Open the Instruction Manual
ProAction – Dishwasher
Installation & User Instructions – Please keep for future reference
233/7496
Important – Please read these instructions fully before installing or using
These instructions contain important information which will help you get the best from your
appliance and ensure safe and correct installation, use and maintenance.
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 600 4632
Issue 0 – 05/05/14
Contents
Safety Information
2-3
Parts
4
Installation
Water supply connection
Drain hose connection
Position the appliance
Water pressure
Electrical connection
5-7
5
5
5
6
7
User Instructions
Before first use
Water softener
Rinsing aid
Detergent
Loading your appliance
Wash cycle table
Using your appliance
8-16
8-10
8
9
10
11
14
15
Care and Maintenance
Filtering system
General
16
16
16
Trouble Shooting
Error codes
17
17
Technical Data Sheet
Disposal information
18
19
1
Guarantee
20
1
Product codes
PRSL96W WHITE
Safety Information
Important – Please read these instructions fully before installation
Before use
The installation of this appliance is best carried out
by 2 people.
y Dispose of all packaging carefully and
responsibly.
y The appliance is designed for indoor use only
and must be protected from rain, moisture and
extreme temperature variations.
y This appliance is designed for household use.
Do not use the appliance for industrial and
commercial use, or any other purpose.
y The appliance MUST be positioned on a firm
level base.
y Do not place the appliance near a heat source or
in direct sunlight.
y Only suitable household utensils should be
placed in the dishwasher. Avoid utensils that are
non-heat-resistant, metal decorated, etc.
y Do not use detergent not designed for
dishwasher. This may damage the appliance.
y Do not spray water on the appliance. It may
cause electrical parts failure or electric shock.
y Do not stand or sit on the door when it is open. It
may cause deformation or failure of your
dishwasher. The appliance could tip forward.
y Do not put any heavy objects on top of the
appliance. It will damage the appliance.
y This appliance is fitted with a safety function that
automatically stops the operation of the
dishwasher when it is exposed to heavy
disturbance on its mains.
y The appliance is to be connected to the water
supply using new hose set and that old hose set
should not be used.
y The door should not be left in open position since
this could present a tripping hazard.
During use
y This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
y This appliance is not intended for use by young
children or infirm persons unless they have been
adequately supervised by a responsible person to
ensure that they can use the appliance safely.
Young children should be supervised to ensure
that they do not play with the appliance.
y Do not touch the visual heating element during or
immediately after use.
y Do not operate your dishwasher unless all enclosure
panels are properly in place. Open the door carefully
if the dishwasher is operating, there is a risk of water
squirting out.
y WARNING: Knives and other utensils with sharp
points must be loaded in basket with their points
down or placed in a horizontal position. Avoid
damage to the door seal.
y Load plastic items so that they do not come into
contact with the visible heating element.
y Dishwasher detergents are strongly alkaline, they
can be extremely dangerous if swallowed. Avoid
contact with skin and eyes and keep children
away from the dishwasher when the door is open.
y The door should not be left open, since this could
increase the risk of tripping.
y Keep detergents away from children.
y Do not attempt to repair the appliance yourself.
Contact the Customer Helpline: 0345 600 4632.
y This appliance must be positioned so that the
plug is accessible.
y This appliance is intended to be used in household
and similar applications such as:
-staff kitchen areas in shops, offices and other
working environments;
-farm houses;
-by clients in hotels, motels and other residential
type environments;
-bed and breakfast type environments.
2
Safety Information
Important – Please read these instructions fully before installation
y This appliance is intended to be used in household
and similar applications such as:
-staff kitchen areas in shops, offices and other working
environments;
-farm houses;
-by clients in hotels, motels and other residential type
environments;
-bed and breakfast type environments.
y This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
y To protect against the risk of electrical shock, do not
immerse the unit, cord or plug in water or other liquid.
y Please unplug before cleaning and maintenance the
appliance.
y Use a soft cloth moisten with mild soap, and then use a dry
cloth to wipe it again.
y If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
3
Part
If you have damaged or missing parts,
call the Customer Helpline: 0345 600 4632
Please familiarize yourself with the parts and accessories listed below
6
4
1.Power indicator light and switch
2.Delay indicator
3.Delayed Start Button
4.Running indicator light
5.All in 1 function button and indicator light
6.Salt and rinse aid warning lights
7.Washing Program Selector
8.Start and reset button
ECO
1
2
7
3 5
1. Upper basket
2. Spray arms
3. Lower basket
4. Salt container
5. Main filter
6. Detergent dispenser
8
7. Cup shelf
8. Cutlery basket
9. Coarse basket
10. Rinse aid dispenser
11. Drain pipe connector
12. Inlet pipe connector
Accessories included
Instructions x 1
Hose x 1
Salt Filler x 1
Measuring Spoon x 1
Measuring Cup x 1
Inlet Hose x 1
4
Installation
Water supply connection
Caution: 2 people are required to
unpack and handle the appliance, it is
recommended that gloves are worn.
y Carefully remove all packaging materials
including the foam base, dispose of correctly.
y Connect the cold water supply hose to a
threaded ¾” connector and make sure that it is
fastened tightly in place.
y If the water pipes are new or have not been
used for an extended period of time, let the
water run to make sure that the water is clear.
This will prevent the water inlet to be blocked
and damage the appliance.
WARNING:
Please close the hydrant after using.
Drain hose connection
1. Make a hooked end at the end of drain hose
with the plastic U-bend fitting (provided). The
hooked end should be dropped into a
drainage standpipe between 40cm and
100cm from the floor level.
2. The free end of the hose must not be
immersed in water to avoid the flow back.
3. You may connect the water inlet hose onto
the kitchen sink tap. You must obtain a
correct adaptor to match the inlet hose
connector for a secure connection. However,
permanent plumbing is recommended.
4. If leakage is observed, immediately shut off
the water supply and check the hose
connections fully. Tighten connections if
necessary.
Position the appliance
1. The dishwasher must be installed on a solid
level surface.
2. Position the appliance in the desired location.
The back should rest against the wall behind
it, and the sides along the adjacent cabinets
or wall. The water supply and drain hoses
can be positioned either to the left or right
side to facilitate proper installation.
3. To level the dishwasher, adjust the 4 level
screws (feet) under the dishwasher.
5
Installation
Water pressure
For best operating results, incoming water
pressure should be between 0.04 and 1 Mpa.
Your dishwasher cleans by spraying a mixture of
hot clean water and detergent (under pressure)
against the soiled surface of dishes. The water
is pumped through a rotating spray arm, drained
through a filter removing food and soiled
particles and pumped back through the spray
arm.
Note: Hard water conditions will adversely affect
the performance of your dishwasher. To
minimise this condition, it is recommended to
periodically operate/rinse the dishwasher in
empty condition using 1 cup of white vinegar (at
least once a week).
Important: Once you open the water
supply (even if it is closed immediately
thereafter), the water inlet hose will be
pressurised.
6
Installation
Electrical connection
Any electrical work that is required to
install this appliance MUST be carried out by
a qualified electrician.
Warning:
THIS APPLIANCE MUST
BE EARTHED
Before making any electrical connections,
ensure that:
y Electrical safety is only guaranteed when the
earth system of your house is in accordance
with the related local regulations.
y Do not bend, stretch or pull the supply cable to
avoid electric shock.
y Ensure the power socket is suitable for the
maximum power of the appliance (fuses in the
power circuit must be 13 amp).
y The supply voltage should be the same as that
indicated in the technical specifications and
the appliance rating plate.
y The appliance should be earthed and in
compliance with the applicable law.
y When installed, the power socket must be
within easy reach.
y If the socket outlets in your home are not
suitable for the plug supplied with this unit
check with a qualified electrician for
replacement.
y The use of adapters, multiple connectors or
extension cables are not recommended.
y The appliance must be connected to a 220240 volt 50Hz AC supply by means of a three
pin socket, suitably earthed and protected by a
13 amp fuse.
y Should the fuse need to be replaced, a 13
amp fuse approved to BS1362 must be used.
y The plug contains a removable fuse cover that
must be refitted when the fuse is replaced. If
the fuse cover is lost or damaged, the plug
must not be used until a replacement cover
has been fitted or the plug is replaced.
y A damaged plug should be cut off as close to
the plug body as possible, the fuse should be
removed and the plug disposed of safely.
7
Plug replacement (UK & Ireland only)
Should you need to replace the plug; the wires in
the power cable are coloured in the following
way:
Blue – Neutral ‘N’
Brown – Live ‘L’
Green & Yellow – Earth ‘E’
As the colours of the wires in the power cable
may not correspond with the coloured markings
identifying the terminals in your plug, and
proceed as follows:
The green & yellow wire must be connected to
the terminal in the plug that is marked with the
letter E or by the earth symbol.
The blue wire must be connected to the terminal
that is marked with the letter N.
The brown wire must be connected to the
terminal that is marked with the letter L.
If power supply cord is damaged, it must
replaced by the manufacturer or its service
agent or a similar qualified person in order to
avoid a hazard.
User Instructions
Before first use
Before using your appliance for the first time:
y Set the water softener
y Add 1.5Kg dishwasher salt and then full fill
the salt container with water
y Fill the rinse aid dispenser
y Fill in detergent
Water Softener
The dishwasher is designed with a softener to
eliminate the minerals and lime from the water
supply. The hardness of the water supply varies
from place to place and will affect the
dishwasher performance. The amount of salt
consumed can be adjusted based on the
hardness of the water used. This is intended to
optimise and customize the level of salt
consumption.
Adjusting salt consumption
1.Unscrew and remove the cap from the salt
container.
2.There is a ring on the container with an arrow.
Rotate the ring in anticlockwise direction from
“-“ sign towards “+” sign, based on the table at
right.
Water
hardness
(°
Clarke)
Selector
position
Salt
consumption
(gram/cycle)
Autonomy
(cycle/
1kg)
0 ~ 10
10 ~ 28
28 ~ 56
56 ~ 75
/
Mid
+
0
20
40
60
/
50
25
16
Loading the salt into softener
1. Remove the lower basket and then unscrew
and remove the cap from the salt container.
(Fig 1)
2. Place the end of the funnel(supplied) into the
hole and introduce about 1.5kg of dishwasher
salt.
3. Full fill the salt container with water.It is normal
for a small amount of water to come out of the
salt container. (Fig 2)
4. Screw the cap tightly back clockwise.
5. Immediately after filling the salt, a washing
cycle should be started (soak or rapid
program suggested). Otherwise the filter
system or pump may be damaged by salty
water.
Important:
y Only use dishwasher salt
y Add the salt again when the salt warning light
at control panel is on.
y It takes time to dissolve the salt so the salt
warning light may still come on even the salt
container is filled.
8
User Instructions
Before first use
Rinsing Aid
A rinsing aid is specially formulated to rinse
away food and detergent residues that can be
left behind on your dishes. Use regularly, a
rinse aid will automatically provide you with
cleaner dishes every time you wash.
Loading the rinsing aid
1. Turn the dispenser cap to ‘open’ arrow and lift
it out.
2. Fill the rinsing aid slowly into the container
until it just reaches the bottom of the filling
cap
3. Replace the cap by turning to ‘close’ arrow.
There is a rinse-aid indicator on the dispenser
Full
3/4 Full
1/2 Full
1/4 Full – Require refill
Empty – Require refill
Adjusting rinsing aid dispenser
The rinse aid dispenser has six scales. Always
start with the dispenser set on "4". If spots and
poor drying is a problem, increase the amount of
rinse aid dispensed by removing the dispenser
lid and rotating the dial to "5". You could adjust
the dial to the next higher lever until your dishes
are spot-free.
Note:
Increase the dose if there are drops of water or
lime spots on the dishes after wash. Reduce the
dose if there are sticky whitish stains on your
dishes or a bluish film on glassware or knife
blades.
9
User Instructions
Before first use
Detergent
Use only detergent specifically made for use in
dishwashers, as other types may damage the
dishwasher.
The dispenser must be filled before the start of
each wash cycle following the instructions
provided in the wash cycle table. Your
dishwasher uses less detergent and rinse aid
than conventional dishwasher. Generally, only
one tablespoon of detergent is sufficient for a
normal wash load. Heavily soiled items need
more detergent. Always add the detergent just
before the start of the dishwasher, otherwise it
could get damp and will not dissolve properly.
Loading the detergent
1.The detergent dispenser (recessed area)
located at the inside of the door.
2.Open the lid by pressing the release button.
3.Pour the detergent. The marking indicates the
dosing levels:
A – Detergent for main wash cycle. ‘MIN’
means approximately 20g of detergent.
B – Detergent for pre-wash cycle,
approximately 5g of detergent.
4.Close the lid until it locks in place.
Note: follow the detergent
manufacturer’s guidelines.
Dishwasher detergent is
corrosive! Keep it out of
reach of children.
Use of “2 in 1”, “3 in 1”, “4 in 1” and “5 in 1”
detergents
These products are detergents with integrated
detergent, rinse aid and salt functions. Before
using these products you should first check that
the water hardness in your supply is compatible
with the use of these products as per the
detergent manufacturers (packaging). These
products should be strictly used according to the
detergent manufacturer's instructions. In general
detergents that include rinse aid or water
softener are only able to serve good results
under certain conditions - rinse aid and water
softener cannot adapted to specific conditions.
For this reasons in some cases there might be
unwanted cleaning or drying results.
If you encounter problems when using these
products please contact the detergent
manufacturers care line. The manufacturer of
your dishwasher is not liable for damages
caused by compact detergents nor gives
warranty if you use compact detergents.
10
User Instructions
Loading your dishwasher
Preparing your dishes prior washing
y Scrape off all food residuals from the dishes.
y Remove excessive quantities of oil or grease.
y Empty any liquids from glasses and cups.
y Dishes with dried-on foods are more difficult to
wash and may not come clean in a normal
wash cycle.
y Arrange all items with recessed or curved
sections on a slant to drain water away.
y Cups, pots and glasses etc should be placed
upside down.
Loading the upper basket
The upper basket is designed to hold more
delicate and lighter dishware such as glasses,
coffee and tea cup and saucers, plates, small
bowls and shallow pans (as long as they are not
too dirty). Position the dishes and cookware so
that they do not get moved by the spray of water.
Adjusting the upper basket
The height of the upper basket can be adjusted
in order to create more space for large utensils
both for the upper/lower basket. The height of
the upper basket can be adjusted by placing the
wheels on different height of the rails. Long
items, serving cutlery, salad servers and knives
should be placed on the shelf so that they
do not obstruct the rotation of the spray arms.
The shelf can be folded back or removed when
not in use
11
User Instructions
Loading your dishwasher
Loading the lower basket
y Put large items which are most difficult to
clean into the lower basket.
y Locate sharp items so that they are not likely
to damage the door seal.
y Load sharp knives with the handles up to
reduce the risk of injuries.
y Do not load plastic items unless they are
marked "dishwasher safe" or the equivalent.
y Do not load glasses over the dish rack pins.
Glasses loaded over dish rack pins are not
properly supported and are likely to get
damaged.
y Items with wooden or bone handles and items
joined together with glue are unsuitable as
they cannot resist hot water.
Folding spikes
For better stacking of pots and pans, the spikes
can be folded down as shown in right.
Cutlery basket
Cutlery should be placed in the cutlery basket
with the handles at the bottom. If the rack has
side baskets, the spoons should be loaded
separately into the appropriate slots, especially
long utensils should be placed in horizontal
position at the front of the upper basket as
shown.
1. Tea spoons
2. Dessert spoons
3. Soup spoons
4. Forks
5. Knives
6. Serving forks
7. Serving spoons
12
User Instructions
Loading your dishwasher
NOTE: For ease of loading/unloading large size dinner plates from the dish rack it may be necessary to
remove the cutlery basket. When loading/unloading is complete, return the cutlery basket to its original
position.
Warning
y Do not touch the heating element during or immediately after use.
y Do not tamper with controls.
y Do not abuse, sit or stand on the open door or dish-rack of the dishwasher. The machine may topple
over.
y Protect cables and hoses from high temperatures.
y To reduce the risk of injury, do not allow children to operate or play with the dishwasher.
13
User Instructions
Wash cycle table
Program
Cycle Selection
Information
For heaviest soiled crockery,
and normally soiled pots
Intensive pans dishes etc with dried
on soiling
Description
of Cycle
Pre-wash(50 )
Wash (65 )
Rinse
Rinse
Rinse (55 )
Drying
Detergent Running
pre/main time(min)
Energy
(Kwh)
Water
(L)
4/23g
(Or All in1)
120
1.13
16.0
4/23g
(Or All in1)
155
1.09
13.0
4/23g
(Or All in1)
160
0.77
10.5
Normal
For normally soiled loads,
such as pots plates glasses
and lightly soiled pans.
Pre-wash(50
Wash (55 )
Rinse
Rinse(65 )
Drying
ECO
This is standard programme, it
is suitable to clean normally
soiled tableware and it is the
most efficient programme in
terms of its combined energy
and water consumption f or
t hat type of tableware.
pre-wash
Wash (50
Rinse (60
Drying
For lightly soiled crockery
and glass
Pre-wash
Wash (40 )
Rinse
Rinse (60 )
Drying
15 g.
95
0.71
13.0
For lightly soiled loads that do
not need excellent drying
efficiency.
Wash(60 )
Rinse
Rinse (50 )
Drying
27g
(Or All in1)
60
0.77
10.0
A shorter wash for lightly
soiled loads and quick wash
Wash (40
Rinse
Rinse (40
15 g.
30
0.50
9.0
(*EN5 0242)
Glass
1 hour
express
Rapid
)
)
Rinse
Aid
)
)
)
14
User Instructions
Using your appliance
To operate the dishwasher:
1. Make sure the water inlet and drain hoses are correctly and securely connected.
2. Push the door release button to open the door.
3. Fill the detergent, water softener and rinsing aid to the dishwasher.
4. Draw out the lower and upper basket. Load the dishes on the dish rack and cutlery inside the cutlery
basket. Make sure that the rotating spray arm can turn freely all the way round. If necessary remove
any obstacles.
5. Close the door firmly. Open the water supply.
6. Press the ON/OFF button, and the ON/OFF light will turn on. Turn the program knob to select a
desired wash cycle, press the Start/Reset button, the machine will work after 3 seconds.
7. The dishwasher is designed to stop if the door is opened accidentally during operation.
8. The dishwasher stops automatically at the end of the program. You will hear 8 sec. buzzer sound. The
power pilot light will remain illuminated until the power is switched off.
9. After washing, dishes should be allowed to cool down for about 15 minutes as they are hot to handle.
Dishes will cool quicker if the door is opened slightly.
10. Empty the lower basket first and then the upper one. This will avoid water dripping from the upper
basket onto the dishes in the lower one.
11. After unloading the dishes, remove and clean the filter and return to its position.
Note: This is normal when you noted small amount of water being pumped-out from the drain hose prior
to the start of a wash cycle. This is because the pump retains a small amount of water from the previous
cycle.
Program Selection Change
You can modify the washing program when the dishwasher just runs for a short time. Otherwise, the
detergent may have already been released, and the appliance may have already drained the wash water.
If this is the case, the detergent dispenser must be refilled.
When you press the start/reset button more than 3 seconds, you can cancel the running
programme and select other programmes .
When you select Intensive/Normal/Eco.Programmes, you can select the All in1 function.
The Display window shows the state of the dishwasher:
a) Running indicator light is off ----------------------------------> stand by;
b) Running indicator light is on and not blinking -----------> pause;
c) Running indicator light is on and blinking ------------------> run.
Note:If you open the door during a wash cycle, the machine will pause. The running indicator
light will stop blinking and the buzzer will mooing every minute unless you close the door.
After you close the door, the machine will keep on working after 10 seconds.
Delay function
After selecting the wash cycle program, you can set the desired delay start time by pressing the delay
button. You can select 3h/6h/9h from the program. The dishwasher will start operation after the selected
delay time is elapsed.
15
Care and Maintenance
General
Important: Always unplug the appliance from the power socket during cleaning and
maintenance.
y Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax
polish for cleaning.
y Clean the external surfaces with a damp soft cloth only. Never use abrasive products or solvents as it
may damage the dishwasher.
y One of the factors that cause odour is the food that remains trapped in the seals. Periodic clean the
seal with a damp sponge will prevent this from occurring.
The filter system consists of a main filter, coarse filter and fine filter.
y Main filter (1) - Food and soil particles trapped in this filter are
pulverized by a special jet on the lower spray arm and washed down
the drain.
y Coarse filter (2) - Larger items such as pieces of bones that could
clog the drain are trapped in the coarse filter. To remove an item
caught in this filter, gently squeeze the taps on the top of this filter
and lift it out.
y Fine filter (3) - This filter holds soil and food residues in the sump
area and prevents it from being re-deposit on the dishes during a
cycle.
Cleaning the filter
1. Remove the filter from the bottom.
2. Clean the filter thoroughly under the running water tap.
3. Return the filter to its position
Warning: Under no circumstances may the dishwasher be used without filters.
Cleaning the spray arms
It is necessary to clean the spray arms regularly as hard water
chemicals will clog the spray arm jets and bearings.
1. Remove the upper spray arm by screw off the nut clockwise and then
remove the arm.
2. Remove the lower spray arm by pulling out the spray arm upward.
3. Wash the arms in soapy and warm water and use a soft brush to
clean the jets.
4. Replace them after rinsing them thoroughly.
Not use for long period
If you are not using the dishwasher for a long period of time it is recommended to remove the plug, turn
off the water supply and leave the door ajar to prevent odors from forming within the dishwasher.
Moving the dishwasher
If you need to move the dishwasher, try to keep it in vertical position. Avoid over tilting during the
transportation.
16
Trouble Shooting
In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below. If
the problem persists, contact the retailer if the machine is still under guarantee. If the machine is out of
guarantee, contact an approved service agent on 0345 600 4632.
Problem
Possible cause
Solution
Dishwasher does not
start
y The mains plug is not plugged in.
y Door is not closed.
y Water supply is not turned on.
y Insert the mains plug.
y Close the door.
y Turn on the water supply.
Dishwasher does not
load water
y Low water supply pressure.
y The water supply hose is crimped or
bent.
y Filter is clogged.
y Check the water pressure.
y Ensure the hose is not crimped or
bent.
y Clean the filter.
Dishes not clean
y Improper or over loading.
y Spray arm not rotating freely.
y Not enough detergent and/or
improper detergent is used.
y Improperly prepared dishes.
y Arrange dishes so spray action
reaches all surfaces. Do not
overload the dishwasher.
y Make sure nothing (i.e. cutlery) is
obstructing spray arm rotation.
y Use proper dishwasher detergent.
y Remove excessive food and liquids
from dishes before loading.
Dishwasher does not
drain
y The drain hose is crimped or bent.
y Ensure the hose is not crimped or
bent.
Noise
y Spray arm is knocking against an item
in basket.
y Items of crockery are loose in the
wash cabinet.
y Interrupt the program and re-arrange
the items which are obstructing the
spray arm.
y Interrupt the program and re-arrange
the items of crockery.
Unsatisfactory drying
result
y Improper loading.
y Too little rinse aid.
y Load as suggested in instructions.
y Increase the rinse aid amount or
refill the rinse aid dispenser.
y Do not empty the dishwasher
immediately after wash.
y Washing temperature is lower in
short program. Choose a program
with a long washing time.
y Dishes are removed too soon.
y Wrong program has been selected.
Error codes
Description
Possible causes
The All in 1 function indicator
light flickers fleetly
y Longer inlet time
y Faucet is not opened, water intake is
restricted or water pressure is too
low.
The Running indicator light
flickers fleetly
y Overflow
y Some element of dishwasher leaks.
Warning:
- If overflow occurs, turn off the water supply before contacting the customer helpline.
- If there is water in the base pan because of overfill or small leak, the water should be removed before
restarting the dishwasher.
17
Technical specifications (according to EU Directive 1059/2010)
Brand
PROACTION
Model
PRSL96W
Capacity
9 settings
Energy efficiency class
A+
Annual energy consumption
222 kWh
Energy consumption of the standard cleaning cycle
0.77 kWh
Power consumption of off-mode / left-on mode
0 W / 0.4 W
Annual water consumption
2940 litre
Drying efficiency class
A
Standard cleaning cycle
ECO 50
Program time for the standard cleaning cycle
160 min
Noise level
52 dB(A) re 1 pW
Free standing / Built-in
Free standing
Dimension
W450 X D580 X H850mm
Power consumption
1760-2100 W
Rated voltage
220-240 V~ 50 Hz
Water pressure (flow pressure)
0.04-1 M P a
NOTE:
A + + + (most efficiency) to D (least efficiency)
Energy consumption “2 22” kWh per year, based on 280 standard cleaning cycles using cold water fill and
the consumption of the low power modes. Actual energy consumption will depend on how the appliance is used.
Water consumption “2940” litres per year, based on 280 standard cleaning cycles. Actual water consumption
will depend on how the appliance is used.
A (most efficiency) to G (least efficiency)
This program is suitable for cleaning normally soiled tableware, and that it is the
most efficient programme in terms of its combined energy and water consumption for
that type of tableware.
The above values have been measured in accordance with standards under specified operating conditions.
Results may vary greatly according to quantity and pollution of the dishes, water hardness,
amount of detergent, etc.
We apologise for any inconvenience caused by any minor inconsistencies in these instructions, which may
occur as a result of product improvements and development.
18
This appliance complies with the following EEC directives:
2006/95/EEC Low voltage directive
2004/108/EEC EMC directive
2009/125/EC ERP directive
Disposal information
The symbol on the product or its packaging indicates that this product may not be treated as
household waste. Instead it should be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling this product, please contact your local
council office, your household waste disposal service or the shop where the product was
purchased.
19
Guarantee
PRODUCT GUARANTEE
This product is guaranteed against manufacturing defects for a period of
Year
This product is guaranteed for twelve months from the date of original purchase.
Any defect that arises due to faulty materials or workmanship will either be replaced,
refunded or repaired free of charge where possible during this period by the dealer from
whom you purchased the unit.
The guarantee is subject to the following provisions:
y The guarantee does not cover accidental damage, misuse, cabinet parts, knobs or
consumable items.
y The product must be correctly installed and operated in accordance with the instructions
contained in this manual.
y It must be used solely for domestic purpose.
y The guarantee will be rendered invalided if the product is re-sold or has been damaged by
inexpert repair.
y Specifications are subject to change without notice.
y The manufacturer disclaims any liability for the incidental or consequential damages.
y The guarantee is in addition to, and does not diminish your statutory or legal rights.
y In the event of a problem with the product within the guarantee period call the Customer
Helpline on 0345 600 4632.
Guarantor: Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement