Sony CDP-CE375 CD Player Owner's Manual

Add to My manuals
16 Pages

advertisement

Sony CDP-CE375 CD Player Owner's Manual | Manualzz

SONY,

Compact Disc

Player

Operating Instructions

,-2_-_oo-.!2!

OlOllrN.

AUmO

CDP-CE375

CDP-CE275

© 2001 Sony Corporation

2

To prevent expose fire or shock hazard,

To avoid electrical shock, do no_ open the cabinet.

RefEr servicing to qualified personnel only.

do not the unit to rain or moisture.

This symbol is intended to alert the user to tile presence of uninsulaled "dangerous voltzge" within the product's enclosure thai may be of sufficient magnfiude to constitute a risk of electric shock to persons.

Ownerfs Record

The model and serial numbers are ]ocaled al the rear of the unit.

Record the serial ]ltl]zqher in the space pmvlded below.

Rear to them whenever you call upon your

Sony dealer regarding this product.

Model No.

Serial No.

AC power cord musl be changed only at tile qualified service shop.

Do not install the appliance ill a confined space, such as a bookcase or built-th cabinet.

To prevent fire, do not Cover tile ventitalion of the apparatus with news papers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on tile apparatus.

//_ This symbol is intended to alert the user to maintenance (servicing) instructions in the fiteralure accompanying the appliance.

INFORMATION

This equipment has been tested and fbund to comply with tile limits fPr a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable prolection agai]lsl harmful intert_rence in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with tile instructions, may cause ha_vnful intert_rence to radio communications.

However, there is no guarantee thai interference will ]lot occur ill a particular installafon.

If'this equipment does cause harmful inler_krence to radio or television reception, which can be determined by mining the equipmen_ off and on, the user is encouraged to try to co_rect tile intefl_rence by one or more of tile following measures:

Reorlellt or relocate _he receiving antenna.

increase tile separation belween the equipment and receiver.

Connect tile equipment into an outlet on a circuit different from that to which tile receiver is connected.

Consult the dealer or an experienced radlo/TV technician fPr help.

CAUTION

You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment.

The instructions in this manual are for CDP-CE375

and CDP-CE275.

CDP-CE375 is the model used for illustration purposes only.

Any difference in operation is clearly indic_led th the text, ibr example,

"CDP-CE375 only."

Tip

Instructions in this manual describe tile controls on the player.

You can also use the controls on the remote if they have the same or similar names as those on the player

(CDP-CE375 only).

Front Panel ..............................................................................................................................

Rear Panel ................................................................................................................................

Remote Control .......................................................................................................................

Getting Started

Inserting Batteries Into the Remote Control (CDP-CE375 only) ............................................

6

Hooking Up the System ..........................................................................................................

6

Playing CDs

Loading the CD .......................................................................................................................

7

Playing the CD --- Normal Play/Shuffle Play;Repeat Play .....................................................

8

Using the CD display ..............................................................................................................

Replacing Discs While Playing a Disc ..................................................................................

9

10

Programming the CD tracks ..................................................................................................

Fading in or Out ....................................................................................................................

11

12

Recording From CDs

Recording a CD by Specifying Tape Length (Time Edit) .....................................................

12

Adjusting the Recording Level (Peak Search) ......................................................................

13

Additional Information

Precautions ............................................................................................................................

Notes on CDs .........................................................................................................................

Troubleshooting .....................................................................................................................

Specifications ........................................................................................................................

14

14

15

15

4

5

5

3

4

The items are arranged in alphabetical order.

Ret_r to the pages indicated in parentheses ( ) tbr details.

CDP-CE375

l

]

1ii1

CDP-CE275

T

I ,TTT ,

1111

T

1

CHECK (_ (l 1, 12)

CLEAR I_ (1 l, 12)

DISC 1-5 [_] (8, 9, ] _)

Disc compartment IJ_._/(7)

DISC SKIP [_] (7, 10, 12)

Display [i_] (9)

EX-CIIANGE

FADER 1i19(12)

I_] (10, 13)

PEAK SEARCH [_i_ (13)

PHONES jack [2_ (9)

PLAY MODE _i_j (8, 9, II, 13)

POWER [i_i] (7)

Remote sensor ]]_] (6)

REPEAT IJ_ (8)

TIME _ (9, 10)

TIME EDIT [i2_](12)

_Tr_ 9-7O

37 T;--

ff I

I BUTTON DESCRIPTIONS

OPEN/CLOSE

C> L_] (8, II, _3 )

|| I}_] (9, 13)

I [_] (9, ]3)

[_ (7, 9)

Nzl<3AMSt>DG dial [_ (9, 1 I, 13)

•_._/m,.'_ Li2_](9. 12)

I

ANALOG OUT L/R .jacks [_] (6)

DIGITAL OUT OPTICAL jack [_'] (7)

Mains lead [_'1 (6)

[]

N]------

N-------

[]

N-------

O(Z]D

000

000

000

------N

------N

N-------

N------

N-------

----N

----N

------N

ANALOG OUT LEVEL + [_i_

(6, 7)

CHECK

L_I_]

12)

CLEAR _j_ (1 I, 121

CONTINUE I[_] (8)

DISC 1 5[Z](8,9,11)

DISC SKIP [Ji_](7, 10, 12)

FADER _ (12)

Number buttons ]i_] (9, I It

PROGRAM [!i]] (8)

REPEAT [_'] (8)

SHUFFLE [_] (8)

TIME [_] (9, I0)

] BUTTON

>10 [_] (9)

DESCRIPTIONS

II [8.'.'](9, 13)

m I_i_ 0, 13)

]

6

Hookups

This section describes player to an amplifier.

power of each component connections.

how to hook up the CD

Be sure to turn offthe belbre making the

CD player

Youcancontrol remote.

twoR6(size the+andonthebatteries thebatlery tothediagram compartment.

Insert and untilthepositive position.

using

[] ontheplayer.

Tip

When the remote no longer olzerates the system, replace both batteries with new ones.

Note

• DO not leave the rel2_ote near all extremely hot or humid place.

• Do ]lot drop any foreign object into the remote casing, particularly when replacing the batteries.

• Do not expose the remote sensor to direct sunlight or lighting appar_luses.

Doing so may cause a malthnction.

• [f you don't use _he remote tbr an extended period of time, remove _he b_lteries to avoid possible damage from battery leakage and corrosion.

ANALOG r_ rf ANALOG OUT

(Red) (R)

OUT _ (White) (L)

Audioinput

{White) (L)

_

_

Audioinput

(Red) (R)

[_ : Signal flow

Amplifier d

To mains

Tip {CDP-CE375 only)

You can _,!iust the analog output level to tile amplifier using the remote comes wgh this player.

Press ANALOG OUT LEVEL I_/on the remote.

You can reduce the output level up 4o 20 dB.

When you reduce the mlalog outpm level, "FADE" appears ill the display.

When you turn offlhe player, _he m_alog output level autom_lieally re_urns to the maximum level.

To mains

Making digital hookups

If you have a digital component such as a digital amplifier, D/A converter, DAT, or MD, connect the component via the DIGITAL OUT

(OPTICAL) connector using the optical cable

(not supplied).

Take offd_e cap and plug in the optical cable.

Note that you cannot use the fbllowing

_hnctions when making this connection:

• Fading In or Out (see page 12)

• Adjusting the output level using the

ANALOG OUT LEVEL +/ buttons on the remote

POC-15

Optical cable {not supplied)

CD player Digital component

INPUT

1 Turn on the amplifier and select the CD player position so that you can listen to the sound from this player.

2 Press POWER to turn on the player.

3 Press _OPEN/CLOSE.

The disc compartment slides out.

4

Place a disc on the disc tray with the label side up.

Note

When you connect via the DIGITAL OUT

(OPTICAL) connector, noise m_y occur when you play CD sot_ware olher than music, such as a CD-

ROM.

Transporting the player

Before transporting the player, tbllow the procedure below to relurn the internal mechanisms back to their original position.

1 Remove all the discs from the disc tray.

2 Press _ OPEN/CLOSE to close the disc tray.

"no dISC'" appears in the display.

3 Wait for 10 seconds, then press

POWER to turn off the player.

Disc number

When you play a CD single, place it on the inner circle of the tray.

S To place other discs, press DISC SKIP

and place the discs in the order you want to play,

Each time you press d_e button, the disc tray turns and you can place the discs in the empty disc compartments.

The player plays the disc in front of you first.

6 Press _OPEN/CLOSE to close the disc compartment.

8

--Normal Play/Shuffle Play/Repeat

Play

This unit lets you play the CD in different play modes.

1 Press PLAY MODE repeatedly until the mode you want appears.

Select

ALL DISCS

(Continuous

Play)

I DISC

(Continuous

Play)

ALL DISCS

SIJUFFLE

I DISC

SItUFFLE

PROGRAM

To play

All discs in the player consecutively number.

in the order of disc

Only tile disc you've selected.

All tracks on all discs in random order.

All tracks on the specific disc in random order.

The tracks on the CD in the order you want them to be played (see "Programming

CD tracks" on page I I).

the

2 Press Ca-.

Tips

• You can select tile disc you want to start playing

first by pressing one oflhe DISC I 5 buttons.

• You cml specify discs during ALL DISCS Shuffle

Play mode, and the tracks on the specified discs are played ill a random order.

Press DISC 1 - 5 to specity the discs after Step I.

Semi-circles appear around the specified disc numbers in the display.

To cancel the selected discs, press DISC 1 5 again. The semi-circles disappear.

To remnl m ALL DISCS Shuffle Play, press PLAY

MODE until "ALL DISCS SHUFFLE" appears in the display.

• You can select the playing mode by pressing

CONTINUE, SIJUFFLE, or PROGRAM on the remote (CDP-CE375 ONLY).

Repeat Play Operations

You can play the CD tracks repeatedly play modes.

in any

To activate

REPEAT display.

the Repeat Play _hnction, until "REPEAT' appears press in lhe

TO

Repeal only one track

Cancel Repeat Play

Press REPEAT

Until "REPEAT 1" _ppears while playing the track you want to repeat.

Until "REPEAT" or

"REPEAT 1" disappears.

When you are in the Repeat Play function, player repeats the tracks as tbllows:

The player repeats When the disc is played in

Continuous Play

(ALL DISCS)

Continuous Play

(1 DISC)

Shuffle Play

(ALL DISCS)

Shuffle Play

(1 DISC)

Program Play

(page 1 I)

All the tracks on the current disc

All the tracks on all discs in random order

All the tracks ml the current disc in random order

The same program the

All the tracks on all discs

Other Operations

To

Stop playback

Pause

Select a track

Select a track directly

Go to the next disc

Select a disc directly

Find a point in a track

Play tracks in random order

Remove the CD

Adjusl the volume

DO this

Press II.

Press It.

Press II _gain or

_> to resume pl_y.

Durin S play or pause, turn

_<I<IAMS_ clockwise

(to go forward) or counterclockwise (to go backward)

(or press _( to go forward) or _ (to g o backward) on the remole

(CDP-CE375 only)).

Press the number button on the remote (CDP-CE375 only).*

Press DISC SKIP.

Press DISC I - 5.

Press and hold _ or _1 during playback, and release at the desired poim.

Press PLAY MODE until

"SHUFFLE" display.

appears in the

Press _OPEN/CLOSE.

Press ANALOG OUT

LEVEL +/- on the remote

(CDP-CE375 only).

* When you directly locate a track numbered over l 0, press >10 firsb then the correspondin S number buttons.

To enter "0," use button 10.

Example: To play track number 30

Press >10 firsb then 3 and 10.

Tips

You can _diust the analo S outpu_ level with the

ANALOG OUT LEVEL

(CDP-CE375 only).

on the remo_e (page 6)

• You can _djust the headphones volume on the remote.

To adjusl the volume, connect the headphones to _he PHONES jack and adjusl d_e volume with the ANALOG OUT LEVEL _/on the remote (CDP-CE375 only).

• If d_ere is no CD in the player, "no dISC" appears in the display.

Notes

• If '_/--/" appears in the display, the disc has reached the end while you were pressing )'_.

P_ss

_1 or turn _3<3A MS_D0 counterclockwise to go back.

• If you press ANALOG OUT LEVEL _% on the remote while _co_ing, fl_e reco_ing level will change even when it is preset on the tape deck, etc

(CDP-CE375 only).

You can check infbrmation about the disc using the display.

In the stop mode

Press TIME.

Current disc number t .........

I

Total playing time riS_sc_ m_cK

I I/-I

MfN _C _ r ....................

I

Total number of tracks Music calendar

The display shows lhe current disc number, the total number of tracks, lotal playing time and music calendar.

The intbnnation also appears when you press

_OPEN/CLOSE to close lhe disc tray.

The tracks numbered over 20 cannot be displayed in the music calendar.

Notes on the disc number indications

The red circle around a disc number indicates the disc is ready to be played.

• When all the tracks on a disc have been played, the semi-circle around the disc number disappears.

• When a disc compartment is recognized as empty, the semi-circled disc number disappears.

During normal playback

While playing a disc, |he display shows the current disc number, track number, playing time of the track and the music calendar.

The track numbers in _l_emusic calend_r disappear after they are played.

-_

¢)

1_ continued

9

10

Using the CD display (continued)

To check the remaining time

Press TIME during playback.

Each time you press this button while playing a disc, the display changes as shown in the chart below.

Playing time and number on the current track

--* Remaining time on the current track -_.

Remaining time on the disc

Notes

When the disc has more than 24 tracks, " appears in,cad of the remaining time.

.

"

• The remaining time on the disc appears only when the disc is played in Continuous Play.

You can open the disc tray while playing a disc so that you can check what discs are to be played next and replace discs without interrupting playback of the current disc.

1 Press EX-CHANGE.

The disc tray opens and two disc compartments appear.

Even if the player is playing a disc, it doesn't stop playing.

2 Replace discs in the compartments

with new ones.

The player plays the disc oll the left side compartment after 1he current disc, and then the one on the right side compartment.

3 Press DISC SKIP.

The disc tray turns and other two disc compartments appear.

4

Replace discs in the compartments with new ones.

5 Press EX-CHANGE.

The disc tray closes.

While the disc tray is open by pressing the EX-CHANGE button

• If the playback of the current disc ends, the player stops playing.

If the disc is played in

1 DISC Repeat Play mode (see page 8), the current disc starts playing again.

• In ALL DISCS Shuffle Play mode (see page

8), tracks are reshuffled on the current disc.

• In Program Play mode (see page 11), only

the tracks on the current disc are played.

• DO not push the disc tray to close it in

Step 5, as you may damage the player.

You can arrange the order of the tracks on the discs and create your own program.

The program can contain up to 32 "steps" one

"step" may contain a track or a whole disc.

1

Press PLAY MODE repeatedly until

"PROGRAM" appears in the display before you start playing.

Ifa program is already stored, the last step of the program appears in the display.

When you want to erase the whole program, hold down CLEAR until "ALL CLr" appears in the display (see page 12).

2 Press DISC 1 - 5 to select the disc.

"AL" in the display stands for "all" tracks.

When you want to program the whole disc as one step, skip Step 3, and go to Step 4.

3 Turn g<3<3AMS_ until the track you

want appears and push _<I<_AMS_>_ to select the track.

The track number that you programmed, the playing order, and the total playing time appear in the display.

If you've made a mistake

Press CLEAR, then repeat Step 2.

Tip

You can select the track using the number buttons on the remote. To select a track with a number over 10, use >10 (see page 9).

4

To program other discs or tracks, do the following:

TO program

Other discs

Other tracks on the same disc

Other tracks on o_ber discs

Repeat Step(s)

2

3

2 and 3

S Press I2> to start Program Play.

To cancel Program Play

Press PLAY MODE.

Tips

You can crea_e your program while checking the disc labels.

While the disc tray is open, fPllow Steps 1 to 4 with pressing the DISC SKIP button to check the disc labels.

If yotl close the disc tray before Step 5, the total playing time appears ill the display at}er a while.

Note that, if the programmed track number isn't tbund on the disc, that slep is automatically erased.

• The progrmn rcmalns even after the Program Play ends.

When you press tile _ button, you can play the same progrmn again.

• Tile progrmn remains until you erase it or turn off the player.

If yotl replace discs, the programmed disc m_d track numbers remain.

So, the player plays only the existing disc mid track numbers, ltowever, the disc and track numbers d_at aren't tbund in lhe player or on the disc are deleted t_om _he program, and the rest of the program is played in the programmed order.

• For the recording m the A side or B side of the cassette tape, you can pause Program Play.

Note

The lotal playing time doesn't appear when:

-- You have programmed exceeds 20.

a track whose number

--The total playing time of the program exceeds 200 millUteS.

Checking the track order

You can check your program betbre or after you start playing.

Press CHECK.

Each time you press this button, the display shows the track (the disc and track numbers) or the disc (the disc number and "AL" indication) of each step in the programmed order. After the last step in the program, the display shows

"End!' and returns to the original disploy. If you check the order after you start playing, the display shows only the remaining steps.

O

O continued

11

12

Programming the CD tracks

(continued)

Changing the track order

You can change your program before you start playing.

TO

Erase a track

You need to

Press CHECK unti! the track you dolEt want appears in the display, then press CLEAR.

Erase the las_ track Press CLEAR.

Each time you in the program press the button, be cleared.

the last track will

Add tracks to the Follow Steps 2 through 4 of the end of the programming procedure.

program

Change the whole Itold down CLEAR until "ALL program CLr" appears in the display.

completely Creole a new program the programming tbllowing procedure.

You can manually fade in or out to prevent tracks from starting or ending abruptly.

Note thor you cannot use this etl_ct when you use the DIGITAL OUT (OPTICAL) connector.

TO Press FADER

Start play fading in During pause.

"FADE" flashes.

The play fades in.

End play fading out When you want to start fading out. "FADE" flashes.

Then play

Pades ou_ and the player pauses.

Fading time lasts tbr 5 seconds.

You can have the player ereote a program thal will fit the length ofd_e tape.

The player automatically creales a program, keeping the original order of the disc.

The program can contain up to 32 steps (a pause inserted between steps is counted as one slep).

Note _l_a_tracks numbered over 20 cannot be programmed automatically.

1 Press DISC SKIP to select the disc.

2 Press TIME EDIT repeatedly before you

start playing until "EDIT" appears and

"A" in the tAXI indication flashes in the display.

3 Press _ length.

or _ to specify the tape

Each time you press these buttons, _l_e disploy changes as sbown below, wid_ the tape lenglh of one side lbllowing each indication.

C-46 23.00 _ C-54 27.00 _ C-60 30.00

= =.-,_ C-90 45.00 ,_ C-74 37.00

4

Press TIME EDIT to have the player create the program.

The display sbows the tracks to be recorded.

"B" in 1he _ indication flashes in _l_e displzy.

S When you record on both sides of the tape, press TIME EDIT again.

The player inserts a pause, then creales the program tbr side B. The display shows _l_e programmed tracks.

When you record on one side of the tape, skip this step.

6 Start recording on the deck and then press [2:>on the player.

7 Reverse the tape to side B and press

C> or II on the player to resume playing the remaining tracks.

To cancel Time Edit

Press PLAY MODE.

Tips

You can program the tracks you want in advance.

Create a program selecting the desired tracks, then tbllow Steps 2 to 7. Be carefhl that the total playing time of the program does not exceed the tape length of one side.

• You can set the tape length freely using

Example: Whm_ the tape length of one side is 30 mtautes m_d 15 seconds

I To set the mtautes, turn _ AMS until "30" appears in the display, then push _<k<l AMS _-I>_.

2 To set the seconds, turn _ AMS until "15" appears in the display, then push _ AMS _[::_.

• To check and change your program, see pages I I and 12.

The player locates the highest level among the tracks to be recorded to let you adjust 1he recording level belbre you start recording.

1 Before you start playing, press PEAK

SEARCH.

"PEAK" flashes in lhe display and the player starts scanning the disc searching _hr the highest peak level.

Atler scanning all the tracks, the player repeats _l;e portion with the highest peak level.

2 Adjust the recording level on the deck.

3 Press • on the player to stop Peak

Search.

"PEAK" disappears from |he display.

Notes

• The portion wi+h the highest level m_y differ every time you _ the adjustment on the same disc. The di fPe_nce is, however, so slight that you won't find m_y problem precisely.

in adjusting the _co_ing level

• Peak Search does no_ operate while you open the disc tray by pressing _he EX-CHANGE button.

,_

II_

0 ta

_I.

3

O

O

13

14

If you have any questions or problems concerning your ployer, please conattlt your nearest Sony dealer.

On safety

Caution "File use of oprical instruments with this product will increase eye hazard.

• Should any solid object or liquid thll into the cabinet, unplug file player and have it checked by qualified personnel before operating it any further.

• Discs with non-standard shapes (e.g., heart, square, slat) cannot be played on fltis unit. Al_empting to do so may damage the unit. Do not use such discs.

On power sources

• Before operating tile player, check thai the operating voltage of the player is identical with your local power supply.

The operating voltage is indicated on tile nameplate at the rear of the player.

• The player is not disconnected from _he AC power som'ce 0nains) as long as it is connected to the wall outlet, even if the player itself has been turned ofl_

• If you am not going te use the player _r a long thne, be sure to disconnect the player from tile wall outlet.

To disconnect the AC power cord (mains lead), grasp _he plug itself; never pull the cord.

• AC power cord mu_ be changed only at _he qualified _rvice shop.

On placement

• Place the player in a location with adequate ventilation to prevent heat build-op in tile player.

• Do no_ place tile player on a sot_ surface such as a rug that might block tile ventderion boles on tile bonom.

• Do not place tile player ill a locarion near heat sources, or ill a place su/'(i ect to direct sunlight, excessive dust or mechanical sbock.

On operation

• If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on tile lenses inside tile player.

Should this occur, the player may not operate properly.

]n dris case, remove the disc and leave the player turned on tbr about an hour until tile molsl ure evaporates.

On adjusting volume

• Do no_ turn up the volume while listening to a portion with very low level inputs or no audio signals.

If you do, tile speakers may be damaged when a peak level portion is played.

On cleaning

• Clean tile c_lrineb panel and controls with a soft cloth slightly moistened with a mild detergent solution.

Do not use any type of _brasive pad, scouring powder, or solvent such as alcohol or benzine.

On handling CDs

• To keep tile disc clean, handle tile disc by its edge.

Do no_ touch the surface.

• Do no_ stick paper or tope on tile disc.

• Do ]lot expose tile disc to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside tile car.

• Do not use any commercially available stabilizer.

If you do, the disc and tile player may be damaged.

• After playing, slore the disc in its case.

On cleaning

• Before playing, clean tile disc with a cleaning cloth.

Wipe the disc ti'om tile centre out.

• Do not use solvents such as benzine, thinner, commercially available cleaners or anti-statlc spray intended for vinyl LPs.

Notes on CD-R/CD-RW playback

• Discs recorded on CD-R/CD-RW drives may not be played back because of scratches, dirt, recording condition, or tile drive's characterisrics.

Besides, tile discs, which are nol yet finalized at the end of recording, cannot be played hack.

If you experience any oflhe lbllowing difficulties while using the player, use this troubleshooting guide to help you remedy 1he problem.

Should any problem persist, consult your nearest Sony dealer.

There's no sound.

Check thai Ihe player is connected securely.

• Make sure you operale tile mnp]iger correctly.

• Adjust the analog output level with ANALOG

OUT LEVEL +/on tile remote (CDP-CE375 only).

The CD does not play.

• There's no CD inside the player.

"no dISC" appears.

Insert a CD.

• Place lhe CD with tile label side up on the disc troy correctly.

• Clean the CD (see page 14).

• Moislure has condensed inside the player.

Remove lhe disc and leave fi_e player turned on tbr about an hour.

• Place tile CD in the correct position on the disc troy.

The recording level has changed.

• The recording level changes if you adjust the analog output level with ANALOG OUT

LEVEL +/- on tile remote during recording

(CDP-CE375 only).

The remote does not function (CDP-CE375 only).

• Remove tile obstacles in tile path of the remote mid the player.

• Point the remote at the remote sensor [] on the player.

• Replace all the batteries in the remote with new ones if they are weak.

The player functions incorrectly.

• The microcomputer chips ]nay be operating incorrectly.

Tmzn tile power o11. then turn it back on to reset the player.

Compact disc player

Laser

Frequency response

Dyn_mlc ravage

Harmonic distortion

Semlcowduc_r laser tL

780 nm)

Emission duralion: continklous

2 llz tO 20 kltz _ 0.5

dB

More allan 93 dR

Less 01an 0.0045%

Outputs

ANALOG

OUT

DIGITAL

OUT

(OPT[CAL)

PHONES

(CDP-CE375 only)

Jack type

Phono jacks

Optical outpul connector

Stereo phone jack

Maximum

output level

2 V

Load impedance

Over

(al 50 kilohms) kilohms

10

/gdBm

10 mW

W_e length:

660 nm

32 ohms

General

Power requirements

Power consumption

Dimensions (approx.)

(w/h/d)

Mass (approx.)

120 V AC, 60 Hz

I I W

430 x 110 x 400 mm

(17 x 4 3/8 x 15 3/4 in.) incl. prt_}ecting parts

5 kg (ll Ibs I oz)

Supplied accessories

Audio cord (2 phono plugs 2 phono plugs) (I)

Remole commander (remo_e) (1) (CDP-CE375 only)

R6 (size AA) banedes (2) (CDP-CE375 only)

Design and specifications are subject to change without notice.

O

O

15

Sony Corporation Printed in China

advertisement

Key Features

  • HiFi CD player
  • CD-R playback CD-RW playback
  • Built-in speaker(s)
  • Headphone connectivity
  • Black

Related manuals

advertisement