FlexScan S2411W-U User`s Manual

FlexScan S2411W-U User`s Manual
PRECAUTIONS
Chapter 1 Features and Overview
1-1 Features
1-2 Switches and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Screen Adjustment
2-3 Color Adjustment
2-4 Off Timer/Power Saving Settings
2-5 Screen Size Selection
2-6 Power Indicator/EIZO Logo Display Setting
Important
2-7 Beeper Settings
2-8 Locking Switches
2-9 Setting Adjustment Menu Display
Please read this User’s Manual and Setup
Manual (separate volume) carefully to
familiarize yourself with safe and effective
usage.
2-10 Viewing Information/Setting Language
2-11 Resumption of Default Setting
Chapter 3 Connecting Cables
3-1 Connecting Two PCs to the Monitor
3-2 Connecting Peripheral USB Devices
Chapter 4 Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm
5-2 Cleaning
5-3 Specifications
5-4 Glossary
5-5 Preset Timing
How to Setup
Please read the Setup Manual (separate volume)
S2411W-U_UM_EN.indd cov.1
4/9/2007 5:50:06 PM
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them
carefully.
WARNING
Failure to abide by the information in a WARNING
may result in serious injury and can be life threatening.
CAUTION
Failure to abide by the information in a CAUTION
may result in moderate injury and/or property or
product damage.
Indicates a prohibited action.
Indicates a mandatory action that must be followed.
Copyright© 2006-2007 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specifications are subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Apple and Macintosh are registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager and UniColor Pro are trademarks of EIZO NANAO CORPORATION.
FlexScan, ScreenManager and EIZO are registered trademarks of EIZO NANAO CORPORATION in Japan and other countries.
As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Product specification may vary with sales areas.
Confirm the specification in the manual written in language of the region of purchase.
S2411W-U_UM_EN.indd cov.2
4/12/2007 3:22:25 PM
PRECAUTIONS
IMPORTANT
• This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specified in the specifications.
• To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on
the monitor.
[Location of Caution Statement]
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment
damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may result in
fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or spillage into
the cabinet may result in fire, electric shock, or equipment damage.
If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit
checked by a qualified service engineer before using it again.
PRECAUTIONS
S2411W-U_UM_EN.indd 1
1
4/9/2007 5:50:07 PM
WARNING
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in the transportation system (ship, aircraft, trains, automobiles, etc.)
• Do not place in a dusty or humid environment.
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing bags away from
babies and children.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
The equipment must be connected to a grounded main outlet.
Failure to do so may result in fire or electric shock.
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another voltage
than specified in this User’s Manual may cause fire, electric shock, or equipment damage.
• Do not overload your power circuit, as this may result in fire or electric shock.
2
S2411W-U_UM_EN.indd 2
PRECAUTIONS
4/9/2007 5:50:10 PM
WARNING
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fire
or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the arm
stand and install the unit securely.
Not doing so may cause the unit to become unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice. Do not
continue using a damaged unit. Using a damaged unit may result in fire or electric shock.
When reattaching the tilt stand, please use the same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth.
If any part of the skin or body comes in direct contact with the panel, please wash thoroughly.
If some physical symptoms result, please consult your doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
PRECAUTIONS
S2411W-U_UM_EN.indd 3
3
4/9/2007 5:50:11 PM
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with the cord
attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a closed space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or
equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.
4
S2411W-U_UM_EN.indd 4
PRECAUTIONS
4/9/2007 5:50:11 PM
LCD Panel
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
The LCD panel is manufactured using high-precision technology. However, note that the appearance of any missing
pixels or lit pixels does not indicate damage to the LCD monitor.
Percentage of effective pixels: 99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints
left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate
or damage your LCD panel. Leave the screen white or black to decrease the prints.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause damage to the monitor.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
PRECAUTIONS
S2411W-U_UM_EN.indd 5
5
4/9/2007 5:50:12 PM
CONTENTS
PRECAUTIONS ...................................................... 1
2-7
Beeper Settings ............................................. 20
● To set the beeper [Beep] .................................. 20
LCD Panel................................................................... 5
2-8
Chapter 1 Features and Overview ..................... 7
1-1
Features ............................................................ 7
1-2
Switches and Indicators.................................. 7
Locking Switches .......................................... 21
● To lock operation [Adjustment Lock]................. 21
To use the monitor comfortably ............................... 5
2-9
Setting Adjustment Menu Display ................ 21
● To update menu settings
[Menu Size/Menu Position/Menu Off Timer/
Translucent] ...................................................... 21
2-10 Viewing Information/Setting Language ....... 22
1-3
● To check settings, usage time, etc.
Functions and Basic Operation...................... 8
[Information] ..................................................... 22
● To set a language to be displayed
Chapter 2 Settings and Adjustments .............. 10
[Language] ....................................................... 22
2-1
Utility Disk ...................................................... 10
● Disk Contents ................................................... 10
2-11 Resumption of Default Setting ..................... 23
● To reset color adjustment [Reset] ..................... 23
● To use UniColor Pro ......................................... 10
● To reset all settings [Reset] .............................. 23
● To use ScreenManager Pro for LCD ................ 10
2-2
Screen Adjustment .........................................11
Chapter 3 Connecting Cables .......................... 24
Digital Input ...........................................................11
Analog Input .........................................................11
3-1
Connecting Two PCs to the Monitor ............ 24
● To set priority of PC to be displayed
2-3
Color Adjustment ........................................... 14
[Input Priority] ................................................... 25
Simple adjustment [FineContrast mode] .......... 14
● FineContrast Mode ........................................... 14
3-2
Connecting Peripheral USB Devices ........... 25
● To select FineContrast mode............................ 14
● To update color setting of FineContrast mode.. 14
Chapter 4 Troubleshooting............................... 26
Advanced Adjustments [Adjustment menu] ..... 15
● To select an appropriate mode for images ....... 15
Chapter 5 Reference ......................................... 28
● To set/adjust color ............................................ 16
2-4
5-1
Attaching an Arm ........................................... 28
5-2
Cleaning.......................................................... 29
5-3
Specifications ................................................ 30
5-4
Glossary ......................................................... 33
5-5
Preset Timing ................................................. 35
Off Timer/Power Saving Settings ................. 17
● To set monitor power-off time [Off Timer] ......... 17
● To set monitor power-saving
[VESA DPMS/DVI DMPM]................................ 18
2-5
Screen Size Selection.................................... 19
● To change screen size [Screen Size] ............... 19
● To adjust brightness of non-display area
[Border Intensity] .............................................. 19
2-6
Power Indicator/EIZO Logo Display Setting
......................................................................... 20
● To turn off the Power indicator while a screen is
displayed [Power Indicator] .............................. 20
● To display EIZO logo [EIZO Logo Appearing
Function]........................................................... 20
6
S2411W-U_UM_EN.indd 6
CONTENTS
4/9/2007 5:50:12 PM
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1
•
•
•
•
•
•
Features
24" wide format LCD
Applicable to HDCP
Equipped with the ContrastEnhancer and OutlineEnhancer functions
Dual-input compliant (DVI-I x 2 connectors)
DVI digital input (TMDS) compliant
Horizontal scan frequency, Vertical scan frequency and Resolution are as follows;
Horizontal scan frequency
Analog
Digital
Analog
24 - 94 kHz
31 - 76 kHz
49 - 86 Hz
49 - 76 Hz (1600 x 1200)
49 - 61 Hz (1920 × 1200)
Digital
59 - 61 Hz
69 - 71 Hz (VGA TEXT)
49 - 51 Hz ([email protected])
1920 dots × 1200 lines
Vertical scan frequency
Resolution
• Compatible with frame synchronization mode
59 - 61 Hz
49 - 51 Hz : [email protected] (Digital)
• Smoothing (soft - sharp) function for adjustment of enlarged images
• FineContrast mode to allow the best mode for screen display
• The application software “UniColor Pro” to simulate the views experienced
by people with some sort of color deficiency is included (refer to the EIZO
LCD Utility Disk)
• The utility software “ScreenManager Pro for LCD” (for Windows) to control
the monitor from a PC with mouse/keyboard is included (refer to the EIZO
LCD Utility Disk).
• The ArcSwing 2 Stand enables to adjust the monitor height and monitor angle freely
1-2
NOTE
• The stand of the unit can be replaced
with an arm or another stand. (Refer
to “5-1 Attaching an Arm” on page
28.)
Switches and Indicators
Adjustment menu (*ScreenManager ® )
Switch
1.
2.
3.
4.
5.
6.
Input signal selection switch
Auto adjustment switch
Enter switch
Control switches (Left, Down, Up, Right)
Power switch
Power indicator
Indicator status
Operation status
Blue
The screen is displayed
Orange
Power saving
Off
*
ScreenManager
Power off
®
is an EIZO’s nickname of the Adjustment menu.
NOTE
• While the screen is displayed, the
blue power indicator that is lighting
blue can be turned off (see “Power
Indicator/Logo Display Setting,” on
page 20).
• For the power indicator status with
“Off Timer” set, refer to “To set
monitor power-off time” on page 17.
Chapter 1 Features and Overview
S2411W-U_UM_EN.indd 7
7
4/9/2007 5:50:12 PM
1-3
Functions and Basic Operation
To adjust the screen and color
Main menu (Refer to page 9 for operation)
Analog input only
1
Automatic Adjustment
Touch
.
Touch
again.
Page 11
2
Screen Adjustment
Page 11
• The Adjustment menu and the FineContrast menu cannot
be displayed at the same time.
FineContrast menu
Color adjustment
Simple adjustment [FineContrast mode]
Page 14
This function allows easy selection of a desired mode
from six modes according to monitor application.
● To eliminate vertical bars [Clock*] … see page 12
● To remove flickering or blurring
[Phase*] ……………………………… see page 12
● To correct screen position
[Position*] …………………………… see page 12
● To adjust extra or cut image
[Resolution*] ………………………… see page 13
● To adjust color gradation automatically
[Range Adjustment*] ……………… see page 13
● To modify blurred characters/lines
[Smoothing] ………………………… see page 13
● To set when a noise appears on the screen
[Signal Filter*] ……………………… see page 27
*
Items marked with * can be adjusted with analog
input.
Color Adjustment
Advanced Adjustment
Page 15
● “Brightness,” “Temperature,” and “Gamma” can be set
for each mode (Custom/Movie/Picture/Text/External/
sRGB).
Settable functions vary with the display mode.
Brightness Adjustment
Touch
8
S2411W-U_UM_EN.indd 8
or
to adjust brightness.
● “Brightness,” “Temperature,” “Gamma,”
“Saturation,” “Hue,” “Gain,” “6 Colors” and
“Enhancer” can be set for each mode (Custom/
Movie/Picture/Text/External/sRGB).
Settable functions vary with the display mode.
Resuming the default settings
● To reset color adjustment [Reset] … see page 23
Chapter 1 Features and Overview
4/9/2007 5:50:12 PM
To make useful settings/adjustments
Adjustment menu (Refer to below for operation)
Power-save Settings
Page 18
● To set monitor power-saving [VESA DPMS/DVI
DMPM]
Information
Set the off timer
● To set monitor power-off time [Off Timer]
……………………………………… see page 17
Change the screen size
● To change screen size [Screen Size]
……………………………………… see page 19
● To adjust brightness of non-display area
[Border Intensity] …………………… see page 19
Power Indicator Setting
● To turn off the Power indicator while a screen is
displayed [Power Indicator] ……… see page 20
Beeper setting
● To set the beeper [Beep]…………… see page 20
Adjustment Menu Settings
● To update menu settings [Menu Size/
Menu Position/Menu Off Timer/
Translucent] ………………………… see page 21
Page 22
● To check settings, usage time, etc. [Information]
Language
● To set a language to be displayed [Language]
EIZO Logo Display Setting
● To display EIZO logo
[EIZO Logo Appearing Function] …see page 20
Locking Adjustment
Resume the factory default settings
● To reset all settings [Reset] ……… see page 23
● To lock operation [Adjustment Lock]
………………………………………see page 21
Connect two PCs
● To set priority of PC to be displayed
[Input Priority] ……………………… see page 25
Connecting Signal Cables
● Connecting Two PCs to the Monitor
………………………………………see page 24
● Connecting Peripheral USB Devices
………………………………………see page 25
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
. The Main menu appears.
(1) Touch
/
/ / , and touch
. The Sub menu appears.
(2) Select a function with
(3) Select a function with
/
/ / , and touch
. The adjustment/setting menu appears.
(4) Adjust the selected item with
/
/ / , and touch
. The setting is saved.
[Exiting Adjustment menu]
(1) Choose <Return> from the Sub menu and touch
(2) Choose <Exit> from the Main menu and touch
. The Main menu appears.
. The Adjustment menu quits.
NOTE
• The Adjustment menu can also be exited by touching
• <Exit> or <Return> can also be selected by touching the
twice quickly.
switch twice in the Main menu or Sub menu.
Chapter 1 Features and Overview
S2411W-U_UM_EN.indd 9
9
4/9/2007 5:50:13 PM
Chapter 2 Settings and Adjustments
2-1
Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the application software programs.
● Disk Contents
• Disk contents and software overview
The disk includes a monitor information file, application software programs for adjustment, and User’s Manual. Refer to
“Readme.txt” or the “Readme” file on the disk for software startup procedures or file access procedures.
Item
Overview
A “Readme.txt” or “Readme” file
For Windows
For Macintosh
○
○
○
○
Color Profiles (ICC Profiles)
Color profiles
Screen Adjustment Program
Available for easy adjustments of the
monitor screen following adjustment
patterns and procedures on the
screen.
○
○
An application software to simulate the
views experienced by some colorblind
people. (A PC must be connected to
the monitor with the supplied USB
cable.) Refer to the description later.
○
○
○
−
UniColor Pro
ScreenManager Pro for LCD (for
Windows)
A utility software program to control
monitor adjustments from a PC using
its mouse and keyboard.
(A PC must be connected to the
monitor with the supplied USB cable.)
Refer to the description later.
WindowMovie Checker Software
WindowMovie is a function of
ScreenManager Pro for LCD.
For more information, refer to the
User’s Manual of ScreenManager Pro
for LCD on the disk.
User’s Manual of this monitor (PDF file)
UniColor Pro User’s Manual (PDF file)
Color Universal Design Handbook (PDF file)
● To use UniColor Pro
For the installation and use of UniColor Pro, refer to the UniColor Pro User’s Manual on the disk.
● To use ScreenManager Pro for LCD
For the installation and use of ScreenManager Pro for LCD, refer to its User’s Manual on the disk.
10
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 10
4/9/2007 5:50:14 PM
2-2
Screen Adjustment
Digital Input
Attention
• Wait 30 minutes or more from
monitor power on before starting
adjustments.
When digital signals are input, images are displayed correctly based on the
preset data of the monitor.
Analog Input
NOTE
The monitor screen adjustment is used to suppress flickering of the screen or
adjust screen position and screen size correctly according to the PC to be used.
To use the monitor comfortably, adjust the screen when the monitor is set up for
the first time or when the settings of the PC in use are updated.
[Adjustment Procedure]
1
Attention
Touch
.
A message “Your setting will be lost, if you touch again now” appears for
five seconds.
2
• Auto adjustment is available using
the
. If satisfactory adjustment
cannot be obtained with this button,
perform advanced adjustments using
the Adjustment menu. Use “Screen
Adjustment Program” on the supplied
EIZO LCD Utility Disk.
Touch
again while the message is displayed.
The Auto Adjustment function begins (showing a running status icon) to
adjust clock, phase, display position, and resolution automatically.
• This function works correctly when
an image is fully displayed over the
Windows or Macintosh display area.
It does not work properly when an
image is displayed only on a part of
the screen (DOS prompt window, for
example) or when a black background
(wallpaper, etc.) is in use.
• This function does not work correctly
with some graphics boards.
If satisfactory adjustment cannot be obtained with the
button,
perform the adjustment following the procedure below. When the
screen is displayed correctly, go to step 5 “Range Adjustment”.
● Advanced Adjustment
3
NOTE
Run the Screen Adjustment Program.
Load the EIZO LCD Utility Disk on the PC, and start the Screen
Adjustment Program compatible with the PC in use.
After the program starts up, perform the adjustment in step 4 following the
instructions of the program.
• For how to start the Screen
Adjustment Program, refer to
“Readme.txt” or the “Readme” file.
When you are using a Windows PC,
you can run the program directly from
the start menu of the disk.
• If no adjustment program is available
for your PC, display a checkerboard
pattern on the screen (see below) and
go to the following steps.
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 11
11
4/9/2007 5:50:14 PM
4
NOTE
Perform advanced adjustments for the following using the
• Touch the control button slowly so as
not to miss the adjustment point.
• When blurring, flickering or bars
appear on the screen after adjustment,
proceed to [Phase] to remove
flickering or blurring.
<Screen> menu of the Adjustment menu.
● To eliminate vertical bars [Clock]
(1) Choose <Clock> from the <Screen> menu, and touch
.
The <Clock> menu appears.
(2) Adjust the clock with
or
, and touch
.
The adjustment is completed.
● To remove flickering or blurring [Phase]
(1) Choose <Phase> from the <Screen> menu, and touch
Attention
• Flickering or blurring may not be
eliminated depending on your PC or
graphics board.
.
The <Phase> menu appears.
(2) Adjust the phase with
or
, and touch
.
The adjustment is completed.
● To correct screen position [Position]
Since the number of pixels and the pixel positions are fixed on
the LCD monitor, only one position is provided to display images
correctly. The position adjustment is made to shift an image to the
correct position.
(1) Choose <Position> from the <Screen> menu, and touch
NOTE
• When vertical bars appear on the
screen after adjustment, go back to
“To eliminate vertical bars [Clock].”
(Clock → Phase → Position)
.
The <Position> menu appears.
(2) Adjust the position with
/
/ / to display the image
properly in the display area of the monitor.
12
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 12
4/9/2007 5:50:14 PM
● To adjust extra or cut image [Resolution]
This adjustment is available to equalize the resolution shown on the
Setting menu and the resolution of input signal.
(1) Choose <Resolution> from the <Screen> menu, and touch
.
The <Resolution> menu appears.
(2) Adjust the vertical resolution with
resolution with or , and touch
or
, and then horizontal
.
The adjustment is completed.
Extra image is displayed due to excessive dots.
A part of image is cut due to short dots.
5
Adjust the signal output range
● To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the
signal output level.
(1) Choose <Range Adjustment> from the <Screen> menu, and touch
.
A message “Your setting will be lost it you touch AUTO switch” appears.
(2) Touch
while the message is displayed.
The output range is adjusted automatically.
When using the “Screen Adjustment Program”, the program is finished.
6
Change the smoothing setting.
Attention
● To modify blurred characters/lines [Smoothing]
When a low-resolution image is displayed in the “Full” or “Enlarged”
mode, the characters or lines of the displayed image may be blurred.
(1) Choose <Screen> from the Adjustment menu, and touch
(2) Choose <Smoothing> from the <Screen> menu, and touch
• Smoothing setting may not be required
depending on the display resolution.
(You cannot choose the smoothing
icon.)
.
.
The <Smoothing> menu appears.
(3) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp)
.
with or , and touch
The smoothing adjustment is completed.
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 13
13
4/9/2007 5:50:15 PM
2-3
Color Adjustment
Simple adjustment [FineContrast mode]
This function allows you to select the best display mode for monitor brightness,
etc.
● FineContrast Mode
An appropriate display mode is selectable out of six modes.
Mode
Purpose
Custom
Available for making desired setting.
sRGB
Suitable for color matching with sRGB compatible
peripherals.
External
Switches to this External mode when you start up the
UniColor Pro and perform the simulation.
Text
Suitable for displaying texts for word processing or
spreadsheets.
Picture
Suitable for displaying images such as photos or picture
images.
Movie
Suitable for playing back animated images.
FineContrast menu
Example) Custom
Displays current mode.
NOTE
Displays current settings of brightness, color
temperature, and gamma.
• The Adjustment menu and the
FineContrast menu cannot be
displayed at the same time.
● To select FineContrast mode
(1) Touch
or
.
The FineContrast menu appears at the lower left of the screen.
(2) Choose a desired mode with
and
, and touch
Attention
.
• Color temperature values and gamma
values are fixed in some modes.
Set them as shown in “To select an
appropriate mode for images” on page
15.
The adjustment is completed.
● To update color setting of FineContrast mode
<Brightness>, <Temperature>, and <Gamma> can be set or adjusted.
(1) Choose a desired function from the FineContrast menu with
.
(2) Adjust the selected function with or , and touch
The adjustment is completed.
14
or
.
NOTE
• The <Color> menu of the Adjustment
menu allows advanced color
adjustments for each mode. Refer to
“To select an appropriate mode for
images” on page 15.
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 14
4/9/2007 5:50:16 PM
Attention
Advanced Adjustments [Adjustment menu]
Independent setting and saving of color adjustment are available for each
FineContrast mode.
● To select an appropriate mode for images
✓: Adjustment available
Icon
−: Invalid for adjustment
Function
FineContrast mode
Custom
sRGB
External
Text
Picture
Movie
*
✓
✓
✓
✓
✓
✓
Temperature
*
✓
−
−
✓
✓
✓
Gamma
*
✓
−
−
✓
−
−
Saturation
✓
−
−
✓
✓
✓
Hue
✓
−
−
✓
✓
✓
Gain
✓
−
−
−
−
−
6 Colors
✓
−
−
−
−
−
Contrast
Enhancer
✓
−
−
−
✓
✓
Outline
Enhancer
✓
−
−
−
✓
✓
✓
✓
✓
✓
✓
✓
Enhancer
Brightness
Reset
• Perform [Range Adjustment] before
starting color adjustment for analog
input signals.
Refer to “To adjust color gradation
automatically” on page 13.
• The FineContrast mode cannot be
changed during color adjustment. Set
the FineContrast mode in advance
with
/ .
• Wait 30 minutes or more from
monitor power on before starting the
color adjustment.
• Choose “Reset” in the <Color> menu
to revert to the default settings (factory
settings) of hue of the color mode
selected.
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.
* These items can also be set or adjusted with the FineContrast menu.
Menu
Brightness
Description
To adjust the full screen
brightness as desired
Adjustment range
0 to 100%
NOTE
NOTE
• You can also adjust the brightness by touching
or
button while the adjustment menu is not displayed.
after adjustment.
• Touch
• The values shown in the “%” are available only as reference.
Temperature To select a color
temperature
• The Adjustment menu and the
FineContrast menu cannot be
displayed at the same time.
• Adjustable functions vary depending
on the type of FineContrast mode.
4000K to 10000K in units of 500K
(including 9300K).
NOTE
• Setting the value to “Off” presents the natural color
temperature of the panel.
• The values shown in the Kelvin (K) are available only as
reference.
Gamma
To set a gamma value
1.4 to 3.0, Fixed
NOTE
• Digital signal input is recommended for gamma value setting.
Set a gamma value to 1.8 - 2.2 for analog signal input.
• Only when selecting <Custom> in the fine contrast mode,
“Fixed” is available.
Saturation
To adjust color saturation
–100 to 100
Setting the minimum (–100) turns
the image to a monochrome
screen.
Attention
• This function does not enable to display every color gradation.
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 15
15
4/9/2007 5:50:16 PM
Menu
Hue
Description
Adjustment range
To produce a desired skin
color, etc.
–100 to 100
Attention
• This function does not enable to display every color gradation.
Gain
To adjust red, green, and
0 to 100%
blue to a desired color tone Adjust the respective brightness of
respectively
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
NOTE
• The values shown in the “%” are available only as reference.
• When using the <Gain> setting, the <Temprerature> setting is
set to “Off.”
6 Colors
To adjust <Hue> and
<Saturation> in Red,
Yellow, Green, Cyan, Blue,
and Magenta respectively
Enhancer
On/Off
ContrastEnhancer
(Refer to page 33)
This can change the feeling
of contrast the image.
OutlineEnhancer
(Refer to page 33)
This emphasize the outline
of the image and shade it
off.
Hue: –100 to 100
Saturation: –100 to 100
-3 to 3
NOTE
• “ContrastEnhancer” and “OutlineEnhancer” are suitable
function for the playback of moving image or photograph
indication.
Reset
To reset the color settings of the selected FineContrast mode to
the default settings
● To set/adjust color
(1) Choose <Color> from the Adjustment menu, and touch
.
(2) Select a desired function from the <Color> menu, and touch
.
The selected function menu appears.
(3) Adjust the selected item with
/
/
/
, and touch
.
The adjustment is completed.
16
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 16
4/9/2007 5:50:17 PM
2-4
Off Timer/Power Saving Settings
● To set monitor power-off time [Off Timer]
This function allows the monitor to automatically turn off after a specified time
has passed. This function serves to reduce afterimages caused when the monitor
screen is left on for a long time period without use. Use this function when an
image is displayed throughout the day.
Attention
• The Off Timer functions even in the
power saving mode, but the advance
notice is disabled. The monitor power
is turned off without advance notice.
[Off Timer System]
Timer
ON time (1H - 23H)
Monitor
Power Indicator
Operating
Blue
Last 15 min. in “ON time” Advance Notice*1
Flashing blue
“ON time” expired
Off
Power Off
*1 When
is touched during the advance notice period, the monitor continues to operate for
additional 90 minutes. Extension of operation time can be set without limitation.
[Procedure]
(1) Choose <Others> from the Adjustment menu, and touch
(2) Choose <Off Timer> from the <Others> menu, and touch
.
.
The <Off Timer> menu appears.
(3) Select “Enable” with
or .
(4) Set a monitor ON time (1 to 23 hours) with
or
, and touch
.
The Off Timer setting is completed.
[Resumption Procedure]
(1) Touch .
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 17
17
4/9/2007 5:50:17 PM
● To set monitor power-saving [VESA DPMS/DVI DMPM]
■ Analog input
This monitor complies with the VESA DPMS standard.
[Power Saving System]
Attention
PC
Power
saving
Power
Indicator
Monitor
Operating
STAND-BY
SUSPENDED
OFF
• Unplugging the power cord
completely shuts off power supply to
the monitor.
• USB compliant devices connected
to the monitor work even if the
monitor is in the power saving mode.
Therefore, power consumption of the
monitor varies with connected devices
even in the power saving mode.
Operating
Blue
Power saving
Orange
[Procedure]
(1) Choose <PowerManager> from the Adjustment menu, and touch
.
The <Set> menu appears.
(2) Select “VESA DPMS” with
or
, and touch
.
The power saving setting is completed.
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.
■ Digital input
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in five seconds in connection with
the PC setting.
PC
Operating
Power saving
Monitor
Operating
Power saving
Power Indicator
Blue
Orange
[Procedure]
(1) Choose <PowerManager> from the Adjustment menu, and touch
.
The <Set> menu appears.
(2) Select “DVI DMPM” with
or
, and touch
.
The power saving setting is completed.
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.
18
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 18
4/9/2007 5:50:17 PM
2-5
Screen Size Selection
● To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is
displayed in full screen automatically. You can change the screen size by using
<Screen size> from <Others> menu.
Menu
Function
Displays an image in full screen. Images are distorted in
Full (default setting) some cases because the vertical rate is not equal to the
horizontal rate.
Enlarged
Displays an image in full screen. In some cases, a blank
horizontal or vertical border appears to equalize the
vertical rate and the horizontal rate.
Normal
Displays images with the specified resolution.
Example: Image size 1280 x 1024
Full
(Default setting)
Enlarged
Normal
(1920 x 1200)
(1500×1200)
(1280×1024)
[Procedure]
(1) Choose <Others> from the Adjustment menu, and touch
(2) Choose <Screen Size> from the <Others> menu, and touch
.
.
The screen size setting window appears.
(3) Select “Full,” “Enlarged,” or “Normal” with
or
, and touch
.
The screen size setting is completed.
● To adjust brightness of non-display area [Border Intensity]
A border (black area with no image) around the image appears in the “Normal”
or “Enlarged” mode.
Border
(1) Choose <Others> from the Adjustment menu, and touch
.
(2) Choose <Border Intensity> from the <Others> menu, and touch
.
The <Border Intensity> menu appears.
(3) Adjust border intensity with
or
, and touch
.
The border intensity adjustment is completed.
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 19
19
4/9/2007 5:50:18 PM
2-6
Power Indicator/EIZO Logo Display
Setting
● To turn off the Power indicator while a screen is displayed
[Power Indicator]
NOTE
• The Power indicator lights up at
power on with the default setting.
This function enables to turn off the Power indicator (blue) while a screen is
displayed.
(1) Choose <Others> from the Adjustment menu, and touch
.
(2) Choose <Power Indicator> from the <Others> menu, and touch
.
The <Power Indicator> menu appears.
(3) Select “Disable” with
or
, and touch
.
The Power Indicator setting is completed.
NOTE
● To display EIZO logo [EIZO Logo Appearing Function]
• The logo appears with the default
setting.
When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
[Procedure]
(1) Touch to power off the unit.
(2) Touch again while touching
.
The EIZO logo does not appear on the screen.
[Resetting]
(1) Touch to power off the unit.
(2) Touch again while touching
.
The logo appears again.
2-7
Beeper Settings
● To set the beeper [Beep]
Set the beeper on/off for operation tone of the switches, connection error, etc.
Sound type
Conditions for beeping
Short beep
• When an item is selected with
• When a maximum or minimum value is set with
the control switches
• When
is touched.
Long beep
is touched.
• When
• When registration is performed with
Consecutive beeps
• When the monitor is not connected correctly
• When the PC is not turned on
• When a frequency out of the specified range is
received
Beep-beep once every 15
seconds
• 15 minutes before the power off time set by “Off
Timer” (advance notice time)
(1) Choose <Others> from the Adjustment menu, and touch
(2) Choose <Beep> from the <Others> menu, and touch
.
.
The <beep> menu appears.
(3) Select On or Off with
or
, and touch
.
The beep setting is completed.
20
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 20
4/9/2007 5:50:18 PM
2-8
Locking Switches
● To lock operation [Adjustment Lock]
This function locks the switches to retain the status adjusted or set once.
Switches that can
be locked
•
(Enter switch) Adjustments/settings using
Adjustment menu
•
(Auto Adjustment switch)
Switches that cannot • FineContrast mode selection/adjustment using
be locked
switches
switches
• Brightness adjustment using
/
(Input Signal Selection switch)
•
(1) Touch
(2) Touch
to turn off the unit.
again while touching
/
.
The screen is displayed with the adjustment lock.
[Unlocking]
(1) Touch to turn off the unit.
(2) Touch again while touching
.
The screen is displayed with the adjustment lock released.
2-9
Setting Adjustment Menu Display
● To update menu settings [Menu Size/Menu Position/Menu
Off Timer/Translucent]
Menu Size
Change the Adjustment menu size using the following procedure.
(1) Choose <Others> from the Adjustment menu, and touch
.
(2) Choose <Menu Settings> from the <Others> menu, and touch
.
(3) Choose <Menu Size> from the <Menu Settings> menu, and touch
.
The <Menu Size> menu appears.
(4) Select “Enlarged” using
or
, and touch
.
The menu size setting is completed.
Menu Position
Adjust the menu position using the following procedure.
(1) Choose <Others> from the Adjustment menu, and touch
.
.
(2) Choose <Menu Settings> from the <Others> menu, and touch
(3) Choose <Menu Position> from the <Menu Settings> menu, and touch
.
The <Menu Position> menu appears.
(4) Select a menu position with
/
/
/
, and touch
.
The menu position setting is completed.
Menu Off Timer
Set the menu display time using the following procedure.
NOTE
• The display time of the FineContrast
menu remains unchanged.
(1) Choose <Others> from the Adjustment menu, and touch
.
(2) Choose <Menu Settings> from the <Others> menu, and touch
.
(3) Choose <Menu Off Timer> from the <Menu Settings> menu, and touch
.
The <Menu Off Timer> menu appears.
(4) Select “Enable” with
or .
(5) Choose an Off Time (15/30/45/60 seconds) with
or
, and touch
.
The menu off timer setting is completed.
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 21
21
4/9/2007 5:50:19 PM
Translucent
Set the transparency for menu display using the following procedure.
(1) Choose <Others> from the Adjustment menu, and touch
.
.
(2) Choose <Menu Settings> from the <Others> menu, and touch
(3) Choose <Translucent> from the <Menu Settings> menu, and touch
.
The <Translucent> menu appears.
(4) Adjust the transparency for menu display with
or
, and touch
.
The transparency setting is completed.
2-10 Viewing Information/Setting Language
● To check settings, usage time, etc. [Information]
This function allows you to check settings, model name, serial number, and
usage time of the monitor.
(1) Choose <Information> from the Adjustment menu, and touch
NOTE
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
.
The <Information> menu appears.
(2) Then, touch
to check settings, etc.
● To set a language to be displayed [Language]
Select the Adjustment menu language.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Japanese/Simplified Chinese/
Traditional Chinese
(1) Choose <Language> menu from the Adjustment menu, and touch
.
The <Language> menu appears.
(2) Choose a language with
/
/
/
, and touch
.
The language setting is completed.
22
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 22
4/9/2007 5:50:20 PM
NOTE
2-11 Resumption of Default Setting
● To reset color adjustment [Reset]
The hue in the color mode currently set will revert to the default settings (factory
settings).
(1) Choose <Color> from the Adjustment menu, and touch
(2) Choose <Reset> from the <Color> menu and touch
.
• For default settings, refer to “Main
default settings (factory settings)” on
page 31.
.
The <Reset> menu appears.
(3) Select <Reset> with
or
, and touch
.
The reset operation is completed.
● To reset all settings [Reset]
Reset all adjustments/settings to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and touch
(2) Choose <Reset> from the <Others> menu, and touch
.
.
The <Reset> menu appears.
(3) Select <Reset> with
or
, and touch
.
The reset operation is completed.
Chapter 2 Settings and Adjustments
S2411W-U_UM_EN.indd 23
23
4/9/2007 5:50:21 PM
Chapter 3 Connecting Cables
3-1
Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the two DVI-I connectors on
the back of the monitor.
Connection examples
DVI-I connector DVI-I connector
(SIGNAL1) (SIGNAL2)
SIGNAL1
SIGNAL2
Signal cable
(FD-C16 option)
Signal cable
(supplied FD-C16)
D-sub mini
15-pin
DVI
Signal Cable
(FD-C39 option)
Signal cable
(supplied FD-C39)
DVI
Digtal
D-sub mini
15-pin
Analog
D-sub mini
15-pin
Digital
Example 3
Signal cable
(supplied FD-C16)
Analog
Analog
Example 2
Signal cable
(supplied FD-C39)
Digital
Example 1
DVI
Selecting input signal
Input signal selection switch
Switch the input signal with
. Input signal switches each time
is
touched. When the signal is switched, the active signal type (Signal 1 or 2/
Analog or Digital) appears at the top right corner of the screen for two seconds.
24
Chapter 3 Connecting Cables
S2411W-U_UM_EN.indd 24
4/9/2007 5:50:21 PM
● To set priority of PC to be displayed [Input Priority]
NOTE
When two PCs are connected, either one can be displayed preferentially. The
monitor senses the input signal regularly. When the signal that is given priority
with the <Input Priority> setting is input, signal input switches automatically to
the prior signal.
Priority setting
1
Signal 1, input from DVI-I connector
2
Signal 2, input from DVI-I connector
Manual
Function
The priority input setting functions in
the following cases.
• When the monitor is turned on
• When the Signal 1 status changes
even when Signal 2 is displayed
• Power-saving function
When “1” or “2” is selected for
<Input Priority>, the monitor’s
power-saving function works only
when the two PCs are in the powersaving mode.
• When only one PC is connected, the
input signal is detected automatically
regardless of whether the input signal
1 or 2 has priority.
The priority input setting functions in
the following cases.
• When the monitor is turned on
• When the Signal 2 status changes
even when Signal 1 is displayed
The monitor does not detect the PC’s
signals automatically. Select an active
input signal with
.
[Procedure]
(1) Choose <Others> from the Adjustment menu, and touch
.
(2) Choose <Input Priority> from the <Others> menu, and touch
.
The <Input Priority> menu appears.
(3) Select “1” or “2” or “Manual” with
or
, and touch
.
The Input Priority setting is completed.
3-2
Connecting Peripheral USB Devices
This monitor has a hub compatible with USB. Connected to a PC compatible
with USB or another USB hub, this monitor functions as a USB hub allowing
connection to peripheral USB devices.
● Required System Environment
(1) A PC equipped with a USB port or another USB hub connected to
a USB compatible PC
(2) Windows 98/Me/2000/XP or Mac OS 8.5.1 or later
(3) EIZO USB cable (MD-C93)
● Connection Procedure (Setup of USB Function)
(1) Connect the monitor first to a PC using the signal cable, and run
the PC.
(2) Connect the supplied USB cable between the downstream USB
port of a USB compatible PC (or another USB hub) and the
monitor’s upstream USB port.
(3) When the USB function setup is completed, the monitor functions
as a USB hub allowing connection to various peripheral USB
devices through its downstream USB ports.
Upstream
Attention
• This monitor may not work depending
on PC, OS or peripheral devices to be
used.
For USB compatibility of peripheral
devices, contact their manufactures.
• If the monitor is in the power saving
mode, or if the monitor is connected
to the power outlet with the monitor
turned off, all the devices connected
to the USB ports (upstream and
downstream) work. Therefore, power
consumption of the monitor varies
with connected devices even in the
power saving mode.
Downstream
The USB function is set up automatically upon connection of the USB cable.
Chapter 3 Connecting Cables
S2411W-U_UM_EN.indd 25
25
4/9/2007 5:50:21 PM
Chapter 4 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
•
•
•
•
No-picture problems → See No.1 - No.2.
Imaging problems → See No.3 - No.14.
Other problems → See No.15 - No.18.
USB problems → See No.19 - No.20.
Problems
1.
Possible cause and remedy
No picture
• Power indicator does not light.
• Check whether the power cord is connected correctly.
• Touch
• Power indicator is lighting blue.
• Power indicator is lighting yellow.
•
•
•
•
2.
The message below appears.
Check gain setting.
Switch the input signal with
.
Operate the mouse or keyboard.
Turn on the PC.
This message appears when the signal is not input
correctly even when the monitor functions properly.
• This message appears when no signal is input.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Switch the input signal with
.
• The message below shows that the input signal is
out of the specified frequency range. (Such signal
frequency is displayed in red.)
Example:
• Select an appropriate display mode using the graphics
board’s utility software. Refer to the manual of the
graphics board for details.
3.
Display position is incorrect.
• Adjust image position so that it is displayed properly
within the display area using the <Position> adjustment.
• If the problem persists, use the graphics board’s utility
software if available to change the display position.
4.
Screen image displayed is smaller or larger than
the actual screen image.
• Adjust the resolution using <Resolution> so that the input
signal resolution equals the resolution in the resolution
adjustment menu.
5.
Vertical bars appear on the screen or a part of the
image is flickering.
• Adjust using <Clock>.
6.
Whole screen is flickering or blurring.
• Adjust using <Phase>.
26
Chapter 4 Troubleshooting
S2411W-U_UM_EN.indd 26
4/9/2007 5:50:22 PM
Problems
Possible cause and remedy
7.
Characters are blurred.
• Adjust using <Smoothing>.
8.
Upper part of the screen is distorted as shown
below.
• This is caused when both composite sync (X-OR)
signal and separate vertical sync signal are input
simultaneously. Select either composite signal or
separate signal.
9.
The screen is too bright or too dark.
• Adjust <Brightness>. (The LCD monitor backlight has a
fixed life span. When the screen becomes dark or begins
to flicker, contact your local dealer.)
10. Afterimages appear.
• Use a screen saver or off timer function for a long-time
image display.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
11. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a
on the screen.
failure.
12. Interference patterns or fingerprints remain on the • Leave the monitor with a white or black screen. The
screen.
symptom may disappear.
13. Noise appears on the screen.
• Select 1 to 4 in <Signal Filter> from the <Screen> menu
to change the mode.
• When entering the signals of HDCP system, the normal
images may not be displayed immediately.
• When utilizing [Enhancer] function, the normal images
may not be displayed since the display gradation
abnormality or noise may occur on the screen depending
on the display pattern.
14. Characters are pigmentized.
• When [OutlineEnhancer] is set excessively, the
characters on the screen may be affected to color.
15. The <Smoothing> icon on the Adjustment menu
<Screen> cannot be selected.
• <Smoothing> is disabled when the screen is displayed in
the following conditions;
• The resolution is 1920 × 1200.
• The screen size is set to Normal.
16. The Main menu of Adjustment menu does not start. • Check for Adjustment Lock function.
• Check whether the FineContrast menu is running. (Refer
to “Simple adjustment [FineContrast mode]” on page 14.)
17. The FineContrast menu does not start.
• Check whether the Main menu of Adjustment menu is
running. (Refer to “Advanced Adjustments [Adjustment
menu]” on page 15.)
18. The
• The
switch does not function when digital signal is
input.
• Check whether the buttons are locked.
switch does not function.
19. PC does not boot or connected peripheral devices • Check whether the USB cable is connected correctly.
do not work.
• Change the USB port to another one. If the PC or
peripheral devices works correctly by changing the USB
port, contact your local dealer. (Refer to the manual of
the PC for details.)
• Please perform the followings to check the status.
Reboot the PC.
Connect the PC and peripheral devices directly.
If the PC or peripheral devices works correctly without
connecting each other via the monitor (working as a USB
hub), please contact your local dealer.
20. USB function cannot be set up.
• Check whether the USB cable is connected correctly.
• Check whether the PC and OS are USB compliant. (For
USB compliance of the respective devices, consult their
manufacturers.)
• Check the PC’s BIOS setting for USB when using
Windows 98/Me/2000/XP. (Refer to the manual of the PC
for details.)
Chapter 4 Troubleshooting
S2411W-U_UM_EN.indd 27
27
4/9/2007 5:50:22 PM
Chapter 5 Reference
5-1
Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor. Use an arm or stand of EIZO option.
[Attaching]
1
Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
2
Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the
screwdriver.
3
Attach the monitor to the arm or stand.
Secure the monitor to the arm or stand using the screws specified in the
user’s manual of the arm or stand.
• Clearance between the screw holes when attach an arm or stand:
In case of 100mm × 100mm
Attention
• When attaching an arm or stand,
follow the instructions of their user’s
manual.
• When using another manufacturer’s
arm or stand, confirm the following in
advance and select one conforming to
the VESA standard. Use M4 × 12 mm
screws supplied with this monitor.
– Clearance between the screw holes:
100 mm × 100 mm
200 mm × 100 mm
– Thickness of plate: 2.6 mm
– Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables.
• Attach an arm or stand to meet the
following tilt angles of the monitor.
– Up 60 degrees, down 45 degrees
(Horizontal display)
• Connect the cables after attaching an
arm.
Arm
• Clearance between the screw holes when attach an arm or stand:
In case of 200mm × 100mm
Arm
28
Chapter 5 Reference
S2411W-U_UM_EN.indd 28
4/9/2007 5:50:23 PM
5-2
Cleaning
Clean the monitor periodically to keep the monitor clean and extend its life.
Cabinet
Clean the cabinet with a soft cloth dampened with little mild detergent.
LCD Panel
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning
paper.
• Remove persistent stains gently with a cloth dampened with little water, and
then clean the LCD panel again with a dry cloth for better finishing.
Attention
• Never use any solvents or chemicals,
such as thinner, benzene, wax,
alcohol, and abrasive cleaner, which
may damage the cabinet or LCD
panel.
NOTE
• Optional ScreenCleaner is
recommended for cleaning the panel
surface.
Chapter 5 Reference
S2411W-U_UM_EN.indd 29
29
4/9/2007 5:50:23 PM
5-3
Specifications
LCD Panel
24.1-inch (610 mm) TFT color LCD with anti-glare hard coating
Viewing angle: Vertical 178°, Horizontal 178°(CR:10 or more)
Dot Pitch
0.270mm
Horizontal Scan Frequency
Analog: 24-94kHz (Automatic)
Digital: 31-76kHz
Vertical Scan Frequency
Analog: 49-86Hz (Automatic)
(1600 × 1200: 49-76Hz, 1920 × 1200: 49-61Hz)
Digital: 59-61Hz (VGA TEXT: 69-71Hz) ([email protected]: 49-51Hz)
Resolution
1920 dots × 1200 lines
Max. Dot Clock
Analog: 202.5MHz
Digital: 162MHz
Max. Display Color
1677 million colors
Display Area (H × V)
518.4mm × 324.0mm
Power Supply
100-120 VAC ±10%, 50/60Hz 1.1A
200-240 VAC ±10%, 50/60Hz 0.55A
Power Consumption
Max.: 110W ( with USB load)
Min.: (normal mode) (without USB load): 100W
Power saving mode: 2W or less (for single signal input)
Power switch Off: 1W or less
Input Signal Connector
DVI-I connector (Applicable to HDCP) × 2
Analog Input Signal (Sync)
a) Separate, TTL, positive/ negative
b) Composite, TTL, positive/ negative
Analog Input Signal (Video)
Analog, Positive (0.7Vp-p/75Ω)
Digital Signal Transmission
System
TMDS (Single Link)
Video Signal Memory
Analog signal: 45 (preset: 30)
Digital signal: 10 (preset: 0)
Plug & Play
VESA DDC 2B
Dimensions (Main unit)
566mm (22.3 inch)(W) × 358.7-480mm (14.1-189.9 inch)(H) × 230mm (9.1 inch)(D)
Dimensions (without Stand)
566mm (22.3 inch)(W) × 396mm (15.5 inch)(H) × 85mm (3.4 inch)(D)
Weight (Main unit)
10.2kg (22.4 lbs)
Weight (without Stand)
7.8kg (17.2 lbs)
Environmental Conditions
Operating temperature: 0 °C - 35 °C
Storage temperature: -20 °C - 60 °C
Relative humidity: 30% - 80% (no condensation)
USB Standard
USB Specification Revision 2.0
USB Port
Upstream port × 1 Downstream port × 2
30
Chapter 5 Reference
S2411W-U_UM_EN.indd 30
4/9/2007 5:50:23 PM
Main default settings (factory settings)
Analog Input
Smoothing
3
FineContrast Mode
Custom
PowerManager
VESA DPMS
Screen Size
Full Screen
Input Priority
1
Off Timer
Disable
Menu Settings
Menu Size
Normal
Menu Off Timer
45sec
Beep
On
Language
English
Digital Input
DVI DMPM
Outside Dimensions
unit : mm (inch)
TILT
566(22.3)
520.4(20.5)
80(3.15)
294(11.6)
480(18.9)
372(14.6)
326(12.8)
22.8(0.9)
24(0.94)
25
(0.98)
14.5(0.57)
230(9.1)
522(20.6)
361.9(14.2)
116(4.6)
7.3
(0.29)
60.5(2.38)
357.2(14.1)
23.5(0.93)
ARCSWING
Chapter 5 Reference
S2411W-U_UM_EN.indd 31
31
4/9/2007 5:50:24 PM
Connector Pin Assignment
• DVI-I connector
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
Pin No.
C1
C2
C3 C4
C5
Signal
Pin No.
11
Signal
TMDS Data1/3 Shield
Pin No.
21
Signal
1
TMDS Data 2-
NC*
2
TMDS Data 2+
12
NC*
22
TMDS Clock shield
3
TMDS Data2/4 Shield
13
NC*
23
TMDS Clock+
4
NC*
14
+5V Power
24
TMDS Clock-
5
NC*
15
Ground (return for +5V,
Hsync and Vsync)
C1
Analog Red
6
DDC Clock (SCL)
16
Hot Plug Detect
C2
Analog Green
7
DDC Data (SDA)
17
TMDS Data0-
C3
Analog Blue
8
Analog Vertical Sync
18
TMDS Data0+
C4
Analog Horizontal Sync
9
TMDS Data1-
19
TMDS Data0/5 Shield
C5
Analog Ground (analog
R,G,&B return)
10
TMDS Data1+
20
NC*
(NC*: No Connection)
• USB port
Upstream
Downstream
Series B connector
Series A connector
Contact No.
Signal
Remarks
1
VCC
Cable power
2
– Data
Serial data
3
+ Data
Serial data
4
Ground
Cable ground
Option List
Cleaning Kit
EIZO ScreenCleaner
Signal Cable
FD-C16
FD-C39
32
Chapter 5 Reference
S2411W-U_UM_EN.indd 32
4/9/2007 5:50:29 PM
5-4
Glossary
Clock
The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in
use, when the analog input signal is converted to a digital signal for image display.
This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen.
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is
a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal
inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active Off
(power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
ContrastEnhancer
ContrastEnhancer functions to reproduce images with a taste of contrast by compensating the gamma value as well as
controlling the backlight brightness and the gain level according to the image status.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light
passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen
are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume)
passing through each color’s filter.
Gamma
Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma
Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value produces a highcontrast image.
HDCP (High-bandwidth Digital Contents Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps
to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side and
decoding them on the input side.
Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable
to HDCP system.
OutlineEnhancer
OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference between pixels
composing the images. This may improve the texture of the material and its feel of the images.
On the contrary, it also functions to reproduce the images smoothly by gradating its outline.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment is made to
adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended that range
adjustment be made before color adjustment.
Chapter 5 Reference
S2411W-U_UM_EN.indd 33
33
4/9/2007 5:50:29 PM
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor
consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all pixels are illuminated
as a full screen (1:1).
sRGB (Standard RGB)
International standard for “color reproduction and color space” among peripheral devices (such as monitors, printers,
digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for
the Internet use.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen
becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
VESA DPMS (Video Electronics Standards Association - Display Power Management Signaling)
VESA provides the standardization of signals from PC (graphics board) for power saving of PC monitors. DPMS
defines the signal status between PC and monitor.
34
Chapter 5 Reference
S2411W-U_UM_EN.indd 34
4/9/2007 5:50:29 PM
5-5
Preset Timing
The following table shows factory preset video timing (for analog signal only).
Mode
Dot clock
VGA 640×[email protected]
25.2 MHz
VGA 720×[email protected]
28.3 MHz
Macintosh 640×480
@67Hz
Macintosh 832×624
@75Hz
Macintosh 1152×870
@75Hz
Macintosh 1280×960
@75Hz
30.2 MHz
57.3 MHz
100.0 MHz
126.2 MHz
VESA 640×[email protected]
31.5 MHz
VESA 640×[email protected]
31.5 MHz
VESA 640×[email protected]
36.0 MHz
VESA 800×[email protected]
36.0 MHz
VESA 800×[email protected]
40.0 MHz
VESA 800×[email protected]
50.0 MHz
VESA 800×[email protected]
49.5 MHz
VESA 800×[email protected]
56.3 MHz
VESA 1024×[email protected]
65.0 MHz
VESA 1024×[email protected]
75.0 MHz
VESA 1024×[email protected]
78.8 MHz
VESA 1024×[email protected]
94.5 MHz
VESA 1152×[email protected]
108.0 MHz
VESA 1280×[email protected]
108.0 MHz
VESA 1280×[email protected]
108.0 MHz
VESA 1280×[email protected]
135.0 MHz
VESA 1280×[email protected]
157.5 MHz
VESA 1600×[email protected]
162.0 MHz
VESA 1600×[email protected]
175.0 MHz
VESA 1600×[email protected]
189.0 MHz
VESA 1600×[email protected]
202.5 MHz
VESA CVT 1680×1050
146.3 MHz
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Horizontal
Vertical
Frequency
Horizontal: kHz
Vertical: Hz
31.47
59.94
31.47
70.09
35.00
66.67
49.72
74.55
68.68
75.06
74.76
74.76
37.86
72.81
37.50
75.00
43.27
85.01
35.16
56.25
37.88
60.32
48.08
72.19
46.88
75.00
53.67
85.06
48.36
60.00
56.48
70.07
60.02
75.03
68.68
85.00
67.50
75.00
60.00
60.00
63.98
60.02
79.98
75.03
91.15
85.03
75.00
60.00
81.30
65.00
87.50
70.00
93.80
75.00
65.29
59.95
Polarity
Negative
Negative
Negative
Positive
Negative
Negative
Negative
Negative
Negative
Negative
Positive
Positive
Negative
Negative
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Negative
Negative
Negative
Negative
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Negative
Positive
Attention
• Display position may be deviated
depending on the PC connected,
which may require screen adjustment
using Adjustment menu.
• If a signal other than those listed in
the table is input, adjust the screen
using the Adjustment menu. However,
screen display may still be incorrect
even after the adjustment.
• When interlace signals are used, the
screen cannot be displayed correctly
even after screen adjustment using the
Adjustment menu.
Chapter 5 Reference
S2411W-U_UM_EN.indd 35
35
4/9/2007 5:50:29 PM
VESA CVT 1920×1200
193.3 MHz
VESA CVT RB 1920×1200
154.0 MHz
36
Horizontal
Vertical
Horizontal
Vertical
74.56
59.89
74.04
59.95
Negative
Positive
Positive
Negative
Chapter 5 Reference
S2411W-U_UM_EN.indd 36
4/9/2007 5:50:30 PM
Applicable to White/Silver and Black cabinet only.
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according to
some of the strictest quality and environmental requirements in the world.
This makes for a high performance product, designed with the user in focus
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and image quality in order to improve the working environment for the user
and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Energy
● Energy-saving mode after a certain time - beneficial both for the user and environment
● Electrical safety
Emissions
● Electromagnetic fields
● Noise emissions
Ecology
● The products must be prepared for recycling and the manufacturer must have a certified environmental
management system such as EMAS or ISO 14000
● Restrictions on
● chlorinated and brominated flame retardants and polymers
● heavy metals such as cadmium, mercury and lead.
The requirements includes in this label have been developed by TCO Development in co-operation with scientists,
experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in
influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays
in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
Chapter 5 Reference
S2411W-U_UM_EN.indd 37
37
4/9/2007 5:50:30 PM
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan S2411W-U
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
*
*
*
*
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the
limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (DVI - D-sub mini 15-pin, the enclosed signal cable)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
38
S2411W-U_UM_EN.indd 38
4/9/2007 5:50:30 PM
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät
und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der
zugehörenden Bedienungsanleitung angegeben.
b)Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher
als die Augenhöhe eines Benutzers in sitzender Position ist.
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.
d)Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach
hinten ≥ 5°).
e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale
Kraftaufwand dafür muß weniger als 100 N betragen.
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g)Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h)Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position
kippsicher sein.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach ISO13406-2 mit dem Videosignal, 1920 × 1200,
RGB analog, 0,7 Vp-p und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus
ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte
Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
„Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“
Nicht für Bildschirm - Arbeitsplätze geeignet
39
S2411W-U_UM_EN.indd 39
4/9/2007 5:50:30 PM
S2411W-U_UM_EN.indd 40
4/9/2007 5:50:30 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement