Manual - SOH.cz
Ipcs*1W 9-Colors LCD DMX BUTTERFLY
MAGIC LED LIGHT
User's Manual
Unpacking:
Thank you for purchasing this product. Please read user guide for safety and before using
the product. Keep this manual for future reference. This product can create perfect light
programs and effects since it has passed a series of strictly tests before delivery. Please check
the attachments listed on the page after opening the carton. Immediately upon receiving
a fixture, carefully unpack the box. Check the box contents to ensure that all parts are present
and that they are in good condition. If any part appears damaged from shipping, or if the
box shows signs of mishandling, notify the shipper immediately. In addition, retain the box
and all the packing material for inspection.In any event, save the carton and all packing materi:
because, in case that you have to return the fixture to the factory, you will have to do so in its
original box, with its original packing.
1. LED Light: IPCS 2. Power Cable: 1PCS 3. User Guide: 1PCS
Safty Notice:
Please read the following notes carefully because they include important safety information
about the installation,usage and maintenance of this product. It is important to read all these
notes before starting to work with this product.
/LED Expected Lifespan D
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to
the
acceleration of this decline. Packaged in clusters, LEDs exhibit higher operating
temperatures than in ideal or singular optimum conditions. For this reason when all color
LEDs are used at their fullest intensity, life of the LEDs is significantly reduced. It is
estimated that a viable lifespan of 40,000 to 50,000 hours will be achieved under normal
operational conditions. If improving on this lifespan expectancy is of a higher priority,
place care in providing for lower operational temperatures. This may include climatic-
{em and the reduction of overall projection intensity.
и
Page 1
Feature:
€ With the newest LED technology, this LED light can creat an amazing and romantic
lighting effects for your place.
€ It has over 200 beams of LED lighting from the transparent case. The beams on the wall
looks like handreds of flowers drifting round and round.
€ Compact and lightweight, exquisite appearance, small size, streamline design, attractive
effects.
€ Clear and sharp lighting effects even without fog/smoke
Ф Базу to use, plug and play
€ LCD digital display, manual function: color selection, jumping, dimmer, strobe, Sound
Active
$ Stable working, no hassle on warranty
€ Automatic rotation once power on
€ Built-in microphone can trigger external sound
Specification:
€ LED power output: 9x1W
(Red:1W*1,Green:1W*1,Blue:1W*1,Yellow:1W:* 1,white:1W* 1, Violet 1W*1, orange
1W*1, pink 1W*1, warm white 1W*1)
€ long life working hours:20000 H
€ Rotation angle: 180°
& Cooling system: air cool
€ Working environment temperature: 0"C-40'C
€ Operation Modes: AUTO, SOUND ACTIVE, DMXS12, Master/Slave
© DMX channel: 6CH
€ Interface: 3pins XLR jack for DMX or Master-Slave linking
@ Input Voltage: 90V-240V AC 50-60Hz
® LED Light size: 252*245*245mm
O Net weight: 1.3Kg
e Gross Weight: 1.9Kg
© Inner box size: 255x255x255mm(().017chm)
1. working mode selection
2. UP (previous or speedy)
3. DOWN (next or slower)
4. Enter for confirmation
5. Built-in Michrophone
6.Digital LCD display
7. DMX IN 8. DMX OUT 9. Power jack 10. cooling fan
Page 2
TO e Fe i
Tes ona Tee
oi
о
uu
ACTION а,
Sound Active
e
a > RA
E ED RIRE
5
The change of the light pattern is controlled by sound, that is, the rhythm of the sound
control the effect of the changing light pattern. Turning the sensitivity knob in the
clockwise direction to increase the fixture’s sensitivity to sound, the knob in the counter
clockwise direction to decrease. The light diode will automatically turn off after 8
seconds when the music stops.
AUTO
Auto cycles the built-in programs without being controlled externally. It has no light OFF.
The mode allows a single unit to react to the beat of the music in the master mode.
1. Install the units in a suitable position (laying or appending).
2. Set dipswitch to select Sound Active or AUTO mode.
3. Turn on the unit power, the unit begins reset, then the unit begins working.
4. The unit will react to the low frequencies of music via the internal microphone.
Adjust the audio sensitivity knob on the back of the unit to make the unit more or less
sensitive in sound active. The panel has LED indicating for sound active.
Master-Slave Operation
This mode will allow you to link up to 32 units together without controller.
1. Install the units in a suitable position (laying or appending).
2. Choose a unit to function as Master mode, set dipswitch to select Sound Active or
AUTO mode. The others must be set to Slave mode, set dipswitch to select Slave mode.
3. Use standard XLR microphone cable chain your units together via the XLR connector
on the rear of the units. For longer cable runs we suggest a terminator at the last fixture.
Cabling must have a male XLR connector on one end and a female XLR connector on the other end.
O: Resistance 120 в
ohm 1/4w between
: O pin 2 (DMX -) and
O? pin 3 (DMX +) of
COMMON | the last fixture.
DMX + fe 1 A
3 @))| OUTPUT
NS Termination reduces signal errors. To
DMX - avoid signal transmission problems
and interference, it is always
‘advisable to connect a DMX signal
terminator.
Caution: Do not allow contact between the common and the ficture's chassis ground.
Grounding the common can cause a ground loop, and your fixture may perform erratically.
Test cables with an ohm meter to verify correct polarity and to make sure the pins are
not grounded or shorted to the shild or each other.
4. Turn on the all units' power, the units begins reset, then the unit begins working,
The slave units will react the same as the master unit.
5. The units will react to the low frequencies of music via the internal microphone.
Adjust the audio sensitivity knob on the back of the master unit to make the unit more
or less sensitive in sound active. The panel has LED indicating for sound active.
Universal DMX Operation (DMX mode)
This mode allows you to use universal DMX-512 console to operate.
1. Install the units in a suitable position (laying or appending).
2. Use standard XLR microphone cable chain your units together via the XLR connector
on the rear of the units. For longer cable runs we suggest a terminator at the last fixture.
3. Assign a DMX address to each the unit using dipswitches, see the "DMX Address
Quick Reference Char".
Light No 1 Light No 2 |—— Light No 3 || Light No ....
@ a De Rat Ч = a ng a iy
SO SA EA
og ©) 0 — po 2 ~~) Se 4
| * ++ |
DMX Signal
1: MASTER: SOUND/AUTO/DMX 2: SLAVE 2: SLAVE
4. Turn on the all units' power, the units begins reset, then the unit begins working.
5. Use DMX console to control your units.
Notes:
1. DMX console can not be used in Master-Slave operation (Sound Active or AUTO mode ).
2. There should be only one master unit in Master-Slave operation.
Page 4
LCD Digital display function:
x Menu: function selection
UP/DOWN: LED brightness adjustment, or
DMX512 address value, or lighting effects under
Auto and Sound Active mode
ENTER: Step motor speed level
MENU = DOWN UP
KEY:ENT
ep EN [aR
e KEY:UP
ris RER RE
as rials BA E
e a
dent TELE CM о $
NA MB Te pe La ul 3
e RECENT uu
KEY: UP
= № п вц дон а то ное 3
CA dE EE Una аи EE EEE EE ила яж т ЯВ te Ry et my Fig a Et at
nee a Ry GRR ; E he ge E ara a
e RE ой Es Tom me Me em hie rl
i a “RCA Me ie 3 + E an
a arte te y Mn e mueca у
4 KEY:DOWN
3 KEY:UP
PEAD, E oc
Fi ey ih ct a By |!
KEY:DOWN ——
KEY:MENU
KEY:ENT nus
ere
a AE
KEY:DOWN
4
KEY: UP
>
+
CKEY:DOWN
Quick Operation:
MENU: Red, green, blue LED brightness, AUTO, Sound Active, DMX512, Master/Slave.
UP/DOWN: Red, green, blue LED brightness adjustment in 32 levels; DMX512 address
value; Lighting effects on AUTO and Sound Active
ENTER: 9 levels on step motor spin speed
Page 5
4 Digits to display 7 levels functions:
Description
Digital display
Red Brightness: 1st digit stands for "Red", 2nd and
3rd digits stands for levels from 00 to 31, 4th digit
stands for 9 levels motor spin speed
Green Brightness: 1st digit stands for "Red", 2nd
and 3rd digits stands for levels from 00 to 31, 4th
digit stands for 9 levels motor spin speed
Blue Brightness: 1st digit stands for "Red", 2nd and
3rd digits stands for levels from 00 to 31, 41h digit
stands for 9 levels motor spin speed
AUTO display lighting effects: Ist digit stands
for AUTO, 2nd and 3rd digits stands for 11 |
kinds of effects, 4th digit stands for 9 levels of —
motor spin speed.
01: Red AUTO Strobe
02: Green AUTO Strobe
03: Blue AUTO Strobe
04: RG AUTO Strobe
05: RB AUTO
Sound Active display lighting effects: 1st
digit stands for SOUND, 2nd and 3rd digits
stands for 11 kinds of effects, 4th digit
stands for 9 levels of motor spin speed.
01: Red SOUND Strobe
02: Green SOUND Strobe
03: Blue SOUND Strobe
04: RG SOUND Strobe
DMXS12 mode: 001---512 stands for value
Slave mode
Page 6
DMX Control
The system only accepts the DMXS512 signal of international standard to control the system
mode, the light beam ON /OFF, running direction, running speed and twinkle speed etc.
DMX Control:
The LED light only accepts the DMX512 signal of international standard to control the light.
DMX Control Parameter Chart
Channel Function Value Description
0-63 |Close, LED OFF
i ade 64~127 |Sound active mode
128-191 ¡AUTO mode
192-255 |DMX mode
CH2 Red brightness| 0~255 {dim ----bright
CH3 Green brightness | 0—255 |dim ----bright
CH4 |Blue brightness| 0~255 |dim ----bright
0~31 |R-G-B-RG-RB-GB-RGB color selection
32-63 |R--G--B AUTO color change
63-127 |RG--RB--GB color change
CHS on he 128~191 |R--G--B--RG--RB--GB--RGB AUTO color change
192-223 |R--G--B Sound color change
224~239 |RG--RB--GB Sound color change
240—255 |R--G--B--RG--RB--GB--RGB Sound color change
0~63 |Nostrobe
CH6 LED Strobe 64—191 |AUTO strobe
192-255 |Sound Strobe
0-15 [No fade
CH7 LED fade 16-223 [AUTO fade
224-255 |Sound Fade
CHR Motor spin 0~95 |No spin
control 96-255 |Spin
CH9 Motor spin speed 0~255 |Slow --- Fast
Page 7
Lr Ears A Ay Fe и EEE EEE ; ee rn
en AA Dec TANTAS > ANS UN INS or
СВ cm Page A a EA
e - a = "Y L . Bi :
Fee E E " ® dP A Ld e Pe
Re у = |, +
e
ds
a J js La
pe TEE EE
see
я == a py mom le
pe ee dde Rd ran =
RE E A O
1. If the power supply indicator doesn't light up and the light doesn't work, please
check the power supply, the input voltage and the fuse.
2. In Stand-Alone operation, if the power supply indicator is light up and sound
active indicator isn't light up, but the light is shut off doesn't work.
A. Because sound is too small make for light shut off in sound active, please
increase the music volume or increase audio sensitivity with sensitivity knob,
please check as below.
B. Please check if unit has been set up in slave mode, then set up in master mode.
3. In Master-Slave operation, slave unit don't function, please check as below.
A. Make sure to there's only one master in the chain, and the others are set in slave mode.
B. Make sure to control the unit without DMX console controlling.
C. Make sure to take a good quality power cable and connection.
Warranty Warnings:
1. Damages caused by the disregard of this user manual are not subject to Warranty.
The dealer will not accept liability for any resulting defects or problems.
2. Please consider that unauthorized modifications on the device are forbidden due to
safety reasons. Please note that damages caused by manual modifications on the
device or unauthorized operation by unqualified persons are not subject to warranty.
3. If this device will be operated in any way different to the one described in this
manual, it may suffer damages and the guarantee becomes void. Furthermore, any
other operation may lead to dangers like short-circuit, burns electric shock, etc.
After trying the above solution you still have a problem, please contact your dealer
or our company for service.
Page 8
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement