User+Manual-New PCB 2.0
WATERPROOF WEIGHING SCALE
USER’S MANUAL
Instruction Manual
NOTICE ................................................................1
Preparing Issues before Use ...............................1
1. Product Instruction .........................................2
1) Product Features .............................................. 2
2) Product Model and Parameter ............................ 2
2. Functions and Operations ...............................3
1. Turning on Scale / Zero Operation ..................... 3
2. Turning off Scale .............................................. 3
3. Tare Operation ................................................ 3
4. Set Operation ................................................... 3
5. Power Immediate Indication ............................ 4
6. Power Charge Operation.................................... 4
7. Power Saving Operation .................................... 4
3. Environment Parameter Setting .....................4
1. Display Precision ............................................... 4
2. Unit of Measurement ......................................... 4
3. Display Brightness ........................................... 4
4. Zero Tracking ................................................... 5
5. Reverse Display ................................................ 5
6. Stability ............................................................ 5
7.Energy saving function..................................... 5
8.Audible alarm .................................................. 5
9.Display speed ................................................. 5
4. Weighing Alarm and Counting ........................5
1. Set weighing alarm ........................................... 5
2. Set counting ..................................................... 5
5. Signs Meaning .................................................6
NOTICE
1. Do not use the scale in extreme temperature areas.
2. Do not strike and stress. (Not over the Maximum Capacity)
3. The scale should be put on an air flowing and dry place with a clean
surface, and be charged every three months when it can not be used for
a long time. When it needs to be used again please charge it before
use.
4. As a counting meter for force check, scale should be checked termly
to ensure the accuracy.
5. Do not open the lead sealing bottom of scale yourself. You should
contact with the dealer or company.
Prepare Issues before Use
1. Please place the scale on the stable and flat table, no vibration.
Adjust the four feet of the scale to make the scale balanced, till the air
bladder of the gradienter is in the center of the circle.
2. Do not place the scale in the environment which is near to
temperature extremes or ail-flowing extremes, direct sunshine or the
wind alleyway of air conditioning.
3. Before opening the scale, the scale plate can not be touched with
anything.
4. After opening the scale, the barycenter of scale should be located in
the center of the scale plate, which will ensure the precision.
5. Scale should be charged when the power voltage is not enough after
opening scale.
Product Instruction
1. Product Features
HACCP international food safety standard and CE, RoHS
approval certificates are all available.
Designed by professional institutions and up to the IP68
Waterproof level
More suitable for product line with anti-vibration design
Dual Display LED
Protection by Automatic overload alarming
Functions of auto calibration and auto zero tracking
Functions of weighing Alarm
Counting
Parameters changeable
Voltage indication and low voltage alarm
Auto-off power function
Long work time with Sealed Lead-acid Battery (6V4Ah)
2. Product Model and Parameters
MODEL
006
1.5
3
6
15
30
Max. Capacity
600 g
1.5 kg
3 kg
6 kg
15 kg
30 kg
Mini. Capacity
4g
10 g
20 g
40 g
100 g
200 g
Verification
Scale Interval(e)
0.2 g
0.5 g
1g
2g
5g
10 g
Actual
Scale Interval(d)
Max. TARE
0.05 g
600 g
0.1 g
1.5 kg
0.2 g
3 kg
0.5 g
6 kg
1g
15 kg
2g
30 kg
Accuracy
III
Working Temperature
-10℃~﹢40℃
Power supply
6V4Ah sealed lead-acid battery (With Special-purpose charger )
Plate size
18.8 × 22.6 cm
Functions and Operations
1. Turning on Scale/ Zero Operation
■
When scale is off, press [ON/ZERO] key. The whole display
illuminates with a serial of steps that Scale Edition number (SPx.x) display, then system checks itself and the display screen is
cleared. After the Zero indicates lighting, the display changes to
indicate the gram-display, which is ready for weighting
■
When scale is on, press [ON/ZERO] key. The display screen is
cleared.
2. Turning off Scale
Scale can be turned off forcibly by pressing [OFF] key.
3. Tare Operation
●
Place the container on the scale until the display indicates a
steady weight. Press [TARE] key, then the display indicates 0
and the Tare indicate lighting.
●
Place the weighting objects into the container, then the scale
shows the Net weight.
●
Move the container and the weighting objects off, then the scale
will show the minus weight of the container. Then press [TARE]
key again, the tare weight can be cleared, that the Tare indicate
out and the scale is set to zero.
★ Can not tare while it is not stable.
★ Can do Tare Operation continuously till the Tare Weight equals
the Maximum Capacity.
4. Power Immediate Indication
Power voltage is indicated under 3 levels. When it is displaying L
(under Low level) and flashing, you should recharge immediately.
Otherwise it will be auto turned off in 15 minutes.
5. Power Saving Operation
●
You could choose to open or close the Assistant Display to save
power.
●
After the indicated value steadied for 10 minutes, the scale will
be Auto-off.
●
After the indicated is at zero for 40 seconds, the scale will show
0.
6. Power Charge Operation
The power of this scale is provided by Sealed Lead-acid Battery (6V4Ah)
inside. When the power voltage indicator shows that the power is low or
the LED is displaying L and flashing, scale should be charged by the
charger in battery storehouse. While charging, the power indicator will
coruscate circularly, after electric quantity is full, it will show FULL, it
need about 12hrs.
Environment Parameter Setting
When scale is on, the same time press on [SET] and [TARE] key,
you can enter the display of Environment Parameter Setting. Press
[TARE] key to choose and [ON/ZERO] to confirm, then into next item.
PrE-Display Precision: 0 means natural, 1 means doubled
precision, 2 means super precision.
Initialization is 0
Unt-Weighing unit: 0 means g, 1 means kg, 2 means lb.
Initialization is 1
Brt-Display Brightness: 1~3 (Bright to dim).
Initialization is 2
ZEr-Zero tracking: 0~4(0 to 4 divisions). Initialization is 2
dIS-Reverse display : 0 means closed, 1 means keeping.
Initialization is 1
FILt-Stability: 0~3(Getting to most stable, but display speed is
getting to slowest). Initialization is 1
SAV:
:Energy saving function. 0 is closing the function, 1 is starting.
Out:
: Audible alarm, make complete of weighing alarm. 0 is when
inferior limit < Weight ≤ cap limit, audible alarm is starting. 1 is
when Weight ≤ inferior limit or Weight > cap limit, audible
alarm is starting.
SPd:
:Display Update Speed
0 is Speed Slow. 1 is Speed Fast. The Default is 0.
After setting it will be auto turn on.
Weighing Alarm and Counting
1. Set Weighing Alarm
(1) At zero, the same time press [SET] and [ON/ZERO] key to set.
Now display rAng.
(2) Press [ON/ZERO] to confirm, the inferior limit indicate lighting.
Now press [SET] to change the digit, press [TARE] to change
the value, press [ON/ZERO] to confirm. Then the cap limit
indicator is lighting and enters to set cap limit. The same as set
inferior limit.
(3) After setting it will be auto turn on. Now if,
Weight ≤ inferior limit, the inferior limit indicator is lighting.
Inferior limit < Weight ≤ cap limit, accept indicator is lighting.
Weight > cap limit, the cap limit indicator is lighting.
(4) When the cap limit value is 0, the function will be closed.
(5) If re-set the weighing units, the function will be closed.
Note: Please know the units and precision clearly, in case of any
error.
2. Set Counting
(1) Under the unit kg or g, place given value sample on the pan,
then the same time press [SET] and [ON/ZERO] key to set.
Now display PCS. Press [ON/ZERO] to confirm, then it
displays 00000. Now press [SET] to change the digit, press
[TARE] to change the value, press [ON/ZERO] to confirm. After
setting it will be auto turn on, enter counting and counting
indicate lighting.
(2) The data will be saved when power on again. If re-set weighing
units or display precision, the function will be closed. Please re-set.
(3) Under the unit lb, no counting functions.
Signs Meaning
SP x.x
Version
nnnnnn
Indicate that the weighting object is overloaded.
----Turn on zero is lower or higher, please reduce
and add weighing. Or re-calibrate.
- Lo A reminder that it will shut off in 1 minute, power
should be charged since the power voltage is
too low.
FULL
Power has been charged fully.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement