• Flow Totalizer — An optional totalizer eliminates the need for
additional integration hardware, including a mechanical counter.
Pre-programmed software calculates flow totalization.
•Self-Diagnostics — Self-diagnostics check critical operations and
provide error messages that alert you to detected faults. Tests are
performed on power-up or can be run on demand.
Enhanced Features
• Expanded Math Pack Features — Calculate and print mass flow
and BTU values right on the chart with new functions built into
the Math Pack option. Math Pack now includes Summer, Multiple
Divider with Square Root, Multiplier with Square Root, Multiplier
Divider, Multiplier, Subtractor Multiplier, HiLo Select.
• Decimal Point Selection — Additional decimal point selection
comes standard on all models for use with narrow ranges, like pH.
• Additional Auxiliary Output — Add a 4-20 mA output to any
model Truline recorder!
• Chart Timeline — New chart timeline functions come standard.
• More Flexible Totalizer — Improved totalizer option now includes
remote reset, low-flow cutoff, and grand totals.
• Security — Security option lets you install a wire seal over a switch
to prevent entry into configuration. Call Lesman for details.
Options
• Control Outputs — Up to 2 single-loop PID digital controllers are
available, so you can program the exact control actuation for your
process. Field-selectable algorithms include on/off, time, current,
and position-proportioning, and duplex variations for heat-cool.
Optional Autotune selects optimum tuning parameters.
• Digital Input — Switch from automatic to manual control mode, from
direct to reverse controller action, reset the limit controller, or mark
an event from remote location through two dry contact closures.
• Alarm Output — Ties soft alarms to two internal SPST relays to
activate external equipment.
• Chart Illumination — Improves readability in low-light areas.
• Setpoint Ramp/Soak Programming — Lets you program and
store 6 ramp and 6 soak segments. Run or hold of program is keyboard or remote switch selectable.
FDA Milk Safety Branch Reports...
Truline AH/AS/AP models comply with 3A
sanitary standards for use as pasteurization
flow recorder/controllers, and meet the
Grade “A” Pasteurized Milk Ordinance!
HTST Pasteurization Enhancements
Honeywell Truline can handle pasteurization processes based on
flow and temperature. DR45AH High Temperature Short Time (HTST)
recorders monitor, control, and divert product based on temperature.
DR45AP pasteurization flow recorders monitor, control, and divert
product based on flow rates.
The digital reference temperature measurement feature prints the
actual Divert Temperature and Forward Flow Temperature beside the
Divert Pen trace, eliminating user error. Since this feature is built into
the DR4500, it saves on panel space and installation costs.
The DR45AP pasteurization flow recorder can also perform the
functions of a differential pressure switch, controlling the system
back pressure to ensure that proper pressures are maintained in
the pasteurizer. No other single recorder/controller provides the
functions and features included in Honeywell’s DR45AH HTST and
DR45AP pasteurization recorders.
To order the HTST dairy recorder, choose model DR45AH-__. For
the pasteurization flow recorder, choose model DR45AP__.
For more specific information, call Lesman (800)953-7626.
Recorder: Time: 0–23 Hrs, 1–59 Min.; Date: 1–12 Mo.; 1–31 Day; 4-Digit Year
Chart: Speed: 8 hours, 24 hours, 7 days, or selectable in (6–744) hours per
revolution; Continue: Yes/No (Beyond 360° Rotation); Chart Name: Up to
six characters; Header: Yes/No
Pen 1 (Same for Pens 2–4): Pen: Disable or enable; Pen Input: Input 1, PV,
Output, or SP; Chart 1 High/Low Range Values: -999.0 to 9999; Major/ Minor
Chart Divisions: 2 to 10; Units: Up to 5 characters.
Algorithm: Input 2, 3 and 4: Disable or Enable; Relative Humidity: Yes or No;
Atmospheric Pressure: 590–800 mmHg (RH Comp.); Deviation: None,Setpoint,
or Channel 1; Deviation Setpoint: -999.0 to 9999.
Input 1 (Same for Pens 2–4, Except for RF): Decimal Place: None, 1, 2, 3; One
decimal place for nonlinear inputs; Unit Type: °F, °C, or engineering units;
Transmitter Characterization: All nonlinear input types; High/Low Range,
Input Compensation: -999.0 to 9999; Filter 1: 0 to 120 seconds; Sensor Break
Protection: None, Upscale or Downscale; Emissivity: 0.01 to 1.00.
Input Actuations
PV Input
°F
°C
B*
105 to 3300
41 to 1815
E*
-454 to 1832
-270 to 1000
E (low)
-200 to 1100
-133 to 593
J
0 to 1600
-18 to 871
J (low)
20 to 770
-7 to 410
K
-320 to 2500
-196 to 1371
Thermocouples
K (low)
-20 to 1000
-29 to 538
NiNiMoly (N)
32 to 2500
0 to 1371
NiNiMoly (N) (low) 32 to 1260
0 to 682
R, S
0 to 3100
-18 to 1704
T
-300 to 700
-184 to 371
T (low)
-200 to 600
-133 to 316
W5W26
0 to 4200
-18 to 2316
W5W26 (low)
0 to 2240
-18 to 1227
RTD (IEC a=0.00385)100Ω, 500Ω
-300 to 900
-184 to 482
Linear
4 to 20mA; 0-10 mV, 10-50 mV; 1-5V, 0-10V
*Can require field calibration to achieve rated accuracy below 1,000°F for Type
B thermocouple and below -200°F for Type E thermocouple.
Surface
Mounting
Front View
Rear View
Alarms (Indication): Setpoint Value: Engineering Units; Setpoint Type: None,
Inputs 1-4, PV, Deviation, Output, Rate of Change, or Shed; Setpoint State:
High or Low; Hysteresis: 0.0 to 5.0% of span.
Total 1 (Same for 2, 3, and 4): Total: Read only; Reset Total: Yes or No; Total 1:
Disable or Enable; Rate: Minute, hour, or day; Scaling Factor: 1, 10, 100, 1000,
10,000, 100,000, or 1,000,000.
Options
Alarm Output: 2, 4, or 6 relays available. First two are SPST electromechanical
relays rated 1A for 120 VAC and 0.5A for 240 VAC resistive. Relays 3-6 rated
5A for 240 VAC resistive.
Digital Input: 20 VDC source for external dry contact or isolated solid-state
contacts. Selects one configured input.
Communications: 300, 600, 1200, 2400, 4800 baud; Parity: Odd or even;
Characteristics: 4000’ max. length; Two wire, multidrop.
Solids Flow and Motion
Side
View
Controllers
and Programmers
Dimensions
Controller-Configurable Parameters
Controller Operation: Manual; Automatic with local or remote setpoint.
Tuning: Gain or Proportional Band: 0.1 to 999.9; Rate: 0.08 to 10 min.; Reset:
0.02 to 50 min./ repeat or repeats/ min.; Manual Reset: ±100% output; Cycle
Time: 1–120 sec.; Lockout: None to maximum.
Autotune: Step Size: -105% to 105% of output.
Algorithm: Control: On-Off,PID,Proportional Band + Manual Reset,3- Position
Step;Output: Current-Proportional Simplex or Duplex,Position-Proportional,
Time-Proportional, Current Relay Duplex (Heat/Cool).
Control: PID Tuning Sets: 1 or 2; Setpoint Source: Local, Remote, or Local 2;
Ratio (IN2): -20.00 to 20.00; Bias: -999 to 9999; Setpoint Tracking: Yes/No;
Power-up Mode Recall: Manual, Auto using local or remote setpoint; High/
Low Setpoint Limits: 0–100% span; Action: Direct or Reverse; High/Low Output
Limits, Dropoff Value: -5% to 105% output; Deadband: -5% to 25.0%; Output
Hysteresis: 0–5% span; Failsafe Output: Within limits; Proportional Band Units:
Proportional Band (%) or Gain; Reset Units: Repeats/ Min. or Mins./Repeat.
Universal Controller Output Option
On/Off or Time Proportional: SPST electromechanical relay. Normally open
(N/O) or normally closed (N/C) contacts selectable.
On/Off Duplex, 3 Position Step, or Time Proportional Duplex: 2 SPST
electromechanical relays. N/O or N/C contacts selectable.
Current Proportional: 21mADC max.into a grounded or non-grounded load
of ±0-1000Ω. 4–20 mA output range, 0.5% full-scale accuracy.
Position Proportional: 2 SPST relays run motor with 100–1000Ω slidewire.
Current/Time Proportional: For heat/cool applications. 4-20 mA signal fed
into a grounded load of ±0-1000Ω, operating over 50%–100% range, 0.5%
full-scale accuracy; SPST electromechanical relay for time; 5A @ 120 VAC,2.5A
@ 240 VAC resistive, and 50 VA @ 120/240 VAC inductive contact ratings.
Limit Control: FM-approved. Latching relay is de-energized when PV goes
above or below a preset setpoint.Alarm indicator lights when relay is latched.
Resets through a key on the front of the recorder or an external switch.
See next page for Model Selection Guide.
Recorders and
Data Acquisition
Recorder-Configurable Parameters
245
The industry’s most popular circular
chart recorder... prints its own
chart reliably for 25 years!
Specifications
Chart: 12” diameter chart. Thermal sensitive paper.
Stylus Life: Capable of printing one chart per day for ten years.
Minimum Input Span: Fully configurable within limits of selected range.
Input Impedance: RTD: 100Ω per lead max.
Sampling Rate: 2 Inputs: 3 times/sec; 3 or 4 Inputs: Once every 2/3 sec.
Span Step Response Time: 6 seconds max. without filtering.
Input Filter: Single pole low-pass, selectable time constants off to 120 sec.
Indicators: Channel PV display (CH 1, 2, 3, or 4); Alarm status (ALM 1,2); Controller output (OUT 1 or 2); Remote setpoint (RSP); Temperature unit (°F or
°C) or Engineering units; Controller mode (A or MAN).
Digital Indication Accuracy: 1 digit.
Digital Displays: Vacuum fluorescent,alphanumeric 6-digit display dedicated
to process variable. Alternate information displayed at setup. 8-digit display
shows key operating parameters. Also provides configuration guidance.
Deviation Bargraph: 21-segment, color-coded graph: (Green = On Control;
Red = Deviation to ±10% PV).
Transmitter Supply Voltage: 22–26 VDC at input terminal (1.2 watts).
Case: NEMA 3 rated. Molded, foamed-Noryl™ with gasketed door. Stainless
steel or NEMA4X available.
Approval Bodies: CSA and FM approved.
Temperature Range: Ambient: 58°–131°F; Extreme: 32°–131°F.
CHART
RECORDERS
Digital Indicators
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Combustion Safety
and Efficiency
www.lesman.com
[email protected]
Process Valves
Lesman Instrument Company
V 01.2015
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
V 01.2015
Solids Flow and Motion
CHART
246 RECORDERS
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Lesman Instrument Company
www.lesman.com
[email protected]
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
DR4500 Truline 12” Circular Chart Recorder
Model Selection Guide (Part 2)
Ordering Instructions
Make one selection from each table section. Check the availability column
to be sure that the unit you need is available. A finished catalog number
looks like this: DR45AT - _ _ _ _ - _ _ - _ 0 _ - _ - _ _ _ _ _ E - _ 0
Model Selection Guide (Part 1)
Controllers and
Programmers
Digital Indicators
Recorders and
Data Acquisition
Description
Selection
Catalog Avail-
Blue • denotes options in stock at LesmanNumber ability
Price
Truline — Standard Model
DR45AT ↓ $1912.00
Truline — With 6 Relays
DR45AR ↓ 1944.00
Truline — Flow Recorder
DR45AW ↓ 1944.00
Truline — HTST Dairy Recorder*
DR45AH ↓ 3937.00
Truline — Pasteurization Flow Recorder
DR45AP ↓3542.00
Ch. T/C, RTD, mV, 0-5VDC,
1
4-20 mADC, Radiamatic 1 _ _ _ •c•••0.00
0-10 VDC
3 _ _ _ •c•
40.00
None
_ 0 _ _ ••••0.00
Ch. T/C, RTD, mV, 0-5VDC,
Input
2
4-20 mADC, Radiamatic _ 1 _ _ •c•f•386.00
Type
0-10 VDC
_ 3 _ _ •c• 420.00
None
_ _ 0 _ • • •••0.00
Ch. T/C, RTD, mV, 0-5VDC,
3
4-20 mADC, Radiamatic _ _ 1 _ a c aaa386.00
0-10 VDC
_ _ 3 _ aca 420.00
None
_ _ _ 0 • • •••0.00
Ch. T/C, RTD, mV, 0-5VDC,
4
4-20 mADC, Radiamatic _ _ _ 1 b c bbb386.00
0-10 VDC
_ _ _ 3 bcb
420.00
None
0 _
•••
0.00
Control Output 1
1 _
ff 493.00
General Control Output 1, SP Program
4 _
•d 493.00
Control Pulse Output — Non-Control
5 _ •
493.00
Outputs* None
_ 0
• • •••0.00
Control Output 2
_ 1
g493.00
Control Output 2, SP Program
_ 4
hu 493.00
*HTST Model: All options under restrictions must be selected except Channel 3, which
is optional. These selections are all included in base price except for Channel 3.
These Honeywell Trulines are in stock,
ready to ship to you within 24 hours!
Combustion Safety
and Efficiency
DR45AT-1000-00-000-0-00000E-0.............. $1944.00
DR45AT-1000-40-000-0-00000E-0.................2437.00
DR45AT-1100-00-000-0-00000E-0.................2330.00
DR45AT-1110-00-000-0-00000E-0.................2716.00
DR45AT-1111-00-000-0-00000E-0.................3102.00
Add In-Stock Options We stock most option boards, so we can build the
model you need... AND ship within a business day.
Without Waiting
Replacement Pen Arm (Standard) Replacement Abrasion-Resistant Pen
Replacement Charts
Process Valves
Restrictions
a
b
c
d
e
f
g
30756304-501 30756304-502
30755317-001
$181.00
229.00
61.46
Not available without ordering channel 2.
Not available without ordering channel 3.
Not for T/C Types B, N, R, or W. Includes calibration for 200Ω Burns Bulb.
Controller can be set only for 4–20 mA output.
Available only when chart rotation is between 24 and 744 hours.
Option price already included in base price.
Available only with 2 inputs, Control output #1, Option 6_. 4-20 mA output.
Description
Selection
Catalog
Avail-
NumberabilityPrice
AAAAA
DR45 Truline Model
T R W H P
None
0 _ _
•••••$0.00
Auxiliary 4-20 mA Output
1 _ _
•••••204.00
RS485 Modbus Communication
3 _ _
• • •289.00
RS485 Modbus Communication
and 4-20 mA Auxiliary Output
4_ _
• • •428.00
External Truline High-Speed Pen
_ 0 _
•••••0.00
Interface Abrasion-Resistant Pen
_ 1 _ eeeee51.00
None
_ _ 0
•••••0.00
2 Alarm Outputs/2 Digital Inputs
_ _ 1
••• 193.00
4 Alarm Outputs/2 Digital Inputs
_ _ 2
v 193.00
6 Alarm Outputs/2 Digital Inputs
_ _ 3
w 0.00
1 Alarm/Timer Out/2 Digital Inputs
_ _ 4
• • •209.00
None
0 •••••0.00
Software Totalization (Input 1)
A
••• 268.00
Options Totalization (Inputs 1, 2)
E
••• 471.00
Totalization (Inputs 1-4)
H • 589.00
FO Sterilization Calculation
F • 171.00
Math
B• • • 171.00
Totalization (Input 1), Math
K
•402.00
Totalization (Inputs 1,2), Math
L
•600.00
Totalization (Inputs 1-4), Math
M • 718.00
Enclosure and Design Options
Gray Door with Glass Window
0 _ _ _ _ _ ••• 0.00
Gray Door with Acrylic Window
1 _ _ _ _ _ ••• 48.00
Blue Door with Glass Window
5_ _ _ _ _ ••• 0.00
Blue Door with Acrylic Window
6_ _ _ _ _ ••• 48.00
Stainless Steel Door w/ Acrylic Window
3_ _ _ _ _ ••• 477.00
NEMA4X Door with Glass Window
P _ _ _ _ _ ••• 268.00
NEMA4X Door with Acrylic Window
R _ _ _ _ _ ••• 268.00
NEMA4X Door HTST with Divert Lights
S_ _ _ _ _ ••0.00
None
_ 0 _ _ _ _ •••••0.00
Keyed latch
_ A _ _ _ _ •••••43.00
Door lock
_ K _ _ _ _ ••• 43.00
None
_ _ 0 _ _ _ • • • • •0.00
Configuration lockout/chart plate seal
_ _ L _ _ _ •118.00
Lockout/chart plate seal/Illumination
_ _ M _ _ _ •236.00
Chart illumination
_ _ N _ _ _ ••• 118.00
No approvals
_ _ _ 0 _ _ ••••0.00
CE mark
_ _ _ K _ _ • • • 70.00
CE mark, UL listing, CSA approval
_ _ _ L _ _ • • • 86.00
CE mark, FM approval
_ _ _ M_ _ • • • 86.00
CE, UL, FM, CSA approval
_ _ _ N _ _ • • • 96.00
UL listing _ _ _ P _ _ • • • • •32.00
FM approval (Cl 1, Div 2, Gr A-D)
_ _ _ R _ _ • • • 32.00
UL, FM, CSA approval
_ _ _ U _ _ • • • 64.00
None
_ _ _ _ 0 _ • • • • •0.00
Customer ID Tags (30 Character Max)
_ _ _ _ T _ • • • • •43.00
Certificate of Conformance
_ _ _ _ B _ • • • • •32.00
Customer Calibration/Test Report
_ _ _ _ C _ zzzzz375.00
Certificate of Conformance, ID Tag
_ _ _ _ D _ • • • • •75.00
Customer Calibration and ID Tag
_ _ _ _ E _ zzzzz418.00
Product Configuration
_ _ _ _ _ 1 xxxxx214.00
Printed User’s Manual (English)
_ _ _ _ _ E • • • • • 32.00
Blue • denotes options in stock at Lesman
h Available only with 2 inputs, Control output #1, Option 4_.
u Available only with Modbus communications/4-20 mA auxiliary output,
4-20 mA control output and channel 1 and 2 inputs.
v Available only with Control output #1.
w Available only with Control outputs #1 and 2.
x Customer must supply configuration worksheet.
z Customer must supply Input Actuation Type and Range for each input.
Mark on the chart — seven
ways — standard on all
paperless recorders!
Display
Inputs
Scan Time
Discrete I/O
Auxiliary Output
Data Storage
Communications
Displays
Data Security
Networking
Analysis Software
Event Recording
Instrument Depth
Approvals
eZtrend GR
5.7” Color LCD
Up to 12 Input Channels
100 to 500 mSec
Up to 8
None
Minitrend GR
Multitrend GR
5.7” Color LCD
12.1” Color LCD
Up to 16 Input Channels
Up to 48 Input Channels
100 mSec Standard, 20 mSec Linear Input Optional
Up to 16
Up to 48
Up to 4
Up to 8
1–4 GB Internal, 8GB External SD Card
Ethernet Standard, OPC Server Optional
Ethernet, RS485 Standard, OPC Server Optional
Standard Screens Only
Customizable
Customizable
21 CFR Part 11 Password Protection, Extended Security System
Ethernet, Web Ready
TrendManager Pro (See page 256)
Event Markers
7.87”
7.87”
9.72”
Pricing Starts At
See Page
$1803.00
248–249
$2730.00
250–255
$4001.00
250–255
What makes Trendview different?
Fast Input Sampling Rates!
What is Fuzzy Logging?
How Secure is the Data?
Universal input card’s 20 mS scan rate per
pen lets you direct what’s happening in your
process. Enable fuzzy logging data storage and
you’ll have data compression surpassing any
other available method.
A secure storage algorithm delivers a 10:1
compression ratio, for 10 times more stored data,
10 times longer disk duration, and increased
resolution on fast-changing process signals. It
includes a self-teaching function to store data at a
variable rate that matches the monitored process.
Process data and configuration files are encrypted, encoded, and set up with checksums
to prevent undetected changes. And, because
configuration files are stored with the process
data, you’ll know exactly how the recorder was
configured and when data was recorded.
Batch Recording
Continuous Recording
Regulatory Recording
•
•
•
•
•
•
•
•
• Redundant data storage
• Validates to regulatory requirements
• Meets FDA guidelines for electronic data
submittals
• Event configuration audit trail
• Secure data encryption
Automatically graphs batch data
Batch number data identification
Purpose-designed screens for easy use
32 event recipes
Data sampling — up to 50 readings/second
Detailed event reports
Networkable via RS485 or Ethernet
Fuzzy Logging™ data compression
technique
Solids Flow and Motion
Choosing the Right Paperless Recorder
Controllers
and Programmers
247
Digital Indicators
PAPERLESS
RECORDERS
Recorders and
Data Acquisition
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Combustion Safety
and Efficiency
www.lesman.com
[email protected]
Process Valves
Lesman Instrument Company
V 01.2015
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
PAPERLESS
RECORDERS
V 01.2015
Solids Flow and Motion
248
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Lesman Instrument Company
www.lesman.com
[email protected]
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
eZtrend GR 5.7” Display Video Recorder
Controllers and
Programmers
Direct replacement
for Honeywell
eZTrend QXE.
Features
• 5.7” digital color active TFT LCD with 320 x 240 pixel QVGA resolution
• Industrial rugged touchscreen with rapid navigation, clear intuitive operation
• Up to 12 analog inputs; up to 8 DI/DO; 4 pulse inputs optional via digital I/O
• 10/100 Ethernet DHCP, OPC, FTP, TCP/IP, web and E-mail; RS485 Modbus option
• Front USB port standard for keyboard, mouse, or storage drive
• On-board solid state flash memory, 256 MB or 740 MB; Removable USB storage
• 21CFR Part 11 compliant password protection, ESS extended security system
• Remote access advanced software data analysis at your PC, plus remote viewing via web browser
• Independent chart and logging speeds
• Rapid review and replay of data at recorder
• CS, CSA, UL approvals
• NEMA 4X/IP66 enclosure option
Digital Indicators
Recorders and
Data Acquisition
Combustion Safety
and Efficiency
Honeywell eZtrend GR is a cost-effective general service DIN-size
electronic data recorder that easily replaces 100mm paper strip chart
recorder, providing the ability to capture continuous and batch data
electronically. The data is recorded in secure digital format, eliminating
interpolation errors that can arise from transposing the data from a
chart to a spreadsheet for necessary analysis.The paperless solution also
provides a graphical display, unlike paper recorders, which generally use
either scales or digital formats for displaying process variables.
eZtrend GR reliably records electronic data from directly-connected
sensors or transmitters, and displays it in a format that can be used for
documentation of process conditions and process improvement. The
GR’s touchscreen interface makes configuration and operation actions
fast and simple. Graphical icons and menu structure help the user easily
understand how to view the various screens and review the data and
other process information.
The Ethernet feature, and compatible TrendServer Pro software provides plant-wide connectivity of recorders, so those who need to see the
recorder’s data can get easy access to it. And the ability to have data in
electronic format saves significant time and expense. It’s fast and easy
to analyze the electronic data using the compatible software tools to
create custom reports.
Above all, paperless recorders eliminate the cost of consumables, like
pens and paper, and the associated problems with tearing, smudging,
running out of ink or paper mid-batch, paper jams, and the costs associated with storing and retrieving the paper data when it’s needed.
Honeywell X-Series recorders help users with unique data acquisition
problems.Features like AMS2750 Process Recording provide documentation to show compliance to process specifications when being audited
by NADCAP. An Installation Qualification/Operational Qualification (IQ/
OQ) protocol function helps pharmaceutical users with their 21 CFR Part
11 process validation needs.
The GR’s 5” color active matrix TFT display with intuitive bar charts,
digital values, and trend displays, makes it easy to interpret process data
and take action.The heavy duty durable touchscreen provides easy data
entry and quick navigation through the menus. A complete contextual
help system can be accessed on the recorder screen.
The Ethernet connection, with support for a variety of protocols,
provides unlimited connectivity to your local area network. DHCP automatically acquires an IP address for network communications. SNTP
synchronizes the recorder’s clock over the network.The built-in web server
makes all process variables, alarms, and messages viewable through a
standard web browser.
The eZtrend GR has a front USB port for attaching external devices,
like a keyboard, mouse, or USB data storage key.
Firmware credits provide a flexible way of adding features to the
recorder without having to upgrade firmware or add hardware. Credits
can be applied as needed to turn on functionality. See sidebar on page
100 for a detailed description of available credit options.
Data is stored in secure encrypted files, so it’s easy to retrieve data
dependent on process information without having to remember file
names. Up to four levels of password protection are available for up
to 50 users. Multiple levels of password protection and an audit trail of
actions enhance data security.
An Extended Security System (ESS) option extends these features to
include time-out of password entry, password expiration, and traceability
of user actions. ESS is compatible with the requirements of FDA regulation 21CFR part 11 for pharmaceutical use.
Process Valves
Panel Meter
3 Horizontal Trends
w/Vertical Bars
3 Vertical Trends w/Horizontal Bars
6 Vertical Bars
6 Horizontal Bars
Accuracy: ±0.1% or ±0.2% full scale, depending on input type. For a complete
input actuation table, see the X-Series advanced recorders on page 104.
Inputs: 3, 6, or 12 analog input channels; Types: mv, V, mA with external
shunt (provided standard), thermocouple, RTD, and Ohms; Resolution:
0.0015% 16-bit ADC
Display: 5.7” color LCD with touchscreen; QVGA (320 x 240 pixels) resolution; Touchscreen life: One million touches
Data Storage: Local mass storage options: USB memory key up to 2GB,
USB hard drive up to 120 GB; Internal data buffer: Non-volatile 256MB
or 740MB; Setup and screens: Stored internally on non-volatile memory;
Manual saving: Data saved on USB memory stick, saving period related
to log rate, number of pens, totals, and alarms. Each pen is capable of its
own storage rate; Recycling mode: Internal memory has FIFO (first in, first
out) capability, where newest data overwrites the oldest.
Communication: Ethernet 10 base-T connector (standard) sup­ports Modbus
TCP, FTP, internet, DHCP or fixed IP addressing.
Events: User-defined events are recorded and can be set to cause actions,
recording start/stop, digital inputs, alarms, totalizing actions, timers, barcodes. Once an event has been caused, it can produce a set of actions: mark
on chart, relay outputs, recording control, acknowledge alarm, trigger an
event, set/clear relay, screen change, e-mail a message, or reset min/max.
Each event marker can be recorded for analysis.
Alarm Setpoints: Six per pen integral“soft”alarm setpoints announce selected
out-of-limit conditions. User can choose if alarm triggers a change in chart
background color.Can be set for High,Low,Deviation.Latched alarms require
operator acknowledgement. Alarm damping: 1 sec to 24 hours; Hysteresis:
±100% pen scale. Alarm can change the log rate on an affected pen.
Alarm Outputs: Programmable alarm setpoints (six per pen) can be configured to activate up to eight outputs. 200 mS update rate. 4 or 8 relay
contacts SPDT, 3A 240 VAC, 3A 24 VAC/DC, 0.2A 240 VDC; 8 I/O SPNO 1A
24 VDC. Activation: Fully programmable internal alarm levels. Assignable
to any relay output.
Digital Input: Two DI using dry (volt-free) contacts on the 8-relay card
Math: Basic math standard on all X-Series recorders include Add, Subtract,
Multiply, Divide, Modulo, and power. Full maths option supports up to 100
characters freeform math expression for each pen. Includes Sine, Soc, Tan,
Log, Parentheses, comms variables, free memory, and access to any data
item variable.
Totalizers: One totalizer per input.Totalizer value assigned to a pen for display
and storage. Totalization values are 10 digits plus exponent.
Approvals: CSA optional CSA22.2No.1010.1-2004 Cert #L211230. UL ANSI/
UL61010-1-2004 File #201698, CE mark
Enclosure Rating: Front panel designed to NEMA 3/IP54. Available with
NEMA 4X, IP66.
Make one selection from each table section below. Follow the
availability column down, and check any notes to be sure the unit
you need is available. A finished catalog number looks like this:
TVEZGR-_ _-_ _ _ - _ _ - _ - _ _ _ - _ _ _ _ _ _ - 000
Model Selection Guide
Description
CatalogAvail-
Numberability Price
eZtrend QXe Advanced Paperless Recorder
Analog
3 Analog Inputs (IN1-IN3)
Inputs 6 Analog Inputs (IN1-IN6)
Expansion None
Card
Board for Option Cards
Analog
None
Input Card 6 Analog Inputs (IN9-IN14)
Discrete
None
Inputs/
4 Relay Outputs
Outputs
8 Relay/2 Digital IN, 6 Fixed Out,
Card
+2 Configurable DI/DO
8 Configurable DI/24V Out
Power
90-240 VAC US Power Cord
24 VDC Instrument Power
Input Freq. 50 Hz
Filter Value 60 Hz
Data
1GB Internal, 8GB Front SD Card
Memory
2GB Internal, 8GB Front SD Card
4GB Internal, 8GB Front SD Card
Security
None
Options
ESS Extended System Security
10 Credits
20 Credits
Firmware
30 Credits
Credits
50 Credits
60 Credits
75 Credits
99 Credits
Case/
Panel Mount
Mount
Panel Mount with Rear Cover
User
Product CD and Trendviewer
Documents Print Manual, Trendviewer CD
None
Tagging
Stainless Steel Tag
CE Mark, IP54, NEMA 3
Standards CE Mark, IP66, NEMA 4X
CE, UL, CSA, IP66, NEMA 4X
Certificates None
F3391 Cert of Conformance
F3399 Custom Calibration Test
F3391 and F3399 Certificates
None
Software
TrendManager Pro
TrendServer Pro
TrendServer Pro with OPC
TVEZGR- 3 _-
6 _-
_ 0-
_ 1-
0 _ _-
6 _ _-
_ 00-
_ 10-
↓$1803.00
(1)
0.00
(1)
309.00
•
0.00
(2)
82.00
•
0.00
(3, c)
618.00
•
0.00
(c)
232.00
_ 20-
(4, c)
_ 30-
(5, c)
2 _-
•
5 _-
•
_ 1-
(7)
_ 2-
(7)
3-
•
4-
•
5-
•
0 _ _-
•
S _ _-
•
_ 10-
•
_ 20-
•
_ 30-
•
_ 50-
•
_ 60-
•
_ 70-
•
_ 90-
•
0 _ _ _ _ _
•
R _ _ _ _ _ (12)
_ 0 _ _ _ _
•
_ U _ _ _ _
•
_ _ 0 _ _ _
•
_ _ S _ _ _ (10)
_ _ _ 0 _ _
•
_ _ _ 1 _ _
•
_ _ _ 3 _ _
•
_ _ _ _ 0 _
•
_ _ _ _ B _
•
_ _ _ _ C _ (11)
_ _ _ _ E _ (11)
_ _ _ _ _ 0
•
_ _ _ _ _ P (13)
_ _ _ _ _ S (13)
_ _ _ _ _ T (13)
283.00
283.00
0.00
221.00
0.00
0.00
63.00
184.00
378.00
0.00
210.00
331.00
601.00
756.00
1103.00
1239.00
1313.00
1444.00
0.00
79.00
0.00
21.00
0.00
37.00
0.00
53.00
77.00
0.00
33.00
282.00
305.00
0.00
331.00
546.00
814.00
Notes and Restrictions
c. Requires Expansion Board.
1. Standard inputs include T/C, mV, V, mA, ohms, and RTD actuations.
2. Required when ordering analog input, discrete input/output, or communications/transmitter power card options.
3. Analog input card supports T/C, mV, V, mA, ohms, and RTD actuations, with
enhanced input isolation.
4. Relay outputs are high level: 3 Amp, 240 VAC non-inductive load
5. Discrete outputs are low level: 1 Amp, 24 VDC non-inductive loads. Any channel
on the 8 discrete I/O card can be used as a digital input if NOT used as alarm
output. Up to 4 channels can be used as pulse input up to 1 KHz
7. Factory set to this frequency, but can be changed in the setup menu.
10. Customer must supply tagging information. Up to 3 lines, 22 characters ea.
11. Calibration test reports and certificates require specific range and input actuation data from customer. Call Lesman for Form F3399.
13. Software packages can be ordered separately. See page 256.
Solids Flow and Motion
Ordering Instructions
Controllers
and Programmers
Specifications
249
Digital Indicators
for
Visit Lesman.com user
s,
full specification e.
or
m
d
an
,
manuals
PAPERLESS
RECORDERS
Recorders and
Data Acquisition
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Combustion Safety
and Efficiency
www.lesman.com
[email protected]
Process Valves
Lesman Instrument Company
V 01.2015
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
PAPERLESS
RECORDERS
V 01.2015
Solids Flow and Motion
250
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Lesman Instrument Company
www.lesman.com
[email protected]
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
X-Series GR Advanced Graphic Recorders
perless
Best-in-class dpadisplay
recording an
technology!
easier
New, friendlier,
e!
us
to
Controllers and
Programmers
Features
•Crystal Clear Display
• Minitrend GR: 5.7” High Resolution Digital Color LCD
• Multitrend GR: 12.1” High Resolution Digital Color LCD
• Industrial rugged touchscreen with pushbutton navigation
• Clear and intuitive menu operation
• Custom screens
• Flexible Universal Input Options
• Minitrend GR: Up to 16 Analog Inputs
• Multitrend GR: Up to 48 Analog Inputs
•Comprehensive Connectivity
• TCP/IP and RS-485 Modbus Protocol
• 10/100 Ethernet (DHCP), web, FTP, OPC
• USB ports for keyboard and mouse and memory
Digital Indicators
Recorders and
Data Acquisition
Combustion Safety
and Efficiency
•Data Storage
• On-board non-volatile memory — up to 3.7GB
• Removable SD Flash and USB storage
• No moving parts — all solid state data storage
•Stringent Security for Total Data integrity
• Password Protection — 21CFR Part 11 Compliant
• Extended Security System (ESS)
• Wire seal provision
Plus...
• Date export in Comma Separated Variable (CSV) format
• NEMA 4X/IP66 option
• Health Watch for preventative maintenance
• Remote Access — Advanced data analysis at your PC
• Independent chart and logging speeds
• Rapid review and replay of data at recorder
• Approvals — CE, CSA, UL, FM
• Up to 50Hz (20 msec) Logging
Inputs and Outputs
Standard Screens
Soft Alarms: Six software alarms per pen are easily set up to display
and record selected out-of-limit conditions. These can be tied to the
relay or digital outputs to activate the user’s external equipment.
Single Relay Output: A separate relay alarm output at the rear of the
unit can be set up as an alarm output.
Alarm Card: Four or eight SPDT relay contacts 240V, 8 I/O or 16 I/O, 24
VDC. Programmable alarm setpoints can be configured to activate
up to 16 outputs.
Analog Output: Two or four 0-20 or 4-20 mA outputs per card.
Digital Input: Up to 12 digital inputs let you initiate, through a dry
contact closure, selected recorder functions.
Pulse Counting: Up to four frequency inputs per board, are available
to count signals up to 25 kHz (max. 2 cards).
Digital screens display combinations of charts, bars and digital data
can be configured.Minitrend GR supports up to 20 screens, Multitrend GR
supports up to 32. A small sample of standard screens are shown below.
Logarithmic Scales: Displayed scales can be set linear or logarithmic.
Replay with Zoom: Select replay mode and zoom-in on a specific
area on the screen. The touch screen makes it fast to review and
analyze historical data.
Display
Process Valves
Display: 5.7” or 12.1” Color Active TFT with more than 256,000 colors
makes it easy to interpret process data and take action. Features
intuitive bar charts, digital values, trends or customized displays. A
screen saver can be set to extend the life of the backlight.
Touch Screen: Heavy-duty durable touch screen provides easy data
entry and rapid navigation though the menus.
Help Files: Complete contextual help system can be accessed and
visualized on the screen of the recorder.
Get full product specifications and manuals at
Lesman.com.
splays can
X-Series LCD di
to show any
be programmed
ta formats
da
combination of
your process
you need to fit
, trends, and
— charts, bars
data with tags.
Data Storage
Honeywell’s credits system is a flexible way of adding to the recorder
features without a firmware upgrade. Credits can be used to add functions
until the total number of credits purchased has been depleted.Additional
credits can be purchased later and added to a recorder after installation.
Firmware Options
Note: Extra Pens can be used to display and store the results of calculations,
totalizers, counting, variables imported via communications, or to store values.
Free Form Math (4 credits): Handles math expressions that can consist of expressions up to 100 characters in length. (See Note)
Free Form Math with Scripting (6 credits): Powerful multi-line
scripting ability solves complex state based applications. (See Note)
Fast Scanning Mode (5 credits): Sample rate of 50 samples/second
for up to eight pens (20 mSec/sample)
Totalizer/Sterilization Calculation (4 credits): Each pen can be associated with a totalizer. Totalized values can be displayed and recorded;
multiple totals can be calculated from the same variable. The totalizer
function can handle Fo and Po Sterilization calculation. (See Note)
Extra Pens (2 credits): 4 extra pens to store and display totalized
values, results of calculations, etc. Minitrend supports up to 16 extra
pens, Multitrend supports up to 48 extra pens.
Custom Screens (4 credits): Import custom built screens that have
been created in X Series Screen Designer.
Events (6 credits): Into/out of alarm, Ack, start, stop, reset totals, digital input On/Off/state change, T/C burnout, mark chart, start/stop
logging, digital output On/Off.
Password Net Sync (5 credits): Password change on one recorder
replicates to other records on the same subnet
Batch/Groups (5 credits): Ability to run batches with Start, Stop,
Pause, and Abort. Up to 6 concurrent, asynchronous batches.
Printer Capability (2 credits): Provides ability to print recorder status
text screens to USB PCL 1 printer.
Remote View (3 credits): Extends the recorder’s user interface to a
PC. Provides full remote control of the unit via a web browser.
OPC Server (10 credits): OPC-compliant software for real-time data
exchange between servers and clients (recorders,controllers,PLCs,etc.)
HealthWatch/ Maintenance (2 credits): Keeps track of critical recorder
“life actions” for diagnostics and preventative maintenance. Includes
birth date, power cycles,Time On/Off, Hi/Lo CJC values, hardware/software version,relay operations,calibration date and backlight operation
Modbus Master (10 credits): Fetches data from modbus slaves.
Password Net Synch (5 credits): Password change on one recorder is
replicated on other recorders on the same subnet.
Hardware Lock (2 credits): Locks out hardware configuration.
E-mail (3 credits): Send e-mail on alarm or event.
Reports (3 credits): Generates min/max totals, averages, current pen
value reports as .RTF files. Print, e-mail, or export to flash drive.
Secure Communications (3 credits): Conforms to DPWS (Device
Profile for Web Services).
Communications
Ethernet: Ethernet (DHCP standard) connection provides unlimited
connectivity to local area networks (LANs).
RS-485 Modbus: Lets process data be transferred to other devices or
to record data received in MODBUS RTU slave mode.
Simple Network Time Protocol (SNTP): Recorder time can be synchronized over the Ethernet network via a SNTP client.
Web Server: With the recorder connected to a LAN, all process variables,
alarm and messages can be viewed from an Internet browser.
Recorders and
Data Acquisition
Firmware Credit System
Internal Data Storage: At least 256MB expandable internal non-volatile flash memory is available for data storage and chart history.
Internal memory capacity (days) / Logging rate = 1 sec
Pens 256MB
740MB
1850MB
3.7GB
4
172 days
1000 days
1222 days
4960 days
8
86 days
500 days
611 days
2480 days
16
43 days
250 days
311 days
1240 days
32
21 days
62 days
155 days
310 days
48
14 days
40 days
103 days
206 days
Data Export: Removable SD flash and USB flash storage device provides multiple data storage alternatives. Data is stored in a secure
binary encrypted format, with the recorder’s configurations, providing added security of the data files.
External USB Devices: The recorder has two USB host ports, one
front and one rear, for attaching external devices (keyboard, mouse
or a data storage key). The keyboard and mouse can be used to
navigate the recorder’s screen along with text entry.
Remote Control: Extends the recorder’s user interface onto a desktop
PC. Providing full remote control of the unit through a web browser.
Independent Chart Speeds and Logging Rates: Logging rates can
be programmed completely separate from the chart speed, so data
can be displayed and stored at rates that best suit the applications.
Fuzzy Logging: Increases storage capacity, with data compression up
to 100:1 or more. Data is monitored to determine changes in process
data. If no changes are observed, data is logged periodically. If data
changes rapidly, it is recorded normally at the programmed rate.
Solids Flow and Motion
251
Controllers
and Programmers
PAPERLESS
RECORDERS
Digital Indicators
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Security
Total Data Integrity: Data is stored in secure encrypted files making it
easy to retrieve the data dependent on process information. Data is
automatically recognized without having to remember file names.
Password Protection: Up to 4 levels of password protection with up
to 50 different users are available. Multiple levels of password protection and audit trail of actions enhance the security of the data.
Extended Security System: ESS provides extended features including entry of unique User IDs and associated passwords, time-out
of password entry, password expiration, and traceability of user
actions. ESS is compatible with the requirements of 21CFR part 11.
Security Tag: “Wire seal provision” that provides added security to
seal the front door and rear wiring when using optional rear cover
to prevent undetected entry to these areas of the recorder.
Other Features
24VAC/DC or 48VDC Power Supply: 20 to 50 VDC, 20 to 30VAC
24VDC Transmitter Loop Power: Minitrend supplies up to 200mA
(not DC version). Multitrend supplies up to 1 Amp
Enclosure Rating: Standard NEMA 3/IP55 type front face protection.
NEMA 4X/IP66 available as an option.
Approvals: CSA, UL and FM CL1 Div 2 approvals. CE conformity.
Combustion Safety
and Efficiency
www.lesman.com
[email protected]
Process Valves
Lesman Instrument Company
V 01.2015
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
PAPERLESS
RECORDERS
V 01.2015
Solids Flow and Motion
252
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Lesman Instrument Company
www.lesman.com
[email protected]
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
X-Series GR Advanced Graphic Recorders
Minitrend GR is
direct replacement
for Honeywell
Minitrend QX.
Multitrend GR
is the direct
replacement
for Honeywell
Multitrend SX.
Controllers and
Programmers
Specifications
Design Attributes
Digital Indicators
Recorders and
Data Acquisition
Combustion Safety
and Efficiency
Process Valves
Display: Minitrend GR: 5.7” digital color touchscreen LCD (TFT), QVGA (640 x
480 pixels) resolution, backlight lifetime to 55,000 hours; Multitrend GR: 12.1”
digital color touchscreen LCD (TFT), SVGA (1024 x 768 pixels) resolution,
backlight lifetime to 43,000 hours
Screen Presets: Screen Saver: Set in minutes from 1 to 180, can dim the screen
or switch off; Brightness: Adjustable 10–100%, default at 80%; Maximum
luminosity: 400 cd/m2.
Display Update Rate: Display values updated every second
Status Display: A status bar, at the top of the recorder’s screen, displays the
real-time icons of the recorder status, (time left and alarm active).
Communications: Ethernet 10/100Base-T with RJ45 connector supporting
Modbus/TCP, FTP, Internet, DHCP or fixed IP address. RS485 Modbus RTU
(up to 115200 baud rate).
Mathematics: Add, Subtract, Multiply and Divide. Free form/scripting math
option, up to 100 characters free form math expression for each pen.
USB Ports: USB host ports front and rear for data and setup transfers.Keyboard
or mouse, barcode reader, or external mass storage device.
Standard and Custom Screens: Fully programmable display values in engineering units. Time/date stamp on every division. Standard screens display
data, digital reading, bargraphs or combinations. Custom screens created in
Screen Designer software can be imported.(Custom Screen firmware option is
required.) Digital values displayed include alarms on bars, engineering units,
pen name, tag, time and date, 20 character description and totalized values.
Data Storage: Removable Media: SD Flash card, supports up to 8.0Gb. Local
Mass Storage: USB memory key up to 120Gb, USB hard drive up to 120Gb;
Internal Data Buffer: Non-volatile. 256MB to 3.7 Gb (50 million to 1.2 billion
points); Setup and Screens: Stored internally on non-volatile memory; Data
Saving Period: Related to log rate, number of pens, totals and alarms. Data
Format: Honeywell binary encoded format; Recycling Mode: First In First Out
Power Requirements: Voltage (VRMS): 90VAC to 250 VAC (auto select). Frequency: 50/60Hz; Optional Instrument Power: 20 to 50 VDC/20 to 30 VAC
Common Relay Output (SPNC): NC common alarm relay: Two contacts,
normally closed when the recorder is powered. Rating 24 V, 1 Amp.
Battery: Battery backup for clock, Lithium battery. 10 years life (Recorder
powered), 4 years life, typical (Recorder unpowered).
Clock: Tolerance: ±20ppm to a resolution of 1 second at 25° C. Format selectable for MM/DD/YYYY or DD/MM/YYYY Summer/Winter manual time
adjustment or via communications. SNTP Client or Server included for
synchronizing over Ethernet.
Alarm Setpoints: 6 per pen integral soft alarm setpoints announce selected
out-of-limit conditions; Alarm triggers can be set for Hi,Lo,Deviation (latched
or unlatched) for alarm acknowledgement. Alarm Damping: 1 sec to 24
Hours; Hysteresis: ±100% of pen scale; Common relay output: 1A 24 V, can
be activated on any alarm.
Display Chart Speeds: Independent of logging rate. 3 chart rate categories:
Slow = 1, 5, or 10 mm/hour. Medium = 20, 30, 60, or 120 mm/hour. Fast =
300, 600, 1200, or 6000 mm/hour. Combinations of rates can be mixed, and
chart speeds can be set independently for each chart.
Data Replay Mode: Data replay facility on chart displays at normal, fast or
slow speeds with zoom and cursor.
Recorder Identification: Recorder name, Screen name, Time and Date.
Messages Screen: Message screen displays system information, and records
any setup activity that has been changed. It also provides warning and
error message updates, lists alarm activity and will display user-defined
marks on a chart.
Password Protection: Multiple Administrator control of password setup and
management with four levels of password protection. Up to 50 different
users available. Password protection restricts user entry to recorder setup
and specific screens. Engineer: Highest access to all levels. Supervisor: Next
highest level, including access to levels below. Technician: Third level, including operator access. Operator: Lowest level of access.
CE Conformity (CE Mark): Conforms with the protection requirements of
the following European Council Directives: 73/23/EEC, the Low Voltage
Directive, and 89/336/EEC, the EMC Directive.
Immunity Product Classification: Complies with EN61326 Class I: Cord
Connected, Panel Mounted Industrial Control Equipment with protective
earthing (grounding). (EN 61010-1)
Enclosure Rating: Front panel NEMA3/IP55 (Optional NEMA 4 / IP66)
Installation Requirements: Category II Overvoltage (EN 61010-1) Pollution
Degree 2
EMC Standards Safety: Emissions: EN61326 Class B; Immunity: EN61326 Industrial Levels Complies with EN61010-1: 2001. Panel Mounted Equipment,
Terminals must be enclosed within the panel.
Analog Inputs
Number of Inputs: Minitrend: 4, 6, 8, 12 or 16 input channels; Multitrend: 4, 6, 8,
12, 16, 24, 32, 40, or 48 input channels; Visit Lesman.com for input actuations.
Minimum Input Span: Fully configurable with span limitation of the range
selected with 4% under-range to 4% over-range capability (50V Range 2%)
Burnout (T/C): High, Low or None
Cold Junction Compensation: Internal compensation with the ability to
manually adjust values, External Input for compensation, External CJC
value specified
Input Resolution: 0.0015% (16 Bit ADC)
Input Impedance: Current loop resistance: DC: 10Ω, use ±0.1% external resistor; All others: >1 MΩ (Volts >10MΩ)
Source Impedance: T/C and RTD: 100Ω per lead maximum (CU10 = 15Ω)
Square Root Extraction: Standard on every input type
Sensor Compensation: Single and Dual point
Input Sampling Rate: Available slots support up to 8 analog inputs each
(Minitrend QX has 2 slots, Multitrend SX has 6); the input sampling rate is
dependent on actuation type. All Inputs: 100mS (10Hz), 200 mS (5Hz), 500
mS (2Hz); Fast Sampling: 20 mS (50Hz) for mA, mV and volts only
Input Sampling Method: Sample, Average, Min/Max, can be set independently per pen
Scales, Linear, Logarithmic: Linear: -999999 to 999999; Decimal: Automatic
or programmable; Engineering units, user definable First channel in Screen
Layout determines display chart scale Logarithmic: 1 to 99 decades
Input Isolation: 300VAC channel-to-channel, channel-to-ground
Noise Rejection (at 50/60Hz) ±2%: Common Mode: 2, 5, and 10Hz = -120dB;
Normal Mode: 2Hz = -85dB, 5Hz = -80dB, 10Hz = -48dB
Options
Pulse Input: 4 isolated inputs per board, frequency 1Hz to 25kHz, updated
once per sec. Input: Low <1V, High >4V to <50V or Volt free input: Low =
short circuit, High = open circuit.
Alarm Outputs: Programmable alarm setpoints (6 per pen) can be configured
to activate up to 16 outputs. Update rate: 200 ms for all alarms. 4 or 8 relay
contacts: SPDT, 3A 240VAC, 3A 24VAC/DC, 0.2A 240VDC (non-inductive,
internally suppressed); 8 I/O or 16 I/O: 1A 24VDC (non-inductive, internally
suppressed); Activation: Fully programmable internal alarm levels. Assignable to any relay or discrete output.
Digital Input/Output: 8 I/O or 16 I/O: All channels may be selected freely as
either digital inputs or outputs. 4 relay outputs: all four channels are relay
outputs only. 8 relays/ 2 DI card: Two outputs can be configured for use as
digital inputs.If the 2 Digital inputs are used only 6 relay outputs are available.
Analog Outputs (Retransmission): 2 or 4 retransmission outputs available; a
pen drives each output. Analog inputs, totalized values or any mathematical
result can be retransmitted. Update Rate: 250 msec all channels; Accuracy:
±0.1% 0-500Ω load, ±0.25% 500Ω 1K load; Type: 0–20 / 4–20 mA; Maximum
Load Resistance: 1000Ω; Resolution: 0.002%; Isolation: 300VAC
Transmitter Power: Mini: 200 mA @ 24 VDC ± 3 VDC. Multi: 1A @ 24 VDC.
Extended Security System (ESS): Compliant with 21 CFR Part 11. Includes
features for entry of unique user IDs and passwords, timeout on inactivity
(1 to 10 min.), password expiration (1 to 365 days), up to 50 users, password
re-entry lock out for incorrect entry of password more than 3 times, no reuse
of passwords (programmable 4 to 12 times), traceability by user name.
Totalizer/Sterilization: One totalizer per input. Totalizer value must be assigned to a pen for display and storage. Multiple totalizations (Math option)
are possible by using extra pens. Reset may be manual or programmed.
Totalization values are ten digits plus exponent. Each pen can be totalized
according to Fo or Po Sterilization function at 250 °F. Standard reference
temperature and thermal resistance (Z Value) are fully adjustable values of
X, Y, W and V. Start temp, Reference temp and Z factor are all user defined,
allowing support for many different types of Sterilization applications.
Identification: Optional customer ID Tagging (3 lines, 22 characters each)
Math Algorithms: All analog input channels have a math expression block.
Fully programmable 100-character free form math expression per pen.Math
calculations available, one per input plus 16 extra pens. Scripting maths
includes conditions and multiline scripting in pen maths expressions. Allow
functions, permanent variables and constants.
HealthWatch/Maintenance: Recorder keeps track of Birth Date,Power cycles,
Time-On/Time-Off,Hi/Lo CJC value,Hardware/ Firmware updates,Calibration
Dates and Backlight operation.
Custom Screens: Provides recorder the capability to accept custom screen
designs from the Screen Designer software. Depending on the size of the
screen designs, up to 10 screens can be loaded into the recorder memory.
OPC Server: OPC UA compliant.Totalizers and up to 96 pens can be transmitted via OPC server, max poll rate 1/s (Available 2014).
Approvals: CSA: CSA22.2-No.1010.1-2004 Certificate Number L211230. UL:
ANSI/UL61010-1-2004 File # 201698. FM: Class 1 Division 2
Solids Flow and Motion
Method: Sample, Average, Min/Max. Can be set independently per pen
Logging Types: Continuous, Fuzzy
Logging Rate: 20 msec. to 4 days per pen
Fuzzy Logging: Secure data storage technique that delivers data compression ratio of 100:1 or more; Self teaching, storing the data at a variable rate
to match the process
253
Physical Parameters
Enclosure/Bezel: Zinc plated steel case with high impact resistant polycarbonate bezel; scratch resistant lens.NEMA 3/IP55 protection rating standard,
Optional NEMA 4 / IP66 (Front face only)
Mounting Panel: Unlimited mounting angle. For best display view, the angle
should not exceed 65° from left or right, 65° looking down and 40° looking
up. Mounting adjustable for panel thickness of 2mm to 100mm. Adapter
kits available for covering existing panel cutouts.
Dimensions (WHD): Minitrend: 5.67” x 5.67” x 7.87”; 5.43” (Full DIN) square
cutout; Multitrend: 11.34” x 11.34” x 9.72”; 11.06” square panel cutout. Both
Models: Additional 3.15” clearance recommended for a straight-type power
cable and signal connectors.
Wiring Connections: IEC Power Plug. Removable terminal strip for input
and alarm connections
Environmental and Operating Conditions
Ambient Temperature: 32° to 122°F (0° to 50°C)
Relative Humidity (%RH): 10 to 90%
Vibration: Frequency: 0 to 70 Hz; Acceleration: 0.1g
Mechanical Shock: Acceleration: 1g; Duration: 30 ms
Mounting Position from Vertical: Tilted Forward: ±40°; Tilted Backward: ±65°;
Tilted to Side: ±65°
Warm Up: 30 minutes minimum
Seismic Qualification: Complies with IEEE 323-1974 and/or 1983 and IEEE
344-1975 and/or 1987 (optional)
Digital Indicators
Logging
PAPERLESS
RECORDERS
Controllers
and Programmers
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Recorders and
Data Acquisition
www.lesman.com
[email protected]
Combustion Safety
and Efficiency
Lesman Instrument Company
V 01.2015
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Batch Monitoring with a Paperless Recorder!
Creating Batch Markers
Users start, stop, pause, or resume from touchscreen push buttons.
• Batch actions: Start or end of batch, batch pause, resume, or abort.
• Batch identifiers: Four batch tag fields can be used to include batch
name, batch description, lot number, user ID, and comments, fields
can be custom named.
• View batches: At database (on PC) or recorder using Batch icon.
• Filter events/batches: By batch name, date/time, or event type.
• Export batch data: Export from TrendManager Pro to Excel on your
choice of single or multiple spreadsheets. This makes analysis and
graphing of data in Excel quicker and easier, reducing the time to
manually organize data into a single spreadsheet.
e in your
Already availabl
corder.
X-Series GR re
ware
rm
fi
Just add 11 ent and
Ev
r
fo
credits
Batch options.
Process Valves
Batch capabilities
PAPERLESS
RECORDERS
V 01.2015
Solids Flow and Motion
254
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Lesman Instrument Company
www.lesman.com
[email protected]
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Ordering Instructions
Choose one option from each table section. Follow the availability column
down to view any restrictions. A finished catalog number looks like this:
TVMIGR-_ _ - _ - _ _ - _ - _ _ _ - _ _ _ _ _ _ -000 or
TVMUGR- _ _ _ _ _ _ - _ _ _ - _ _ - _ - _ _ _ - _ _ _ _ _ _ -000
Model Selection Guide
Controllers and
Programmers
Digital Indicators
Recorders and
Data Acquisition
Combustion Safety
and Efficiency
Process Valves
CatalogAvail-
Description
Numberability Price
Minitrend GR 5.7” Graphics RecorderTVMIGR-
↓$2730.00
Slot A
None
0 _
•
0.00
Four Analog Inputs
4 _
•
420.00
Six Analog Inputs
6 _
•
578.00
Eight Analog Inputs
8 _
•
735.00
Four Pulse Inputs
P _
•
578.00
Slot B
None
_ 0
•
0.00
Four Additional Analog Inputs
_ 4
a
420.00
Six Analog Inputs
_ 6
f
578.00
Eight Analog Inputs
_ 8
f
735.00
Four Pulse Inputs
_ P
f
578.00
Two Analog Outputs
_ A
•
437.00
Four Analog Outputs
_ B
•
655.00
Slot G
None (1 Discrete Output Std)
0
•
0.00
Discrete Four Relay Outputs
1
•
315.00
I/O
8 Relays, 2 Digital Inputs
2
•
368.00
8 Configurable DI/Discrete 24V Out
3
•
368.00
16 Configurable DI/Discrete 24V Out
4
•
525.00
For the rest of the Minitrend GR model options, go to the table at the right)
Multitrend GR 12.1” Graphics Recorder
TVMUGR- ↓4001.00
Slot A
None
0 _ _ _ _ _ •
0.00
Four Analog Inputs
4 _ _ _ _ _ •
525.00
Six Analog Inputs
6 _ _ _ _ _ •
630.00
Eight Analog Inputs
8 _ _ _ _ _ •
735.00
Four Pulse Inputs
P _ _ _ _ _ •
578.00
Slot B
None
_ 0 _ _ _ _ •
0.00
Four Analog Inputs
_ 4 _ _ _ _ g
525.00
Eight Analog Inputs
_ 8 _ _ _ _ g
735.00
Four Pulse Inputs
_ P _ _ _ _ g
578.00
Slot C
None
_ _ 0 _ _ _ •
0.00
Eight Analog Inputs
_ _ 8 _ _ _ g
735.00
Four Pulse Inputs
_ _ P _ _ _ g
578.00
Slot D
None
_ _ _ 0 _ _ •
0.00
Eight Analog Inputs
_ _ _ 8 _ _ g
735.00
Four Pulse Inputs
_ _ _ P _ _ g
578.00
Slot E
None
_ _ _ _ 0 _ •
0.00
Eight Analog Inputs
_ _ _ _ 8 _ g
735.00
Four Pulse Inputs
_ _ _ _ P _ g
578.00
Two Analog Outputs
_ _ _ _ A _ •
437.00
Four Analog Outputs
_ _ _ _ B _ •
655.00
Slot F
None
_ _ _ _ _ 0 •
0.00
Eight Analog Inputs
_ _ _ _ _ 8 g
735.00
Four Pulse Inputs
_ _ _ _ _ P g
578.00
Two Analog Outputs
_ _ _ _ _ A •
437.00
Four Analog Outputs
_ _ _ _ _ B •
655.00
Slot G
None (1 Discrete Output Std)
0 _ _ •
0.00
Discrete Four Relay Outputs
1 _ _ •
315.00
I/O
8 Relays, 2 Digital Inputs
2 _ _ •
368.00
8 Configurable DI/Discrete 24V Out
3 _ _ •
368.00
16 Configurable DI/Discrete 24V Out
4 _ _ •
525.00
Slot H
None _ 0 _ •
0.00
Discrete Four Relay Outputs
_ 1 _ •
315.00
I/O
8 Relays, 2 Digital Inputs
_ 2 _ •
368.00
8 Configurable DI/Discrete 24V Out
_ 3 _ •
368.00
16 Configurable DI/Discrete 24V Out
_ 4 _ •
525.00
Slot I
None _ _ 0 •
0.00
Discrete Four Relay Outputs
_ _ 1 •
315.00
I/O
8 Relays, 2 Digital Inputs
_ _ 2 •
368.00
8 Configurable DI/Discrete 24V Out
_ _ 3 •
368.00
16 Configurable DI/Discrete 24V Out
_ _ 4 •
525.00
(For the rest of the Multitrend GR model options, continue to the next table.)
Each X-Series GR unit comes with an SD flash card, mounting clamps, CD-ROM
with user manual and TrendViewer software, printed Quick-Start guide, precision
10Ω resistors (one per analog input), two touchscreen stylii, power cord or connector, and I/O connectors.
Multitrend GR is a direct
replacement for the
retired Multitrend SX.
Minitrend GR is direct
replacement for the
retired Minitrend QX.
Model Selection Guide (Continued)
Description
Options for Advanced Graphic Recorder
90-240 VAC, US Plug
Power 90-240 VAC, US, Transmitter Power
24 VDC Instrument Power
50 Hz Input Frequency Filter Value
60 Hz Input Frequency Filter Value
Memory 1GB Internal, 8GB Front SD Card
Card
2GB Internal, 8GB Front SD Card
Storage 4GB Internal, 8GB Front SD Card
Security None
Extended Security System
Ten Credits
Twenty Credits
Firm-
Thirty Credits
ware
Forty Credits
Credits Fifty Credits
Sixty Credits
Seventy Five Credits
Ninety Nine Credits
Case/
Standard Panel Mount
Mount Standard Panel Mount, Rear Cover
Manual TrendViewer, Manual on CD
TrendViewer on CD, Printed Manual
None
Tags
Stainless Steel Tag (3 Line x 22 Char)
CE Mark, IP55, NEMA 3
CE Mark, IP66, NEMA 4X
Appro- CE, UL, CSA Approvals, IP55, NEMA 3
vals
CE, UL, CSA Approvals, IP66, NEMA 4X
CE, FM Class 1 Div 2, IP66, NEMA 4X
CE, UL, CSA/FM Cl1 Dv2, IP66, NEMA 4X
None
Certifi- F3391 Certificate of Conformance
cates
F3399 Calibration Test Report
F3391 and F3399 Reports
None
TrendManager Pro Single License
Soft-
TrendServer Pro Single License
ware
TrendServer Pro with OPC Single Lic
Screen Designer, TrendViewer
Screen Designer, TrendManager Pro
Screen Designer, TrendServer Pro
AMS2750-D Report Generation Tool Software
Screen Protector 5-Pack for Minitrend GR
Screen Protector 5-Pack for Multitrend GR
Restrictions
a Requires a minimum of six inputs in Slot A.
c Not available with Case/Mount V _ _ _ _ _.
f Requires minimum of four inputs in Slot A.
gRequires inputs in all preceding slots.
CatalogAvail-
Numberability Price
Model MI MU
2 _
• •
0.00
4 _
• • 221.00
5_
• • 221.00
_ 1
• •
0.00
_ 2
• •
0.00
3
• •
63.00
4
• • 184.00
5
• • 378.00
0 _ _
• •
0.00
S _ _
• • 210.00
_ 10
• • 331.00
_ 20
• • 601.00
_ 30
• • 756.00
_ 40
• • 840.00
_ 50
• • 1103.00
_ 60
• • 1239.00
_ 70
• • 1313.00
_ 90
• • 1444.00
0 _ _ _ _ _ • •
0.00
R _ _ _ _ _ • •
79.00
_ 0 _ _ _ _ • •
0.00
_ U _ _ _ _ • •
21.00
_ _ 0 _ _ _ • •
0.00
_ _ S _ _ _ • •
37.00
_ _ _ 0 _ _ • •
0.00
_ _ _ 1 _ _ • •
53.00
_ _ _ 2 _ _ c •
53.00
_ _ _ 3 _ _ c • 105.00
_ _ _ 5 _ _ c • 105.00
_ _ _ 7 _ _ c • 131.00
_ _ _ _ 0 _ • •
0.00
_ _ _ _ B _ • •
33.00
_ _ _ _ C _ • • 300.00
_ _ _ _ E _ • • 333.00
_ _ _ _ _ 0 • •
0.00
_ _ _ _ _ P • • 331.00
_ _ _ _ _ S • • 546.00
_ _ _ _ _ T • • 814.00
_ _ _ _ _ E • • 546.00
_ _ _ _ _ F • • 761.00
_ _ _ _ _ G • • 919.00
50037651-501 328.00
50017290-501
71.30
50017290-502 141.45
Call Lesman for pricing
and availability on signal
connectors for use with
individual analog inputs.
Honeywell X-Series paperless recorders make it
easier for you to comply with AMS2750D standards.
If your process is subject to NADCAP audits, these
recorders can collect the data and produce survey
reports to show that your temperature instrumentation is in compliance.
Two modes in the recorder address the
AMD2750D specification. Process mode can be
used to track calibration due dates and thermocouple usage conditions for the process equipment
and alert the data.
Typically, this would be used on a recorder
mounted on the process furnace. AMS2750 temperature uniformity mode (available only on the Multitrend) lets you use the
recorder as a field test instrument to do a temperature uniformity
survey, and create a data file used to generate required reports.
AMS2750D Process Mode
Process mode lets you track
thermocouple usages based on
thermocouple type, the number
of times they are used, and the
temperatures they see, to determine if they are still within the
AMS2750D specified allowable
uses. It will also track due dates
for System Accuracy Tests (SAT),
when the next temperature
uniformity survey is due, and when the recorder is due for calibration.
Each item provides a five-day warning, through color-coded screen
icons, before indicating an out-of-tolerance condition. AMS2750 Process
Mode requires five credits to function, and is available on all three XSeries recorders.
AMS2750 process is used when the recorder is attached to the process in the role of a recording device. All SX, QX and QXe recorders can
operate in the Process mode and can be used as a process recorder to
monitor process timers for calibration due dates and thermocouple
usage set by the user.
Process mode adds some new status screens and timers to the
recorder to help with AMS2750D compliance of the process, giving a
countdown to SAT and TUS intervals as well as control thermocouple
and instrument calibration.
AMS2750 process mode is available on all X-Series recorders, and
requires five credits in the X-Series firmware credit system and the rear
cover (Option R in the model selection guide or a retrofit rear cover.)
Countdown Timers
AMS2750 tools include individual countdown timers for System Accuracy Test (SAT), temperature uniformity survey (TUS), Control TC and
Instrument calibration.
TUS and SAT countdown timers
track the next date for survey/test. A
timer reset screen shows a suggested
date for SAT or TUS, depending on
Furnace Class, material, and instrumentation types.
A separate timer provides a
countdown to the next instrument
or control thermocouple calibration.
See the X-Series user manual at Lesman.com
for more on AMS2750D features.
Thermocouple Usage Tracking
Thermocouple Usage Tracking is available
with both TUS and Process options. It tracks
thermocouple use within a recorder that’s
being used as a process instrument, and displays the results as a status screen. This give
an indication to when thermocouples need
replacing, dependent on load cycles and other
factors specified in AMS2750D.
AMS2750D Temperature Uniformity
Survey Mode
A Temperature Uniformity Survey (TUS) is
a key requirement for a NADCAP audit. It determines how well a furnace performs relative
to its design — in particular, the uniformity of
the temperature within the volume of the working area of the furnace
compared to the programmed setpoint.
X-Series TUS mode allows a recorder to be set up as a testing device
rather than an in-process recorder, to monitor and record the temperature uniformity of thermal processing equipment per AMS2750D. Plus,
it monitors thermocouple usage and reports their status.
Another key factor in the heat treatment process is monitoring the
number of times thermocouples have been used and the temperatures
to which they’ve been exposed, to ensure they are accurate and reliable.
Unlike in Process mode, TUS mode lets you set up a survey with up
to six survey setpoints, and can support up to 40 inputs. Survey data
points are recorded every two minutes into a separated data file that
is used by the TUS report generator to create a temperature survey
report. Currently, the TUS capability works only on single zone thermal
processing equipment.
What do I need to get AMD TUS reports on my PC?
Here’s what you need to run AMS themocouple uniformity surveys on
a GR series recorder and generate TUS reports from a PC:
• 10 firmware credits for AMS2750 TUS
• Sufficient credits for additional pens *
• AMS2750D PC Report Generation Tool P/N 50037651-501
• R (Rear cover) option on recorder’s part number (or retrofit rear
cover with P/N 50005458-501)
• TrendManager or TrendServer Pro software*
• Three firmware credits (optional) applied to Report for abbreviated
TUS Report on recorder (not PC version).
* Data for a TUS report is logged to the TUS export memory,not the recorder’s
log memory. To export TUS data to a TrendManager or TrendServer Pro
database, you’ll need additional pens for each temperature pen.
AMS2750D Report Generation Software
The AMS2750D Report Generation Tool
is PC software that produces reports from
your recorder’s data results.
Report tool uses a special data file generated by the recorder, plus user-entered
data related to the survey, furnace instrumentation and calibration information,
to generate the survey report in Adobe
PDF format.
This document can then be printed and
signed by the appropriate person.
50037651-501
$328.00
Solids Flow and Motion
AMS2750D Standards Compliance with X-Series Recorders
Controllers
and Programmers
255
Digital Indicators
PAPERLESS
RECORDERS
Recorders and
Data Acquisition
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
Combustion Safety
and Efficiency
www.lesman.com
[email protected]
Process Valves
Lesman Instrument Company
V 01.2015
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
RECORDER
SOFTWARE
V 01.2015
Solids Flow and Motion
256
Lesman Instrument Company
Illinois, Indiana, Missouri, and Iowa
Phone: 800-953-7626 • 630-595-8400
Fax: 630-595-2386
Wisconsin, and Upper Peninsula Michigan
Phone: 800-837-1700 • 262-923-1790
Fax: 262-923-1797
www.lesman.com
[email protected]
Honeywell Trendview Family Video Recorder Software
Controllers and
Programmers
Features
Import data from CF card or USB flash drive
Graph data and print charts
Export data using CSV format files*
Read archived data on PC’s integral source database
Full configuration of all V5 recorders on PC (Required for Events options)
Ethernet networking: E-mail alarm messages, import data and setups via FTP
Real-time data acquisition to PC
OPC Server
Remote access to database (password-protected)
Audit trail manager with full user traceability
Password administration, control, permissions
Price per User License (See Software Compatibility below.)
TrendViewerTrendManager ProTrendServer Pro
✓
✓
Included w/ unit
✓
✓
✓
✓
✓
$328.00
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
$546.00
* Export to flash memory in CSV format is standard GR feature.
Digital Indicators
Features Available Only in TrendServer Pro
Modbus RS-485, Modbus TCP • FTP Protocols • Distribute all recorder data over LAN plant-wide • Local and remote server and
database access via Server/Client DCOM (optional) • Comms server manages recorder communication status • Send setup to record
• Audit trail manager • Realtime data retrieval used for graphing and logging • Replay of historical and realtime data using a split
screen format • Web browse a recorder • OPC DA 2.0 compliant
Recorders and
Data Acquisition
• Import data from any TrendView or X-Series recorder
• Communicate real time via Ethernet
• Archive data on a single integral database; schedule
downloads of recorder data
• Graph, plot, and export data across any recorder, pen
• Remotely configure recorders
Combustion Safety
and Efficiency
Process Valves
TrendViewer: View, graph, print data from a flash memory stick.
TrendManager Pro (TMP): Using a database avoids issues of
imported data being a collection of oddly-named files. Instead,
imported data is saved in an archival database for easy retrieval.
A search tool identifies archived data by batch field ID or date
and time, fetches and displays it in either graphical or tabular (numerical) format. Chart graph tools zoom in or out; a cursor displays
digital values. There are navigation buttons for major functions like
import, print, search and custom labeling.
Data from different recorders can reside on the same chart.
Chart templates make it easy to retrieve recurring data, like last
hour’s, last shift’s, yesterday’s or last week’s data. Exports data in
.csv spreadsheet format.
TrendServer Pro (TSP): TSP does everything TMP does but is fully
Ethernet LAN network aware. Data is transferred via a manual FTP
or a scheduled FTP (block data transfer). Process data is archived
in the database automatically. Real-Time function streams data
from one or more recorders for a current window into the process.
OPC-DA server is optional. Configuration setups can be transferred
via the network.
System requirements: Windows XP (32 bit) or Windows 7
Software Compatibility
Honeywell Trendview software for the GR series is backwardscompatible to older X-series recorders. The update from older
TrendServer Pro and TrendManager Pro is free to licensed users,
and can be downloaded from Honeywell’s website.
View recorder
data anywherek
on your networ
using a web
browser!
Model Selection Guide
Description
TrendManager Pro Software
TrendServer Pro Software- Single User Version
TrendServer Pro Software- 5 User Pack
TrendServer Pro with OPC Server Single User
TrendServer Pro with OPC Server- 5 User Pack
Catalog No
50016133-501
50016134-501
50016135-501
50016136-501
50016137-501
Price
$328.00
546.00
1420.00
819.00
1638.00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement