Instruction Manual

Instruction Manual
Instruction Manual
Wireless Audio Adapter with Bluetooth® for
USB Connectors
At a Glance
Status Indicator
Plug cap
USB plug
Status indicator light
Page 2
Flashing light
Ready to be paired
Quickly flashing
Searching for a connection
Slowly flashing
Naxa Electronics
Getting Started
Add wireless Bluetooth® technology to any
device that can play music from USB memory
drives! Simply 1) connect the NAB-4003
adapter to the USB port, and then 2) pair the
adapter with your Bluetooth device.
2) Remove the USB plug cap [1] and plug
the NAB-4003 into the USB port of the
sound system. The adapter will turn on
automatically and the status indicator
[3] will flash. A tone will sound when the
unit has been recognized.
The NAB-4003 can connect to sound systems
with a USB port designed for music playback.
Simply plug it into the USB port, and then set the
sound system to USB mode.
1) Set the sound system to USB mode. (Refer to the manual of your speaker system
for instructions.)
Page 3
Before using a wireless player with Bluetooth®,
you will need to establish a connection between
it and your Naxa device. This process is called
“pairing” and you will only have to do it once.
Once two devices are paired, they will automatically connect when they detect each other.
Wireless players with Bluetooth may include
laptops, tablets, smartphones, and more. Make
sure that your player has its Bluetooth radio
enabled and that it is set to be discoverable.
After you have connected the NAB-4003:
1) The NAB-4003 will turn on automatically. The Status indicator [3] will flash
quickly (searching) and then slow to a
steady rate (ready to be paired).
Page 4
2) To pair, use your Bluetooth® device to:
a) search for the NAB-4003, and then b)
select the NAB-4003 to pair with it.
If your device
requires a
enter “0000”.
Refer to the
user’s manual
of your device
for specific
for pairing
and connecting Bluetooth devices.
3) Start playback on your device to start
enjoy wireless music streaming!
Naxa Electronics
Stream Audio to
a Computer
2) The NAB-4003 contains 6 audio files. There
are 3 “MP3” files and 3 “WAV” files.
The NAB-4003 can also stream audio wirelessly to a computer. Simply plug the NAB4003 into a powered USB port and pair as
usual. Then:
1) Your computer will recognize the NAB4003 as a Removable Disk. Click on the
NAB-4003 disk to browse its contents.
3) Double-click
one of the files
to start playing it on your
4) Start audio
playback on
your Bluetooth®
Page 5
If you have problems with your device, please consult the instructions in this manual. Please
also visit us on the web at to get up to the minute news, alerts, and documentation for your device. For additional assistance, please contact Naxa Technical Support.
NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
Page 6
Naxa Electronics
Page 7
Naxa Electronics
2320 E 49th St
Vernon, CA 90058
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF