V-Chip
For models:
AV.36260
AV.36230
AV.32260
AV.32230
AV-27260
COLORTELEVISION
USER'SGUIDE
IIlustratiorl
IMPORTANT
of AV 32260 and RM C30_
NOTE T0 THE CUSTOMER
In the space below, enter the serial number of your television (located at the rear
i
of the television cabinet). Staple your s!!es receipt or invoice to the inside cover
of this guide. Keep this user s guide in a convenient place for
J
future reference. Keep the carton and original packaging for future use.
Serial Number
Model Number
LCT0951-001A-A
0201-TN-JII-JIM
IMPORTANT SAFETY PRECAUTIONS
CAUTION: To reduce the risk of electric shock.
Do not remove cover (or back).
No user serviceable parts inside.
Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert
the user to the presence of uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS TV SET TO RAIN OR MOISTURE.
CAUTION:
TO INSURE PERSONAL SAFETY, OBSERVE THE
FOLLOWING RULES REGARDING THE USE OF
THIS UNIT.
1 Operate only from the power source specified on the unit
2, Avoid damaging the AC plug and power cold.
3, Avoid improper installation and never position the unit where good
ventilation is unattainable,
4. Do not allow objects or liquid into the cabinet openings,
5, In the event of trouble, unplug the unit and call a service technician
Do not attempt to repair it yourself or remove the rear cover
Changes or modifications not approved by JVC could void the warranty
* When you don't use this TV set for a long period of time, be sure to
disconnect both the power plug from the AC outlet and antenna for
your safety
* To prevent electric shock do not use this polarized plug with an
extension cord, receptacle or other outlet unless the blades can be
fully inserted to prevent blade exposure,
IMPORTANT
SAFEGUARDS
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions
and manufactured
tial electrical
This TV set has been engineered
to assure your personal safety But improper
shock or fire hazards
use can result in poten-
In order not to defeat the safeguards
incorporated
in
this TV set, observe the following basic rules for its installation, use and servidng
And also fellow all warnings and instructions marked on your TV set,
INSTALLATION
1 Your TV set is equipped
with a polarized AC line plug (one blade of the plug is wider
than the other),
(POLARIZED=TYPE)
This safety feature allows the plug to fit into the power outlet only one way Should
you be unable to insert the plug fully into the outlet, try reversing the plug,
Should it still fail to fit, contact your electrician,
2 Operate the TV set only from a power source as indicated on the TV set or refer to the
operating
instructions for this information
If you are not sure of the type of power
supply to your home, consult your TV set dealer or local power company
operation,
3 Overloaded
For battery
refer to the operating instructions,
AC outlets and extension cords are dangerous, and so are frayed power
cords and broken plugs They may result in a shock or fire hazard, Call your service
technician for replacement
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV
set where power cord is subject to traffic or abuse
hazard
This may result in a shock or fire
5 Do not use this TV set near water -- for example, near a bathtub, washbowl, kitchen
sink, or laundry tub, in a wet basement, or near swimming
pool, etc
6 If an outside antenna is connected to the TV set, be sure the antenna system is
grounded so as to provide some protection against voltage surges and builbup static
charges, Section 810 of the National Electrical Code provides information with
respect to proper grounding
of the mast and supporting
lead-in wire to an antenna discharge
antenna discharge
unit, connection
structure, grounding
unit, size of grounding
requirements
conductors,
for the grounding
of the
location of
electrode
7 An outside antenna system should not be located in the vicinity of overhead
power
lines OFother electric light OF power circuits, or where it can fall into such power lines
or circuits, When installing an outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as contact with them might be
fatal
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
LEAD TN
CLaN _
I)IS(I_
I_11
(_,[C SEt]ION
_I_L_[(
/_
_...
• C
8 TV sets are provided
8_2_)
DT21GC_DLL_TORS
PO_ER SE_]I(E
G_k_TNG
EU:_
S'_TI_
_C /_rCLE 25_, PARTIf)
_T_C_L ELECFRTC
CO_
with ventilation openings in the cabinet to allow heat generated
during operation te be released
Therefore:
-- Never block the bottom ventilation slots of a portable TV set by placing it on a
bed, sofa, rug, etc
-- Never place a TV set in a "built-in" enclosure unless proper ventilation is provided
-- Never cover the openings with a cloth or other material
-- Never place the TV set near or over a radiator or heat register,
9 7o avoid personal injury:
-- De not place a TV set on a sloping shelf unless properly secured,
-- Use only a cart or stand recommended
by the TV set manufacturer
-- Do not try to Foil a cart with small casters across thresholds or deep pile carpets
-- Wall or shelf mounting should follow the manufacturer's
use a mounting
kit approved
instructions,
and should
by the manufacturer
USE
10 Caution children about dropping or pushing objects into g]e 7V set tJTroughcabinet openings
Some internal parts carry hazardous voltages and contact car] result in a fire or electrical shock,
11 Unplug the TV set from the wall outlet before cleaning, Do not use liquid or an
aerosol cleaner
12 Never add accessories
to a TV set that has not been designed for this purpose
Such additions may result in a hazard
13 Foraddedprotection
ofthefVsetduring
alightning
storm
orwhentheTVsetistobeleft
unattended
foranextended
period
oftime,unplug
itflorathewalloutlet
anddisconnect
theantenna,
Thiswillprevent
damage
toproduct
duetolightning
storms
orpower
line
surges,
14 ATVsetandcartcombination
should
bemoved
with
careQuickstops,
excessive
force,
anduneven
surfacesmaycause
theTVsetandcartcombination
to
overturn
SERVICE
15 Unplug this _fV set from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A When the power cord or plug is damaged
or frayed
B If liquid has been spilled into the TV set
C If the TV set has been exposed to rain or water,
D If the TV set does not operate normally by following the operating instructions,
Adjust only those controls that are covered in the operating
instructions
improper adjustment of other controls may result in damage
as
and will often require
extensive work by a qualified technician to restore the TV set to normal operation,
E If the TV set has been dropped
or damaged in any way
F, When the TV set exhibits a distinct change in performance
need for service
-- this indicates a
16 Do not attempt to service this TV set yourself as opening or removing covers may
expose you to dangerous
voltage or other hazards,
Refer all servicing to qualified
service personnel,
17 When replacement
that the replacement
parts are required, have the service technician verify in writing
parts he uses have the same safety characteristics
inal parts Use of manufacturer's
shock, or other hazards
specified
replacement
as the orig-
parts can prevent fire,
18 Upon completion of any service or repairs to this TV set, please ask the service technician ta perform the safety check described in the manufacturer's service literature,
19 When a _V set reaches the end of its useful life, improper disposal could result in a picture tube implosion Ask a qualified service technician to dispose of the TV set,
20 Note to CA]V system installer
This reminder is provided to call the CA-fV system installer's attention to Article 82040 of the NEC that provides guidelines for proper grounding
ifies that the cable ground shall be connected
and, in particulal, spec-
to the grounding
ing, as close to the point of cable entry as practical,
system of the build-
Unpacking
Your Television
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new television,
please check to make sure you have ali of the following items. In addition to this guide, your television
box should include:
1 Television
1 Remote
Control
Two AA
Batteries
A matching TV stand
is also available (sold
separately).
Note: Your television
and/or remote control
may differ from the
examples illustrated
here.
AV-32260
RM-C305
satellite system and to connect the audio/video devices you want to use with your television. To
l Once
make these
you have
connections
unpacked you
yourwilltelevision,
use plugsthe
likenext
the step
ones isillustrated
to connectbelow.
it to your antenna, cable or
RF Connectors
Used to connect a
coaxial cable from an
external antenna or
Cable TV system.
S-Video
AN
Input
Plug
Used to connect
audio/video
devices
VCRs,
players,
DVD
stereo amplifiers,
consoles, etc.
like
game
Plug
Used to make video
connections with
some VCRs, DVDs,
Camcorders, etc.
AV Compu Link Cable
Used to connect JVC AV
Compu Link capable
components for an
automated home theater.
We recommend that before you start using your new television, you read this entire User's Guide so
you can learn about your new television's many great features. But if you're anxious to start using
your television right away, a quick setup guide follows on the next three pages,
6
Getting
Started
These quick setup pages will provide you, in three easy steps, with the basic information you need
to begin using your new television right away. This information includes basic instructions on
operating your remote control, making a simple cable/antenna and optional VCR connection and,
finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information
sections of this guide.
Step One -The
Remote
on any of these steps, please consult other
Control
The remote controI is the key to operating your television's many great features. Before you can
operate your remote control, you first need to install the batteries (included).
Slide the cover on the back of the remote down towards the bottom of the remote control. Insert two
batteries carefully noting the "+" and "-" markings, placing the "-" end in the unit first. Slide the
cover back into place.
Basic Operation
Turn the television on and off by pressing the POWERbutton at the top right corner of the remote.
Remote Power
Button
Remote Key Feature Buttons
The four key feature buttons at the center of the remote can be used for basic operation of the
television. The top and bottom buttons will scan forward and back through the available channels.
The right and left buttons will turn the volume up or down. These buttons are also marked with four
arrows and are also used with JVC's onscreen menu system. You wilI need to use these buttons
later in the Quick Setup Section.
The next step is to connect your television to an antenna or cable.
Proceed
to Step Two _=
7
Step Two - Making
Basic Connections
Next you will need to connect your television to an antenna or"cable system. The most basic
antenna/cable connection is shown below. For more detailed connections, such as ones where a
cable box is required, see pages 11 to 13.
CABLE
WALL
o/ANTENNA
OUT
N---Cable/RF
connector
1) Connect an RF cable out from the wall outlet in to the RF Input on the back of the TV.
You may also wish to connect a VCR at this point. A basic VCR connection is shown below. For
detailed instructions on connecting other components or a home theater system, see pages 14 to 16.
Note: A VCR is not required to operate your television.
AV Cables/Plugs
1) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input
jack, OR connect an S-Video cable from the VCR's S-Video Output, to the TV's S-Video Input.
2) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left Audio
Input jack.
3) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
Audio Input jack.
Finally, once you have finished your connections,
and turn on the television.
Proceed
8
plug the power cord into the nearest power outlet
to Step Three
Step Three -The
When
some
found
using
Tuner
Setup
Plug In Menu
you turn your television on for the first time the Plug In Menu will appear. This menu sets
of the basic settings for your television. A complete description of the Plug In Menu can be
starting on page 22. We recommend you complete the Plug In Menu items before you start
your television. But to begin watching your television right away you only need to run the Auto
Setup. This lets your television learn the channels it is able to receive. To run the Auto Tuner
follow the steps below.
PLUG IN MENU
[_
r_::=l_..
LANGUAGE
ENG FRE
AUTO TUNER SETUP
SPA
FINISH
SELECT
OPERATE
BY I'_'II_'I
BY I'_11_
EXITBY_
Press the AV
buttons to move to AUTO TUNER SETUP
Pressthe _1•
buttons to begin AUTO TUNER SETUP
TUNER MODE
i
CABLE
AIR
START
_1 •
AT
To choose CABLE (if you are connected
an antenna)
To move to START
_1 •
To start Auto Tuner Setup
The Auto Tuner will now memorize all of the dear,
receive. This will take one or two minutes.
to a cable system)
active channels
or AIR (if you use
your television
can
PROGRAMMING
I
NOW
48
The Auto Tuner is finished when the message PROGRAMMING
OVER! appears onscreen.
Your Quick Setup is now complete. You can now begin watching your television, or you can continue on
in this guide for more information on connecting audio/video devices, programming your remote control,
or using the JVC onscreen menu system to customize your television viewing expedence.
(_C¢
The Quick Setup
_/
is complete
9
Table of Contents
Quick Setup Guide
CONNECTIONS
Cable and VCR Connections
....
.......
7
11
Connecting
Connecting
Connecting
to a DVD Player .......
to an External Amplifier
to a Camcorder .......
14
15
15
Connecting
to JVC AV Compu
Link
16
Remote Control
Remote Control Bz_sics.....
17
Changing the Batteries .....
Remote Programming
..........
CATV and Satellite Codes .........
VCR Codes ................
17
18
18
19
DVD Codes ................
20
GETTING
MENU
STARTED
FUNCTIONS
Using the Guide .............
Plug In Menu
hltroduction ..........
21
Language ...........
Auto Tuner Bc,tup .......
Autu Cluck Set .........
Manual Clock Set........
Finish ..............
.............
.............
34
34
Noise Muung .........
Set Video Szatus ........
35
35
36
36
36
Sound)
TVSpeaker
..........
Closed Caption ........
Sleep Timer
Hype_ Surround
Muting
100+
Return+
41
41
41
42
42
nput
VCR Button<
DVD Buttons
TV/CAT
Switch
CR/DVD Swltc
PIP (Picture In P ctum
IN[[OGUC[IOn
On/Move
F_eezc
SwaL
Channel
%ourc_
42
43
43
43
43
T_ou Dlosnoot_r g
War[ant,
Authorized Servce
Search C aes
34
34
34
MTS (Multi channel
Items
On/Off Timer ..........
40
40
40
41
APPENDICES
Picture Settings
Tint ...............
Color ..............
Picture
.........
General
Menu
Exit and P P Off
D spla_
Video Status
22
22
23
24
24
25
26
33
Sound Settings
Bass ..............
Treble .............
BalL_nce ............
FUNCTIONS
22
Channel Summary ............
V Chip ...................
Set Lock Code .........
Bright
Detail
BUTTON
36
37
38
39
Sr }c flcations
}enters
44
44
45
45
45
45
46
47
49
50
51
Connections
Cable and VCR Connections
There
are three
basic types
of antenna
or cable
connections:
• if you have an antenna or have a cable system that does not require you use a cable box to
select channels, please refer to Diagram #f.
• if you have a cable system that requires the use of a cable box to access all the channels,
please refer to Diagram #2. If you cannot operate your Picture-in-Picture function using Diagram
#2, try the connection shown in Diagram #3. It is possible your cable box allows the signal of only
one channel al a time to be sent 1o your television.
• if you have a cable sysIem mat requires the use of a cable box to access certain premium
channels. 3ut not "basic" cable channels, please refer 1o Diagram #3
• For your convenience
connecuon [o a VCR is also shown in the following alagrams. A VCR is
nor necessary for operation of the television or Picture-In-Picture
,'PIP) function. You may omit the
VCR from your connections if you wlsn.
• For nstructJons on connecting
• For information
• The PIP feature
a VCR only, please see the OUiCK Setup on page 8.
on using PiP, please see page 44.
is available on models AV-36260
Diagram #1
CABLE
AV-32260 and AV-27260 only
WALL
or ANIENNA
OU
TWO-WAY
SPUTTER
_
VCR
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the RF input on the
back of the VCR.
3) Connect an RF cable from the other the RF Output on the splitter, in to the RF input on the
back of the TV.
4) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video input.
5) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left Audio
Input Jack.
6) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
Audio Input jack.
If your VCR is a mona sound unit, it will have only one Audio Out jack. Connect it to the TV's
Left Audio input.
Please consult your VCR's owner's
manual for more information on its operation.
11
Connections
Cable and VCR Connections
- Continued
Diagram #2
CABLE
WALL
or AN/E
NNA
OUT
P-,
VCR
L
®
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of
the VCR.
3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the TV.
4) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video input
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video input.
5) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left Audio
Input Jack.
6) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
Audio Input jack.
Please see page 44 for information on using the PIP feature with a Cable Box.
If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV's
Left Audio Input.
Please consult your VCR's owner's
12
manual for more information
on its operation.
Connections
Cable and VCR Connections
- Continued
B
Diagram #3
CAL_L
WALL
of ANI
NNA
ou_
TWO WAY
SPLETTE_4
VCR
iN
vV
L
R
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the cable box RF Input.
3) Connect an RF cable from the Cable Box Output, in to the VCR RF Input.
4) Connect an RF cable from the other the RF Output on the splitter, in to the RF input on the back of
the TV.
5) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input jack, OR
connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video input.
6) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left Audio Input
jack.
7) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right Audio Input
jack.
•
Please see page 44 for information
•
if your VCR is a mono sound unit, it wiil have only one Audio Out jack. Connect it to the TV's
Left Audio Input.
•
Please consult your VCR's owner's
The connection
on using the PIP feature with a Cable Box.
manual for more information
on its operation.
diagrams are intended to show some basic general connections.
Some
cable companies may require special connections to properly use your television or
2-tuner PiP function. If you follow these diagrams and either the television or PIP does not
work properly, contact your local cable Operator for more Connection information. Please
see page 44 for more information
on the PIP feature.
13
I
I
I
Connections
Connecting
to a DVD player
AUDIO
R
OUT
L
Green
Blue
Red
1) Connect Green cable out from DVD player "Y" Component Output, in to TV "Y" Component Input.
2) Connect Blue cable out from DVD player "PB"Component Output, in to TV "PB" Component Input.
3) Connect Red cable out from DVD Player "PR" Component Output, in to TV "PR" Component Input.
4) Connect White Audio cable out from DVD Left Audio Outp_, in to TV Left Audio Input 2.
5) Connect Red Audio cable out from DVD Right Audio Output, in to TV Right Audio Input 2.
Green, blue and red are the most common colors for DVD cables. Some models may vary colors,
please consult the user's manual for your DVD Player for more information.
Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set
of connections (DVD or Audio Output) before starting the other to avoid accidentally switching the
cables.
See page 20 for instructions on programming your remote control to operate the basic functions of
your DVD player.
NOTE: Progressive DVD Players (players with an output scan of 31.5 KHz) will not work properly
with this television.
14
Connections
Connecting
to an External Amplifier
LEFT FRONT
8PF_R
FUGNTFRONT
8pF_
1) Connect the white audio cable from the TV's Left Audio Output jack to the Amplifier's Left Audio Input jack.
2) Connect the red audio cable from the TV's Right Audio Output jack to the Amplifier's Right Audio Input jack.
Also see "TV Speaker" on page 38 for more information on using external speakers.
Connecting
to a Camcorder
You may connect a camcorder to your television
also connect a game console or other equipment
conso es may a so be connected
by using the front input jacks (Input 3).You may
using these jacks. Camcorders
and game
to the te ev s on s rear nput acks.
CAMCORDER
Illustration of AV-32260
1) Connect the yellow video cable out from the Camcorder's
Input jack.
Video Output, in to the TV's Video
2) Connect the white audio cable out from the Camcorder's
Audio Input jack.
Left Audio Output, in to the TV's Left
3) Connect the red audio cable out from the Camcorder's
Audio Input jack.
Right Audio Output, in to the TV's Right
If your Camcorder is a mono sound model it will have only one audio jack. Connect it to the
TV's Left Audio jack.
The front thput jacks (Input 3) of models AV-36260 and AV-36230 are located under the front
panel door.
15
Connections
Connecting
to JVC AV Compu
Link
JVC's AV Compu Link EX feature makes playing video tapes or DVDs totally automatic. Simply
insert a pre-recorded tape* into your AV Compu Link EX compatible JVC-brand VCR or DVD into
your 3VC DVD player and the device wilI automatically turn on and begin playback. At the same
time, using the AV Compu Link, the VCR or DVD playe r sends a s!gnal tO the television telling it
tooturn on and switch to the proper video input,
The AV Compu Link cable may be included with the 3VC AV Compu Link accessory
connect.
you wish to
If it is not, contact an authorized JVC Service Center for part # EWP 805-012.
• AV Compu Link can only be used with JVC-brand
products.
VCR or DVD player
To Connect: Plug one end of the AV Compu Link cable into the AV Compu Link EX input on your VCR,
DVD, or other Compu Link device. Plug the other end of the AV Compu Link EX cable into the AV
Compu Link input at the rear of the television.
NOTES:
* In order for the VCR playback to begin automatically, the recording tab must be removed from the
VHS tape. If the tab is in place, automatic switching wil! occur when you push the VCR'S PLAYbutton.
• The AV Compu Link cable has a male 3.5 mm (mono) plug on each end.
• ffyour JVC-brand VCR has "A Code/B Code Remote Control Switching" (see your VCR'S user's guide),
using VCR A Code wil! switch the 73/to input 1.
• To connect a JVC HiFi receiver or amplifier for a completely, automated home theater, see the HiFi's
connection instructions in its user's guide for detailed connection information.
• AV COMPU LINK EXis compatible with the following receivers: RX-664V, RX-665V, RX-668VBK,
RX-774V, RX-778VBK, RX-884V, RX-888VBK, RX-IO24V, RX-1028VBK, and later receiver models.
16
Remote Control
RM-C305
Remote Control Basics
• Before you can operate the remote control, you must first install
the batteries (included). See "Changing the Batteries" at the
bottom of this page for instructions. (For an illustration, please see
page 7.)
• Press the POWERbutton to turn the television on or off.
• Make sure the TV/CATV switch is set to TV. Move the switch to
CATV only if you need to operate a cable box.
• Slide the VCR/DVD selector switch to VCR to control a VCR,
slide to DVD to control a DVD player. Please see pages 18 to
20 for instructions on programming your remote control to
operate a Cable box, VCR or DVD player.
• Press the CH+ and CH- buttons to scan through the channels.
Tap the CH+ or CH- button to move through the channels one
channel at a time.
• To move rapidly through the channels using JVC's Hyperscan
feature, press and hold CH+ or CH-. The channels will zip by at
a rate of five channels per second.
• Press VOL+ or VOL - to raise or lower the volume. An indicator
bar will appear onscreen to show you the television volume
level.
• The CH+/- and VOL+/- buttons are also used to navigate JVC's
onscreen menu system.
• You can directly access specific channels using the 10-key pad.
• For more information on remote control button features, see
pages 40 to 45. For information on using the onscreen menus,
see page 21.
Notes: Remote control model RM-C305
is shown at the left.
A different model remote control may have come with your
television.
Changing the Batteries
Push down on the remote's back cover and slide towards the bottom to remove it.
Insert two AA batteries (supplied), carefully noting the "+" and "-" markings on the batteries and on
the remote control. To avoid a potential short circuit, insert the "-" end first. Be sure to use only size
AA batteries.
When batteries are installed, slide the cover back into place (until it clicks into position).
• If the remote control acts erratically, replace the batteries. Typical battery life is six months to one
year. We recommend using alkaline batteries for longer battery life.
When you change the batteries, try to complete the task within three minutes. If you take longer than three
minutes, the remote control codes for your VCR, DVD, and/or CalVe Box may have to be reset (see page 18-20).
17
Remote Programming
Setting the CATV, VCR and DVD Codes
You can program your remote to operate your cable box, satellite receiver, VCR or DVD
player by using the instructions end codes listed below. If the equipment does net respond to any
of the codes lis!e d be 0w Or to the code searc h fuect on use the remote €°ntr0 supp ed bY the
manufacturer.
Cable Box or Satellite
setup
The remote control is programmed with CATV and/or Satellite codes for power on, power off,
channel up, channel down, and 10 key operation.
1) Find the CATV/Satellite brand from the list of codes shown below.
2) Slide the 2-way selector switch to "CATV".
3) Press and hold down the DISPLAYbutton.
4) With the DISPLAYbutton held down, enter the first code number listed using the 10 key pad.
5) Release the DISPLAYbutton.
6) Confirm the operation of the Cable Box/Satellite receiver.
• If your CATV or Satellite box does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function, on page 50.
ABC
O24
Puser
O32
Archer
032, 025
RCA
061,070
Cablevlew
051,032
Realistlc
O32
Regal
058, 064,040,
041,042,045,
O68
Citizen
022, 051
Curts
058, 059
Diamor/d
024, 032, 025
Eagle
029
Eastern
034
GC Brand
032, 051
Gemini
022, 043
Genera_I_strument 065, 024, 025,
026, 027,020,
021,022, 057,
023
18
Regency
O34
Rembrandt
037, 032,051,
O38
Samsung
051
Scientific Atlanta
057, 058, 059
$LMark
051,047
Sprucer
051,056
Stargate
032, 051
Hamlln
040, 041,042,
045, 058, 064
Telecaption
067
Hitachi
049, 024
Televlew
047, 051
Jerrold
065, 024,025,
026, 027,020,
021,022,057,
O23
Texscan
044
To€ore
035, 036, 066
Toshiba
O5O
Ur/ika
032, 025
Macom
049, 050, 051,
054
O33
Ur/iversal
Magnavox
022, 032
Memorex
O3O
Videoway
052
Movletime
032, 051
Viewstar
029, 030
Oak
039, 037,048
Zenith
063, 046
Panasonlc
055, 056, 060,
071
Zenith/Drake
Satellite
046
Paragon
O63
Phillps
028, 029, 030,
052, 053, 031,
069
Pioneer
047, 062
Pulsar
051,032
Echos[ar
100,113,114
Express VU
100,113
GE
106
GI
108
Gradlente
112
Hitach_
104,111
HNS (Hughes}
104
Panasonlc
105
PhHips
102,103
Primestar
108
Proscan
106,109,110
RCA
106,109,110
Sony
107
Star Choice
104,108
Toshiba
101
Ur/ider_
102,103
I
Remote Programming
VCR setup
The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward,
rewind, pause, record, channel up, and channel down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR'.
3) Press and hold down the DISPLAYbutton.
4) With the DISPLAYbutton held down, enter the first code number listed with the 10 key pad.
5) Release the D_SPLAYbutton.
6) Confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to any
code, try the Search Codes Function, on page 50.
• Some manufacturer's VCR's may not respond to the TV/VCR button, even if other buttons work properly.
• To record, hold down the REC button on the remote and press PLAY.
iiiiii;_i_i_i_;iiii;;iiiii;;iiiii;;iiiii;;iiiii;;iii:_s_iiiiil;il;ii
Admlral
035
Marantz
003004,005
A_wa
027,032,095
Marta
064
Akai
029,072,073
074
Samsun 9
037, 060 062,
033, 089
089
Memorex
024067
Samtron
MGA
038,040,047,
048041,042
Sansul
003, 026 020,
O52
Audio Dynamic
003, 005
Bell & Howell
063, 071
Minolta
058045,093
Sanyo
020,026,094
Mitsublshi
063, 067 091,
071
Broksonlc
Canon
023,025
Scott
CCE
043
038,040,047,
048,041,042,
078090
Citizen
064
059, 060 062,
067, 038 040,
047, 048 026,
O20
Craig
063, 029, 064
Sears
Curtis Ma_es
045, 024, 027
093
Dae_oo
043,059,024,
092
063, 064 065,
066, 058 000,
001
075
DBX
DimensJa
003004,005
045 093
Emerson
043,026,077,
061,025,042,
020076
Fisher
Funai
Multitech
047027,062
NEC
003,004,005,
000
Olympic
024023
Optlmus
028,021,035,
064
Orion
026,020
Panason{c
023,024,021,
022
Penney
063,066, 067,
065071,091
Perlta×
027,026,020,
000
Phiico
Shalp
035, 036 080,
088
Signature 2000
027, 035
Singer
075
Sony
028, 029, 030,
053, 054 055
SV 2000
027
058,005,045,
093
Sylvanla
031,024,027,
023,026,020,
043
031,023
O27
Symphonic
027, 081
Tashlro
064
Tatung
003, 004 005
Teac
003, 004 027,
O05
Technics
021,022
O24
Teknika
024, 027 070
Toshiba
059, 046 079
024,058,045,
063,003,004
005,093
GE
033045,
Go Video
037, 051049,
050089
Phi{ips
031,023,024,
086
064
Pioneer
023
Proscan
045,058,023,
024,031,C46,
059,060,033,
087,093
Goldstar
Gradiente
Hitachi
024
083,084,081,
000001
023,045, 058,
027081,093
Ins_ant Replay
024 023
Jensen
003
JVC
000,001,002,
003004,005
Kenwood
003,004,064
005
LXI
027,064,058,
065,066,063,
067
Magnavox
031,023024,
086
Quasar
021,022,023,
024
Radio Shack
033,024,063,
036,067, C40,
027
RCA
033,045,058,
023,024031,
046,059060,
083,084085,
087,093
Realistic
Shintom
024,
023,
Vector ResearcP 005
Wards
035, 036, 067,
044, 064
Yamaha
063, 003 004,
005
Zenith
C44, 082 064,
094
024, 063, 036,
067, 040, 027
19
Remote Programming
DVD setup
The remote control is programmed with DVD codes for power on, power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
3) Press and hold down the DISPLAYbutton.
4) With the DISPLAYbutton held down, enter the first code number listed with the 10 key pad.
5) Release the DISPLAYbutton.
6) Confirm the operation of the DVD player'.
• If your DVD player does not respond to the first code, try the others listed. If it does not respond
to any code, try the Search Codes Function, on page 50.
• After you program your remote, some DVD buttons may not work propedy, if some buttons do not
work propedy, use the remote control which came with your DVD player.
O43
O4O
Raite
O33
RCA
Sampo
021,026
O34
Kenwood
020,037
030,031
000
O35
Konka
O39
Mitsubishi
O25
041
Aiwa
Apex
Denon
Hitachi
JVC
Onkyo
Oritron
Panasonic
Philips
Pioneer
20
Sharp
O3O
O28
Silvania
O38
Sony
024,045,046,
O47
Samsung
Technics
O2O
O44
O2O
Toshiba
023,036
O22
Yamaha
O23
O42
O2O
Zenith
027,032
Wave
Onscreen
Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your new
television. The ones you will see most frequently are:
A'IF
Up and
let you:
• Move
• Move
• Move
• Back
• Scan
Down arrows mean press the OH+ or OH- buttons. Pressing the OH+ or OH- buttons
vertically in a main menu screen
through a submenu screen
to the next letter', number, or other choice in a submenu
up to correct an error
through TV channels (when not in a menu screen)
_11_- Left and right arrows mean press the VOLUME+or VOLUME-buttons to move left or right to:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
I_
The "Press Button" icon means you should press the button named on your remote control.
(Button names appear in SMALL CAPITALLETTERS.)
[_
The "Helping Hand" icon points to the highlighted
PLUGIN MENU
[_
r_]=l_.,"
LANGUAGE ENG FRE SPA
AUTOTUNERSETUP
SETCLOCK
FINISH
SELECT
BY I'ZlI_'I
OPERATE BY [][]
The Onscreen
or selected item in a menu.
EXIT BY_
Menus
To bring up the onscreen menu, press the MENU button on the remote control. The item that
appears in yellow is the one currently selected. If you press the MENU button again, the onscreen
display will skip to the next menu screen. If you use the Menu button on the TV's front panel instead of the
remote, an additional menu screen showing the channel number and input will appear:
The "Plug In Menu" will appear the first time the TV is plugged in.
Note: Menus shown in this guide are illustrations,
displays.
not exact replications
of the television's onscreen
21
Plug In Menu
Introduction
The Plug In Menu comes up automatically when you first turn on the TV after plugging it in. The
Plug In Menu helps you to get your TV ready to use by letting you set your preferences for:
• The Language in which you want the onscreen menus to appear,
• The Auto Tuner Setup of which channels you wish to receive,
• Setting the TV's clock to the correct time so your timer functions will work properly.
Descriptions of each of the Plug In Menu features appear on this page and the next. We recommend
you complete the Plug In Menu setup first so your TV is set up just the way you want, dght away.
Language
You can choose to view your" onscreen menus in three languages: English, French, or Spanish.
(_
Press the MENUbutton
AY
To LANGUAGE
4 _
To choose a language
_1_ ENGLISH_
FRENCH _SPANISH
4
P
4_
• You will not need to press the MENU button to enter this screen from the Plug In Menu.
Auto Tuner Setup
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active
ones and skipping over blank ones or channels with weak signals. This means when you scan (using
the CHANNEL+/- buttons) you will receive only clear, active channels.
(_
Press the MENUbutton
AV
To AUTO TUNER SETUP
4 I_
To operate
4 I_
To choose CABLE or AIR
AV
To move to START
4 I_
To start Auto Tuner Setup
.0w
I
PROGRAMMING
!
Programming
will take approximately
minutes,
I
1 to 2
PROGRAMMING
OVER!
I
• Noise Muting will not work during Auto Tuner" Setup.
• You will not need to press the MENUbutton to enter" this screen from the Plug In Menu.
22
Plug In Menu
Auto Clock Set
Before you use any of your TV's timer functions, you must first set the clock. You may precisely set
your clock using the XDS time signal broadcast by most Public Broadcasting stations. To set the
clock using the XDS signal:
I_
Enter the channel number of your local PBS station
I_)
Press MENU
_'V
TOSET CLOCK
• I_
TOoperate
• _"
To AUTO
MODE
AUTO
TIME ZONE
DST.
MANUAL
EASTERN
ON
OFF
FINISH
_,V
To TIME ZONE
• I_
To select your time zone
_,V
To move to Daylight Savings Time (D.S.T.)
• _-
To turn D.S.T. ON or OFF
_,V
To FINISH
• I_
To save settings and exit
• If you do not have a PBS station in your local area, you will have to set the clock manually. See
'Manual Clock Set' on the next page for instructions.
• The Daylight Savings Time feature automatically adjusts your TV's clock for Daylight Savings. The
clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will move back
one hour at 2:00 am on the last Sunday in October.
• You will not need to press the MENUbutton to enter this screen from the Plug In Menu.
23
Plug In Menu
Manual Clock Set
To set your clock manually (without using the XDS signal), choose MANUAL from the Set Clock
menu and follow the steps below.
AV
To SET CLOCK
4 •
To operate
4 •
To MANUAL
MODE
AUTO
MANUAL
STARTCLOCK
&V
To move to the hour
4 •
To set the hour
,*,'9'
To move to minutes
4 •
To set the minutes
,I,V
To move to START CLOCK
4 •
To start clock and exit
THANK YOU
• You wili not need to press the MENU button to enter this screen from the Plug In Menu.
Finish
Once you have the items in the Plug In Menu set to your personal preferences,
option to save your settings.
,I,V
To FINISH
4 •
To save settings and exit the Plug In Menu
• You can change the preferences
onscreen menu system.
move to the Finish
you set in the Plug In Menu at any time using the regular JVC
NOTES:
You will have to reset the clock after a power interruption. You must set the clock before operating
any timer functions.
24
Channel Summary
Channel
Summary
Channel Summary allows you to customize the line-up of channels received by your TV. You can
add or delete channels from the line-up or prevent any unauthorized viewers from watching any or
all 181 channels.
5)
Press the MENUbutton
,I,V
To CHANNEL
• I_
To operate
SUMMARY
2_HNO.SCAN
I_1
02
CHNO. SCAN
O7
""
03
,z
08
04
,z
09
05
O6
_/
10
""
11
'/
I_1
The Channel Summary screen (below) will now be displayed with the channels set to scan marked
with an "'/". You can delete channels from the scan by removing the "-/". If any channels were
missed during Auto Tuner Setup and you wish to add them, you may by placing an "-/" next to the
channel numbeE
,I,V
To the SCAN column
• I_
To include or delete from scan
I_
EXITwhen finished
You can block access to a channel by activating the Channel Lock,
,I,V
To C_NNEL
,I,V
To operate
To the Lock Column
5)
5)
Channel
SUMMARY
ZEROto lock or unlock that channel
Exff when finished
Guard Message
When a viewer attempts to watch a guarded channel, the following
THIS CHANNELIS LOCKEDBy
CHANNELGUARD.
I PLEASEENTERLOCKCODEBy
[ !0 KEYPAD!0 UONL-O!KI-]': 1
I
message appears:
To watch a channel that you have locked,
enter the Lock Code using the 10 key pad.
If the wrong code is entered, the message
"INVALID LOCK CODEF will flash on the
screen:
The channel cannot be accessed
correct code is entered.
until the
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also "Set Lock Code", page 33.
25
V-Chip
Your TV is equipped with V-Chip technology which enables TV Parental Guidelines (for United
States and Canada) and Movie (MPAA) Guideline controls. V-Chip technology allows you to program your TV to receive, or not to receive, programs based on content according to the guidelines.
Programs which exceed the ratings limits you set will be blocked. When a viewer attempts to watch
a blocked channel, this message appears:
YOUR
RAIING
LIMITS.
PLEASE
ENTER
LOCK
CODE
BY
I
I
THIS
PROG MiNG
EXCEEDS
I
10 KEY PAD TO UNLOCK I.
N0.-111
The channel wilI remain blocked until the correct lock code is entered (see page 33 for information
on setting your lock code).
You can customize the V-Chip settings of your television to match your personal tastes. The V-Chip
menu below is the starting point for your V-Chip settings
V-CHIP
ON OFF
SETUS TV RAIlNGS
SETMOVIERATINGS
SETCANADIANRATINGSENG
SETCANADIANRATINGSFRE
UNRATED VIEW BLOCK
FINISH
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use any or ali of
the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting each of the three VChip formats appear in the next seven pages along with descriptions of the rating categories.
To access the rating categories:
(_
Press the MENU button
i,V
To V-CHIP
• I_
To operate (Lock icon I_1will appear)
Press ZERO to access the V-Chip menu
I
• I_
To turn V-Chip ON or OFF (V-Chip must be turned ON for rating settings to operate)
,i,V
To move to SET US TV RATINGS, SET MOVIE RATINGS, or SET CANADIAN RATINGS
(see following pages for descriptions of each item)
Some programs are not broadcast with a ratings signal. Therefore, even if you setup V-Chip
ratings limits these programs will not be blocked. Parents are cautioned to preview the contents
Spe_ia!No!eab°utRating
s
of these programs or mov es.
26
V-Chip
US V-Chip Ratings
U.S. PARENTAL
Programs
with
RATING
SYSTEMS
the following
ratings
are appropriate
for children.
TVY is Appropriate for All Children.
Programs are created for very young viewers and should be suitabte for" all ages, including
children ages 2 - 6.
TVY7 is for Older Children.
Most parents would find such programs suitable for children 7 and above. These programs may
contain some mild fantasy violence or comedic violence, which children should be able to discern
from reality.
Programs with the following ratings
I"1 TV G stands for General Audience,
are designed
for the entire
audience.
Most parents would find these programs suitable for atl age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
TV PG Parental
Guidance
Suggested.
May contain some, but not much, strong language, limited violence, and some suggestive sexual
dialog or situations. It is recommended that parents watch these programs first, or with their
children.
TV 14 Parents Strongly Cautioned.
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense vioIence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
TV MA Mature Audiences Only.
These programs are specifically for adults and may be unsuitable for anyone under 17 years of
age. TV MA programs may have extensive V, S, L, or D.
Viewing
Guidelines
In addition to the ratings categories explained above, information on specific kinds of content are also
supplied with the V-Chip rating. These types of content may also be blocked. The content types are:
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
27
V-Chip
Setting
US V-Chip Ratings
(_
Press the MENU button
AV
To V-CHIP
To operate (Lock icon I[]1will appear)
Press ZERO to access the V-Chip menu
V-CHIP
ON
OFF
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED
VIEW
BLOCK
FINISH
• _-
To turn V-Chip ON or OFF
AV
To move to SET US TV RATINGS
• I_
To operate
Directions
to set
US
V-Chip Ratings:
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and press the
• or • to move the cursor to the correct location. Press •
item is locked if the 1_1icon appears instead of a ....
or I1_to turn the locking feature on or off. An
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that column
and add a lock icon. Once you've put a lock on the top row, everything in that column is
automatically locked.
• •
To the TV 14 Column
• _-
To turn on the lock
v
• •
To FINISH
• _
To save settings and exit
• If you want to change the setup, move the cursor to the top column and change the lock icon to
"--" by pressing • or _- again. You may then select individual categories to block.
28
V-Chip
Setting
ratings with the V-Chip button
To access Rating information about a certain program, press the V-CHIP button while viewing that
program. A display Iike this will appear:
PROGRAM IS RATED
:
TV-PG
!V
If you decide you want to block this category of viewing, press "0" while the above screen is
visible, and all programs from that category will be blocked.
Example
1:
If you want to set your V-Chip settings to block all pr'ogramming
above TV PG:
Press ZERO when TV-PG is displayed
All Programming
Example
above TV PG will be blocked.
2:
If you want to set your V-Chip settings to b!ock all programming
TV PG-V (with violence):
[_
Press ZERO when TV-PG
All Programming
above a current setting such as
V is displayed
above TV PG - V (with Violence) will be blocked.
• For Children's programming you can block TV-Y and Y7 programs by Pressing "0" when Y is
displayed during a program. Programming for audiences other than children's audiences will not be
affected.
29
V-Chip
Movie Ratings
NR - Not Rated.
This is a film which has no rating, in many cases these films were imported from countries which do
not use the MPAA ratings system. Other NR films may be from amateur producers who didn't intend to
have their film widely released.
NR (Not Rated) Programming may contain aft types of programming
programming, foreign programs, or adult material.
including
children's
G - General Audience.
in the opinion of the review board, these films contain nothing in the way of sexual content,
vioIence, or language that would be unsuitable for audiences of any age.
PG - Parental Guidance.
Parental Guidance means the movie may contain some contents such as mild violence, some brief
nudity, and strong language. The contents are not deemed intense.
PG-13 - Parents Strongly Cautioned.
Parents with children under 13 are cautioned that the content of movies with this rating may
include more expiicit sexuaI, Ianguage, and violence content than movies rated PG.
R - Restricted.
These films contain material that is explicit in nature and is not recommended
children under the age of 17.
NC-17 - No One Under 17.
for unsupervised
These movies contain content which most parents would feel is too adult for their children to view.
Content can consist of strong Ianguage, nudity, violence, and suggestive or explicit subject matter.
X - No One under 18.
inappropriate
Directions
to
material for anyone under 18.
set
Movie
(MPAA) Ratings:
I_
Press the MENU button
,I,V
To V-CHIP
• I_
To operate (Lock icon I_1 appears)
Press ZERO to access V-Chip setup options
,I,V
TOSET MOVIE RATINGS
• I_
TOenter movies menu
For example,
to block viewing of X and NC-17 rated from shows:
J,V
To the X Column
• I_
To turn on the lock
AV
To the NC-17 Column
• I_
To turn on the lock
,l,V
To FINISH
• I_
To save settings and exit
30
V-Chip
Canadian
0
V-Chip Ratings
E - Exempt.
Exempt programming includes: news, sports, documentaries and other information programming, talk
shows, music videos, and vadety programming.
O C - Programming
Intended
for Children.
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
C8+ - Programming
Intended for Children 8 and Over.
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low intensity and
will show the consequences of the acts. There will be no offensive language, nudity or sexual content.
G - General Audience.
Programming will contain little violence and wilI be sensitive to themes which could affect
younger children.
PG - Parental Guidance.
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropnate for children aged 8-13.
14+ - 14Years and Older.
Parents are strongly cautioned to exercise discretion in permitting viewing by preteens and early
teens. Programming may contain mature themes and scenes of intense violence.
18+ - Adult.
Material intended for mature audiences
only.
Directions to set Canadian V-Chip Ratings:
(_
Press the MENU button
,IV
To V-CHIP
• I_
To operate (Lock icon I[]1 appears)
(_
Press ZERO to access V-Chip setup options
_I,V
To SET CANADIAN
• I_
To enter ratings menu
RATINGS ENG (for English)
For example, to block viewing of programming
,IV
To the 18+ Column
• I_
To turn on the lock
,LV
To the 14+ Column
• _
To turn on the lock
,I,V
To FINISH
• I_
To save settings and exit
rated 14+ and 18+ :
• For instructions on "Set Canadian Ratings FRE (in French)", please see page 31 in the French side of
this user's guide.
31
V-Chip
Unrated
Notes
Programs
About
Unrated
Programs:
Unrated programming refers to any programming which does not contain a rating signal
Programming on television stations which do not broadcast rating signals will be placed in the
"Unrated Programming" category
Examples of Unrated programs:
Emergency Bulletins
Locally Originated Programming
News
Political Programs
Public Service Announcements
Religious Programs
Sports
Weather
Some Commercials
• TV programs or movies that do not have rating signals will be b!ocked if the Unrated Category is
set to BLOCK
Directions
to Block
Unrated
Programs:
Youcan block programs that are not rated
I_
Press the MENU button
_,V
To V-CHIP
• I_
To operate (The lock icon I_1 appears)
Press ZERO to access V-Chip setup options
_,V
To UNRATED
IUNITE0 BL0o
]
• 1_
To VIEW or BLOCK
(_)
Press ExF when done
32
V-Chip
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set
with a Lock Code of "O0O0". You may change the code to any four-digit number you wish. To
change the Lock Code, follow the steps below.
(_)
Press the MENUbutton
_,V
To SET LOCK CODE
• I_
To operate
The lock Icon LI_ appears
I_)
Press ZERO to access the Lock Code
LOCK C0DE
_000
HN,sH
I
The first diq/t will be hlgh//qhlod
• I_
To select the number
&V
To move to the next digit
Continue to follow these directions
_,V
To FINISH
• I_
To save settings and exit
Your Lock Code/s
lot all tour numbers
now set
NOTES:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
33
Picture
Settings
Tint
Tint allows you to adjust the levels of red and green in your TV picture.
(_)
Press the MENUbutton
,I,V
To TINT
I_
•
To increase the levels of green
To increase the levels of red
_ll,V
To move to the next setting
Color
The color function lets you make all the colors in the TV picture appear either more vivid or subtle.
Press the MENUbutton
_ll,
V
To COLOR
I_
To make the colors more vivid
•
To make the colors more subdued
_ll,V
To move to the next setting
Picture
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker or
brighter picture overall.
Press the MENUbutton
,I,V
To PICTURE
I_
To increase the level of contrast
•
To decrease
_ll,V
the level of contrast
To move to the next setting
Bright
You can adjust the overall brightness of the TV pic[ure with the Bright control.
(_)
Press the MENUbutton
_ll,V
To BRIGHT
I_
To lighten the picture
•
To darken the picture
_ll,V
To move to the next setting
Detail
The Detail feature adjusts the level of fine detail displayed
(_
Press the MENUbutton
,I,V
To DETAIL
I_
To make the picture sharper (more detail)
•
To make the picture smoother (less detail)
_ll,V
34
To move to the next setting
in the picture.
Picture Settings
Noise Muting
This feature inserts a blank blue screen over channels which are not broadcasting
to be received deady.
(_
Press the MENUbutton
,I,V
To NOISE MUTING
• •
To turn Noise Muting ON or OFF
or" are too weak
• Noise Muting will not work during Auto Tuner Setup or when you operate Channel Summary.
Set Video Status
With Set Video Status, you can save your own set of picture quality adjustments
have access to them at the touch of a button.
as "Choice" and
Press the MENUbutton
AV
To SET VIDEO STATUS
To operate
TINT
----:_-:
cOLOR
PICTURE
BRIGHT
- _:_::::._
DEIAIL
SAVE AS CHOICE
• •
To set the TINT levels
_ll,V
To move to the next option
Repeat these steps until all levels are set.
,I,V
To SAVE AS CHOICE
• •
To save settings and exit
• You must use SAVE AS CHOICE to exit the Set Video Status menu, otherwise
will not be saved.
your" preferences
• You can access your "Choice" settings at any time by pressing the VIDEO STATUSbutton on the
remote control.
NOTES:
The setting screen will disappear if you do not make any adjustments or move to the next setting in
approximately three seconds. Any changes you have made to picture settings up to that point will
be stored. You can exit the Picture Settings menu at any time by pressing the EXIT button on the
remote control.
35
Sound Settings
Bass
You can increase or decrease the level of Iow-frequency sound in the TV's audio with the Bass adjustment.
(_
Press the MENUbutton
A_'
To BASS
•
To increase the bass
4
To decrease the bass
AY
To move to the next setting
Treble
Use Treble to adjust the level of high-frequency sound in your TV's audio.
(_
Press the MENUbutton
AV
To TREBLE
•
To increase the treble
4
To decrease the treble
AV
To move to the next setting
Balance
Adjust the level of sound between the TV's two speakers with the Balance setting.
(_
Press the MENUbutton
A_'
To BALANCE
•
To shift the balance towards the right speaker
4
To shift the balance towards the Ieft speaker
AV
To move to the next setting
MTS (Multi-Channel
Television
Sound)
MTS technology allows several audio signals to be broadcast at once, giving you a choice in what
you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may
also include a Second Audio Program (SAP).
(_
Press the MENUbutton
AY
To MTS
4 •
Select the mode
(The ON AIR arrow tells you if a broadcast is in Stereo and/or contains an SAP).
• Keep the TV in STEREO mode to get the best sound quality. The sound will work in STEREO
mode even if a certain broadcast is in MONO sound only.
• Choose the MONO setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
NOTE:
You can leave the Sound Settings menu at any time by pressing the EXITbutton on the remote control.
36
General Items
On/Off Timer
The On/Oft timer lets you program your television to turn itself on or oft. You can use it as an alarm
to wake up, to help you remember important programs, or as a decoy when you're not home.
Press the MENUbutton
,LV
To ON/OFF TIMER
• _
To operate (begins with ON TIME)
• I_
To set the hour (AM/PM) you want the TV to turn on
•
• I_
To move to minutes
To set the minutes
•
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TiME the same way as ON TIME
•
To accept OFF TIME and move to CHANNEL
• I_
•
• I_
•
• I_
•
• I_
To select channel
To move to MODE
Choose ONCE or EVERYDAY
To ON/OFF TIMER
Choose YES to accept the timer setting, choose NO if you don't wish to accept
To FINISH
To save settings
On/OffTimer
Note for PIP (AV-27260, AV-32260 and AV-36260 only).
If the television is on when a timed event is about to start a Timer Preview window will appear. The
Timer Preview window wilI appear in the lower right corner of the screen seven seconds before the
timer is programmed to begin. When the timer activates, the Preview picture will become the main
picture.
NOTES:
• The On/Oft time cannot be set to locked or guarded channels.
• In order for the On/Oft timer to work, the clock must be set.
• After a power interruption, the Timer settings must be reset.
37
General Items
TV Speaker
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the audio
through your stereo.
I_
Press the MENUbutton
,LV
To TV SPEAKER
• I_
To turn the TV's speakers ON or OFF
I_
EXITwhen finished
• Before you turn the TV Speaker setfing from OFF to ON, make sure that the "rv volume level is low!
If the TV volume is set too high, the sound level will be extremely loud.
• After a power interruption, the TV Speaker settings will return to "ON".
NOTE:
• External
Speakers:
When using external speakers or amplifiers,
(see 'TV Speaker') above.
38
shut off the TV Speakers
General
Closed
Items
Caption
Many broadcasts now include an onscreen display of dialog called Closed Captions. Some broadcasts may also include displays of additional information in text form. Your television can access and
display this information using the Closed Caption feature. To activate the Closed Caption feature,
follow the steps below.
Press the MENUbutton
_,V
To CLOSED
• I_
To operate
MODE
CAPTION
:
CAPTION
CAPTION
:
CC1
0C2
0C3
0C4
TEXT
:
T1
T2
T3
T4
FINISH
• I_
To select CAPTION (for Closed Captions), TEXT (for text display), or OFF (for no display)
_,V
To move to CAPTION or TEXT
• _-
To select a caption (CC1 to CC4) or text channel (T1 to T4)
AV
To accept that selection and move to FINISH
• I_
To save settings and exit
NOTES:
• Closed Caption subtitles are usually found on closed caption channel CC1. Some programs may
include additional text information which is usually found on text channel Tf. The other channels
are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are playing
a video tape.
• Most broadcasts containing Closed Captioning will display a notice at the start of the program.
39
Button Functions
Menu
The MENUbutton allows you to access JVC's onscreen menu system. Press MENUto activate the
onscreen menu system.
• See individual topics (like "Sound Settings") for specific information on using menus.
Exit and PIP Off
Press the EXIT button to leave a menu screen. On the RM-C305
OFF". Press ExF/PIP OFF to turn off the Picture-in-Picture
information on the PIP feature).
• PIP is available
this button is also labeled "PIP
function (please see page 44 for more
only on the AV-27260, AV-32260 and AV-36260.
Display
The Display screen shows the current status of timers and inputs.
(_
Press the DISPLAYbutton
NOW
SLEEPTIMER
ON/OFFTIMER
ON TIME
0FF11ME
12:20 PM
OFF
EVERYDAY
7:00 PM
10:00PM
The screen above shows the following information:
• The current channel or AV input (Channel 07)
• The current time (12:20 pro)
• Sleep Timer status/minutes
remaining (The Sleep Timer is off)
• On/Off Timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)
• Each Press of the DISPLAYbutton changes the display mode:
]_
Display
Time
Time _
Channel _
Off
Full screen shown above
Shows the current time only
Channel
Off
Display _
Shows the current channel
Turns Display off
• You may also turn off the Display at any step by pressing EXIT.
NOTE:
• Please note that if the Clock, Sleep Timer" or On/Off Timer are not set, the Display screen will
show: "Clock Not Set", "Sleep Timer Off", and "On/Off Timer Off" respectively.
40
Button Functions
Video Status
The VIDEOSTATUSbutton gives you a choice of three TV picture display settings, including a
display of your own preferences.
Standard
Resets the picture display to the factory settings.
Choice
Displays the setting levels you specified on the "Set Video Status" Menu (see page 35).
Theater
Gives a rich, film-like look to video.
(_
Press the VIDEO STATUSbutton
_.CHOICE_THEATER_STANDARD_
1
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals of
15 minutes, for a total time of up to 180 minutes.
Press the SLEEPTIMERbutton
_1_ 0 15 30 45 60 75 90 105 120 135 150 165 180
Sleep Timer Message
20 seconds before the automatic shutoff, this message will appear:
Push
T,MER
BUT"0,
GOOD NIGHTH
I
TO EXTEND
You thenhave 20 secondstopresstheSleep_mer buttontodelaytheshutoff
foranother15 minutes.
Hyper Surround
Creates a deep, three-dimensional
sound effect by channeling the audio through the TV's front-firing
speakers. Press the HYPER SURROUNDbutton to turn the effect on or off.
IHYPERSURROUND
ON
Muting
The MUTINGbutton instantly turns the volume down completely when you press it. Press MUTINGand the
volume level will instantly go to zero. To restore the volume to its previous level, press MUTINGagain.
41
Button Functions
100+ Button
Use the 100+ button to directly access channels above Channel 99. For example to move to channel 124,
press100+, then 2 (two), then 4 (four).
Return+
The RETURN+ button has two functions:
Return
Returns to the channel viewed just before the channel currently onscreen.
Return+
Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH- buttons.
(_
RETURN+and hold for three seconds
RETURNCHANNEL
PROGRAMMED
!
The channel currently active has been programmed as your Return+ channel. Now scan through
the channels using the CHANNEL+/-buttons
(_
RETURN+
You will return to your programmed
channel.
• To cancel your Return+ channel, press and hold the RETURN+button for three seconds. The message
"RETURN CHANNEL CANCELLED!" will appear:
• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel Return+.
• Return+ does not affect the PIP channel (AV-27260, AV-32200 and AV-36260 only).
Input
Selects the signal input source for the television: TV, for Antenna or Cable; Video 1, 2 or" 3, for" video
devices like VCRs, DVD players, or camcorders.
INPUT
[_
42
TV -----_VlDEO-1 -----_ VIDEO-2 ----_Vl DEO-3 _]
Button Functions
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV/VCR, power on, and
power off.
Move the selector switch to VCR to operate.
• The remote is preset with the code 000 to control JVC-brand VCR's. For any other manufacturer's
brand VCR, please see the code chart and instructions on page 19.
DVD Buttons
You can also use this remote control to operate the basic functions of your DVD player. These
functions include: play, rewind, fast-forward, stop, still/pause, previous/next, tray open/close, power
on, and power off.
Move the selector switch to DVD to operate.
• The remote is preset with the code 000 to control JVC-brand DVD players. For any other
manufacturer's brand DVD player, please see the code chart and instructions on page 20.
TV/CATV
Switch
Use either the television's own tuner or a cable box to select channels. Set this switch to TV to operate
the television's built-in tuner. Move the switch to CATV to operate a cable box.
• See page 18 for information on programming your remote for cable box operation.
VCR/DVD
Switch
You can control a VCR or DVD player with the buttons on the lower part of the remote control. Use the
VCR/DVD selector switch to choose either VCR or DVD operation.
• See pages 19 and 20 for information on programming your remote with VCR and DVD operating
codes.
43
Button Functions
- PIP
PIP displays two separate pictures on screen. Your television has 2-Tuner PIP, meaning you can
view pictures from two different channels simultaneously. A special set of PIP control buttons are
located on the upper part of the remote control. Descriptions of each button appear on this page.
The PIP feature is available on modes AV-27260, AV-32260 and AV-36260 only.
Cable Box Note
The 2-Tuner PIP function may not operate when used with certain cable boxes. This is because while
some models of cable boxes may receive up to 181 channeis, they may only send the signal from one
channel to your television (please also see diagram on page 11). For the PIP tuner to operate correctly, it
must have access to all available channels. Since the television is receiving the signal of only one channel
from the cable box, it is impossible for the 2-Tuner PIP to display a second, different channel.
Because there are many different models of cable boxes in use today, if you are having problems
operating your PIP feature with your cable box, we recommend you contact your local cable
company for connection advice.
On/Move
Turn PIP on by pressing the ON/MOVE button.
(_
(PIP) ON/MOVE
O7
O2
I_
EXIT/PIP OFF to turn PIP off
Once PIP is turned on, you can move the PIP window to any of the TV's main picture's four corners
with the ON/MOVE button.
I_
ON/MOVE
• Each press of ON/MOVE will shift the PIP window to a different corner.
44
Button Functions
- PIP
Freeze
Use the FREEZEbutton to lock a single, still image onto the PIP window.
• If PIP is off when FREEZEis pressed, a snapshot of the main screen is taken and placed in the
PIP window.
• If PIP is on when FREEZEis pressed, the image in the window when the button was pressed is held.
Swap
You can exchange the channel displayed on the main screen for the one shown in the PIP window
by pressing SWAP.
Channel
+/- for PIP
Like the main CHANNEL+/- buttons, CHANNEL+/- for PIP lets you scan through the channels in the
PIP window.
• Direct channel selection with the 10 key pad for PIP is not possible.
Source
You can select the signal source for the PIP window image.
_I_TV
_V-1
_V-2
_
V-3 _']
• If the PIP does not have a signal, the window will be blue.
• If you connect a DVD to Video-2 the PIP window will be blue.
NOTES:
• The PIP window is I/9 the size of the full screen.
• PIP will not display blocked channels or programs. A blue screen will display instead.
45
Troubleshooting
"iil_¶
|-i771-1r
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture
or sound
•
•
•
•
The
The
The
The
Remote control is not
operating properly or
at all
•
•
•
•
Check to see that the batteries are still working and properly installed.
Make sure the remote has a clear sight path to the TV.
Check that the TV/CATV switch is in the proper position.
You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
certain channel
• Make sure the channels have been programmed. See "Channel Summary", page 25.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 25.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 37.
• Check to see if the Sleep Timer was set. See page 41.
The clock is wrong
• The power was interrupted
The On Timer is
blinking
• There is a problem with the TM Unplug the set and call for service.
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 34.
• The Video Status mode may be turned to the wrong setting. See page 35.
There are lines
across the picture
• There could be interference from another electdcal appliance, such as a computer,
another TV or VCR. Move any such appJiances further away from the TM
The picture is spotted
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
There are douMe
pictures (ghosts)
• A building or passing airplane can reflect the obginal signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
Screen is 80% black
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 39.
Stereo or bilingual
programs can't be
heard
• Make sure the MTS settings are correc'h See "MTS" on page 36.
There is no sound
from the TV's speake_
• The TV Speaker option may be turned off. See page 38.
Static electricity
• It is normat to feet static electricity if you brush or touch the screen.
You hear occasional
crackling sounds
• It is normat for the TV to make crackling sounds when first turned on or off. Unless
the sound or picture become abnormal, this is fine.
46
antenna could be disconnected.
input mode could be set improperly. See page 42.
tuner (Auto Tuner Setup) could be set improperly. See page 22.
TV station may be having difficulties. Check to see if other stations are working.
and the clock was not reset. See page 23.
Warranty
For Canadian mode! televisions, see separate sheets for Canadian warranty
information.
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below
ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS
AND WORKMANSHIP
from the date of original retail purchase for the period shown below (the
"Warranty Period") (PICTURE TUBE is covered for Two (2) years.)
I
Parts
1YEAR
Labor
1 YEAR I
THIS LIMITED WARRANTY IS VALID ONLY INTHE FIFTY (50) UNITED STATES, THE DISTRICT
OF COLUMBIA AND COMMONWEALTH
OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective within the warranty period, JVC will repair or replace
defective parts at no charge to the original owner. Such repair and replacement
services
shall be rendered by JVC during regular business hours at JVC authorized service centers.
Parts used for replacement are warranted only for the remainder of this Warranty Period. All
_roducts and parts thereof may be brought to a JVC authorized service center on a carry-in
basis. Televisions with a screen size of 25 inches and larger may be covered on an in-home basis
where such service is available.
WHATYOU
MUST DO FORWARRANTY
SERVICE:
To determine if in-home service is available in your area, either contact the selling dealer (retailer)
or call 1-800-537-5722 to locate the nearest JVC authorized service center. Service locations can
also be obtained from our website http://www.!vcservice.com.
In-home service, if available, will
require clear access to the Television by the service representatives. If in-home service is not avaiiable, carry in service will be provided.
If service is not locally available, box the product carefully, preferably in its original carton,
and ship, insured, with a copy of your bill of sale plus a letter of explanation
of the problem
to the nearest JVC Factory Service Center, the name and location which will be given to you
by the toll free number.
If you have any questions
Relations Department.
concerning
your JVC Product,
please
contact
our Customer
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1) Products which have been subject to abuse, accident, alteration, modification,
tampering,
negligence, misuse, faulty installation,
lack of reasonable care, or if repaired or serviced
by anyone other than a service facility authorized by JVC to render such service, or if
affixed to any attachment not provided with the products, or if the model or serial number
has been altered, tampered with, defaced or removed;
2) Initial installation,
installation and removal from "built-in" entertainment
centers and other
mounting systems;
3) Operational
adjustments
covered in the Owner's Manual, normal maintenance,
video and
audio head cleaning;
4) Damage that occurs in shipment, due to an act of God, and cosmetic damage;
5) Signal reception problems and failures due to line power surge;
6) Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days
from the date of purchase;
47
Warranty
7) Accessories;
8) Batteries (except that Rechargeable
chase.)
Batteries
are covered for 90 days from date of pur-
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILTY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE,
OR ANY OTHER DAMAGES,WHETHER
DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD
SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long the warranty lasts, so these exclusions or limitations may not apply to
you.This warranty gives you specific legal rights and you may also have other rights which
vary state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, New Jersey 07470
http://www.jvcservice.com
REFURBISHED
PRODUCTS
CARRY
A SEPARATE
WARRANTY.
THIS WARRANTY
DOES
NOT APPLY FOR DETAILS OF REFURBISHED
PRODUCT WARRANTY.
PLEASE REFER
TO THE REFURBISHED
PRODUCT WARRANTY
INFORMATION
PACKAGED WITH EACH
REFURBISHED
PRODUCT.
For customer use:
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side
of the cabinet.
Retain this information
for future reference.
Model No.:
Purchase Date:
48
Serial No.:
Name Of Dealer:
Authorized
Service
Centers
OOAL,T
JV " sERv,cE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
http://www.jvc,com
Dear Customer,
In order to receive the most satisfaction from your purchase, please read the
instruction booklet before operating the unit, In the event that repairs are necessary,
or for the address nearest your location within the Continental United States, please
call 1 (800) 537-5722 for your nearest authorized servicer or visit our website at
www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock, do not open the cabinet. There are no user serviceable parts
inside. Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product, you may contact your local JVC Dealer.
From the 48 Continental United States call toll free: 1 (800) 882-2345 or on the web at
www.JVC,com
For service
in Canada
To locate your local JVC service center or dealer in Canada please call:
In Eastern Canada:
1 (416) 293-1311
In Western Canada:
1 (604) 270-1311
En Fran_;ais(Montr6al):
1 (514) 871-1311
Or visit us on the web at www.JVC,ca
49
Search Codes
Cable/Satellite
Search
Codes Function:
1)
2)
3)
4)
Slide the first 2-Way Mode Selector switch to CATV.
Press the TV POWERand RETURN+ buttons. Hold for at least three seconds and release.
Press TV POWER,see if the CATV or Satellite box responds.
If there was a response, press RETURN+.The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use the
remote control which came with the equipment.
5) Press RETURN+ to exit.
VCR Search Codes
1)
2)
3)
4)
Function:
Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "VCR".
Press the VCR POWERand RETURN+buttons. Hold for at least three seconds and release.
Press VCR POWER,see if the VCR responds.
If there was a response, press RETURN+.The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times without a response, use the
manufacturers remote control which came with the VCR.
5) Press RETURN+ to exit.
DVD Player Search
1)
2)
3)
4)
Codes Function:
Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".
Press the DVD POWERand RETURN+buttons. Hold for at least three seconds and release.
Press DVD POWER,see if the DVD player responds.
If there was a response, press RETURN+.The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 30 times without a response, use the
manufacturers remote control which came with the DVD player.
5) Press RETURN+to exit.
50
Specifications
MODEL
AV-27260
AV-32230
ReceptionFormat
AV-32260
AV-36230
AV-36260
NTSC,BTSCSystem (Multi ChannelSound)
VHF
Reception Range
210
] 3, ONE
14 to 69
Sub Mid, Mid, Supel, Hyperand UIVa bands
(]8] channelfTequencysynthesizer system)
AC 120_ 60Hz
PowerSou_e
Power
123W
128W
133W
130W
133W
Consumption
Screen Size
27 inch / 68 cm
32 inch / 80 cm
36 #_ch/ 90 cm
measureddiagonally
fu, square
measureddiagonally
full square
measureddiagonally
fu, square
3W + 3W
Audio Output
2 x 4 3/4/5x12 cm
oval x 2
Speakers
Antenna Terminal
3 1/4 x 4 3/4/8x12 cm
oval x 2
75 ohms (VHF/UHF) (F type connector)
Extemallnput
Jacks
Video: 1 Vp p, 75 ohms
Audio: 50OnWrms (-4dBs) high impediance
S Videolnput
Jack
Y: 1Vp-p positive, 75 ohms (negatwesync plovided)
C: 0286 Vpp (burst signa0, 76 ohms
Comporlent Input
Jacks
Y: 1Vp-p positive, 75 ohms (negatwesync provided)
PdPR: 07 Vp_p,75 ohms
Audio Output
Jacks (VAR0
More [han0 [o 1560 mVrms (+6 dBs)
AV Compu Lklk
EX Jack
Dimensions(In)
WxHxD (cm)
Weight fibs/ks)
35 mm minijack x 1
253/4×233/6 x 201/2
654 ×591 ×518
30 1/4 x26 1/4 x 21 1/2
768 x 667 x 547
748/340
1122/51 0
Accessores
Specifications
33718x233/4x221/8
860 x603 x 560
14921678
Remote control unit x 1 / AAbatteries x 2
subject
to change
without
notice,
51
JVC COMPANY OF AMERICA
Division of JVC Americas Corp,
1700 Valley Road
Wayne, New Jersey, 07470
JVC
JVC CANADA, INC.
21 Finchdene Square
Scarborough,Ontario
Canada, MIX IA7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement