Thank you for purchasing an INFINITI automo- bile. This

Thank you for purchasing an INFINITI automo- bile. This
Thank you for purchasing an INFINITI automobile. This user’s manual is for the navigation
system only. This manual contains operating
instructions for the INFINITI Navigation System
offered in the INFINITI G35.
Please read this manual carefully to ensure safe
operation of the navigation system.
O Please read your vehicle’s owner’s manual
first.
O Do not remove this manual from the vehicle
when selling this vehicle. The next user of
this navigation system may need the
manual.
O Because of possible specification changes,
parts of this manual may not apply to your
vehicle.
O All information, specifications and illustrations in this manual are those in effect at the
time of printing. INFINITI reserves the right
to change specifications or design at any
time without notice.
Z 01.12.20/V35 (NAVI) X
Z 01.12.20/V35 (NAVI) X
CONTENTS
INTRODUCTION .............................................................................. 1-1
HOW DOES THE INFINITI NAVIGATION SYSTEM WORK? ............................ 2-1
WHAT FEATURES ARE AVAILABLE ON THE INFINITI NAVIGATION SYSTEM?.... 3-1
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?.......................... 4-1
HOW DO I PROGRAM A DESTINATION?................................................. 5-1
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE? ......................... 6-1
HOW DO I USE THE ADDRESS BOOK FEATURE? ...................................... 7-1
HOW DO I USE THE AVOID AREA FEATURE? .......................................... 8-1
HOW DO I USE THE AUTOMATIC REROUTING FEATURE? ........................... 9-1
HOW DO I USE THE VOICE GUIDANCE FEATURE? ................................... 10-1
HOW DO I ADJUST THE DISPLAY? ..................................................... 11-1
HOW DO I USE THE VEHICLE INFORMATION? ....................................... 12-1
INFORMATION ON MAP DATA DISCS .................................................. 13-1
TROUBLESHOOTING GUIDE .............................................................. 14-1
INDEX ........................................................................................ 15-1
Z 01.12.14/V35 (NAVI) X
Z 01.12.14/V35 (NAVI) X
1
How to use this manual ..............................
For safe operation .................................
Reference symbols.................................
Safety note...................................................
INTRODUCTION
1-2
1-2
1-2
1-2
Z 01.12.14/V35 (NAVI) X
INTRODUCTION
HOW TO USE THIS
MANUAL
This manual uses special words and icons, organized by function. Please refer to the following items and familiarize yourself with them.
The display and control panel are combined for
G35 model navigation system.
FOR SAFE OPERATION
WARNING
This is used to indicate the presence
of a hazard that could cause death or
serious personal injury. To avoid or
reduce the risk, the procedures must
be followed precisely.
DEST button
CAUTION
This is used to indicate the presence
of a hazard that could cause minor or
moderate personal injury or damage
to your vehicle. To avoid or reduce
the risk, the procedures must be followed carefully.
NOTE:
This indicates an item to help you understand the maximum performance of your
vehicle. If ignored, it may lead to a malfunction or poor performance.
REFERENCE SYMBOLS
INFO:
This indicates information necessary for efficient use of your vehicle or accessories.
This is a button on the control panel.
View key
This is a select key on the screen. By selecting this key you can proceed to the
next function.
SAFETY NOTE
This system is primarily designed to help you
reach your destination, and also performs other
functions as outlined in this manual. However,
you, the driver, must use the system safely and
properly. Information concerning road conditions, traffic signs and the availability of services may not always be up-to-date. The system is not a substitute for safe, proper,
and legal driving.
Before using the navigation system, please
read the following safety information. Always
use the system as outlined in this manual.
1-2
Z 02.7.24/V35 (NAVI) X
INTRODUCTION
WARNING
O When the driver operates the navigation system or uses the joystick
(screen function), first park the vehicle in a safe place and set the
parking brake. Using the system
while driving can distract the
driver and may result in a serious
accident. Destinations cannot be
set while the vehicle is in motion.
O Do not rely on voice guidance
alone. Always be sure that all driving maneuvers may be made legally and safely to avoid an accident.
O Do not disassemble or modify this
system. If you do, it may result in
accidents, fire, or electrical
shock.
O Do not use this system if you notice any malfunction such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire, or electrical
shock.
O If you notice any foreign object in
the system hardware or spilled
liquid, or notice smoke or a smell
coming from it, stop using the system immediately and contact your
nearest INFINITI dealer. Ignoring
such conditions may lead to accidents, fire, or electrical shock.
NOTE:
Some states/provinces may have laws
limiting the use of video screens while
driving. Use this system only where legal.
1-3
Z 01.12.14/V35 (NAVI) X
Z 01.12.14/V35 (NAVI) X
2
HOW DOES THE INFINITI NAVIGATION SYSTEM WORK?
What is a navigation system?..................... 2-2
About the navigation system ................ 2-2
What is GPS (Global Positioning
System)? .................................................... 2-2
Accuracy of positioning.......................... 2-2
Positioning adjustment........................... 2-3
Receiving signals from GPS satellites ... 2-3
Display of GPS information ................... 2-3
Detailed map coverage areas (MCA) for the
navigation system ....................................... 2-4
Z 01.12.14/V35 (NAVI) X
HOW DOES THE INFINITI NAVIGATION SYSTEM WORK?
WHAT IS A NAVIGATION
SYSTEM?
ABOUT THE NAVIGATION SYSTEM
This navigation system combines the data obtained from the vehicle (by gyro sensor) and
from GPS (Global Positioning System) satellites to calculate the current location of the vehicle. This position is then displayed on the
screen, allowing route guidance to a destination.
WHAT IS GPS (GLOBAL POSITIONING SYSTEM)?
GPS is a system developed and operated by the
U.S. Government, covering the entire planet.
This navigation system receives three or more
different radio signals from NAVSTAR (GPS
satellites), orbiting the earth 13,049 miles
(21,000 km) above ground. The data from different sets of signals will be trigonometrically
calculated to obtain the position of the vehicle.
INFO:
ACCURACY OF POSITIONING
The tracking center in the U.S. controls signals
transmitted from GPS satellites. This control
sometimes results in reduced accuracy or no
signal received at all.
INV0901
The color of the GPS Indicator
on the upper left corner of the screen indicates positioning as follows:
O Green: When positioning is possible and
accurate
O Yellow: When positioning is possible but
not accurate
O Gray: When positioning is not possible
2-2
Z 02.7.18/V35 (NAVI) X
HOW DOES THE INFINITI NAVIGATION SYSTEM WORK?
INFO:
For approximately 3 or 4 minutes after system
remains gray,
startup, the GPS indicator
even if accurate positioning is possible.
Vehicles in these areas may not receive GPS
signals (Indicator color: gray).
INFO:
When the system judges that the vehicle position information is not accurate based on vehicle speed and gyro sensor data calculations,
the system will adjust the vehicle position information using GPS signals.
The antenna for GPS is located in the instrument panel. Do not place any object, especially mobile phones or transceivers,
on the instrument panel. Because the
strength of the GPS signals is approximately
one billionth of that of TV waves, phones and
transceivers will decrease the strength or may
totally disrupt the signals.
RECEIVING SIGNALS FROM
GPS SATELLITES
DISPLAY OF GPS INFORMATION
Sometimes, satellite reception is weak. The following are places where signals tend to be
weak:
This system displays GPS information.
POSITIONING ADJUSTMENT
O Inside tunnels and parking lots in buildings
NOTE:
Directional guidance provided by the
navigation system does not take carpool
lane driving into consideration, especially when carpool lanes are separated
from other road lanes.
Please refer to “GPS information display” on
page 11-13.
O Areas with numerous tall buildings
O Under multi-layered highways
O In a dense forest
2-3
Z 01.12.14/V35 (NAVI) X
HOW DOES THE INFINITI NAVIGATION SYSTEM WORK?
DETAILED MAP COVERAGE
AREAS (MCA) FOR THE
NAVIGATION SYSTEM
data and other areas showing “Main roads
only”.
This system is designed to help you reach your
destination, and also performs other functions
as outlined in this manual. However, you, the
driver, must use the system safely and properly. Information concerning road conditions,
traffic signs and the availability of services may
not always be up-to-date. The system is not a
substitute for safe, proper, and legal driving.
Detailed map data is not available in
many areas and is generally limited to
select major metropolitan areas.
Map data covers select metropolitan areas in
the United States.
Map data consists of map DVD-ROM. For information about map DVD-ROMs, contact an
INFINITI dealer or call the Infiniti Navigation
System help desk at 800-662-6200 for U.S. or
800-361-4792 for CANADA.
Map data includes 2 types of areas: “Detailed
coverage areas” providing all detailed road
NOTE:
For information on which metropolitan areas
are in detailed coverage areas, please refer to
the Infiniti Navigation System Software Booklet
(included). When you purchase an updated
map DVD-ROM, a new software booklet will be
provided.
O When you are driving on a gray road after
the vehicle has deviated from the suggested
route during route guidance, automatic rerouting may not start immediately.
O Route guidance (enlarged view and voice
guidance) may not be done at the intersection where the road your vehicle is driving
on and a gray road intersect.
O POI information and street names near gray
roads are not contained in the map data.
WHEN A GRAY ROAD IS DISPLAYED ON THE MAP
O Route calculation may not be possible when
a destination or the current vehicle location
is near a gray road.
O When setting a destination, the road near
the cross cursor blinks. For gray roads,
however, the road may not blink.
2-4
Z 02.7.18/V35 (NAVI) X
3
WHAT FEATURES ARE AVAILABLE ON THE INFINITI
NAVIGATION SYSTEM?
Route guidance............................................
Point of interest (POI) directory ................
Address book...............................................
Avoid area....................................................
Automatic re-route ......................................
Detour ..........................................................
BirdviewTM ...................................................
Voice guidance ............................................
Short menus ................................................
3-2
3-2
3-2
3-2
3-3
3-3
3-3
3-3
3-4
Z 01.12.14/V35 (NAVI) X
WHAT FEATURES ARE AVAILABLE ON THE INFINITI NAVIGATION SYSTEM?
ROUTE GUIDANCE
a destination, please refer to section 5.
The main feature of the Infiniti Navigation System is Visual and Audio Route Guidance in selected detailed map coverage areas. Utilizing a
network of GPS (Global Positioning System)
satellites, the Infiniti Navigation System tracks
your location on the map and directs you where
you want to go.
POINT OF INTEREST (POI)
DIRECTORY
Once you program a destination covered by a
detailed map, the Infiniti Navigation System
will determine a route from your current location to your destination. The moving map display and turn-by-turn voice commands help
the driver determine upcoming turns.
This feature can be especially helpful in finding
unfamiliar locations or businesses. The system
may be unable to set a destination and/or calculate distance when a destination is outside
a detailed map coverage area. Additionally, audio route guidance may not be available if the
destination is outside a detailed map coverage
area. For more information on how to program
The Infiniti Navigation System offers an extensive Point of Interest directory in detailed map
coverage areas for your convenience. This directory includes a wide variety of destinations
ranging from gas stations, ATMs, and restaurants to casinos, ski resorts, shopping centers
and businesses. By accessing the Point of Interest directory, you can search for addresses
and phone numbers for a destination, and with
a press of a button, the Infiniti Navigation System will calculate a route to the destination.
The Point of Interest directory offers many
uses. For example, the directory can be sorted
by the various types of restaurants near your
current location. If you need an ATM or gas station, the Infiniti Navigation System can point
you to the closest one or the closest one of your
favorite brand.
For more information on how to use the Point
of Interest directory, please refer to section 6.
ADDRESS BOOK
Using the Address Book feature, you will have
the ability to store up to 50 locations into a personal directory in detailed map coverage areas.
This is especially useful for frequently visited locations, such as your clients, relatives, or
friends. The Address Book feature will provide
you with easy access to these frequently visited
locations when setting them as your destination.
For more information on how to use your address book, please refer to section 7.
AVOID AREA
By using the Avoid Area feature, you can identify areas or freeways that you would like the
Infiniti Navigation System to avoid when plotting routes. For example, if you know of a freeway or area that is always congested with traffic, you can program the Infiniti Navigation
3-2
Z 02.7.18/V35 (NAVI) X
WHAT FEATURES ARE AVAILABLE ON THE INFINITI NAVIGATION SYSTEM?
System to plot routes that go around that particular freeway or area.
For more information on the Avoid Area feature, please refer to section 8.
roads after a specified number of miles.
For more information on the Detour feature,
please refer to section 9.
For more information on the BIRDVIEWTM feature, please refer to section 11.
VOICE GUIDANCE
TM
BIRDVIEW
AUTOMATIC RE-ROUTE
If you miss a turn while using the Route Guidance feature, the Infiniti Navigation System will
automatically re-calculate a new route to your
destination.
For more information on the Automatic ReRoute feature, please refer to section 9.
DETOUR
If you hear about a traffic accident on the radio
that is 4 miles (6 km) ahead of you and traffic
is backing up fast, you can use the Detour function to calculate an alternative route that will
help you avoid the gridlock caused by the traffic accident. The Infiniti Navigation System has
the ability to find an alternative route using secondary roads that will return you to primary
INV0903
INV0902
The Infiniti Navigation System gives you a
choice of two map viewing styles, a normal
2-dimensional PLANVIEW map and the
3-dimensional BIRDVIEWTM map. The 3-D
BIRDVIEWTM map depicts a geographic area as
seen from an elevated perspective, so you will
get a better feel for the route ahead.
Route guidance is executed using voice and
screen instruction. When the vehicle approaches an intersection where you need to
turn, the voice guidance tells you the direction
to take.
The system also has the following useful features:
O Enlarged display of intersections.
3-3
Z 01.12.14/V35 (NAVI) X
WHAT FEATURES ARE AVAILABLE ON THE INFINITI NAVIGATION SYSTEM?
O Automatic re-routing when a vehicle is off
the course (when map is displayed).
tion systems menus (Expert Mode) are displayed.
For more information on the Voice Guidance
feature, please refer to section 10.
INFO:
SHORT MENUS
O [Easy Mode] is the default setting on the
initial screen at the delivery of your new vehicle.
O Term [Expert Mode] is used in this manual
when the Short Menus key indicator is
turned off. When the green indicator is
highlighted, the system is set to [Easy
Mode].
INV0904
To make the Infiniti Navigation System easier
to use, there is a short menu function in which
various operation items are reduced in number. When the indicator is illuminated, the
short menus (Easy Mode) are displayed. When
the indicator is turned off, the default naviga-
O When the SETTING , DEST or
ROUTE button is pressed in the [Easy
Mode] screen, the Help key is displayed.
For more information on the Short Menu
feature, please refer to section 4.
3-4
Z 01.12.14/V35 (NAVI) X
4
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
Opening/closing the liquid crystal (LC)
display ........................................................ 4-2
How to open the LC display .................. 4-2
How to close the LC display .................. 4-2
Control panel button functions .................. 4-4
Names of the components .................... 4-5
How to use the joystick and the push enter
button ..................................................... 4-6
How to use the PREVIOUS button ....... 4-6
How to use the CANCEL button .......... 4-6
How to use the SETTING button.......... 4-8
How to use the DEST button ............ 4-11
How to use the ROUTE button .......... 4-13
How to eject/insert the disc ..................... 4-15
Setting up the start-up screen .................. 4-16
Confirmation of destination or
waypoint............................................... 4-16
Clearing the memory ................................. 4-19
Setting the average speed ........................ 4-20
About route guidance ................................ 4-21
Notes on route guidance...................... 4-21
About the display error ........................ 4-23
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
OPENING/CLOSING THE
LIQUID CRYSTAL (LC) DISPLAY
When you use this system, make sure the engine is running.
NOTE:
If you use the system with the engine not
running (ignition ON or ACC) for a long
time, it will use up all the electricity in
the battery, making it impossible to start
the engine.
INFO:
or spill liquid on it, it may result in
system malfunction.
O When the liquid crystal display is
not used (such as during parking),
store it.
Press the button at the upper part of the liquid
crystal display.
The liquid crystal display will come out of the
upper part of the instrument panel.
O If it is difficult to watch the screen due to
sunlight, tilt the display forward or backward to adjust to the desired angle.
O To protect the liquid crystal display, as
much as possible, store it when it is not
used.
HOW TO CLOSE THE LC DISPLAY
Push the center of the upper part of the display.
The display will be stored in the upper part of
the instrument panel.
HOW TO OPEN THE LC DISPLAY
CAUTION
O Do not place any objects on the instrument panel. If you drop any
objects onto the instrument panel
INI0074
4-2
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
INI0075
INFO:
O To protect the liquid crystal display, as
much as possible, store it when it is not
used.
O When the liquid crystal display is
tilted, return it to the original position
and then store it. If it is pushed under
tilted conditions, it may be difficult to
store.
O If the side of the display is pushed, it may
be difficult to store.
4-3
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
CONTROL PANEL BUTTON
FUNCTIONS
INI0072
4-4
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
NAMES OF THE COMPONENTS
7. JOYSTICK and PUSH ENTER button; refer
to page 4-6.
Scrolls the map, selects and sets each setting item.
8. PREVIOUS button; refer to page 4-6.
Returns to the previous screen during setup.
Finishes the set-up after it is completed.
INI0073
1. VOICE button; refer to page 10-4.
Provides upcoming voice command from
the current location.
4. INFO button: refer to section 12.
Displays the [VEHICLE INFORMATION] or
[WARNING] screen.
2. ROUTE button; refer to page 4-13.
Displays the setting menu screen at the time
of route calculation.
5. MAP button; refer to page 5-32.
Toggles between the intersection and the
map during route guidance. Returns to the
map screen from the settings screen.
3. SETTING button; refer to page 4-8.
Performs various adjustments and settings
to help you use the navigation system more
effectively.
6. DEST button; refer to page 4-11.
Displays the “Set a Destination” menu.
9. ZOOM IN / ZOOM OUT button; refer
to page 11-2.
Alters the scale of the map display.
10. CANCEL button; refer to page 4-6.
Cancels operations or the route guidance.
11. D/N (Day/Night) button; refer to page
11-19.
Changes display brightness.
12.
button; refer to page 4-15.
Ejects the DVD-ROM.
4-5
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
HOW TO USE THE JOYSTICK
AND THE PUSH ENTER BUTTON
The navigation system is operated basically by
selecting keys on the screen with the joystick
and pressing the PUSH ENTER button. Be sure
to understand the operation of the joystick before using the navigation system.
Selecting the keys on the screen
Use the joystick to select keys on the screen.
The joystick can be tilted in eight directions.
The selected key will be used highlighted in
yellow.
the function of the selected key (highlighted in
yellow).
HOW TO USE THE PREVIOUS
BUTTON
This button has two functions.
T o return to the previous screen:
When this button is pressed during setup,
setup will be canceled, and the screen will return to the previous screen.
T o finish the set-up:
INFO:
When this button is pressed after set-up is
completed, the settings will be renewed as directed, and the screen will return to the map.
Use the joystick to scroll the map.
INFO:
Carrying out the function of the
selected key
When the PREVIOUS button must be
pressed, (for example, after the set-up is finished) instructions are given in the operation
procedure of each section in this manual. If the
PREVIOUS button is pressed when not fin-
Press the PUSH ENTER button.
The display shows the screen used to carry out
ished with the set-up, the setting will be canceled, and the screen will return to the previous
screen.
HOW TO USE THE CANCEL
BUTTON
This button has two functions:
O Operation is canceled when pushed during
operation.
O The [CONFIRMATION] screen is displayed
during route guidance in the present location map.
INV0905
4-6
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
When the CANCEL button is pressed, the
[CONFIRMATION] screen is displayed with the
following three keys.
O All Destinations
2. When the Yes key is selected, the route
guidance is turned off.
INFO:
O When the No key is selected, the map will
be displayed. When the PREVIOUS button is pressed, the previous screen will be
displayed.
O Waypoint 1
O Do not Cancel
When the All Destinations key is
selected
The route guidance is turned off temporarily.
O To restart the route guidance, press the
VOICE button.
When the Waypoint 1 key is selected
INFO:
This key can be selected only when a waypoint
is set.
Route guidance to the next waypoint is deleted.
INV0907
1. Select the Waypoint 1 key.
2. When the Yes key is selected, the
waypoint is deleted and route calculation
will start.
INFO:
When the No key is selected, the map will
be displayed. When the PREVIOUS button is
pressed, the previous screen will be displayed.
INV0906
1. Select the All Destinations key.
4-7
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
When the Do not Cancel key is
selected
The [Confirmation] screen will return to the
map screen.
HOW TO USE THE SETTING
BUTTON
Language/Unit key:
WARNING
For safety, some of the functions on
the menu will be disabled while the
vehicle is moving. To use the temporarily disabled functions, park the vehicle in a safe place, shift to P or N,
and set the parking brake.
To use the navigation system more effectively,
various adjustments and settings can be performed.
Clock key:
INV0908
When the SETTING button is pressed, the
[SETTINGS] screen is displayed.
To adjust the time, select the Clock key.
Please refer to page 11-21.
Display key:
The key also adjusts the display mode.
Please refer to page 11-17.
Changes language and unit.
Please refer to page 4-9.
Navigation key:
Changes various settings of the navigation
system.
Please refer to page 4-9.
Short Menus key:
This key changes between [Expert Mode] and
[Easy Mode].
Please refer to page 3-4.
Guidance Volume key:
Adjusts or turns off volume of the voice guidance.
Please refer to “Adjusting the guide volume” on
page 10-2.
Help key:
Only easy mode (short menus).
4-8
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
You can see the explanation of navigational
functions.
When Language/Unit key is selected
1. The following display will appear when selecting the Language/Unit key and pressing PUSH ENTER button.
Language: English or French
INV1116
Unit: US — Mile, MPG
Metric — km, /100 km
2. You can select the language and unit using
the joystick and PUSH ENTER button.
When the Navigation key is selected
The following display will appear when selecting the Navigation key and pressing the
PUSH ENTER button.
INV1115
INV0910
View key:
This will let you choose between BirdviewTM
display and Planview display.
Please refer to “Switching between BirdviewTM
and Planview displays” on page 11-3.
Heading key:
You can set the map either to show the vehicle’s current forward direction as up, or to show
North as up.
Please refer to “Changing the display direction” on page 11-7.
4-9
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
Nearby Display Icons key:
Displays five types of points of interest around
the current location.
Please refer to “Setting with the nearby key” on
page 6-11.
Save Current Location key:
Stores the current vehicle location in the address book.
Please refer to “Storing current vehicle position” on page 7-3.
Adjust Current Location key:
Corrects the location and direction of the vehicle icon.
Please refer to “Updating the current vehicle location and the direction” on page 11-14.
Auto Re-route On/Off key:
A new route to the desired destination will automatically be calculated again from the loca-
tion when the vehicle is off the suggested route
during route guidance.
Please refer to “Automatic re-routing” on page
9-2.
Avoid Area Settings key:
Edit Address Book key:
Changes the names and positions of the registered locations.
Please refer to “Setting up and editing the address book” on page 7-2.
GPS Information key:
Defines areas to avoid when calculating a
route.
GPS information will be displayed.
Please refer to “Setting avoid areas” on page
8-2.
Please refer to “GPS information display” on
page 11-13.
Button Tone/Beep Response key:
Quick Stop Customer Settings key:
This key is used to turn on/off the automatic
beep sound.
Sets the user-defined [Quick Stop] POI (Point
Of Interest).
Please refer to “Setting automatic beep sound”
on page 11-16.
Please refer to “Quick stop customer settings”
on page 5-37.
Clear Memory key:
Clears all the stored memory (Address Book,
Avoid Area, Previous Dest.).
Please refer to “Clearing the memory” on page
4-19.
Set Average Speed for Estimated Journey Time
key:
Please refer to “Setting the average speed” on
page 4-20.
4-10
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
Tracking On/Off key:
Heading key:
You can choose whether to display the path
from the start to the current position.
Please refer to “Displaying the track” on page
11-12.
WARNING
Same as in Expert Mode.
HOW TO USE THE DEST BUTTON
Sets destinations (final destination and
waypoints) to search for a route.
For safety, some of the functions on
the menu will be disabled while the
vehicle is moving. To use the temporarily disabled functions, park the vehicle in a safe place and shift to P or
N, and set the parking brake.
O
Address Book key:
Use this category item if you want to go to
places stored in the address book.
INV0911
Easy Mode — when Short Menus
key is selected
View key:
Same as in Expert Mode.
INV0912
This will activate various navigational functions.
Please
refer
to
“Setting
Address Book key” on page 5-3.
O
with
Previous Dest. key:
You can choose destinations from the last 10
destinations set.
For details, please refer to “Setting with
Previous Dest. key” on page 5-5.
4-11
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
O
Address/Street key:
screen of the area around the input city.
Use this category item if you know the city
name, street name and house number of the
destination (waypoints).
Please refer to “Setting with City key” on
page 5-18.
Please
refer
to
“Setting
Address/Street key” on page 5-6.
Use this category item when the destination
phone number is known.
O
with
Intersection key:
Sets a destination using the intersection of 2
streets.
O
Phone Number key:
Please refer to “Setting with Phone Number
key” on page 5-22.
O
Map key:
Please refer to “Setting with Intersection
key” on page 5-12.
Use this category item if you want to choose
the place directly on the map display.
O
Please refer to “Setting with Map key” on
page 5-24.
Point of Interest (POI) key:
Use this category item if you want to go to a
restaurant, hotel, gas station or other facility.
Please
refer
to
“Setting
with
Point of Interest (POI) key” on page 6-2.
O
City key:
Sets the destination (waypoint) on the map
O
Country key:
This key is used to retrieve a location in another
country when it is set as the destination
(waypoint).
Please refer to “Setting with Country key” on
page 5-25.
INV0913
Easy Mode — when the
Short Menus key is selected
Help key:
You can see the explanation of the navigational
functions.
Home key:
When you set your home in the address book,
a route home will be calculated by selecting
this key.
If the home is not set beforehand, the setting
4-12
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
Route Info key:
mode will appear to input the home address.
Please refer to “Setting with Home key” on
page 5-26.
Displays the route to the destination. There are
three types of display methods.
Address/Street key:
Complete Route key:
Same as in Expert Mode.
Displays the entire routes from the current
location to the destination.
Point of Interest (POI) key:
Same as in Expert Mode.
Country key:
Same as in Expert Mode.
HOW TO USE THE ROUTE BUTTON
When the ROUTE button is pressed while the
current location is displayed on the screen, the
display shows the following keys.
INFO:
When no operations are executed after a few
seconds, the keys will disappear automatically.
INV0914
Quick Stop key:
Selects the destination (waypoints) from a list
of 5 commonly used POI (Points of Interest).
Please refer to “Quick stop” on page 5-36.
Where am I? key:
Displays the street where the vehicle is currently located, the previous street, and the upcoming street.
Please refer to “Where am I” on page 5-39.
Please refer to “Displaying the complete
route to the destination” on page 11-9.
Turn List key:
Displays a list of the guidance points for the
entire routes to the destination on a simple
map.
Please refer to “Displaying turn list” on
page 11-10.
Route Simulation key:
Performs a simulation drive on the map
screen by moving a vehicle icon on all the
routes from the current location to the destination.
4-13
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
Please refer to “Requesting the simulation
drive to the destination” on page 11-11.
Edit Route key:
Resets the set destination (waypoint).
Please refer to “Making the system guide the
route with detailed options” on page 5-27.
Quick Stop key:
Same as in Expert Mode.
Where am I? key:
Same as in Expert Mode.
Keys that appear when the map
is scrolled with the joystick
You can scroll the map display and get information about the area near your vehicle and the
destination using the joystick.
INFO:
O This function can be used when the original
map disc is inserted.
INV0915
Easy Mode — when the
Short Menus key is selected
Help key:
You can see the explanation of the navigation
functions.
O You can operate this with the map display
on.
O This function cannot be used when the system is calculating the route or drawing the
screen.
INV0916
Store Place key:
You can store the location with the cross
pointer.
Please refer to “Storing current vehicle position” on page 7-3.
Destination # key:
You can set the position as a destination, using
the cross pointer. The maximum number of
destinations is six, and the last one stored will
be the final destination. (# will appear on the
map to denote the selected locations from 1 to
4-14
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
6.) Please refer to “Making the system guide
the route with detailed options” on page 5-27.
HOW TO EJECT/INSERT THE
DISC
INFO:
The navigation system is installed in the upper
glove box.
This system is provided with the map DVDROM.
INI0076
INI0078
INI0077
INI0079
NOTE:
Please take great care in handling the
disc.
1. Open the cover located on the upper part of
the sub-glove box.
2. To insert a disc:
It will be drawn in automatically. You do not
have to push it in all the way.
To eject the disc:
button.
Press the
4-15
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
3. Close the cover.
SETTING UP THE START -UP
SCREEN
CAUTION
When the engine is turned off during route calculation and then turned on, the [CONFIRMATION OF DEST./WAYPOINT] screen will be
displayed after the [SYSTEM START-UP]
screen.
O The included map DVD-ROM is designed specifically for your navigation system. Do not use it in another system as it could cause a
malfunction.
O Do not allow the system to get wet.
Excessive moisture such as
spilled liquids may cause the system to malfunction.
CONFIRMATION OF DESTINATION OR WAYPOINT
INV0917
When you turn the ignition key to ACC, the
above warning is displayed on the screen. If it
is necessary to change language, select one of
the languages, then press the PUSH ENTER
button. Read the warning and select the
I Agree key.
INFO:
If you do not press the PUSH ENTER button,
the system will not proceed to the next step display.
INV0918
In the [CONFIRMATION OF DEST./
WAYPOINT] screen, the following four keys are
displayed.
O To All Destinations
4-16
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
O From Next Waypoint
O Cancel Guidance
When the From Next Waypoint key
is selected
O Change (only in Expert Mode)
INFO:
When the PREVIOUS or MAP button is
pressed in this screen, the [Turn by turn]
screen will be displayed.
INV0920
When the To All Destinations key is
selected
Route guidance will start to all
destinations/waypoints from the current location.
INV0919
1. Select the From Next Waypoint key.
2. When the Yes key is selected, route guidance to the current waypoint is deleted and
route calculation to the next destination will
start.
INFO:
O If you do not want to delete the route guidance, select the No key and the screen
will return to the map.
O This key can be selected only when a
waypoint is set.
O When the PREVIOUS button is pressed,
4-17
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
When the Change key is selected
the previous screen will be displayed.
Select the key when you want to start route
guidance to the next waypoint/destination.
It is possible to edit the route guidance to the
destination.
When the Cancel Guidance key is
selected
INFO:
The route guidance is canceled.
This key is displayed only in [Expert Mode].
INV0922
2. When the Yes key is selected, route guidance is canceled.
INFO:
INV0921
1. Select the Cancel Guidance key.
O If you do not want to delete the route guidance, select the No key and the screen
will return to the map.
O Press the VOICE button to activate the
route guidance again.
INV0923
1. Select the Change key.
O When the PREVIOUS button is pressed,
the previous screen will be displayed.
4-18
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
3. Select the Clear Memory key.
INV0924
INV0909
2. The [EDIT ROUTE] screen will be displayed.
2. Select the Navigation key on the
[NAVIGATION SETTINGS] screen.
Please refer to “Setting the waypoints” on page
5-27.
INV0926
4. Select the Yes key.
CLEARING THE MEMORY
All the stored data (Address Book, Avoid Area,
Previous Dest) can be cleared.
1. Press the SETTING button.
INV0925
INV0927
4-19
Z 01.12.14/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
5. When the Yes key is selected, the stored
data will be cleared, and the [NAVIGATION
SETTINGS] screen will appear.
SETTING THE AVERAGE
SPEED
O Others
Default: 15 MPH (25 km/h)
Max: 35 MPH (55 km/h)
Min: 5 MPH (10 km/h)
1. Press the SETTING button.
This navigation system can calculate and display the expected arrival time to the destination. To do this, set average vehicle speeds
when driving on freeways, main roads and ordinary roads.
INV0928
3. Select the
Set Average Speed for Estimated Journey Time
The following settings are available.
O Freeway
Default: 55 MPH (90 km/h)
Max: 70 MPH (110 km/h)
Min: 40 MPH (60 km/h)
O Main Roads
Default: 25 MPH (40 km/h)
Max: 50 MPH (80 km/h)
Min: 10 MPH (20 km/h)
key on the [NAVIGATION SETTINGS]
screen.
INV0909
2. Select the Navigation key on the [SETTINGS] screen.
4-20
Z 02.7.24/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
INV0929
4. Move the joystick upward or downward to
select an item you want to change.
5. Move the joystick left or right and set an
average vehicle speed.
INFO:
O It is possible to set the item illuminated in
yellow.
O When the Return All Settings to Default
key is selected, all settings return to default.
ABOUT ROUTE GUIDANCE
NOTES ON ROUTE GUIDANCE
O The Infiniti Navigation System may not calculate routes longer than about 1,100 miles
(1,770 km). If your trip is longer than 1,100
miles (1,770 km), please divide your trip by
selecting one or two intermediate destinations. Set your destination as the first intermediate destination. Once you pass the
intermediate destination, you may set your
final destination. Once you pass the intermediate destination, you may set your final
destination as your destination if it is within
1,100 miles (1,770 km). Otherwise, set your
destination using your second intermediate
destination.
O The route selected by the system may not
be the shortest, nor are other circumstances
such as traffic jams considered.
NOTE:
The navigation system does not take
driving in “CAR POOL LANES” into consideration for the guidance, especially
when carpool lanes are separated from
other road lanes.
O Because of the inevitable difference in road
conditions and circumstances between the
time you use this system and the time the
information was produced from the DVD,
there may be discrepancies in roads and
regulations. In such cases, follow the actual
information available.
O During route calculation, the map will not
scroll, however the vehicle icon will move
with the actual vehicle’s movement.
O During route calculation, buttons such as
MAP , DEST , ZOOM OUT
and
ZOOM IN and the joystick will be disabled.
O In some cases, after the calculation is complete, it may take some time to get the calculated route on the display.
4-21
Z 02.7.24/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
O Waypoints that have been passed will not
be covered by the re-routing calculation.
route calculation when the vehicle is closer
to the main road.
O If you scroll the map while the suggested
route is being drawn, it may take more time
to finish drawing.
— If there is no main road within 3.1 miles (5
km) from the destination or waypoint, a
message saying so will appear on the
screen. Try setting the location closer to the
main road.
O If waypoints are set, the system is calculating multiple routes between waypoints simultaneously, and the following may result.
— If one section (or more) of the routes between the waypoints is not found, none of
the route will be displayed.
— The route may not connect completely at
some waypoints.
— The route may require a U-turn close to
some waypoints.
O Route calculation may not be completed in
the following cases.
— If there is no main road within 3.1 miles (5
km) from the vehicle, a message saying so
will appear on the screen. Try requesting
— If the vehicle is too close to the destination
or if there are no branches of the roads to
the destination. A message saying so will
appear on the screen.
— If it is deemed impossible to reach the destination or waypoints because of traffic
regulations, etc.
— If the only route to reach the destination or
waypoints is extremely complicated.
— If the destination, current vehicle position
or waypoint is within the avoid area.
— If the setting of avoid areas covers the
routes to the destination, route calculation
may not be possible.
O The following may occur when the route is
being displayed.
— Even if you are requesting calculation from
the main road, the origin of the route may
not exactly match the current vehicle position.
— Even if you are requesting calculation to the
destination on the main road, the end of the
route may not exactly match the destination.
— Even if you are requesting calculation from
the main road, the system may show a route
from another main road. This may be because the icon to show the current vehicle
position (vehicle icon) is not set accurately.
In that case, park the car in a safe place and
reset the vehicle icon, or continue driving
to see if the vehicle icon appears on the
main road before requesting route calculation again.
— There are cases in which the system shows
4-22
Z 02.7.24/V35 (NAVI) X
HOW DO I OPERATE THE INFINITI NAVIGATION SYSTEM?
a detoured route to reach the destination or
waypoints, if you set them from memory or
facility information. In order to correct this,
you will have to be careful about the traffic
direction, especially when the lanes with
different travel directions are shown separately. Such places are interchanges and
service areas.
— This system makes no distinction between
limited traffic control and total control
(blockage). It may show a detoured route
even if the road is usable.
— Even if the freeway preference is set to OFF,
the route may be set on them. To avoid this,
set a waypoint on another road type and request calculation.
— Even if the preference is set as OFF for a
ferry line, the route may be set on it. To
avoid this, set a waypoint on a road and request calculation.
— Ferry lines, except those which accept only
pedestrians, bicycles and motorcycles, are
stored in this system. When using them,
take into consideration the travel time required and operational condition to decide
whether to use them or not.
ABOUT THE DISPLAY ERROR
The following cases may affect the display accuracy of the vehicle’s position or travel direction. The accuracy will return to normal if the
driving conditions return to normal.
— When there is a similar road nearby.
— When the vehicle is traveling on a long
stretch of straight road or series of curves
with a large radius.
— When the vehicle is traveling in an area with
a checkerboard road system.
— When the vehicle is on a loop bridge.
— When the vehicle is on a snow-covered or
unpaved road.
— When the vehicle has made several consecutive turns or traveled zigzag.
— When the vehicle is rotated on a parking lot
turntable while the ignition switch is OFF.
— Immediately after the vehicle is driven out
of a parking garage or underground parking
lot.
— When the vehicle has different sizes of tires
or tire chains.
— When the vehicle is moved immediately after the engine is started.
— When the vehicle is making consecutive S
curves.
— When the vehicle is at a large Y-shaped
junction.
4-23
Z 02.7.24/V35 (NAVI) X
Z 01.12.14/V35 (NAVI) X
5
HOW DO I PROGRAM A DESTINATION?
Various ways to set the destination (or
waypoint).....................................................
Expert mode categories .........................
Easy mode categories ............................
Setting with Address Book key .........
5-2
5-2
5-2
5-3
Setting with Previous Dest. key ......... 5-5
Setting with Address/Street key ......... 5-6
Setting with Intersection key ............ 5-12
Setting with Point of Interest (POI)
key ........................................................ 5-18
Setting with City key ........................ 5-18
Setting with Phone Number key....... 5-22
Setting with Map key ...................... 5-24
Setting with Country key ................. 5-25
Setting with Home key ..................... 5-26
Having the system guide you to the
destinations ............................................... 5-27
Making the system guide the route with
detailed options.................................... 5-27
Adjusting and deleting the pre-set destination
(waypoints)................................................ 5-32
To delete a destination......................... 5-34
All clear...................................................... 5-35
Quick stop.................................................. 5-36
Quick stop customer setting ................ 5-37
Where am I?.............................................. 5-39
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
O Point of Interest (POI)
VARIOUS WAYS TO SET
THE DESTINATION (OR
WAYPOINT)
O City
O Phone Number
O Map
WARNING
To operate the navigation system or
to use the screen functions, first park
the vehicle in a safe place and set the
parking brake. Using the system
while driving can distract the driver
and may result in a serious accident.
INV0930
EXPERT MODE CATEGORIES
To set the destination and waypoints, you can
choose from the eight categories described below. Use these options to choose the best way
to find the route to the destinations and
waypoints.
O Address Book
O Previous Dest
O Address/Street
O Intersection
INV0931
EASY MODE CATEGORIES
When the Expert Mode is canceled, the following three categories will be displayed as Easy
Mode.
O Home
O Address/Street
5-2
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
O Point of Interest (POI)
INFO:
O Use the Address Book key and the
Point of Interest (POI) key in the same
way as in Expert Mode.
Please refer to “Setting with Address Book
key” and “Setting with Point of Interest
(POI) key” on pages 5-3 and 6-2.
O If the Short Menus key is highlighted in
green in the [SETTING] screen, the screen
is in Easy Mode. In this case, the keys displayed are different from the screen in Expert Mode.
O If you set a destination or waypoints, they
will be displayed with icons.
(POI) or nearby Points of Interest categories, the names called up can be set as the
destination if you do not scroll the screen.
If you want to choose a different place on
the screen from the one called up, you will
have to scroll the screen.
SETTING WITH Address Book KEY
The Address Book will allow you to store locations in the memory. This is especially useful
for locations that you visit frequently.
1. Press the DEST button.
Please refer to “Setting up and editing the address book” on page 7-2.
2. Select the Address Book key on the
[DEST. SETTING] screen.
INV0930
The [DEST. SETTINGS (Address Book)] screen
will be displayed.
O If you want to go to places close to the
stored locations or facilities, use categories
such as facility, nearby facility or memory
for easier setting.
O When using either the Point of Interest
5-3
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV0932
INV0933
3. Select the item key of your destination
(waypoints) on the [DEST. SETTINGS (Address Book)] screen.
4. To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
INV0934
5. To slightly alter the destination.
Select the Map key to display the map
screen of the area around the specified destination (waypoints).
5-4
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
SETTING WITH Previous Dest.
KEY
ously set will be displayed.
This system memorizes the last 10 destinations
previously chosen.
To set new destinations or waypoints from the
previous destinations.
INV0935
6. If necessary, operate the joystick to adjust
the location of the destination (waypoint).
Press the PUSH ENTER button. Select the
Destination key to confirm. The
[DEST. SETTINGS (Address Book)] screen
will be displayed.
To set the destination (waypoint), refer to
“Making the system guide the route with
detailed options” on page 5-27.
INV0937
3. Select the item key of your destination
(waypoints) on the [DEST. SETTINGS (Previous Dest.)] screen.
INV0936
1. Press the DEST button.
2. Select the Previous Dest. key on the
[DEST. SETTINGS] screen.
A total of 10 destinations and locations previ5-5
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV0938
4. To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
INV0939
5. To slightly alter the destination.
Select the Map key to display the map
screen of the area around the specified destination (waypoints).
INV0940
6. If necessary, operate the joystick to adjust
the location of the destination (waypoints).
Press the PUSH ENTER button. Select the
Destination key to confirm. The
[DEST. SETTINGS (Previous Dest.)] screen
will be displayed.
To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
SETTING WITH Address/Street
KEY
Sets the destination (waypoints) from the street
5-6
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
names and addresses that you enter.
There are two search methods; direct search by
the street names, and search by the street
names after the state and/or the city are defined.
stored in the database, then only a map
to the general vicinity will be displayed.
stored in the DVD-ROM.
INV0943
INV0942
Setting with the List key
INV0941
1. First press the DEST button.
2. Select the Address/Street key.
NOTE:
If a house number is entered and it is not
a “direct hit” for house numbers already
The List key is used when you know the
names of the destination and waypoints.
1. A keyboard will be displayed on the [DEST.
SETTINGS (Address/Street)] screen. Enter
the street name you want to set.
2. Enter the street name of your destination.
For example, enter T , then U .
3. Enter U , then select the List key.
The list screen of street names which begin
with TU will appear.
INFO:
It is not possible to enter names if they are not
5-7
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
the screen to input street names will be displayed.
4. Select one street of your destination.
INV0944
INV0946
O If less than 5 suggested streets remain, they
will be displayed automatically.
O The city names and street names will be
displayed.
O Use the joystick to scroll the display.
O When the Next Search key is selected, it
is possible to narrow down cities. To use
this function, refer to “Setting with the
City key” on page 5-11.
O When the PREVIOUS button is pressed,
INV0945
6. To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
5. Enter the house number.
Select the OK key.
INFO:
It may be not possible to specify a location after
selecting the OK key. In that case, a list of
locations which correspond to the entered
house number will be displayed.
5-8
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
actual location. In that case, correct the location using the joystick.
INV0947
INV0949
Setting with the State key
7. To slightly alter the destination.
Select the Map key to display the map
screen of the area around the specified destination (waypoints).
INFO:
O An approximate location corresponding to
the entered house number is displayed. If
necessary, correct the location using the
joystick.
O The location displayed by the calculation
using the house number may differ from the
INV0948
8. If necessary, operate the joystick to adjust
the location of the destination (waypoint).
Press the PUSH ENTER button. Select the
Destination key to confirm. The
[DEST. SETTINGS (Address/Street)] screen
will be displayed.
To set the destination (waypoint), refer to
“Making the system guide the route with
detailed options” on page 5-27.
The State key is used when you select a state
to set the destination.
1. Select the State key.
5-9
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV0950
INV0951
2. The display shows the screen to select
states.
Input a state name.
When the Last 5 States key is selected
in step 2, the history of the previous five
settings will be listed.
INV0952
3. The display shows the state list.
Select a state name.
5-10
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV0953
4. The screen returns to the [DEST. SETTINGS
(Address/Street)] screen.
When the state is set, the display shows the
selected state next to the State key.
Input the street name.
Please refer to “Setting with the List key”
on page 5-7.
INV0954
Setting with the City key
INV0955
2. Input a city name.
The City key is used when you select a city
to set the destination.
1. Select the Address/Street key on the
[DEST. SETTINGS (Address/Street)]
screen.
Select the City key.
O The display shows the screen to retrieve cities.
INV0956
When the Last 5 Cities key is selected in
5-11
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
SETTING WITH Intersection KEY
step 2, the history of the previous five settings
will be listed.
This will allow you to set an intersection as a
destination (waypoints).
INFO:
It is not possible to select cities if they are not
in the state you set.
INV0958
4. The screen returns to the [DEST. SETTINGS
(Address/Street)] screen.
When the city is set, the display shows the
selected city side City key.
INV0957
3. The display shows the city list.
Select a city of your choice.
Input the street name of your choice.
Proceed to “Setting with the List key” on
page 5-7.
INV0959
1. Press the DEST button.
2. Select the Intersection key.
A keyboard will be displayed.
5-12
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
O When entering a street name, enter a minor
street name as the first street and the calculation will be easier and quicker.
INV0960
Setting with the List key
The List key is used when you know the
names of the destinations and waypoints.
1. Enter the first street name where the destination (waypoints) is located using the
keyboard, then select the List key.
INV0961
2. Select the first street name using the same
procedures.
INV0962
INFO:
O When the Next Search key is selected, it
is possible to narrow down states and cities. To use this function, refer to “Setting
with the City key” on page 5-17.
O For a road where lanes with different traffic
directions are shown separately, the list
shows first street name, second street
name, ...
3. Enter the 2nd (intersecting) street name,
then select the List key.
INFO:
If there are less than 5 streets which intersect
the first street, they will be displayed automatically.
5-13
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV0963
4. Select the name of the second street.
The [DEST. SETTINGS (Intersection)] screen
will appear.
INV0964
5. To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
INV0965
6. To slightly alter the destination.
Select the Map key to display the map
screen of the area around the specified destination (waypoints).
5-14
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
street name list may not be displayed:
O A street name is being input after the
City key has been selected.
O List is being displayed by selection of
the List key.
INV0966
INV0968
7. If necessary, operate the joystick to adjust
the location of the destination (waypoint).
Press the PUSH ENTER button. Select the
Destination key to confirm. The
[DEST. SETTINGS (Intersection)] screen
will be displayed.
To set the destination (waypoint), refer to
“Making the system guide the route with
detailed options” on page 5-27.
2. The display shows the screen to select
states.
NOTE:
When the corresponding data does not
exist under the following conditions, the
Input a state name.
INV0967
Setting with the State key
The State key is used when you select a state
to set the destination.
1. Select the State key.
5-15
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV0969
When the Last 5 States key is selected
in step 2, the history of the previous five
settings will be listed.
INV0970
3. The display shows the state list.
Select a state name.
INV0971
4. The screen returns to the [DEST. SETTINGS
(Intersection)] screen.
When the state is set, the display shows the
selected state next to the State key.
Input the street name.
Please refer to “Setting with the List key”
on page 5-13.
5-16
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
step 2, the history of the previous five settings
will be listed.
INFO:
It is not possible to select cities if they are not
in the state you set.
INV0972
Setting with the City key
INV0973
2. Input a city name.
The City key is used to retrieve an intersection from the specified city to set the destination.
INV0975
1. Select the City key.
O The display shows the screen to retrieve cities.
3. The display shows the city list.
Select a city of your choice.
INV0974
When the Last 5 Cities key is selected in
5-17
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
SETTING WITH City KEY
Sets the destination (waypoints) on the map
screen of the area in and around the input city.
1. Press the DEST button.
INV0976
4. The screen returns to the [DEST. SETTING
(Intersection)] screen.
When the city is set, the display shows the
selected city next to the City key.
Input the street name of your choice.
Proceed to “Setting with the List key” on
page 5-13.
INV0977
SETTING WITH
Point of Interest (POI) KEY
The Infiniti Navigation System includes a database of Point of Interest (POI) locations such
as restaurants, hotels, and gas stations. (refer
to section 6.)
By using this feature, you can set a Point of
Interest location as a destination. For details on
how to use the POI feature, please refer to section 6.
INV0978
2. Select the City key on the [DEST. SETTINGS] screen.
5-18
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
O If less than 5 suggested cities remain, they
will be displayed automatically.
INV0979
INV0981
Setting with the List key
The List key is used when you know the
names of the destination and waypoints.
1. Enter the characters of the city name which
you wish to set as a destination (waypoints)
using the keyboard on the [DEST. SETTINGS (City)] screen, then select the List
key.
INV0980
2. Select the city name of your destination
(waypoints) on the [DEST. SETTINGS
(City)] screen.
3. To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
INFO:
O When the List key is selected, the data of
the currently-listed cities will be displayed.
5-19
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV0982
4. To slightly alter the destination.
Select the Map key to display the map
screen of the area around the specified destination (waypoints).
INV0983
5. If necessary, operate the joystick to adjust
the location of the destination (waypoints).
Press the PUSH ENTER button. Select the
Destination key to confirm.
The [DEST. SETTINGS (City)] screen will
be displayed.
To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
INV0984
Setting with the State key
The State key is used when you select a state
to set the destination.
1. Select the State key.
O List is being displayed by selection of
the List key.
5-20
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV0985
INV0986
2. The display shows the screen to select
states.
When the Last 5 States key is selected
in step 2, the history of the previous five
settings will be listed.
Input a state name.
INV0987
3. The display shows the state list.
Select a state name.
5-21
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
screen of the area and around the input phone
number.
1. Press the DEST button.
INV0988
INV0995
4. The screen returns to the [DEST. SETTINGS
(City)] screen.
3. Enter the ten-figure phone number, destination (waypoints) using the keyboard on
the [DEST. SETTINGS (Phone Number)]
screen.
When the state is set, the display shows the
selected state next to the State key.
Input the street name.
Please refer to “Setting with the List key”
on page 5-19.
INV0994
2. Select the Phone Number key on the
[DEST. SETTINGS] screen.
4. If you select the OK key, the [DEST. SETTINGS (Phone Number)] screen will be displayed.
SETTING WITH Phone Number
KEY
Sets the destination (waypoints) on the map
5-22
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV0996
5. To set the destination (waypoints), refer to
“Making the system guide the route with
detailed options” on page 5-27.
INV0997
6. To slightly alter the destination.
Select the Map key to display the map
screen of the area around the specified destination (waypoints).
INV0998
NOTE:
If you select the Map key in step 4, the
map screen of the area around the
specified destination (waypoints) will
be displayed.
If necessary, operate the joystick to adjust the
location of the destination (waypoints).
Press the PUSH ENTER button.
Select the Destination key to confirm.
To set the destination (waypoints), refer to
5-23
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
“Making the system guide the route with detailed options” on page 5-27.
roundings on the map before setting the destinations.
INV1000
INV1004
INV0999
INFO:
1. Press the DEST button.
When a hospital is set as a destination, a telephone number of the destination will be displayed.
2. Select the Map key.
3. Operate the joystick to choose the destination (waypoints).
The map of the entire area will be displayed.
SETTING WITH Map KEY
This will enable you to zoom into the map for
detail and set the desired location. This works
best when you know the location geographically, or want to check the geographical sur5-24
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
SETTING WITH Country KEY
INV1001
INV1002
4. Adjust the location using the joystick, and
press the PUSH ENTER button.
6. Please refer to “Making the system guide
the route with detailed options” on page
5-27.
5. Select the Destination key.
The [DEST. SETTINGS] screen will appear.
When the Address/Street , Intersection ,
City , or Point of Interest (POI) key is used
to set the destination (waypoints) in other
countries, they are retrieved from the areas in
the country which has been set in the country
category. When setting the destination
(waypoints) in other countries, select a country
first.
INFO:
When the OK key is selected in the [DEST.
SETTINGS] screen, route calculation starts. If
you want to add destinations, select the
Waypoint key.
INV1175
1. Press the DEST button.
5-25
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
The [DEST. SETTINGS] screen will be displayed.
Select the Country key.
INFO:
In the Expert Mode, this key will not be displayed. Turn on the highlighted green
Short Menus key in the [SETTINGS] screen.
INV1003
3. The [DEST. SETTINGS] screen will be displayed.
Set the OK key.
INV1176
2. Select the Country key and each time the
PUSH ENTER button is pressed, USA replaces CANADA, and vice versa.
3. Then, the selected country will be displayed
at the right of the Country key.
SETTING WITH Home KEY
INV0931
1. Press the DEST button.
2. Select the Home key.
To set the destination (waypoints), refer to
“Making the system guide the route with detailed options” on page 5-27.
INFO:
If the home is not registered in the Address
Book, the [EDIT ADDRESS BOOK
(Address/Street)] screen will be displayed.
Sets the home as a destination.
5-26
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
Please refer to “Setting with Address/Street
key” on page 5-6.
ods described earlier in this chapter:
— Address Book
HAVING THE SYSTEM
GUIDE YOU TO THE DESTINATIONS
— Previous Destination
— Address/Street
— Intersection
WARNING
To operate the navigation system or
to use the screen functions, first park
the vehicle in a safe place and set the
parking brake. Using the system
while driving can distract the driver
and may result in a serious accident.
— Point of Interest (POI)
INV1006
MAKING THE SYSTEM GUIDE
THE ROUTE WITH DETAILED
OPTIONS
By choosing the destination from the menu,
you can choose detailed options such as
waypoints and calculation conditions and have
the system guide you from the current position
to the destination.
— City
— Phone Number
— Map
— Home
2. Set the route priorities and select the
Route Calc. key to calculate the route.
Setting the destination
First, you will have to set the destination.
1. Select a destination using one of the meth5-27
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
Setting the waypoints
Please refer to “Expert mode categories” on
page 5-2.
1. Select
the
key or
key on the [EDIT ROUTE]
screen.
INV1007
INV1008
INFO:
O If you select the OK key at this point,
route calculation will start without any
waypoints.
O Press the PREVIOUS button to display
the [EDIT ROUTE] screen.
After you set a destination, you can set
waypoints.
INFO:
O When the ROUTE button is pressed on
the map and the Edit Route key is selected, the [EDIT ROUTE] screen will be displayed.
O The maximum number of destinations and
waypoints that can be set is six (6).
INV1009
The [EDIT ROUTE] screen will be displayed.
2. Select a waypoint destination using one of
the destination selection procedures outlined earlier in the chapter.
5-28
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
the [EDIT ROUTE] screen.
O It is also possible to set a waypoint by selecting the Waypoint key in the [DEST.
SETTING] screen.
Setting the priorities for route
calculation
INV1010
Select the conditions with high priorities.
After the setting of destinations and waypoints
is completed, set the calculation conditions
such as route type with high priorities.
The screen for setting calculation conditions
will appear. The conditions with the indicator
light ON will have high priority.
INFO:
When the ROUTE button is pressed on the
map and the Edit Route key is selected, the
[EDIT ROUTE] screen will be displayed.
If you want to get to your destination in the
shortest time, select the Shortest Time key.
Select the key on the screen to turn the indicator light ON or OFF .
INFO:
INV1012
O When you select the OK key at this point,
route calculation will start without any additional waypoints.
O Press the PREVIOUS button to display
INV1011
2. Select the conditions with high priorities.
Select the key on the screen to turn the indicator light ON or OFF .
1. Select the Priorities key.
5-29
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
Shortest Time key:
Minimize FWY key:
The route to the destination is calculated so
that you can reach the destination in the shortest time. In some cases, a freeway or toll road
with detours may be recommended.
The route to the destination is calculated with
minimum use of freeways.
NOTE:
The route using time restricted roads is calculated.
Use Time Restricted Roads key:
It may not be the shortest time in all
cases.
The route to the destination is calculated so
that it is the shortest distance.
The route to the destination is calculated with
minimum use of toll roads.
The system considers time restricted roads as
whole-day restricted. When the key is set to
OFF , time restricted roads will not be included
in route calculation.
When the route is calculated with this
key ON, be sure to obey traffic regulations.
NOTE:
Minimize Toll Road key:
INFO:
WARNING
Shortest Distance key:
It may not be the shortest distance in all
cases.
When the Yes key is pressed, route calculation will start.
Use Ferry Route key:
INV1013
When this key is selected and the OK key is
pressed, a confirmation screen will be displayed.
Select this key if you prefer routes with ferry
lines.
5-30
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
Route calculation and guidance
OK key. Reset a correct destination.
INV1015
INV1014
Route calculation screen will be displayed.
After setting all the items required, you may
proceed to route calculation for guidance. After
the route calculation is completed, the guidance will start automatically.
The suggested route will be displayed with a
thick blue line. If you enter this route, the voice
guide will start.
INFO:
O If you want to cancel the route calculation,
press the CANCEL button.
When the ROUTE button is pressed on the
map and the OK key is selected, the [EDIT
ROUTE] screen will be displayed.
Select the Route calc. key.
INFO:
O If you set a place which is not suitable as
a destination, the suggested route will not
be displayed. In such a case, the OK key
will be displayed on the screen. Select the
INV1016
O If route calculation is not possible with all
the set preferences, the system may look up
a route that does not exactly correspond to
the preferences.
O When deleting the settings of destination or
waypoints, press the ROUTE button.
Enlarged intersection display
When the vehicle approaches a guide point
such as an intersection, the enlarged map of
the point will be displayed.
5-31
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
guidance start point, the enlarged
map may not be displayed.
O The guide point name may not be displayed.
O The position of the vehicle icon on the
enlarged map may differ from the position on the current display.
INV1017
INFO:
1. Press the MAP or PREVIOUS button.
The map screen will appear.
O When no operation is executed with the enlarged map displayed, the map stays displayed.
To display the enlarged map, press the MAP
button or PREVIOUS button.
2. When the vehicle arrives at the neighborhood of the destination, the route guidance
will end automatically.
INFO:
O To alternate between the map and the enlarged screen, press the MAP button or
PREVIOUS button.
O In the map screen, the distance to the next
guide point and the turning direction will be
displayed on the right side of the screen.
O If route numbers are included in the map
data, route numbers will be displayed on
the left side of the screen.
O If street names are displayed in two lines,
route numbers will not be displayed.
INFO:
ADJUSTING AND DELETING
THE PRE-SET DESTINATION
(WAYPOINTS)
NOTE:
Using the joystick, you can adjust the destination (waypoints).
O When the guide point is close to the
1. Press the ROUTE button.
INV1018
5-32
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
want to adjust on the [EDIT ROUTE] screen.
INV1019
INV1022
INV1021
2. Select the Edit Route key.
4. The map screen will be displayed for adjusting. Use the joystick to adjust the location.
5. Select the Adjust key.
The new destination (waypoints) will be set.
INFO:
When you move the joystick, the Adjust key
will be displayed.
INV1020
3. Choose the destination (waypoints) you
5-33
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV1023
INV1024
TO DELETE A DESTINATION
2. Select the Yes key.
1. To delete the destination (waypoint),
choose the destination (waypoint) in step 3
and select the Delete key.
The pre-set destination (waypoints) will be deleted.
INV1025
3. Press the Map button to return to the map
screen.
INFO:
O To set a new destination (waypoints), refer
to “Expert mode categories” or “Easy mode
categories” on page 5-2.
O If you reset the new destination (waypoints),
the older destination (waypoints) will be deleted. If you have requested a route calculation, the previous suggested route will be
deleted from memory.
5-34
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV1019
ALL CLEAR
The destination and waypoint can be deleted at
one time.
INV1177
2. The [EDIT ROUTE] screen will be displayed.
INV1178
3. Select the Yes key.
Select the All Clear key.
1. Press the ROUTE button.
Several keys will be displayed on the right
of the screen.
Select the Edit Route key.
5-35
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INFO:
Five categories are displayed on the screen.
The last one can be customized. When you use
a POI category frequently, it is convenient to
use the quick stop function. Please refer to
“Quick stop customer setting” on page 5-37.
INV1026
QUICK STOP
The system will display pre-defined POI’s
(Points of Interest) in the current vicinity of the
vehicle and the distances to them. These POI’s
can be gas stations, hotels, restaurants, ATM’s
or customer-programmed facilities. This function will operate while the vehicle is moving.
1. Press the ROUTE button.
The display shows several keys on the right of
the screen.
INV1027
2. The display shows the [QUICK STOP]
screen.
Select the category of your choice.
INV1028
3. The cuisine selection screen is displayed
only when the RESTAURANT key is selected. Select the All key or Fast Food
key.
Select the Quick Stop key.
5-36
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV1029
INV1030
4. The display shows the direction and distance from the current vehicle position to
the selected facility.
5. Set route priorities, then select the
OK key. Route calculation to the destination will be started.
Select the facility name you want to set as
a destination (waypoints).
INFO:
If quick stop is set after the destination was set,
the system starts the route calculation to the
location as the waypoint. Five waypoints can be
registered at the same time.
INV0909
QUICK STOP CUSTOMER SETTING
1. Press the SETTING button.
2. Select the Navigation key on the [SETTINGS] screen.
5-37
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV1031
INV1032
INV1033
3. Select the
Quick Stop Customer Settings key on
the [NAVIGATION SETTINGS] screen.
4. Select a facility you frequently visit. For example, select the INFINITI DEALER key.
5. Press the ROUTE button. Then, select the
Quick Stop key, and press the PUSH
ENTER button. The display shows the selected facility in the last row.
When it is set, the screen returns to the previous screen.
Press the MAP button to return to the
map.
5-38
Z 01.12.14/V35 (NAVI) X
HOW DO I PROGRAM A DESTINATION?
INV1005
INV1034
INFO:
WHERE AM I?
When a hospital is set as a destination, a telephone number of the destination will be displayed.
This key is used to find the name of the street
on which the vehicle is currently located.
1. Press the ROUTE button.
Several keys appear on the right of the screen.
Select the Where am I? key.
INV1035
2. The display shows the [WHERE AM I?]
screen, which includes the next, current,
and previous streets. Each one shows the
streets which the vehicle is approaching,
currently traveling on, and those streets the
vehicle was previously traveling on.
Press the MAP or PREVIOUS button to
return to the map.
5-39
Z 01.12.14/V35 (NAVI) X
Z 01.12.14/V35 (NAVI) X
6
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
Setting with Point of Interest (POI) key... 6-2
Setting with the List key.................... 6-2
Setting with the Category key............ 6-4
Setting with the State key.................. 6-7
Setting with the City key .................. 6-9
Setting with the Nearby key............. 6-11
POI categories ........................................... 6-12
Setting the nearby display icons ............... 6-13
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
SETTING WITH
Point of Interest (POI)
NOTE:
KEY
For speedier search, input the state, city
and category before searching for your
desired destination.
The keys in Point of Interest (POI) are List, Category, Nearby, State and City, explained below.
INFO:
INV1037
If the system detects that the number of corresponding facilities or cities is five or less, the
display shows the list screen automatically.
SETTING WITH THE List KEY
The List key is used when you know the exact names of the destinations and waypoints.
1. Input the facility name for your destination.
INV0977
1. First press the DEST button.
2. Select the Point of Interest (POI) key on
the [DEST. SETTING (POI)] screen.
INV1038
2. The display shows the screen to select a facility or Info key.
6-2
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
INV1039
INV1040
When the Next Search key is selected, it is
possible to narrow down categories, states and
cities.
3. When a facility name is selected, the display
shows the [DEST. SETTINGS (POI)] screen
to set the destination.
To use this function, refer to “Setting with the
Category key”, “Setting with the State key”
and “Setting with the City key” on pages 6-4,
6-7 and 6-9.
To set priorities, select the OK key. Then,
the route calculation will be started.
When you alter the destination or set
waypoints, select the Waypoint key.
INFO:
Please refer to “Making the system guide
the route with detailed options” on page
5-27.
It is not possible to select the key which is set
to narrow down.
INV1041
O When the Info key next to the facility
name of your choice is selected in step 2,
the display shows the detailed [Address]
and [Telephone number] of the selected facility, and the Map and Enter keys.
6-3
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
INV1040
4. When setting the facility as the destination,
select the OK key. The display shows the
[DEST. SETTING (POI)] screen to set the
destination.
Set priorities and select the OK key.
Then, the route calculation will be started.
When you alter the destination or set
waypoints, select the Waypoint key.
Please refer to “Making the system guide
the route with detailed options” on page
5-27.
INV1042
O When the Map key is selected, the display shows the map. When the PUSH ENTER button is pressed, the display shows
the Destination key.
INV1043
SETTING WITH THE Category
KEY
The Category key is used when you select a
facility category to set the destination.
1. Select the Category key.
6-4
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
INV1044
2. The display shows the screen to select categories.
Input a category name.
INV1045
O When the Last 5 Categories key is selected in step 2, the history of the previous
five settings will be listed.
INV1046
3. The display shows the category list.
Select a category name.
INFO:
When the RESTAURANT key is selected, the
screen to input the cuisine type will be displayed.
6-5
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
O It may take some time to show the list, depending on categories.
INV1047
4. The screen returns to the [DEST. SETTINGS
(POI)] screen.
When the category is set, the display shows
the selected category beside the
Category key.
Input the facility name.
INFO:
O If you do not know the facility name you
want to go to, select the List key so that
the facility names in the category will be
listed in alphabetical order.
INV1049
INV1048
5. When a facility name is input, the system
retrieves the facility name according to the
selected category and the input letters.
Then, the display shows the screen to select
a facility and Info key.
Please refer to “Setting with the List key”
on page 6-2.
When the Next Search key is selected, it is
possible to narrow down states and cities.
To use this function, refer to “Setting with the
State key” and “Setting with the City key”
on pages 6-7 and 6-9.
INFO:
It is not possible to select the key which is set
to narrow down.
6-6
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
INV1050
SETTING WITH THE State KEY
The State key is used when you select a state
to set the destination.
INV1051
INV1052
2. The display shows the screen to select
states.
When the Last 5 States key is selected in
step 2, the history of the previous five settings
will be listed.
Input a state name.
1. Select the State key.
6-7
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
INV1053
3. The display shows the state list.
Select a state name.
INV1054
INV1055
4. The screen returns to the [DEST. SETTINGS
(POI)] screen.
5. When a state name is input, the system retrieves the state name according to the input
letters.
When the state is set, the display shows the
selected state next to the State key.
Input the state name.
Please refer to “Setting with the List key”
on page 6-2.
INFO:
If you do not know the state name you want to
go to, select the List key so that the state
names will be listed in alphabetical order.
6-8
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
INV1056
When the Next Search key is selected, it is
possible to narrow down categories and cities.
To use this function, refer to “Setting with the
Category key” and “Setting with the City
key” on pages 6-4 and 6-9.
INFO:
INV1057
SETTING WITH THE City KEY
INV1058
2. Input a city name.
The City key is used to retrieve a facility from
the specified city to set the destination.
1. Select the City key.
O The display shows the screen to retrieve cities.
It is not possible to select a key which has been
removed from the search.
INV1059
When the Last 5 Cities key is selected in
6-9
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
O It may take some time to show the list, depending on categories.
step 2, the history of the previous five settings
will be listed.
INV1061
INV1060
3. The display shows the city list.
Select a city of your choice.
4. The screen returns to the [DEST. SETTINGS
(POI)] screen.
When the city is set, the display shows the
selected city beside the City key.
Input the facility name of your choice.
INFO:
O If you do not know the facility name, select
the Category key to retrieve a facility.
When the facility is set from the Category
key, the display shows the selected facility
under the Category key.
INV1062
5. When the facility name is input, the system
retrieves the facility name according to the
selected city and the input letters. Then, the
display shows the screen to select a facility
and Info key.
Please refer to “Setting with the List key”
on page 6-2.
6-10
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
listed from the nearest to the farthest.
O The Nearby key is available only when a
category is set. Set a category first.
INV1063
SETTING WITH THE Nearby KEY
The Nearby key is used to retrieve a facility
within 30 miles (50 km) from the current vehicle location.
1. Select the Point of Interest (POI) key on
the [DEST. SETTINGS (POI)] screen.
2. Set category according to page 6-4.
3. Select the Nearby key.
INFO:
INV1064
O When there are any nearby facilities based
on the selected category, the display shows
the list of facility names, directions and distance from the current vehicle location, and
Info keys.
Please refer to “Setting with the List key”
on page 6-2.
O Facilities in the selected category will be
6-11
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
POI CATEGORIES
AIRPORT
AMUSEMENT PARK
ATM
AUTO SERVICE & MAINTENANCE
AUTOMOBILE CLUB
BANK
BORDER CROSSING
BOWLING CENTER
BUS STATION
BUSINESS FACILITY
CASINO
CITY CENTER
CITY HALL
COLLEGE AND UNIVERSITY
COMMUNITY CENTER
COMMUTER RAIL STATION
CONVENTION/EXHIBITION CENTER
COURT HOUSE
FERRY TERMINAL
GAS STATION
GOLF COURSE
GROCERY STORE
HISTORICAL MONUMENT
HOSPITAL
HOTEL
ICE SKATING RINK
INFINITI DEALER
LIBRARY
MARINA
MOVIE THEATER
MUSEUM
NIGHTLIFE
NISSAN DEALER
OTHERS
PARK & RIDE
PARK/RECREATION AREA
PARKING GARAGE
PARKING LOT
PERFORMING ARTS
POLICE STATION
RENTAL CAR AGENCY
REST AREA
RESTAURANT
SCHOOL
SHOPPING
SKI RESORT
SPORTS CENTER
SPORTS COMPLEX
TOURIST ATTRACTION
TOURIST INFORMATION
TRAIN STATION
WINERY
6-12
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
SETTING THE NEARBY DISPLAY ICONS
Five types of facilities can be displayed on the
map using respective icons, including:
— ATMs
— Gas stations
— Hotels
— Restaurants
— Rest areas
1. Press the SETTING button on the control
panel.
INV0909
INV1065
2. Select the Navigation key on the [SETTINGS] screen.
3. Select the Nearby Display Icons key on
the [NAVIGATION SETTINGS] screen.
The [NEARBY DISPLAY ICONS] screen will be
displayed.
6-13
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE POINT OF INTEREST (POI) FEATURE?
INV1066
INV1067
4. Select the facility you wish to display, and
press the PUSH ENTER button.
The icons of the selected facilities will be displayed.
INFO:
INFO:
Every time the PUSH ENTER button is pressed,
the indicator lights of the items are turned ON
and OFF alternately.
When the MAP button is pressed, the current
location will be displayed.
ON: To display nearby icons.
INV1111
INFO:
When a hospital is set as a destination, a telephone number of the destination will be displayed.
When the PREVIOUS button is pressed, the
previous screen will reappear.
OFF: To stop displaying nearby icons.
6-14
Z 01.12.14/V35 (NAVI) X
7
HOW DO I USE THE ADDRESS BOOK FEATURE?
Setting up and editing the address book .... 7-2
Setting up the address book ....................... 7-2
Using various categories to store
locations ................................................ 7-2
Storing current vehicle position ............ 7-3
Storing locations of your choice............ 7-4
Confirming the stored locations ........... 7-5
Editing the address book............................. 7-6
Changing stored names ......................... 7-6
Changing the icons ................................ 7-7
Adjusting the stored address book
entries................................................... 7-11
Deleting stored locations ..................... 7-12
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
SETTING UP AND EDITING
THE ADDRESS BOOK
The [NAVIGATION SETTINGS] screen will be
displayed.
You can store locations in the address book for
quicker access, or name the location and set
a special icon on the map.
3. Select the Edit Address Book key.
SETTING UP THE ADDRESS
BOOK
You can store your favorite places or the places
you frequently visit. By storing them, you can
call them quickly on the display, enabling
easier setting of these destinations.
INV0909
2. Select the Navigation key.
INV1069
USING VARIOUS CATEGORIES
TO STORE LOCATIONS
You can choose various categories in the menu
to store the locations. The categories are:
Address/Street, Points of Interest (POI), Phone
Number, Map, Intersection, City and Previous
Dest.
The [EDIT ADDRESS BOOK] screen will be displayed.
4. Choose an unused number location on the
address book list.
INV1068
1. Press the SETTING button.
7-2
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
O If you want to store places close to
POI, it is quicker to use the
Points of Interest (POI) key.
STORING CURRENT VEHICLE
POSITION
1. Press the SETTING button.
INV1070
INV1071
5. Store location.
3. The [NAVIGATION SETTINGS] screen will
be displayed.
Set a location to be stored in the same way as
when setting a destination (waypoints).
4. Select the Save Current Location key.
Please refer to “Export Mode Categories” on
page 5-2.
INV0909
INFO:
O Press the MAP button to go back to get
the current vehicle display.
2. Select the Navigation key.
The current location of the vehicle will be
stored in the next available address book location, and be displayed on the vehicle icon
screen.
O The maximum number of the stored locations is 50, including your home and office.
7-3
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
O The unused and smallest identification
number will be assigned to the newly set
location.
2. Select the Store Place key.
STORING LOCATIONS OF
YOUR CHOICE
INV1072
INV1074
INFO:
O If the number of the stored locations exceeds 50, a message will appear “Memory
is full. Delete old one to store new one”.
O If you store more than one location at the
same place, the location stored in the database with the largest identification number will be displayed.
O If you store the location by the location
store function, the stored name may differ,
depending on the scale used in the display.
The registered number will be displayed at that
location on the map.
INV1073
You can use the joystick to store desired locations.
INFO:
Press the MAP or PREVIOUS button to go
back to the current vehicle display.
1. Scroll the map to the desired location with
the joystick, then press the PUSH ENTER
button. The display shows several keys on
the right of the screen.
7-4
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
CONFIRMING THE STORED
LOCATIONS
To confirm that the locations have been stored:
1. Press the SETTING button.
INV1068
INV1076
The [NAVIGATION SETTINGS] screen will be
displayed.
4. Choose the Map key next to the location
that you want to confirm.
3. Select the Edit Address Book key.
INV0909
2. Select the Navigation key.
7-5
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
EDITING THE ADDRESS
BOOK
INV1077
INV1068
2. Select the Navigation key.
The stored location will be displayed on the
map.
INFO:
O If you want to confirm several stored locations, press the PREVIOUS button.
O To go back to the map display, press the
MAP button.
INV0909
3. Select the Edit Address Book key.
You can alter the names or the icons of the
stored locations.
CHANGING STORED NAMES
1. Press the SETTING button.
7-6
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
INV1078
4. Choose the stored location you want to
change the name of.
INV1079
5. Select the Rename key.
The change name screen will be displayed.
INV1080
6. Select the Set key after entering the new
name.
INFO:
To go back to the map display, press the
MAP button.
CHANGING THE ICONS
1. You can display the icon at a stored location.
Press the SETTING button.
7-7
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
The [NAVIGATION SETTINGS] screen will be
displayed.
3. Select the Edit Address Book key.
INV0909
INV1082
5. Select the Landmark Icon key.
2. Select the Navigation key.
INV1081
4. Choose a stored location where you want to
set the icon.
INV1068
7-8
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
INV1083
INV1084
6. Choose an icon.
INFO:
The picture displayed on the left [icon] is a
planview icon and the picture displayed on the
right [icon] is a BirdviewTM icon.
O To go back to the screen displaying the
current vehicle position, press the
MAP button.
The icon of the stored location will be set.
O If you press the PREVIOUS button, the
screen will go back to the screen displayed
in step 5.
O If you alter the icon of the stored location,
the icon on the map will also change.
7-9
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
Legend of icons which can be set for the stored locations
INV1755
7-10
Z 02.7.18/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
ADJUSTING THE STORED ADDRESS BOOK ENTRIES
You can easily adjust the point of the stored
location with the joystick.
1. Press the SETTING button.
INV1068
INV1085
The [NAVIGATION SETTINGS] screen will be
displayed.
4. Choose the Map key next to the stored
location you want to adjust.
3. Select the Edit Address Book key.
INV0909
2. Select the Navigation key.
7-11
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
The location is updated after the update message is shown. The screen goes back to the
screen displayed in step 4.
INFO:
To go back to the screen displaying the current
vehicle position, press the MAP button.
INV1086
5. Use the joystick to set the new location.
DELETING STORED LOCATIONS
You can delete the stored locations you no
longer need from the system memory.
INV0909
2. Select the Navigation key.
1. Press the SETTING button.
INV1087
INV1068
6. Select the Adjust key.
7-12
Z 02.7.18/V35 (NAVI) X
HOW DO I USE THE ADDRESS BOOK FEATURE?
3. The [NAVIGATION SETTINGS] screen will
be displayed.
correct, select the Yes key. The location
will be deleted. After the deletion message
is shown the screen goes back to the screen
displayed in step 4.
Select the Edit Address Book key.
INFO:
To go back to the screen displaying the current
vehicle position, press the MAP button.
INV1089
5. Select the Delete key.
INV1088
4. Select the location you want to delete.
INV1090
6. The system will ask for a confirmation. If
7-13
Z 01.12.14/V35 (NAVI) X
Z 01.12.14/V35 (NAVI) X
8
HOW DO I USE THE AVOID AREA FEATURE?
Setting avoid areas......................................
Setting with the selected location key ........
Renaming the avoid areas .....................
Deleting the avoid areas ........................
Setting with the Map key ...................
8-2
8-5
8-5
8-6
8-7
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AVOID AREA FEATURE?
SETTING AVOID AREAS
Setting avoid areas will give you a route away
from areas you wish to avoid.
INFO:
If the vehicle icon is in the avoid area, route
calculation cannot be completed.
1. Press the SETTING button.
INV1091
INV1092
3. The display shows the [NAVIGATION SETTINGS] screen.
4. The display shows the [AVOID AREA SETTINGS] screen.
Select the Avoid Area Setting key.
Select a key which is not set as an avoid area.
INFO:
It is possible to set up to 10 areas to avoid.
INV0909
2. Select the Navigation key.
8-2
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AVOID AREA FEATURE?
INV1093
INV1094
5. The display shows categories which can be
used to set an avoid area.
6. The display shows the map which centers
the area to be set as an avoid area.
For example, use the Map key to set an avoid
area.
Use the ZOOM IN or ZOOM OUT button
to adjust the map reduction scale.
INV1095
7. Use the joystick to adjust the location.
INFO:
Area size: Max. 5 x 5 miles (8 x 8 km)
Select the Map key.
INFO:
For setting with other categories, please refer
to “Expert mode categories” on page 5-2.
8-3
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AVOID AREA FEATURE?
INV1096
INV1097
8. The display shows the keys on the right of
the screen.
O The avoid area is set, and the grid will be
displayed on the screen.
Select the Set key.
INFO:
INFO:
The grid color will be displayed in green or
blue.
O If you want to avoid the freeway in that area,
key to turn on the green inselect the
dicator on the key. (Indicator ON: avoid,
OFF: do not avoid)
INV1098
O Please refer to “Making the system guide
the route with detailed options” on page
5-27.
If the route guidance is not set, the display
shows the current vehicle location.
(Avoid Freeway ON: green, OFF: blue)
If the route guidance is set, the display shows
the [AVOID AREA SETTINGS] screen.
O When altering the size of the avoid area, select the Area key. The area size is increased or decreased by three scales.
8-4
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AVOID AREA FEATURE?
SETTING WITH THE SELECTED LOCATION KEY
When the stored avoid area is selected, the
avoid area can be renamed or deleted.
INV1091
INV1099
3. The display shows the [NAVIGATION SETTINGS] screen.
4. The display shows the [AVOID AREA SETTINGS] screen.
Select the Avoid Area Setting key.
Select a key which is set as an avoid area.
INV0909
RENAMING THE AVOID AREAS
1. Press the SETTING button.
2. Select the Navigation key.
8-5
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AVOID AREA FEATURE?
Enter the area name using the keyboard.
When the Set key is selected, the avoid area
is renamed, and the screen returns to the previous screen.
DELETING THE AVOID AREAS
1. Select the Delete key on the screen in
step 5 under “Renaming the avoid areas”.
INFO:
INV1100
5. Select the Rename key.
When the Back Space key is selected, the
cursor moves back to the previous letter. When
the Space key is selected, the cursor proceeds to make one space.
INV1103
2. Select the Yes key.
The avoid area is deleted.
If the route guidance is set, the display shows
the [AVOID AREA SETTINGS] screen.
INV1101
6. The display shows the keyboard.
INV1102
INFO:
When the No key is selected, the avoid area
8-6
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AVOID AREA FEATURE?
will not be deleted, and the screen returns to
the previous screen.
SETTING WITH THE Map KEY
When the stored avoid area is selected, the
avoid area can be adjusted or deleted.
Press the SETTING button.
INV1091
2. The display shows the [NAVIGATION SETTINGS] screen.
INV1098
3. Please refer to “Making the system guide
the route with detailed options” on page
5-27.
If the route guidance is not set, the display
shows the current vehicle location.
Select the Avoid Area Setting key.
INV0909
Adjusting the stored avoid areas
1. Select the Navigation key.
8-7
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AVOID AREA FEATURE?
The display shows the keys on the right of
the screen.
Select the Set key.
INFO:
INV1104
3. The display shows the [AVOID AREA SETTINGS] screen.
INV1105
4. Use the joystick to adjust the location.
Select the Map key of stored avoid areas.
O If you want to avoid the freeway in that area,
key to turn on the green inselect the
dicator on the key. (Indicator ON: avoid,
OFF: do not avoid)
O When altering the size of avoid area, select
the Area key. The area size is increased
or decreased by three scales.
INV1106
5. Press the PUSH ENTER button.
8-8
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AVOID AREA FEATURE?
INV1107
INV1098
6. The avoid area is set, and the grid is displayed on the screen.
7. Please refer to “Making the system guide
the route with detailed options” on page
5-27.
If the route guidance is set, the display shows
the [AVOID AREA SETTINGS] screen.
If the route guidance is not set, the display
shows the current vehicle location.
INV1108
Deleting the stored avoid areas
1. Select the Delete key on the screen
shown in step 5 under “Adjusting the stored
avoid areas”.
8-9
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AVOID AREA FEATURE?
INV1109
2. Select the Yes key.
The avoid area is deleted.
If the route guidance is set, the display shows
the [AVOID AREA SETTINGS] screen.
INV1098
3. Please refer to “Making the system guide
the route with detailed options” on page
5-27.
If the route guidance is not set, the display
shows the current vehicle location.
INFO:
When the No key is selected, the avoid area
will not be deleted, and the screen returns to
the previous one.
8-10
Z 01.12.14/V35 (NAVI) X
9
HOW DO I USE THE AUTOMATIC REROUTING FEATURE?
Re-routing when the vehicle is off the
suggested route........................................... 9-2
Automatic re-routing .............................. 9-2
Detouring from the route temporarily ....... 9-3
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AUTOMATIC REROUTING FEATURE?
RE-ROUTING WHEN THE
VEHICLE IS OFF THE SUGGESTED ROUTE
3. The display shows the [NAVIGATION SETTINGS] screen.
Select the Auto Re-route On/Off key.
When you have strayed from the suggested
route during the route guidance, you can request a re-route from the current location using
the automatic re-routing function.
AUTOMATIC RE-ROUTING
This setting will re-route automatically even if
the driver turns off the suggested road. The
auto re-route will bring the vehicle to the destination. You will have to set the system for automatic re-routing.
INV0909
2. Select the Navigation key.
INV1075
4. When turning on/off the auto reroute, select
the On or Off key.
When the PUSH ENTER button is pressed,
the selected key will be illuminated.
1. Press the SETTING button.
5. Press the MAP button.
INV1110
The map screen will re-appear, and the system
will start route calculation automatically.
9-2
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AUTOMATIC REROUTING FEATURE?
INFO:
O When optional routes are not found, the
original route will be displayed.
O When the vehicle runs off the suggested
route with the automatic re-routing function
activated, route re-calculation will be attempted so that the vehicle returns to the
original route. However, if the vehicle stays
off the route, the system will calculate a new
route.
INV1112
2. Select the Edit Route key.
INV1114
4. Set distance for detour calculation.
DETOURING FROM THE
ROUTE TEMPORARILY
The system will look for a detour according to
the distance set from the current location.
If you encounter a traffic jam, you can ask the
system to calculate a detour with the pre-set
distance.
INFO:
NOTE:
The detour feature is only available
when a destination has been set.
1. Press the ROUTE button.
INV1113
3. Select the Detour key.
O When the Avoid the Current Street key
is selected, a detour route to approximately
20 miles (30 km) will be calculated if the
distance to the next guide point intersection
exceeds 20 miles (30 km).
O If an alternative route cannot be found, the
9-3
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE AUTOMATIC REROUTING FEATURE?
previous route before calculation will be
displayed.
O If the vehicle is traveling at high speed, the
suggested detour may start from the point
the vehicle has already passed.
9-4
Z 01.12.14/V35 (NAVI) X
10
HOW DO I USE THE VOICE GUIDANCE FEATURE?
About voice guidance ............................... 10-2
Basics of voice guidance...................... 10-2
Adjusting the guide volume ................. 10-2
Directions given and the distance to the
road points ........................................... 10-3
Notification of an intersection on an
ordinary road........................................ 10-3
Notification of consecutive intersections on
an ordinary road................................... 10-3
Notification of an entrance to a
freeway................................................. 10-3
Notification of a freeway junction........ 10-3
Notification of an exit from a
freeway................................................. 10-3
Requesting current voice information ...... 10-3
Notes on the voice guidance..................... 10-4
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE VOICE GUIDANCE FEATURE?
ABOUT VOICE GUIDANCE
WARNING
To operate the navigation system or
to use the screen functions, first park
the vehicle in a safe place and set the
parking brake. Using the system
while driving can distract the driver
and may result in a serious accident.
BASICS OF VOICE GUIDANCE
The voice guidance will verbally tell you which
direction to turn when the vehicle approaches
the intersection in which you have to make a
turn to reach the destination.
NOTE:
Directional guidance provided by the
navigation system does not take carpool
lane driving into consideration, especially when carpool lanes are separated
from other road lanes.
O There may be some cases in which
the voice guidance and the actual
road conditions do not correspond.
This may occur because of discrepancies between the actual road and
the information on the DVD or due to
the vehicle’s speed.
O In case the content of the voice guidance does not match the actual road
conditions, follow the information
obtained from traffic signs or notices
on the road.
ADJUSTING THE GUIDE VOLUME
INV1117
1. Press the SETTING button on the control
panel.
2. When turning on/off the voice guidance,
push the PUSH ENTER button. When the
Guidance Volume key is illuminated
with a green indicator, it is activated. When
turning up/down the voice guidance, touch
the Louder or Softer key. The voice
will become louder/softer.
10-2
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE VOICE GUIDANCE FEATURE?
DIRECTIONS GIVEN AND THE
DISTANCE TO THE ROAD
POINTS
Depending on the road types, the direction will
differ.
INFO:
Depending on the vehicle speed, the distance
may vary.
NOTIFICATION OF AN INTERSECTION ON AN ORDINARY
ROAD
“In a half mile, right (left) turn.”
“In a quarter mile, right (left) turn.”
“Right (left) turn ahead.”
NOTIFICATION OF CONSECUTIVE INTERSECTIONS ON AN
ORDINARY ROAD
“In a half mile, right (left) turn.”
“In a quarter mile, right (left) turn, then left
(right) turn.”
direction), then in quarter of a mile keep to the
left (right) onto (road number and direction).”
“Right (left) turn ahead, then left (right) turn.”
“Keep to the left (right) onto (road number and
direction).”
NOTIFICATION OF AN ENTRANCE TO A FREEWAY
“In a half mile, freeway entrance on your right
onto (road number and direction).”
“In a quarter mile freeway entrance on your
right onto (road number and direction).”
“Freeway entrance on your right onto (road
number and direction).”
NOTIFICATION OF AN EXIT
FROM A FREEWAY
“In a half mile, exit on your right.”
“Take the second exit on your right.”
REQUESTING CURRENT
VOICE INFORMATION
NOTIFICATION OF A FREEWAY
JUNCTION
“In about two miles, keep to the right (left) onto
(road number and direction).”
“In about one mile, keep to the right (left) onto
(road number and direction), then in quarter
keep to the left (right).”
INV1118
“Keep to the right (left) onto (road number and
10-3
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE VOICE GUIDANCE FEATURE?
This is available during route guidance, from
the time after the route calculation is completed
until the vehicle arrives at the destination.
Press the VOICE button.
The current condition will be announced.
INFO:
O If you press the VOICE button when you
are off the suggested route and when the
automatic re-route function is off, the voice
will announce: “Proceed to the highlighted
route.”
on the map display and follow the actual
road and all traffic regulations.
accurately correspond with the voice guidance.
O The voice guidance is activated only for
junctions with certain conditions. In some
cases you may need to turn, even if there
is no voice guidance.
O The displayed street names may sometimes
differ from the actual names or “UNKNOWN
STREET NAME” may be displayed.
O The content of the voice guidance may vary,
depending on the direction of the turn and
the type of junction with other roads.
O The route guidance will be activated at various times depending on the situation.
O If you press the VOICE button when you
are going in the wrong direction, the voice
will announce: “Please make a legal U-turn
if possible.”
O When the vehicle is off the suggested route,
route guidance is not available. The system
will not inform you of this; please refer to
the map display and request rerouting.
NOTES ON THE VOICE
GUIDANCE
O At freeway junctions, the road numbers and
directions may not accurately correspond
with the voice guidance.
O The voice guidance in this system should
be regarded as a supplementary function.
When driving your vehicle, check the route
O At freeway exits, the street names may not
Please refer to “Automatic re-routing” on page
9-2.
O When the green indicator on the
Guidance Volume key is not illuminated,
the voice guidance is not available.
O The voice guidance will start when the vehicle enters the suggested route. Before entering the route, refer to the map display for
the direction.
O When the vehicle approaches a waypoint,
the voice will say, “You have arrived at
waypoint 1 (2, 3, 4,...).” The guidance will
switch to the next route section. While the
voice guidance is not available, please refer
to the map display for the direction.
10-4
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE VOICE GUIDANCE FEATURE?
O When the vehicle approaches a destination,
the voice will say, “You have arrived at your
destination. Ending route guidance.” For
the remainder of the way, please find your
direction on the map display.
O In some cases, the voice guidance ends before arrival at the destination. In such cases,
drive the vehicle by referring to the destination icon displayed on the map screen.
O When the system can judge on which side
the destination (waypoint) is located, the
voice guidance will say “on the right” after
announcing the arrival at the destination.
O Voice guidance may not operate as specified or may not operate at all due to the
angle of roads at intersection entrances and
exits.
10-5
Z 01.12.14/V35 (NAVI) X
Z 01.12.14/V35 (NAVI) X
11
Screen information — Planview
display ....................................................... 11-2
Screen information — BirdviewTM
display ....................................................... 11-2
Switching between BirdviewTM and Planview displays........................................ 11-3
Zooming in and out of the map ................ 11-6
Changing the display direction (in Planview
display) ...................................................... 11-7
Scrolling the map ...................................... 11-8
Displaying the complete route to the
destination ................................................. 11-9
Displaying turn list .................................. 11-10
Requesting the simulation drive to the
destination ............................................... 11-11
Cancel simulation ............................... 11-12
Displaying the track................................. 11-12
GPS information display ......................... 11-13
Updating the current vehicle location and the
direction .................................................. 11-14
HOW DO I ADJUST THE DISPLAY?
Setting automatic beep sound.................
Setting the display mode.........................
Adjusting the display brightness........
Adjusting the display contrast............
Switching the display color................
How to use the D/N button.............
Display off ..........................................
Setting display duration .....................
Setting the clock......................................
Adjusting the time ..............................
Setting daylight saving time...............
Adjusting the time to the GPS ...........
Selecting the time zone ....................
How to handle the display ......................
Characteristics of liquid crystal
display ................................................
Maintenance of the display ................
11-16
11-17
11-17
11-18
11-19
11-19
11-20
11-21
11-21
11-22
11-22
11-22
11-23
11-23
11-23
11-24
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
SCREEN INFORMATION —
PLANVIEW DISPLAY
Vehicle icon:
This icon indicates your vehicle and the direction of travel.
SCREEN INFORMATION —
BirdviewTM DISPLAY
GPS indicator:
This will tell you the strength of the GPS signal
received.
Please refer to “Accuracy of positioning” on
page 2-2.
:
INV1119
Direction key:
This indicates and sets the direction of the map
on the display.
Please refer to “Changing the display direction
(in Planview display)” on page 11-7.
Map scale:
This will indicate the approximate distance of
route and traveling time to the destination. This
indicator will appear when you set the destination with the route guidance ON.
:
Press the MAP or PREVIOUS button to
show the enlarged intersection display.
INV1120
Map scale:
This display indicates the scale on the current
map.
By using the ZOOM IN / ZOOM OUT buttons, you can change the scale of the map.
Height and distance on BirdviewTM display is
shown in the table on page 11-3.
This display indicates the scale on the current
map.
11-2
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
SWITCHING BETWEEN BirdviewTM and PLANVIEW DISPLAYS
Height of view
Distance
between grids
Depth of distance
512,000 feet
(160,000 m)
160 miles
(256 km)
approx. 2,240
miles
(approx. 1,792 km)
128,000 feet
(40,000 m)
40 miles
(64 km)
approx. 560 miles
(approx. 896 km)
64,000 feet
(20,000 m)
20 miles
(32 km)
approx. 280 miles
(approx. 448 km)
32,000 feet
(10,000 m)
10 miles
(16 km)
approx. 140 miles
(approx. 224 km)
16,000 feet
(4,800 m)
4.0 miles
(8 km)
approx. 70 miles
(approx. 112 km)
INV1121
8,000 feet
(2,400 m)
2.0 miles
(4 km)
approx. 35 miles
(approx. 56 km)
<Example> Height of view: 1,000 feet (300 m)
4,000 feet
(1,200 m)
1.0 mile
(2 km)
approx. 17-1/2
miles
(approx. 28 km)
2,000 feet
(600 m)
1/2 mile
(1 km)
approx. 8-3/4
miles
(approx. 14 km)
1,000 feet
(300 m)
1/4 mile
(500 m)
approx. 4-3/8
miles
(approx. 7 km)
BirdviewTM screen displays the view from
above, looking down toward the direction the
vehicle is traveling. This combines the detailed
display close to the vehicle and the long distance view in one screen.
INV1123
INV1122
<Example> Height of view: 16,000 feet
(4,800 m)
11-3
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
INV1124
INV0909
2. Select the Navigation key.
INI0036
To change between the BirdviewTM and
Planview, proceed as follows:
1. Press the SETTING button.
11-4
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
O It always appears with the current forward
direction up.
O When the system is re-drawing the display
in BirdviewTM display, the distance the vehicle travels becomes longer, and/or the
degree the vehicle turns becomes larger
than in the Planview display in order to
complete re-drawing.
INV0910
INV1125
3. The display shows the [NAVIGATION SETTINGS] screen.
4. Select the Birdview or Planview key.
Select the View key.
INFO:
Some locations or buildings may be labeled
differently in Planview display and BirdviewTM
display.
About BirdviewTM display
O The names of the roads and locations may
differ, depending on where the name appear
on the screen.
O In order to avoid having too much detail on
the map, all road names are not always
shown on the screen. When the display redraws the map, a road name which is shown
on the previous screen may not appear on
the new screen.
The destination (waypoints) cannot be set in
BirdviewTM display using the map method.
Set them in Planview display.
11-5
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
ZOOMING IN AND OUT OF
THE MAP
Use the ZOOM IN / ZOOM OUT buttons
to change the scale of the display and height
view.
Nine map scales are available from the most
detailed (1 : 10,000) to the widest view (1 :
20.48 million).
Each time the ZOOM IN button is pressed,
the map scale will change one level to display
a more detailed map.
Scale level on the Planview display
Map scale
1 : 20.48 million
1 : 5.12 million
1 : 1.28 million
1 : 320,000
1 : 160,000
1 : 80,000
1 : 40,000
1 : 20,000
1 : 10,000
Actual distance
160 miles (256 km)
40 miles (64 km)
10 miles (16 km)
2.5 miles (4 km)
1 mile (2 km)
1/2 mile (1 km)
1/4 mile (500 m)
1/8 mile (200 m)
1/16 mile (100 m)
Scales on the BirdviewTM are listed on page
11-3.
INV1126
<Example> Most detailed level (1: 10,000)
Each time the ZOOM OUT
button is
pressed, the map scale will change one level
to display a map that shows a wider area.
The chosen map scale will be displayed on the
left side of the screen.
INFO:
By pressing the button repeatedly, you can skip
the levels to reach the map of desired scale.
INV1127
<Example> The widest level (1: 20.48 million)
11-6
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
CHANGING THE DISPLAY
DIRECTION (IN PLANVIEW
DISPLAY)
1. Press the SETTING button.
INV1128
INV0909
2. Select the Navigation key on the [SETTINGS] screen.
INV1129
3. Select the Heading key on the [NAVIGATION SETTINGS] screen.
4. Select the Heading Up
North Up key.
key or the
The [HEADING] screen will be displayed.
The map is displayed as follows:
Heading Up : The map shows the current
forward direction up.
North Up : The map shows North up.
11-7
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
<Display with North up>
INFO:
O When the key is selected, the green indicator light will light up.
O When the MAP button is pressed after the
display setting, the [CURRENT LOCATION]
screen will appear.
When the PREVIOUS button is pressed,
the previous screen will reappear.
INV1130
<Display with the forward direction up>
INV1132
SCROLLING THE MAP
1. Operating the joystick.
You can manually scroll the map to check the
location of your choice.
The map scrolls in the same direction as the
joystick movement.
INFO:
While the vehicle is traveling, a single operation will move within the displayed area of the
screen.
2. Press the MAP button to go back and
show the current vehicle position.
INV1131
11-8
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
INFO:
You can also select the PREVIOUS button to
go back.
DISPLAYING THE COMPLETE ROUTE TO THE DESTINATION
INV1135
2. Select the Route Info key.
3. Select the Complete Route key.
INV1134
INV1133
You can request to display the complete suggested route to the destination.
1. Press the ROUTE button.
Keys will be displayed on the screen.
11-9
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
DISPLAYING TURN LIST
INV1136
The complete suggested route to the destination will be displayed.
INV1137
INV1134
3. Select the Turn List key.
You can display the list of guide points to the
destination during route calculation.
1. Press the ROUTE button.
2. Select the Route Info key.
INV1138
A list of destinations, waypoints and guide
11-10
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
points will be displayed. Guidance will be
made at each guide point which direction to
turn.
REQUESTING THE SIMULATION DRIVE TO THE DESTINATION
The distance between the guide points and the
travel time will also be displayed.
You can simulate driving the entire suggested
route to the destination on the screen.
It may take time to prepare the turn list. In such
cases, the Turn List key will be highlighted
and you can not select it until calculation is
completed.
1. Press the ROUTE button.
Keys will be displayed on the screen.
INV1139
3. Select the Route Simulation key.
INFO:
O In the turn list, turning points more than 60
miles (100 km) away from the current vehicle location will not be displayed.
O When calculated routes include a freeway,
information about freeway entrances and
exits will also be displayed.
INV1134
2. Select the Route Info key.
INV1140
The screen will display a simulated drive with
11-11
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
voice guidance on the suggested route to the
destination.
paused. If you select the key again, the simulation will restart.
4. When the CANCEL or DEST button is
pressed, or the vehicle starts to run, the
route simulation will be canceled.
DISPLAYING THE TRACK
You can have the system track the road you
have taken, and display it with indication marks
or locus indicators (V).
1. Press the SETTING button.
INV1142
2. The [ROUTE INFO.] screen will be displayed.
Select the Cancel Simulation key.
INV1141
CANCEL SIMULATION
1. Press the ROUTE button during simulation.
Select the Route Info key.
INFO:
When the CANCEL or DEST button is
pressed, or the vehicle starts to run, the route
simulation will be canceled.
INFO:
If you select the Pause key, simulation is
INV0909
2. Select the Navigation key on the [SETTINGS] screen.
11-12
Z 02.7.18/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
GPS INFORMATION DISPLAY
The following GPS information will be displayed on the screen: latitude, longitude, altitude, signal reception, and satellite locations.
1. Press the SETTING button.
INV1143
3. Select the Tracking On/Off key.
INV1145
5. Press the MAP button.
The location of the vehicle will be displayed.
INFO:
O You can select the On key to display the
locus indicator (V), and the Off key to
get rid of it.
O The locus indicator (V) may be spaced differently, according to the scale of the map.
INV1144
4. Select the On key.
INV0909
2. Select the Navigation key on the [SETTINGS] screen.
O If you reset the current vehicle location, the
locus indicator (V) will be cleared.
11-13
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
the [NAVIGATION SETTINGS] screen will
appear.
UPDATING THE CURRENT
VEHICLE LOCATION AND
THE DIRECTION
INV1146
INV1147
3. Select the GPS Information key.
INFO:
GPS information will be displayed.
O The satellite with a strong enough signal
will be indicated in green.
If the vehicle icon does not indicate the correct
location or the direction does not match the actual road, you can adjust them on the map
screen.
1. Press the SETTING button.
O The display will read, [3-dimensional positioning], [2-dimensional positioning], or
[positioning not possible], depending on
the signal strength. (Altitude will not be displayed in 2-dimensional positioning.)
O When the MAP button is pressed, the
[CURRENT LOCATION] screen will appear.
When the PREVIOUS button is pressed,
INV0909
11-14
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
2. Select the Navigation key on the
[SETTINGS] screen.
INV1149
INV1148
3. Select the Adjust Current Location key
on the [NAVIGATION SETTINGS] screen.
4. Align the correct location to the cross point
on the map using the joystick, and select
the Set key. The current location will be
corrected, and the direction adjustment
screen will appear.
INV1150
5. Adjust the direction using the
key.
and
The arrow on the display shows the direction
of the vehicle icon.
6. Select the Set key.
11-15
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
not go back to the right road after traveling
approximately 6-1/4 miles (10 km), update
the vehicle location.
SETTING AUTOMATIC BEEP
SOUND
INV1151
INV1152
INFO:
2. The [NAVIGATION SETTINGS] screen will
be displayed.
O It is not possible to update the vehicle location when the vehicle is moving.
O Depending on the driving conditions, the
vehicle icon may not exactly correspond to
the actual location of the vehicle. To verify
position, refer to map books or check actual
landmarks.
O If you notice that the system is displaying
a different road from the one the vehicle is
actually traveling, and the vehicle icon does
Select the Button Tone/Beep Response key.
INV0909
You can set the automatic beep sound. (Activated during automatic rerouting, etc.)
1. Press the SETTING button.
The [SETTINGS] screen will be displayed.
Select the Navigation key.
11-16
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
SETTING THE DISPLAY
MODE
You can alter the display mode.
ADJUSTING THE DISPLAY
BRIGHTNESS
You can choose the best brightness for the display.
INV1153
INV1155
1. Press the SETTING button.
3. The [BUTTON TONE/BEEP RESPONSE]
screen will be displayed.
3. The [DISPLAY SETTINGS] screen will be
displayed.
Select the Brightness/Contrast/Map Background
key.
When turning on/off the beep sound, select the
On or Off key.
When the PUSH ENTER button is pressed, the
selected key will be illuminated.
INFO:
Press the MAP button to return to the map.
INV1154
2. Select the Display key.
11-17
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
ADJUSTING THE DISPLAY
CONTRAST
You can choose the best contrast for the display.
1. Press the SETTING button.
INV1156
INV1155
4. Select the Brightness key.
3. The [DISPLAY SETTINGS] screen will be
displayed.
Select the Brightness/Contrast/Map Background
key.
When the joystick is tilted to the right, the
screen will brighten, and darken when tilted to
the left.
INFO:
The screen displayed before pressing the
SETTING button will be displayed as a
sample screen on the [DISPLAY SETTINGS]
screen.
INV1154
2. Select the Display key.
11-18
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
displayed.
Select the
key.
INV1157
4. Select the Contrast key.
Brightness/Contrast/Map Background
INV1154
2. Select the Display key.
When the joystick is tilted to the right, contrast
of the screen will be higher, and will be lower
when tilted to the left.
INV1158
4. Select the Map Background key.
The display brightness will be altered.
SWITCHING THE DISPLAY
COLOR
HOW TO USE THE D/N BUTTON
1. Press the SETTING button.
1. Press the D/N button.
INV1155
3. The [DISPLAY SETTINGS] screen will be
11-19
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
displayed.
Select the Display Off key.
The indicator of the [DISPLAY OFF] will
turn green.
INV1159
2. When the D/N button is pressed, the
screen will repeatedly switch between normal lighting and dimmer lighting independently of turning on or off of illumination.
INV1154
2. Select the Display key.
INV1179
DISPLAY OFF
4. A comment will be displayed for 5 seconds
and the display will turn off.
To restart the display, press the SETTING
button and select the Display Off key
again.
The display can be turned off with the following
procedure.
1. Press the SETTING button.
INV1160
3. The [DISPLAY SETTINGS] screen will be
INFO:
O When the INFO and MAP buttons are
11-20
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
pressed with the display turned off, the
screen shows normally, then the display
turns off again.
The clock should only need to be adjusted if
the vehicle is driven into a new time zone or
for daylight savings time.
O When the D/N button is pressed with the
display turned off, the display brightness is
changed when the screen is re-displayed.
1. Change to the current vehicle location
screen.
2. Select the Setting key.
SETTING DISPLAY DURATION
You can set the confrontation continuance operation time.
1. Press the SETTING button.
INV1161
3. The [DISPLAY SETTINGS] screen will be
displayed.
Select the Setting Display Duration key.
INFO:
When you finish setting the confrontation continuance operation time, the display will return
to the previous display automatically.
SETTING THE CLOCK
INV1154
INV0908
3. Select the Clock key on the [SETTINGS]
screen.
The clock uses the GPS signal to determine the
time.
2. Select the Display key.
11-21
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
ADJUSTING THE TIME
SETTING DAYLIGHT SAVING
TIME
ADJUSTING THE TIME TO THE
GPS
Turn ON or OFF daylight saving time.
INV1162
Select the Hours or Minutes key and tilt
the joystick to the right or left to adjust the time.
The time will change step by step.
INFO:
After completion of the setting, press the
PREVIOUS button.
INV1164
INV1163
1. Every time the Daylight Saving Time key
is selected, the light turns ON and OFF alternately.
1. Select the Auto Adjust key.
The time will be reset to the GPS time.
ON: The displayed time advances by one
hour.
OFF: The current time is displayed.
11-22
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
SELECTING THE TIME ZONE
The GPS time (manual time) corresponding to
the selected zone will be displayed.
INFO:
Pacific zone has been set as the initial (default) setting.
HOW TO HANDLE THE DISPLAY
INV1166
INV1165
1. Select the Select Time Zone key.
The [TIME ZONE] screen will appear.
2. Select one of the following zones depending on the current location.
O
Pacific zone
O
Mountain zone
O
Central zone
O
Eastern zone
O
Atlantic zone
O
Newfoundland zone
After selection, the [CLOCK SETTINGS] screen
will appear.
The display uses liquid crystal and should be
handled with care.
WARNING
Never disassemble the display. It
has some areas with extreme high
voltage. Touching it may result in serious personal injury.
CHARACTERISTICS OF LIQUID
CRYSTAL DISPLAY
O If the temperature inside the vehicle is es11-23
Z 01.12.14/V35 (NAVI) X
HOW DO I ADJUST THE DISPLAY?
pecially low, the display will stay relatively
dim or the movement of the images may be
slow. These conditions are normal; when
the temperature rises, the display will function normally.
O You may notice darker or brighter dots in
the display; this is inherent in monitor displays and is not a malfunction.
O You may also notice a remnant of the previous display image on the screen. This afterimage is inherent in displays and is not
abnormal.
INFO:
The screen may become distorted by strong
magnetic fields.
MAINTENANCE OF THE DISPLAY
CAUTION
O To clean the display, never use a
rough cloth, alcohol, benzine,
thinner, any kind of solvent, or paper towel with chemical cleaning
agent. They will scratch or deteriorate the panel.
O Do not splash any liquid such as
water or car fragrance on the display. Contact with liquid will
cause the system to malfunction.
If you need to clean the display screen, use a
dry soft cloth. If additional cleaning is necessary, use a small amount of neutral detergent
with a soft cloth. Never soak the exterior with
water or detergent.
11-24
Z 02.7.18/V35 (NAVI) X
12
HOW DO I USE THE VEHICLE INFORMATION?
Vehicle information display ....................... 12-2
Trip computer information................... 12-2
Fuel economy information.................... 12-2
Maintenance information...................... 12-3
Route guidance to a fuel station when fuel
is low.................................................... 12-4
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE VEHICLE INFORMATION?
TRIP COMPUTER INFORMATION
VEHICLE INFORMATION
DISPLAY
FUEL ECONOMY INFORMATION
Vehicle information can be displayed. If fuel is
low or the system malfunctions, a warning will
be displayed.
1. Press the INFO button.
INV1167
2. Choose an item using the joystick and
press the PUSH ENTER button.
3. After setting, press the PREVIOUS button
to return to the previous screen.
INV1168
INV1169
1. When the Trip computer key is selected,
the [TRIP COMPUTER INFO.] screen will be
displayed.
1. When the Fuel Economy key is selected,
the [FUEL ECONOMY INFO.] screen will be
displayed.
Elapsed Time, Driving Distance and Average
Speed will also be displayed.
Average fuel economy and distance to empty
will be displayed for reference.
2. To reset, select the RESET key before
driving the vehicle.
2. To reset the Average Fuel Economy, select
the RESET key.
12-2
Z 01.12.14/V35 (NAVI) X
HOW DO I USE THE VEHICLE INFORMATION?
MAINTENANCE INFORMATION
the [MAINTENANCE INFO.] screen will be
displayed.
2. To set the maintenance information for the
Engine Oil, Oil Filter or Tire Rotation (if so
equipped), choose an item using the joystick and press the PUSH ENTER button.
INV1170
3. When the Fuel Economy Record key is
selected, the [ECONOMY INFO.] screen will
be displayed.
INV1756
The average fuel consumption history will be
displayed in graph along with the average for
the previous Reset-to-Reset period.
INV1172
3. The [ENGINE OIL] screen will be displayed.
4. To reset, select the RESET key.
INV1171
1. When the Maintenance key is selected,
5. Set the distance of the maintenance schedule.
To determine the maintenance interval, refer to
vehicle’s Owner’s Manual.
12-3
Z 02.7.30/V35 (NAVI) X
HOW DO I USE THE VEHICLE INFORMATION?
To automatically display the [MAINTENANCE
INFO.] screen when setting trip distance is
reached,
select
the
Display Maintenance Notification key and
press the PUSH ENTER button.
2. The [WARNING] screen will be displayed.
Select the Gas Station key.
ROUTE GUIDANCE TO A FUEL
STATION WHEN FUEL IS LOW
When fuel is low, it is possible to display
routes to the nearest fuel station.
INV1030
1. Press the INFO button.
INV1174
3. The [QUICK STOP] screen will be displayed.
The list of selected facilities with each direction
and distance will be displayed.
Select one of them in the list.
4. Set route priorities, then press the
OK key. The route calculation to the destination will be started.
INFO:
If quick stop is set after the destination was set,
the system will start the route calculation to the
location as the waypoint.
Please refer to “Quick stop” on page 5-36.
INV1173
12-4
Z 02.7.30/V35 (NAVI) X
13
How to order map data DVD-ROM
updates ......................................................
How to handle the DVD-ROM ...................
About the navigation map
DVD-ROM.............................................
Icons ....................................................
Abbreviations definition list.......................
INFORMATION ON MAP DATA DISCS
13-2
13-2
13-3
13-3
13-6
Z 02.7.30/V35 (NAVI) X
INFORMATION ON MAP DATA DISCS
HOW TO ORDER MAP
DATA DVD-ROM UPDATES
HOW TO HANDLE THE
DVD-ROM
using a clean, soft cloth. Do not
wipe the disc using a circular motion.
To order updated mapping DVD-ROMs or additional DVD-ROMs, please contact the
INFINITI NAVIGATION SYSTEM HELP DESK
at:
Do not use a conventional record
cleaner, benzine, thinner or alcohol intended for industrial use.
O ADDRESS: P .O. Box 2082, Burlingame, CA
94011
O E-MAIL: [email protected]
O WEB SITE: www.zenrin.com
SIH0082
O PHONE: (800) 662-6200
O HOURS: 6:00 AM to 4:00 PM (Pacific Time)
CAUTION
O Handle a DVD-ROM by its edges.
Never touch the surface of the
disc.
O To clean a disc, wipe the surface
from the center to the outer edge
O A new disc may be rough on its inner and outer edges. Remove the
rough edges using the side of a
pen or pencil as illustrated.
O Never attempt to use a DVD-ROM
that has been cracked, deformed,
or repaired using adhesive. Doing
so may cause damage to the
equipment.
O Handle the DVD-ROM carefully to avoid
contamination or flaws. Otherwise, signals
may not be read properly.
13-2
Z 01.12.14/V35 (NAVI) X
INFORMATION ON MAP DATA DISCS
O Do not write, draw or attach anything on any
side of the DVD-ROM.
ferent from those at the time you use this
DVD-ROM.
O Do not store the DVD-ROM in locations
with direct sunlight or in high temperatures
or humidity.
2. Traffic control and regulation data used in
this DVD-ROM may be different from those
at the time you use this DVD-ROM due to
the data production timing. When driving
your vehicle, follow the actual traffic control
signs and notices on the roads.
O Always place discs in the storage case when
they are not being used.
O Do not put on any sticker or write anything
on either surface of the DVD-ROM.
ABOUT THE NAVIGATION
MAP DVD-ROM
1. This navigation map DVD-ROM has been
prepared by ZENRIN CO., LTD. under license from Navigation Technologies Corporation. ZENRIN CO., LTD. has added,
processed and digitized data based on the
digital road map data of Navigation Technologies Corporation. Due to the production timing of the map data, some new
roads may not be included in this map data
or some of the names or roads may be dif-
ICONS
Icon legend follows:
3. Reproducing or copying this map software
is strictly prohibited by law.
Published by Nissan North America, Inc.
© 2000 Navigation Technologies. All rights
reserved. “Certain business data provided by
infoUSA.com, Inc. Copyright 2000, All rights
reserved”.
13-3
Z 01.12.14/V35 (NAVI) X
INFORMATION ON MAP DATA DISCS
Legend of the icons used on the map
INV1182
13-4
Z 01.12.14/V35 (NAVI) X
INFORMATION ON MAP DATA DISCS
Legend of the 3-D icons
INV1183
13-5
Z 01.12.14/V35 (NAVI) X
INFORMATION ON MAP DATA DISCS
ABBREVIATIONS DEFINITION LIST
Abbreviation
ACCS
ACRS
ALY
APPR
AVE
BCH
BND
BLF
BLVD
BRG
BRK
BYP
BYWY
CYN
CSWY
CTR
CHSE
CIR
CLFS
CLB
COR
CT
CV
Meaning
ACCESS
ACRES
ALLEY
APPROACH
AVENUE
BEACH
BEND
BLUFF
BOULEVARD
BRIDGE
BROOK
BYPASS
BYWAY
CANYON
CAUSEWAY
CENTER
CHASE
CIRCLE
CLIFFS
CLUB
CORNER
COURT
COVE
CRK
CRES
XING
CURV
DL
DR
EST
EXP
EXPY
EXT
FRY
FLD
FLDS
FLTS
FRD
FWY
GDNS
GTWY
GLN
GRV
HVN
HTS
HWY
HL
CREEK
CRESCENT
CROSSING
CURVE
DALE
DRIVE
ESTATES
EXPRESS
EXPRESSWAY
EXTENSION
FERRY
FIELD
FIELDS
FLATS
FORD
FREEWAY
GARDENS
GATEWAY
GLEN
GROVE
HAVEN
HEIGHTS
HIGHWAY
HILL
HLS
HOLW
JCT
KY
KNL
KNLS
LNDG
LN
LCK
MNR
MDWS
ML
MT
MTN
OPAS
PKWY
PSGE
PNES
PL
PLZ
PT
PROM
RNCH
RDG
HILLS
HOLLOW
JUNCTION
KEY
KNOLL
KNOLLS
LANDING
LANE
LOCK
MANOR
MEADOWS
MILL
MOUNT
MOUNTAIN
OVERPASS
PARKWAY
PASSAGE
PINES
PLACE
PLAZA
POINT
PROMENADE
RANCH
RIDGE
13-6
Z 01.12.14/V35 (NAVI) X
INFORMATION ON MAP DATA DISCS
Abbreviation
RD
SHRS
SPGS
SQ
ST
SUBD
SMT
TER
TRCE
TRAK
TRL
TUNL
TPKE
VLY
VIA
VW
VLG
VIS
Meaning
ROAD
SHORES
SPRINGS
SQUARE
STREET
SUBDIVISION
SUMMIT
TERRACE
TRACE
TRACK
TRAIL
TUNNEL
TURNPIKE
VALLEY
VIADUCT
VIEW
VILLAGE
VISTA
13-7
Z 01.12.14/V35 (NAVI) X
Z 01.12.14/V35 (NAVI) X
14
TROUBLESHOOTING GUIDE
Customer assistance ................................. 14-2
Basic operations ........................................ 14-3
Vehicle icon ............................................... 14-4
Map DVD-ROM .......................................... 14-6
Destination, waypoints or menu contents cannot be chosen or set ................................. 14-6
Voice guidance .......................................... 14-8
Route calculation....................................... 14-9
Z 01.12.14/V35 (NAVI) X
TROUBLESHOOTING GUIDE
CUSTOMER ASSISTANCE
For assistance or inquiries about the Infiniti
Navigation System, please contact:
The Infiniti Navigation Helpdesk at 800-6626200 or visit the Infiniti website at
www.infiniti.com.
14-2
Z 01.12.14/V35 (NAVI) X
TROUBLESHOOTING GUIDE
BASIC OPERATIONS
Symptom
Possible cause
Remedy
No image comes on.
The brightness adjustment is at the lowest setting.
Adjust it brighter.
No map comes on the screen.
No map DVD-ROM is inserted, or it is inserted
upside down.
Insert the DVD-ROM correctly.
The map display mode is switched off.
Press the MAP button.
No voice guide is available.
or
The volume is not high enough.
The volume is not set correctly or turned off.
Adjust the volume correctly.
The screen is too dim. The movement is slow.
The temperature in the vehicle is low.
Wait for the temperature to rise.
There are darker or brighter dots in the display. It is inherent to displays. This condition is char- This condition is not abnormal.
acteristics of liquid crystal displays.
O Stored location in the address book and other memory functions may be lost if the car’s battery is disconnected or becomes discharged for a long
time.
If this should occur, service the car’s battery as necessary and re-enter the address book information.
14-3
Z 01.12.14/V35 (NAVI) X
TROUBLESHOOTING GUIDE
VEHICLE ICON
Symptom
Possible cause
Remedy
The location names differ, between Planview
and BirdviewT.
This is because the displayed information is
reduced so that the screen does not become
too crowded. There is also a chance that
names of the roads or locations will be repeatedly displayed. The name appearing on the
screen may be different because of the processing procedure.
The vehicle icon is not shown correctly.
The vehicle might have moved with the ignition Drive the vehicle with GPS on for some disoff, for example on a ferry boat or car transtance.
porter.
The screen does not switch to night screen
even after turning the headlights on.
The last setting is the daytime screen, when
the lights were last turned on.
It should not be regarded as abnormal.
Turn the headlights on again, go to [DISPLAY
SETTINGS] screen and set it to the night
screen.
The map does not scroll even when the vehicle The display is not switched to the map screen.
is traveling.
Press the MAP button.
The vehicle icon does not show up.
The display is not switched to the map screen.
Press the MAP button.
GPS indicator on the screen remains gray.
GPS signals are not received because the vehicle is indoors or in the shade of buildings.
Move the vehicle to outdoors with a clear view
of the sky.
GPS signals are not received because some
objects are placed on the instrumental panel.
Remove the objects from the instrumental
panel.
GPS satellites are in poor locations.
Please wait for the satellites to move to better
locations.
14-4
Z 01.12.14/V35 (NAVI) X
TROUBLESHOOTING GUIDE
VEHICLE ICON
Symptom
Possible cause
The location of vehicle icon does not match the Driving on slippery road surface
actual position.
Driving on slanted area
Remedy
If the position marker does not move to the
correct position even after the vehicle has
been driven approximately 6 miles (10 km),
adjust the current location. If necessary, adjust
the moving speed of the vehicle.
Rough or violent driving
If the position marker does not move to the
correct position even after the vehicle has
been driven approximately 6 miles (10 km),
adjust the current location.
GPS indicator remains gray.
Please check the GPS indicator on the screen
to see if it remains gray. If it remains gray,
drive the vehicle to a place where the GPS can
be received.
Because the vehicle has tire chains on, or the
system was transferred to a different vehicle,
errors (gain or loss) result in calculating the
speed from the speed pulse.
The location of the vehicle icon will move by
driving the vehicle for 30 minutes (in case it is
running at 18-3/4 miles/hour (30 km/h)). If you
still notice errors, adjust moving speed.
The map data has an error or is incomplete (if
the location error always happens in the same
area).
Please wait for the update of the Map DVDROM.
14-5
Z 01.12.14/V35 (NAVI) X
TROUBLESHOOTING GUIDE
MAP DVD-ROM
Symptom
The message “Error” appears after operation.
Possible cause
Map DVD-ROM is soiled or partially damaged.
Remedy
Check the DVD-ROM and wipe it clean with a
soft cloth, following cautions and instructions
on page 13-2.
If you see any damage, replace the DVDROM.
DESTINATION, WAYPOINTS OR MENU CONTENTS CANNOT BE CHOSEN OR SET
Symptom
Turn list is not displayed.
In rerouting, the waypoints are not included in
the calculation.
Possible cause
Remedy
Route search does not occur.
Set designation areas and perform route
search.
Car marker does not appear on recommended
route.
Drive on the recommended route.
Route guide is OFF.
Turn the route guide ON.
The system has judged that the vehicle has
already passed the point to be chosen or set.
If you want to go to that point again, edit the
route again.
14-6
Z 01.12.14/V35 (NAVI) X
TROUBLESHOOTING GUIDE
DESTINATION, WAYPOINTS OR MENU CONTENTS CANNOT BE CHOSEN OR SET
Symptom
Route information is not displayed.
Possible cause
Route calculation has not yet been requested.
Remedy
Set the destination and request route calculation.
The vehicle icon is not on the suggested route. Please drive the vehicle along the suggested
route.
Route guidance is off.
Turn the route guidance on.
Route is not calculated automatically.
The vehicle is not running on a route from
which calculation can occur.
Enter a route from which calculation can occur
from. Alternatively, you can calculate the route
manually. In this case, the entire route will be
calculated again.
It is impossible to request a detour.
Your vehicle is not running on the suggested
route.
Restart route calculation or enter the suggested route.
The detour found is the same as the previous
suggestion.
The system took many conditions into consideration, but the same result was obtained.
This condition is not abnormal.
It is impossible to set the waypoints.
The number of waypoints exceeds 5.
It is impossible to set more than 5 waypoints.
Please decrease the number of the waypoints.
Some items in the menu cannot be selected.
The vehicle is moving.
Park the vehicle in a safe place and select the
desired items to the suggested route.
14-7
Z 01.12.14/V35 (NAVI) X
TROUBLESHOOTING GUIDE
VOICE GUIDANCE
Symptom
The voice guidance is not available.
Possible cause
Voice guidance is only available at certain in-
Remedy
This condition is not abnormal.
tersections marked with . In some cases, the
guidance is not available even when the vehicle should make a turn.
The guidance content does not correspond to
the actual condition.
The vehicle is off the suggested route.
Go back to the suggested route or request
route calculation again.
Voice guidance is set OFF.
Turn the voice guidance ON.
Route guidance is set OFF.
Turn the route guidance ON.
The content of the voice guidance may vary,
depending on the types of junctions to make
turns on.
Follow the actual rules and regulations you are
driving on.
14-8
Z 01.12.14/V35 (NAVI) X
TROUBLESHOOTING GUIDE
ROUTE CALCULATION
Symptom
Possible cause
Remedy
Although the system is set with the moving direction as the preference, it does not find the
route by matching the preference.
There is no route found in that direction.
Route is not indicated.
There is no road that can be found by this sys- Reset the destination closer to the road distem close to the destination.
played in orange. Especially with roads which
have separate lanes for opposite directions, be
careful in setting the destination or waypoints
on it, because results may differ depending on
the lane you choose.
This condition is not abnormal.
The starting point to the destination is too
close.
Set more distant destinations.
The present location is about 1,100 miles
(1,770 km) away from the destination.
Set the destination to within 1,100 miles (1,770
km).
The route is not displayed continuously at
waypoints, for example, that are not calculated
route from the vehicle’s current position.
Suggested routes may be displayed discontinu- This condition is not abnormal.
ously near waypoints as route calculation is
done at each waypoint.
The suggested route the vehicle has traveled
is erased.
Suggested routes are stored in memory by the
blocks; if the vehicle travels past waypoint
block 1, the previous data will be erased.
This condition is not abnormal.
14-9
Z 01.12.14/V35 (NAVI) X
TROUBLESHOOTING GUIDE
ROUTE CALCULATION
Symptom
Possible cause
Remedy
A route with many detours is suggested.
If there are restrictions (such as one-way trafTry slightly moving the starting point or destific) on roads close to the starting point or desti- nation.
nation, the system may suggest a detoured
route.
The landmark description does not correspond
to the actual one.
This may be caused by insufficient or incorrect
data on the DVD-ROM.
Exchange the Map DVD-ROM. The new DVDROM will be updated.
The suggested route does not exactly connect
to the starting point, waypoints, or destination.
There is no data for route calculation closer to
these points.
Set these points on the main road displayed in
thick orange. Please note that in some cases
even main roads lack the data for route calculation.
14-10
Z 01.12.14/V35 (NAVI) X
15
INDEX
Destination (Setting) ..................................................... 5-2
Icon (Legend).......................................... 7-10, 13-4, 13-5
Detour ........................................................................... 9-3
Information on screen (Planview/BirdviewTM) ............ 11-2
Address book (Editing)................................................. 7-6
Display (Direction)...................................................... 11-7
Intersection.................................................................. 5-12
Address book (Setting)................................................. 7-2
Display (Error) ............................................................ 4-23
Address/Street ............................................................... 5-6
Display (Maintenance) .............................................. 11-23
Automatic re-routing..................................................... 9-2
Display (Setting) ....................................................... 11-17
A
Avoid areas (Editing) .................................................... 8-5
Avoid areas (Setting) .................................................... 8-2
E
B
Enlarged intersection display...................................... 5-31
BirdviewTM display...................................................... 11-2
G
C
GPS (Global Positioning System) ................................ 2-2
GPS information ....................................................... 11-13
Clear memory.............................................................. 4-19
Clock ......................................................................... 11-21
H
Complete route ........................................................... 11-9
Heading ....................................................................... 11-7
J
Joystick ......................................................................... 4-6
L
Liquid crystal display (LCD) .................................... 11-23
M
Map DVD-ROM................................................. 13-2, 14-6
Map coverage areas...................................................... 2-4
N
Nearby display icons .................................................. 6-13
D
I
P
Destination (Adjusting) ............................................... 5-32
Destination (Deleting) ................................................. 5-32
Icon (Changing)............................................................ 7-7
Point of Interest (POI) .................................................. 6-2
Z 01.12.14/V35 (NAVI) X
INDEX
Preferences for route calculation................................ 5-29
T
Z
Tracking .................................................................... 11-12
Zoom in (IN) ............................................................... 11-6
Troubleshooting.......................................................... 14-1
Zoom out (OUT) ......................................................... 11-6
Previous Dest. ............................................................. 5-5
Q
Turn list .................................................................... 11-10
Quick stop................................................................... 5-36
Quick stop customer settings..................................... 5-37
R
U
Updating the current vehicle location and the
direction .................................................................... 11-14
Reference symbols........................................................ 1-2
Route calculation and guidance ................................. 5-31
V
Route guidance ........................................................... 4-21
Voice guidance ........................................................... 10-2
S
Voice guidance (Notes) .............................................. 10-4
Safe operation ............................................................... 1-2
W
Safety note .................................................................... 1-2
Scrolling the map ....................................................... 11-8
Waypoint (Adjusting) .................................................. 5-32
Setup start-up screen ................................................. 4-16
Waypoint (Deleting) .................................................... 5-32
Simulation drive........................................................ 11-11
Waypoint (Setting) ...................................................... 5-28
Storing current vehicle position ................................... 7-3
Where am I? ............................................................... 5-39
15-2
Z 01.12.14/V35 (NAVI) X
KEY
Clock key .......................................... 11-21
Intersection key ................................... 5-12
Address Book key ................................. 5-3
Complete route key............................. 11-9
Landmark Icon key................................ 7-8
Address/Street key ................................ 5-6
Country key......................................... 5-25
Language/Unit key ................................ 4-9
Adjust Current Location key ............. 11-14
Destination key.................................... 5-27
Louder key .......................................... 10-2
All Clear key ....................................... 5-35
Display key........................................ 11-17
Map key .............................................. 5-24
Area key ........................................ 8-4, 8-8
Display Off key.................................. 11-20
Minimize FWY key.............................. 5-30
Auto Re-route On/Off key ..................... 9-2
key ..................................... 5-28
Minimize Toll Road key...................... 5-30
Avoid Area Settings key........................ 8-2
Detour key............................................. 9-3
Navigation key....................................... 4-9
Avoid the Current Street key ................ 9-3
Edit Address Book key.......................... 7-2
Nearby key .......................................... 6-11
Avoid Freeway key ........................ 8-4, 8-8
Edit Route key....................................... 9-3
Nearby Display Icons key ................... 6-13
key ... 11-17
GPS information key......................... 11-13
North Up key....................................... 11-7
Button Tone/Beep Response ........... 11-16
Guidance Volume key ......................... 10-2
Pause key.......................................... 11-12
Category key ......................................... 6-4
Heading key ........................................ 11-7
Phone Number key ............................. 5-22
Cancel Simulation key ...................... 11-12
Heading Up key .................................. 11-7
Point of Interest (POI) key.................... 6-2
City key (DEST. SETTINGS)............... 5-18
Home key ............................................ 5-26
Previous Dest. key ................................ 5-5
Clear Memory key............................... 4-19
I AGREE key........................................ 4-16
Priorities key ....................................... 5-29
Brightness/Contrast/Map Background
15-3
Z 01.12.14/V35 (NAVI) X
Quick Stop key.................................... 5-36
Tracking On/Off key.......................... 11-12
PREVIOUS ............................................. 4-6
Quick Stop Customer Settings key..... 5-37
Turn List key..................................... 11-10
ROUTE ................................................. 4-13
Rename key................................... 7-7, 8-6
Use Ferry Route key ........................... 5-30
SETTING ................................................ 4-8
Return All Settings to Default
key..... 4-21
Use Time Restricted Roads key.......... 5-30
VOICE .................................................. 10-4
Route Calc. key................................... 5-31
View key.............................................. 11-3
ZOOM IN ............................................. 11-6
Route Info key..................................... 4-13
Waypoint key....................................... 5-29
ZOOM OUT ......................................... 11-6
Route Simulation key........................ 11-11
key...................................... 5-28
..................................................... 4-15
Save Current Location key.................... 7-3
Where am I? key................................. 5-39
Set Average Speed for Estimated Journey Time
/
key........................................................... 4-20
BUTTON
key ................................. 11-15
Setting Display Duration key ............ 11-21
CANCEL ................................................ 4-6
Short Menus key................................... 3-4
DEST ................................................... 4-11
Shortest Distance key ......................... 5-30
D/N .................................................... 11-19
Shortest Time key ............................... 5-30
INFO .................................................... 12-2
Softer key ............................................ 10-2
Joystick and PUSH ENTER....................... 4-6
Store Place key ..................................... 7-3
MAP .................................................... 5-32
15-4
Z 01.12.14/V35 (NAVI) X
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement