user manual RDM BK86 UK A4

user manual RDM BK86 UK A4
www.technofase.com
RDM BK86
Version
Technical Manual
RDM BK86-5A
500mW 869.400 – 869.650 MHz
Page 1 of 15
www.technofase.com
GENERAL INDEX
Foreword .......................................................................................................................... 3
1. Safety instructions for the user and safety measures for the RDM BK86 system ............................ 4
Supplementary notes for RADIO interface appliances ................................................................. 5
2. Introduction ................................................................................................................... 6
2.1 Environmental characteristics ..........................................................................................................................6
3. Compliance with Standard ................................................................................................. 7
3.1 Reference Standard ........................................................................................................................................7
3.2 CEPT 70-03 Recommendation..........................................................................................................................8
3.3 Identification.................................................................................................................................................8
4. Technical data................................................................................................................. 9
4.1 Models available............................................................................................................................................9
4.2 Standard radio channels ..................................................................................................................................9
4.3 Communication interfaces .............................................................................................................................10
4.4 Power supply ..............................................................................................................................................10
4.5 Connections ................................................................................................................................................10
5. Assembly specifications .................................................................................................. 11
5.1 External assembly .......................................................................................................................................11
5.2 Assembly inside an electrical panel.................................................................................................................11
7. Labelling of the various models............................................ Errore. Il segnalibro non è definito.
7.1 RDM BK86-5A label ...............................................................................Errore. Il segnalibro non è definito.
8. Product guarantee ......................................................................................................... 12
8.1 Terms of the guarantee ................................................................................................................................12
9.1 Standard concerning disposal ......................................................................................... 13
Manufacturer...................................................................................................................................................15
Technical Manual
Page 2 of 15
www.technofase.com
Foreword
• This manual contains text, images and explanations for the correct installation and use of the RDM BK86
transceiver. It should be read and understood before the appliance is installed and used.
• This manual has been published subject to alteration. We reserve the right to modify this manual without
prior notice.
• As the system works by means of radio waves, transmission may, in certain cases, be influenced by the
environment and by the method of use. The manufacturer is not liable for any damage to persons and/or
appliances.
• Do not use the system near other appliances operating with radio waves as this could cause
malfunctioning.
IMPORTANT
• Do not remove or replace any parts of the system.
• Do not remove, alter or modify the identification plate on the back of the system. It is forbidden to use
the system without identification plates.
Hardware Manual
Revision: A.0
Date: 07/2013
Release: 07/2013
Technical Manual
Page 3 of 15
www.technofase.com
1. Safety instructions for the user and safety measures for the RDM BK86 system
This manual has been drawn up for use by trained and competent personnel. The qualification of the
personnel is defined in the European Directives on machines, low voltage and EMV. All the electrical
connections of RDM BK86 systems must be carried out by a technician who has specific training in local and
national electrical standards. Several symbols are used in this manual to highlight certain information. The
purpose of these symbols is to draw the attention of personnel involved to warnings concerning safety and
to safety measures. Whenever a symbol appears, the relevant note should be read and the information
followed carefully.
This symbol indicates an imminent danger causing damage to persons or property.
This symbol indicates a danger that could cause damage to persons or property.
This symbol indicates the need to check the harmonization for the use of radio frequency.
Caution
• Avoid proximity of less than 3 m with an electronic appliance (PC, portable telephone, etc.) which could
affect the high sensitivity of the
modem and consequently reduce its effective range.
• Before using the system, check that the supply voltage specified in its user manual corresponds to your
power source. If this is not the case
consult your supplier.
• Place the appliance against a flat firm and stable surface.
• The appliance should be installed in a location that is sufficiently ventilated to eliminate any risk of
internal overheating and should not be
covered by objects such as newspapers, cloths, curtains, etc.
• The appliance’s aerial should be in the open and at least 10 cm clear of any conducting material
• The appliance should never be exposed to sources of heat such as heating appliances.
• Do not place the appliance close to objects producing open flames such as candles, welding torches, etc.
• The appliance should not be exposed to aggressive chemical products or solvents that could affect the
plastic materials or corrode metal
components.
• Install your appliance close to its DC power source.
• Avoid using electrical extension leads and RS232 more than 3m long.
Technical Manual
Page 4 of 15
www.technofase.com
• TECHNOFASE cannot be held responsible for damage due to inappropriate installation or operation of the
appliances.
• Do not replace the electrical components or attempt to repair products of the RDM BK86 series in any
way.
• The products of the RDM BK86 series must be used in accordance with the relevant local and national
standards in force.
Supplementary notes for RADIO interface appliances
The products with radio interface have been designed to operate on UHF radio frequencies (869MHz) that
vary from one country to another. The user must take care to check the standards in force in the country in
which the appliance is being used before putting it into use.
Contact the local Ofcom (Office of Communications) agency to obtain a licence or further information
concerning the limitations on the free, unrestricted use (SRD) of the appliance.
Technical Manual
Page 5 of 15
www.technofase.com
2. Introduction
The RDM BK86 system has been developed for transmitting and receiving data via radio.
The special features of the RDM BK86 system are the following:
• Considerable immunity to disturbances
• Compact size
• IP65 aluminium / fiberglass casting
• Easily accessible RS232 communication port
• Up to 6 programmable channels (selected with software)
• Power supply 5 or 8-12VDC
• Integral internal built-in antenna
2.1 Environmental characteristics
• Operating temperature -20 / 50 °C
• Storage temperature -25 / 50 °C
• Relative humidity 5-85%, without condensation
• Vibration resistance
Technical Manual
Page 6 of 15
www.technofase.com
3. Compliance with Standard
The system complies with the following harmonised standards:
• EN 60950 Electrical safety
• EN 301-489-1 + EN 301-489-5 Radio appliances
• EN 300-220-1 + EN 300-220-3 ISM Band SRD
3.1 Reference Standard
The RDM BK86 transceiver complies with the following European standards:
EN 300 220, EN 301 489.
Furthermore, the product has been tested according to standard EN 60950.
Notified Body CE 0477.
Technical Manual
Page 7 of 15
www.technofase.com
3.2 CEPT 70-03 Recommendation
The RDM BK86 product operates on a harmonised frequency band and therefore, to comply with the
standard in force, it must be used, on the time scale, for 10% max. of an hourly duty cycle (corresponding
to 6 minutes of use per hour).
NOTE: In view of the construction system, the user is responsible for compliance with this parameter.
3.3 Identification
The product is identified by the product identification number and a seven-digit number (representing the
series number and year of manufacture) on the casing.
Technical Manual
Page 8 of 15
www.technofase.com
4. Technical data
Make
Model
Channels
Max. RF power
Frequency stability
Power supply
Operating temperature
Sizes (cylindrical)
TECHNOFASE
BK86-XX
Selectable, up to 9
500mW ERP
+/- 1 KHz
5-12V DC
-20 / 50 °C
290 x 40 mm
4.1 Models available
The models vary according to the frequency band and the antenna power
RDM BK86 Mod. 5A
869.4125 - 869.6375MHz
500mW ERP
1)
This model can used in the EU region. Contact the local department of the Office of
Communications for further information concerning its use and the limitation.
4.2 Standard radio channels
CH 1
CH 2
CH 3
CH 4
CH 5
CH 6
CH 7
CH 8
CH 9
BK86-5A 25KHz
869.4125 MHz
869.4375 MHz
869.4625 MHz
869.4875 MHz
869.5125 MHz
869.5375 MHz
869.5625 MHz
869.5875 MHz
869.6125 MHz
Technical Manual
Page 9 of 15
1
www.technofase.com
4.3 Communication interfaces
RS232
RS232 standard interface
Mini DIN 6 F type connection
4.4 Power supply
The RDM BK86 transceiver must be run on a very low safety voltage supply protected against short
circuits.
Supply voltage:
Maximum absorption in Tx:
Protection against short circuits:
Type:
5 or 8-12V
400 mA
External
Fast Fuse 400mA or electronic
4.5 Connections
For external connections, a screened cable with a MINIDIN 6 type connector has been provided
both for data and for the power supply. All electrical connections are designed for lengths up to a
max. of 3m.
Technical Manual
Page 10 of 15
www.technofase.com
5. Assembly specifications
5.1 External assembly
External assembly can be carried out using a support plate with a 24 mm hole in the centre. This
plate must then be fixed to a suitable means of support.
5.2 Assembly inside an electrical panel
For assembly inside an electrical panel, a hole 24 mm in
diameter must be drilled to allow the antenna to
transmit and receive outside. The earthing surface must
be at least 10cm x 10cm in size.
Technical Manual
Page 11 of 15
www.technofase.com
8. Product guarantee
8.1 Terms of the guarantee
8.1.1 GUARANTEE AND CONDITIONS
Technofase products are covered by a 1 (ONE) YEAR guarantee from the date of purchase with the
exception of the batteries which are covered by a 6 (SIX) MONTH guarantee. During this period Technofase
undertakes, at its sole discretion, to repair or replace faulty components with similar or equivalent
products or to refund the Customer for the amount paid for the component in the case of faulty material
or manufacturing defects. If the label with the series number of a product has been cancelled, tampered
with, or partially or completely covered, Technofase reserves the right not to consider such a product
under guarantee. The guarantee covers manufacturing faults in the components at the time of purchase
and the labour necessary to repair them.
The guarantee is null and void in the event of: improper use of the product, negligence, intentional damage
or any problem due to incorrect installation after purchase. The guarantee is of the “on-centre” type, i.e.
the customer is only liable for paying the cost of dispatching the faulty product to the repair shop.
8.1.2 DURATION OF THE GUARANTEE FOLLOWING SERVICES UNDER THE GUARANTEE
Any service carried out under the guarantee will not prolong the duration of the guarantee.
8.1.3 RESPONSIBILITY TOWARDS THIRD PARTIES
The buyer will not hold Technofase responsible with regard to any controversy that may arise with the final
user as the buyer undertakes to check in advance the appropriateness of the system configuration and of
every single component he has purchased. It is expressly understood that Technofase is responsible only
towards the first buyer and exclusively within the terms provided for by the guarantee clause.
Technical Manual
Page 12 of 15
www.technofase.com
9.1 Standard concerning disposal
EC-Directive 2002/96 Waste electrical and electronic appliances – RAEE.
This product complies with EU Directive 2002/96/EC.
The symbol of the crossed litter bin appearing on the appliance indicates that at the end of
its useful life the product must be disposed of separately from household waste. The user is
responsible for taking the appliance to a suitable collection point at the end of its life.
Separate waste collection and subsequent recycling, processing and the eco-friendly disposal of exhausted
appliances contribute towards preventing negative effects on the environment and on health and help to
recycle the materials of which the product is made. Contact the local waste disposal service or the shop in
which the product was purchased for more detailed information concerning the collection systems
available.
Technical Manual
Page 13 of 15
www.technofase.com
DICHIARAZIONE DI CONFORMITÀ
DECLARATION OF CONFORMITY
TECHNOFASE SRL
VIA GALVANI 23
39100 BOLZANO
ITALY
Il sottoscritto dichiara sotto la propria responsabilità che il prodotto:
Hereby declare under its sole responsibility that the products:
Prodotto:
Product:
RDM
Modello:
Model :
BK86-5A
è conforme a tutte le norme tecniche relative al prodotto entro il campo di applicabilità
delle Direttive Comunitarie 99/5/CEE, 2006/95/CE:
satisfies all the technical regulations applicable to the product within the scope of Council
Directives 99/5/EC and 2006/95/CE:
ETSI EN 301 489-1 (V.1.6.1 2005) + ETSI EN 301 489-5 (V. 1.3.1 2002)
ETSI EN 300 220-2 (V.2.3.1 2010)
EN 60950-1 (2001) + EN 60950-1/A11 (2004)
Sono state eseguite tutte le necessarie prove di radiofrequenza.
All essential radio test suites have been carried out.
Notified Body 0477
Questa dichiarazione viene emessa sotto la sola responsabilità del costruttore e, se applicabile, del suo
rappresentante autorizzato
This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised
representative.
(Luogo, data di emissione)
(Firma)
(Place, date of issue)
(Segnature)
BOLZANO, 15.08.2013
Doc: Dichiarazione di conformita RDM BK86
Release of 15.08.2013
Technical Manual
OSTI PIETRO
GENERAL MANAGING DIRECTOR
Page 14 of 15
www.technofase.com
Manufacturer
RDM BK86 is made by:
TECHNOFASE
Via GALVANI 23
39100 BOLZANO
Tel 0471500450
Fax 0471513944
[email protected]
THE TERMS AND CONDITIONS IN THIS DOCUMENT MAY BE CHANGED WITHOUT PRIOR NOTICE.
Technical Manual
Page 15 of 15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement