Ametek - Jofra ETM-2000 Series Easy Temperature

Ametek - Jofra ETM-2000 Series Easy Temperature
December 2000
Issue 1
The ETM-2000 series
Easy Temperature Measurement
G Complete solutions
- Minimize the risk of errors
G Flexible solutions
G
G
G
G
G
PRODUCT DESCRIPTION
FUNCTIONS - ALL MODELS
As a result of the introduction of quality management systems
such as ISO-9000, HACCP, etc., as well as increased focus
on hygiene, environment and security, demands to minimizing
risks and errors have grown. To meet these demands you
need reliable and efficient measuring equipment.
AMETEK has composed a number of complete solutions for
temperature measurement (the ETM-2000 series) and for
pressure measurement (the EPM-2000 series). Each system
is a complete kit that is delivered in a practical, lightweight
carrying case, making it easy to carry around to the various
measuring sites. The configuration eliminates the chance of
forgetting probes, contact paste, or the operating manual.
- May be supplemented as needs change
Data logging
- Collect and document data from critical measure
ments
Computer software
- Analyze, present, and store critical measurements
Industry protected
- The instrument is protected with a rubber boot
Practical details
- Instruments may be carried on the belt or placed on
a surface
A safe buy
- Built-in AMETEK quality and features such as
confidence, efficiency, technical support, and service
Backlight: The display light is on as long as the key is
activated.
Display Hold: Freezes the reading – used when watching
the probe is more important than watching the indicator.
Auto switch-off: Auto switch-off after 12 minutes. Extends
battery life (auto switch-off does not operate in max/min mode
or logging mode. The user can also turn off this feature if not
required).
Set-up retention: The instrument switches on with the last
settings used.
FUNCTIONS - SPECIFIC MODELS
SpeedRead>>: This function calculates the temperature after
just 14 seconds in the medium, saving operator time.
With 5 different systems the ETM-2000 series (Easy Temperature Measurement) covers a broad variety of applications
within temperature measurement. The series has 3 systems
for thermocouples and 2 for Pt100 probes. Both Pt100 models
feature IP67 protection making them very suitable for use in
damp rooms in dairies, slaughterhouses and similar food
environments. 3 of the 5 systems feature ”Speed-Read” functions which calculate the temperature after just 14 seconds in
the medium. This saves the operator time when measuring
granulate, powder, and air. Data collection is an option in both
the Pt100 system and the thermocouple system. Results are
shown on the display or on a PC.
A/B, A-B: Enables the user to select input channel A, channel
B, or the difference between them.
C/F: Toggle between Celsius and Fahrenheit.
Range lock: Enables the operator to set the instrument to 1°
resolution only.
Thermocouple selection: Change between the different
thermocouple types.
Max/Min: Stores maximum, minimum, and average temperatures.
Logging on demand: Allows logging up to a maximum of
250 readings.
Pre-set interval logging: Allows readings to be stored automatically at a pre-set time interval.
-1-
December 2000
Issue 1
FUNCTIONAL COMPARISON
ETM system 1
GENERAL INDUSTRY
Simple and sturdy instrument to be used wherever
temperature measurement is required bearings, lubricating oil, ambient air, liquids in
tanks, operational tests, and start of systems, etc.
Instrument: ETM-2000
Probes:
General-purpose probe 2101013
Air probe 2301001
Flexible wire cable probe 2304001
Surface probe 2201002
Including:
Contact paste, batteries, protective
rubber boot, carrying case with
foam inserts, and instructions
System
Probe type
Dual Input
SpeedRead
°C and °F
Hold
Fixed resolution
MAX/MIN reading
Average
Data logging
Adjustment from front
Temperature range:
ETM system 2
GENERAL INDUSTRY WITH DATA COLLECTION
Same as system 1, but with more functions and
choice of probe types. Document your measurements with the data collection function, store min/
max values, or save time with the “SpeedRead“
function. PC analysis software may be added.
(EasyLink software and interface unit are not
included).
Instrument: ETM-2098
Probes:
See system 1
Including:
See system 1
1
K
l
Pt100:
Type K:
Type T:
Type J:
Type N:
Type R & S:
2
3
KTJNRS Pt100
l
l
l
l
l
l
l
l
l
l
l
l
l
l
4
5
Pt100 KTJNRS
l
l
l
l
l
l
l
l
l
l
l
l
-150 to 800°C (-238 to 1472°F)
-200 to 1350°C (-392 to 2462°F)
-250 to 400°C (-418 to 752°F)
150 to 750°C (302 to 1382°F)
-200 to 1300°C (-392 to 2372°F)
0 to 1750°C (32 to 3182°F)
PHYSICAL SPECIFICATIONS
Operating temperature: ..................... –10°C to 50°C (14°F to 122°F)
Model ETM-2000, ETM-2029, ETM-2098: ................................. IP65
Model ETM-2024, ETM-2084: .................................................... IP67
Dimensions: ............................ 155 x 67 x 40 mm (6.1 x 2.6 x 1.6 in)
Weight: ........................................................................ 180 g (6.4 oz)
Shipping details complete systems:
Dimensions: ...................... 395 x 350 x 100 mm (15.5 x 13.8 x 4 in)
Weight app.: ................................................................... 2 Kg (4.4 lb)
CE label ....................................................................................... YES
ETM system 3
FOOD INDUSTRY
Precise Pt100 measuring instrument in an IP67
waterproof design. Check frozen meat, coldstorage rooms, fermentation processes, bunker
fuel tanks, pasteurization systems, ovens,
hotplates, etc.
Instrument: ETM-2024
Probes:
General-purpose probe 121908
Air probe 120909
Needle shaped probe 121910
Including:
Batteries, rubber protection boot,
carrying case with foam inserts,
and instructions
ETM system 4
FOOD INDUSTRY WITH DATA COLLECTION
Same as system 3, but with more functions.
Document your measurements with the data
collection function, store min/max values or save
time with the “SpeedRead” function. PC analysis
software may be added. (EasyLink software and
interface unit are not included).
Instrument: ETM-2084
Probes:
See system 3
Including:
See system 3
FUNCTIONAL SPECIFICATIONS
Accuracy model ETM-2000, ETM-2029, ETM-2098
K, T, J, N above –100°C (-148°F): ............ 0.1% rdg ±0.2°C (0.36°F)
K, T, J, N below –100°C (-148°F): ............ 0.5% rdg ±0.2°C (0.36°F)
R, S: .............................................. Better than 0.1% F.S. ±0.2% rdg.
Accuracy model ETM-2024, ETM-2084
Pt100: ..................................................... ±0.2% rdg ± 0.1°C (0.18°F)
(All accuracies are ±1 digit)
The above mentioned specification is obtained by combining the
accuracy and any uncertainty due to the measurement process.
However exclusive of the inaccuracy of the probe.
“SpeedRead”: This function reduces the accuracy from
Class 0.5 to 2 (CEN TC141/WG12 N42E applies).
Resolution: .............................. 0.1° up to 199.9°C (392°F) or else 1°
Battery type: ................................................ 2 AA or equivalent cells
Battery life: ......................................................... Typically 500 hours
Auto switch-off: ............................................................... 12 minutes
Low battery indication: .......................... Symbol appears on display
Cold junction compensation: .............................. Yes (system 1,2,5)
ETM system 5
HEATING AND VENTILATION
Sturdy general purpose system for temperature
measurements in energy installations. Adjustment/
control, measurements in thermometer wells or
direct on pipes (through the insulation), flue gas
temperatures on small oil-fired furnaces, radiator
surface and room temperature measurements, etc.
Instrument: ETM-2029
Probes:
General-purpose probe 2101013
Flue gas 2501023
Flexible probe 2304001
Surface probe 2202001.
Including:
See system 1
PROBE SPECIFICATIONS
Type K (IEC 584 Class 2): ........... ±2.5°C (±3.5°F) or 0.0075 x Tactual
(Whichever is greatest)
Type Pt100 (IEC 751 Class A): ................... ± 0.15°C + 0.002 x Tactual
(±0.27°F + 0.002 x Tactual)
-2-
December 2000
Issue 1
GENERAL-PURPOSE PROBES
PART NO. DESCRIPTION
121908
Pt100. Probe length 150mm (6in), OD 3mm (0.12in).
Acid-proof steel. ** With handle.
2101030 TC-K. Probe length 1000mm (40in), OD 6mm (0.24in).
Heat-resisting steel. ** With handle.
* T(water)=4.2 T(air)=87
2101003 TC-K. Probe length 150mm (6in), OD 1.5mm (0.04in).
Heat-resisting steel. ** With handle.
Quick reaction time * T(water)=0.3 T(air)=11
2101013 TC-K. Data as 2101003, but OD 3mm (0.12in).
2101025
TC-K. Probe length 400mm (16in), OD 6mm (0.24in)
with small OD 1.5mm (0.04in) point.
Stay tubes in stainless steel. ** With handle.
* T(water)=0.3 T(air)=11 “quick reaction time”
TEMPERATURE
-50 to 250°C (-58 to 482°F)
Max. 1000°C (1832°F)
(shortly up to 1150°C
(2102°F))
Max. 850°C (1562°F)
(shortly up to 950°C)
(up to 1742°C)
Max. 1000°C (1832°F)
* T(water)=1.3 T(air)=35
Max. 800°C (1472°F)
(the point shortly 950°C
(1742°F))
AIR/SPACE PROBES
2301001
121909
2301011
121964
2304001
2304005
2304010
TC-K. Probe length 100mm (4in), OD 6mm (0.24in).
Freely exposed probe element protected against
radiation. Stainless steel. Especially for
air measurements. ** With handle.
Pt100. Data as 2301001, but with Pt100 element.
TC-K. Data as 2301001, but with an attached plug.
Pt100. Data as 2301001, but with Pt100 element and
an attached plug.
TC-K. Flexible wire cable, glass silk insulated
2 x 0.2mm (0.008in). Length 1.5m (9ft).
TC-K. As 2304001 but with a length of 5.0m (16.4ft).
TC-K. As 2304001 but with a length of 10.0m (33ft).
Max. 250°C (482°F)
-50 to 250°C (-58 to 482°F)
Max. 250°C (482°F)
-50 to 250°C (-58 to 482°F)
Max. 400°C (752°F)
Max. 400°C (752°F)
Max. 400°C (752°F)
NEEDLE SHAPED PROBES
2401011
121910
2401021
121963
2401030
TC-K. Probe length 100mm (4in), OD 3mm (0.12in).
Needle shaped handle with cross grab for easy
removal from frozen meat, etc.
All in stainless steel. With spiral cable and plug.
Pt100. Data as 2401011, but with Pt100 element.
TC-K. Probe length 100mm (4in), OD 3mm. (0.12in).
Needle shaped for easy removal from fresh food, etc.
Stainless steel. ** With handle.
Pt100. Data as 2401021, but with Pt100 element.
TC-K. Oven/roasting probe. Probe length 100mm (4in),
OD 3mm (0.12in). Stainless steel. Angled probe with
needle shaped point. Heat-resisting lead wires,
length 1.5m (9ft) and plug.
Max. 400°C (752°F)
-50 to 250°C (-58 to 482°F)
Max. 400°C (752°F)
-50 to 250°C (-58 to 482°F)
Max. 400°C (752°F)
SURFACE PROBES
2201002
2202001
2202010
TC-K. Probe length 30mm (1.2in), OD 9mm (0.35in).
Sturdy probe for general use. ** With handle.
TC-K. Probe length 150mm (6in), OD 4mm (0.16in).
Well suited for e.g. surface measurement on
insulated tubes and at the bottom of
thermopockets. ** With handle.
TC-K. Angled surface probe.
Probe length 200mm (7.9in), OD 4mm (0.16in).
Well suited for places that are hard to access.
Max. 500°C (932°F)
Max. 400°C (752°F)
Max. 400°C (752°F)
FLUE GAS PROBES
2501023
TC-K. Probe length 250mm (10 in), OD 6 mm (0.25 in).
Exchangeable thermocouples. Flue gas tap for
CO2 or O2 measuring equipment. Adjustable screw
thread cone with setscrew. The probe has a metal
handle, spiral cable and plug.
Max. 800°C (1472°F)
* T = Time constant. The time required to reach 63% of the temperature in water or air. Stated in seconds.
** Mounted with a sturdy plastic handle (tolerates max. 110°C (230°F)). Spiral cable, length 30 to 150cm (1 to 5ft)
and plug matching the ETM-2000 series.
-3-
December 2000
Issue 1
LOGGING
EasyLink software package
SYSTEMS & INDICATORS
PART NO.
DESCRIPTION
The ETM models with logging functions can log up to
250 measurement points. For example, readings can
be taken over a two day period once every ten minutes.
You may preset the interval between the measurements
directly on the key pad of the ETM instrument. All
measurements are fully traceable with records on date
and time. You may either view the measured data directly
from the display of the ETM instruments or download the
data to a computer using the EasyLink software.
75-ETM-System 1F General industry (Fahrenheit) (ETM-2000)
75-ETM-System 1C General industry (Celcius) (ETM-2000)
75-ETM-System 2 General industry with data collection
(ETM-2098)
75-ETM-System 3 Food industry (ETM-2024)
75-ETM-System 4 Food industry with data collection
(ETM-2084)
75-ETM-System 5 Heating and ventilation (ETM-2029)
Models with logging functions have an infrared interface
on the back. Via the EasyLink interface unit all data logged
may be transferred to a computer. EasyLink is a Windows-based program with clear icons for each different
function.
ACCESSORIES & OPTIONS
SYSTEM PART NO.
34
125
25
125
25
25
34
125
25
All
All
All
All
24
DESCRIPTION
121985
121983
122523
120517
120515
120514
122525
2206011
Extension cable - Pt100 probes, 5.0 m (16.5 ft)
Extension cable - Type K probes, 5.0 m (16.5 ft)
Extension cable - Type N probes, 5.0 m (16.5 ft)
Spare thermocouple plugs Type K (yellow)
Spare thermocouple plugs Type T (blue)
Spare thermocouple plugs Type N (orange)
Spare Pt100 plug for the ETM-2000 series
Wire adapter for spare thermocouples
wire Type K. Plugs on one end and correct
materials on the other.
Suitable for concrete measurements
2206012 Data as 2206011 but for Type T.
120913 Tube with 100 g contact paste for surface
measurements max. 200°C (392°F)
105487 Rubber boot for all ETM-2000 instruments
105763 Black plastic carrying case w/foam inserts
105766 User manual for the ETM-2000 series
105765 EASY-LINK PC software package with
analysis software, interface unit, and
RS-232 cable
The software can show data in graphical format. Zoom
in on data of particular interest and allows for comparison with previous data to illustrate deviations, etc.
Analyse, print or download data to spread-sheets, data
bases, or directly into reports. Reduce the risk of
clerical errors and save keying-in time of results.
2 year warranty
AMETEK is a leading global manufacturer of electrical and electromechanical products for niche
markets. Listed on the New York Stock Exchange (AME) since 1930, AMETEK’s annual sales are
approaching $1billion. Operations are in North America, Europe and Asia, with about one third of
sales to markets outside the United States.
AMETEK Test & Calibration
Instruments
8600 Somerset Drive
Largo, Florida 33773, USA
Tel
+1 (727) 536-7831
Tel
+1 (800) 527-9999
Fax
+1 (727) 539-6882
AMETEK Denmark A/S
Gydevang 32-34
Post Office Box 30
DK-3450 Allerød
Denmark
Tel
+45 4816 8000
Fax
+45 4816 8080
E-Mail [email protected]
AMETEK Precision
Instruments Europe GmbH
Postfach 2165
D-40644, Meerbusch
Germany
Tel
+49 2159 9136 0
Fax
+49 2159 9136 39
Information within this document is subject to change without notice.
AMETEK Singapore Pte. Ltd.
10 Ang Mo Kio Street 65
#05-12 TECHPOINT
Singapore 569059
Tel
+65 484 2388
Fax
+65 481 6588
E-Mail [email protected]
ISO 9001
Manufacturer
AMETEK is a registered trademark of AMETEK, Inc.
Pub Code SS-CP-2283-1200
Issued 12/00
Copyright 2000, by AMETEK Inc.
-4-
www.ametek.com/tci
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement