Allen-Bradley Compact Individually Isolated AC/DC Relay Output Module Installation Instructions

Allen-Bradley Compact Individually Isolated AC/DC Relay Output Module is designed for industrial environments and offers reliable switching for your applications. This module features 8 individually isolated relays, capable of handling a variety of loads with up to 2.5A continuous current per point. The module's compact design and easy installation make it ideal for integration with Allen-Bradley's MicroLogix, CompactLogix, and DeviceNet systems.

PDF Download
Document
Allen-Bradley Compact Individually Isolated AC/DC Relay Output Module - Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 8 isolated relays
  • 2.5A continuous current
  • Compact design
  • Easy installation

Frequently asked questions

The maximum continuous current per point is 2.5A. This is stated in the "Output Specifications" section on page 15 of the viewed document.

Yes, this module is suitable for use in Class I, Division 2, Groups A, B, C, D hazardous locations. However, it must be installed in an enclosure and all wiring must comply with N.E.C. article 501-4(b). This information is found under "Hazardous Location Considerations" on page 17 of the viewed document.

The operating voltage range for this module is 5 to 265VAC or 5 to 125VDC. This is mentioned in the "Output Specifications" section on page 15 of the viewed document.
ALP:
Preparing document for printing…
0%