Macintosh PowerBook G3 Series User Manual

Macintosh PowerBook G3 Series User Manual

Macintosh PowerBook
User’s Manual
Includes setup, expansion,
and important health-related information for
Macintosh PowerBook G3 Series computers
K Apple Computer, Inc.
© 1998 Apple Computer, Inc. All rights reserved.
Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple.
The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the
“keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may
constitute trademark infringement and unfair competition in violation of federal and state laws.
Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for
printing or clerical errors.
Apple Computer, Inc.
1 Infinite Loop
Cupertino, CA 95014-2084
408-996-1010
http://www.apple.com
Apple, the Apple logo, AppleTalk, LaserWriter, LocalTalk, Mac, Macintosh, PlainTalk, PowerBook, and StyleWriter are
trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
Other company and product names mentioned herein are trademarks of their respective companies. Mention of
third-party products is for informational purposes only and constitutes neither an endorsement nor a
recommendation. Apple assumes no responsibility with regard to the performance or use of these products.
Simultaneously published in the United States and Canada.
Contents
Communications Regulation Information 7
Laser Information 11
High-Risk Activities Warning 11
1
Setting Up
13
Becoming Familiar With Your Macintosh PowerBook 13
Hardware at a Glance 13
Your Computer’s Components and Controls 14
Your Computer’s Ports and Connectors 16
Setting Up the Computer 18
Your PowerBook Battery 18
Plugging In the Computer 20
Opening the Display 21
Turning the Computer On 22
Problems Turning the Computer On? 23
Adjusting the Internal Display 24
Adjusting the Resolution of the Internal Display 24
Moving Items on the Screen 25
Tips for Using the Trackpad 25
Putting the Computer to Sleep 26
Problems Working With Computer Programs or the Mac OS 27
Turning the Computer Off 28
What’s Next 28
3
2
Using Your PowerBook and Connecting to a Network
Using the Expansion Bays 30
Using Expansion Bay Modules 30
Removing an Expansion Bay Module 31
Inserting an Expansion Bay Module 33
Using a Disc in the CD-ROM or DVD-ROM Drive 34
Ejecting a Disc 36
Power Sources 37
AC Power 37
Main Battery 37
Optional Second Battery 37
Recharging the Battery 38
Monitoring the Battery Charge 38
Using the Battery Level Indicator Lights 39
Responding to Low-Power Messages 39
What You Should Do 39
What You Should Know 39
Maximizing Work Time 40
Removing or Replacing the Battery 41
Using PC Cards 42
Inserting a PC Card 43
Ejecting a PC Card 44
If You Can’t Eject a Card 45
Using a Zoomed Video PC Card 45
Using a PC Card Modem 46
Using the Infrared File Transfer Capability 47
Connecting to a Local Area Network 48
Connecting to a LocalTalk Network 48
Connecting to a 10Base-T Ethernet Network 50
Configuring Your Network Connection 50
4
Contents
29
Using Your PowerBook’s Optional Internal Modem 51
Setting Up Your Modem’s Connections 51
Connecting the Telephone Line to the Modem 51
What Modems Do 53
Software for Your Modem 53
Choosing the Port Setting 54
Modem Tips and Troubleshooting 55
3
Connecting Additional Equipment
57
Connecting a Printer 58
Connecting an External Modem 58
Connecting SCSI Devices 59
Using Your Macintosh PowerBook as a Hard Disk 60
Connecting Your Computer as a Hard Disk 60
Quitting SCSI Disk Mode 62
Using an External Monitor 63
Connecting an External Monitor 64
Trouble With the External Monitor? 66
Disconnecting an External Monitor 66
Using an External Video Display or Recording Device 67
Connecting Video Equipment to Your PowerBook 68
Trouble With the External Video Device? 70
Disconnecting an External Video Device 70
Connecting and Using Sound Input Devices 71
Connecting Sound Output Devices 72
Locking Your Computer 72
Connecting a Mouse, Keyboard, or Other ADB Device 73
Connecting Other Devices 73
4
Installing a RAM Expansion Card and Removing Your Hard Disk
75
Getting Ready 75
Removing the Keyboard and Internal Heat Sink 75
Installing a RAM Expansion Card 79
Removing Your PowerBook Hard Disk Drive 81
Replacing the Keyboard and Internal Heat Sink 83
Contents
5
Appendix
Health, Safety, and Maintenance Tips
85
Health-Related Information About Computer Use 85
Musculoskeletal Discomfort 85
Eye Fatigue 86
Arranging Your Work Area and Equipment 87
Chair 87
Keyboard and Trackpad 87
Mouse 88
Built-In Display 88
External Monitor 88
Avoiding Fatigue 88
What About Electromagnetic Emissions? 88
Important Care and Safety Instructions 89
Caution 90
Important 90
Caring for Batteries 91
Handling Floppy Disks 91
Handling CD and DVD Discs 92
Traveling With the Macintosh PowerBook 92
Airplanes and Airports 93
Handling Your Macintosh PowerBook 93
International Repair and Service 93
Storing the Macintosh PowerBook 93
Service and Support 94
Modem and Fax Safety 94
6
Contents
Communications Regulation Information
FCC Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. See instructions if interference to radio or television reception
is suspected.
Radio and Television Interference
The equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not
installed and used properly—that is, in strict accordance with Apple’s instructions—it may cause interference with
radio and television reception.
This equipment has been tested and found to comply with the limits for a Class B digital device in accordance
with the specifications in Part 15 of FCC rules. These specifications are designed to provide reasonable protection
against such interference in a residential installation. However, there is no guarantee that interference will not
occur in a particular installation.
You can determine whether your computer system is causing interference by turning it off. If the interference
stops, it was probably caused by the computer or one of the peripheral devices.
If your computer system does cause interference to radio or television reception, try to correct the interference
by using one or more of the following measures:
m Turn the television or radio antenna until the interference stops.
m Move the computer to one side or the other of the television or radio.
m Move the computer farther away from the television or radio.
m Plug the computer into an outlet that is on a different circuit from the television or radio. (That is, make
certain the computer and the television or radio are on circuits controlled by different circuit breakers or
fuses.)
If necessary, consult an Apple-authorized service provider or Apple. See the service and support information that
came with your Apple product. Or, consult an experienced radio/television technician for additional suggestions.
Important Changes or modifications to this product not authorized by Apple Computer, Inc., could void the
FCC Certification and negate your authority to operate the product.
This product was tested for FCC compliance under conditions that included the use of Apple peripheral devices
and Apple shielded cables and connectors between system components. It is important that you use Apple
peripheral devices and shielded cables and connectors between system components to reduce the possibility of
causing interference to radios, television sets, and other electronic devices. You can obtain Apple peripheral
devices and the proper shielded cables and connectors through an Apple-authorized dealer. For non-Apple
peripheral devices, contact the manufacturer or dealer for assistance.
Responsible party (contact for FCC matters only): Robert Steinfeld, Apple Computer, Inc., 1 Infinite Loop,
Cupertino, CA 95014-2084, 408-974-2618.
Industry Canada Statement
This Class B device meets all requirements of the Canadian interference-causing equipment regulations.
Cet appareil numérique de la Class B respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
Communications Regulation Information
7
VCCI Class 2 Statement
Notify Your Telephone Company
Some telephone companies require that you notify the local business office when you hook up a modem to their
lines.
Information You Need in the United States
The optional internal modem complies with Part 68 of the FCC rules. On the back of this equipment is a label that
contains, among other information, the FCC registration number and ringer equivalence number (REN). If
requested, provide this information to your telephone company.
m Ringer equivalence number (REN): 0.8–0.9 The REN is useful to determine the quantity of devices you may
connect to your telephone lines and still have all those devices ring when your telephone number is called. In
most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0).
To be certain of the number of devices you may connect to your line, as determined by the REN, you should
contact your local telephone company to determine the maximum REN for your calling area.
m Telephone jack type: USOC, RJ-11 An FCC-compliant telephone cord and modular plug are provided with this
equipment. This equipment is designed to be connected to the telephone network or premises wiring using a
compatible modular jack that complies with Part 68 rules. See the installation instructions for details.
Telephone Line Problems
If your telephone doesn’t work, there may be a problem with your telephone line. Disconnect the modem to see
if the problem goes away. If it doesn’t, report the problem either to your local telephone company or to your
company’s telecommunications people.
If disconnecting the modem eliminates the problem, the modem itself may need service. See the service and
support information that came with your Apple product for instructions on how to contact Apple or an Appleauthorized service provider for assistance.
If you do not disconnect your modem when it is adversely affecting the telephone line, the telephone company
has the right to disconnect your service temporarily until you correct the problem. The telephone company will
notify you as soon as possible. Also, you will be informed of your right to file a complaint with the FCC.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could
affect the operation of your equipment. If this happens, the telephone company will provide advance notice in
order for you to make the necessary modifications to maintain uninterrupted service.
The optional internal modem will not work with party lines, cannot be connected to a coin-operated telephone,
and may not work with a private branch exchange (PBX).
Telephone Consumer Protection Act
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device to send any message via a telephone fax machine unless such message clearly contains in a
margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it
was sent and an identification of the business or other entity, or individual sending the message and the
telephone number of the sending machine of such business, entity, or individual.
8
Communications Regulation Information
Information You Need in Canada
The Industry Canada (IC) label identifies certified equipment. This certification means that the equipment meets
certain telecommunications network protective, operational, and safety requirements. The Department does not
guarantee the equipment will operate to a user’s satisfaction.
Before installing this equipment, make sure that you are permitted to connect to the facilities of the local
telecommunications company. Be sure you use an acceptable method of connection to install the equipment. In
some cases, you may extend the company’s internal wiring for single-line individual service by means of a certified
telephone extension cord. Be aware, however, that compliance with these conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the
supplier. Any equipment malfunctions or repairs or alterations that you make to this equipment may cause the
telecommunications company to request that you disconnect the equipment.
In Canada, contact Apple at: 7495 Birchmount Road, Markham, Ontario, L3R 5G2, 800-263-3394
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines, and internal metallic water pipe system, if present, are connected together. This precaution may
be particularly important in rural areas.
Warning Users should not attempt to make such connections themselves, but should contact the appropriate
electric inspection authority or electrician
m Load number: 0.3 The load number (LN) assigned to each terminal device denotes the percentage of the
total load to be connected to the telephone loop that is used by the device, to prevent overloading. The
termination of a loop may consist of any combination of devices, subject only to the requirement that the sum
of the load numbers of all devices does not exceed 100.
m Telephone jack type: CA-11
Informations Destinés aux Utilisateurs Canadiens
L’étiquette d’Industrie Canada identifie un matériel homologué. Cette étiquette certifie que le matériel est
conforme à certaines normes de protection, d’exploitation et de sécurité des réseaux de télécommunications. Le
Ministère n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il est permis de le raccorder au réseau de l’entreprise
locale de télécommunication. Le matériel doit également être installé en suivant une méthode acceptée de
raccordement. Dans certains cas, le cablage appartenant à l’entreprise utilisé pour un service individuel à ligne
unique peut être prolongé au moyen d’un dispositif homologué de raccordement (cordon prolongateur
téléphonique).
L’abonné ne doit pas oublier qu’il est possible que la conformité aux conditions énoncées ci-dessus n’empechent
pas la dégradation du service dans certaines situations. De fait, les entreprises de télécommunication ne
permettent pas que l’on raccorde un matériel aux prises d’abonné, sauf dans les cas précis prévus par les tarifs
particuliers de ces entreprises.
Les réparations de matériel homologué doivent être effectuées par un centre d’entretien canadien autorisé
désigné par le fournisseur. La compagnie de télécommuncations peut demander à l’utilisateur de débrancher un
appareil suite à des réparations ou des modifications effectuées par l’utilisateur ou à cause de mauvais
fonctionnement.
Veuillez contacter le fournisseur suivant pour des informations supplémentaires :
Apple Canada, Inc.
7495 Birchmount Road
Markham, Ontario
Canada L3R 5G2
Apple Canada Customer Assistance Line: 800-263-3394
Communications Regulation Information
9
Pour sa propre protection, I’utilisateur doit s’assurer que tous les fils de mise à la terre du secteur, des lignes
téléphoniques et les canalisations d’eau métalliques, s’il y en a, soient raccordés ensemble. Cette précaution est
particulièrement importante dans les régions rurales.
Avertissement L’utilisateur ne doit pas tenter de faire ces raccordements lui-même; il doit avoir recours à un
service d’inspection des installations électriques ou à un électricien, selon le cas.
m Numéro de charge : 0.3 L’indice de charge (IC) assigné à chaque dispositif terminal indique, pour éviter toute
surcharge, le pourcentage de la charge totale qui sera raccordée à un circuit téléphonique bouclé utilisé par ce
dispositif. La terminaison du circuit bouclé peut être constituée de n’importe quelle combinaison de dispositifs
pourvu que la somme des indices de charge de l’ensemble des dispositifs ne dépasse pas 100.
m Type de prise téléphonique : CA-11
Information You Need in the United Kingdom
This terminal equipment is intended for direct connection to the analogue Public Switched Telecommunications
Network and is approved for use within the United Kingdom with the following features:
m Modem facility
m Autocalling facility
m Autoanswer facility
m DTMF signaling
m Operation in the absence of proceed indication or upon detection of proceed indication
This product is in conformity with relevant regulatory standards following the provisions of European Council
Directives 73/23/EEC (Low Voltage Directive) and 89/336/EEC amended by 92/31/EEC (EMC Directive).
Information You Need in Germany
Diese Modem-Karte ist als Endeinrichtung vorgesehen und muss an ein TAE mit F-Kodierung angeschlossen
werden.
Diese Endeinrichtung ist in Konformität gemäss Niederspannungsrichtlinie 73 / 23 / EWG sowie EMC-Richtlinien
89 / 336 / EWG und 92 / 31 / EWG.
Information You Need in France
Ce matériel est conforme aux normes applicables de sécurité éléctrique d’après la directive 73 / 23 / CEE et aux
normes applicables de comptabilité éléctromagnétique d’après la directive 89 / 336 / CEE, modifié par la directive
92 / 31 / CEE.
10
Communications Regulation Information
Laser Information
Making adjustments or performing procedures other than those specified in your equipment’s
manual may result in hazardous radiation exposure.
Warning
Do not attempt to disassemble the cabinet containing the laser. The laser beam used in this product is harmful to
the eyes. The use of optical instruments, such as magnifying lenses, with this product increases the potential
hazard to your eyes. For your safety, have this equipment serviced only by an Apple-authorized service provider.
Your computer is a Class 1 laser product. The Class 1 label, located in a user-accessible area, indicates that the
drive meets minimum safety requirements. A service warning label is located in a service-accessible area. The
labels on your product may differ slightly from the ones shown here.
Class 1 label
Service warning label
High-Risk Activities Warning
This computer system is not intended for use in the operation of nuclear facilities, aircraft navigation or
communications systems, or air traffic control machines, or for any other uses where the failure of the computer
system could lead to death, personal injury or severe environmental damage.
Laser Information
11
C H A P T E R
1
1
Setting Up
Your Macintosh PowerBook has been designed so that you can set it up quickly and start
using it right away. If you have never used a PowerBook or are new to Macintosh computers,
read this chapter for an overview of PowerBook features and instructions on getting started.
If you are an experienced user, you may already know enough to get started with your new
PowerBook. Take a moment to look over the information in this manual to find out about the
new features of your Macintosh PowerBook.
Becoming Familiar With Your Macintosh PowerBook
Your PowerBook is designed to keep you working productively in any location. The
information in this manual covers setting up, using, and expanding your PowerBook
hardware. With a PowerBook, you have
m easily configurable and expandable hardware.
m Mac OS system software along with software for connecting to the Internet.
m interactive online information and instructions for using the computer.
m a separate manual for troubleshooting, and system software reinstallation.
Hardware at a Glance
The illustrations on the next several pages show the built-in features of your computer,
including the expansion bays, PC Card slots, and the ports for connecting a printer, network,
and other external equipment.
13
Your Computer’s Components and Controls
Display latch
Microphone
¤ Brightness control
Ï Volume control
Sleep indicator
Speaker
® Power button
— Mute button
Speaker
Security slot
Expansion bay
with a CD-ROM
or DVD-ROM
drive inserted
Left expansion
bay release lever
Trackpad
14
Chapter 1
Trackpad button
Right expansion bay release lever
Sleep indicator
Blinking green light indicates when the PowerBook is in sleep.
®
Power button
Turns your PowerBook on and off.
Microphone
Record sounds directly to your PowerBook hard disk with this built-in microphone.
¤
Brightness control
Increase or decrease the brightness of your PowerBook display.
Ï
Volume control
Increase or decrease the volume of the sound coming from your built-in speakers and
sound output port using this control.
—
Mute button
Turn the sound off and on from the PowerBook external speakers and sound output port.
Trackpad
Move the pointer on the PowerBook display. The trackpad can also be set up so that you
can double-click and select items directly instead of using the trackpad button.
Right expansion bay with a CD-ROM or DVD-ROM drive module inserted
Dual-function expansion bay that accepts either removable modules (3.5-inch or 5.25-inch
size) or a PowerBook battery.
Ç
Security slot
Protect your PowerBook by connecting a security cable.
Setting Up
15
Your Computer’s Ports and Connectors
´ Printer/
External
modem port
Expansion bay with
a PowerBook battery
V Apple Desktop
Bus (ADB) port
Left expansion
bay release
lever
- Sound
output port
√ Sound
input port
-
√
¯
V
¯ Power
´
W Internal
G
g
Æ
modem
port
(some
models)
™
adapter port
G Ethernet port
(10Base-T)
g SCSI port
(HDI-30)
16
Chapter 1
PC Card
eject buttons
Æ External TV
out port
™ External
monitor port
Infrared
window
PC Card slots
Infrared window
Allows you to use infrared (IR) communication to send files to another IR-equipped
computer or connect to a wireless IrDA network.
g
SCSI port (HDI-30)
Connect up to seven external SCSI devices (such as external hard drives or scanners).
´
Printer/External modem port
Connect to printer, external modem, or LocalTalk network.
™
External monitor port
Connect to any external monitor with a VGA-style connector or to any Macintosh monitor
using the included adapter.
Æ
External TV out port
Connect to any television, VCR, or other video device that supports S-Video, NTSC, or PAL
formats.
V
ADB port
Connect a mouse, external keyboard, or other ADB device.
G
Ethernet port (10Base-T)
Connect to a high-speed 10Base-T Ethernet network.
¯
Power adapter port
Connect the power adapter to your PowerBook. When connected, the power adapter
provides power to your PowerBook and also charges the batteries inside the PowerBook.
PC Card slots
Expand the capabilities of your PowerBook using these two PC Card slots that support
both PCMCIA and CardBus formats.
W
Internal modem port (some models)
Connect a standard phone line directly to the optional internal modem.
Left expansion bay with a PowerBook battery
Dual-function expansion bay that accepts either 3.5-inch removable modules or a
PowerBook battery.
√
Sound input port
Connect an external line level microphone or other sound input device.
-
Sound output port
Connect external speakers, headphones, or other sound output device.
Setting Up
17
Setting Up the Computer
Now that you know some essential details about your PowerBook, you’re ready to set it up
and begin using it. Setting up your Macintosh PowerBook for the first time is a quick and
simple process. However, there are a few items that you need to have and things to do before
you begin using your PowerBook.
Before following the setup instructions in this chapter, you may want to read
“Arranging Your Work Area and Equipment” on page 87 for tips on adjusting your work
furniture and computer so that you’re comfortable when using the computer.
Important
Your PowerBook Battery
The battery that came with your PowerBook computer may be already inserted in an
expansion bay. If not, you should insert it now so that it can be charged.
PowerBook battery
You can easily tell if the battery is already installed by looking at the left expansion bay. If you
see an opening for a floppy disk, then the floppy disk drive module is installed and the
battery is not installed. If you see a small button with four small lights to its right, the battery
is installed.
PowerBook battery inserted
in the left expansion bay
Floppy disk drive module
inserted in the left expansion bay
If Your PowerBook Did Not Come With the Battery Installed
If your PowerBook did not come with the battery inserted in the expansion bay, you should
insert it in place of the floppy disk drive module in order to charge it.
To remove the floppy disk drive module and insert the battery, follow these steps:
1
18
Chapter 1
Place your PowerBook on a hard flat surface.
2
Pull the left expansion bay release lever to partially eject the floppy disk drive module.
Wall St. User’s Manual
034-0426-A
3
Slide the floppy disk drive module out of its compartment.
4
Gently slide the battery (with the battery name facing up) into the left expansion bay until
the edge of the battery is flush with the left side of the PowerBook.
Be sure the battery is completely inserted.
If Your PowerBook Came With the Battery Installed
New PowerBook computers that ship with a battery installed have a shipping label covering
the battery to protect it from losing its charge completely. You need to remove the label
before the battery will provide power for the computer.
1
With the display open, peel off the part of the shipping label on the computer’s case, taking
care not to tear the label.
2
Pull the left expansion bay release lever to partially eject the battery.
3
Slide the battery out of its compartment.
4
Carefully remove the shipping label from the battery.
Avoid touching the battery’s metal contacts as you peel off the label.
5
Replace the battery.
Setting Up
19
Plugging In the Computer
Plugging in the power adapter recharges the computer’s battery. You should plug in the
power adapter in case the battery has drained during shipping or storage.
When you are ready to begin, follow these steps:
1
Plug one end of the power cord into the power adapter and the other end into an outlet or
power strip.
Use only the power adapter that came with your Macintosh PowerBook
computer. Adapters for other electronic devices (including other Macintosh PowerBook
models and other portable computers) may look similar, but they may damage your
computer.
Warning
If your power adapter came equipped with a three-wire grounding plug—a plug that has a
third (grounding) pin. This plug will fit only a grounded AC outlet. If you are unable to
insert the plug into the outlet because the outlet is not grounded, contact a licensed
electrician to replace the outlet with a properly grounded outlet. Do not defeat the
purpose of the grounding plug!
2
Plug the power adapter plug into the power adapter port (marked with the icon ¯) on the
back of the computer.
¯ Power adapter port
Power adapter plug
Power cord
Power adapter
20
Chapter 1
Opening the Display
1
Gently pull the display latch to release it.
2
Position the display at a comfortable viewing angle.
You can adjust the angle of the display at any time by tilting it toward or away from you.
Setting Up
21
Turning the Computer On
To turn on the computer for the first time, press the Power button (®) above the keyboard.
® Power button
You should hear a tone when you turn on the computer. It takes the computer a few
moments to start up. As the computer starts up, several messages appear on the screen,
including an application to help you set up the Mac OS.
Note: Certain system settings (such as sound volume, screen brightness, and AppleTalk
connection) may not be saved the first time you set them if the battery has been completely
discharged or has been out of the computer for three days or more. You will need to reset
these system settings the second time you start up the computer.
22
Chapter 1
Problems Turning the Computer On?
Nothing happened when you pressed the Power button.
m The battery may be drained. Make sure that you plugged in the power adapter, and that
the power adapter is firmly connected to both the computer and a power source. If the
power adapter is plugged into a power strip, make sure the power strip is plugged in and
turned on.
m If the computer doesn’t start up when you press the Power button, hold down the Shift,
Function ( fn), and Control (ctrl) keys and then press the Power button (®). The Sleep
indicator light glows briefly while the computer goes through a reset process. After the
power indicator light turns off, wait a few seconds and then press the Power button again
to start up the computer. Once the battery has charged, you should be able to use the
Power button normally.
m If the computer still doesn’t turn on, see the troubleshooting manual that came with your
computer.
There is a slight delay after you press the power button before the computer
starts up.
m Every time you press the power button, the PowerBook performs a check of the
computer’s memory, causing a slight delay in startup. The more memory you have
installed in the PowerBook, the longer the delay.
You see a picture of a disk with a blinking question mark on the screen.
m This icon usually means that the computer can’t find system software on the hard disk or
any disks attached to the computer. You may need to reinstall system software. See the
troubleshooting manual that came with your computer.
Setting Up
23
Adjusting the Internal Display
Before you begin working with your new PowerBook, you may need to adjust your display so
that items on the screen are easy to see. Your PowerBook comes with a control (labeled with
the ¤ icon) that adjusts screen brightness.
¤ Brightness control
m
Use the brightness (¤) control to change the brightness of your display.
If your display is too dark, press and hold the right side of the brightness control (labeled
with the + icon) until items are easily visible on the screen. If your display is too bright,
press and hold the left side of the brightness control (labeled with the – icon) until items
are easily visible on the screen.
Adjusting the Resolution of the Internal Display
You can increase the size of images on your built-in display by switching from the standard
resolution to a scaled resolution. To do so, click the Resolution icon in the Control Strip.
When you switch to a scaled resolution, items on the screen appear larger, making them
easier to see.
Resolution icon
Note: Scaled resolutions may not appear as sharp as the standard display resolution.
24
Chapter 1
Moving Items on the Screen
You use your PowerBook trackpad to move items and select items on the screen. To move
the arrow pointer on the screen, slide your finger across the trackpad. To select, click, or
double-click an item on the screen, press the trackpad button.
Trackpad
Trackpad button
The trackpad is sensitive to how fast you move your finger. To move the pointer a short
distance across the screen, move your finger slowly across the trackpad. The faster you move
your finger, the farther the pointer moves on the screen.
You can find more information on setting up your PowerBook trackpad in the online help,
available in the Help menu.
Tips for Using the Trackpad
For best results when using the trackpad, keep in mind these tips:
m Use your index finger (left or right hand). Use only one finger.
m Use only your finger on the trackpad. Do not use a pen or any other object.
m Keep your finger and the trackpad dry. If the trackpad becomes moist from
humidity or condensation, gently wipe the trackpad with a clean cloth before you
use it.
m Never use any kind of cleaning solutions on your PowerBook trackpad.
Setting Up
25
Putting the Computer to Sleep
Sleep is a power conservation feature of Macintosh PowerBook computers that lets you
quickly wake the computer and bypass the startup process. You can extend the period of
time your battery will power the computer by putting the PowerBook to sleep when you
won’t be using it for several minutes or more. The length of time the computer can be left in
sleep depends on how much charge is left in the battery.
When the computer is in sleep, it has a darkened screen and appears to be off. A small green
light flashes on the case when the computer is in sleep.
To put the computer to sleep, follow these instructions:
1
Press the Power button (®).
The following dialog box appears.
2
Click the Sleep button.
Once you put your computer to sleep, listen for the hard disk to stop spinning
before you move your PowerBook. Moving your computer while the hard disk is spinning
can damage your computer.
Warning
You can also put your computer to sleep by doing one of the following:
m closing the display
m choosing Sleep from the Special menu
m clicking the Energy Settings icon in the Control Strip and choosing Sleep Now from the
menu that appears
Energy Settings icon
3
To wake the computer, press the Power button (®) or any key on the keyboard (except for
the fn key.)
The screen reappears as it was before the computer went to sleep.
Note: To decrease the time it takes for the computer to wake up from sleep, turn off
AppleTalk. For more information, see the online help, available in the Help menu.
26
Chapter 1
Problems Working With Computer Programs or the Mac OS
If software difficulties (such as a software error message on your screen) don’t allow you to
use standard methods of quitting a program or restarting your computer, you can try using
these special key combinations.
To do this...
...press this key combination
Force a program to quit
x-Option-Esc
Force the computer to restart
x-Control–Power button
Force the computer to reset
Shift-Fn-Control–Power button
Important Only force the computer to reset if the other two key combinations are
unsuccessful at solving your problem. When you force a reset, your computer’s default
(original) settings will be restored. You may need to reconfigure settings for power
management, memory, trackpad, TCP/IP, and AppleTalk if you reset the computer.
The reset key combination immediately turns off the computer. Then the sleep indicator
light glows briefly while the computer goes through the reset process. After the sleep
indicator light turns off, wait a few seconds and then press the Power button again to start up
the computer.
For more information on solving problems, see the troubleshooting manual that came with
your computer.
Setting Up
27
Turning the Computer Off
Always use one of the following methods to shut down the computer. If you don’t, you risk
losing any work you haven’t saved. You also risk losing any open documents.
To turn the computer off, follow these instructions:
1
If the computer is in sleep, press the Power button (®) or any key on the keyboard (except
for the fn key) to wake it.
2
Press the Power button.
The following dialog box appears:
3
Press the Return key on the keyboard (or click the Shut Down button in the dialog box).
If any applications are still open, a message asks if you want to save your work before the
computer shuts down.
Note: You can also turn off the computer by choosing Shut Down from the Special menu.
What’s Next
For more information about working with your computer’s hardware, refer to the following
chapters in this manual:
To learn more about the basics of your computer’s hardware, including the expansion bays,
batteries and power, and connecting to a network, go to Chapter 2, “Using Your PowerBook
and Connecting to a Network.”
To learn how to connect additional equipment to your PowerBook, such as printers or
external monitors, go to Chapter 3, “Connecting Additional Equipment.”
To learn how to install additional memory or remove your hard disk, go to Chapter 4,
“Installing a RAM Expansion Card and Removing Your Hard Disk.”
28
Chapter 1
C H A P T E R
2
2
Using Your PowerBook and
Connecting to a Network
This chapter provides information and instructions on using the built-in features of your
Macintosh PowerBook such as expansion bays, batteries, and PC Card slots. In addition, this
chapter describes connecting your PowerBook to a computer network and using your
internal modem (available on certain configurations only).
The information in this chapter will help you get started using the features of your
PowerBook. Many of these features, such as networking and infrared communication, require
that you configure your system software or use specific applications. You can find more
information in the online help, available in the Help menu.
In this chapter you will find information on using the following items:
m expansion bays and expansion bay modules
m batteries and power management
m PC Card slots that support PCMCIA and CardBus formats
m infrared communication
m connecting to a local area network
m using your internal modem (available on certain PowerBook configurations)
For information on connecting additional equipment such as printers and external monitors,
see Chapter 3, “Connecting Additional Equipment.”
29
Using the Expansion Bays
Your PowerBook comes with dual-function expansion bays that accept either expansion bay
modules or PowerBook batteries. Expansion bay modules–such as a floppy disk drive, CDROM drive, or DVD-ROM drive–are removable, which allows you to easily switch or replace
them with another module.
Only use expansion bay modules and batteries specifically designed for this
PowerBook. Expansion bay modules and batteries from other PowerBook computers are
not compatible.
Important
Dual-function expansion bays give you maximum flexibility in setting up your PowerBook to
meet your needs. For example, if you are working with your PowerBook at home or in the
office and you have the power adapter plugged in, you can have a floppy disk drive module
in one expansion bay and a CD-ROM or DVD-ROM drive module in the other expansion bay.
If you are traveling on a long plane trip, you can have a battery in each expansion bay.
Left expansion
bay
Right
expansion bay
Using Expansion Bay Modules
Expansion bay modules and PowerBook batteries are inserted and removed in the same way.
You can switch expansion bay modules while the PowerBook is turned on, in sleep, or shut
down. You should change batteries only when the PowerBook is shut down or in sleep
(unless there is a charged battery in the other expansion bay). For more information on
PowerBook batteries, see “Power Sources” on page 37.
Don’t switch modules while the computer is starting up. Also take care not to
remove a module if a floppy disk, CD-ROM disc, or other media is inserted (even if the
computer is in sleep). If you remove a module (such as the CD-ROM drive) when a disc is
inserted, you’ll see a message telling you to reinsert the module.
Important
If you purchase an expansion bay module from an independent supplier, be sure to follow
the instructions that came with the device. Some modules may have special requirements.
30
Chapter 2
Removing an Expansion Bay Module
Before removing an expansion bay module from your PowerBook, you need to make sure
that it is not in use and that it does not contain a floppy disk, CD, or other media. To remove
an expansion bay module from your Macintosh PowerBook, follow these steps:
1
Place your PowerBook on a hard flat surface.
If you are going to remove both expansion bay modules at the same time,
adjust your PowerBook display so that it is at a 90-degree angle to the computer. If the
display is adjusted too far back, your PowerBook may tip backward when both expansion
bays are empty.
Important
90 o
2
Click the Expansion Bay icon in the Control Strip to determine whether the expansion bay
module is ready to be removed.
Expansion Bay icon
Do not remove an expansion bay module that is in use, or you may lose data. If
you try to remove the module when it is in use, you’ll see a message telling you to
reinsert it.
Important
If the Control Strip indicates that the expansion bay module is not removable, quit any
application programs or files that may be using it. Then do one of the following:
m Drag the icon of the floppy disk, CD, or other media that is inserted in the module to the
Trash.
m Click the icon of the floppy disk, CD, or other media that is inserted in the module and
choose Put Away from the File menu or choose Eject from the Special menu.
m Click the Expansion Bay icon in the Control Strip and choose Make Right Module
Removable from the menu that appears.
Using Your PowerBook and Connecting to a Network
31
To be sure that the computer isn’t using the module, wait 5 seconds after quitting programs
and ejecting a disk before you remove the module.
3
Pull the expansion bay release lever to eject the module.
When the lever is completely extended, the module will be partially out of the expansion bay.
If you see a message telling you to reinsert the module, the module is still in
use. Reinsert the module and repeat step 2.
Important
4
32
Chapter 2
Gently slide the expansion bay module out of the computer.
Inserting an Expansion Bay Module
The PowerBook battery and the optional floppy disk drive module can be placed in either
expansion bay. The CD-ROM or DVD-ROM drive module (because of its larger size) can only
be put in the right expansion bay.
To insert an expansion bay module, follow these steps:
1
If the expansion bay that you want to use already has a module in place, remove it as
described in the previous section.
2
Gently slide the module into the expansion bay until the edge of the module is flush with the
side of the PowerBook and you hear the module click into place.
Make sure that you insert the module with the label facing up.
Insert the module with
the label facing up.
Note: The right expansion bay can accept the wide 5.25-inch CD-ROM or DVD-ROM drive
module or the narrower floppy disk drive module or PowerBook battery. When a narrower
device is in the expansion bay, a small flap covers the empty part of the bay. When the wider
CD-ROM or DVD-ROM drive module is inserted, the flap folds into the bay.
Using Your PowerBook and Connecting to a Network
33
Using a Disc in the CD-ROM or DVD-ROM Drive
Inserting a Disc
To load a disc in the drive, follow these steps:
1
Make sure that the CD-ROM or DVD-ROM drive module is inserted into the right expansion
bay.
2
Start up the PowerBook, if it’s not already on.
3
Press the Open button on the outside of the module to open its tray.
Open button
4
Pull the tray all the way open.
Drive spindle
Drive lens
Important
34
Chapter 2
Do not touch the drive lens.
5
Place a disc in the tray, with the label facing up.
Make sure the disc is lying flat in the tray and is seated firmly on the spindle.
Insert the disc,
label side up.
Note: CD-ROM and DVD-ROM drives have small locks on the drive spindle that securely
hold the disc in place. When inserting a disc over these locks, you may need to apply
additional pressure. Place the hole in the center of the disc directly over the drive spindle
and press down until you feel the disc lock into place.
6
Push the tray in to close it.
Keep the tray closed except when loading discs. This prevents dust from getting inside the
mechanism. Be sure to keep discs free of dust and grease.
Note: When the drive is in use, you may notice some vibration as the disc spins rapidly.
Certain discs can cause the drive to vibrate because they have heavily inked artwork or a label
that creates an imbalance as the drive spins. Some vibration is not unusual for a high-speed
CD-ROM or DVD-ROM drive. To minimize vibration from unbalanced discs, do not put labels
on your discs. In addition, place the computer on a flat, solid surface when using the drive.
Using Your PowerBook and Connecting to a Network
35
Ejecting a Disc
Follow these instructions to open the tray and eject a disc from the drive:
1
Open the tray.
There are several ways to open the tray of your drive.
If a disc icon appears on your screen, do one of the following:
m Select the disc icon on your screen and drag the icon to the Trash.
m Click the disc icon and choose Put Away from the File menu or Eject from the Special
menu.
m Click the Expansion Bay icon in the Control Strip and choose Make Right Module
Removable from the pop-up menu that appears.
Expansion Bay icon
If no disc icon appears on your screen, do this:
m Press the Open button on your drive.
If you can’t eject a disc, try this method:
m If the standard methods of ejecting a disc do not work (or the computer is shut down),
you can eject the disc manually. Carefully insert the end of a pen or straightened paper
clip into the small recessed button next to the eject button, and push firmly until the tray
disengages.
2
Take the disc out of the tray.
Store your discs in a safe place, away from heat, dust, and moisture.
3
Push the tray in to close it.
To avoid possible damage to the tray or the drive, keep the tray closed when you are not
using it.
36
Chapter 2
Power Sources
Your computer can draw its operating power either from a PowerBook battery in one of the
expansion bays or from an external power source, using the external power adapter that
came with your computer.
AC Power
You can run your computer from an electrical outlet by plugging in the external power
adapter that came with your computer. A battery in an expansion bay will automatically be
charged whenever the external power adapter is plugged in.
Be sure to use only the external power adapter that came with your computer
or one made specifically for this PowerBook model.
Important
Main Battery
The main lithium ion (LiIon) battery provides power to your computer when it is not
plugged into an electrical outlet.
This battery should provide power for 2–3.5 hours of work time (you may get longer work
time, depending on the Macintosh PowerBook model you have and the battery conservation
features you use). You can find more information about the battery and power conservation
software that came with your PowerBook in the online help, available in the Help menu.
Note: The LiIon battery is charged whenever the external power adapter is connected.
However, the adapter will charge the battery more quickly if the computer is shut down or in
sleep.
Optional Second Battery
You can configure your computer with a battery in each expansion bay. This configuration is
especially useful when you need to use your PowerBook under battery power for a long
amount of time, such as on a long plane flight. You can purchase a second battery from an
Apple-authorized dealer.
Note: When fully charged batteries are installed in both expansion bays, the batteries are
discharged one at a time. The battery in the left expansion bay is discharged first. When the
charge in the left battery is depleted, the PowerBook switches to the battery in the right
expansion bay.
Using Your PowerBook and Connecting to a Network
37
Recharging the Battery
To recharge the battery inside the computer, plug in the external power adapter. You may
also use an external battery charger designed specifically for your Macintosh PowerBook
model (available from other manufacturers).
When the AC adapter is plugged in, the LiIon battery is recharged whether the computer is
off, on, or in sleep. However, the battery will recharge more quickly if the computer is off or
in sleep.
¯ Power adapter port
Power adapter plug
Power cord
Power adapter
Use only the external power adapter that came with your computer. Adapters
for other electronic devices (including other portable computers) may look similar, but
they may damage your computer.
Warning
If your power adapter came equipped with a three-wire grounding plug—a plug that has a
third (grounding) pin—this plug will fit only a grounded AC outlet. If you are unable to
insert the plug into the outlet because the outlet is not grounded, contact a licensed
electrician to replace the outlet with a properly grounded outlet. Do not defeat the
purpose of the grounding plug!
Monitoring the Battery Charge
There are four ways you can determine the charge level of your battery:
m Look in the Battery Monitor portion of the Control Strip.
m See low-power messages on your display.
m Look at the battery level icon next to the clock in the menu bar.
m Look at the battery indicator level lights on the battery.
38
Chapter 2
Using the Battery Level Indicator Lights
You can tell the charge left in your battery by looking at the battery level indicator lights on
the battery itself. The charge can be checked with the battery inserted or outside the
PowerBook.
Push the battery level indicator button to activate the battery level indicator
lights.
The lights show how much charge is left in the battery. A lighted square indicates that the
battery has power; an unlighted square indicates lack of charge. The indicator lights remain
lit for a few seconds.
Battery level
indicator lights
Battery level
indicator button
Fully charged
3/4 charged
1/2 charged
1/4 charged
Note: The battery level indicator lights stay on while the battery is being charged by the
external power adapter. When the battery is fully charged, the lights turn off.
Responding to Low-Power Messages
When the battery runs low, the computer displays a series of low-power messages. The work
time remaining after you see the first message varies depending on how you are using the
computer. It’s a good idea to act promptly.
What You Should Do
When you see a low-power message, you should do one of the following:
m Plug in the external power adapter.
m Save your work and shut down the computer.
m Put the computer to sleep, and quickly replace the depleted battery with a charged one.
What You Should Know
When the first low-power message appears, the screen dims automatically to save power. If
you continue to work without plugging in the power adapter or changing the battery, the
computer displays a second low-power message indicating that the computer is about to put
itself to sleep. Within a few seconds, the computer goes to sleep automatically to protect the
contents of RAM. All activities are interrupted. It’s a good idea to save your work when you
see the first of the two low-power messages to make sure you don’t lose information.
Using Your PowerBook and Connecting to a Network
39
If you continue working until the computer goes to sleep automatically, you can wake it
again as soon as you plug in the power adapter or replace the battery with a charged battery.
Recharge a depleted battery as soon as possible. Leaving a depleted battery in
the computer for a length of time (especially in a hot location, such as the trunk of a car)
may damage the battery so that it can’t be recharged. If this happens, you need to replace
the battery.
Important
Maximizing Work Time
The amount of work time your PowerBook’s battery can provide before you need to
recharge depends on the equipment you’re using with your computer and the steps you take
to conserve power while you work.
Battery-saving measures include the following (in order of effectiveness):
m Make sure that power cycling is turned on.
Your PowerBook reduces the processor power when it is not being used in order to save
battery power. For instructions on setting up power cycling, see the online help, available
in the Help menu.
m Set your PowerBook to run in a reduced processor speed mode when performing tasks
such as word processing that don’t require fast processing speed.
Setting your PowerBook to run in a reduced processor mode will provide additional
battery savings but may affect system performance. For instructions, see the online help,
available in the Help menu.
m Remove CD-ROM and DVD-ROM discs when they are not in use.
m Set the hard disk to spin down after a short time interval.
m Set your PowerBook display to turn off (instead of dim) when not in use.
m Reduce screen brightness using the brightness control (¤) on the PowerBook case.
m Set your PowerBook to sleep after inactivity of 5 minutes or less.
m Take advantage of the sleep feature of your PowerBook whenever your work is
interrupted. You just need to close the display to put the computer in sleep.
You can find more information on the power conservation software and battery
conservation tips in the online help, available in the Help menu.
Note: If your PowerBook came with an internal modem, it does not support the Energy
Saver feature “Wake up when the modem detects a ring.”
40
Chapter 2
Removing or Replacing the Battery
PowerBook batteries are removed in the same way that expansion bay modules are. To
remove or replace the battery, follow these steps:
1
Place your PowerBook on a hard, flat surface.
2
Save your work and then shut down the computer, put it to sleep, or plug in the power
adapter.
3
Pull the expansion bay release lever to eject the PowerBook battery.
4
Gently slide the battery out of the expansion bay.
5
Push the charged battery into the expansion bay to lock it into place.
It’s a good idea to plug in the power adapter in case the battery is not fully charged.
Batteries contain chemicals, some of which may be harmful to the
environment. Please dispose of used batteries according to your local environmental
guidelines.
Important
Lithium-ion
(Li-ion)
Using Your PowerBook and Connecting to a Network
41
Using PC Cards
PC Cards (also known as PCMCIA or CardBus cards) are about the size of a thick credit card
and have a 68-pin connector at one end. They come in many varieties, such as fax/modem
cards, mass-storage cards, Ethernet connection cards, zoomed video cards, and wireless
communication cards. You can use PC Cards to expand your Macintosh PowerBook’s
capabilities.
Your Macintosh PowerBook has two PC Card slots. You can insert a card into either slot, or
(depending on the cards you’re using) you can use both slots simultaneously.
There are three types of PC Cards. The different types refer to the thickness of the card. A
Type I card is 3.3 millimeters (mm) thick, a Type II card is 5 mm thick, and a Type III card is
10.5 mm thick.
Warning Make sure only to use cards that are compatible with your Macintosh
PowerBook. If you use an incompatible card, you may damage the card or your
PowerBook. If you are not sure whether a PC Card is compatible with your PowerBook,
contact the PC Card’s manufacturer.
You can place a Type I or Type II card in either slot. You can place a Type III card only in the
lower slot. When a Type III card is installed, you cannot use the upper slot. You may find it
useful to get in the habit of always using the lower slot first to make sure the card is properly
inserted.
A special type of PC Card supports “zoomed video,” which can display full-motion video in a
window on the computer’s screen.
Note: Zoomed video cards must be placed in the lower PC Card slot.
This section describes how to insert and eject PC Cards and how to use PC Card modems.
You can find more information on using PC Cards in the online help, available in the Help
menu.
42
Chapter 2
Inserting a PC Card
To insert a card, do this:
m Insert the card, label up, into the slot. Make sure the card is level.
A Type I or Type II PC Card
can be inserted in either
the upper or lower slot.
A Type III PC Card must
be inserted in the lower slot.
You’ll feel some resistance as you slide the card in. When the card is firmly seated, you will
feel it click into place.
An icon for the PC Card appears on the desktop.
You are now ready to use the card.
Consult the card’s documentation for details of its use.
Using Your PowerBook and Connecting to a Network
43
Ejecting a PC Card
You can eject a PC Card when your computer is on or off. You cannot eject a PC Card when
the computer is in sleep.
To eject a PC Card when the computer is on, follow these steps:
1
If the computer is in sleep, press the Power button (®) to wake it.
2
Make sure that nothing is blocking the card slot.
3
Click the PC Card’s icon to select it.
4
Drag the card’s icon to the Trash to eject it from the card slot.
The card will partially eject from the card slot.
5
Pull the card out of the slot.
If you want to use the card again immediately, pull it out about an inch more, wait 10
seconds, and then push it back in.
Do not force a PC Card out of the slot. Doing so may damage your computer
or PC Card.
Warning
You can also eject a PC Card by doing the following:
m Click the card’s icon to select it. Then choose Put Away from the File menu or Eject from
the Special menu. After the card is ejected, pull it out of the slot. (If a dimmed icon of the
card remains on the desktop, drag it to the Trash.)
m Press the eject button for the slot containing the PC Card you want to eject. If the card is
not in use, it will usually be ejected.
Try to use the eject buttons only when the computer is turned off. Many PC
Cards won’t eject this way if the computer is on.
Important
Press to eject
upper PC card
Press to eject
lower PC card
44
Chapter 2
If You Can’t Eject a Card
If you are unable to eject a card, follow these steps:
1
Shut down the PowerBook.
2
Straighten one end of a paper clip.
3
Insert the end of the straightened paper clip into the hole next to the slot that contains the
card, and press gently but firmly until the card is ejected.
If you can’t eject a card, insert
the end of a straightened paper
clip into the hole next to the slot.
This hole is for the upper slot.
4
Pull the card out of the slot.
Using a Zoomed Video PC Card
The lower PC Card slot has circuitry for handling video signals, called “zoomed video.” You
can purchase PC Cards to which you can provide a video signal from a video camera, VCR, or
other such device. The zoomed video card can only be used in the lower slot.
With a zoomed video card installed, the PowerBook can display video on the computer’s
screen or on an external monitor while performing other tasks at the same time.
If you purchase a zoomed video PC Card, be sure it has software that works with your
PowerBook.
Using Your PowerBook and Connecting to a Network
45
Using a PC Card Modem
If your PowerBook does not come with a built-in modem, you can purchase a PC Card
modem. For information on using your built-in modem, see the section “Using Your
PowerBook’s Optional Internal Modem” on page 51. If you are using a PC Card modem,
make sure you do the following:
1
Install the communications software you want to use and any software that came with your
modem.
2
Insert the PC Card modem.
A PC Card modem icon appears on the desktop.
3
Plug your modem into a working phone line.
4
To set up and connect, follow the instructions that came with your modem and
communications software.
If you are having problems setting up your PC Card modem, try the following:
m Make sure to choose your PC Card modem in your communications software.
Some modem files come with your PowerBook. If your PC Card modem is not listed,
check the software that came with your modem. If you find the file for your modem, drag
it to the Modem Scripts folder inside the Extensions folder (which is in the System
Folder).
If you can’t find the file for your modem, try using the modem file for a different model
from the same manufacturer. If this doesn’t help, you may be able to get the correct
modem file from your PC Card modem’s manufacturer.
m Make sure to choose the port for your PC Card modem.
The port shows the modem name or type, rather than the name of the PC Card slot.
Some programs use a virtual port, the Data Port, to allow fax and data applications to
share the modem. See the instructions that came with your modem and communications
software to determine the specific setup procedure.
You must reselect the port if you remove the modem and later put it in the other slot.
46
Chapter 2
Using the Infrared File Transfer Capability
Your PowerBook comes with built-in infrared (IR) communication features that let you send
and receive data without wires.
IR window
With IR communications, you can exchange files with another PowerBook or with a desktop
Macintosh using an external IR module. You can also use IR to make a wireless connection to
a network by means of a specialized local area network (LAN) access device that is
compatible with the Infrared Data Association (IrDA) Standard specifications.
To transfer files, your computer and the other IR device must be within range of each other
with their IR windows facing. The range depends on the devices and the method of
communication.
Note: For best results, place the IR windows directly facing each other. If the angle between
the windows is greater than 10 degrees, an IR connection may not be possible.
IR-equipped PowerBook computers must be within 3 feet of each other to exchange files
using the IRTalk transfer protocol (at 230 kilobits per second). Your computer must be within
3 feet of a LAN access device or another IrDA PowerBook to make a connection (at a
communications rate of up to 4 megabits per second).
For information on setting up your software for IR communication, see the online help,
available in the Help menu.
Using Your PowerBook and Connecting to a Network
47
Connecting to a Local Area Network
Your computer has built-in hardware allowing you to connect to the following types of
networks:
m LocalTalk: To connect to a Local Talk network, you plug a LocalTalk cable to the printer/
external modem port (´) on the back of the PowerBook.
m Ethernet: To connect to a high-speed Ethernet network, you plug an Ethernet cable into
the Ethernet port (G) on the back of the PowerBook.
Once your computer is connected to a network, see the online help, available in the Help
menu, for information about printing to a network printer, accessing information on file
servers, and sharing files on your computer with other users. Ask your network administrator
for information about network services such as Internet access and electronic mail.
Connecting to a LocalTalk Network
To connect your Macintosh PowerBook to a LocalTalk network, you need LocalTalk cables
and a LocalTalk adapter (available from your Apple-authorized dealer). If a network
administrator is responsible for network maintenance and upkeep at your location, ask for
help connecting your computer to the network.
To connect your Macintosh to a LocalTalk network, do the following:
1
Open the cover on the computer’s back panel to access the printer/external modem port
(labeled with the ´ icon).
2
Attach the LocalTalk adapter to the printer/external modem port.
-
√
¯
V
´
G
g
´ Printer/External
modem port
48
Chapter 2
Æ
™
3
Attach a network cable between the LocalTalk adapter connected to your computer and a
LocalTalk adapter on your existing network.
-
√
¯
V
´
G
g
4
Æ
™
If you are using a LocalTalk adapter with RJ-11 (telephone) connectors, connect a terminator
to the unused RJ-11 connector on the LocalTalk adapter. A LocalTalk adapter with DIN-8
connectors doesn’t require an external terminator. (For more information on terminators,
see the instructions that came with the Apple LocalTalk RJ-11 Connector Kit.)
See “Configuring Your Network Connection” on page 50 for information on configuring your
LocalTalk connection.
Using Your PowerBook and Connecting to a Network
49
Connecting to a 10Base-T Ethernet Network
The built-in Ethernet capabilities of your Macintosh PowerBook allow you to connect to a
standard (10 Mbit) Ethernet network. If a network administrator is responsible for network
maintenance and upkeep at your location, ask for help connecting your computer to the
network.
To connect your Macintosh PowerBook to an Ethernet network, use the Ethernet cable that
came with your computer. (The connector on the cable looks like a standard telephone
connector, but it is wider.)
To connect your PowerBook to an Ethernet network:
1
Open the cover on the computer’s back panel to access your Ethernet connector (labeled
with a G icon).
-
√
¯
V
´
G
g
Æ
™
G Ethernet port
2
Locate a modular Ethernet cable and connect one end of the cable to the network.
3
Connect the free end of the Ethernet cable to the Ethernet port.
-
√
¯
V
´
G
g
4
Æ
™
Set up your PowerBook software to use Ethernet communication.
Configuring Your Network Connection
After you physically connect your computer to a network, you need to configure the software
for your network connection using AppleTalk and/or TCP/IP. You can find more information
in the online help, available in the Help menu.
50
Chapter 2
Using Your PowerBook’s Optional Internal Modem
Some models of the Macintosh PowerBook come with an internal modem card installed in
the communications slot inside your computer. To see if a modem is installed, open the
modem panel on the left side of the computer. If you see a connector for a phone line, then
the modem is installed.
Modem panel
Phone line
connector
Setting Up Your Modem’s Connections
To use the internal modem, you need the following:
m the single-line telephone cord supplied with your PowerBook, which has a standard RJ-11
phone connector at each end
m an analog telephone line (the type found in most homes) with a modular jack
You can find more information on setting up your modem communication software to
work with your PowerBook internal modem in the online help, available in the Help
menu.
Connecting the Telephone Line to the Modem
Follow these steps to connect the telephone line to the modem.
1
Open the cover on the left side of the computer to expose the modem telephone line
connector.
2
Locate the telephone cord that came with your PowerBook.
Use the telephone cord that came with your computer or an equivalent
single-line telephone cord. Other types of telephone cords may not work correctly with the
modem.
Important
Using Your PowerBook and Connecting to a Network
51
3
Plug one end of the telephone cord into the internal modem port on your PowerBook.
4
Plug the other end of the telephone cord into your telephone wall socket.
The telephone line must be an analog line—the type used in residences. Do
not connect a digital telephone line to the modem, because the wrong type of line could
damage the modem.
Warning
Once the telephone line is connected, you are ready to begin using the modem.
When you have established a modem connection with another computer or an
online service, do not put the computer to sleep. Doing so will disconnect the modem.
Important
52
Chapter 2
What Modems Do
A modem allows your computer to communicate over telephone lines by converting
information from the digital format used by the computer to the analog format used by most
telephone systems. It dials the telephone number, establishes a connection with another
modem, and controls the flow of data so that communication takes place with optimal speed
and accuracy.
The actual speed of data transmission can vary with line conditions. Because
Federal Communications Commission (FCC) rules restrict the power output of modems
used by service providers, transmission speeds are limited to 53 Kbps (53,000 bits per
second) in the United States. You can obtain speeds of 53 Kbps on downloads from an
Internet service provider (ISP) that uses K56flex modems.
Important
To exchange data over a telephone line, your modem and the remote modem must establish
a connection and agree on how data will be transmitted in these ways:
m Connection speed: Initially, your modem tries to connect at its fastest speed. If the
remote modem cannot connect at this speed, your modem tries to use the next highest
speed. The two modems continue this fallback process until they find the highest speed
supported by both.
There are several circumstances that may prevent your modem from communicating at its
fastest speed. For example, the telephone number you use to connect to your ISP may
not support the fastest speed of your modem.
m Error control: Error control ensures data accuracy. Your modem and the remote modem
must agree on an error control method. Your modem will try to use one of the methods it
supports. If the remote modem doesn’t support any of these methods, error control isn’t
used. Modems can still communicate reliably without error control.
m Data compression: Compression increases the speed of data transmission by up to four
times. Your modem will try to use one of the data compression methods it supports. If
the remote modem doesn’t support any of these methods, data compression isn’t used.
Modems can still communicate reliably without data compression.
Your modem is set up to make the best possible connection with other modems
automatically. You do not need to do anything.
Software for Your Modem
Your Macintosh PowerBook comes with modem software, including programs to connect to
the Internet and to send and receive faxes. Some of this software is already installed for you.
Other software, such as your fax software, needs to be installed from a separate CD that came
with your computer. For instructions on using these programs, see their electronic manuals
on your computer’s hard disk or on the CD that came with your computer.
Using Your PowerBook and Connecting to a Network
53
Choosing the Port Setting
You must specify the modem port in each communications program before you can connect
to another computer by modem.
The following example shows how to specify the modem port in America Online (AOL)
software.
1
Open AOL (on your hard disk).
2
If you are new to America Online, click Continue in the dialog box that appears. If you have
an AOL account already, click Upgrade.
3
Follow the instructions on the screen to set up an AOL account or to upgrade your current
AOL account.
When you finish setting up your AOL account, the AOL Welcome window appears.
4
Click Setup in the Welcome window.
The Location window opens.
5
In the Port pop-up menu, choose Internal Modem.
6
In the Type pop-up menu, choose PowerBook/GV Internal 56.
7
In the Speed pop-up menu, choose 57600 bps.
Always choose the highest speed available. This is the speed at which the computer
communicates with the modem.
8
Click Save.
Now the AOL software is ready to use with your modem.
54
Chapter 2
Modem Tips and Troubleshooting
If you have problems using your modem, try the following suggestions:
m Make sure the telephone cord is connected properly. Unplug the telephone cord and
reconnect it to ensure a good connection. You may also want to try a different telephone
cord.
Note: Your PowerBook internal modem does not support the Energy Saver feature
“Wake up when the modem detects a ring.”
m Make sure the telephone line you are using is working.
Connect a telephone to the line. You should hear a dial tone when you lift the receiver.
Listen for noise on the line. If the telephone line quality is poor, your modem may have
trouble maintaining a connection or sending and receiving faxes. If you have a problem
with the line quality, try connecting again. If the problem persists, you may need to
contact your telephone service provider.
The PowerBook internal modem will not work with party lines, cannot be
connected to a coin-operated telephone, and may not work with a private branch exchange
(PBX).
Important
Using Your PowerBook and Connecting to a Network
55
C H A P T E R
3
3
Connecting Additional Equipment
The illustration below shows where equipment should be connected to your Macintosh
PowerBook. In most cases, you should refer to the documentation that came with your
equipment for instructions on connecting. The safest course is always to shut down your
Macintosh PowerBook before you connect any cable other than the power adapter. However,
you can connect external devices to the sound input port (√), sound output port (-),
printer/external modem port (´), Apple Desktop Bus port (V), and Ethernet port (G)
while the computer is on.
¯ Power adapter port
V Apple Desktop Bus
G Ethernet port
(10Base-T )
(ADB) port
™ External
monitor port
- Sound output port
√ Sound input port
-
√
¯
V
´
G
g
´ Printer/external
modem port
g SCSI port
(HDI-30)
Æ
™
Æ External TV
out port
Infrared
W Internal modem
port (some models)
Information is provided in this chapter for connecting the following devices:
m printers and external modems
m SCSI devices
m external monitors and video display devices
m sound input and output devices
m mouse, keyboard, or other ADB devices
m security equipment to protect your PowerBook
57
Connecting a Printer
Your PowerBook has a printer/external modem port, which you use to connect a printer.
-
√
¯
V
´
G
g
Æ
™
´ Printer/External
modem port
The printer/external modem port can accept either a direct connection (to a printer such as
a StyleWriter) or a LocalTalk network connection (to a printer such as a LaserWriter). See the
documentation that came with your printer for specific information about the type of
connection it requires. Your computer comes with most Apple printer software (called
“printer drivers”) already installed. If you are using a printer from a manufacturer other than
Apple, you may need to install a printer driver.
You use the Chooser to tell the computer which port you used to connect your printer. You
can find more information on selecting a printer in the online help, available in the Help
menu.
Connecting an External Modem
Your PowerBook provides several different ways to connect to the rest of the world using a
modem. If your PowerBook came with the optional built-in modem, see “Using Your
PowerBook’s Optional Internal Modem” on page 51. If your PowerBook did not come with
an internal modem, you can use a PC Card modem in your computer’s PC Card slot (see
“Using a PC Card Modem” on page 46). You can also connect an external modem to the
printer/external modem port on the back panel of the computer.
To connect an external modem, follow these steps:
1
Connect the modem to a power source and to the phone line.
2
Make sure the modem is turned off.
3
With the computer shut down, connect the modem cable to the printer/external modem
port (´).
4
Turn on the modem.
5
Start up the computer.
The external modem is ready to use.
58
Chapter 3
Connecting SCSI Devices
You can attach up to seven SCSI devices, including hard disk drives, CD-ROM drives, and
scanners, to your computer by linking them together in a chain that starts at your computer’s
SCSI port.
To connect a SCSI device to your Macintosh PowerBook, you need an Apple HDI-30 SCSI
System Cable or equivalent. This cable is light gray, is about 19 inches long, and has 29 pins
(one “missing” pin) on the end that connects to the PowerBook.
Refer to the manuals that came with your SCSI devices for instructions on installing any
necessary software, setting SCSI ID numbers, and connecting SCSI cables and SCSI
terminators. The illustrations on the next page briefly describe the proper positioning of
SCSI terminators. A SCSI chain of devices must include a terminator on the first and last
devices in the chain (but nowhere else in the chain). Some devices include internal
terminators. Your Macintosh PowerBook is internally terminated.
The names and the part numbers of the cables mentioned in this chapter are as follows:
Type of Connection
Name of Part
Part Number
From your computer to a SCSI device
Apple HDI-30 SCSI System
Cable
M2538**/A
From SCSI device to SCSI device
Apple SCSI Peripheral
Interface Cable
M0207
For SCSI disk mode
Apple HDI-30 SCSI Disk
Adapter Cable
M2539**/A
When connecting SCSI equipment, always turn off power to all devices in the
chain, including your computer. If you don’t, you could lose information and damage your
equipment.
Warning
Where to add cable terminators when connecting a single SCSI device
HDI-30 SCSI system cable
Terminator
(If this SCSI device has an internal
terminator, omit this external terminator.)
Connecting Additional Equipment
59
Where to add cable terminators when connecting two or more SCSI devices
HDI-30 SCSI
system cable
SCSI peripheral interface cables
Terminator
(If this SCSI device has an
internal terminator, omit
this external terminator.)
Using Your Macintosh PowerBook as a Hard Disk
The Apple HDI-30 SCSI Disk Adapter lets you connect your Macintosh PowerBook to another
computer as a hard disk. The PowerBook internal drive appears on the desktop of the other
computer as a hard disk icon, and you can transfer information between the computers by
dragging files. This feature is called SCSI disk mode.
The Apple HDI-30 SCSI Disk Adapter cable is dark gray, is about 10 inches long, and has 30
pins.
Your Macintosh PowerBook hard disk uses Mac OS Extended format (also
known as HFS Plus). In order to use your PowerBook in SCSI disk mode, the computer you
are connecting to must be using Mac OS 8.1 or later. If the computer is using an earlier
version of system software, you will not be able to see the files on your PowerBook hard
disk.
Important
Connecting Your Computer as a Hard Disk
Before making any connections, you need to assign a unique SCSI ID number to the
PowerBook. (The ID numbers allow the computer to communicate with several connected
SCSI devices.)
Important Turn off password protection before using SCSI disk mode. For instructions,
see the online help, available in the Help menu.
1
Set up your system software to use your PowerBook in SCSI disk mode.
For information and instructions, see the online help, available in the Help menu.
If you are connecting the PowerBook to an existing SCSI chain, make sure to give it an ID
number different from those of the other devices. (Many devices include an ID number
indicator on the back panel.)
2
60
Chapter 3
Shut down the PowerBook and plug in the power adapter.
3
Shut down the computer you are connecting to and turn off any other devices in the SCSI
chain.
Always shut down the PowerBook before connecting or disconnecting the
SCSI disk adapter cable. Connecting the adapter cable while the computer is turned on
can damage the computer.
Warning
4
Connect the small end of the Apple HDI-30 SCSI Disk Adapter to the SCSI port on your
PowerBook.
5
If you are connecting the Macintosh PowerBook directly to the other computer (rather than
to an external device in the SCSI chain), attach a SCSI system cable to the other computer.
6
Connect the large end of the Apple HDI-30 SCSI Disk Adapter cable to a SCSI peripheral
interface cable attached to the SCSI port on the last device in the SCSI chain, or to the SCSI
system cable on the other computer.
7
Make sure that your PowerBook display is open.
Always keep your PowerBook display open while operating in SCSI disk mode
because heat from the PowerBook is partially dissipated through the keyboard. Closing
your display may cause the PowerBook to function improperly.
Warning
8
Turn on the PowerBook by pressing the Power button (®). After a few seconds a SCSI icon
appears on the screen, showing the ID number you assigned in step 1.
If you do not see the SCSI icon, and the computer starts up normally or
displays an error message, press the Power button (®) to shut down (if you can) and
then immediately disconnect your computer from the SCSI chain. (If you can’t choose
Shut Down, try resetting your PowerBook by holding down the Shift, Function ( fn), and
Control (ctrl) keys and then pressing the Power button. If you cannot shut down your
PowerBook, you should disconnect the cable anyway, or you may lose information.) Then
go back and repeat steps 4 through 8, making sure to use the proper cables.
Warning
9
10
Turn on the other SCSI devices in the chain, if any.
Turn on the other computer.
Connecting Additional Equipment
61
The PowerBook’s internal drive appears as a hard disk icon on the screen of the computer
you connected it to. You can now transfer and use files as if the Macintosh PowerBook were
an external disk drive.
Quitting SCSI Disk Mode
1
Shut down the computer your PowerBook is connected to.
2
Press the Power button (®) on the PowerBook.
3
Turn off any other SCSI devices in the chain.
4
Disconnect the PowerBook from the adapter cable.
Do not leave the adapter cable attached to the PowerBook. If you do, the
computer will behave as though it is still in SCSI disk mode when you try to restart.
Important
5
If necessary, disconnect the adapter cable from the other computer or its SCSI chain.
You can leave the adapter cable attached if you wish.
Your equipment is now ready for normal use. If you disconnected the adapter cable from the
other computer or SCSI chain, make sure that the SCSI chain is properly terminated.
62
Chapter 3
Using an External Monitor
You can connect an external monitor to your Macintosh PowerBook. The types of monitors
you can use with this model and the way images are displayed on an external monitor differ
somewhat from the features available with other PowerBook computers.
To make the best choice of an external monitor, keep the following in mind:
m Your PowerBook can support a variety of external monitors, including 17-inch and 20-inch
multiple-scan displays.
m Your PowerBook display must be open when you use an external monitor because heat
from the PowerBook is partially dissipated through the keyboard. Closing the display will
cause the PowerBook to go to sleep. Macintosh PowerBook G3 Series computers do not
work with the display closed.
m The computer’s back panel has a VGA-style connector. You can connect the cable for a
VGA-style monitor directly to your PowerBook.
m To connect an Apple-compatible monitor to your PowerBook, you must use the video
adapter that came with the computer.
m Images can appear on the internal display, the external monitor, or both, depending on
your choice of resolution on the external monitor.
m When an image appears on both screens, it is exactly the same (this feature is known as
“simulscan” or “video mirroring”). You cannot move the pointer or menu bar from one
screen to the other (as you can when a second display is connected to most Macintosh
desktop computers).
Video mirroring works only with the PowerBook display’s standard resolution.
For example, when the 12.1" display is set to its standard resolution (800 x 600) or the
14.1" display is set to its standard resolution (1024 x 768), the display can mirror the
external monitor. However, if you switch the resolution to 640 x 480, the built-in display
will go dark because scaled resolutions cannot be used for video mirroring.
Important
m When an external monitor offers the same resolution as the PowerBook’s internal display,
the image appears on both screens the first time you turn on the computer.
m If a multiple-resolution external monitor provides a list of its capabilities, the list appears
in the Control Strip. Otherwise the system uses a resolution of 640 x 480 pixels as the
default for that monitor.
For more information on adjusting the resolution of an external monitor, see the online
help, available in the Help menu.
Connecting Additional Equipment
63
Connecting an External Monitor
To connect an external monitor to your PowerBook, follow these steps. Also consult the
documentation that came with the monitor.
1
Press the Power button (®) once to get the Shut Down dialog box.
2
Click Shut Down or Sleep.
If you connect a monitor with your computer turned on, the computer will not recognize the
monitor.
3
Place the monitor near the PowerBook.
Keep the computer and the monitor at least 8 inches apart. Interference
between the monitor and your computer’s floppy disk drive can cause errors on your
floppy disks.
Important
8 inches minimum
Arrange the monitor so the top of the screen is slightly below eye level while you work.
Position the monitor to minimize glare and reflections on the screen from lights and
windows.
4
Make sure that the PowerBook display is open.
Macintosh PowerBook G3 Series computers do not support operation with the
display closed.
Important
5
Make sure the monitor’s power cord is attached to the monitor. Plug the other end into a
grounded outlet or power strip.
If your monitor’s power cord is designed to plug into the power receptacle on the back of a
computer, you can obtain a cord with the correct plug from your Apple-authorized dealer.
If you are using a power strip, make sure it is turned on.
6
If you are connecting an Apple-compatible monitor, attach the monitor adapter (shown on
the next page) that came with your computer to one end of the external monitor’s cable.
If you are connecting a VGA or SVGA monitor, skip this step.
64
Chapter 3
7
Make sure the other end of the monitor’s cable is attached to the monitor. Then attach the
end of the cable (with the monitor adapter, if you connected it) to the external monitor port
(™) on the back of the PowerBook.
-
√
¯
V
´
G
g
Æ
™
™ External monitor port
Monitor adapter
Monitor cable
(to Macintosh-compatible monitor)
If you are connecting a VGA or SVGA monitor, do not use the adapter. Connect the monitor
cable directly to the external monitor port on the PowerBook.
8
Turn on the external monitor.
9
Press the Power button (®) to turn on or wake your computer.
The external monitor is automatically activated.
10
Click the Resolution icon in the Control Strip and select a resolution from the menu that
appears.
Resolution icon
If you select an external monitor resolution that matches the standard built-in resolution of
your PowerBook display, the same image will appear on both the display and the external
monitor (known as “simulscan” or “video mirroring”). If you choose a different resolution,
the PowerBook display will go dark and images will appear only on the external monitor. For
more information on the external monitor resolutions supported by your PowerBook, see
the Technical Information booklet that came with your computer.
Video mirroring works only with the PowerBook display’s standard resolution.
For example, when the 12.1" display is set to its standard resolution (800 x 600) or the 14.1"
display is set to its standard resolution (1024 x 768), the display can mirror the external
monitor. However, if you switch the resolution to 640 x 480, the built-in display will go dark
because scaled resolutions cannot be used for video mirroring.
Important
Connecting Additional Equipment
65
Trouble With the External Monitor?
m
Nothing happened when you tried to turn on or wake the PowerBook.
Make sure that all your equipment is connected properly. Then try turning on or waking
the computer again.
Make sure that the battery is charged, or that the power adapter is plugged into both the
computer and an electrical outlet. If you are using a power strip, make sure it is turned
on.
m
The computer is on, but the external monitor is dark.
Make sure that the monitor’s power cord is connected and that its power switch is on. Try
adjusting the monitor’s brightness and contrast settings. If this doesn’t work, try
restarting your computer.
Note: The screen-dimming feature in the Energy Saver control panel turns the screen
brightness down to a low level when you haven’t used the computer for a few minutes.
( You can think of dimming as display sleep.) Dimming also affects the external monitor.
When you move your finger on the trackpad or press a key on the keyboard, the
brightness is restored on both screens. For information and instructions on setting screen
dimming, see the online help, available in the Help menu.
m
The PowerBook goes to sleep when you close the display.
The PowerBook display must be open when using an external monitor.
Disconnecting an External Monitor
66
Chapter 3
1
Make sure your computer is shut down or in sleep.
2
Make sure your monitor is switched off.
3
Disconnect the monitor cable (for a VGA-style monitor) or monitor adapter (for an Apple
monitor) from the external monitor port on the computer’s back panel.
Using an External Video Display or Recording Device
Your PowerBook has an S-video output port (labeled with the Æ icon) where you can
connect an external video display or recording device such as a television, videocassette
recorder ( VCR), or video projection system.
Note: Due to the display limitations of most televisions, images displayed on the television
screen will be of lower quality than images on the built-in display or an external monitor. For
best results, always use an S-video connection when available.
Using the S-video output port, you can display your PowerBook desktop on a television
screen and record images from the desktop to a VCR.
-
√
¯
V
´
G
g
Æ
™
Æ S-video output port
The S-video output port (labeled with the Æ icon) looks similar to the ADB
port (labeled with the V icon) and the printer/modem port (labeled with the ´ icon).
Only plug your S-video device into the S-video output port. Plugging a video device into
the wrong port could damage your equipment.
Warning
PowerBook computers equipped with an S-video output port can output the following
display formats:
m S-video: High-quality video format used by certain televisions, VCRs, and video
projectors. You can connect a cable from an S-video device directly to the S-video output
port (Æ) on the back panel of your PowerBook. S-video is recommended because it
provides better quality.
m Composite video: Video format used by most televisions and VCRs. To connect a
composite video device, you need to use the composite to S-video adapter that came with
your PowerBook.
RCA plug
S-video plug
Composite to S-video adapter
Connecting Additional Equipment
67
Connecting Video Equipment to Your PowerBook
You can record and deliver a sophisticated presentation by combining the video and sound
capabilities of your PowerBook. The steps that follow explain how to set up equipment for
displaying the computer desktop on a television and recording the computer’s output to
videotape. Use the information in this section as a guideline when connecting other external
video display and recording devices.
Note: You cannot use the S-video output port and the external monitor port at the same
time.
To connect a television or VCR for output from the computer:
1
Shut down your PowerBook and turn off the television or VCR.
2
Attach one end of a video cable (not included with your PowerBook) to the video in port on
the television or VCR. Follow the directions that came with the television or VCR.
S-video cable (not included with your computer)
RCA-type cable (not included with your computer)
3
If you’re using an RCA-type cable, plug in the other end of the video cable to the composite
to S-video adapter. If you’re using a device that supports S-video, skip this step.
4
Plug the S-video cable or adapter to the S-video output port (Æ) on the back panel of your
PowerBook.
If the connector doesn’t slide easily into the port, check the pin alignment and
try again. Don’t use force, which could damage your equipment.
Important
PowerBook connected to a television using an S-video cable
Æ S-video
S-video In port
output port
TV
S-video cable
68
Chapter 3
PowerBook connected to a television using an RCA-type cable
Æ S-video
output port
RCA In port
TV
Composite to S-video adapter
5
RCA-type cable
If you want to output sound as well as video from your PowerBook, use a
dual-RCA-plug–to–stereo-miniplug cable (not included with your computer) to connect the
sound output port on the back of your PowerBook to audio input ports on your television or
VCR.
Dual-RCA-plug–to–stereo-miniplug cable
(not included with your computer)
6
Turn on the computer and the television or VCR.
Your PowerBook starts up using the built-in display. The television is dark.
7
Click the Resolution icon in the Control Strip and select a NTSC or PAL compatible screen
resolution from the menu that appears. For best results use 640 x 480, 60 Hz for NTSC
systems and 640 x 480, 50 Hz for PAL systems.
Resolution icon
The PowerBook display becomes dark and images appear on the television.
8
To switch back to your PowerBook display, select the “built-in” resolution for your
PowerBook from the Control Strip.
Connecting Additional Equipment
69
Trouble With the External Video Device?
m
Nothing happens when you tried to turn on the PowerBook.
Make sure your equipment is connected properly. Then try pressing the Power button
(®) again.
Make sure the battery is charged, or the power adapter is plugged into both the computer
and an electrical outlet. If you are using a power strip, make sure it is turned on.
m
The computer is on, but the television is dark.
Select an NTSC or PAL compatible resolution from the Resolution icon in the Control
Strip. If the television is still dark, make sure that the television is on and set up to receive
video from an outside source. See the manual that came with your television or other
video device for more information. If this doesn’t work, try restarting your computer.
Note: The screen-dimming feature in the Energy Saver control panel turns the screen
brightness down to a low level when you haven’t used the computer for a few minutes.
Dimming also affects the television. When you move your finger on the trackpad or press
a key on the keyboard, the brightness is restored on both screens. For information on
screen dimming, see the online help, available in the Help menu.
Disconnecting an External Video Device
70
Chapter 3
1
Make sure your computer is shut down or in sleep.
2
Make sure your television or other external video device is switched off.
3
Disconnect the S-video cable or S-video adapter from the S-video output port (Æ) on the
computer’s back panel.
Connecting and Using Sound Input Devices
Your computer has a built-in microphone. In addition, you can connect a PlainTalk
microphone to the external sound input port (√). ( You can also connect a standard linelevel input microphone, although it is not suitable for speech recognition.) You can find
more information on using the microphone to record sounds in the online help, available in
the Help menu.
-
√
¯
V
´
G
g
Æ
™
√ Sound input port
- Sound output port
Note: When using an external microphone, set the volume to 50 percent and point the
microphone away from the PowerBook speakers. Pointing the microphone towards the
speakers with the volume set to maximum may result in feedback.
Because your PowerBook can receive sounds from a variety of different sources, such as the
internal microphone, expansion bay module, or zoomed video card, you need to select a
sound input source.
m Click the Sound Source icon in the Control Strip and choose an input source from the
menu that appears.
Sound Source icon
Connecting Additional Equipment
71
Connecting Sound Output Devices
The Macintosh PowerBook has a stereo sound output port (-) to which you can connect
externally powered speakers, an amplifier, headphones, or other audio output device. The
sound output port accepts a standard stereo miniplug, like that used to attach headphones
to a portable tape or CD player.
Your computer also has two stereo speakers, which play sound from the following sources:
audio CD in the CD-ROM or DVD-ROM drive, external stereo device connected to the
computer through the sound input port, zoomed video card, internal modem, or file on your
hard disk.
The computer automatically selects the sound output source. If an external device, such as a
pair of headphones, is connected, sound is routed there. If no external output device is
connected, sound plays through the computer’s speakers.
Locking Your Computer
You can purchase a security cable and lock to protect your Macintosh PowerBook. With a
lock, you can secure your computer to a desk or table. See your Apple-authorized dealer or
computer retailer for details on security devices.
A security locking cable does not prevent the removal of expansion bay
modules or batteries or access to your RAM and hard disk.
Important
Sample locking device
with security cable
Ç Security slot
Note: You can protect the contents of your hard disk by turning on password protection.
You can find more information on password security in the online help, available in the Help
menu.
72
Chapter 3
Connecting a Mouse, Keyboard, or Other ADB Device
You can connect a mouse, keyboard, graphics tablet, or other Apple Desktop Bus (ADB)
device to the ADB port on the back panel of the PowerBook.
-
√
¯
V
´
G
g
Æ
™
V Apple Desktop Bus (ADB) port
Note: You may experience a slight delay if you connect a mouse or other ADB device while
the computer is turned on.
Connecting Other Devices
For instructions on connecting a device not discussed in this chapter, refer to the
documentation that came with the device.
Connecting Additional Equipment
73
C H A P T E R
4
4
Installing a RAM Expansion Card
and Removing Your Hard Disk
This chapter provides information about installing a RAM expansion card and removing your
PowerBook hard disk for service or security reasons.
To avoid damage to your computer, Apple recommends that only an Applecertified technician install additional RAM. Consult the service and support information
that came with your Apple product for instructions on how to contact an Appleauthorized service provider or Apple for service. If you attempt to install additional RAM
yourself, any damage you may cause to your equipment will not be covered by the limited
warranty on your computer. See an Apple-authorized dealer or service provider for
additional information about this or any other warranty question.
Warning
Getting Ready
Before you open your computer, you need to make sure that you have a Phillips or a Torx T-8
screwdriver (available from a hardware or electronics supply store).
Removing the Keyboard and Internal Heat Sink
The design of your Macintosh PowerBook allows you to easily access the internal
components of the computer by removing the keyboard. The steps in this section explain
how to remove the PowerBook keyboard and internal heat sink to access the RAM expansion
slot and internal hard disk.
1
Place your PowerBook on a hard, flat surface.
75
2
If your PowerBook is turned on, press the Power button (®). In the Shut Down dialog box,
click Shut Down.
The internal components (including the internal heat sink) of your PowerBook
may be hot. If you have been using your PowerBook, wait 10 minutes before continuing,
to let the internal components cool down.
Warning
3
Unplug the power adapter and any other devices from the back of your PowerBook. Unplug
any phone line from the internal modem.
4
Adjust your display so that it is at a 90-degree angle to the computer.
90 o
If your display is tilted too far back, your PowerBook may tip backward when the expansion
bay modules are removed in the next step.
76
Chapter 4
5
Pull out both expansion bay release levers to eject the modules or batteries in both the
expansion bays.
6
Remove the modules or batteries from both the expansion bays.
7
With your thumbs positioned slightly below the keyboard, place your fingers inside the
expansion bays and locate the small plastic tabs that hold the keyboard in place.
The plastic tabs have small ridges on them and are located on the underside of the top shell
of the PowerBook approximately one inch inside each expansion bay.
Plastic tab
Plastic tab
8
Gently slide the plastic tabs toward you until you see the lower portion of the keyboard pop
up.
9
Lift the lower portion of the PowerBook keyboard up slightly and pull it back enough to
displace the five metal tabs that hold the front of the keyboard in place.
Tabs
Installing a RAM Expansion Card and Removing Your Hard Disk
77
10
Flip the keyboard over and lay it on the palm rests and trackpad.
11
Remove the two screws that secure the internal heat sink (using a Phillips or Torx T-8
screwdriver) and then lift it up by pulling on the small metal tab.
The PowerBook internal heat sink may be hot. If you have been using your
PowerBook, wait 10 minutes before continuing to let the internal components cool down.
Warning
Screws
Heat sink
Small metal tab
You now have access to the internal components of your PowerBook.
78
Chapter 4
Installing a RAM Expansion Card
To install a RAM expansion card in your PowerBook, follow these steps:
Make sure that the RAM expansion card you are installing is made for your
Macintosh PowerBook model. Components designed for other PowerBook models will not
work with your computer.
Important
1
If you have not already done so, remove the PowerBook keyboard and internal heat sink as
described in “Removing the Keyboard and Internal Heat Sink” on page 75.
2
Locate the empty RAM expansion slot.
Note: If you ordered your PowerBook with additional memory, this slot may already have a
RAM card installed.
RAM expansion slot
3
Gently touch the metal surface on the right side of the inside of the computer to discharge
any static electricity built up on your body.
This prevents damage to your Macintosh PowerBook or RAM card.
Metal portion
Don’t walk around while installing the card. If you do, touch the metal surface again to
discharge any static electricity.
Installing a RAM Expansion Card and Removing Your Hard Disk
79
4
Position the RAM expansion card at a 30-degree angle. Line up the notch in the PowerBook
RAM expansion card with the small tab in the RAM expansion slot.
30 o
5
Push the RAM expansion card into the plastic expansion slot.
You may feel some resistance. If you are having trouble inserting the card, try pushing one
side at a time.
6
Gently push the RAM expansion card down until the two snaps on either side of the card
lock into place.
Snap
Your RAM expansion card is now ready to use.
7
80
Chapter 4
Skip ahead to “Replacing the Keyboard and Internal Heat Sink” on page 83.
Removing Your PowerBook Hard Disk Drive
Your PowerBook was designed so that you could easily remove your internal hard disk drive
for service or security needs.
1
If you have not already done so, remove the PowerBook keyboard and internal heat sink as
described in “Removing the Keyboard and Internal Heat Sink” on page 75.
2
Locate the hard disk drive.
Hard disk drive
3
Gently touch the metal surface on the left side of the inside of the computer to discharge any
static electricity built up on your body.
This prevents damage to the Macintosh PowerBook or internal hard disk drive.
Metal portion of
processor cage
Don’t walk around while removing the hard disk drive. If you do, make sure you touch the
metal surface again to discharge any static electricity.
Installing a RAM Expansion Card and Removing Your Hard Disk
81
4
Loosen the screw that locks the hard disk in place.
Note: The hard disk screw stays attached to the hard disk; you do not need to remove it
completely.
Hard disk screw
5
Gently pull up on the small metal tab (located on the left side of the hard disk) to disengage
the hard disk from the logic board.
6
Carefully lift the hard disk out of the PowerBook.
Always store your internal hard disk in a safe place and avoid contact with the hard disk
connectors.
82
Chapter 4
Replacing the Keyboard and Internal Heat Sink
Follow the steps in this section to replace your PowerBook keyboard.
1
Insert the internal heat sink and replace the two screws to secure it in place.
Screws
2
Press down on the bottom portion of the heat sink to secure it into place.
3
Flip the keyboard back on top of the opening in your PowerBook.
4
Insert the five small tabs at the top of the keyboard into the opening in the PowerBook case.
Tabs
5
Press down on the lower portion of the keyboard until it snaps into place.
6
Replace the expansion bay modules.
Installing a RAM Expansion Card and Removing Your Hard Disk
83
You are now ready to start working with your PowerBook again.
Never turn on your PowerBook G3 Series computer unless all of its internal
and external parts are in place. Operating the computer when it is open or missing parts
can be dangerous, and can damage your computer.
Warning
84
Chapter 4
A P P E N D I X
Health, Safety, and Maintenance Tips
Health-Related Information About Computer Use
Muscle soreness, eye fatigue, and other discomforts and injuries sometimes associated with
using computers can occur from performing any number of activities. In fact, misuse of the
same muscles during multiple activities can create a problem that might not otherwise exist.
For example, if you engage in nonwork activities that involve repetitive stress on the wrist—
such as bicycling—and also use your computer’s keyboard improperly, you may increase your
likelihood of developing wrist problems. Some individuals are at greater risk of developing
these problems because of their health, physiology, lifestyle, and general exposure to stress.
Work organization and conditions, such as workstation setup and lighting, also play a part in
your overall health and comfort. Preventing health problems is a multifaceted task that
requires careful attention to the way you use your body every hour of every day.
The most common health effects associated with using a computer are musculoskeletal
discomfort and eye fatigue. We’ll discuss each area of concern in this appendix.
Musculoskeletal Discomfort
As with any activity that involves sitting for long periods of time, using a computer can make
your muscles sore and stiff. To minimize these effects, set up your work environment
carefully, using the guidelines that follow, and take frequent breaks to rest tired muscles. To
make working with your computer more comfortable, allow enough space in your work area
so that you can change position frequently and maintain a relaxed posture.
Another type of musculoskeletal concern is repetitive stress injuries (RSIs), also known as
cumulative trauma disorders (CTDs). These problems can occur when a certain muscle or
tendon is repeatedly overused and forced into an unnatural position. The exact causes of
RSIs are not totally understood, but in addition to awkward posture, such factors as the
amount of repetition, the force used in the activity, the individual’s physiology, workplace
stress level, and lifestyle may affect the likelihood of experiencing an RSI.
85
RSIs did not suddenly arise when computers were invented; tennis elbow and writer’s cramp,
for example, are two RSIs that have been with us for a long time. Although less common than
other RSIs, one serious RSI discussed more often today is a wrist problem called carpal
tunnel syndrome, which may be aggravated by improper use of computer keyboards. This
nerve disorder results from excessive pressure on the median nerve as it passes through the
wrist to the hand.
This section offers advice on setting up your work area to enhance your comfort while you
use your computer. Since the effects of repetitive movements associated with using a
computer can be compounded by those of other work and leisure activities to produce or
aggravate physical problems, proper use of your computer system must be considered as just
one element of a healthy lifestyle.
No one, of course, can guarantee that you won’t have problems even when you follow the
most expert advice on using computer equipment. You should always check with a qualified
health specialist if muscle, joint, or eye problems occur.
Eye Fatigue
Eye fatigue can occur whenever the eyes are focused on a nearby object for a long time. This
problem occurs because the eye muscles must work harder to view an object that’s closer
than about 20 feet (6 meters). Improper lighting can hasten the development of eye fatigue.
Although eye fatigue is annoying, there’s no evidence that it leads to permanent damage.
Whenever you’re engaged in an activity that involves close-up work—such as reading a
magazine, doing craft work, or using a computer—be sure to have sufficient glare-free
lighting and give your eyes frequent rest breaks by looking up and focusing on distant
objects. Remember to have your eyes examined regularly.
To prevent discomfort and eye fatigue:
m Arrange your work space so that the furniture is properly adjusted for you and doesn’t
contribute to an awkward working posture.
m Take frequent short breaks to give your muscles and eyes a chance to rest.
86
Appendix
Arranging Your Work Area and Equipment
The suggestions in this section can help you work more comfortably with you computer.
Chair
m An adjustable chair that provides firm, comfortable support is best. Adjust the height of
the chair so your thighs are horizontal and your feet flat on the floor.
The back of the chair should support your lower back (lumbar region). Follow the
manufacturer’s instructions for adjusting the backrest to fit your body properly.
Keyboard and Trackpad
m When you use the keyboard and trackpad, your shoulders should be relaxed. Your upper
arm and forearm should form an approximate right angle, with your wrist and hand in
roughly a straight line.
This
Not this
m You may have to raise your chair so your forearms and hands are at the proper angle to
the keyboard. If this makes it impossible to rest your feet flat on the floor, you can use a
footrest with adjustable height and tilt to make up for any gap between the floor and your
feet. Or you may lower the desktop to eliminate the need for a footrest. Another option is
to use a desk with a keyboard tray that’s lower than the regular work surface.
m Use a light touch when typing or using the trackpad and keep your hands and fingers
relaxed. Avoid rolling your thumbs under your palms.
This
Not this
Some computer users may develop discomfort in their hands, wrists, or arms after intensive
work without breaks. If you begin to develop chronic pain or discomfort in your hands,
wrists, or arms, consult a qualified health specialist.
m Change hand positions often to avoid fatigue.
Health, Safety, and Maintenance Tips
87
Mouse
If you use an external mouse, position the mouse at the same height as your keyboard. Allow
adequate space to use the mouse comfortably.
Built-In Display
m Adjust the angle of the display to minimize glare and reflections from overhead lights and
windows.
m You may need to adjust the brightness and contrast of the screen when you take the
computer from one work location to another, or if the lighting in your work area changes.
External Monitor
If you use an external monitor, this suggestion may be helpful.
m If possible, arrange the monitor so the top of the screen is slightly below your eye level
when you’re sitting at the keyboard. The best distance from your eyes to the screen is up
to you, although most people seem to prefer 18 to 28 inches (45 to 70 cm).
Avoiding Fatigue
m Change your seated position, stand up, or stretch whenever you start to feel tired.
Frequent short breaks are helpful in reducing fatigue.
m Allow adequate work space so that you can work comfortably. Place papers or other items
so you can view them easily while using your computer. A document stand may make
reading papers more comfortable.
m Eye muscles must work harder to focus on nearby objects. Occasionally focus your eyes
on a distant object, and blink often while you work.
m Clean your screen regularly. Keeping the screen clean helps reduce unwanted reflections.
What About Electromagnetic Emissions?
There has been recent public discussion of the possible health effects of prolonged exposure
to extremely low frequency (ELF) and very low frequency (VLF) electromagnetic fields. Such
fields are associated with electromagnetic sources such as television sets, electrical wiring,
and some household appliances—as well as computer monitors.
Apple has reviewed scientific reports and sought the counsel of government regulatory
agencies and respected health organizations. Based on the prevailing evidence and opinions,
Apple believes that the electric and magnetic fields produced by computer monitors do not
pose a health risk. In response to those customers who wish to reduce their exposure to
electromagnetic fields, Apple has lowered the emission levels of its products.
88
Appendix
Important Care and Safety Instructions
For your own safety and that of your equipment, always take the following precautions.
Disconnect the power plug (by pulling the plug, not the cord) and remove the expansion bay
battery if any of the following conditions exists:
m you want to remove any parts (leave the cord disconnected as long as the keyboard is
open)
m the power cord or plug becomes frayed or otherwise damaged
m you spill something into the case
m your PowerBook G3 Series computer is exposed to rain or any other excess moisture
m your PowerBook G3 Series computer has been dropped or the case has been otherwise
damaged
m you suspect that your PowerBook G3 Series computer needs service or repair
m you want to clean the case (use only the recommended procedure described later)
The only way to disconnect power completely is to unplug the power cord and
remove the batteries. Make sure at least one end of the power cord is within easy reach so
that you can unplug the PowerBook G3 Series computer when you need to.
Important
Be sure that you always do the following:
m Keep your PowerBook G3 Series computer away from sources of liquids, such as
washbasins, bathtubs, shower stalls, and so on.
m Protect your PowerBook G3 Series computer from dampness or wet weather, such as rain,
snow, and so on.
m Read all the installation instructions carefully before you plug your PowerBook G3 Series
computer into a wall socket.
m Keep these instructions handy for reference by you and others.
m Follow all instructions and warnings dealing with your system.
Electrical equipment may be hazardous if misused. Operation of this product,
or similar products, must always be supervised by an adult. Do not allow children access
to the interior of any electrical product and do not permit them to handle any cables.
Warning
To clean the case, do the following:
1
Disconnect the power plug. (Pull the plug, not the cord.)
2
Wipe the surfaces lightly with a clean, soft cloth dampened with water. Clean the screen with
soft, lint-free paper.
Health, Safety, and Maintenance Tips
89
Caution
m If you have a problem with your computer and nothing in the computer manual solves
the problem, take the computer to your Apple-authorized dealer or service provider.
Attempting to repair the computer yourself may void the limited warranty.
m Do not move the computer when you can hear its hard disk spinning. When you put the
computer to sleep, wait until the screen is blank before moving the computer.
m Never force a connector into a port. Make sure that the connector matches the port and
that it’s right side up. If the connector and port do not join easily, they do not match.
m Do not use the computer in wet or dusty environments.
m Keep dirt and liquids away from the ports on the back panel, the keyboard, and the
trackpad. If you spill any food or liquid onto the computer, shut it down immediately,
unplug it, and remove the expansion bay modules before cleaning up the spill.
Depending on what you spilled and how much got into the computer, you may have to
bring the computer to an Apple-authorized service provider for cleaning.
m Do not touch the screen with any sharp or pointed objects.
m Use only the battery supplied with your computer, or an identical model. Batteries
designed for other portable computers may look similar, but they may not work with your
computer and may damage it.
m Use only the power adapter supplied with your computer, or an identical model. Adapters
designed for other electronic devices may not work with your equipment and may
damage it.
m When using your PowerBook or when charging the battery, it is normal for the bottom of
the case to get warm. The bottom of the PowerBook case functions as a cooling surface
that transfers heat from inside the computer to the cooler air outside. The bottom of the
case is raised slightly to allow airflow that keeps the unit within normal operating
temperatures.
Important
m Use the computer only in environments where the temperature range is between
50°F/10°C and 95°F/35°C.
m Do not expose the computer to very low (less than –13°F/–25°C) or very high (more
than 140°F/60°C) temperatures.
m If the computer has been in a cold place for several hours, let it warm up to room
temperature before you use it.
90
Appendix
Caring for Batteries
m Always handle batteries carefully.
m Do not short-circuit the battery terminals (that is, do not touch both terminals with a
metal object). Do not carry loose batteries in a pocket or purse where they may mix with
coins, keys, or other metal objects. Doing so may cause an explosion or a fire.
m Do not drop, puncture, disassemble, mutilate, or incinerate the battery.
m Recharge batteries only as described in this manual and only in ventilated areas.
m Do not leave batteries in hot locations (such as the trunk of a car) for more than a day or
two. Intense heat can shorten battery life.
m Do not leave a battery in storage for longer than 6 months without recharging it.
Handling Floppy Disks
Store disks at
temperatures
between 50° F
and 125° F.
Do not use a
pencil or an
eraser on a disk
or disk label.
125° F (52° C)
50° F (10° C)
Do not touch the
exposed part of the
disk behind the
metal shutter.
Keep disks away
from magnets.
Health, Safety, and Maintenance Tips
91
Handling CD and DVD Discs
Do not expose discs
to direct sunlight.
Do not write
on discs.
Do not spill liquids
on discs.
Do not put tape
on discs.
Do not scratch
discs.
Do not get
dust on discs.
Traveling With the Macintosh PowerBook
Always bring the system software CD that came with your computer when you travel. If you
experience system software problems while traveling, you may need it to correct any
problems.
Take the necessary plug adapters if you’re traveling overseas. (You may need to use them
with the power cord.) You do not need a voltage transformer. The power adapter can handle
100 volts to 240 volts AC (50 Hz to 60 Hz).
Check the following diagrams to determine which plug adapters you’ll need, or ask your
travel agent.
Outlet Type
Locations
United States, Canada, parts of Latin America, Japan,
Korea, the Philippines, Taiwan
Russia and the Commonwealth of Independent States
(CIS), most of Europe, parts of Latin America, the Middle
East, parts of Africa, Hong Kong, India, most of South Asia
Mexico, United Kingdom, Ireland, Malaysia, Singapore,
parts of Africa
China, Australia, New Zealand
92
Appendix
Airplanes and Airports
Some airlines have reported that use of portable electronic devices may have interfered with
the aircraft’s flight navigation or communications systems. Many airlines restrict or manage
the use of electronic equipment during flights. Please respect the regulations of the airlines.
A properly tuned X-ray machine or metal detector should cause no damage to your
Macintosh PowerBook. But the motors that drive the belts on some security machines have
magnets that can damage your information. To avoid problems, place the Macintosh
PowerBook close to the entrance of the machine and remove it as soon as possible. At most
airports you can also have the computer hand-inspected by security personnel.
Security officials may require you to turn the Macintosh PowerBook on. Make sure you have
a charged battery on hand. To speed up the security process, have your PowerBook in sleep
instead of shut down.
Handling Your Macintosh PowerBook
The safety instructions earlier in this appendix also apply when you are traveling. In addition,
note these precautions:
m Do not transport your Macintosh PowerBook while it is turned on. Put your computer to
sleep or shut it down before you move it.
m Do not check your computer as baggage. Carry it with you.
International Repair and Service
Apple’s limited warranty covers your Macintosh PowerBook for one year, regardless of where
it is purchased. The Apple-authorized service providers in more than 80 countries can handle
most repairs (unless the repair involves a component specific to another area of the world).
Bring a copy of your proof of purchase with you.
Storing the Macintosh PowerBook
1
Save your work on a hard disk or floppy disks.
2
Press the Power button and click Shut Down, or choose Shut Down from the Special menu.
3
Close the display.
4
Store the computer in a cool, dry place.
Storage temperatures should remain between –25°C and 60°C (between –13°F and 140°F).
Avoid leaving the computer where temperatures may be extreme or unpredictable—in the
trunk of a car, for example.
Health, Safety, and Maintenance Tips
93
Service and Support
If your computer is malfunctioning but does not appear to be physically damaged, shut it
down (and leave the power adapter plugged in, if possible) until you can get help.
If you know or suspect that your computer is physically damaged, disconnect the power
adapter, remove the battery, and do not use the computer until it can be repaired.
See the service and support information that came with your computer for
information about customer assistance.
Important
Modem and Fax Safety
If you’re planning to install telephone wiring or telephone jacks, follow these precautions:
m Never install telephone wiring during a lightning storm.
m Never install telephone jacks in wet locations unless the jacks are specifically designed for
wet locations.
m Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
m Use caution when installing or modifying telephone lines.
m Avoid using a telephone, other than a cordless type, during an electrical storm. There may
be a remote risk of shock from lightning.
m Never use a telephone to report a gas leak while in the vicinity of the leak.
Disconnect the telephone line from the PowerBook before removing the
keyboard to access the internal components.
Important
94
Appendix
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement