NEW DISPLAY USER MANUAL ADDITION MODEL SP200 2010

NEW DISPLAY USER MANUAL ADDITION MODEL SP200 2010
SP200
NEW DISPLAY USER MANUAL ADDITION
MODEL SP200 2010
2010 NEW DISPLAY VERSION 1.0
RIGHT/LEFT LIVE CONTROL PLUS-1 CRC SYSTEM
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 1 of 20
7/23/2010
SP200 New Display Features 2010
FPM & GPM
Value
Product Tank
Gauge
Right-hand operation
selected.
There is the same bar in the
upper left corner for Lefthand operation selected.
Logging
Functions
GSY Setting
Select Width
Feedback
Pan Pump
Auto/Man./Off
Spray bar
width, spray
valve on
display.
Battery value
at Node3, if
out of range
will turn
yellow than
red.
Page
fwd./back
Product
temperature
three
locations in
the system.
Air Pressure on the bypass control valve.
If this reading is out of
expected range the
gauge will change to
yellow than red.
NOTE: you can changes
all functions from the left
or right operator station
and they will be displayed
on both displays.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 2 of 20
7/23/2010
Changing the Gallons Per Sq. Yard (GSY)
Press Button 1 the box
will become white
indicating it is selected.
Than use the up/dn.
arrows to increase the
value.
When a function is selected up/dn.
Arrow increases and decreases the value.
Manual width Control
Press and hold button 2
the box will toggle from
auto to Manual.
Use this if a string
width sensor fails.
When in manual and the
box is white it is selected.
When a function is selected up/dn.
Than use the up/dn.
Arrow
increases and decreases the value.
arrows to
increase/decrease the
value. This will override
the width
sensor.
C:\Documents
and Settings\rickc\My
Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc 7/23/2010
Page 3 of 20
Return Pan Control
It will default to Auto, if
you press #6, you can
select:
1. AUTO
2. ON
3. OFF
AUTO: the pump in on
when ever the spray-bar
is on and will stay on for
15 seconds after the
spray-bar is turned off.
ON: is ON.
OFF: is OFF
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 4 of 20
7/23/2010
Calibration & Setup Pages
Editing Calibration & Set-up Values
1. To select any of the items on the calibrate or set-up pages for editing
press the button next to the item, it will change to white it is than ready
for editing.
2. Use the up/dn. Arrows to increase/decrease the value.
3. Press OK to save the value.
Calibration Page 1 of 2
Sim. FPM default is 0,
when it is set to 1 or
higher the system will
use this number for
travel speed and ignore
the FPM sensors.
G-Cal is used to adjust
the amount of actual
product applied.
1012 Factory Default
Idle speed is used to set
how many GPM the
system circulates
product when NOT
spraying.
Sim. GPM default is 0,
when it is set to 1 or
higher the system will
use this number to run
the product pump and
ignore the pump PPU.
sensors.
F-Cal is used to adjust
the foot counter to the
actual distance.
987 Factory Default
Flush default is 2 min.
for each part of the
flush cycle, if you need
to circulate the solvent
longer set the minutes
here.
Changes spray
operation from
City/Hwy mode.
Reset Default Page (button #8)
Pressing button #8
brings you to a Reset
page to select what type
of reset you want.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 5 of 20
7/23/2010
Calibration Page 2 of 2
Select w/bypass or w/o
bypass. See notes
below.
T-Cal Tank is used to
adjust the temperature
reading of the product
tank temperature.
Default is 1000
Select FB product
pump or FB Flow
Meter. See notes
below.
T-Cal LH spray-bar is
used to adjust the
temp. reading of the
LH Spray-bar.
Default is 1000
Allows the biodegradable flushing
solvent to be returned
to the product tank
instead of the flush
(EPA) tank.
T-Cal RH spray-bar is
used to adjust the
temp. reading of the
RH Spray-bar.
Default is 1000
English Metric
selection
Used to set the size of
the product tank,
SP200’ are 2100
gallons.
Default value is 2100
1.
2.
3.
4.
Using the temperature (T-Cal numbers)
To select any of the items on the calibrate or set-up pages for editing
press the button next to the item, it will change to white it is than ready
for editing.
Use the up/dn. Arrows to increase/decrease the value.
Press OK to save the value.
Note: because these are resistive type temperature sensors it may be
necessary to adjust the T-Cal because of wire resistance, etc.
With or Without Bypass Valve
1. By pressing button #5 it toggles between w/bypass & w/o bypass.
a. With bypass: is the standard SP200 operation, anytime the
system is calling for less than 5gpm the computer holds the
product pump at 5gpm and controls the air pressure on the
bypass valve allowing the extra product to be bypassed back to
the tank.
b. Without bypass: the computer will maintain 50psi on the bypass
valve at all times, and allow the product pump to run down as low
as required (to zero if necessary.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 6 of 20
7/23/2010
Feedback Product Pump or Flow Meter
1. By pressing button #6 it toggles between FB product pump & FB Flow
Meter.
a. FB Product Pump: is the standard SP200 operation, there is a
PPu sensor in the hydraulic motor running the product pump, the
computer calculates the GPM by using the RPM of the product
pump.
b. FB Flow Meter: this system uses an actual flow meter in the
pump outlet line.
Select LH Extension by
pressing and holding
button #1 for 2
seconds
Extension Set-up Page
Select RH Extension by
pressing and holding
button #5 for 2
seconds
Select extension width
by selecting LH or RH
using button 2 or 6
than use the up & dn
arrows.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 7 of 20
7/23/2010
Nozzles A, B, C Manual Over Ride
Press and hold
Button 7 for
2 seconds to enter
Nozzle Override Mode
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 8 of 20
7/23/2010
Diagnostics Menu (selection page)
The center will display the node number and
the Version of the software in that node.
The next few pages will shoe
each diagnostics page.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 9 of 20
7/23/2010
Node not communicating with the rest of the system will flash in the center of the display,
which node is not communicating.
Switch diag. screen will test the RH switches or the LH switches,
which ever operator mode you have selected.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 10 of 20
7/23/2010
PPU diag. page: you can look at the frequency of the pulse pickup sensors.
Also shows the command GPM from the computer and the actual FB GPM.
Note: reference only!
a. Speed sensors 280 Hz = 30 FPM
b. Pump sensor 55 Hz = 14 GPM
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 11 of 20
7/23/2010
Sensors Gauges Values
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 12 of 20
7/23/2010
Battery Sensors Values
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 13 of 20
7/23/2010
Requirements for Spray
This is a graphical representation of the three requirements for the spray-bar to turn ON.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 14 of 20
7/23/2010
Product Load Pump, Control System
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 15 of 20
7/23/2010
Spray-bar Air Valve Faults
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 16 of 20
7/23/2010
Spray-bar Air Valve Faults
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 17 of 20
7/23/2010
Help Menus
To reach the help screen for item, hold the button associated with that item and the ESC button.
Note: the help menu’s have not text at this time.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 18 of 20
7/23/2010
Example of a Sensor Fault Alert
Blinking Warning Light
Also if the fault is high Level the spray
system will shut down and window will
pop-up telling the operator about the fault.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 19 of 20
7/23/2010
Tank Gauge Calibration
The tank sensor is calibrated at the factory when the mechanical tank gauge is calibrated, these numbers
are recorded for each SP200 starting at s/n112, and a copy placed in the right valve box.
•
•
•
If the computer system looses the calibration or node2 is replaced, you can use the service tool to put
those values back into node2.
You can also use the service tool to set the default valves which will set your tank gauge close. (it is not
calibrated by doing this).
You can also do a calibration in the field by filling your tank with a calibrated meter and following the
below instructions.
C:\Documents and Settings\rickc\My Documents\BC Documents\Sales Specs-Brochures Server\Manuals\Roadtec\SP200 New Display 2010.doc
Page 20 of 20
7/23/2010
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement