User`s Manual for ZKMD3 Series IR Vandal

User`s Manual for ZKMD3 Series IR Vandal
User’s Manual for ZKMD3 Series IR
Vandal-proof Dome IP Camera
Document Version: 1.7
Date: 2012.12
Introduction
This document mainly introduces the functional features, installation process and
access methods of ZKMD3 series IPC. .
Important Notices
Thanks for selecting our company’s IPC. Before use, please read through the user’s
guide to avoid any unnecessary damage!
All functions depend on the actual product. Since the product is subject to updating,
our company is not responsible for any difference from this guide and not liable for
any dispute over different technical parameters from this guide. The project is
subject to any change without notice.
To learn more, please visit our company’s website www.zkivision.com or local
office.
Table of Contents
Table of Contents
1 Overview................................................................................................................ 1
1.1 Product Description ..................................................................................... 1
1.2 Product Features .......................................................................................... 1
1.3 Technical Parameters ................................................................................... 3
1.4 Product Appearance ..................................................................................... 5
1.5 Connecting Terminals .................................................................................. 7
1.6 Basic Procedure .......................................................................................... 11
2 Installation and Network Configuration .......................................................... 12
2.1 Hardware Installation................................................................................. 12
2.2 Network Connection .................................................................................. 17
3 Accessing device .................................................................................................. 18
3.1 Using WEB Browser ................................................................................. 18
3.2 Using RTSP Media Player ......................................................................... 19
3.3 Using Mobile Devices ............................................................................... 21
3.4 Using Video Surveillance Software ........................................................... 23
I
Overview
1 Overview
1.1 Product Description
The ZKMD3 series products are day/night vandal-proof color IP cameras, which
feature the aluminum alloy die casting design and IP66 protection grade.
The series products are equipped with 2-megapixel CMOS sensors or high-quality
CCD sensors made by Sony, which feature the long-distance infrared lamp
projection, wide projection angle and night vision capability. The optimized H.264
coding algorithm guarantees the transmission of sharp and smooth video effect. The
embedded Web Server enables users to conveniently implement real time
surveillance and remote control for front end cameras via browser.
The series products are either megapixel (high definition) or common pixel
(standard definition) cameras, which can be wall mounted or ceiling mounted, easily
installed and operated, and used in indoor or outdoor places. The products are
applicable for the places requiring short distance and wide angle, tight security and
all-weather surveillance, such as residence communities, factories and banks, as well
as the occasions requiring remote network video.
1.2 Product Features

Hi3512 high-performance multimedia processor, supporting H.264 Main
Profile video coding

Dual code stream, suitable for various networks

Support all kinds of protocols, such as, TCP/IP, HTTP, TCP, UDP, ARP,
SMTP, FTP, DHCP, DNS, DDNS, NTP and UPNP, etc.

Aluminum alloy die casting design, IP66 protection grade, and best dustproof,
waterproof, anti-corrosion and anti-riot effect

Either wall mounted or ceiling mounted, and wide scope of uses

Snap-on base to simplify the installation
1
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7

Safe and reliable socket head lock screws

Double-glass front cover for better optical isolation and mist prevention
surface for better night viewing

Three-layer shield +magnetic ring design to eliminate signal interference

Numerous additional functions, e.g. alarm, audio talkback, 485 control, TF
card and reset, etc.

Support Ethernet power supply (PoE 802.3af regulation) (optional)

Support WIFI (802.11b/g/n standard) wireless network module (optional)

IR-Cut filters to automatically switch between day and night for optimal
monitoring

Double web indicator lamps for easy judgment of web status

4~9mm focus-adjustable lens, adjusted according to different environment

Analog video output interface (for HD) to facilitate site commissioning

Self-recovery from abnormality and auto reconnection after network
interruption

Automatically capture images during an alarm and send them to the designated
email

Support motion detection and external detector alarm

Allow setting several alarm times and support the remote alarm linkage

Support dynamic IP (DHCP) and dynamic domain name system (DDNS)

Network time synchronization (NTP)

HD cam to support the browsing by 14 users simultaneously, 4 in primary
code stream and 10 in secondary code stream

SD cam to support the browsing by 20 users simultaneously, 10 in primary
code stream and 10 in secondary code stream
2
Overview
1.3 Technical Parameters
Product Name
Product Model
Anti-Riot Infrared Semi-Spherical IP Camera
ZKMD372
ZKMD352
1/3" megapixel progressive
1/3.2" two-megapixel
CMOS sensor
progressive CMOS sensor
Cam Properties
Image Sensor
WDR HD
HD
Image Resolution
1280×720
Day/Night Switch
IR-Cut filter switch
Type of Lens
4~9mm manual aperture lens
Minimum Brightness
1 Lux (IR lamp off), 0 Lux (IR lamp on)
25 built-in Φ5 infrared lamps, 10~15m effective projection distance,
IR Lamp
60 degrees projection angle
Video Coding
Primary Processor
Hi3512
Operating System
Embedded Linux
Video Compression
H.264 main profile level 3
Algorithm
Audio Compression
G.726/G.711
Algorithm
Video Compression Code
32~6114 Kbits/s adjustable
Rate
Primary Code Stream 1280x720
Video Resolution
Secondary Code Stream 320x240
Video Frame Rate
1~25 frames optional
Brightness, Saturation, Contrast, Illumination, Sensitivity, Shutter,
Video
WDR HD
Image Up/Down, Image Left/Right, Night Vision Mode, Wide
Dynamic Mode adjustable
Parameters
HD
Brightness, Saturation, Contrast, Image Up/Down, Image Left/Right
3
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
adjustable
Functional Interfaces
Audio Interface
Alarm Input
1 Mic input and 1 linear output (optional)
1 alarm input (normally opened or normally closed) (optional)
1 switch output, maximum working voltage: AC 120V/1A, DC
Alarm Output
24V/1A
Motion Detection
Allow 4 independent detection areas
Control Interface
1 RS485
Support TF card for video storage and image capture, 32G maximum
Memory
(optimal)
10Base-T/100Base-TX Ethernet interface
Network Interface
WiFi 802.11b/g wireless (optional)
Supported Network
TCP/IP, HTTP, TCP, ICMP, UDP, ARP, IGMP, SMTP, FTP, DHCP,
Protocols
DNS, DDNS, NTP, UPNP and RTSP, etc.
Working Environment
DC 12V, ≥1.5A
Input Power
POE Ethernet power supply: comply with 802.3af regulation (optional)
Maximum Power
8W
Consumption
Working Temperature
-20~+55 °C
Working Humidity
10%~95%RH
Level of Protection
IP66
Installation Mode
Wall-mounted
4
Overview
1.4 Product Appearance

Diagram of ceiling mounted mode
fixing base
camera
transparent cover

Diagram of wall mounted mode
wall mounted
bracket
fixing base
camera
transparent
cover

Dimensional drawing of ceiling mounted mode (in mm)
Right View

Dimensional drawing of wall mounted mode (in mm)
5
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
Right View
Front view
6
Overview
1.5 Connecting Terminals
(8)
(7)
(6)
(5)
(4)
(3)
(2)
(1)
1.
Power Interface: Connect to the adapter. This IPC employs the power supply
of DC 12V and no lower than 1.5A. Do not use any different power supply as
it may damage the camera.
2.
Network Interface: 10/100M self-adapting Ethernet interface is used to
connect the camera with various network equipments, such as, switch, router
and hub. When it is connected to 10M network, the orange lamp is also on.
When it is connected to 100M network, the green lamp is always on.
This interface can also employ Ethernet power supply (POE, optional) and allow the
transmission of power and data through Ethernet cable.
P oE S w icth
3.
Reset Button: When the camera fails to function during incorrect operation or
accidental failure (e.g. forget IP address or password), or it is used in different
scenes, press down the button for above 5s after a delay of 30s from powering
on to restore the camera to its factory default. The default user’s name is
“admin”, the default password is “admin” and the default IP address is
“192.168.1.88”.
7
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
4.
Alarm Interface: Connect to alarm input and alarm output. When the camera
receives an alarm from alarm output or Web motion detection, this interface
can send a signal to alarm output to realize real-time monitoring and overall
protection while triggering a remote alarm. The specific interfaces are
presented in the following figure.
12345
1)
NC
COM
NO
GND
IN
Alarm output
Alarm input
The schematic diagram of alarm input connection is as follows:
Alarm Input
Terminals
(IN,GND)
switch
Alarm
Input
Device
Power Supply of
Alarm Input Device
Schematic Diagram of Alarm Input (Normally Opened) Connection
Alarm Input
Terminals
(IN,GND)
switch
Alarm
Input
Device
Power Supply of
Alarm Input Device
Schematic Diagram of Alarm Input (Normally Closed) Connection
8
Overview

Notice: When external alarm input is started, different alarm inputs have
different software settings. Please select “Normally Opened” or “Normally
Closed” on the Web page according to the type of alarm input, as detailed in
WEB Server User Manual.
2)
The schematic diagram of alarm output default connection is as follows:
Alarm Output
Terminals
(COM,NO)
Alarm
switch
Output
Device
Power Supply of
Alarm Output Device
Schematic Diagram of Alarm Output (Normally Opened) Connection

Note: The connection with normally opened alarm output (e.g. normally
opened lock) is performed as shown in the following schematic diagram.
Alarm Output
Terminals
(COM,NO)
Alarm
switch
Output
Device
Power Supply of
Alarm Output Device
Schematic Diagram of Alarm Output (Normally Closed) Connection
5.
RS485 Interface: Supports standard 485 PTZ protocols, for remote device
control. The camera can be turned remotely and monitored in all directions.
9
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
The relevant parameters are set as detailed in WEB Server User Manual. The
specific interface is shown in following figure.
123
6.
485+
485GND
Audio Input Interface: Connect to external audio acquisition (e.g. MIC) for
sound acquisition as detailed in WEB Server User Manual.
7.
Audio Output Interface: Connect to audio player (e.g. active speaker) for
sound broadcasting.
8.
Analog Video Output Interface: Special for SD camera and engineering
commissioning. After being installed and connected, this interface can be used
locally to connect with the image display device and adjust the camera angle
to the appropriate monitoring area according to the scene in the video.
10
Overview
1.6 Basic Procedure
1.
Unpack and check whether any component is missing;
2.
Connect the camera to computer by means of patch cable;
3.
If your computer IP is in a network section different from camera IP, please set
it to the same network section as camera IP, such as, 192.168.1.87.
4.
Log in the camera through client software or browser to check whether the
video functions normally;
5.
Adjust the code stream and other video parameters;
6.
Modify the network parameters of camera and reboot the device;
7.
Repeat Step 3;
8.
Revisit the camera through client software or browser to check till the video
functions normally;
9.
Install the camera and adjust the camera angle to the appropriate area;
10.
Visit the camera through client software or browse for video monitoring.
11
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
2 Installation and Network Configuration
2.1 Hardware Installation

Installation Notices:
1.
Read through the guide for installation prior to installation.
2.
Check whether any component is missing against the packing list, if yes,
please contact your supplier.
3.
Wire during power off. If the camera does not function normally during
operation, please cut off the power before check.
Do not connect cables when power is on!

Notice: The wiring during power on may seriously damage the camera,
which will be disqualified from the guarantee.
DC12V/1.5A
4.
Use the power supply of DC12V and no lower than 1.5A for the camera or
PoE power supply (optional). Too high or low voltage, or AC power supply
may cause the abnormal operation of the camera.
12
Installation and Network Configuration
5.
Use the standard power cord when the power supply is too far away from the
camera, and consider the voltage drop caused by long distance.
6.
Read through the instructions for connecting terminal and wire strictly
according to interfaces. Any damage to the camera due to improper operation
will be disqualified from the guarantee.
7.
All the exposed parts of connecting terminal should not exceed 5mm, in order
to prevent any accidental contact from damaging the camera.
Uncovered cable should be less than 5mm
123
8.
Mount the relay equipment in the middle to avoid signal attenuation when the
straight communication distance from the camera to the incoming equipment
exceeds 80m.
Please use repeater when exceeding 80m
9.
When RS485 is employed, if the communication distance exceeds 100m, the
final equipment on the 485 bus must be connected to a 120Ω terminal
resistance in parallel.
10.
Pay attention to provide lightning protection if the camera is mounted outdoor.
Do not touch the camera during lightning.
13
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
11.
Use the camera in the working conditions:
Ambient temperature: -20 ℃ ~ +55 ℃; ambient relative humidity: 10% ~
95%RH.
12.
Please keep the lens and transparent cover clean. If the transparent cover is
dirty, please wipe it with clean soft cloth.
14
Installation and Network Configuration

Ceiling mount installation method:
wiring hole
positioning
hole
Installation template for ceiling mounted mode (unit: mm)
③
②
④
①Affix the paper template to the ceiling and drill holes according to the marked
circles in the paper template.
②Affix the camera and pedestal to the ceiling by 4 screws.
③Adjust the lens angle to appropriate surveillance area.
④Tighten the screws to fix the transparent cover.
15
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7

Wall mount installation method:
wiring hole
positioning hole
Installation template for wall mount method (unit: mm)
③
②
④
⑤
①Affix the paper template to the wall and drill holes according to the marked
circles in the paper template.
②Affix the pedestal to the wall by 4 screws.
③Hang the camera in the pedestal and tighten the 4 screws, to fix the camera in
related pedestal..
④Take off the transparent cover from camera by screwdriver, and adjust the lens
angle to appropriate surveillance area.
⑤Tighten the screws to fix the transparent cover.
16
Installation and Network Configuration
2.2 Network Connection
The device can be connected to network in two ways. The first way is to connect to
the network by means of Ethernet cable, and the second way is to connect to
wireless network (optional).
 .............................. Connect by Ethernet Cable
(1)
Use Ethernet cables to connect the device to network or directly to computer.
(2)
Connect the power supply of the device.
(3)
During normal connection, if it is a 10M network, the orange lamp is always
on; if it is a 100M network, the green lamp is also on. The physical connection
with network is completed after the lamp shining.
(4)
In the “Start” menu, select “Programs”--“Accessories”--“Command Prompt”,
and input the ping command to the device address (e.g.: type in “ping
192.168.1.88”). If “Request timed out” does not pop up, the device is
successfully connected to network.

Notice: 1) The default IP address is “192.168.1.88” and the default HTTP
port is 80. If needed to change IP address or port, refer to Network Setting in
WEB Server User Manual.
2) If the device is in a network section different from computer, refer to How
to Visit IPC on Internet in WEB Server User Manual for the connection
during different network sections.
 .............................. Connect to Wireless Network
Before starting the wireless network, connect the IPC to network by Ethernet cable,
visit the device through browser, enter “Network Setting” interface, and set the
wireless network connection following the operating procedure, as detailed in
Network Setting in WEB Server User Manual.
17
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
3 Accessing device
There are 4 methods can be used to access the device: WEB Browser, RTSP Media
Player, Mobile Device and Video Surveillance Software (ZKiVision client software).
3.1 Using WEB Browser
1.
Open a browser, type in the dynamic domain name or IP address of the device
(e.g. http://192.168.80.123), press "Enter" to open the following login interface:
2.
Type in user’s name and password, and click “OK” and the guide page will
show as below:
3.
Click Watch the video to enter Preview interface:
18
Accessing device

Note: When accessing the device via browser for the first time, it is necessary
to download the control. More details about how to use browser for video
surveillance, please refer to WEB Server User Manual in the supplied CD.
3.2 Using RTSP Media Player
1.
Download and install a media player supporting RTSP protocol, e.g. VLC
media player.
2.
Open the media player, select the menu “Media”—“Open Network Stream”,
pop up the input interface of URL.
19
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
3.
Type in the network URL in the form of rtsp://<IP address>:<RTSP
port>/<stream code>.
4.
Click “Play” and the media player will play the real-time video of the device.
20
Accessing device

Note: 1) The default RTSP port of device is 554. If it must be modified,
please refer to WEB Server User Manual in the supplied CD.
2) If it is necessary to learn about how to use RTSP media player for
video surveillance, please refer to WEB Server User Manual in the supplied
CD.
3.3 Using Mobile Devices
If it is necessary to use mobile device for video surveillance, please firstly ensure the
device can be accessed on Internet. Please refer to WEB Server User Manual in the
supplied CD for more details about how to visit device on Internet.
1.
Install the surveillance software in the supplied CD into the mobile device.
2.
Click the icon “Security Vision” to enter the software.
21
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
3.
Choose “Device List” and click “Add” to add devices, type in the user name,
password, domain name and port of the device, click “Save” to complete it.
22
Accessing device
4.
Choose “Live View” on the initial interface, click the cell and click again to
select the device to play its live video.

Note: 1) The operating system of mobile device must be Android or iOS or
BlackBerry.
2) As the internet service is required for watching video, please
consult with your internet service provider for specific charges.
3) Please refer to Security Vision User Manual (Mobile Phone) in the
supplied CD for more details.
3.4 Using Video Surveillance Software
ZKiVision Client Software is our company's free video surveillance software, which
can help manage and monitor multiple devices in a real-time manner. Install the
23
User’s Manual for ZKMD3 Series IR Vandal-proof Dome IP Camera V1.7
software in the supplied CD, and add devices to the software. Then the real-time
monitoring can be started. If needed to learn about how to use the video surveillance
software, refer to ZKiVision Client Software User Manual in the CD.
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement