OWNER`S MANUAL
LIBRATONE
ZIPP
WIFI / BT 4.0
OWNER’S MANUAL
2
INDEX
3 Congratulations
4 FullRoom™
5 AirPlay / Bluetooth / DLNA
6 Introduction
7 Quick AirPlay Setup (Wi-Fi)
8 Quick DLNA Setup
9 Quick Bluetooth Setup
10 Libratone App
11 Factory reset
12 Cover change
13 Battery charging
14 Troubleshooting / Register / Warranty
15 Speaker specs
16 Wi-Fi / Bluetooth specs
3
CONGRATULATIONS!
YOU HAVE TAKEN A LEAP OF FAITH.
A step towards a world of wireless bliss.
It takes a great deal of courage to liberate yourself from the shackles of speaker cables and
ordinary stereo systems.
But you have jumped right into it. FOR THIS WE SALUTE YOU.
We have done everything in our power to make your Libratone sound system as simple and user
friendly as possible. Hopefully this manual will answer any questions you might have.
Thank you for buying our product. Thank you for joining the revolution.
4
FULLROOM™
Libratone Zipp is based on a patented audio technology. We call it FullRoom™ sound.
Allow us to explain:
Regular speakers have closed cabinets. They push the sound waves in one direction - forward.
Libratone Zipp, on the other hand, plays like an acoustic instrument, dispersing sound waves in
multiple directions, giving you a 360° sound experience.
FullRoom™ technology means that you only need one sound source to get a room full of sound.
Whether you place it on a shelf or put it on the table you get the same amazing sound quality.
Placing Libratone Zipp close to a wall will reflect the sound off the wall. This gives you a deeper
bass and an even fuller soundscape. We don’t recommend you place Libratone Zipp in a corner
since this will limit the FullRoom™ experience, but it’s up to you.
5
MUSIC AT HOME
AirPlay is a technology designed by Apple to transmit audio within a Wi-Fi network. Once your
Libratone speaker is connected to your home Wi-Fi, you can stream music via services like Spotify,
Deezer, WiMP, TuneIn, Rdio, iTunes etc. from your iPhone, iPad, iPod touch or computer. This
means that you have your entire music and movie library in the palm of your hand, ready to be set
free.
MUSIC ON THE GO
Bluetooth allows you to wirelessly play music in CD-quality from any iOS, Android or Windows
Phone device to your Libratone speaker. By enabling a direct connection between the audio
source and the speaker, the need for a wireless network is eliminated.
Pairing is easily achieved through NFC on your Android or Windows Phone device or through the
Bluetooth menu on your iOS device.
DLNA
Built-in DLNA technology allows you to stream music to your Libratone speaker from most devices
using Android 4,0 or later, Blackberry OS 10 or later, and computers running Windows 7 or 8.
For more info go to www.libratone.com/dlna
6
INTRODUCTION
7
QUICK AIRPLAY SETUP
8
QUICK DLNA SETUP
9
QUICK BLUETOOTH SETUP
10
LIBRATONE APP
Add another dimension to your Libratone Diva
by downloading the free Libratone app from the
Apple App Store to your iOS device.
The Libratone app keeps your speaker firmware
up to date and allows you to customize the
sound to your taste in music and acoustic
surroundings, enhancing the FullRoom™
experience.
The Libratone app is also available for Android.
11
FACTORY RESET
To clear all speaker settings on your Libratone Zipp you need to perform a factory reset.
•
•
Press and hold the “Bluetooth Button”, the “AirPlay Button” and the “Logo Button”
simultaneously until the “Status Indicator” starts blinking WHITE or BLUE, then release
the buttons.
When the “Status Indicator” shows a WHITE or BLUE sequence after approx. 20 seconds,
your speaker has been factory reset and is ready for setup.
12
COVER CHANGE
Zipp comes in Libratone's signature Pepper Black. Extra covers are sold separately in a range of
colors to suit all tastes and complement any kind of interior. Shop online at www.libratone.com.
When changing the speaker cover "gentle is the name of the game".
Place the speaker on your lap and unzip the cover. Turn the handle upwards and gently pull down
the cover around the connector panel towards the speaker bottom. Unhook the cover from the
bottom of the connector panel and loosen the cover from the top of the connector panel. Remove
the wool cover from the speaker by leading the handle through the hole.
To dress the speaker again, follow the above steps backwards.
Please find the cover change video at our support page: www.libratone.com/ZippCover
13
BATTERY CHARGING
Connect the power adapter into a working electrical outlet.
Plug in the other end of the power adapter into the bottom of your Libratone Zipp speaker.
The “Battery Indicator” will start pulsating green. Leave it connected to mains until the “Battery
Indicator” light turns solid green, indicating that it is fully charged. A full charge takes
approximately 1½-2 hours.
14
TROUBLESHOOTING
Our hearts and souls are in your Libratone Zipp. However, if it’s acting up and you can’t find your
answer here, please visit our support page at:
www.libratone.com/support
REGISTER
To help us give you the best service possible, we encourage you to register your product at:
www.libratone.com/free-cover
WARRANTY
Don’t worry. Your Libratone Zipp is covered by our warranty. Since the warranty follows national
laws, it differs from country to country. For warranty information regarding your country please visit:
www.libratone.com/warranty
Warranty information is occasionally printed on your invoice as well.
15
SPEAKER SPECS - LIBRATONE ZIPP WIFI / BT 4.0 (LT-310)
DRIVE UNITS
1x4” bass and 2x1” ribbon based tweeter.
TECHNOLOGY
Wireless active speaker with built-in Digital
Signal Processing and Digital Amplification.
Implements Libratone patent pending
FullRoom™ acoustic technology for
exceptional sound performance.
WIRELESS
AirPlay lets you stream audio wirelessly from
your iPad (3rd generation), iPad 2, iPad,
iPhone 6 and 6 plus, iPhone 5, iPhone 4S,
iPhone 4, iPhone 3GS, iPod touch (5th, 4th
and 3rd generations) with iOS 4.3.3 and
iTunes 10.2.2 (Mac and PC) or later. DLNA
lets you stream audio from most
Android devices running 4.0 or later.
INPUTS
AirPlay, Bluetooth, DLNA, USB audio (iPod,
iPhone and iPad) and 3.5 mm audio minijack
for analog sound. Spotify Music and QQ
Music.
AMPLIFIER
60W total. 2.1 Stereo system with FullRoom
DSP optimization and Full Digital Amplification.
ACOUSTIC PERFORMANCE
Frequency range: 60-20.000 Hz.
Max. output: 96 dB SPL/ 1m.
POWER
100-240 Volt AC, 50/60Hz.
Power consumption 40W external charger.
BATTERY PLAYING TIME
Up to 8 hours wired, up to 4 hours wireless
DIMENSIONS
H: 26.0 cm. Ø: 12.2 cm
H: 10.2 inch. Ø: 4.8 inch
WEIGHT
1.8 kg. / 4 pounds.
16
WI-FI SPECS - LIBRATONE ZIPP WIFI / BT 4.0 (LT-310)
WLAN STANDARDS
IEEE 802.11b, IEEE 802.11g.
POWER-ON RAMP
< 2us
FREQUENCY BAND
2.412 – 2.472 GHz (2.4GHz ISM Band, 13
Channels),
Channel 1 - Channel 13,
North America FCC, Japan Telec, Europe
ETSI
RF CARRIER SUPPRESSION
< 15dBc
MODULATION
802.11b mode (DS-SS: IEEE 802.11b)
802.11g mode (OFDM: IEEE 802.11g)
RX SENSITIVITY
802.11b mode: <=-82dBm @ 1Mbps, <=81dBm
@ 2Mbps, <=-81dBm @ 5.5Mbps, <=-78dBm
@ 11Mbps
TRANSMISSION SPEED
802.11b mode: 11Mbps, 5.5Mbps, 2Mbps,
1Mbps
802.11g mode: 54Mbps, 48Mbps, 36Mbps,
24Mbps, 18Mbps, 12Mbps, 9Mbps, 6Mbps
TX EVM
802.11b mode: <-22dB.
802.11g mode: <-25dB
802.11g mode: <=-82dBm @ 9Mbps, <=81dBm @ 18Mbps, <=-75dBm @ 36Mbps, <=70dBm @ 54Mbps
TX POWER
802.11b mode: 16.5dBm, +/-1dB
802.11g mode: 15.0dBm, +/-1dB
BLUETOOTH SPECS
FREQUENCY BAND
2,402 MHz to 2,480 MHz
OPERATING RANGE
Approx. 10m
MODULATION
8 DPSK, PI/4 DQPSK, GFSK
RF SENSITIVITY
0.1% BER at -88dBm
MAXIMUM DATA RATE
3Mbps (typical 1.6Mbps)
TRANSMIT POWER
BER/EDR Class2 4dBm, BLE 10dBm
<
<
17
18
LIBERTY
LIBRATONE
DIFFERENT SPELLING. SAME MEANING.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement