Catalog Section 28 - Communication

Catalog Section 28 - Communication
Communication
In this interactive PDF
you can:
Section 28
®
• Use bookmarks to
navigate by product
category
Communication
• Use bookmarks to
save, search, print
or e-mail the catalog
section
• Click on part #s
to link directly to
our online store for
current pricing, specs,
stocking information
and more
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Volume 14
28-1
Practical Control and Information Communications
Use AUTOMATIONDIRECT’s communication products to provide a link via phone, Ethernet or serial connection to your
industrial controllers. Serial products include cable kits, RS-232/422 network adapters and converters.
Coordinated control
Communication links between controllers can be used to create
robust, modular control systems. Sharing data between separate
operations enables each local controller to better contribute to the
system's overall performance. Whether separated by feet or by
miles, your controllers can access what’s going on in
the world around them.
Data sharing
Run a more effective business by making use of the valuable information within your process controllers. The business needs to know
what manufacturing is doing whether you call it ERP, MES, SCM, or
0just plain common sense.
Remote support
Remotely access machine or process controllers for troubleshooting,
configuring, updating or monitoring the system. Whether it’s your
production facility or your controller in a customer’s facility, having
convenient and secure remote access ensures maximum production
with minimal support costs.
Cat5e STP Ethernet Patch
Cables: 3 ft. to 50 ft. lengths
RoHS
Commercial Grade vs. Industrial Grade
Before you take a risk with commercial grade products to save a
few bucks, ask yourself how much just one field failure will cost
you in service time, reputation, and money. Communication
products not designed to operate in the heat, cold, or humidity of
an industrial site or products not ruggedized for power spikes and
vibration don’t have to quit working to cause headaches.
Communication products, along with cables and connectors, are
notorious for causing those irritating intermittent control system
RoHS Compliant
bugs that inevitably absorb loads of troubleshooting man hours
over a few dollars in parts. Neither your customer nor your family
wants you onsite resolving a late night or weekend communication link issue. Sometimes commercial grade will do, but for those
times when you and your customer need rock-solid reliability,
AUTOMATIONDIRECT has the best values in industrial communication products.
Volume 14
e28-2
Communication Products
1 - 80 0 - 633 - 0405
Ethernet Switches and Media Converter
Company
Information
Systems
Overview
®
Performance and Quality
Managed Models
Starting at $445
Unmanaged Models
Starting at $99
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Metal Models (-WT)
Starting at $199
Gigabit Ethernet
(on select models)
Industrial Strength Ethernet
Stride is our line of managed and unmanaged industrial grade Ethernet
switches and media converters. Designed with our PLC, HMI and drive
customers in mind, Stride Ethernet switches are specifically built for industrial environments. With a Stride industrial Ethernet switch on an isolated
control LAN, you can reduce data collisions that slow down your network.
Stride Ethernet switches automatically determine and remember the
devices connected to each port and route messages only through the
appropriate ports. Install Stride switches and your Ethernet control
network will maintain more consistent cycle times even under heavy I/O
and data exchange.
Extreme Temperatures
For industrial applications where temperatures can change from freezing
to sweltering heat, the Stride line offers Ethernet switches that are
designed for standard industrial environments, as well as the most
extreme industrial environments. The rugged metal housing switch
models offer superior EMC performance and corrosion-resistance while
also allowing you to choose various mounting methods for your application. This is standard and no kits are required!
Fiber Optic Support
Photo
Sensors
Limit
Switches
Features
Encoders
Advanced Hardware
-All 10/100/1000 RJ45 ports are auto-detecting,
auto-crossover and auto-polarity.
-Redundant power inputs with industrial
surge and spike protection
-Fiber optic ports available on certain models
- SFP transceiver modules on selected models offer
additional fiber options
Real-time Performace
-Store and Forward wire speed switching - no delays
-Full-duplex operation with flow control
(no collisions!)
-Auto crossover (MDI/MDIX) and auto polarity
True Industrial Design
- Ethernet Isolation -1500 VRMS 1 minute
- Spike protection - 5,000 watts (10x for 10 uS)
- UL, (cUL) listed and CE certified
- Hazardous locations rated for Class 1, Div. 2
- Rugged heavy-gauge Aluminum case available
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Stride offers models with a variety of Fiber Optic connections. Fiber optic
cables are immune to electrical and magnetic interference and cannot be
damaged by induced voltage transients. Fiber optic cabling not only
enhances reliability, it saves time you might have spent tracking down
those nasty communications problems caused by electrical interference.
Also, your network distance is greatly increased when using Fiber optic
cabling.
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Proximity
Sensors
Communication Products
e28-3
Part #
Index
Industrial Ethernet Switches
& Media Converter
®
Introducing Stride Managed Switches
As the use of industrial Ethernet devices increases, network security, segment isolation, and packet priority control become
increasingly difficult when using unmanaged switches. This is
where the Stride managed switch becomes especially beneficial
in an industrial network application. Supported features such as
SNMP, IGMP, VLAN, QOS and network redundancy, allow
networks to be configured and managed in a way that assures
the highest performance levels for your application.
The Stride Managed Ethernet switches allow you to design and
build reliable, rugged and cost effective networks with a switch
Mounting Options: Supports DIN-rail
and side mounting.
that will survive extreme temperatures, as well as dirty, unreliable
industrial power. Meeting UL 1604 (Class I Div. 2), and the
IEC68-2 standard for vibration resilience, the Stride switches will
provide years of reliable performance in applications too tough
for commercial grade switches.
Our managed switches offer Gigabit and fast Ethernet options,
as well as various fiber SFP transceiver modules that can be used
on select models. Just take a look at some of the key features
that separate Stride the from the rest of the pack:
Managed Switches
Redundant Dual Power Inputs with
industrial surge and spike protection
help reduce down time when there is
primary power loss. Reverse power
protection is also supported.
Activity, Link and Speed LEDs are
integrated into the RJ45 ports.
Fiber Optic Port on selected
models with ST or SC type connector that
supports half and full duplex. SFP module
options for distances up to 30Km.
Fiber LED to indicate a proper connection for the fiber connectors and
network activity. (on models with SFP
or Fiber ports).
RJ45 Ports that are fully IEEE 802.3
compliant with 10/100 autodetecting for speed and duplex
(10/100/1000 on selected Gigabit
switch models).
Auto crossover (MDI/MDIX)
automatically supports either straight
or crossed cables which greatly
reduces cable installation errors.
Power LED to indicate power
on P1 or P2 power inputs.
Flexible Console Connections
2 Console Ports (USB & RS-232) for
convenience.
All Metal Case provides sturdy protection and is designed to remove exccess
heat from components; offers superior
EMC performance.
Industrial Temperature Range
-40 to +75 °C (-40 to +165 °F) operating
temperature range. 5 to 95% RH humidity
range (non-condensing).
Agency Approvals:
UL1604, CSA C22.2/213 (Class I, Div.2)
EN50021/EN60079-15
SFP Option Modules: STRIDE SFP (small form-factor pluggable) transceivers, also called
mini- GBIC, are compact, hot-swappable transceivers with LC fiber connectors. The Stride
SE-SW8MG-4P and SE-SW10MG-2P switches have ports that accept these optional
transceivers to add fiber connectivity at Fast Ethernet or Gigabit Ethernet speed. There are
several models to choose, ranging from 550 meters to 30Km.
Model SE-SW8MG-4P shown above. For detailed specifications on all models, see following pages
Volume 14
e28-4
Communication Products
1 - 80 0 - 633 - 0405
Advantages of Stride Managed Switches
Network Security:
The Stride managed switches have several
security features that help to support a
secure network strategy.
• Port Control (Disable unused)
• Remote AccessSecurity
• IPsec Encryption
• MAC Address permission
Company
Information
Enhanced traffic filtering:
Multicast Filtering (IGMP): It is common, in a control
system, to see a large amount of Multicast packets.
These packets cannot be filtered out by an unmanaged
switch. The Stride managed switch can intelligently
‘learn’ whether certain Multicast packets should be sent
to the devices on its ports and will filter them or not filter them appropriately.
• Traffic Priority (QoS/CoS):
Using the Quality of Service feature, the Stride switch
can apply tags to a packet coming into the switch to
give that packet a higher priority going to another
switch.
• VLAN Support:
A VLAN is a logical way to separate networks in ways
that used to require physical separation. VLAN groups
can be configured through software instead of physically relocating devices or connections. This reduces
wiring costs and allows for devices to be grouped
together even if they are not located on the same network switch.
Troubleshooting Tools:
Redundancy Protocols:
In addition to STP and RSTP, Stride
managed switches support redundant
ring technology to keep the network
running even under fault conditions.
This allows you to create a ring that
allows for multiple, redundant paths on
the network. The switch will then intelligently decide the best path to take.
Web Based Configuration:
Port Mirroring: With the Port Mirroring feature you simply specify which ports’ data you want to view and
where to send that data. Plug your PC into that port
and use Ethernet sniffing software (such as Wireshark)
and you can monitor the data being sent back and
forth.
Network Statistics: By looking at the type of packets
coming in and out of the switch, you can determine
what action needs to be taken to make your network
perform better.
Modbus Status Registers:
If you have a controlling device on the network that has
Modbus TCP or UDP client capability, there are several diagnostic tags that can be read from the switch to indicate the
health of the network.
Systems
Overview
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-5
Part #
Index
Stride Managed Switches Selection Guide
®
At a glance...
Part Number
Description
Price
SE-SW5M
Part Number
Description
Price
SE-SW8MG-4P
STRIDE ™ SlimLine industrial managed 5-port
Ethernet switch, metal housing, operating temperature
range of -40 to +75 deg. C, five 10/100BaseT RJ45
Ethernet ports. Redundant power inputs with surge
and spike protection, auto-crossover, DIN rail mounting. Supports Store and Forward wire speed switching
and full-duplex with flow control. UL/CUL1604 (Class
I, Div. 2, Groups A, B, C, D) and CE marked.
SE-SW5M-2ST
SE-SW5M-2ST utilizes ST fiber ports
SE-SW5M-2SC
SE-SW5M-2SC utilizes SC fiber ports
STRIDE ™ SlimLine industrial managed 5-port
Ethernet switch, metal housing, operating temperature
range of -40 to +75 deg. C, three 10/100BaseT RJ45
Ethernet ports and two multi-mode 100BaseFX fiber
ports. Redundant power inputs with surge and spike
protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching and
full-duplex with flow control. UL/CUL1604 (Class I,
Div. 2, Groups A, B, C, D) and CE marked.
<--->
STRIDE ™ SlimLine industrial managed 8-port Ethernet
switch with all Gigabit ports, metal housing, operating
temperature range of -40 to +75 deg. C, eight
10/100/1000BaseT RJ45 Ethernet ports and four
advanced combination SFP ports. Redundant power
inputs with surge and spike protection, auto-crossover,
DIN rail mounting. Supports Store and Forward wire
speed switching and full-duplex with flow control.
UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and CE
marked. Optional SFP modules sold separately.
<--->
STRIDE ™ SlimLine industrial managed 10-port Ethernet
switch with Gigabit ports, metal housing, operating temperature range of -40 to +75 deg. C, seven 10/100BaseT
RJ45 Ethernet ports, one Gigabit RJ45 port and two
Gigabit advanced combination SFP ports. Redundant
power inputs with surge and spike protection, autocrossover, DIN rail mounting. Supports Store and
Forward wire speed switching and full-duplex with flow
control. UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D)
and CE marked. Optional SFP modules sold separately
<--->
SE-SW10MG-2P
<--->
SE-SW8M
STRIDE ™ SlimLine industrial managed 8-port
Ethernet switch, metal housing, operating temperature
range of -40 to +75 deg. C, eight 10/100BaseT RJ45
Ethernet ports. Redundant power inputs with surge
and spike protection, auto-crossover, DIN rail mounting. Supports Store and Forward wire speed switching
and full-duplex with flow control. UL/CUL1604 (Class
I, Div. 2, Groups A, B, C, D) and CE marked.
<--->
Part Number
Description
SFP-4K-FMF
SE-SW8M-2ST
SE-SW8M-2ST utilizes ST fiber ports
SE-SW8M-2SC
SE-SW8M-2SC utilizes SC fiber ports
SFP-30K-FSF
SFP-500-GMF
STRIDE ™ SlimLine industrial managed 8-port
Ethernet switch, metal housing, operating temperature
range of -40 to +75 deg. C, six 10/100BaseT RJ45
Ethernet ports and two multi-mode 100BaseFX SC
fiber ports. Redundant power inputs with surge and
spike protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching and
full-duplex with flow control. UL/CUL1604 (Class I,
Div. 2, Groups A, B, C, D) and CE marked.
<--->
SFP-2K-GMF
SFP-10K-GSF
SE-SW16M
SFP-30K-GSF
STRIDE ™ SlimLine industrial managed 16-port
Ethernet switch, metal housing, operating temperature
range of -40 to +75 deg. C, sixteen 10/100BaseT
RJ45 Ethernet ports. Redundant power inputs with
surge and spike protection, auto-crossover, DIN rail
mounting. Supports Store and Forward wire speed
switching and full-duplex with flow control.
UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and
CE marked.
<--->
C
Price
STRIDE ™ SFP (Small Form Factor) 100Mbps
transceiver (Transmit/Receive) module, supports data
transmission up to 4km on a multimode fiber.
LC duplex receptacle
STRIDE ™ SFP (Small Form Factor) 100Mbps
transceiver (Transmit/Receive) module, supports data
transmission up to 30km on a single mode fiber.
LC duplex receptacle
STRIDE ™ SFP (Small Form Factor) Gigabit (1.25GB)
transceiver (Transmit/Receive) module, supports data
transmission up to 550m on a multimode fiber.
LC duplex receptacle
STRIDE ™ SFP (Small Form Factor) Gigabit (1.25GB)
transceiver (Transmit/Receive) module, supports data
transmission up to 2km on a multimode fiber.
LC duplex receptacle
STRIDE ™ SFP (Small Form Factor) Gigabit (1.25GB)
transceiver (Transmit/Receive) module, supports data
transmission up to 10km on a single mode fiber.
LC duplex receptacle
STRIDE ™ SFP (Small Form Factor) Gigabit (1.25GB)
transceiver (Transmit/Receive) module, supports data
transmission up to 30km on a single mode fiber.
LC duplex receptacle
UL
R
US
Electrical Safety
<--->
<--->
<--->
<--->
<--->
<--->
European
Directives
RoHS
All part numbers are rated Class I, Div 2.
US Emissons WEEE Compliant RoHS Compliant
Volume 14
e28-6
Communication Products
1 - 80 0 - 633 - 0405
Stride Industrial Ethernet Fiber Transceivers
®
Field I/O
Software
C-more &
other HMI
Drives
NOTE: PORT SPEED SETTINGS FOR THE STRIDE SWITCH MUST BE
MANUALLY SET TO 100 MBPS WHEN USING A FAST ETHERNET SFP.
Features
Soft
Starters
Motors &
Gearbox
• SFP Multi-Source Agreement compliant
• Serial ID functionality support
• -40° to +85°C operating temperature range
• 5 – 95% humidity (non-condensing)
• Class 1 laser safety standard IEC 60825 compliant
• Hot swappable
• 2-year warranty
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Part Number
Mode
Data Rate
Light Source
Max Trans.
Distance
Price
SFP-4K-FMF
Multi-mode
Fast Ethernet (155MB)
1310 nm, FP
4km
<--->
SFP-30K-FSF
Single-mode
Fast Ethernet (155MB)
1310 nm, FP
30 km
<--->
SFP-500-GMF
Multi-mode
Gigabit (1.25 GB)
850 nm, VCSEL
550m
<--->
SFP-2K-GMF
Multi-mode
Gigabit (1.25 GB)
1310 nm, FP
2km
<--->
SFP-10K-GSF
Single-mode
Gigabit (1.25 GB)
1310 nm, FP
10 km
<--->
Single-mode
Gigabit (1.25 GB)
1310 nm, DFB
30 km
<--->
Dimensions
Systems
Overview
Programmable
Controllers
STRIDE SFP (small form-factor pluggable) transceivers, also called miniGBIC, are compact, hot-swappable transceivers with LC fiber connectors.
The Stride SE-SW8MG-4P and SE-SW10MG-2P switches have ports that
accept these optional transceivers to add fiber connectivity at Fast
Ethernet or Gigabit Ethernet speed.
SFP-30K-GSF
Company
Information
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Inches [mm]
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-7
Part #
Index
StrideManaged Industrial Ethernet Switches
®
5-Port Managed Ethernet Switch
STRIDE SlimLine industrial managed 5-port Ethernet switch, metal housing,
-40 to +75 degree C operating temperature range, five 10/100BaseT RJ45
Ethernet ports. Redundant power inputs with surge and spike protection, autocrossover, 35 mm DIN rail mounting. Supports Store and Forward wire speed
switching and full-duplex with flow control. UL/CUL1604 (Class I, Div. 2, Groups A,
B, C, D) and CE marked.
2-Year Warranty
Dimensions
Inches [mm]
SE-SW5M
<--->
ACT/LNK LED
This is the Yellow LED on models with two
LEDs per RJ45 port.
Indicates that there is a proper Ethernet
ON (yellow) connection (Link) between the port and
(not flashing) another Ethernet device, but no
Speed 10/100 LED
This is the Green LED on models with two
LEDs per RJ45 port.
ON (green)
A 100 Mbps (100BaseT) connection is
detected.
OFF
A 10 Mbps (10BaseT) connection is
detected.
communications activity is detected.
ON (yellow)
(flashing)
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
Specifications
The following are specifications relevant to
the SE-SW5M 5-port Ethernet switch.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
3.6 W
8 oz (0.23 kg)
5.0 lb-in (0.57 Nm)
Volume 14
e28-8
Communication Products
1 - 80 0 - 633 - 0405
Stride Managed Industrial Ethernet Switches
®
5-Port Managed Ethernet Switches with Two Fiber Ports
Field I/O
Software
C-more &
other HMI
2-Year Warranty
Inches [mm]
Systems
Overview
Programmable
Controllers
STRIDE SlimLine industrial managed 5-port Ethernet switch, metal
housing, operating temperature range of -40 to +75 deg. C, three
10/100BaseT RJ45 Ethernet ports and two multi-mode 100BaseFX ST or
SC fiber ports. Redundant power inputs with surge and spike protection,
auto-crossover, DIN rail mounting. Supports Store and Forward wire
speed switching and full-duplex with flow control. UL/CUL1604 (Class I,
Div. 2, Groups A, B, C, D) and CE marked.
Dimensions
Company
Information
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
SE-SW5M-2ST
with 2 ST type fiber ports
SE-SW5M-2SC
with 2 SC type fiber ports
<--->
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
ACT/LNK LED
Speed 10/100 LED
Pushbuttons/
Lights
Specifications
This is the Yellow LED on models with two This is the Green LED on models with two The following are specifications relevant to
LEDs per RJ45 port.
LEDs per RJ45 port adjacent to the fiber port. the SE-SW5M-2ST and SE-SW5M-2SC
5-Port Ethernet switches with fiber port.
Indicates that there is a proper Ethernet
ON (yellow) connection (Link) between the port and
(not flashing) another Ethernet device, but no
ON (green)
communications activity is detected.
ON (yellow)
(flashing)
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
OFF
A 100 Mbps (100BaseT) connection is
detected.
A 10 Mbps (10BaseT) connection is
detected.
Fiber LED
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
5.6 W
8 oz (0.23 kg)
5.0 lb-in (0.57 Nm)
ON (green)
(not flashing)
ON (green)
(flashing)
Indicates that there is a proper fiber
connection (Link) between the port
and another fiber device, and that
there is communications activity.
OFF
Indicates that there is not a proper fiber
connection (Link) between the port and
another fiber device. Make sure the
fiber optic cable has been plugged
securely into the ports at both ends.
Comm.
Terminal
Blocks &
Wiring
Power
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Relays/
Timers
Circuit
Protection
This is the Green LED on the fiber optic
models.
Indicates that there is a proper fiber
connection (Link) between the port
and another fiber device, but no communications activity is detected.
Process
Communication Products
e28-9
Part #
Index
Stride Managed Industrial Ethernet Switches
®
8-Port Managed Ethernet Switch
STRIDE SlimLine industrial managed 8-port Ethernet switch, metal housing, operating temperature range of -40 to +75 deg. C, eight 10/100BaseT RJ45 Ethernet
ports. Redundant power inputs with surge and spike protection, auto-crossover,
DIN rail mounting. Supports Store and Forward wire speed switching and full-duplex
with flow control. UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and CE marked.
2-Year Warranty
Dimensions
Inches [mm]
SE-SW8M
<--->
ACT/LNK/Speed LED
This is a bi-color (green / yellow) LED on
models with one LED per RJ45 port.
Indicates that there is a proper Ethernet
ON (yellow) connection (Link) between the port and
(not flashing) another Ethernet device, but no
Speed 10/100 LED
This is the Green LED on models with two
LEDs per RJ45 port.
ON (green)
A 100 Mbps (100BaseT) connection is
detected.
OFF
A 10 Mbps (10BaseT) connection is
detected.
communications activity is detected.
ON (yellow)
(flashing)
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
Specifications
The following are specifications relevant to
the SE-SW8M 8-port Ethernet switch.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
4.3 W
10 oz (0.28 kg)
5.0 lb-in (0.57 Nm)
Volume 14
e28-10
Communication Products
1 - 80 0 - 633 - 0405
Stride Managed Industrial Ethernet Switches
®
8-Port Managed Ethernet Switch with Two Fiber Ports
Inches [mm]
Systems
Overview
Programmable
Controllers
STRIDE SlimLine industrial managed 8-port Ethernet switch, metal
housing, operating temperature range of -40 to +75 deg. C, six
10/100BaseT RJ45 Ethernet ports and two multi-mode 100BaseFX
fiber ports. Redundant power inputs with surge and spike protection, auto-crossover, DIN rail mounting. Supports Store and
Forward wire speed switching and full-duplex with flow control.
UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and CE marked.
Dimensions
Company
Information
Field I/O
Software
C-more &
other HMI
2-Year Warranty
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
SE-SW8M-2ST
with 2 ST type fiber ports
SE-SW8M-2SC
with 2 SC type fiber ports
<--->
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
ACT/LNK LED
Speed 10/100 LED
Pushbuttons/
Lights
Specifications
This is the Yellow LED on models with two This is the Green LED on models with two The following are specifications relevant to
LEDs per RJ45 port.
LEDs per RJ45 port adjacent to the fiber port. the SE-SW8M-2ST and SE-SW8M-2SC
8-port Ethernet switches with fiber port.
Indicates that there is a proper Ethernet
ON (yellow) connection (Link) between the port and
(not flashing) another Ethernet device, but no
ON (green)
communications activity is detected.
ON (yellow)
(flashing)
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
OFF
A 100 Mbps (100BaseT) connection is
detected.
A 10 Mbps (10BaseT) connection is
detected.
Fiber LED
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
6.3 W
10 oz (0.28 kg)
5.0 lb-in (0.57 Nm)
This is the Green LED on the fiber optic
models.
ON (green)
(not flashing)
Indicates that there is a proper fiber
connection (Link) between the port
and another fiber device, but no communications activity is detected.
ON (green)
(flashing)
Indicates that there is a proper fiber
connection (Link) between the port
and another fiber device, and that
there is communications activity.
OFF
Indicates that there is not a proper fiber
connection (Link) between the port and
another fiber device. Make sure the
fiber optic cable has been plugged
securely into the ports at both ends.
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Process
Communication Products
e28-11
Part #
Index
Stride Managed Industrial Ethernet Switches
®
Specifications for SE-SW5M, SE-SW5M-2ST, SE-SW5M-2SC, SE-SW8M,
SE-SW8M-2ST and SE-SW8M-2SC
Copper RJ45 Ports:
General Specifications
Ethernet switch type
Operating mode
Devices supported
Ethernet compliance
Ethernet protocols
supported
Industrial protocols
supported
MAC addresses
Memory bandwidth
Latency (typical)
Power input (typical - all
ports active at 100 Mbps)
Redundant input terminals
Input voltage
Reverse power protection
“OK” output
Indicates power and
operational status
Transient protection
Spike protection
Ethernet isolation
Operating temperature
range
Storage temperature range
Humidity (non-condensing)
Environmental Air
Vibration and shock
Agency Approvals
EMI emissions
EMC immunity
Eye safety (fiber models)
RoHS and WEEE
Packaging and protection
Industrial Ethernet managed switch with 5 or 8 ports
Store and forward wire speed switching, non-blocking.
Broadcast and multicast storm protection
All IEEE 802.3 compliant devices are supported
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
IEEE 802.3x (Full-Duplex with Flow Control)
IEEE 802.1D/w (Rapid Spanning Tree for redundant rings
and Spanning Tree for interoperability)
IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS)
IEEE 802.1Q (VLAN for traffic segregation)
IEEE 802.3ab
SNMPv1 / v2 / v3, RMON, DHCP, SNTP, TFTP, STP, RSTP,
QoS / CoS / ToS / DS, IGMPv1 / v2,
VLAN (tag and port based),
HTTP, HTTPS (SSL and TSL), Telnet, SSH and more
Modbus / TCP, EtherNet / IP, PROFInet,
Foundation Fieldbus HSE and others
2048 addresses
3.2 Gbps
10M ports 16 µs + frame time
100M ports 5 µs + frame time
SE-SW5M - 3.6 W
SE-SW5M-2ST / -2SC - 4.3 W
SE-SW8M - 5.6 W
SE-SW8M-2ST / -2SC - 6.3 W
10-30 VDC (continuous) - Class 2 Power Supply
Yes
RJ45 ports
Shielded RJ45 10/100 fully 802.3 compliant
RJ45 speed and duplex
Configurable or 10/100 auto-negotiating
Auto-mdi / mdix-crossover automatically supports
either straight or crossed cables
Auto-polarity for automatic correction of crossed
TXD and RXD pairs
Full or half duplex operation with flow control
supported on all ports
MDI / MDIX
Polarity
Modes
Fiber Ports
2 optional multimode fiber optic ports (-ST or -SC models)
100BaseFX (100 Mbps)
Fiber optic port speed
Fiber optic port
1310 nm center
wavelength
50 or 62.5/125 um (SC or ST)
Fiber
Fiber max. distance
4 km (2.5 miles)
(full duplex)
Console ports: USB and RS232 (RJ45)
Management interfaces
Text (Telnet and SSH), CLI (command line interface) and
SNMP (see the user manual for supported MIBs)
Console ports are located on the bottom surface of the switch.
Voltage same as switch input voltage
Maximum current output 0.5 Amp
15,000 watts peak
5,000 watts (10x for 10 µS)
1500 VRMS 1 minute
-40 to +75°C (cold startup at -40°C),
-40 to +167°F (cold startup at -40°F)
-40 to +85 °C (-40 to +185 °F)
5 to 95% RH
For use in Pollution Degree 2 environment.
No corrosive gases permitted
IEC60068-2-6, -27 and -32
Electrical safety: UL1604 (Class 1, Div 2, Group A, B, C,
D) E200031 CSA C22.2/14; EN61010-1, CE Marine and
offshore rated per ABS
FCC part 15, ICES-003, EN55022
IEC61000-6-2, CE
IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
RoHS and WEEE compliant
Aluminum case; IP30
Volume 14
e28-12
Communication Products
1 - 80 0 - 633 - 0405
®
Managed Industrial Ethernet Switches
16-Port Managed Ethernet Switch
Company
Information
Systems
Overview
STRIDE SlimLine industrial managed 16-port Ethernet switch, metal housing, operating temperature range of -40 to +75 deg. C, sixteen 10/100BaseT RJ45 Ethernet
ports. Redundant power inputs with surge and spike protection, auto-crossover, DIN
rail mounting. Supports Store and Forward wire speed switching and full-duplex with
flow control. UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and CE marked.
Programmable
Controllers
Dimensions
C-more &
other HMI
Field I/O
Software
2-Year Warranty
Drives
Inches [mm]
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
SE-SW16M
<--->
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
ACT/LNK/Speed LED
This is a bi-color (green / yellow) LED on
models with one LED per RJ45 port.
Indicates that there is a proper Ethernet
ON Solid
connection (Link) between the port and
(not flashing) another Ethernet device, but no
communications activity is detected.
Flashing
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
Green
A 100 Mbps (100BaseT) connection is
detected.
Yellow
A 10 Mbps (10BaseT) connection is
detected.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
Pushbuttons/
Lights
Specifications
Process
The following are specifications relevant to
the SE-SW16M 16-port Ethernet switch.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
Relays/
Timers
Comm.
7W
Terminal
Blocks &
Wiring
12 oz (0.34 kg)
Power
5.0 lb-in (0.57 Nm)
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-13
Part #
Index
Stride Managed Industrial Ethernet Switches
®
Specifications for SE-SW16M
Copper RJ45 Ports:
General Specifications
Ethernet switch type
Operating mode
Devices supported
Ethernet compliance
Ethernet protocols
supported
Industrial protocols
supported
MAC addresses
Memory bandwidth
Industrial Ethernet managed switch with 16 ports
Store and forward wire speed switching, non-blocking.
Broadcast and multicast storm protection
All IEEE 802.3 compliant devices are supported
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
IEEE 802.3x (Full-Duplex with Flow Control)
IEEE 802.1D/w (Rapid Spanning Tree for redundant rings
and Spanning Tree for interoperability)
IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS)
IEEE 802.1Q (VLAN for traffic segregation)
IEEE 802.3ab/z
SNMPv1 / v2 / v3, RMON, DHCP, SNTP, TFTP, STP, RSTP,
QoS / CoS / ToS / DS, IGMPv1 / v2,
VLAN (tag and port based),
HTTP, HTTPS (SSL and TSL), Telnet, SSH and more
Environmental Air
Vibration and shock
Agency Approvals
EMI emissions
EMC immunity
Eye safety (fiber models)
RoHS and WEEE
Packaging and protection
Shielded RJ45 10/100 fully 802.3 compliant
RJ45 speed and duplex
Configurable or 10/100 auto-negotiating
Auto-mdi / mdix-crossover automatically supports
either straight or crossed cables
Auto-polarity for automatic correction of crossed
TXD and RXD pairs
Full or half duplex operation with flow control
supported on all ports
MDI / MDIX
Polarity
Modes
Console ports: USB and RS232 (RJ45)
Management interfaces
Text (Telnet and SSH), CLI (command line interface) and
SNMP (see the user manual for supported MIBs)
Console ports are located on the bottom surface of the switch.
Modbus / TCP, EtherNet / IP, PROFInet,
Foundation Fieldbus HSE and others
8192 addresses
32 Gbps
10M ports 16 µs + frame time
100M ports 5 µs + frame time
Latency (typical)
Power input (typical - all
ports active at 100 Mbps)
Redundant input terminals
Input voltage
Reverse power protection
“OK” output
Indicates power and
operational status
Transient protection
Spike protection
Ethernet isolation
Operating temperature
range
Storage temperature range
Humidity (non-condensing)
RJ45 ports
7W
10-30 VDC (continuous) - Class 2 Power Supply
Yes
Voltage same as switch input voltage
Maximum current output 0.5 Amp
15,000 watts peak
5,000 watts (10x for 10 µS)
1500 VRMS 1 minute
-40 to +75°C (cold startup at -40°C),
-40 to +167°F (cold startup at -40°F)
-40 to +85 °C (-40 to +185 °F)
5 to 95% RH
For use in Pollution Degree 2 environment.
No corrosive gases permitted
IEC60068-2-6, -27 and -32
Electrical safety: UL1604 (Class 1, Div 2, Group A, B, C,
D) E200031 CSA C22.2/14; EN61010-1, CE Marine and
offshore rated per ABS
FCC part 15, ICES-003, EN55022
IEC61000-6-2, CE
IEC60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
RoHS and WEEE compliant
Aluminum case; IP30
Volume 14
e28-14
Communication Products
1 - 80 0 - 633 - 0405
Stride Managed Industrial Ethernet Switches
®
8-Port Gigabit Managed Ethernet Switch
Systems
Overview
Programmable
Controllers
STRIDE™ SlimLine industrial managed 8-port Ethernet switch with all Gigabit ports,
metal housing, operating temperature range of -40 to +75 deg. C, eight
10/100/1000BaseT RJ45 Ethernet ports and four advanced combination SFP ports.
Redundant power inputs with surge and spike protection, auto-crossover, DIN rail
mounting. Supports Store and Forward wire speed switching and full-duplex with flow
control. UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and CE marked. Optional
SFP modules sold separately.
Dimensions
Company
Information
Field I/O
Software
C-more &
other HMI
2-Year Warranty
Drives
Soft
Starters
Inches [mm]
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
SE-SW8MG-4P
<--->
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
ACT/LNK/Speed LED
This is a bi-color (green / yellow) LED on
models with one LED per RJ45 port.
Indicates that there is a proper Ethernet
ON Solid
connection (Link) between the port and
(not flashing) another Ethernet device, but no
communications activity is detected.
Flashing
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
Green
A 100 Mbps (100BaseT) connection is
detected.
Yellow
A 10 Mbps (10BaseT) connection is
detected.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
Relays/
Timers
Specifications
Comm.
The following are specifications relevant to
the SE-SW8MG-4P 8-port Ethernet switch.
Terminal
Blocks &
Wiring
Input power (typical
12W with no fiber transceivers
with all ports active 15W
with four fiber transceivers
at 100 Mbps)
12 oz (0.34 kg)
Weight
Power connector
5.0 lb-in (0.57 Nm)
max. screw torque
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-15
Part #
Index
®
Managed Industrial Ethernet Switches
Specifications for SE-SW8MG-4P
Copper RJ45 Ports: Gigabit
General Specifications
Ethernet switch type
Operating mode
Devices supported
Ethernet compliance
Ethernet protocols
supported
Industrial protocols
supported
MAC addresses
Memory bandwidth
Latency (typical)
Power input
Redundant input terminals
Input voltage
Reverse power protection
“OK” output
Indicates power and
operational status
Transient protection
Spike protection
Ethernet isolation
Operating temperature
range
Storage temperature range
Humidity (non-condensing)
Environmental Air
Vibration and shock
Agency Approvals
EMI emissions
EMC immunity
RoHS and WEEE
Packaging and protection
8-Port Managed, All ports 10/100/1000
Store and forward wire speed switching, non-blocking.
Broadcast and multicast storm protection
All IEEE 802.3 compliant devices are supported
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
IEEE 802.3x (Full-Duplex with Flow Control)
IEEE 802.1D/w (Rapid Spanning Tree for redundant rings
and Spanning Tree for interoperability)
IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS)
IEEE 802.1Q (VLAN for traffic segregation)
IEEE 802.3ab/z
SNMPv1 / v2 / v3, RMON, DHCP, SNTP, TFTP, STP, RSTP,
QoS / CoS / ToS / DS, IGMPv1 / v2,
VLAN (tag and port based),
HTTP, HTTPS (SSL and TSL), Telnet, SSH and more
Modbus / TCP, EtherNet / IP, PROFInet,
Foundation Fieldbus HSE and others
8192 addresses
32 Gbps
< 5 us + frame time
12 W (with no fiber transceivers);
15 W (with four fiber transceivers)
10-30 VDC (continuous) - Class 2 Power Supply
Yes
RJ45 ports
Eight RJ45 10/100/1000 fully 802.3z compliant
Note Four ports are combination Gigabit ports that have both
a RJ45 connector and SFP cage. For each of these ports only
one connector can be used at a time.
RJ45 speed
and duplex
Configurable or 10/100/100 auto-detecting for
speed and duplex (full or half)
RJ45 MDI / MDIX
RJ45 Polarity
Modes
Auto-mdi / mdix-crossover automatically supports either
straight or crossed cables
Auto-polarity for automatic correction of crossed
TXD and RXD pairs
Full or half duplex operation with flow control
supported on all ports
SFP
SFP (pluggable) ports accept Mini-GBIC (SFP) transceivers
with a speed of 1000Mbps or 100Mbps
See separate datasheet for optional fiber transceiver specifications
Console ports: USB and RS232 (RJ45)
Management interfaces
Text (Telnet and SSH), CLI (command line interface) and
SNMP (see the user manual for supported MIBs)
Voltage same as switch input voltage
Maximum current output 0.5 Amp
15,000 watts peak
5,000 watts (10x for 10 uS)
1500 VRMS 1 minute
-40 to +75°C (cold startup at -40°C),
-40 to +167°F (cold startup at -40°F)
-40 to +85 °C (-40 to +185 °F)
5 to 95% RH
For use in Pollution Degree 2 environment.
No corrosive gases permitted
IEC60068-2-6, -27 and -32
Electrical safety: UL1604 (Class 1, Div 2, Group A, B, C,
D) E200031 CSA C22.2/14; EN61010-1, CE Marine and
offshore rated per ABS
FCC part 15, ICES-003, EN55022
EMC: FCC part 15, ICES-003; EN55022,
EN61000-6-2/4, CE
RoHS and WEEE compliant
Corrosion-resistant aluminum case;
IP40 protection from dust and debris
Volume 14
e28-16
Communication Products
1 - 80 0 - 633 - 0405
Stride Managed Industrial Ethernet Switches
®
10-Port Gigabit Managed Ethernet Switch
Systems
Overview
Programmable
Controllers
STRIDE SlimLine industrial managed 10-port Ethernet switch with Gigabit ports, metal
housing, operating temperature range of -40 to +75 deg. C, seven 10/100BaseT
RJ45 Ethernet ports, one Gigabit RJ45 port and two Gigabit advanced combination
SFP ports. Redundant power inputs with surge and spike protection, auto-crossover,
DIN rail mounting. Supports Store and Forward wire speed switching and full-duplex
with flow control. UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and CE marked.
Optional SFP modules sold separately
Dimensions
Company
Information
Field I/O
Software
C-more &
other HMI
2-Year Warranty
Drives
Soft
Starters
Inches [mm]
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
SE-SW10MG-2P
<--->
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
ACT/LNK/Speed LED
This is a bi-color (green / yellow) LED on
models with one LED per RJ45 port.
Indicates that there is a proper Ethernet
ON Solid
connection (Link) between the port and
(not flashing) another Ethernet device, but no
communications activity is detected.
Flashing
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
Green
A 100 Mbps (100BaseT) connection is
detected.
Yellow
A 10 Mbps (10BaseT) connection is
detected.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
Relays/
Timers
Specifications
Comm.
The following are specifications relevant to
the SE-SW10MG-2P 10-port Ethernet
switch.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
Terminal
Blocks &
Wiring
Power
5W (no fiber)
7W (with 2 fiber ports)
Circuit
Protection
Enclosures
12 oz (0.34 kg)
5.0 lb-in (0.57 Nm)
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-17
Part #
Index
®
Managed Industrial Ethernet Switches
Specifications for SE-SW10MG-2P
Copper RJ45 Ports: (10/100BaseT)
General Specifications
Ethernet switch type
Operating mode
Devices supported
Ethernet compliance
Ethernet protocols
supported
Industrial protocols
supported
MAC addresses
Memory bandwidth
Latency (typical)
Power input
Redundant input terminals
Input voltage
Reverse power protection
“OK” output
Indicates power and
operational status
Transient protection
Spike protection
Ethernet isolation
Operating temperature
range
Storage temperature range
Humidity (non-condensing)
Environmental Air
Vibration and shock
Agency Approvals
EMI emissions
EMC immunity
RoHS and WEEE
Packaging and protection
10-Port Managed, three ports are Gigabit Ethernet seven
ports are 10/100
Store and forward wire speed switching, non-blocking.
Broadcast and multisorm protection
All IEEE 802.3 compliant devices are supported
IEEE 802.3 (10Mbps Ethernet supports legacy devices)
IEEE 802.3u (Fast Ethernet 100Mbps for newer devices)
IEEE 802.3x (Full-Duplex with Flow Control)
IEEE 802.1D/w (Rapid Spanning Tree for redundant rings
and Spanning Tree for interoperability)
IEEE 802.1p (Priority Queuing – QoS, CoS, ToS/DS)
IEEE 802.1Q (VLAN for traffic segregation)
IEEE 802.3ab/z
10/100 RJ45 ports
10/100 RJ45 speed
and duplex
Seven RJ45 10/100 ports fully IEEE 802.3 compliant
Configurable or 10/100 auto-detecting for
speed and duplex (full or half)
Auto-mdi / mdix-crossover automatically supports either
straight or crossed cables
Auto-polarity for automatic correction of crossed
TXD and RXD pairs
Full or half duplex operation with flow control
supported on all ports
RJ45 MDI / MDIX
RJ45 Polarity
Modes
Copper RJ45 Ports: Gigabit
SNMPv1 / v2 / v3, RMON, DHCP, SNTP, TFTP, STP, RSTP,
QoS / CoS / ToS / DS, IGMPv1 / v2,
VLAN (tag and port based),
HTTP, HTTPS (SSL and TSL), Telnet, SSH and more
RJ45 ports
Three RJ45 10/100/1000 fully 802.3z compliant
Note: Two ports are combination Gigabit ports that have both
a RJ45 connector and SFP cage. For each of these ports only
one connector can be used at a time.
Modbus / TCP, EtherNet / IP, PROFInet,
Foundation Fieldbus HSE and others
RJ45 speed
and duplex
Configurable or 10/100/1000 auto-detecting for
speed and duplex (full or half)
8192 addresses
32 Gbps
< 5 µs + frame time
5 W (with no fiber transceivers);
7 W (with two fiber transceivers)
RJ45 MDI / MDIX
RJ45 Polarity
Modes
10-30 VDC (continuous) - Class 2 Power Supply
Yes
Voltage same as switch input voltage
Maximum current output 0.5 Amp
15,000 watts peak
5,000 watts (10x for 10 µS)
1500 VRMS 1 minute
-40 to +75°C (cold startup at -40°C),
-40 to +167°F (cold startup at -40°F)
-40 to +85 °C (-40 to +185 °F)
5 to 95% RH
For use in Pollution Degree 2 environment.
No corrosive gases permitted
IEC60068-2-6, -27 and -32
Auto-mdi / mdix-crossover automatically supports either
straight or crossed cables
Auto-polarity for automatic correction of crossed
TXD and RXD pairs
Full or half duplex operation with flow control
supported on all ports
SFP Ports
SFP (pluggable) ports accept Mini-GBIC (SFP) transceivers
with a speed of 1000Mbps or 100Mbps
See separate datasheet for optional fiber transceiver specifications
Console ports: USB and RS232 (RJ45)
Management interfaces
Text (Telnet and SSH), CLI (command line interface) and
SNMP (see the user manual for supported MIBs)
Console ports are located on the bottom surface of the switch.
Electrical safety: UL1604 (Class 1, Div 2, Group A, B, C,
D) E200031 CSA C22.2/14; EN61010-1, CE Marine and
offshore rated per ABS
FCC part 15, ICES-003, EN55022
EMC: FCC part 15, ICES-003; EN55022,
EN61000-6-2/4, CE
RoHS and WEEE compliant
Corrosion-resistant aluminum case;
IP40 protection from dust and debris
Volume 14
e28-18
Communication Products
1 - 80 0 - 633 - 0405
www.automationdirect.com
More than just a great online store
In addition to our printed catalog, we have an online network of information available 24/7.
FREE videos, FREE software, FREE documentation, FREE support, FREE magazine . . .
. . . well you get the point. :-)
CAD drawings
downloads
www.automationdirect.com/CAD
LIVE
webinars
from our
studios
Automation
Notebook
e-magazine
www.automationnotebook.com
www.automationtalk.com
www.automationdirect.com/microsites
In-depth product
sites with detailed
information
Software
downloads
support.automationdirect.com/downloads.html
Online Tech
support
support.automationdirect.com
about.automationdirect.com
In-depth
company
information,
history, and
core values
On demand,
pre-recorded learn.automationdirect.com
video tutorials
www.automationdirect.com/enews
e-newsletter
24/7
shopping
www.automationdirect.com
Documentation
downloads
www.automationdirect.com/docs
“Very, very thorough site;
one of the best industrial sites we’ve reviewed”
IEN magazine March 2009
In addition to our main Web site,
www.automationdirect.com,
we have a whole network of support
sites to help you quickly and
efficiently choose and use
the automation products
you need.
Stride Unmanaged Industrial Ethernet
Switches & Media Converter
®
Unmanaged Switches offer
Deterministic Control
Increased Reliability
The Stride unmanaged switches automatically determine and
remember where each Ethernet device is located and route
messages only through the appropriate port. This gives devices on
the network an open communications channels and helps minimizes network loading. Another benefit is the 10/100 auto-speed
selection that enhances the performance of 10 Mpbs Ethernet
devices by speeding up their message transmissions to 100 Mbps
when they are passed to a faster Ethernet backbone.
The Stride Ethernet switches have been designed for the industrial
environment. They will survive extreme temperatures, as well as
dirty, unreliable industrial power. Meeting UL 1604 (Class I Div. 2),
and the IEC68-2 standard for vibration resilience, the Stride
switches will provide years of reliable performance in applications
too tough for commercial grade switches.
Simple Installation
With no user setup required, the Stride unmanaged switches and
media converters will immediately start operating as soon as you
power them up and connect them to the network.
Unmanaged Switches
Mounting Options: Snaps to standard
35mm x 7.5mm height DIN rail (EN50022).
The (-WT) metal housing versions also
offer various mounting options.
Fiber LED to indicate a proper connection
for the fiber connectors and network
activity.
Fiber Optic Port on selected
models. Multi-mode fiber optic
port with ST or SC type connector
that supports half and full duplex
with a maximum distance of 4km.
Activity, Link and Speed LEDs
are integrated into the RJ45 ports.
RJ45 Ports that are fully IEEE 802.3
compliant with 10/100 autodetecting for speed and duplex
(full or half).
Auto crossover (MDI/MDIX)
automatically supports either
straight or crossed cables which
greatly reduces cable installation
errors.
Redundant Power Inputs
Dual power inputs with industrial surge
and spike protection help reduce down
time when there is primary power loss.
Reverse power protection is also
supported.
Power LED to indicate power
on P1 or P2 power inputs.
DIN Rail Mount
Snaps to standard 35mm x 7.5mm
height DIN rail (EN50022).
Industrial Temperature Ranges
Plastic Models:
-10 to +60 °C (+14 to +140 °F) operating
temperature range
Metal Models (-WT):
-40 to +85 °C (-40 to +185 °F) operating
temperature range. 5 to 95% RH humidity
range (non-condensing).
Agency Approvals:
UL1604, CSA C22.2/213 (Class I, Div.2)
EN50021/EN60079-15
Model SE-SW5U-ST-WT shown above. For detailed specifications on all models, see following pages
Volume 14
e28-20
Communication Products
1 - 80 0 - 633 - 0405
®
Unmanaged Switches Selection Guide
At a glance...
Wide Temperature Range
Standard Temperature Range
Part Number
Description
Price
Part Number
Description
Price
STRIDE ™ SlimLine Industrial Unmanaged Ethernet
Switch, plastic case, -10 to +60 °C operating
temperature range, five 10/100BaseT RJ45 Ethernet
ports. Redundant power inputs with surge and spike
protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching and
full-duplex with flow control. UL/CUL1604 (Class I,
Div. 2, Groups A, B, C, D) and CE marked.
STRIDE ™ SlimLine Industrial Unmanaged Ethernet
Switch, metal case, wide operating temperature range
-40 to +85 °C, five 10/100BaseT RJ45 Ethernet ports.
Redundant power inputs with surge and spike protection, auto-crossover, DIN rail mounting. Supports
Store and Forward wire speed switching and
full-duplex with flow control. UL/CUL1604 (Class I,
Div. 2, Groups A, B, C, D) and CE marked.
<--->
STRIDE ™ SlimLine Industrial Unmanaged Ethernet
Switch, plastic case, -10 to +60 °C operating
temperature range, eight 10/100BaseT RJ45 Ethernet
ports. Redundant power inputs with surge and spike
protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching and
full-duplex with flow control. UL/CUL1604 (Class I,
Div. 2, Groups A, B, C, D) and CE marked.
<--->
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
STRIDE ™ SlimLine Industrial Unmanaged Ethernet
Switch, metal case, wide operating temperature range
-40 to + 85 °C, eight 10/100BaseT RJ45 Ethernet
ports. Redundant power inputs with surge and spike
protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching
and full-duplex with flow control. UL/CUL1604 (Class
I, Div. 2, Groups A, B, C, D) and CE marked.
<--->
SE-SW5U-ST
SE-SW5U-ST-WT utilizes ST fiber ports
SE-SW5U-ST-WT
SE-SW5U-SC
SE-SW5U-SC-WT utilizes SC fiber ports
SE-SW5U-SC-WT SE-SW5U-SC-WT utilizes SC fiber ports
STRIDE ™ SlimLine Industrial Unmanaged Ethernet
Switch, plastic case, -10 to +60 °C operating
temperature range, four 10/100BaseT RJ45 Ethernet
ports and one multimode 100BaseFX ST or SC fiber
port. Redundant power inputs with surge and spike
protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching and
full-duplex with flow control. UL/CUL1604 (Class I,
Div. 2, Groups A, B, C, D) and CE marked.
Programmable
Controllers
Software
SE-SW8U-WT
SE-SW8U
Systems
Overview
Field I/O
SE-SW5U-WT
SE-SW5U
Company
Information
<--->
SE-SW9U-ST
SE-SW9U-ST utilizes ST fiber ports
SE-SW9U-ST-WT
SE-SW9U-SC
SE-SW9U-SC utilizes SC fiber ports
SE-SW9U-SC-WT SE-SW9U-SC-WT utilizes SC fiber ports
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
SE-SW5U-ST-WT utilizes ST fiber ports
Encoders
STRIDE ™ SlimLine Industrial Unmanaged Ethernet
Switch, metal case, wide operating temperature range
-40 to + 85 °C, four 10/100BaseT RJ45 Ethernet
ports and one multimode 100BaseFX ST or SC fiber
port. Redundant power inputs with surge and spike
protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching
and full-duplex with flow control. UL/CUL1604 (Class
I, Div. 2, Groups A, B, C, D) and CE marked.
<--->
Steppers/
Servos
<--->
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
SE-SW9U-ST-WT utilizes ST fiber ports
Process
Relays/
Timers
STRIDE ™ SlimLine Industrial Unmanaged Ethernet
Switch, plastic case, -10 to +60 °C operating
temperature range, eight 10/100BaseT RJ45 Ethernet
ports and one multimode 100BaseFX ST or SC fiber
port. Redundant power inputs with surge and spike
protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching and
full-duplex with flow control. UL/CUL1604 (Class I,
Div. 2, Groups A, B, C, D) and CE marked.
SE-MC2U-ST
SE-SW2U-ST utilizes ST fiber ports
SE-MC2U-SC
SE-SW2U-SC utilizes SC fiber ports
STRIDE ™ SlimLine Industrial Unmanaged Ethernet
Media Converter, plastic case, -10 to +60 °C
operating temperature range, one 10/100BaseT autodetecting, auto-crossover and auto-polarity RJ45
Ethernet port and one multimode 100BaseFX ST or
SC fiber port. Redundant power inputs with surge and
spike protection, DIN rail mounting. Supports Store
and Forward wire speed switching and full-duplex
with flow control. UL/CUL1604 (Class I, Div. 2,
Groups A, B, C, D) and CE marked.
STRIDE ™ SlimLine Industrial Unmanaged Ethernet
Switch, metal case, wide operating temperature range
-40 to + 85 °C, eight 10/100BaseT RJ45 Ethernet
ports and one multimode 100BaseFX ST or SC fiber
port. Redundant power inputs with surge and spike
protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching
and full-duplex with flow control. UL/CUL1604 (Class
I, Div. 2, Groups A, B, C, D) and CE marked.
<--->
<--->
NOTE: -WT models have a metal case and are rated for
a wider temperature range from -40 ° to 85 °C.
<--->
All part numbers are rated Class I, Div 2.
C
UL
R
US
Electrical Safety
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
European
Directives
RoHS
Pneumatics
Safeety
Appendix
Product
Index
US Emissons WEEE Compliant RoHS Compliant
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Volume 14
Communication Products
e28-21
Part #
Index
Stride Unmanaged Industrial Ethernet
Switches & Media Converter
®
General Specifications
Up to 9 ports
Ethernet switch type
Store and forward wire speed switching, non-blocking
Operating mode
All IEEE 802.3 compliant devices are supported
Devices supported
IEEE 802.3, 802.3u, 802.3x
Standards
1024 addresses
MAC addresses
3.2 Gbps
Memory bandwidth
16 us + frame time (typical)
Latency for 10 Mbps ports
5 us + frame time (typical)
Latency for 100 Mbps ports
Redundant Input Terminals
Power input
Input power
(typical with all ports
active at 100 Mbps)
Input voltage
Reverse power protection
Transient protection
Spike protection
Ethernet isolation
Operating temperature
range
Storage temperature range
Humidity (non-condensing)
Environmental Air
Vibration, shock & freefall
Agency Approvals
EMI emissions
EMC immunity
RoHS and WEEE
Environmental Air
SE-MC2U-ST
SE-MC2U-SC
2.0 W
SE-SW5U
SE-SW5U-WT
SE-SW5U-ST
SE-SW5U-SC
3.0 W
SE-SW5U-ST-WT
SE-SW5U-SC-WT
SE-SW8U
4.0 W
SE-SW8U-WT
SE-SW9U-ST
SE-SW9U-SC
5.0 W
SE-SW9U-ST-WT
SE-SW9U-ST-WC
10-30 VDC (continuous) - Class 2 Power Supply
Yes
15,000 watts peak
5,000 watts (10x for 10 uS)
1500 VRMS 1 minute
SE-MC2U-ST
SE-MC2U-SC
SE-SW5U
SE-SW8U
-10 to +60 °C (+14 to +140 °F),
SE-SW5U-ST
cold startup at -10 °C (+14 °F)
SE-SW5U-SC
SE-SW9U-ST
SE-SW9U-SC
SE-SW5U-WT
SE-SW8U-WT
SE-SW5U-ST-WT
-40 to +85 °C (-40 to +185 °F),
SE-SW5U-SC-WT
cold startup at -40 °C (-40 °F)
SE-SW9U-ST-WT
SE-SW9U-SC-WT
-40 to +85 °C (-40 to +185 °F)
5 to 95% RH
No corrosive gasses permitted
IEC68-2-6, -27, -32
UL/cUL 508, CSA C22 per EN61010-1,
UL/cUL 1604 (Class 1, Div. 2, Groups A, B, C, D),
CSA C 22.2/213 9 per EN50021/EN60079-15
(Zone 2, Category 3), CE (ATEX)
FCC part 15, ICES-003, EN55022
IEC61326-1
RoHS (Pb free) and WEEE compliant
For use in Pollution Degree 2 environment
Complete documentation
General Specifications Cont’d
Packaging and
protection
Dimensions (L x W x H)
SE-MC2U-ST
SE-MC2U-SC
SE-SW5U
SE-SW8U
UL94VO Lexan, IP30
SE-SW5U-ST
SE-SW5U-SC
SE-SW9U-ST
SE-SW9U-SC
SE-SW5U-WT
SE-SW8U-WT
SE-SW5U-ST-WT
Aluminum IP30
SE-SW5U-SC-WT
SE-SW9U-ST-WT
SE-SW9U-SC-WT
See mechanical diagrams for details
Copper RJ45 Ports: (10/100BaseT)
10/100BaseT ports
Protocols supported
Ethernet compliancy
Auto-crossover
Auto-sensing operation
Auto-negotiating
Auto-polarity
Flow control
Ethernet isolation
Plug and play
Cable requirements
Max. cable distance
Shielded RJ45
All standard IEEE 802.3
IEEE 802.3, 802.3u, 802.3x
Yes, allows you to use straight-through or crossover wired
cables
Yes, Full and half duplex
Yes, 10BaseT and 100BaseT
Yes, on the TD and RD pair
Automatic
1500 VRMS 1 minute
Yes
Twisted pair (Cat. 5 or better) (shielded recommended)
100 meters
Fiber Port: (100BaseFX multimode)
100BaseFX ports
Fiber port mode
Fiber port connector
Optimal fiber cable
Center wavelength
Multimode
Nominal max. distance
(full duplex)
Half and full duplex
Ethernet compliance
Eye safety (laser)
1
Multimode (mm)
ST – models SE-XXXX-ST and SE-XXXX-ST-WT
SC – models SE-XXXX-SC and SE-XXXX-SC-WT
50/125 or 62.5/125 µm
1300 nm
Links up to 4 km typ.; 1300 nm;
use with 50 or 62.5/125 um fiber
> Transmitter power (dB): -21 min, -17 typ, -14 max
> Receiver sensitivity (dB): -34 typ, -31 max
4 km
Full duplex
100BaseFX
IEC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
Documentation can be downloaded from
www.automationdirect.com.
Volume 14
e28-22
Communication Products
1 - 80 0 - 633 - 0405
Unmanaged Industrial Ethernet
Switches & Media Converter
Company
Information
®
Installation
DIN Rail Mounting: Plastic Case
DIN rail mounting steps:
1. Hook top back of unit over the DIN rail.
2. Push bottom back onto the DIN rail until it snaps into place.
DIN rail removal steps:
A. Insert screwdriver into DIN clip and pry until it releases from
the DIN rail.
B. Unhook top of unit from DIN rail.
Mounting
DIN rail mounting steps:
1. Hook top back of unit over the DIN rail.
2. Push bottom back onto the DIN rail until it snaps into place.
DIN rail removal steps:
A. Push the unit down to free the bottom of the DIN rail.
B. Rotate the bottom of the unit away from the DIN rail.
C. Unhook top of unit from DIN rail.
Removal
B
1
Programmable
Controllers
DIN Rail Mounting: Metal Case
Mounting
Removal
Systems
Overview
1
C
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
A
Motor
Controls
Proximity
Sensors
B
2
Field I/O
Photo
Sensors
2
A
Limit
Switches
Encoders
Optional Mounting
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Vertical screw to panel mount.
Flat screw to panel mount.
For a low profile orientation in shallow boxes plus the best shock
and vibration resistance.
For better shock and vibration resistance
(Metal cased models only)
Power wiring
Maximum power
terminal screw
torque is
5.0 lb-in (0.57Nm).
+ –
One DC Supply
Chassis
GND
(panel)
Wire Size Range
24 – 12 AWG
10-30 VDC
Power
Circuit
Protection
P2 P1
+ –
+ –
Enclosures
Chassis
GND
(panel)
Tools
Pneumatics
Dual DC Supplies
Safeety
Appendix
A recommended DC power supply is
AutomationDirect.com Part number PSC-24-015.
The power connection terminal block is
removable for access to the mounting tab.
Comm.
Terminal
Blocks &
Wiring
Redundant DC Power
Single DC Power
P2 P1
ST or SC Fiber Connector
Relays/
Timers
ST type
Connector
Product
Index
SC type
Connector
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-23
Part #
Index
Stride Unmanaged Industrial Ethernet
Switches
®
5-Port Ethernet Switch - Plastic Case
STRIDE SlimLine Industrial Unmanaged Ethernet Switch, plastic case, -10 to +60 °C
operating temperature range, five 10/100BaseT RJ45 Ethernet ports. Redundant power
inputs with surge and spike protection, auto-crossover, DIN rail mounting. Supports Store
and Forward wire speed switching and full-duplex with flow control. UL/CUL1604 (Class
I, Div. 2, Groups A, B, C, D) and CE marked.
Dimensions
Inches [mm]
5 Port – SE-SW5U
Removable
Screw Block,
Phoenix
p/n 1757035
Snaps to standard
35 mm x 7.5 mm height
DIN rail (EN50022)
1.01
[25.7]
4.35
[110.5]
3.96
[100.6]
1.98
[50.3]
Dia. 0.15 [3.8]
Use for direct
panel mounting
to a flat surface.
1.01
[25.7]
ACT/LNK LED
This is the Yellow LED on models with a
Yellow and a Green LED per RJ45 port.
Indicates that there is a proper Ethernet
ON (yellow) connection (Link) between the port and
(not flashing) another Ethernet device, but no
Speed 10/100 LED
This is the Green LED on models with a
Yellow and a Green LED per RJ45 port.
ON (green)
A 100 Mbps (100BaseT) connection is
detected.
OFF
A 10 Mbps (10BaseT) connection is
detected.
communications activity is detected.
ON (yellow)
(flashing)
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
SE-SW5U
<--->
0.06
[1.5]
3.26
[82.8]
1.00
[25.4]
1.98
[50.3]
Specifications
The following are specifications relevant
to the SE-SW5U 5-Port Ethernet Switch.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
2.0 W
4 oz (0.11 kg)
5.0 lb-in (0.57 Nm)
Volume 14
e28-24
Communication Products
1 - 80 0 - 633 - 0405
Stride Unmanaged Industrial Ethernet
Switches
Company
Information
®
Systems
Overview
Programmable
Controllers
5-Port Ethernet Switch - Metal Case
STRIDE SlimLine Industrial Unmanaged Ethernet Switch, metal case, wide operating
temperature range -40 to +85 °C, five 10/100BaseT RJ45 Ethernet ports. Redundant
power inputs with surge and spike protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching and full-duplex with flow control.
UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and CE marked.
Field I/O
Software
C-more &
other HMI
Drives
Dimensions
Soft
Starters
Inches [mm]
Motors &
Gearbox
Steppers/
Servos
5 Port – SE-SW5U-WT
0.175
[4.4]
4.50
[114.3]
Removable
Screw Block,
Phoenix
p/n 1757035
4.00
4.35
[101.6] [110.5]
0.30
[7.6]
Snaps to standard
35 mm x 7.5 mm height
DIN rail (EN50022)
Dia. 0.175 [4.4]
Use for direct
panel mounting to
a flat surface with
up to #8 screw.
Removable
for direct panel
mounting
0.55
[14.0]
1.10
[27.9]
ACT/LNK LED
This is the Yellow LED on models with a
Yellow and a Green LED per RJ45 port.
Indicates that there is a proper Ethernet
ON (yellow) connection (Link) between the port and
(not flashing) another Ethernet device, but no
3.00
[76.2]
1.50
[3.81]
ON (yellow)
(flashing)
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
Proximity
Sensors
2.25
[57.1]
C
2.25
[57.1]
SE-SW5U-WT
<--->
This is the Green LED on models with a
Yellow and a Green LED per RJ45 port.
ON (green)
A 100 Mbps (100BaseT) connection is
detected.
OFF
A 10 Mbps (10BaseT) connection is
detected.
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
0.39
[9.9]
Speed 10/100 LED
communications activity is detected.
Motor
Controls
Temperature
Sensors
Pushbuttons/
Lights
Specifications
Process
The following are specifications relevant to
the SE-SW5U-WT 5-Port Ethernet Switch.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
2.0 W
6 oz (0.17 kg)
5.0 lb-in (0.57 Nm)
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safeety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-25
Part #
Index
Stride Unmanaged Industrial Ethernet
Switches
®
8-Port Ethernet Switch - Plastic Case
STRIDE SlimLine Industrial Unmanaged Ethernet Switch, plastic case, -10 to +60 °C
operating temperature range, eight 10/100BaseT RJ45 Ethernet ports. Redundant power
inputs with surge and spike protection, auto-crossover, DIN rail mounting. Supports Store
and Forward wire speed switching and full-duplex with flow control. UL/CUL1604 (Class
I, Div. 2, Groups A, B, C, D) and CE marked.
Dimensions
Inches [mm]
8 Port – SE-SW8U
Removable
Screw Block,
Phoenix
p/n 1757035
Snaps to standard
35 mm x 7.5 mm height
DIN rail (EN50022)
1.01
[25.7]
4.35
[110.5]
3.96
[100.6]
1.98
[50.3]
Dia. 0.15 [3.8]
Use for direct
panel mounting
to a flat surface.
1.01
[25.7]
1.50
[38.1]
ACT/LNK/Speed LED
This is a bi-color (green / yellow) LED on
models with one LED per RJ45 port.
Indicates that there is a proper Ethernet
ON Solid
connection (Link) between the port and
(not flashing) another Ethernet device, but no
communications activity is detected.
Flashing
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
Green
A 100 Mbps (100BaseT) connection is
detected.
Yellow
A 10 Mbps (10BaseT) connection is
detected.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
3.26
[82.8]
SE-SW8U
<--->
1.98
[50.3]
0.06
[1.5]
Specifications
The following are specifications relevant
to the SE-SW8U 8-Port Ethernet Switch.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
4.0 W
6 oz (0.17 kg)
5.0 lb-in (0.57 Nm)
Volume 14
e28-26
Communication Products
1 - 80 0 - 633 - 0405
Stride Unmanaged Industrial Ethernet
Switches
Company
Information
®
Systems
Overview
8-Port Ethernet Switch - Metal Case
Programmable
Controllers
STRIDE SlimLine Industrial Unmanaged Ethernet Switch, metal case, wide operating
temperature range -40 to + 85 °C, eight 10/100BaseT RJ45 Ethernet ports. Redundant
power inputs with surge and spike protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching and full-duplex with flow control.
UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and CE marked.
Field I/O
Software
C-more &
other HMI
Dimensions
Drives
Soft
Starters
Inches [mm]
Motors &
Gearbox
8 Port – SE-SW8U-WT
Removable
Screw Block,
Phoenix
p/n 1757035
0.175
[4.4]
4.00
[101.6]
4.35
[110.5]
4.50
[114.3]
0.30
[7.6]
Dia. 0.175 [4.4]
Use for direct
panel mounting to
a flat surface with
up to #8 screw.
Removable
for direct panel
mounting
1.60
[40.6]
0.80
[20.3]
3.00
[76.2]
Steppers/
Servos
Snaps to standard
35 mm x 7.5 mm height
DIN rail (EN50022)
1.50
[3.81]
Motor
Controls
2.25
[57.1]
Proximity
Sensors
C
SE-SW8U-WT
<--->
2.25
[57.1]
0.39
[9.9]
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
ACT/LNK/Speed LED
This is a bi-color (green / yellow) LED on
models with one LED per RJ45 port.
ON Solid
(not flashing)
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, but no
communications activity is detected.
Flashing
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
Green
A 100 Mbps (100BaseT) connection is
detected.
Yellow
A 10 Mbps (10BaseT) connection is
detected.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
Pushbuttons/
Lights
Specifications
Process
The following are specifications relevant to
the SE-SW8U-WT 8-Port Ethernet Switch.
Relays/
Timers
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
Terminal
Blocks &
Wiring
Comm.
4.0 W
Power
8 oz (0.23 kg)
Circuit
Protection
5.0 lb-in (0.57 Nm)
Enclosures
Tools
Pneumatics
Safeety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-27
Part #
Index
Stride Unmanaged Industrial Ethernet
Switches
®
5-Port Ethernet Switch with Fiber Port - Plastic Case
STRIDE SlimLine Industrial Unmanaged Ethernet Switch, plastic case,
-10 to +60 °C operating temperature range, four 10/100BaseT RJ45
Ethernet ports and one multimode 100BaseFX ST or SC fiber port.
Redundant power inputs with surge and spike protection, auto-crossover,
DIN rail mounting. Supports Store and Forward wire speed switching and
full-duplex with flow control. UL/CUL1604 (Class I, Div. 2, Groups A, B,
C, D) and CE marked.
Dimensions
Inches [mm]
5 Port with Fiber
SE-SW5U-ST and SE-SW5U-SC
Removable
Screw Block,
Phoenix
p/n 1757035
0.40
[10.2]
Snaps to standard
35 mm x 7.5 mm height
DIN rail (EN50022)
1.01
[25.7]
4.35
[110.5]
3.96
[100.6]
1.98
[50.3]
Dia. 0.15 [3.8]
Use for direct
panel mounting
to a flat surface.
1.01
[25.7]
3.26
[82.8]
1.00
[25.4]
ACT/LNK LED
This is the Yellow LED on models with two
LEDs per RJ45 port.
Indicates that there is a proper Ethernet
ON (yellow) connection (Link) between the port and
(not flashing) another Ethernet device, but no
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
with one ST type fiber port
SE-SW5U-SC
with one SC type fiber port
<--->
0.06
[1.5]
Speed 10/100 LED
This is the Green LED on models with two
LEDs per RJ45 port.
ON (green)
A 100 Mbps (100BaseT) connection is
detected.
OFF
A 10 Mbps (10BaseT) connection is
detected.
communications activity is detected.
ON (yellow)
(flashing)
1.98
[50.3]
SE-SW5U-ST
Fiber LED
Specifications
The following are specifications relevant
to the SE-SW5U-ST and SE-SW5U-SC
5-Port Ethernet Switches with Fiber Port.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
3.0 W
4 oz (0.11 kg)
5.0 lb-in (0.57 Nm)
This is the Green LED on the fiber optic
models.
Indicates that there is a proper fiber
ON (green)
connection (Link) between the port
(not flashing) and another fiber device, but no communications activity is detected.
ON (green)
(flashing)
Indicates that there is a proper fiber
connection (Link) between the port
and another fiber device, and that
there is communications activity.
OFF
Indicates that there is not a proper fiber
connection (Link) between the port and
another fiber device. Make sure the
fiber optic cable has been plugged
securely into the ports at both ends.
Volume 14
e28-28
Communication Products
1 - 80 0 - 633 - 0405
Stride Unmanaged Industrial Ethernet
Switches
Company
Information
®
Systems
Overview
5-Port Ethernet Switch with Fiber Port - Metal Case
Programmable
Controllers
STRIDE SlimLine Industrial Unmanaged Ethernet Switch, metal case,
wide operating temperature range -40 to + 85 deg C, four
10/100BaseT RJ45 Ethernet ports and one multimode 100BaseFX ST
or SC fiber port. Redundant power inputs with surge and spike protection, auto-crossover, DIN rail mounting. Supports Store and Forward
wire speed switching and full-duplex with flow control. UL/CUL1604
(Class I, Div. 2, Groups A, B, C, D) and CE marked.
Field I/O
Software
C-more &
other HMI
Drives
Dimensions
Soft
Starters
Inches [mm]
Motors &
Gearbox
Steppers/
Servos
5 Port with Fiber
SE-SW5U-ST-WT and SE-SW5U-SC-WT
Removable
Screw Block,
Phoenix
p/n 1757035
4.50
[114.3]
0.175
[4.4]
4.00
[101.6]
0.30
[7.6]
0.40
[10.2]
4.35
[110.5]
Proximity
Sensors
Dia. 0.175 [4.4]
Use for direct
panel mounting to
a flat surface with
up to #8 screw.
2.25
[57.1]
C
Removable
for direct panel
mounting
1.10
[27.9]
Motor
Controls
Snaps to standard
35 mm x 7.5 mm height
DIN rail (EN50022)
0.55
[14.0]
3.00
[76.2]
ACT/LNK LED
1.50
[3.81]
2.25
[57.1]
SE-SW5U-ST-WT SE-SW5U-SC-WT
with one ST type fiber port
with one SC type fiber port
<--->
Indicates that there is a proper Ethernet
ON (green)
communications activity is detected.
ON (yellow)
(flashing)
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
OFF
A 100 Mbps (100BaseT) connection is
detected.
A 10 Mbps (10BaseT) connection is
detected.
Fiber LED
ON (green)
(not flashing)
ON (green)
(flashing)
Indicates that there is a proper fiber
connection (Link) between the port
and another fiber device, and that
there is communications activity.
OFF
Indicates that there is not a proper fiber
connection (Link) between the port and
another fiber device. Make sure the
fiber optic cable has been plugged
securely into the ports at both ends.
Specifications
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
3.0 W
6 oz (0.17 kg)
5.0 lb-in (0.57 Nm)
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safeety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Current
Sensors
Pushbuttons/
Lights
This is the Green LED on the fiber optic
models.
Indicates that there is a proper fiber
connection (Link) between the port
and another fiber device, but no communications activity is detected.
Encoders
Temperature
Sensors
This is the Yellow LED on models with two This is the Green LED on models with two The following are specifications relevant to
LEDs per RJ45 port.
LEDs per RJ45 port adjacent to the fiber port. the SE-SW5U-ST-WT and SE-SW5U-SC-WT
5-Port Ethernet Switches with Fiber Port.
ON (yellow) connection (Link) between the port and
(not flashing) another Ethernet device, but no
Limit
Switches
Pressure
Sensors
0.39
[9.9]
Speed 10/100 LED
Photo
Sensors
Communication Products
e28-29
Part #
Index
Stride Unmanaged Industrial Ethernet
Switches
®
9-Port Ethernet Switch with Fiber Port - Plastic Case
STRIDE SlimLine Industrial Unmanaged Ethernet Switch, plastic
case, -10 to +60 °C operating temperature range, eight
10/100BaseT RJ45 Ethernet ports and one multimode
100BaseFX ST or SC fiber port. Redundant power inputs with
surge and spike protection, auto-crossover, DIN rail mounting.
Supports Store and Forward wire speed switching and full-duplex
with flow control. UL/CUL1604 (Class I, Div. 2, Groups A, B, C,
D) and CE marked.
Dimensions
Inches [mm]
Removable
Screw Block,
Phoenix
p/n 1757035
9 Port with Fiber
SE-SW9U-ST and SE-SW9U-SC
0.40
[10.2]
Snaps to standard
35 mm x 7.5 mm height
DIN rail (EN50022)
1.01
[25.7]
4.35
[110.5]
3.96
[100.6]
SE-SW9U-ST
with one ST type fiber port
1.98
[50.3]
Dia. 0.15 [3.8]
Use for direct
panel mounting
to a flat surface.
1.01
[25.7]
ACT/LNK/Speed LED
This is a bi-color (green / yellow) LED on
models with one LED per RJ45 port.
Indicates that there is a proper Ethernet
ON Solid
connection (Link) between the port and
(not flashing) another Ethernet device, but no
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
Green
A 100 Mbps (100BaseT) connection is
detected.
Yellow
A 10 Mbps (10BaseT) connection is
detected.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
<--->
1.98
[50.3]
Fiber LED
This is the Green LED on the fiber optic
models.
Indicates that there is a proper fiber
ON (green)
connection (Link) between the port
(not flashing) and another fiber device, but no communications activity is detected.
communications activity is detected.
Flashing
with one SC type fiber port
0.06
[1.5]
3.26
[82.8]
1.50
[38.1]
SE-SW9U-SC
ON (green)
(flashing)
Indicates that there is a proper fiber
connection (Link) between the port
and another fiber device, and that
there is communications activity.
OFF
Indicates that there is not a proper fiber
connection (Link) between the port and
another fiber device. Make sure the
fiber optic cable has been plugged
securely into the ports at both ends.
Specifications
The following are specifications relevant
to the SE-SW9U-ST and SE-SW9U-SC
9-Port Ethernet Switches with Fiber Port.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
5.0 W
6 oz (0.17 kg)
5.0 lb-in (0.57 Nm)
Volume 14
e28-30
Communication Products
1 - 80 0 - 633 - 0405
Stride Unmanaged Industrial Ethernet
Switches
Company
Information
®
Systems
Overview
9-Port Ethernet Switch with Fiber Port - Metal Case
Programmable
Controllers
STRIDE SlimLine Industrial Unmanaged Ethernet Switch,
metal case, wide operating temperature range -40 to + 85
°C , eight 10/100BaseT RJ45 Ethernet ports and one multimode 100BaseFX ST or SC fiber port. Redundant power
inputs with surge and spike protection, auto-crossover, DIN
rail mounting. Supports Store and Forward wire speed
switching and full-duplex with flow control. UL/CUL1604
(Class I, Div. 2, Groups A, B, C, D) and CE marked.
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Dimensions
Steppers/
Servos
Motor
Controls
Inches [mm]
Proximity
Sensors
9 Port with Fiber
SE-SW9U-ST-WT and SE-SW9U-SC-WT
Removable
Screw Block,
Phoenix
p/n 1757035
4.00
[101.6]
0.30
[7.6]
0.40
[10.2]
0.175
[4.4]
4.35
[110.5]
4.50
[114.3]
Snaps to standard
35 mm x 7.5 mm height
DIN rail (EN50022)
Dia. 0.175 [4.4]
Use for direct
panel mounting to
a flat surface with
up to #8 screw.
Removable
for direct panel
mounting
1.60
[40.6]
0.80
[20.3]
3.00
[76.2]
ACT/LNK/Speed LED
This is a bi-color (green / yellow) LED on
models with one LED per RJ45 port.
Indicates that there is a proper Ethernet
ON Solid
connection (Link) between the port and
(not flashing) another Ethernet device, but no
communications activity is detected.
Flashing
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
Green
A 100 Mbps (100BaseT) connection is
detected.
Yellow
A 10 Mbps (10BaseT) connection is
detected.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
1.50
[3.81]
SE-SW9U-ST-WT
with one ST type fiber port
2.25
[57.1]
SE-SW9U-SC-WT
with one SC type fiber port
<--->
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
C
Temperature
Sensors
2.25
[57.1]
Pushbuttons/
Lights
Process
0.39
[9.9]
Fiber LED
Relays/
Timers
Specifications
Comm.
This is the Green LED on the fiber optic The following are specifications relevant to
the SE-SW9U-ST-WT and SE-SW9U-SC-WT
models.
9-Port Ethernet Switches with Fiber Port.
Indicates that there is a proper fiber
ON (green)
connection (link) between the port and
Input power (typical
(not flashing) another fiber device, but no communi5.0 W
with all ports active
cations activity is detected.
at 100 Mbps)
Indicates that there is a proper fiber
8 oz (0.23 kg)
Weight
ON (green)
connection (link) between the port and
another fiber device, and that there is
Power connector
(flashing)
5.0 lb-in (0.57 Nm)
communications activity.
max. screw torque
OFF
Photo
Sensors
Indicates that there is not a proper fiber
connection (Link) between the port and
another fiber device. Make sure the
fiber optic cable has been plugged
securely into the ports at both ends.
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safeety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Terminal
Blocks &
Wiring
Communication Products
e28-31
Part #
Index
Stride Media Converter
®
2-Port Media Converter - Plastic Case
STRIDE SlimLine Industrial Unmanaged Ethernet Media Converter, plastic
case, -10 to +60 °C operating temperature range, one 10/100BaseT
auto-detecting, auto-crossover and auto-polarity RJ45 Ethernet port and
one multimode 100BaseFX ST or SC fiber port. Redundant power inputs
with surge and spike protection, DIN rail mounting. Supports Store and
Forward wire speed switching and full-duplex with flow control.
UL/CUL1604 (Class I, Div. 2, Groups A, B, C, D) and CE marked.
Dimensions
Inches [mm]
Media Converter
SE-MC2U-ST and SE-MC2U-SC
Removable
Screw Block,
Phoenix
p/n 1757035
0.40
[10.2]
Snaps to standard
35 mm x 7.5 mm height
DIN rail (EN50022)
1.01
[25.7]
4.35
[110.5]
3.96
[100.6]
1.98
[50.3]
1.01
[25.7]
ACT/LNK LED
This is the Yellow LED on models with two
LEDs per RJ45 port.
Indicates that there is a proper Ethernet
ON (yellow) connection (Link) between the port and
(not flashing) another Ethernet device, but no
Speed 10/100 LED
This is the Green LED on models with two
LEDs per RJ45 port.
ON (green)
A 100 Mbps (100BaseT) connection is
detected.
OFF
A 10 Mbps (10BaseT) connection is
detected.
communications activity is detected.
ON (yellow)
(flashing)
Indicates that there is a proper Ethernet
connection (Link) between the port and
another Ethernet device, and that there
is communications activity.
OFF
Indicates that there is not a proper
Ethernet connection (Link) between the
port and another Ethernet device. Make
sure the cable has been plugged
securely into the ports at both ends.
1.98
[50.3]
SE-MC2U-SC
with one SC type fiber port
<--->
0.06
[1.5]
3.26
[82.8]
1.00
[25.4]
SE-MC2U-ST
with one ST type fiber port
Dia. 0.15 [3.8]
Use for direct
panel mounting
to a flat surface.
Fiber LED
Specifications
The following are specifications relevant to
the SE-MC2U-ST and SE-MC2U-SC
Media Converters.
Input power (typical
with all ports active
at 100 Mbps)
Weight
Power connector
max. screw torque
2.0 W
4 oz (0.11 kg)
5.0 lb-in (0.57 Nm)
This is the Green LED on the fiber optic
models.
Indicates that there is a proper fiber
ON (green)
connection (Link) between the port
(not flashing) and another fiber device, but no communications activity is detected.
ON (green)
(flashing)
Indicates that there is a proper fiber
connection (Link) between the port
and another fiber device, and that
there is communications activity.
OFF
Indicates that there is not a proper fiber
connection (Link) between the port and
another fiber device. Make sure the
fiber optic cable has been plugged
securely into the ports at both ends.
Volume 14
e28-32
Communication Products
1 - 80 0 - 633 - 0405
Other Ethernet Communications Products
HA-TADP
<--->
The HA-TADP PC Ethernet adapter card is
fully Plug-and-Play compatible and uses
standard AMD PCNET II Family Ethernet
Adapter drivers found in the Windows
98/2000/NT/XP operating systems.
Company
Information
Systems
Overview
Programmable
Controllers
Field I/O
Software
Features
C-more &
other HMI
• Ethernet NIC for PC, PCI
• 10/100Base-T, RJ45
• PCI connection
• 100m maximum cable length
• Up to 100 Mbps data transfer rate
• Complies with IEEE 802.2 and 802.3
10Base-T standards
• Installs in 1/2 PCI slot
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
ECOM starter kits
H2-ECOM-START <--->
H4-ECOM-START <--->
The H2-ECOM-START and the H4-ECOM-START kits give
you everything you need to make your first Ethernet to PLC
connection simple to build. Each contains a PLC ECOM
module and instruction manual, a network adapter card for
your PC, a crossover cable, and a Showcase Demo CD.
RT-CNFGKIT
Encoders
<--->
The Ethernet Configuration Kit includes a five-port
10/100Base-T Ethernet switch, four straight-through
cables, and one crossover cable. (The cables are at
least five feet in length.) The kit provides a great
convenience for configuring systems, demonstration
systems or basic control projects using Ethernet.
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Appendix
Product
Index
Part #
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-33
MDM-TEL Industrial Modem
Reduce design time
The MDM-TEL industrial serial modem has
the features to meet your application
requirements in a straight-forward manner.
You won’t need to concoct a way to make
it work. The MDM-TEL uses an industrial
version of the standard PC modem chip
set, so it supports the full set of AT
commands and features. The MDM-TEL
complies with telephone systems around
the world. Whether you have domestic or
international customers, the MDM-TEL can
go where your equipment goes. Required
to use a specific PLC? No problem. The
MDM-TEL is compatible with most brands.
And with the MDM-TEL, you can avoid
repeating the design and qualification
process. Our modems have a five-year
guaranteed availability.
Industrial grade
The MDM-TEL has been designed for the
industrial environment. It will survive
extreme temperatures, as well as dirty and
unreliable industrial power. Meeting UL
1604 (Class I Div. 2) and the IEC68-2
standard for vibration resilience, the
MDM-TEL will provide years of reliable
performance in applications where other
modems just shouldn’t go.
Features:
• Contact-initiated by dialing a
PLC or any other device
• Works with most PLCs (Null
Modem adapter included)
• Auto answer capability
• Global Telecom capability
• DC-powered (no external
transformer needed)
• Offers choice of DIN rail or
panel mounting
• UL 508 (PLC enclosure), UL
1604 Class I, Div. 2, CSA,
and CE-listed
• Rated -30°C to +70°C
• Includes modem setup
software (Windows)
• No DIP switches or jumpers
• Includes RS-232 (DB9) modem
configuration cable
Simplify installation
MDM-TEL’s PC software includes an
advanced Windows-based Configuration
Wizard for easy set-up. The MDM-TEL
comes ready for either DIN-rail or panel
mounting. Requiring only 1.6W of 24 VDC
power, the MDM-TEL is perfect for control
panels and remote locations without the
need for a 110 VAC source.
MDM-TEL
PLC can actuate dial out ...
PLC
<--->
PC
Phone Lines
Comm.
Cable
Note: a discrete PLC output
can trigger modem dialing
and a discrete PLC input can
indicate a connection.
Comm.
Cable
MDM-TEL Modem
MDM-TEL Modem
Volume 14
e28-34
Communication Products
1 - 80 0 - 633 - 0405
MDM-TEL Specifications
MDM-TEL Performance Specifications
Company
Information
Mounting dimensions
Systems
Overview
Programmable
Controllers
Telephone Line
Max. data rate
33.6 kbps (V.34)
Compatibility
V.34, V32bis, V.32, V.22, V.22A/B, V.23, V.21,
Bell 212A and 103
Field I/O
Data compression
V.42 bis MNP5
Error correction
V.42 MNP 2-4
Software
Ringer equivalent
0.3
Line/phone jack
RJ11
C-more &
other HMI
INDUSTRIAL MODEM
SELF-DIALING MODEM
INDUSTRIAL MODEM PLUS
Drives
RS232 Port
Max. RS232 rate
Soft
Starters
115.2 kbps (Kilobaud)
RS232 (DB9 female)
Command set
TXD, RXD, CTS, RTS, DCD,
DTR, DSR, RI, GND
All standard AT and S register commands,incl.
Class 1 & 2 Fax
Status LEDs
CD (carrier detect)
Carrier detected on the phone line
TR (terminal ready)
Host connected and ready
RD (receive data)
Data is received from the phone line
TD (transmit data)
Data being sent out the phone line
Power
On when power is present
General Characteristics
Input power
10-30 VDC
Input current
65 mA @ 24 VDC
Operating temperature -30 C to 70 C (-40 C to 85 C storage)
Humidity
5% to 95% RH (non-condensing)
Flammability
UL 94V-0 materials
Telecom certification
FCC part 68, Industry Canada CS03-8, CTR21
(98/482/EC); A CA TS 001-1997; ACA TS 0021997
Electrical safety
UL 508, CSA C22. 2/14; EN61010-1 (IEC1010),
IEC 950: 1991, AS/NZS3260-1993
EMI emissions
FCC part15, ICES-003, Class A; EN55022;
AS/NZS3548-1995
EMC immunity
EN50082-1 (IEC801-2, 3, 4)
Surge withstand
IEEE-472 (ANSI C37.90)
Vibration
IEC68-2-6
Hazardous locations
UL 1604 (file #E200031),
CSA C22.2/213-M1987, Class 1, Div 2, Groups
A,B,C,D),
Cenelec EN50021 (EEx nA II T4)
Mounting
DIN rail or panel mount
Motors &
Gearbox
Steppers/
Servos
Note: Screw holes are provided as
an alternative to DIN-rail mounting.
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Complete documentation
The modem wizard and user manual are provided on the MDM-TEL CD-ROM, or
may be downloaded from www.automationdirect.com. An application note with
help for many common situations is included.
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
PLC Discrete I/O Interface
Trigger input
Connects to PLC output. Starts auto-dialing
when TRUE.
Enclosures
Voltage range
9 to 30 VDC (6.5 mA at 24 VDC)
Max OFF voltage
5 VDC
Tools
Online output
Output type
Output is ON as long as a connection exists
(carrier detect).
Sourcing, switches power supply 100 mA max
output current
Pneumatics
Easy set-up with modem wizard software
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-35
Part #
Index
MB-GATEWAY Modbus TCP/IP to RTU Gateway
MB-GATEWAY
<--->
AutomationDirect’s MB-GATEWAY is a single port Modbus
Gateway module that converts Modbus TCP to Modbus RTU. It
supports up to 12 simultaneous Modbus TCP Client (master)
Ethernet connections, and up to 128 RTU Server (slaves) serial
connections. MB-GATEWAY requires 10VDC to 36VDC from an
external power supply. Each module has one RJ45 10/100 Mbps
Ethernet port and one RS-422/485 2 or 4-wire serial port. It
supports NetEdit* or Web Browser based configuration tools.
Key features
• Automatic read function
• RJ45 10/100 Mbps Ethernet port
• RS-422/485 2 or 4 wire serial port
• Supports NetEdit* and Web browser
configuration tools
• 35 mm DIN rail mount
C
UL
R
US
*NetEdit version 3.8 or later is required to support MB-GATEWAY.
Specifications
Ethernet
Interface
Specifications
Port
RJ-45
Speed
10/100 Mbps
Protection
Built-in 1.5 KV magnetic isolation
Protocol Supported
Clients (Masters)
Supported
Modbus TCP/IP Server (Slave)
Port
Power Consumption
2W
Use Class 2 power supply
Use conductors rated 60/75 °C
3-position terminal strip
(Phoenix #1863165) provided
12 simultaneous Modbus TCP connections
Wire Range
16 - 28 AWG Solid or Stranded Conductor
(1.5 mm2)
6-position terminal strip
(Phoenix #1863194) provided
Wire Strip Length
Screw Torque
0.24 - 0.27 in (6 - 7 mm)
(5-wire) Signals: TX+, TX-, RX-, RX+, GND
Supported Signal Lines RS-422
RS-485 (3-wire) Signals: Data+, Data -, GND
300*, 600*, 1200*, 4800, 9600,
14.4k, 19.2k, 38.4k, 57.6k, 115.2k
Supported Baud Rates
*Cannot be set with DIP switches.
Must be set via Web browser configuration.
Serial
Interface
Parity
Odd, Even, None
Data Bits
8
Stop Bits
1, 2
Protocol Supported
Servers (Slaves)
Supported
Modbus RTU Client (Master)
Termination
Dimensions
128
Permanently installed 120 Ω resistor between
Data+ and Data -
Inches [mm]
1.7 lb-in (0.2 Nm)
Operating Temperature
Range
0 to 60 °C (32 to 140 °F)
Storage Temperature
Range
-20 to 70 °C (-4 to 158 °F)
Humidity
Environmental Air
Vibration
Shock
Weight
Agency Approval
5 to 95% RH (non-condensing)
For use in Pollution Degree 2 Environment
MIL STD 810C 514.2
MIL STD 810C 516.2
0.2 lbs (0.09 kg)
UL (file #E185989)
Replacement Part
Part Number
Description
MB-Gateway-Connector Kit
1ea: Phoenix 3 pin power
connector AND
MB-GW-CON
1 ea: Phoenix 6 pin
serial connector
Price
<--->
Volume 14
e28-36
Communication Products
1 - 80 0 - 633 - 0405
FA-ISOCON Universal Isolated Network Adapter
Specifications
FA-ISOCON
<--->
The FA-ISOCON Universal Isolated
Network Adapter is used to place RS-232
devices such as PLCs, operator interfaces,
industrial computers, etc., on an RS-422
or RS-485 multidrop network. The
Network Adapter converts RS-232 signal
levels to isolated RS-422 or RS-485
signal levels. This network adapter is
similar to our other RS-232/422
converters, but it offers the added benefit
of network isolation. This adapter is especially useful in noisy environments where
data corruption due to induced noise is
possible.
The FA-ISOCON features Automatic
Network Transmitter Enable (ANTE) so
that an RTS output is not required on the
connected RS-232 device. The FAISOCON is a direct functional replacement
for
the
FA-ISONET when CTS Controlled
Transmit Enable(CCTE) mode is active.
Having both ANTE and CCTE modes, the
FA-ISOCON is compatible with most RS232 devices.
The diagram below shows a simple
example of an FA-ISOCON used for PC
to multiple PLC communications.
Key features
Following are some of the key features
and benefits of the FA-ISOCON:
• Dipswitch selectable Automatic Network
Transmitter Enable so that an RTS output
is not required on the connected RS-232
device.
• Dipswitch selectable CTS Controlled
Transmit Enable mode for backwards
compatibility with the FA-ISONET.
• Dipswitch select termination and bias
resistors; short/open TXD+/RXD+ and
TXD-/RXD- terminals for 1/2 duplex comm.
• Isolation removes ground loop currents
from data lines. Noise voltages resulting
from transformer-like coupling are also
eliminated.
• Many forms of radiated noise are
reduced to negligible levels.
• FA-ISOCON can be powered from 24 VDC
or 5 VDC. (Unit may be powered directly
from CPU pins on CPUs with +5V pins or
the auxiliary 24 VDC power supply on I/O
bases.)
• Unit has RS-232 transmit and receive
LEDs and an RS-422/485 Transmitter
Enable LED to simplify troubleshooting.
RJ12 port allows you to use the modular cables (included) to
quickly connect the D0-05, D2-240 or D3-340 to the
FA-ISOCON. Connections can be made to the D3-350, DL405
CPUs and PCs with the connectors that are included.
• Max. network distance: 4000 feet
• Max. number of devices: 32 per network
• Max. baud rate: 115.2 Kbaud
• Supply voltage: 5 VDC @ 100 mA max.
(from CPU) or 24 VDC @ 70 mA (external
source)
• Max. driver load: 62 ohms
• Driver voltage: ±1.5V minimum
• No load current: 80 mA
• Max. current: 100 mA (62 )
• Isolation resistance: >1014 /7pF
• Voltage withstand: 1.2 KVrms/1s
1.0 KVrms/1 minute
• Operating temp: 0 to 60°C (32 to 140°F)
Installation is a ‘snap’
The FA-ISOCON comes with an attached
DIN rail connector. Simply hook the top of
the DIN connector on the DIN rail, then
pull the unit down and rotate the bottom
of the DIN connector onto the DIN rail (or
use the provided holes to flush-mount it
on a panel). The adapter’s RJ12 serial
port can be connected to a PC or a
DirectLogic CPU port using one of the
supplied cables/connectors. Or, use the
adapter’s RS-232 terminal block to
connect to a serial device. Connect the
RS-422/485 communications wiring to
the convenient RS-422/485 terminal
blocks.
Adapter components
• FA-ISOCON Isolated Network Adapter
with attached DIN mounting bracket
• 25-pin male to RJ12 6P6C connector
• 9-pin female to RJ12 6P6C connector
• 1' cable with RJ12 6P6C plug to RJ11 4P4C
plug for use with D3-340.
• 1’ cable with RJ12 6P6C plug to RJ12 6P6C
plug
Dimensions including DIN bracket and terminal blk.
HxWxD (4.55” x 0.90” x 4.69”)
Network master
(PC or PLC)
D3-340
A
Belden 8102/9841
RS422/485 cable or
equivalent
B
External power required
D0-05
D2-240 Bottom
D
Port 2 ONLY!
(Supplies 5VDC)
port ONLY!
(Supplies 5VDC)
A) FA-ISOCON converts the network
master’s (computer or PLC, etc.) RS-232
communication signal levels to RS-422/485.
B) FA-ISOCON converts the RS-422/485 signal
levels back to RS-232 for a connection to
the D3-340 CPU bottom port.
C) FA-ISOCON converts the RS-422/485 signal
levels back to RS-232 for a connection to
the D2-240 CPU bottom port.
D) FA-ISOCON converts the RS-422/485 signal
levels back to RS-232 for a connection to
the D0-05 CPU port 2.
C
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Removable terminal blocks make it easy to connect communication wiring.
(Replacement terminal plug kit FA-ISOCON-P)
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Systems
Overview
Circuit
Protection
External power required
FA-ISOCON
Company
Information
Communication Products
e28-37
Part #
Index
F2-UNICON Universal Converter
General
specifications
• Max. network distance: 4000 feet
• Max. baud rate: 19.2 Kbaud
• Supply voltage: 5 VDC (from CPU)
• Max. driver load: 62
• Driver voltage: ±1.5V minimum
• No load current: 65 mA
• Max. current: 100 mA
• Operating temp: 60°C (140°F)
Example of system using F2-UNICON
A) F2-UNICON converts the network master’s (computer) RS-232 communications
card signal levels to RS-422/485, which is
suitable for a multi-drop network.
B) F2-UNICON converts the RS-422/485
signal levels back to RS-232 for a connection to the D2-240 CPU bottom port.
C) F2-UNICON converts the RS-422/485 signal levels back to RS-232 for a connection
to the D2-240 CPU bottom port.
D) F2-UNICON converts the RS-422/485 signal levels back to RS-232 for a connection
to the DL05 port 2
Adapter components
F2-UNICON
<--->
The F2-UNICON Universal Converter
converts RS-232 signal levels to RS-422
signal
levels
or
RS-422
signal
levels into RS-232 signals. The
F2-UNICON does not offer the benefit of
network
isolation
that
the
FA-ISOCON offers. The F2-UNICON has
been specifically designed to be used with
the DL05 and D2-240 CPUs. It offers
features such as:
• Easily mounts to DIN rail
• Does not require an external power
source. It obtains power from the +5V pin
on the D2-240 CPU port (bottom port) and
the DL05 (port 2).
• Has transmit and receive LEDs to simplify
troubleshooting.
Installation is a “snap”
The F2-UNICON comes with a DIN rail
housing for the circuit board. Simply snap
the board into the housing and mount it on
a DIN rail (or flush-mount it on a panel).
Connect the communications wiring to the
convenient terminal blocks, then connect
the adapter to the CPU port with the cable.
• RS-232/422/485 converter circuit board
• Mounting assembly (including a DIN rail
bracket) for the circuit board
• 1 ft. modular cable with two RJ12 6P6C
plugs
FA-ISOCON Converter
Network master
A
B
D2-240
Bottom port
ONLY!
F2-UNICON
GND
RXD+
RXD-TXD-TXD+
6
5
4
3
2
SIG GND
+5V IN
T XD
RXD
CTS
1 SIG GND
C
D2-240
Port 2 ONLY!
D
2.0”
(50.8mm)
Phone jack allows you to
use modular cable (included) to quickly connect the
D0-05 or D2-240 to the
F2-UNICON.
2.86"
(72.6mm)
(including DIN rail)
bracket)
DL05
Wiring terminals make it easy to connect communications
wiring, especially for multidrop configurations.
Drawing not to scale
Volume 14
e28-38
Communication Products
1 - 80 0 - 633 - 0405
FA-CABKIT Universal Cable Kit
FA-CABKIT <--->
Company
Information
Follow these simple steps to use the
cable kit:
The Universal Cable Kit (FA-CABKIT) allows
you to connect various types of
DirectLOGIC™ products with an RS-232
cable in a matter of minutes. The kit consists
of two phone cables (with male plugs already
attached) and several specially wired
connectors. The special connectors are a
D-sub style with built-in female phone jacks.
This kit, with its wide variety of special
connectors, allows for easy connections to
many different products from each of the
DirectLOGIC product families. The individual
pieces of the kit are not sold separately
except for the FA-15HD high density 15-pin
connector.
Systems
Overview
Programmable
Controllers
1. Plug the proper universal connector (or cable) into the appropriate
communication port of the host product (CPU, DCM, CoProcessor
module, personal computer, operator interface, etc.).
2. Plug the proper universal connector onto the other device to be
connected to the host system : (DL05, DL06, DL105, DL205, DL305,
DL405, CoProcessor module, PC communication card, etc.).
3. Connect the universal cable between the two connectors.
4. Verify that the circuit you created is correct before applying power.
WARNING: This cable system is designed for temporary testing situations and
should not be used in actual applications. This cable is not shielded and is
susceptible to electrical noise. Electrical noise can cause unpredictable operation
that may result in a risk of personal injury or damage to equipment.
Note: For D-sub to terminal block adapters, see the Connection Systems section
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
9-pin
Current
Sensors
Pressure
Sensors
Step 2
Temperature
Sensors
Pushbuttons/
Lights
Process
Step 3
Universal 25-pin
D-sub connector
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Step 1
Power
Circuit
Protection
Universal 9-pin
D-sub connector
Enclosures
DirectVIEW™ 1000
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-39
Part #
Index
FA-CABKIT Universal Cable Kit
The table lists various devices that can be
connected quickly with the universal cable
kit. To determine which parts you need to
use, simply use the table to find the
connection you wish to make. Then match
each device required for that connection
with its part number. Snap the pieces
together and you’re ready to communicate. The following seven parts are
included in the Universal Cable Kit. These
parts are not sold separately, except for the
FA-15HD high density 15-pin connector.
1. Standard phone-style connectors
(RJ12), non-shielded
2. Standard phone and handset style
connectors (RJ12, RJ11), non-shielded
3. Universal 9-pin female D-sub connector
Standard RJ12
phone jack
4. Universal 9-pin male D-sub connector
Standard RJ12
phone jack
onnector
pins
5. Universal 15-pin male D-sub connector
Standard RJ12
phone jack
Function
6. Universal 25-pin male D-sub connector
Standard RJ12
phone jack
connector
6 pins
7. Universal 15-pin HD male D-sub connector
(FA-15HD)
Universal cable kit
Items included in the universal cable kit
Device Description
1.
7 ft. standard cable, 6P6C to 6P6C phone type
2.
6 ft. adapter cable, 6P6C to 4P4C phone type
3.
AT connector 9-pin female to 6P6C connector
4.
(ASCII BASIC module) 9-pin male connector to 6P6C connector
5.
DL405 15-pin male connector to 6P6C connector
6.
DL405 CPU and DCM 25-pin male connector to 6P6C connector
7.
DL06, D2-250(-1) and D2-260 CPUs 15-pin HD male connector to 6P6C connector
Common connection examples
DL05, DL06, DL105, DL205, D3-350 and (D4-450 port2)
CPU connections
Connection desired. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Devices required
1.
DL05/06/105/205/DL350/D4-450 to AT type computer 9-pin. . . . . . . . . . . . . . . . . . . . . . 1,3
2.
CPU to DV-1000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
3.
CPU to DL205 or DL405 DCM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,6
4.
CPU to DL340 CPU. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
5.
CPU to ABM (DL205 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,4
DL06, D2-250(-1), D2-260 CPU port 2 connections
Connection desired. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Devices required
1.
DL06/250(-1)/260 port 2 to AT type computer 9-pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,3,7
2.
DL06/250(-1)/260 port 2 to DV-1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,3,7
DL305 D3-232-DCU connections
Connection desired. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Devices required
1.
DCU to AT type computer 9-pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,6,3
2.
DCU to DL405 series DCM (requires 2 kits) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,6,6
3.
DCU to DL340 CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,6
4.
DCU to ABM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,6,4
DL305 CPU connections
Connection desired. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Devices required
1.
DL340 CPU to AT type computer 9-pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,3
2.
DL340 CPU to DL405 series CPU/DCM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,6
3.
DL340 CPU to DL240 CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4.
DL340 to ABM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,4
5.
DL340 CPU to DCU CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,6
DL405 CPU (15-pin) top port connections
Connection desired. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Devices required
1.
DL405 CPU to AT type computer 9-pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,5,3
2.
DL405 CPU to DV-1000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,5
DL405 CPU (25-pin) bottom port connections
Connection desired. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Devices required
1.
DL405 CPU to AT type computer 9-pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,6,3
2.
DL405 CPU to DL405 series DCM (requires 2 kits) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,6,6
3.
DL405 CPU to DL340 CPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,6
4.
DL405 CPU to ABM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,6,4
Standard RJ12
phone jack
Volume 14
Function
e28-40
Communication Products
1 - 80 0 - 633 - 0405
USB Programming Cables
Company
Information
USB Cables
Systems
Overview
Programmable
Controllers
AutomationDirect’s high quality USB cables are used to
connect USB devices to a USB port on a PC. Each cable has
Standard-A plug to Standard-B plug end connectors and meet
the USB 2.0 requirements. These cables can be used for
Programming Productivity Series CPU’s, C-more panels,
C-m ore Micro-Graphic TFT panels (EA1-T4CL, EA1-T6CL),
and PC to touchscreen connections for Atlas Industrial
Monitors that include touchscreen capability.
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Part Number
USB-CBL-AB3
USB-CBL-AB6
USB-CBL-AB10
USB-CBL-AB15
Description
Price
3-ft (0.9 meter) Standard USB 2.0 cable with Standard-A
plug to Standard-B plug. Suitable for all USB devices.
6-ft (1.8 meter) Standard USB 2.0 cable with Standard-A
plug to Standard-B plug. Suitable for all USB devices.
10-ft (3 meter) Standard USB 2.0 cable with Standard-A
plug to Standard-B plug. Suitable for all USB devices.
15-ft (4.6 meter) Standard USB 2.0 cable with StandardA plug to Standard-B plug. Suitable for all USB devices.
<--->
<--->
<--->
<--->
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
•Productivity Series CPU’s
• C-more panels
•C-more Micro-Graphic TFT panels
(EA1-T4CL, EA1-T6CL)
•Atlas Industrial Monitors with
touchscreen capability.
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-41
Part #
Index
USB to RS-232 Converter
USB-RS232
<--->
This quality USB to RS-232 converter
transparently connects serial devices to PC
applications via a USB port. It is perfect for
the user needing to connect to a serial
port-based peripheral from a laptop PC
with an available USB port but no serial
port. The adapter driver creates a virtual
serial port (using the next available COM
number). Applications connect to the
virtual COM port as if it were a standard
serial port. The USB-serial conversion is
completely transparent to the peripheral
device.
Features:
• Flexible cable
• Premium quality
• Gold connectors
• Ergonomic molding for easy connection
• Industry standard color coded for easy
installation
• Foil and braid shielding to reduce EMI/RFI
interference
• Designed for high-speed transmissions
• LED power and TX/RX indicators
• Mates with PC DB9 serial cables (such as our
D2-DSCBL PLC cable)
• 2 hex nuts included
Specifications:
Compatible with AUTOMATIONDIRECT’s:
• DirectLOGIC PLCs (DirectSOFT 3.0C build 80 and later versions)
• Optimate panels (OP-WINEDIT software)
• MDM-TEL industrial modem (Modem Wizard software)
• LookoutDirect software
Hardware Requirements:
• Pentium II class processor or higher
• One available USB port
Device
• RS-232 standard
• Powered by the USB bus
• DB 9 male connector
• USB A male connector
• 6ft (1.8) cable
• USB 1.1 compliant
• Plug and Play
Operating Systems:
• Windows 98® and Windows 98 SE®
• Windows Millennium®
• Windows 2000 Professional®
• Windows 2000 Server® Family
• Windows XP Home®
• Windows XP Professional®
• Windows Vista®
• Windows 7®
Note: If needed, drivers can be downloaded at
http://support.automationdirect.com/downloads.html#tools
(choose USB-RS232 adaptor driver)
Volume 14
e28-42
Communication Products
1 - 80 0 - 633 - 0405
USB to RS-485 PC Adapter
USB to RS-485
PC Adapter
Convenient 2-wire USB to RS-485 serial
communication adapter for universal
RS-485 use (GS drives, SureServo servos,
Solo temperature controllers, CLICK PLCs,
etc.). Does not require an external power
supply or complicated configuration
process.
Features:
• Type A (plug) USB connector
• Universal female RJ45/RJ12 modular connector (accepts RJ12 & RJ45 plugs)
• Supports multiple baud rates
• USB v2.0 compliant
• RoHS compliant
• CE compliant
Company
Information
Components Included:
• Adapter
• Cable – 6-wire RJ12 crossover; 2m [79 in]
(for plug & play connectivity to GS drives)
• Cable – 2-wire RJ12–flying leads; 2m [79
in] (for universal RS-485 connectivity to
SureServo, Solo, etc.)
• Mini CD with Windows driver and
installation instructions
Part Number
USB-485M
Price
Each
<--->
Description
no external power suppy needed
Power Consumption
0.4W
Voltage Isolation
3000 VDC
Baud Rates Supported
75, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 (bps)
Transmission Type
RS-485 half-duplex (2-wire)
LED Display
Steady Green LED ON: power is ON.
Blinking orange LED: data is transmitting.
USB Connector
Type A (plug)
RS-485 Connector
RJ45
Compatibility
USB v2.0 specification
PC Compatibility
Windows Operating System required for bridge & driver installation:
Windows 7 - 32 bit; Windows 7 - 64 bit; Windows Vista - 32 bit;
Windows Vista - 64 bit; Windows XP
Software
C-more &
other HMI
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
USB-485M Dimensions
Specifications
Power Supply
Field I/O
Soft
Starters
Component Compatibilty *
GS series AC drives – GSOFT configuration software
GS series AC drives – Modbus polling
USB TO RS-485
SureServo servo drives – SV-PRO configuration software
PC Adapter;
includes (2) RJ12 SureServo servo drives – Modbus polling
cables, mini-CD SOLO process controllers – SL-SOFT configuration software
with driver,
SOLO process controllers – Modbus polling
instructions
CLICK PLCs – Modbus polling
P3-550 PLCs – Modbus polling
Programmable
Controllers
Drives
USB-485M
USB to RS-485 PC Adapter
Systems
Overview
Proximity
Sensors
Photo
Sensors
Limit
Switches
80.0
[3.15]
Encoders
Current
Sensors
Pressure
Sensors
UNITS:
mm [in]
Temperature
Sensors
21.2 [0.83]
22.5 [0.89]
USB-485M RJ-45 Pin-out
* NOT compatible with DirectSOFT PLC software.
(DirectSOFT RS-485 programming requires 4-wire full-duplex data transmission.)
8
1
RJ-45
Pin
Description
1
reserved
2
reserved
3
reserved
4
SG+
5
SG–
6
reserved
7
reserved
8
reserved
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-43
Part #
Index
Ethernet Patch Cables
Cat5e STP Ethernet Patch Cables
Connectivity
Ethernet is a multi-purpose communication protocol that has
become the data standard for the industrial market.
AutomationDirect offers several PLC’s, HMI’s and drives that
support the Ethernet Protocols for data distribution, software
programming and configuration.
Designed for Industrial Use
The noise interference radiated from electrical components that
is often associated with factory floor environments can result in
partial or complete data loss. This may result in delays or
complete communication loss in extremely noisy environments.
Our Ethernet patch cables are designed to reduce the effects of
(EMI) electromagnetic interference by incorporating a single
metal foil shield that wraps around the entire set of 8 wires in the
Cat5e cable. The RJ45 connectors are also shielded against
electrical interference and designed to be robust. Our 350 MHz
cables exceed all Cat5e TIA/EIA standards, and drastically
reduce both impedance and structural return loss (SRL) when
compared to standard 100 MHz cables.
RoHS
RoHS Compliant
Features
With several colors and lengths to choose from at great pricing,
these cables should help you in creating solid, reliable Ethernet
networks with any application.
• Connector; 50-micron gold plated RJ45 male plugs
• Conductor; 4-pair 24 AWG stranded copper
• Overall foil shielded cable for industrial applications
• Crossover cables have “crossover” label on each end.
• Exceeds Category 5e specifications, 350MHz
• Multiple lengths and colors
• CM rated, suitable for general use other than plenum spaces
• RoHS compliant
24AWG
Drain
Crossover Cable
1
2
3
4
5
6
7
8
RJ45
OR/WHT
GRN/WHT
OR
GRN
GRN/WHT
OR/WHT
BLU
BLU/WHT
BLU
BLU/WHT
GRN
BRN/WHT
OR
BRN/WHT
BRN
BRN
DRAIN
1
2
3
4
5
6
7
8
RJ45
shield
Patch (Straight-through) Cable
1
2
3
4
5
6
7
8
RJ45
OR/WHT
OR/WHT
OR
GRN/WHT
OR
GRN/WHT
BLU
BLU/WHT
BLU
BLU/WHT
GRN
BRN/WHT
GRN
BRN/WHT
BRN
DRAIN
shield
BRN
DRAIN
1
2
3
4
5
6
7
8
RJ45
Mylar
Separator
12345678
Foil Shield
8-pin RJ45 Connector
Ø 6.0 +/-.15mm
PVC
Jacket
Volume 14
e28-44
Communication Products
1 - 80 0 - 633 - 0405
Ethernet Patch Cables
Company
Information
Systems
Overview
Straight Through Patch Cables
Part Number
C5E-STPGY-S3
C5E-STPBK-S3
C5E-STPBL-S3
C5E-STPGN-S3
C5E-STPPL-S3
C5E-STPRD-S3
C5E-STPYL-S3
C5E-STPOR-S3
C5E-STPGY-S7
C5E-STPBK-S7
C5E-STPBL-S7
C5E-STPGN-S7
C5E-STPPL-S7
C5E-STPRD-S7
C5E-STPYL-S7
C5E-STPOR-S7
C5E-STPGY-S10
C5E-STPBK-S10
C5E-STPBL-S10
C5E-STPGN-S10
C5E-STPPL-S10
C5E-STPRD-S10
C5E-STPYL-S10
C5E-STPOR-S10
C5E-STPGY-S14
C5E-STPBK-S14
C5E-STPBL-S14
C5E-STPGN-S14
C5E-STPPL-S14
C5E-STPRD-S14
C5E-STPYL-S14
C5E-STPOR-S14
C5E-STPGY-S25
C5E-STPBK-S25
C5E-STPBL-S25
C5E-STPGN-S25
C5E-STPPL-S25
C5E-STPRD-S25
C5E-STPYL-S25
C5E-STPOR-S25
C5E-STPGY-S50
C5E-STPBK-S50
C5E-STPBL-S50
C5E-STPGN-S50
C5E-STPPL-S50
C5E-STPRD-S50
C5E-STPYL-S50
C5E-STPOR-S50
Color
Description
Length
Price
Gray
<--->
Black
<--->
Blue
Green
Purple
<--->
Ethernet patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
3 ft. (0.9m) length, PVC cable jacket. RJ-45 male connectors, 350 MHz,
4-pair 24 AWG stranded copper. Can support 10 / 100 / 1000 Mbps;
exceeds Category 5e cable specifications.
3’ (0.91 m)
<--->
<--->
Red
<--->
Yellow
<--->
Orange
<--->
Gray
<--->
Black
<--->
Blue
<--->
Green
Purple
Ethernet patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
7 ft. (2.1m) length, PVC cable jacket. RJ-45 male connectors, 350 MHz,
4-pair 24 AWG stranded copper. Can support 10 / 100 / 1000 Mbps;
exceeds Category 5e cable specifications.
7’ (2.13 m)
<--->
<--->
Red
<--->
Yellow
<--->
Orange
<--->
Gray
<--->
Black
<--->
Blue
Green
Purple
<--->
Ethernet patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
10 ft. (3.0m) length, PVC cable jacket. RJ-45 male connectors,
350 MHz, 4-pair 24 AWG stranded copper. Can support
10 / 100 / 1000 Mbps; exceeds Category 5e cable specifications.
10’ (3.05 m)
<--->
<--->
Red
<--->
Yellow
<--->
Orange
<--->
Gray
<--->
Black
<--->
Blue
<--->
Green
Purple
Ethernet patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
14 ft. (4.3m) length, PVC cable jacket. RJ-45 male connectors,
350 MHz, 4-pair 24 AWG stranded copper. Can support
10 / 100 / 1000 Mbps; exceeds Category 5e cable specifications.
14’ (4.3 m)
<--->
<--->
Red
<--->
Yellow
<--->
Orange
<--->
Gray
<--->
Black
<--->
Blue
<--->
Green
Purple
Ethernet patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
25 ft. (7.5m) length, PVC cable jacket. RJ-45 male connectors,
350 MHz, 4-pair 24 AWG stranded copper. Can support
10 / 100 / 1000 Mbps; exceeds Category 5e cable specifications.
25’ (7.6 m)
<--->
<--->
Red
<--->
Yellow
<--->
Orange
<--->
Gray
<--->
Black
<--->
Blue
Green
Purple
<--->
Ethernet patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
50 ft. (15.2m) length, PVC cable jacket. RJ-45 male connectors,
350 MHz, 4-pair 24 AWG stranded copper. Can support
10 / 100 / 1000 Mbps; exceeds Category 5e cable specifications.
50’ (15.2 m)
<--->
<--->
Red
<--->
Yellow
<--->
Orange
<--->
Volume 14
w w w. a u to m at i o n d i re c t . c o m / c o m m u n i c at i o n s
Communication Products
e28-45
Programmable
Controllers
Field I/O
Software
C-more &
other HMI
Drives
Soft
Starters
Motors &
Gearbox
Steppers/
Servos
Motor
Controls
Proximity
Sensors
Photo
Sensors
Limit
Switches
Encoders
Current
Sensors
Pressure
Sensors
Temperature
Sensors
Pushbuttons/
Lights
Process
Relays/
Timers
Comm.
Terminal
Blocks &
Wiring
Power
Circuit
Protection
Enclosures
Tools
Pneumatics
Safety
Appendix
Product
Index
Part #
Index
Ethernet Patch Cables
Crossover Patch Cables
Part Number
C5E-STPYL-C3
Color
Description
Yellow
C5E-STPOR-C3
Orange
C5E-STPYL-C7
Yellow
C5E-STPOR-C7
Orange
C5E-STPYL-C10
Yellow
C5E-STPOR-C10
Orange
C5E-STPYL-C14
Yellow
C5E-STPOR-C14
Orange
C5E-STPYL-C25
Yellow
C5E-STPOR-C25
Orange
C5E-STPYL-C50
Yellow
C5E-STPOR-C50
Orange
Length
Ethernet crossover patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
3 ft. (0.9m) length, PVC cable jacket. RJ-45 male connectors, 350 MHz, 4-pair 24 AWG
stranded copper; labeled as "Crossover" on both ends. Can support 10 / 100 / 1000
Mbps; exceeds Category 5e cable specifications.
3’ (0.91 m)
Ethernet crossover patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
7ft (2.1m) length, PVC cable jacket. RJ-45 male connectors, 350 MHz, 4-pair 24 AWG
stranded copper; labeled as "Crossover" on both ends. Can support 10 / 100 / 1000
Mbps; exceeds Category 5e cable specifications.
7’ (2.13 m)
Ethernet crossover patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
10ft (3.0m) length, PVC cable jacket. RJ-45 male connectors, 350 MHz, 4-pair 24 AWG
stranded copper; labeled as "Crossover" on both ends. Can support 10 / 100 / 1000
Mbps; exceeds Category 5e cable specifications.
10’ (3.05 m)
Ethernet crossover patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
14ft (4.3m) length, PVC cable jacket. RJ-45 male connectors, 350 MHz, 4-pair 24 AWG
stranded copper; labeled as "Crossover" on both ends. Can support 10 / 100 / 1000
Mbps; exceeds Category 5e cable specifications.
14’ (4.3 m)
Ethernet crossover patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
25ft (7.5m) length, PVC cable jacket. RJ-45 male connectors, 350 MHz, 4-pair 24 AWG
stranded copper; labeled as "Crossover" on both ends. Can support 10 / 100 / 1000
Mbps; exceeds Category 5e cable specifications.
25’ (7.6 m)
Ethernet crossover patch cable, Cat5e STP (Twisted Pairs with overall foil Shield),
50ft (15.2m) length, PVC cable jacket. RJ-45 male connectors, 350 MHz, 4-pair 24 AWG
stranded copper; labeled as "Crossover" on both ends. Can support 10 / 100 / 1000
Mbps; exceeds Category 5e cable specifications.
50’ (15.2 m)
Price
<--->
<--->
<--->
<--->
<--->
<--->
<--->
<--->
<--->
<--->
<--->
<--->
Volume 14
e28-46
Communication Products
1 - 80 0 - 633 - 0405
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement