ThinkPad X1 Carbon
Product environmental attributes – THE ECO DECLARATION
The declaration may be published only when all rows and/or fields marked with an * are filled-in (n.a. for not applicable).
Additional information regarding each item may be found under P14.
Brand *
Company name *
Contact information *
Internet site *
Additional information
ThinkPad
Logo
Lenovo
Lenovo Global Environmental Affairs
Alvin L Carter
1009 Think Place
Building 2 / 5F1
Morrisville, North Carolina 27560
[email protected]
http://www.lenovo.com/social_responsibility/us/en/environment.html
The latest version of this document can be found at
http://www.lenovo.com/social_responsibility/us/en/datasheets_notebooks.html
The company declares (based on product specification or test results based obtained from sample testing), that the product
conforms to the statements given in this declaration.
Type of product *
Notebook PC
Commercial name *
ThinkPad X1 Carbon
Model number *
M/T: 3443/3444/3446/3448/3460/3462/3463
Issue date *
Intended market *
Additional information
2014, June 17
Global
Europe
Asia, Pacific & Japan
Americas
Other
This is an uncontrolled copy when in printed form. Please refer to the contact information for the latest version.
Quality Control
Item
QC1 *
QC2 *
Requirement met
Yes
No
The company enforces an internal quality control scheme to ensure the correctness of this eco declaration
The company is a member of an eco declaration system that enforces regular independent quality control
such as organized by IT-Företagen (see www.itecodeclaration.org).
Annex B of ECMA-370 4th edition, June 2009
Page 1 (9)
Model number *
ThinkPad X1 Carbon
M/T: 3443/3444/3446/3448/3460/3462/3463
Issue date *
2014, June 17
Logo
Product environmental attributes - Legal requirements
Item
P1
P1.1*
P1.2*
P1.3*
P1.4*
P1.5*
P1.6*
P1.7*
P1.8*
P1.9*
P1.10*
P2
P2.1*
P2.2*
P2.3*
P3
P3.1*
P3.2*
P3.3*
P3.4*
P4
P4.1*
P4.2*
P4.3*
P5
P5.1*
P5.2*
P5.3*
Requirement met
Yes
No
n.a.
Hazardous substances and preparations
Products do not contain more than; 0.1% lead, 0.01% cadmium, 0.1% mercury, 0.1% hexavalent
chromium, 0.1% polybrominated biphenyls (PBB) or 0.1% polybrominated diphenyl ethers (PBDE). (See
legal reference and Note B1)
Products do not contain Asbestos (see legal reference).
Comment: Legal reference has no maximum concentration value.
Products do not contain Ozone Depleting Substances: Chlorofluorocarbons (CFC),
hydrobromofluorocarbons (HBFC), hydrochlorofluorcarbons (HCFC), Halons, carbontetrachloride, 1,1,1trichloroethane, methyl bromide (see legal reference). Comment: Legal reference has no maximum
concentration values.
Products do not contain more than; 0.005% polychlorinated biphenyl (PCB), 0.005% polychlorinated
terphenyl (PCT) in preparations (see legal reference).
Products do not contain more than 0.1% short chain chloroparaffins (SCCP) with 10-13 carbon atoms in
the chain containing at least 48% per mass of chlorine in the SCCP (see legal reference).
Textile and leather parts with direct skin contact do not contain Tri-(2,3,-dibromopropyl)-phosphate (TRIS),
Tris-(aziridinyl)-phosphineoxide (TEPA), polybrominated biphenyl (PBB) (see legal reference).
Comment: Legal reference has no maximum concentration values.
Textile and leather parts with direct skin contact do not contain more than 0.003% Azo colorants that split
aromatic amines. (See legal reference and Note B1)
Wooden parts do not contain arsenic and chromium as a wood preservation treatment as well as
pentachlorophenol and derivatives (see legal reference).
Comment: Legal reference has no maximum concentration values.
Parts with direct and prolonged skin contact do not release nickel in concentrations above 0.5
microgram/cm2/week (see legal reference).
Comment: Max limit in legal reference when tested according to EN1811:1998.
REACH Article 33 information about substances in articles is available at (add URL or mail contact):
http://www.lenovo.com/social_responsibility/us/en/environment.html
Batteries
If the product contains a battery or an accumulator, it is labeled with the disposal symbol and if it contains
more than 0.0005% of mercury (for button cells only) by weight, or more than 0.004% of lead, it shall be
marked with the chemical symbol for the metal concerned, Hg or Pb. Information on proper disposal is
provided in user manual. (See legal reference)
Button cells used in the product do not contain more than 2% by weight of mercury. Other batteries or
accumulators do not contain more than 0.0005% of mercury or 0.002% of cadmium. (See legal reference)
Batteries and accumulators are easily removable by either users or service providers (as dependent on the
design of the product). Exception: Batteries that are permanently installed for safety, performance, medical
or data integrity reasons do not have to be “easily removable”. (See legal reference)
Safety, EMC connection to the telephone network and labeling
The product complies with legally required safety standards as specified (see legal reference).
The product complies with legally required standards for electromagnetic compatibility (see legal
reference).
If product is intended for connection to a public telecom network or contains a radio transmitter, it complies
with legally required standards for radio and telecommunication devices (see legal reference).
The product is labeled to show conformance with applicable legal requirements (see legal reference).
Consumable materials
If a photo conductor (drum, belt etc.) is used in the product, it does not contain cadmium max 0.01% (see
legal reference and Note B1).
If ink/toner is used in the product, it does not contain cadmium max 0.1% by weight (see legal reference).
If the ink/toner formulation/preparation is classified as hazardous according to applicable regulations, the
product/packaging is adequately labeled and a Safety Data Sheet (SDS) in accordance with these
requirements is available (see legal reference).
Product packaging
Packaging and packaging components do not contain more than 0.01% lead, mercury, cadmium and
hexavalent chromium by weight of these together.
Plastic packaging material is marked according to ISO 11469 referring ISO 1043 (see legal reference).
The product packaging material is free from ozone depleting substances as specified in the Montreal
Protocol (see legal reference).
Comment: Legal reference has no maximum concentration values.
Note B1: Restriction applies to the homogeneous material, unless other specified and expressed in weight %.
A n n e x B o f E C MA - 3 7 0 4 t h e d i t i o n , J u n e 2 0 0 9
Page 2 (9)
Model number *
ThinkPad X1 Carbon
M/T: 3443/3444/3446/3448/3460/3462/3463
Issue date *
2014, June 17
Logo
Product environmental attributes - Market requirements - Environmental conscious design
Item
P6
P6.1*
*=mandatory to fill in. Additional information regarding each item may be found under P14.
Treatment information
Information for recyclers/treatment facilities is available (see legal reference).
P7
P7.1*
Design
Disassembly, recycling
Parts that have to be treated separately are easily separable
P7.2*
Plastic materials in covers/housing have no surface coating.
P7.3*
Plastic parts >100g consist of one material or of easily separable materials.
P7.4*
Plastic parts >25g have material codes according to ISO 11469 referring ISO 1043.
Requirement met
P7.5
Plastic parts are free from metal inlays or have inlays that can be removed with commonly available tools.
P7.6*
Labels are easily separable. (This requirement does not apply to safety/regulatory labels).
P7.7*
Product lifetime
Upgrading can be done e.g. with processor, memory, cards or drives
P7.8*
Upgrading can be done using commonly available tools
P7.9.
Spare parts are available after end of production for: 5 years
P7.10
P7.12
Service is available after end of production for: 5 years
Material and substance requirements
Product cover/housing material type:
Material type: PC+ABS-FR(40)
Material type:
Electrical cable insulation materials of power cables are PVC free.
P7.13
Electrical cable insulation materials of signal cables are PVC free
P7.14
All cover/housing plastic parts >25g are free from chlorine and bromine.
P7.15
All printed circuit boards (without components) >25g are halogen free. as defined in IEC61249-2-21. (See
Note B2)
Flame retarded plastic parts >25g in covers / housings are marked according ISO 1043-4:
Marking: FR(40)
Alt. 1
Chemical specifications of flame retardants in printed circuit boards >25g (without components):
TBBPA (additive)
, TBBPA (reactive)
, Other
; chemical name: DOPO(9,10-dihydro-9-oxa-10phosphaphenanthrene-10-oxide), CAS #: 35948-25-5
P7.11*
P7.16
P7.17
P7.18
P7.19
Yes
No
n.a.
Material type:
Alt. 2
Chemical specifications of flame retardants in printed circuit boards (without components) >25g according
ISO 1043-4: FR(40)
Alt. 1
Flame retarded plastic parts >25g contain the following flame retardant substances/preparations in
concentrations above 0.1%:
Comment: No legal limits exist, this is a market requirement.
Provide a list of all used flame retardants including MSDS for each flame retardant. The list must contain
complete chemical name, CAS number and supplier.
, CAS #:
, Supplier:
1. Chemical name:
2. Chemical name:
, CAS #:
, Supplier:
3. Chemical name:
, CAS #:
, Supplier:
Alt. 2
Chemical specifications of flame retardants in plastic parts >25g according ISO 1043-4:FR(40)
Plastic parts >25g are free from flame retardant substances/ preparations above 0.1% classified as R45,
R40, R46, R48, R50, R51, R53, R60, R61 and any combination of these (See Note B3)
P7.20
Of total plastic parts’ weight >25g, recycled material content is 0 %. (Assessment is about main computer parts only.
P7.21
P7.22
Of total plastic parts’ weight >25g, biobased material content is 0 %.
Light sources are free from mercury
P8
P8.1*
Batteries
Battery chemical composition: Lithium Ion/Lithium Manganese Dioxide
P8.2
Batteries meet the requirements of the following voluntary program/s: US Call2Recycle, EPBA, JBRC
Battery, AC adapter, Cords, Drives, Keyboard, LCD, and misc parts not included.)
Note B2: IEC61249-2--21 has maximum limits for chlorine and bromine but does not address fluorine, iodine and astatine
which are included in the group of halogens.
Note B3: 'Starting from January 2009, Risk phrases can be replaced by Hazard phrases according to the Globally
Harmonized System (GHS), mandatory by December 2010.
A n n e x B o f E C MA - 3 7 0 4 t h e d i t i o n , J u n e 2 0 0 9
Page 3 (9)
Model number *
ThinkPad X1 Carbon
M/T: 3443/3444/3446/3448/3460/3462/3463
Issue date *
2014, June 17
Logo
Product environmental attributes - Market requirements (continued)
Item
P9
9.1
Requirement met
Yes
No
n.a.
Energy consumption
For the product the following power levels or energy consumptions are reported: See P14
The product is shipped w/ WOL Enabled.
Energy mode *
Power level at Power level at Power level at Reference / Standard for energy modes and test
method *
100 V AC
115 V AC
230 V AC
Peak (On-max)
90 W
90 W
90 W
Full load
Short Idle - WOL Enabled
8.832 W
8.412 W
8.496 W
Use for Energy Star V6 registration(PSHORT_IDLE)
Long Idle - WOL Enabled
5.580 W
5.028 W
6.168 W
Use for Energy Star V6 registration(PLONG_IDLE)
Sleep (S3) - WOL Enabled
1.524 W
1.536 W
1.572 W
Use for Energy Star V6 registration(PSLEEP)
Sleep (S3) - WOL Disabled
W
W
W
Off (S5) - WOL Enabled
0.264 W
0.276 W
0.348 W
Off (S5) - WOL Disabled
W
Category I1
EPS No-load
(External power supply /
charger plugged in the wall
outlet but disconnected from
the product.)
TEC
Typical Energy Consumption
ETEC *
Annual Energy Consumption
W
W
0.26 W
0.38 W
kWh/week
kWh/week
kWh/week
33.35
kWh/year
31.83
kWh/year
33.31
kWh/year
W
Display resolution
: 1600 x 900 Pixels
Print Speed
:
Reference
Use for Energy Star V6 registration(POFF)
Use for ErP
ETEC = (8760/1000) x (POFF × TOFF + PSLEEP ×
TSLEEP + PLONG_IDLE × TLONG_IDLE + PSHORT_IDLE ×
TSHORT_IDLE)
Images per minute
Default time to enter energy save mode: 20 minutes
P9.2*
Information about the energy save function is provided with the product.
P9.3*
The product meets the energy requirements of the following voluntary program/s:
ENERGY STAR version: Version 6.0 dated June 2, 2014 Product category: I1
Others specify:
P10
Emissions
Noise emission – Declared according to ISO 9296
Mode
Mode description
P10.1
Declared
A-weighted
sound power
level LWAd (B)
Declared A-weighted
sound pressure level L pAm (dB)
Bystander positions
Operator position
Desktop
or Desk side
Idle
Operation
Other mode
* HDD: Idle
* HDD: Operating
* 2.7
* 3.3
(only if product is not
operator attended)
20
29
Measured according to:
P10.2
ISO7779
ECMA-74
Other
(only if not covered by ECMA-74 with LpAm measurement distance
m)
The product meets the acoustic noise requirements of the following voluntary program/s:
A n n e x B o f E C MA - 3 7 0 4 t h e d i t i o n , J u n e 2 0 0 9
Page 4 (9)
Model number *
ThinkPad X1 Carbon
M/T: 3443/3444/3446/3448/3460/3462/3463
Issue date *
2014, June 17
Logo
Product environmental attributes - Market requirements (continued)
Requirement met
Item
P10.3*
P10.4
P10.5
P10.6
P11
P11.1*
P11.2*
Yes
P11.3*
Paper containing post-consumer recycled fibers can be used, provided that it meets the requirements of
EN12281.
2-sided (duplex) printing/copying is an integrated product function.
P12
P12.1*
Ergonomics for computing products
The display meets the ergonomic requirements of ISO 9241-307 for visual display technologies.
P12.2*
The physical input device meets the requirements of ISO 9995 and ISO 9241-410.
P13
P13.1*
Packaging and documentation
Product packaging material type(s): Corrugated Cardboard
Product packaging material type(s): Recycled Polyethylene(RLDPE)
Product packaging material type(s): Others (plastic bags)
Product plastic packaging is free from PVC.
P13.2*
P13.3*
P13.4*
P14
P9
No
n.a.
Chemical emissions from printing products
Test performed according to ECMA-328 (ISO/IEC 28360) standard
, other specify:
Typical emission rate (print phase) is (mg/h):
Dust
Ozone
Styrene
Benzene
TVOC
Chemical emission requirements of the following voluntary program/s
are met for :
Dust
Ozone
Styrene
Benzene
TVOC
Electromagnetic emissions
Computer display meets the requirement for low frequency electromagnetic fields of the following voluntary
program/s: MPR-II(3 pin AC adapter only)
Consumable materials for printing products
A Safety Data Sheet (SDS) is available for the ink/toner preparation, even if not legally required (see P4.3).
weight (kg): 0.496
weight (kg): 0.162
weight (kg): 0.020
Specify media for user and product documentation (tick box):
Electronic
, Paper
, Other
For paper user and product documentation, please specify contained percentage of post-consumer recycled
fiber: 0% (Japan only 70%)
Additional information (See Note B4)
NOTE: Supplier makes no representations, guarantees, assurances or warranties whether express or implied, regarding the
information contained in this document. All information provided by supplier in this document is provided based on supplier’s
knowledge available at the time of completion, and supplier shall have no obligation to update such information. The information
provided here is approximate and provided for informational purposes only. See a Lenovo Account Representative for more
information.
See Energy Star Qualified Notebooks & Tablet Computers for the latest information:
http://www.energystar.gov/index.cfm?fuseaction=find_a_product.showProductGroup&pgw_code=CO
Note B4: Additional lines may be inserted to declare further items, by positioning the cursor at the far right of the row and
hitting the <Enter> key.
A n n e x B o f E C MA - 3 7 0 4 t h e d i t i o n , J u n e 2 0 0 9
Page 5 (9)
Legal references Europe Annex B
Ref eren ce
Declarat io n it em
2002/95/EC (ROHS Directive)
P1.1, P4.1
REACH, Annex XVII
P1.6, P1.8, P4.2
REACH, Annex XVII
P1.4
REACH, Annex XVII
P1.2
REACH, Annex XVII
P1.7
REACH, Annex XVII
P1.9
Regulation (EC) No. 2037/2000, 2038/2000, 2039/2000
P1.3
N o r we g i a n r e g u l a t i o n r e l a t i n g t o r e s t r i c t i o n s o n t h e u s e
of certain dangerous chemicals 20.12.2002
P1.5
2006/66/EC (Battery and accumulators Directive)
P2.1, P2.2, P2,3, P3.4, P8.1
2006/95/EC (Low Voltage Directive)
P3.1, 3.4
2 0 0 4 / 1 0 8 / E E C ( N e w E MC D i r e c t i v e )
P3.2, 3.4
1 9 9 9 / 5 / E C ( R & TTE D i r e c t i v e )
P3.3, 3.4
“REACH" Regulation (1907/2006), annex VII
P1.10
(EC) No.1272/2008 regulation on classification, labeling
and packaging (CLP)
P4.3
REACH article 31, annex II
P4.3
2 0 0 4 / 1 2 / E C ( D i r e c t i ve o n p a c k a g i n g a n d p a c k a g i n g
wa s t e )
P5.1
(97/129/EC) (Commission Decision on Identification
S ys t e m f o r P a c k a g i n g Ma t e r i a l s
P5.2
2037/2000/EC Regulation on Substances that Deplete
t h e O z o n e L a ye r
P5.3
2 0 0 2 / 9 6 / E C ( W E E E d i r e c t i ve )
P3.4, P6.1
(EC) No.1272/2008 regulation on classification, labeling
and packaging (CLP)
P7.19
A n n e x B o f E C MA - 3 7 0 4 t h e d i t i o n , J u n e 2 0 0 9
Page 6 (9)
Lenovo ErP Lot3 Information Sheet
- PC / Notebook As required by COMMISSION REGULATION (EU) No 617/2013 of 26 June 2013 implementing Directive
2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for
computers and computer servers (ErP Lot3).
Products scope of this sheet:
Desktop computer, integrated desktop computer, and notebook computer
This document is only valid in connection with the IT Eco Declaration of the specific Product.
Commercial name
ThinkPad X1 Carbon
Model Number
3443, 3444, 3446, 3448, 3460, 3462, 3463
Issue Date
2014, July 1
Logo
Additional information
P7.1.1 Product environmental attributes
(d)
year of manufacture:
(e)
E TEC value (kWh) per ErP Lot 3 Category and capability adjustments applied when all discrete graphics cards (dGfx) are
disabled and if the system is tested with switchable graphics mode with UMA driving the display:
2014
Category (according to ErP Lot 3): A
(f)
Etec: 20.08
E TEC value (kWh) per ErP Lot 3 Category and capability adjustments applied when all discrete graphics cards (dGfx) are
enabled:
Category (according to ErP Lot 3):
Etec:
(g)
idle state power demand (Watts);
(h)
sleep mode power demand (Watts);
(i)
sleep mode with WOL enabled power demand (Watts) (where enabled);
(j)
off mode power demand (Watts);
(k)
off mode with WOL enabled power demand (Watts) (where enabled);
(l)
internal power supply efficiency at 10 %, 20 %, 50 % and 100 % of rated output power (if applicable):
10%
(m)
50%
100%
1.82
0.32
Average
external power supply efficiency (if applicable):
10%
(o)
20%
6.38
20%
50%
100%
Average
;
or level: V
the minimum number of loading cycles that the batteries can withstand (applies only to notebook computers):
500
(p-1)
the measurement methodology used to determine information mentioned in points (l) – internal PSU
efficiency:
Not applicable
(p-2)
the measurement methodology used to determine information mentioned in points (m) – external PSU
efficiency:
EPA “Test Method for Calculating the Energy Efficiency of Single-Voltage External AC-DC and AC-AC
Power Supplies” dated August 11, 2004
(p-3)
the measurement methodology used to determine information mentioned in points (o) – loadingcycles
batteries:
IEC 61960 measurement methodology
A n n e x B o f E C MA - 3 7 0 4 t h e d i t i o n , J u n e 2 0 0 9
Page 7 (9)
(p-4)
the measurement methodology used to determine information mentioned in maximum, idle, sleep, off mode
power as defined in Point P9.1 in the Product IT Eco Declaration:
ENERGY STAR measurement methodology
(q)
sequence of steps for achieving a stable condition with respect to power demand::
ENERGY STAR measurement methodology
(r)
description of how sleep and/or off mode was selected or programmed:
By selecting sleep and/or off mode thru Windows operating system
(s)
sequence of events required to reach the mode where the equipment automatically changes to sleep and/or
off mode:
Automatically changes to sleep after 20 minutes
(t)
the duration of idle state condition before the computer automatically reaches sleep mode, or another
condition which does not exceed the applicable power demand requirements for sleep mode (in minutes):
(u)
the length of time after a period of user inactivity in which the computer automatically reaches a
power mode that has a lower power demand requirement than sleep mode (in minutes):
(v)
the length of time before the display sleep mode is set to activate after user inactivity (in minutes):
20 minutes
10 minutes
(w)
information on the energy-saving potential of power management functionality:
User information described in User Guide and Power Manager under ThinkVantage menu in all
programs
(x)
user information on how to enable the power management functionality:
User information described in User Guide and Power Manager under ThinkVantage menu in all
programs
(z)
test parameters for measurements: — test voltage in V and frequency in Hz, — total harmonic distortion of
the electricity supply system, — information and documentation on the instrumentation, set-up and circuits
used for electrical testing:
230V, 50Hz, Total Harmonic Distortion <2 %
Addition Notebook Battery Information:
Yes
(Battery not
replaceable)
No
user
user (Battery
replaceable)
n/a
This notebook computer is operated by battery/ies that cannot be accessed and replaced
by a non-professional user.
The battery[ies] in this product cannot be easily replaced by users
themselves
A n n e x B o f E C MA - 3 7 0 4 t h e d i t i o n , J u n e 2 0 0 9
Page 8 (9)
Additional information
A n n e x B o f E C MA - 3 7 0 4 t h e d i t i o n , J u n e 2 0 0 9
Page 9 (9)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement