Datasheet for XGA & HDTV over Twisted Pair Branching - AV-iQ

Datasheet for XGA & HDTV over Twisted Pair Branching - AV-iQ
Kramer Electronics, Ltd.
USER MANUAL
Model:
TP-202
UXGA Line Transceiver / DA
Contents
Contents
1
2
2.1
3
3.1
3.2
3.3
3.4
4
5
5.1
6
Introduction
Getting Started
Quick Start
Overview
About the TP-202 UXGA Line Receiver / DA
About the Power Connect Feature
Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP)
Recommendations for Achieving the Best Performance
Your TP-202 UXGA Line Transceiver / DA
Connecting the TP-202
Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors
Technical Specifications
1
1
1
3
3
3
4
4
5
7
9
10
Figures
Figure 1: TP-202 UXGA Line Transceiver / DA
Figure 2: TP-202 (Underside Panel)
Figure 3: Connecting the TP-202
Figure 4: CAT 5 PINOUT
5
6
8
9
Tables
Table 1: TP-202 UXGA Line Transceiver / DA Features
Table 2: TP-202 (Underside Panel) Features
Table 3: CAT 5 PINOUT
Table 4: Technical Specifications of the TP-202
5
6
9
10
i
Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast
range of problems that confront the video, audio, presentation, and
broadcasting professional on a daily basis. In recent years, we have redesigned
and upgraded most of our line, making the best even better! Our 1,000-plus
different models now appear in 11 groups1 that are clearly defined by
function.
Congratulations on purchasing your Kramer TOOLS TP-202 UXGA Line
Transceiver / DA which is ideal for:
Presentation and multimedia applications
Long range graphics distribution for schools, hospitals, security, and
stores
The package includes the following:
TP-202 UXGA Line Transceiver / DA
Power adapter (12V DC Input)
This user manual2
2
Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Use Kramer high performance high resolution cables3
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems; GROUP 4:
Format/Standards Converters; GROUP 5: Twisted-Pair Solutions; GROUP 6: Specialty AV Products; GROUP 7: Scan
Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity; GROUP 10: Accessories and
Rack Adapters; GROUP 11: Sierra Products
2 Download up-to-date Kramer user manuals from the Internet at this URL: http://www.kramerelectronics.com
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com
1
Getting Started
2
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Overview
3
Overview
This section describes:
A summary of the TP-202, see section 3.1
The power connect feature, see section 3.2
Using shielded twisted pair (STP) / unshielded twisted pair (UTP), see
section 3.3
Recommendations for achieving the best performance, see section 3.4
3.1 About the TP-202 UXGA Line Receiver / DA
The Kramer TOOLS TP-202 receives a computer graphics1 signal which is
transmitted via CAT 5 cabling, and distributes it to two XGA outputs
simultaneously.
The TP-202 UXGA Line Transceiver / DA:
Has a transmission range of more than 300ft. (more than 100 meters)
Can receive HD signals (high definition resolutions: 480p, 576p, 720p,
1080i and 1080p)
Includes two XGA outputs on 15-pin HD connectors
Includes EQ. and LEVEL controls
Can change the polarity of decoding H and V Sync for UXGA graphics
Is 12VDC fed and can power or be powered by the receiver over the
same CAT 5 cable (see section 3.2)
Features a CAT 5 output for transmitting the signal to an additional
receiver
3.2 About the Power Connect Feature
The Power Connect feature lets you power a transmitter / receiver system by
connecting just one power adapter— to either the transmitter or the receiver.
The other unit is fed via the cable connecting between the transmitter/receiver.
The Power Connect feature applies as long as the cable can carry power. The
distance does not exceed 50 meters on standard CAT 5 cable, for longer
distances, heavy gauge cable should be used2.
For a CAT 5 cable exceeding a distance of 50 meters, separate power supplies
should be connected to the transmitter and to the receiver simultaneously.
1 The terminology XGA is used throughout this manual, where this implies any RGBHV signal on an HD15 connector
having a resolution from VGA up to exceeding UXGA
2 CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances
3
Overview
3.3 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP)
We recommend that you use shielded twisted pair (STP) cable. There are
different levels of STP cable available, and we advise you to use the best
quality STP cable that you can afford. Our STP skew-free cable: Kramer
BC-SXTP, is intended for transmitting VGA signals; our non-skew-free cable:
Kramer BC-STP, is intended for digital signals.
The compliance to electromagnetic interference was tested using STP cables,
therefore we recommend using those cables.
Although unshielded twisted pair (UTP) cable might be preferred for long
range applications, the UTP cable should be installed far away from electric
cables, motors and so on, which are prone to create electrical interference.
However, since the use of UTP cable might cause inconformity to electromagnetic
standards, Kramer does not commit to meeting the standard with UTP cable.
3.4 Recommendations for Achieving the Best Performance
To achieve the best performance:
Connect only good quality connection cables, thus avoiding
interference, deterioration in signal quality due to poor matching,
and elevated noise- levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your TP-202 away from moisture, excessive sunlight and dust
Caution – No operator-serviceable parts inside unit.
Warning – Use only the Kramer Electronics input power
wall adapter that is provided with this unit1.
Warning – Disconnect power and unplug unit from wall
before installing or removing device or servicing unit.
1 For example: model number AD2512C, part number 2535-000251
4
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-202 UXGA Line Transceiver / DA
4
Your TP-202 UXGA Line Transceiver / DA
Figure 1 and Table 1 define the TP-202:
Figure 1: TP-202 UXGA Line Transceiver / DA
Table 1: TP-202 UXGA Line Transceiver / DA Features
1
2
#
Feature
12V DC
LINE IN RJ-45 Connector
3
4
5
6
7
8
LINE OUT RJ-45 Connector
EQ. Trimmer
LEVEL Trimmer
XGA OUT 1 15-pin HD Connector
XGA OUT 2 15-pin HD Connector
ON LED
Function
+12V DC connector for powering the unit
Connect2 to the LINE OUT RJ-45 connector on the
transmitter1
Connect2 to the LINE IN connector on an additional TP-202
Adjust3 the cable compensation equalization level
Adjust3 the output signal level
Connect to the first XGA acceptor
Connect to the second XGA acceptor
Illuminates when receiving power
1 For example, the PT-110, as Figure 3 illustrates
2 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 4)
3 Insert a screwdriver into the small hole and carefully rotate it, to trim the appropriate level
5
Your TP-202 UXGA Line Transceiver / DA
Figure 2 and Table 2 define the TP-202 underside panel:
Figure 2: TP-202 (Underside Panel)
Table 2: TP-202 (Underside Panel) Features
1
#
Feature
VS Switch
2
HS Switch
Function
Slide the switch to NORMAL to retain the polarity1
Slide the switch to INVERT to invert the VS polarity
Slide the switch to NORMAL to retain the polarity1
Slide the switch to INVERT to invert the HS polarity
1 By default, both switches are set to NORMAL
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-202
5
Connecting the TP-202
You can use the TP-202 UXGA Line Transceiver / DA to configure a UXGA
DA system. This will let you transmit a computer graphics signal to two
displays via long line CAT 5 UTP cabling1.
To connect the TP-202, as the example in Figure 3 illustrates, do the following:
1. Connect a transmitter (for example, the Kramer PT-110 XGA Line
Transmitter2) to the LINE IN RJ-45 connector via CAT 5 cabling, see
section 5.1.
2. Set the VS and HS switches on the underside of the unit to NORMAL.
3. Connect the XGA OUT 1 15-pin HD connector to an XGA acceptor (for
example, Display 1).
4. Connect the XGA OUT 2 15-pin HD connector to an XGA acceptor (for
example, Display 2).
5. Check the image on the display. If it is not stable, set the VS and HS switches to
INVERT to obtain a stable image.
6. If required, connect the LINE OUT RJ-45 connector on the TP-202 to an
additional3 TP-202.
7. If required, adjust4 the video output signal level and/or cable compensation
equalization level.
8. If necessary, set the HS and VS switches on the TP-202 underside5.
9. Connect the 12V DC power adapter to the power socket and connect the adapter
to the mains electricity (not shown in Figure 3).
The signal from the UXGA source is transmitted via CAT 5 cable to the
TP-202, decoded and converted at the XGA OUT 1 and XGA OUT 2 15-pin
HD connectors to the UXGA acceptors simultaneously.
When chaining several units, it is recommended to use an STP cable between
the transmitter and the receiver and a skew free cable to connect between the
TP-202 units.
When using the TP-202 as a standalone, it is recommended to use UTP cables.
1 By using two TP-202 units, you can transmit the signal to an additional TP-202
2 You can also connect an HD transmitter, such as the Kramer TP-219HD
3 Up to six units may be connected with minimal deterioration. The combined length between the first and the last unit may
exceed 300 meters
4 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
5 By default, both switches are set to normal (see Figure 2 and Table 2)
7
Connecting the TP-202
Figure 3: Connecting the TP-202
8
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TP-202
5.1 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors
Table 3 and Figure 4 define the UTP CAT 5 PINOUT, using a straight pin-topin cable with RJ-45 connectors:
Figure 4: CAT 5 PINOUT
Table 3: CAT 5 PINOUT
EIA /TIA 568A
PIN
1
2
3
4
5
6
7
8
Wire Color
Green / White
Green
Orange / White
Blue
Blue / White
Orange
Brown / White
Brown
EIA /TIA 568B
PIN
1
2
3
4
5
6
7
8
Wire Color
Orange / White
Orange
Green / White
Blue
Blue / White
Green
Brown / White
Brown
Pair 1
4 and 5
Pair 1
Pair 2
3 and 6
Pair 2
4 and 5
1 and 2
Pair 3
Pair 4
1 and 2
7 and 8
Pair 3
Pair 4
3 and 6
7 and 8
9
Technical Specifications
6
Technical Specifications
Table 4 includes the technical specifications1.
Table 4: Technical Specifications2 of the TP-202
INPUTS:
1 CAT 5 LINE IN on an RJ-45 connector
OUTPUTS:
1 CAT 5 LINE OUT on an RJ-45 connector
2 XGA on 15-pin HD connectors
MAX. OUTPUT LEVEL:
1.5Vpp
RESOLUTION:
DIFF. GAIN:
Up to UXGA, up to 1080p
2.8%
DIFF. PHASE:
0.2°
K-FACTOR:
0.1%
S/N RATIO:
69.2dB @5MHz
CONTROLS:
Level: -9.6dB to +2.3dB; Equalization: 0dB to 36.3dB @50MHz
COUPLING:
Receiver section: DC, looping section: AC
POWER SOURCE:
12V, 525mA maximum current
3
DIMENSIONS:
12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95"), W, D, H
WEIGHT:
0.3kg (0.67lbs) approx.
ACCESSORIES:
Power supply
1 Specifications are subject to change without notice
2 Specifications are guaranteed for a system of two connected machines
3 When feeding TP-219HD (as the transmitter) and a looped TP-202
10
KRAMER: SIMPLE CREATIVE TECHNOLOGY
LIMITED WARRANTY
Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the
following terms.
HOW LONG IS THE WARRANTY
Labor and parts are warranted for seven years from the date of the first customer purchase.
WHO IS PROTECTED?
Only the first purchase customer may enforce this warranty.
WHAT IS COVERED AND WHAT IS NOT COVERED
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered
by the warranty:
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site
www.kramerelectronics.com.
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID
IF TAMPERED sticker has been torn, reattached, removed or otherwise interfered with.
3. Damage, deterioration or malfunction resulting from:
i) Accident, misuse, abuse, neglect, fire, water, lightning or other acts of nature
ii) Product modification, or failure to follow instructions supplied with the product
iii) Repair or attempted repair by anyone not authorized by Kramer
iv) Any shipment of the product (claims must be presented to the carrier)
v) Removal or installation of the product
vi) Any other cause, which does not relate to a product defect
vii) Cartons, equipment enclosures, cables or accessories used in conjunction with the product
WHAT WE WILL PAY FOR AND WHAT WE WILL NOT PAY FOR
We will pay labor and material expenses for covered items. We will not pay for the following:
1. Removal or installations charges.
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the
responsibility of the Kramer dealer from whom the product was purchased.
3. Shipping charges.
HOW YOU CAN GET WARRANTY SERVICE
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,
company, address, and a description of the problem(s).
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.
LIMITATION OF IMPLIED WARRANTIES
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to
the length of this warranty.
EXCLUSION OF DAMAGES
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall
not be liable for:
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss
of time, commercial loss; or:
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitations and exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.
NOTE: All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.
This equipment has been tested to determine compliance with the requirements of:
EN-50081:
EN-50082:
CFR-47:
"Electromagnetic compatibility (EMC);
generic emission standard.
Part 1: Residential, commercial and light industry"
"Electromagnetic compatibility (EMC) generic immunity standard.
Part 1: Residential, commercial and light industry environment".
FCC* Rules and Regulations:
Part 15: “Radio frequency devices
Subpart B Unintentional radiators”
CAUTION!
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the
equipment.
Use the supplied DC power supply to feed power to the machine.
Please use recommended interconnection cables to connect the machine to other components.
* FCC and CE approved using STP cable (for twisted pair products)
11
For the latest information on our products and a list of Kramer
distributors, visit our Web site: www.kramerelectronics.com,
where updates to this user manual may be found.
We welcome your questions, comments and feedback.
Safety Warning:
Disconnect the unit from the power supply before
opening/servicing.
Caution
Kramer Electronics, Ltd.
Web site: www.kramerelectronics.com
E-mail: [email protected]
P/N: 2900-000226 REV 3
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement