For User Manual - Eternal Lighting

For User Manual - Eternal Lighting
Eternal
Lighting
ElitePar™ QUAD
USER MANUAL
Introduction:
You will be so thrilled to know a thinking green LED lighting manufacture has brought to
light the missing link in lighting design for room wall wash lighting to an all new level. That
missing link is in the details throughout our Research and Development phase and road
testing in real world applications. Eternal Lighting made this par fixture unlike any other
fixture on the market today. The impossible before is now a reality. The proprietary
EliteProgramming™ & DMX control on board the ElitePar™ Quad and ElitePar™ Series in part
or in its entirety is the intellectual property (IP) of Eternal Lighting LLC. Licensing for
EliteProgramming™ and more information can be found by contacting Eternal Lighting with
the contact form on our site. The ElitePar™ RGBA and the EliteProgramming™ Series are
trademarks or Eternal Lighting LLC. EliteProgramming™ refers to the identification of the
trademark itself and the functionality.
ElitePar™ QUAD
Features & Technical Specifications:







Professional Entertainment Equipment
ElitePar™ QUAD










(10) Matched 10 Watt QUAD RGBW LEDs
3CH, 4CH, 6CH, 7CH, 8CH, 11CH & 12CH DMX Modes
Sound Active - (3 Different Sound Active Modes)
Sound Active is accessible by DMX or Manual
Auto Mode with Speed Control
Fade mode with Speed Control
Manual Color Mix Mode by Master Slave all other Fixtures change color on
demand
LCD Push Button Display
Power In & Power Out
Master Reset Function
Total Run Hour View
Lux 15,400 at 1 Meter
Eternal Lighting 2.4Ghz Wireless DMX XT Stick™ Ready
Packing Size: 26x16x26 cm
Weight: 7.9 lbs
Power: 100W
Voltage: AC110-240V 50/60Hz
Menu:
Addr:
DMX Address (A000-A512)
ChNd:
Channel Mode 3CH, 4CH, 8CH
SLNd:
Slave/Master Mode (Note: Put in Mast mode when using standalone and
Slav when using DMX)
ShNd:

SOUN: (3 different Sound active modes)
o
S-1 ON (16-100) Color change Color Change, Fade & Strobe
o
S-2 ON (101-175) Color change when hear sound through 15
preset colors and no sound or low sound it will stop on the last
color it was on until it hears sound
o
S-3 ON (176-255) Color change when hear sound & Fade when
no sound or low sound

COLO: AUTO Color change – Press Enter Sp 1 (very slow cycle all 31 preset colors) Sp 8 (very fast cycle all 31 pre-set colors)

Fade: Press enter Sp1=Very Slow – Sp8=fast

Nanu: Color Mixer – Red 0-255, Green 0-255, Blue 0-255, White 0-255
LUX Meter:
When you mix your desired color, press Enter to save the command.
(Note: When using DMX, put all colors back to 255)
NAdL: Master Dimmer for Nanu (color mixer) 0-255 brightness
Test: Press Enter to color change through Red, Green, Blue, White
VE 2.0: This feature displays lifetime run hours
Please visit our website at www.EternalLighting.com to veiw our
warranty statement. Thank you for your purchase!
ElitePar™ QUAD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement