User Manual - Warehouse Sound Systems

User Manual - Warehouse Sound Systems
User Manual
151.230 LED PAR 64 18 x 10W Alu Quad IR DMX
www.beamzlighting.com
Downloaded from www.Manualslib.com manuals search engine
ENGLISH
Congratulations to the purchase of this Beamz light effect. Please read this manual thoroughly prior to using the unit in order to
benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all
precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to
avoid electrical shock. Keep the manual for future reference.
- Prior to using the unit, please ask advice from a specialist.
When the unit is switched on for the first time, some smell
may occur. This is normal and will disappear after a while.
- The unit contains voltage carrying parts. Therefore do NOT
open the housing.
- Do not place metal objects or pour liquids into the unit This
may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as radiators,
etc. Do not place the unit on a vibrating surface. Do not
cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always pull
the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they need to
be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal parts
are visible, do NOT plug the unit into a mains outlet and DO
NOT switch the unit on. Contact your dealer. Do NOT
connect the unit to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet
(220-240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule is:
Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the unit with an extra safety chain if the unit is ceiling
mount. Use a truss system with clamps. Make sure nobody
stands in the mounting area. Mount the effect at least 50cm
away from inflammable material and leave at least 1 meter
space on every side to ensure sufficient cooling.
- This unit contains high intensity LEDs. Do not look into the
LED light to prevent damage to your eyes.
- Do not repeatedly switch the fixture on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave the
unit unattended.
- Do not use cleaning sprays to clean switches. The residues
of these sprays cause deposits of dust and grease. In case
of malfunction, always seek advice from a specialist.
- Only operate the unit with clean hands.
- Do not force the controls.
- If the unit has fallen, always have it checked by a qualified
technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables prior to
moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains voltage
of the country is suitable for this unit.
- Keep the original packing material so that you can transport
the unit in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read
and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their
guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
www.beamzlighting.com
Downloaded from www.Manualslib.com manuals search engine
1. Safety Instruction
Please read the instruction carefully which including important
information about the installation, operation and maintenance.
■Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this
instruction booklet.
■ Unpack and check carefully there is no transportation damage before using the unit.
■ Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
■ It’s important to ground the yellow/green conductor to earth in order to avoid electric
shock.
■ The unit is for indoor use only and use only in a dry location.
■ The unit must be installed in a location with adequate ventilation, at least 50cm from
adjacent surfaces. Be sure that no ventilation slots are blocked.
■Disconnect mains power before fuse replacement or servicing.
■ Replace fuse only with the same type.
■ Make sure there are not flammable materials close to the unit while operating as it is fire hazard.
■Use safety cable when fixes this unit.
■ In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repair carried
out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center and
always use the same type spare parts.
■
Do not touch any wire during operation as high voltage might be causing electric shock.
2. Technical Specification
• It can be operated by DMX512 control or can be used as an individual unit without
controller.
• It can be linked together as many as required in master/slave mode, and perform the great
built-in programmed lighting shows triggered by music.
• Please use a 3 pin XLR cable/plug when connecting them together.
• Fan cooled.
Supply Voltage: AC110~240V 50/60HZ
Power: 180W
LED: 18×10W Quad LED RGBW
Fuse: 3A
Control Signal:DMX signal
Channel:7 Channels
Function: DMX, Master-Slave, Auto, Sound active, IR remote control.
Dimensions per unit: 220 X 220 X325mm
Weight (per unit): 3.2 kg
www.beamzlighting.com
Downloaded from www.Manualslib.com manuals search engine
3. Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and
slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a
weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit when installing
the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people and has no one
pass by or under it.
4. How To Control The Unit
Four ways to operation:
A. Master/Slave operation
B. Easy sound active and Auto mode
C. Universal DMX controller
D.IR remote control
Master/Slave operation
The unit can be linked together in daisy chain as many as you need in master/slave mode to perform the great built-in
pre-programmed lighting shows triggered by music.
In Master/Slave mode refer to the DMX settings below:
Master unit: when working at Auto or Sound Control mode operation
Slave units: DMX start address MUST be set to d001.
Menu for “IR 1” receive IR remote signal, Menu for “IR 0” stop receive IR remote signal.
LED digital display Menu function as below:
DMX code setting: d001~d512
CH1
0~255
Red
CH2
0~255
Green
CH3
0~255
Blue
CH4
0~255
White
CH5
11~255
LED Strobe(From slow to fast)
11~50
Auto1 DMX(Strobe)
51~100
Auto2 DMX(No Strobe)
101~150
Auto3 DMX (smooth changing color)
151~200
Sound1 DMX (Strobe)
CH6
www.beamzlighting.com
Downloaded from www.Manualslib.com manuals search engine
CH7
201~250
Sound2 DMX (No Strobe)
251~255
Sound3 DMX (smooth changing color)
0~255
Auto DMX/ Sound DMX Speed (Slow--Fast)
Manual setting mode:
A1 Mode
Auto1 setting (Red)
Speed 0~9
A2 Mode
Auto2 setting (Green)
Speed 0~9
A3 Mode
Auto3 setting (Blue)
Speed 0~9
A4 Mode
Auto4 setting (White)
Speed 0~9
A5 Mode
Auto5 setting (Strobe)
Speed 0~9
A6 Mode
Auto6 setting (No Strobe)
Speed 0~9
A7Mode
Auto7 setting (Smooth)
Speed 0~9
A8Mode
Auto8 setting (Fade)
Speed 0~9
A9Mode
Auto9 setting (combined effect)
Speed 0~9
S1 Mode
Sound active1 setting (Red)
Speed 0~9
S2 Mode
Sound active2 setting (Green)
Speed 0~9
S3 Mode
Sound active3 setting (Blue)
Speed 0~9
S4 Mode
Sound active4 setting (White)
Speed 0~9
S5 Mode
Sound active5 setting (Strobe)
Speed 0~9
S6 Mode
Sound active6 setting (No Strobe)
Speed 0~9
S7 Mode
Sound active7 setting (Smooth)
Speed 0~9
S8 Mode
Sound active8 setting (Fade)
Speed 0~9
S9 Mode
Sound active9 setting (combined effect)
Speed 0~9
d Mode
DMX setting.
IR Mode
“Ir 1” ON receive IR remote signal, “Ir 0” OFF receive IR remote signal.
6. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
www.beamzlighting.com
Downloaded from www.Manualslib.com manuals search engine
7. Remote control IR introduction
www.beamzlighting.com
Downloaded from www.Manualslib.com manuals search engine
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly
change from one unit to the other. Specifications can be changed without prior notice.
WARRANTY CONDITIONS
The date the product leaves the importer is considered to be the date the warranty begins. Only companies approved by Tronios are
allowed to work on the equipment. During warranty period (defective) equipment must be returned to the dealer by pre-paid mail in the
original box. Potentiometers have a limited lifetime and are not covered by the manufacturer for more than normal use.
For all service enquiries, refer to your local distributor,as he is best able to help you.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would
also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or
disrespect of the warnings contained in this manual. Tronios cannot be held responsible for personal injuries caused by a
disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.
ES
 Las especificaciones y el diseño están sujetas a cambios sin previo aviso.
PROTECCIÓN DEL MEDIO AMBIEN
Al fin de la vida útil del conjunto, tenga en cuenta que ontiene materiales que pueden ser reciclados/ procesados.
No deseche el conjunto a un contenedor normal de basura, sino llévelo a un depósito para pequeños desperdicios químicos. Esto aplica también a
las baterías.
NL
Afgedankte artikelen !!
Raadpleeg eventueel www.wecycle.nl en/of
www.vrom.nl v.w.b. het afdanken van elektronische apparaten in het kader van de
WEEE-regeling. Vele artikelen kunnen worden gerecycled, gooi ze daarom niet bij het huisvuil maar lever ze in bij een gemeentelijk
depot of uw dealer. Lever ook afgedankte batterijen in bij uw gemeentelijk depot of bij de dealer, zie www.stibat.nl
.
Alle (defecte) artikelen dienen gedurende de garantieperiode altijd retour te worden gezonden in de originele verpakking.
* Onder voorbehoud :
Specificaties zijn specifiek, toestel kan hiervan afwijken. Specificaties kunnen veranderd worden zonder kennisgeving.
Voer zelf geen reparaties uit aan het toestel; in élk geval vervalt de totale garantie.
Ook mag het toestel niet eigenmachtig worden gemodificeerd, ook in dit geval vervalt de totale garantie.
Ook vervalt de garantie bij ongevallen en beschadigingen in élke vorm t.g.v. onoordeelkundig gebruik en het niet in achtnemen van het
gestelde in deze gebruiksaanwijzing. Tevens aanvaardt Tronios geen enkele aansprakelijkheid in geval van persoonlijke ongelukken als
gevolg van het niet naleven van veiligheidsinstructies en waarschuwingen . Dit geldt ook voor gevolgschade in wélke vorm dan ook.
DE
Tronios BV Registrierungsnummer : DE51181017 (ElektroG).
Dieses Produkt
darf am Ende seiner Lebensdauer nicht über den normalen Haushaltsabfall entsorgt werden, sondern muss an einem sammelpunkt für das Recycling
abgegeben werden. Hiermit leisten Sie einen wichtigen Beitrag zum Schutze unserer Umwelt.
Tronios BV Registrierungsnummer : 21003000 (BatterieG).
Lithiumbatterien und Akkupacks sollten nur im entladenen Zustand in die Altbatteriesammelgefäße bei Handel und bei öffentlich-rechtlichen Entsorgungsträgern gegeben
werden. Bei nicht vollständig entladenen Batterien Vorsorge gegen Kurzschlüß treffen durch Isolieren der Pole mit Klebestreifen.
Der Endnutzer ist zur Rückgabe von Altbatterien gesetzlich verpflichtet.
Die Spezifikationen sind typisch. Die Werte können leicht von einem Gerät zum anderen ändern. Spezifikationen können ohne vorherige Ankündigung geändert werden.
Alle (fehlerhafte) Ware bitte immer in der Originalverpackung an den Fachhändler senden.
*Änderungen und Druckfehler vorbehalten.
www.beamzlighting.com
Downloaded from www.Manualslib.com manuals search engine
CE Declaration of Conformity
Importer:
Tel :
Fax :
TRONIOS BV
Bedrijvenpark Twente 415
7602 KM - ALMELO
0031546589299
0031546589298
The Netherlands
Product number:
151.230
Product Description:
Beamz, LED PAR 64 Can 18x 10W Alu Quad IR DMX
Regulatory Requirement:
EN 60598-1/-2
EN 55015
EN 61547
EN 61000-3-2/-3-3
The product meets the requirements stated in the above mentioned Standards. This
certificate does not cover the aspects that may be relevant such as performance and fitness
for purpose.
Almelo,
26-02-2013
Signature :
www.beamzlighting.com
Downloaded from www.Manualslib.com manuals search engine
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement