Data Sheet - Valiant Communications Limited

Data Sheet - Valiant Communications Limited
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
VCL-MX Version 3–DLX (Deluxe Version)
4 x E1, Drop-Insert Voice and Data Multiplexer
VCL-MX, Voice and Data Multiplexer
Product Brochure & Data Sheet
U.K.
U.S.A.
INDIA
Valiant Communications (UK) Ltd
1, Acton Hill Mews,
310-328 Uxbridge Road,
London W3 9QN, United Kingdom
Valcomm Technologies Inc.
4000 Ponce de Leon, Suite 470
Coral Gables, FL 33146
U.S.A.
Valiant Communications Limited
71/1, Shivaji Marg,
New Delhi - 110015,
India
Valiant Communications Limited - 2006-14
1
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Index
S. No.
Particulars
Page No.
1.
Introduction
3
2.
Key Features
3
3.
Additional Features
4
4.
Highlights
4
5.
Transmission Mediums
4
6.
Multi-service platform
4
7.
Flexibility
5
8.
Configuration
5
9.
Synchronization
5
10.
Application of VCL-MX
5
11.
System Overview and Architectural Details
6
12.
Front View
7
13.
Back View
7
14.
Voice Interfaces
8
15.
Data Interface
8
16.
Chassis / System Backplane
8
17.
System Management
9
18.
Technical Specifications
10
19.
Application Diagram
22
20.
Ordering Information
29
21.
Support
34
Valiant Communications Limited - 2006-14
2
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Product Overview:
The VCL-MX Version 3–DLX (Deluxe Version) 4E1
Multiplexer is a carrier class and cost-effective
bandwidth provisioning equipment designed to
manage and deliver services from the optical core to
the access.
VCL-MX Version 3–DLX (Deluxe Version) 4E1
Multiplexer may be used for inter-connecting legacy
voice and data networks, provisioning and managing
VCL-MX Version 3 – DLX – Front View
bandwidth on a E1 channelized level as well as 64Kbps, DS-0 time-slot level and as a digital-access
cross-connect equipment. This 4 x E1 Multiplexer can be used in a Point-to-Point, Point-to-Multi point,
Add-Drop (drop-insert), Tree and Star topology applications.
Introduction
VCL-MX Version 3–DLX (Deluxe Version) – 4E1 Multiplexer may be used for inter-connecting legacy
voice and data networks, provisioning and managing bandwidth on a E1 channelized level as well as
64Kbps, DS-0 time-slot level and as a digital-access cross-connect equipment. Due to the changing
traffic patterns, there is a need to support multiple services from the same equipment like integrated
data transport, better network management etc. This necessitated evolution to next-generation E1
Multiplexer. Single control card and redundant power supply options make it an ideal chose for network
service providers seeking to integrate and provide legacy and the next generation services from a
single platform.
The next generation E1 Multiplexer has emerged as one of the most economical and technologically
viable solutions for transmitting both voice and data over carrier networks. This technology offers
savings on investments/power and space to service providers.
Valiant Communications provides efficient solutions in this field using the E1 Multiplexer series
products. E1 Multiplexer provides a full range of solutions in this evolving field of next generation
telecom solutions. E1 Multiplexer family provides the unique advantage of carrying both data and voice
over PDH. In addition to being affordable, these products have built-in modularity, which allow easy
upgradeability. This upgradeability feature allows the customer to evolve in a “build-as-you-grow”
concept. Along with Valiant Communications as a network management solution the E1 Multiplexer
family provides the following features:
•
•
•
•
•
•
Easy network manageability
Lower cost per line
Easy upgradeability
Carrying both data and voice over PDH
Easy integration to SDH network
Higher reliability
Key Features
VCL-MX Version 3–DLX (Deluxe Version) – 4E1 Multiplexer provides the advanced features and
capabilities, listed below:
• 2Mbps, 4 E1 non-blocking cross-connect at 64Kbps (DS-0) level
• Single Control Card
• 1+1 Redundant Power Supply
• May be used in a Point-to-Point, Point-to-Multi point, Add-Drop (drop-insert), Tree and Star
topology
• Telnet
• SNMP V2
• In-band and Out-of-band management
Valiant Communications Limited - 2006-14
3
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
• GUI
Additional Features
•
•
•
•
•
•
•
•
•
•
Voice and Digital Data services
Any combination ("mix-n-match") of voice and digital data services deployed from a single
VCL-MX "Smart Shelf” - 2 channels per card
Digital Data option may be used for internet access or video conferencing application
Wireless applications including cellular networks
Digital Microwave Radio
SCADA applications
ATM/Frame Relay circuit termination
Powerful Network Management System for monitoring and network control
Compliance with all relevant ITU-T (CCITT) recommendations
19-inch, 3U high construction.
Highlights
•
•
•
•
•
•
•
•
•
•
•
Field upgradable to provide voice, data or both services
Flexibility on use of transmission medium-copper, fiber or wireless
Choice of Interfaces for Voice and Data Applications
RS232 and USB, Interface for local connection through the serial interface to the "Network
Control and Management Software”
10/100BaseT Ethernet Management port for local and remote connection to the "Network
Control and Management Software”
In-band and Out-of-band system configuration and management interface
Channel assignment independent of slot position in the sub-rack
Extensive set of alarms
User Selectable Internal, External or Loop-timed Synchronization clock options
OAM Card in the system
Any interface card can plug in at assigned interface slot.
Transmission Mediums
The VCL-MX offers an excellent flexibility on the choice of transmission medium over which it may be
deployed. The transmission medium can be either of the following:
•
•
•
Copper
Optical Fiber
Wireless
Multi-service platform
VCL-MX Version 3–DLX (Deluxe Version) – 4E1 Multiplexer supports both data and voice traffic.
For voice traffic, it supports the following interfaces:
• FXO
• FXS
• E&M (2Wire / 4Wire)
• FXS-FXS (Hot-Line)
• Ring Generator (75V RMS)
• Magneto (GEN-GEN)
Valiant Communications Limited - 2006-14
4
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
For data traffic, it supports the following interfaces:
•
•
•
•
•
•
•
•
•
•
Channelized E1 / Fractional E1 Data
RS232 asynchronous data
V.24 asynchronous data
G.703, @ 64 Kbps, co-directional synchronous data
V.35, V.36, X.21, V.11, RS442, RS530, “n”x64Kbps synchronous data
10BaseT Bridge Interface Card
Analog I/O Interface Card (Dry Relay Contacts)
Digital I/O Interface Card (Digital TTL Signal Transfer Card)
“N”x64Kbps Universal Data Interface Card (user configurable data interface)
Complete Capability to Cross Connect Voice and Digital data between 4 incoming E1 ports
(i.e. 4 separate connecting E1 links)
Flexibility
It can be configured in various topologies supporting electrical interfaces. It can take modular cards,
which would enable the customers to start small and grow as traffic demands scale.
Configuration
VCL-MX Version 3–DLX (Deluxe Version) – 4E1 Multiplexer can be configured as an Add-Drop
Multiplexer (ADM) and Terminal Multiplexer (TMUX). It can support diverse topologies like point-topoint, ring, star and tree.
Synchronization
Timing Options
Internal Clock, Loop-Timed Clock, External Clock
Synchronization Sources
Internal Clock, span clock timing derived from incoming HDB3 links
(Loop-Timed), External Clock, 75 Ohms 2 MHz (TTL), 2.048 Mbps
(BITS) Clock.
Default Option
Internal Clock (Stratum 3)
Application of VCL-MX
POTS (voice), digital data or real-time video conferencing services (V.35, V.36, X.21, 10BaseT Ethernet
Bridge) high-speed digital data interface options allow point-to-point network solutions for providing a
video conferencing channel of up to 1920 Kbps).
•
•
•
•
•
•
•
Junction Mux – for digital interconnection of analog exchanges
Point-to-Point, Point-to-Multi point, Add-Drop (drop-insert), Tree and Star topology applications
Wireless network applications
High-speed data ports for digital communication links providing Leased Lines access to Internet
Service Providers (ISPs) with speeds ranging from 64Kbps up to 1920 Kbps digital data
interface options
Micro-Cellular infrastructure applications for providing cell-switch connectivity
Wide area networking
Internet access over POTS lines – all POTS interfaces operate @ 64Kbps and support V.34
(33.6Kbps) dial-up modems.
Valiant Communications Limited - 2006-14
5
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
System Overview and Architectural Details
The VCL-MX Version 3–DLX (Deluxe Version) – 4E1 Multiplexer provides full range of POTS (voice)
and digital data services to subscribers located at different locations, requiring interconnecting and
establishing a voice and data network over an E1 Link. The VCL-MX is a simple, yet powerful E1
Channel Bank for connecting and integrating analog communication equipment with digital E1 services.
The VCL-MX Version 3–DLX (Deluxe Version) – 4E1 Multiplexer provides cross connect, voice
telephony and digital data services for applications.
E1 Multiplexer platform has been envisaged to address the growing demand for an ultra-compact Adddrop Multiplexer (ADM) and provide Ethernet-over-PDH mapping functions. It can be configured in
various topologies such as linear, star, ring and bus.
VCL-MX Version 3–DLX (Deluxe Version) – 4E1 Multiplexer has a multi-slot chassis with TDM
backplane. In the chassis, there are thirteen (13) traffic slots meant for tributary cards (line cards). The
line cards can support various types of interface cards, which include E1, Voice and various types of
serial synchronous data interface.
The VCL-MX Version 3–DLX (Deluxe Version) has 10 slots for the following interfaces:
•
•
•
•
FXO
FXS
E & M (2-wire and 4-wire)
Hotline
•
•
•
•
RS232 / V.24 asynchronous
RS485
G.703 @ 64 Kbps, co-directional
Magneto (GEN-GEN)
The VCL-MX Version 3–DLX (Deluxe Version) has 3 slots for the following interfaces: @ “N”x64 Kbps
•
•
•
•
•
•
V.35
V.36
X.21
RS530
10BaseT Bridge Interface Card
V.11
•
•
•
•
RS442
Fractional E1 (FE1)
Analog I/O Interface Card (Dry Relay
Contacts)
Digital I/O Interface Card (Digital TTL
Signal Transfer Card)
The VCL-MX Version 3–DLX (Deluxe Version) has one slot for Ring Generator (75V RMS) Card, one
slot for Control Card, one slot for OAM Card, one slot for the Power Supply and one slot for the
Redundant Power Supply Card.
Analog I/O Interface Card
(Dry Relay Contacts)
Digital I/O Interface Card
(Digital TTL Signal Transfer Card)
Description: This interface card provides 8
Analog I/Os which may be used to extend either
Dry Relay Contacts (Relay Normally-Open or
Relay Normally-Close) or operate switches
remotely (using 2A Dry Relay Contacts) between
any two multiplexers using a 64 Kbps time-slot.
The Dry Relay Contacts are rated at maximum
2 Amps, 30 Volts DC.
Description: This interface card provides 8 digital
I/Os which may be used to either extend digital
I/O’s (logic high / low) signals between any two
E1 Multiplexers or operate switches remotely
(using logic high/low) signals between any two
multiplexers. Drivers / Sense Logic operate
using external voltage and ground references).
Valiant Communications Limited - 2006-14
6
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
VCL-MX Version 3-DLX (Deluxe Version) - Front View
VCL-MX Version 3-DLX (Deluxe Version) - Back View
Valiant Communications Limited - 2006-14
7
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
The Multiplexer may be used in Terminal or Drop-Insert configuration to provide:
•
•
•
•
Toll Quality Voice Services
Interconnect LAN (Campus Network)
Interconnect computer terminals various types of data terminals
Provide LAN-WAN Interconnectivity
Voice Interfaces
For voice traffic, it supports the following interfaces:
•
•
•
•
•
•
FXO
FXS
E&M (2-wire and 4-wire)
Hot-Line (FXS-FXS)
Ring Generator (75V RMS)
Magneto (GEN-GEN)
Data Interfaces
•
•
•
•
•
•
•
•
•
•
•
Channelized E1 / Fractional E1 data with full cross-connect capability at 64Kbps, DS-0 level
RS232 asynchronous data
V.24 asynchronous data
RS485 asynchronous data
G.703, @ 64 Kbps, co-directional synchronous data
V.35, V.36, X.21, V.11, RS442, RS530, “n”x64Kbps synchronous data
10BaseT Bridge Interface Card
Fractional E1 (FE1)
Analog I/O Card (Dry Relay Contacts)
Digital I/O Card (Digital TTL Signal Transfer Card)
Universal DCE / DTE synchronous “n”x64Kbps data interface
Chassis / System Backplane
All connections are made at the rear of the chassis, providing interconnections between the various
plug-in cards and to the network. VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Multiplexer supports
high-density PDH cards. The line cards can terminate a combination of Voice, Data and E1 Interfaces.
The VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Multiplexer has a 2MBits/sec back-plane and
provides a host of features including, channel drop and insert facility over a network of VCL-MX Version
3–DLX (Deluxe Version) - 4 E1 Multiplexers for voice and data applications.
An extensive set of alarms for easy maintenance, are provided in the system.
Valiant Communications Limited - 2006-14
8
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
System Management
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Multiplexer offer a variety of management options, The
VCL-MX E1 multiplexer management software can be configured using CLI (English text) commands
and GUI (Graphical User Interface). The management and configuration commands may be executed
from a VT100 terminal, Windows HyperTerminal, any DOS based system, Linux or Unix based system
or Telnet (remote management).
The VCL-MX has an effective CLI (text) and GUI based "Network Management Interface", which may
be used for configuring the system.
Management Port and Control Interfaces
Serial Management Port - RS232 Interface
USB Serial Port
10/100BaseT Telnet over a TCP/IP Network
•
•
•
System Access and Management
•
Windows XP and Windows 7 compatible GUI (Graphical User Interface)
•
Telnet - CLI (Command Line Interface)
•
SNMP V2 (MIB File provided with the equipment)
•
Inband Management of Remote Units over the E1 links
•
NMS - Network Management System
Power Supply
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Multiplexer is powered by a -48V DC power supply,
which drives the various sub-systems in it.
The following features are supported:
•
•
•
Allows for power monitoring by LED
Reverse polarity and inrush current limiting
1+1 Redundancy
Valiant Communications Limited - 2006-14
9
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Technical Specifications:
E1 Interface
Maximum Number of E1 Interfaces
4 E1 Interfaces with full capability to cross connect at DS0, 64Kbps time-slot level, as well as to inter-connect to
voice and digital data services between 4 incoming E1
Ports (i.e. 4 separate E1 Links)
Conformity (electrical)
G.703
Frame Structure
As per ITU (CCITT) G.704
Signaling
Channel Associated Signaling (ABCD programmable)
PCM Sampling Rate
8000 Samples / sec
Encoding Law
A Law as per ITU (CCITT)
Bit Rate
2048 Kbps ± 50 ppm
Code
HDB3
Nominal Impedance
Peak Voltage of a mark
For 120Ω Balanced interface
75Ω Unbalanced interface
Peak Voltage of a space
For 120Ω Balanced interface
75Ω Unbalanced interface
Nominal Pulse Width
120Ω balanced / 75Ω unbalanced
244 ns
Pulse Mask
As per ITU (CCITT) Rec. G.703
Output Jitter
<0.05 UI (in the frequency range of 20Hz to 100 KHz)
Permissible Attenuation
Return Loss at:
51.2 KHz to 102.4 KHz
102.4 KHz to 2048KHz
2048KHz to 3072 KHz
Jitter Tolerance
6 dB at 1 MHz
Loss and recovery of frame alignment
As per clause 3 of ITU (CCITT) G.732
Loss and recovery of multi-frame
alignment
As per clause 5.2 of ITU (CCITT) G.732
3.0 V ± 0.3 V
2.37 V ± 0.237 V
0 V ± 0.3 V
0V ± 0.237 V
>12dB
> 18dB
> 14dB
As per ITU (CCITT) G.823
2 Wire - Voice Frequency Interface(s) - FXS (VCL-CB-025)
Number of Channels per Card
Interface Type
Maximum Number of Channels
2
FXS
20
Transmission performance
Fully Compliant to ITU (CCITT) G.712 (G.713, G.714)
specification
Line Impedance
600 Ω (900 Ω optional)
Valiant Communications Limited - 2006-14
10
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Voice Channel Frequency
300Hz-3400Hz
Insertion Loss
-2.0dB Nominal (User adjustable)
Idle Channel Noise
Longitudinal Balance
≤ - 65dB
300Hz – 600Hz - ≥ 12dB
600Hz – 3400Hz - ≥ 15dB
≥ 46dB between 300Hz to 3400Hz
Ring Frequency
25Hz, (20 Hz, Optional)
Ring Voltage
≥ 75 volts RMS into a load of 5 R.E.N. with a
0.30 Erlang traffic pattern
Subscriber Loop Current
≥ 23mA into a subscriber loop of 1000 Ohms
Overload Level
+3.14dBm ± 0.5dBm
Battery Reversal
All channels
Dial Pulse Speed
8 -12 pps - Pulse Dialing/DTMF Dialing
Return Loss
2 Wire - Voice Frequency Interface(s) - FXS (VCL-CB-025-EXT)
Number of Channels per Card
Interface Type
2
FXS - EXT
Maximum Number of Channels
20
Transmission performance
Fully Compliant to ITU (CCITT) G.712 ( G.713, G.714)
specification
Line Impedance
600 Ohms (900 Ohms optional)
Voice Channel Frequency
300Hz-3400Hz
Insertion Loss (nominal)
-2dB (user adjustable range of -2dB to -8dB)
User selectable range for insertion loss
1dB to 7dB
Input level minimum
-11dB
Input level maximum
3.2dB
Transmit Gain
0 to 16dB (user configurable)
Receive Attenuation
0 to 16dB (user configurable)
Idle Channel Noise
< -65dB
300Hz - 600Hz - > 12dB
Return Loss
600Hz - 3400Hz - > 15dB
Longitudinal Balance
> 46dB between 300Hz to 3400Hz
Ring Frequency
25 Hz (20Hz, Optional)
Ring Voltage
> 75 volts RMS into a load of 5 R.E.N.
with a 0.30 Erlang traffic pattern
Subscriber Loop Current
23mA into a subscriber loop of 1000 ohms
Overload Level
+3.14dBm ± 0.5dBm
Battery Reversal
All channels
Dial Pulse Speed
8 -12 pps - Pulse Dialing/DTMF Dialing
Valiant Communications Limited - 2006-14
11
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
2 Wire - Voice Frequency Interface(s) - FXO (VCL-CB-030)
Number of Channels per Card
2
Interface Type
FXO
Maximum Number of Channels
Line Impedance
20
Fully Compliant to ITU (CCITT) G.712 (G.713, G.714)
specification
600 Ω (900 Ω optional)
Voice Channel Frequency
300Hz-3400Hz
Insertion Loss / Gain
-2.0dB Nominal (User adjustable)
Idle Channel Noise
Longitudinal Balance
≤ -65dB
300Hz - 600Hz - ≥ 12dB
600Hz - 3400Hz - ≥ 15dB
≥ 46dB between 300Hz to 3400Hz
Ring Frequency
25 Hz (20Hz, Optional)
Ring Voltage
≥ 75 volts RMS into a load of 5 R.E.N.
with a 0.30 Erlang traffic pattern
Subscriber Loop Current
≥ 23mA into a subscriber loop of 1000 ohms
Overload Level
Battery Reversal
+3.14dBm ± 0.5dBm
All channels
Dial Pulse Speed
8 -12 pps - Pulse Dialing/DTMF Dialing
Transmission performance
Return Loss
Valiant Communications Limited - 2006-14
12
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Hot-Line Interface Card (VCL-CB-027)
Number of Channels per Card
2
Interface Type
Hot-Line
Maximum Number of Channels
20
Transmission performance
Fully compliant to ITU (CCITT) G.712 (G.713, G.714)
specification
Line Impedance
600 Ω
Voice Channel Frequency
300Hz-3400Hz
Insertion Loss
-2.0dB Nominal
Idle Channel Noise
Longitudinal Balance
≤ -65dB
300Hz - 600Hz - ≥ 12dB
600Hz - 3400Hz - ≥ 15dB
≥ 46dB between 300Hz to 3400Hz
Ring Frequency
25 Hz (20Hz, optional)
Ring Voltage
≥ 75 volts RMS into a load of 5 R.E.N. with a
0.30 Erlang traffic pattern
Subscriber Loop Current
≥ 23mA into a subscriber loop of 1000 Ohms
Overload Level
+3.14dBm ± 0.5dBm
Battery Reversal
All channels
Dial Pulse Speed
10 pps - Pulse Dialing / DTMF Dialing
Return Loss
2 Wire / 4 Wire Voice Frequency Interface(s) E&M (VCL-MX-035-EXT)
Number of Channels per Card
2
Interface Type
E&M - Ext
Maximum Number of Channels
20
Transmission performance
Fully compliant to ITU (CCITT) G.712 (G.713, G.714)
specification
Line Impedance
600 Ω (900 Ω optional)
Voice Channel Frequency
300Hz-3400Hz
Insertion Loss / Gain
-2.0 dB nominal (User adjustable)
Idle Channel Noise
≤ -65dB
Return Loss – 2 wire
300Hz - 600Hz - ≥ 12dB
600Hz - 3400Hz - ≥ 15dB
Return Loss – 4 wire
300Hz - 3400Hz - ≥ 20dB
Longitudinal Balance
≥ 46dB between 300Hz to 3400Hz
Overload Level
+3.14dBm ± 0.5dBm
Dial Pulse Speed
Pulse / MFC Dialing / DTMF Dialing
Valiant Communications Limited - 2006-14
13
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
E&M 2 Wire / 4 Wire Voice Frequency Interface (VCL-MX-035)
Number of Channels per Card
2
Interface Type
2W / 4W E&M
Maximum Number of Channels
20
Transmission performance
Fully compliant to ITU (CCITT) G.712 specification
Line Impedance
600 Ω
Voice Channel Frequency
300Hz-3400Hz
Insertion Loss / Gain
-2.0 dB Nominal
Idle Channel Noise
Longitudinal Balance
Overload Level
≤ -65dB
300Hz - 600Hz - ≥ 12dB
600Hz - 3400Hz - ≥ 15dB
≥ 46dB between 300Hz to 3400Hz
+3.14dBm ± 0.5dBm
E & M Signaling Rate
10pps
Return Loss
GEN GEN / Magneto Interface Card
(VCL-MX-1478-GEN)
Number of Channels per Card
Interface Type
Line Impedance
Voice Channel Frequency
Ringing generator frequency
Ring Voltage
Maximum Number of Channels
Transmission performance
Insertion Loss / Gain
Idle Channel Noise
Return Loss
Longitudinal Balance
Overload Level
Valiant Communications Limited - 2006-14
2
Magneto, 2-wire (GEN-GEN)
600 Ω
300Hz-3400Hz
25Hz
75 volts RMS
20
Fully compliant to ITU (CCITT) G.712 specification
-2.0dB Nominal
≤ -65dB
300Hz - 600Hz - ≥ 12dB
600Hz - 3400Hz - ≥ 15dB
≥ 46dB between 300Hz to 3400Hz
+3.14dBm ± 0.5dBm
14
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Low Speed Data Interface RS232 / V.24 (VCL-CB-045)
Interfaces
Number of Interfaces per Card
Maximum Number
Conformity
Mode
Bit Rate
User Interface
Character Length
Stop Bits
Parity
RS232
2
20
RS232
Asynchronous
50 Kbps to 19.2 Kbps
DCE
5 / 6 / 7 / 8 (auto-select)
1 / 1.5 / 2 (auto-select)
Even / Odd / 0’s / 1’s / none (Auto-Select)
G.703 @ 64kbps, Synchronous Data Interface (VCL-CB-060)
Interface
G.703 @ 64 Kbps
Number of Interfaces per Card
2
Maximum Number
20
Conformity
To (CCITT) Rec. G.703
Mode
Synchronous, Co-directional
Bit Rate
64Kbps
Universal Data Interface: High Speed Synchronous “n x 64” Data Interface Type - User
Configurable DCE-DTE (VCL-MX-59)
Interface
Number of Interfaces per Card
V.35, V.36, X.21, RS530, RS442, V.11
1, (“N” x 64KBits / sec. per card)
Maximum Number of Interfaces per system
3
Bandwidth
Conformity
Mode
Bit Rate
User Interface
(“N” x 64 Kbits / sec. interface
maximum value of “N” =30)-user selectable
Universal user-configurable as above
Synchronous
64 Kbps to 1920 Kbps
DCE/DTE (user programmable for DTE / DCE mode)
High Speed Synchronous “n x 64” Data Interface Type: 10BaseT Ethernet Bridge
(VCL-MX-10BaseT)
Interface
10BaseT (bridge)
Number of Interfaces per Card
1
Maximum Number of Interfaces per system
3
Bandwidth
(“N” x 64Kbits/sec. interface
maximum value of “N” =30) - user selectable
Valiant Communications Limited - 2006-14
15
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Conformity
10BaseT Ethernet Bridge
Mode
Synchronous
Bit Rate
64 Kbps to 16Mbps
User Interface
10BaseT
High Speed Synchronous “n x 64” Data Interface Type: V.35 (VCL-MX-59)
Interface
V.35
Number of Interfaces per Card
1, (“N” x 64Kbits/sec. per card)
Maximum Number of Interfaces per system
3
Bandwidth
(“N” x 64Kbits / sec. interface
maximum value of “N” = 30) - user selectable
Conformity
V.35
Mode
Synchronous
Bit Rate
64 Kbps to 1920 Kbps
User Interface
DCE
High Speed Synchronous “n x 64” Data Interface Type: V.36 (VCL-MX-59)
Interface
V.36
Number of Interfaces per Card
1, (“N” x 64KBits/sec. per card)
Maximum Number of Interfaces per system
3
Bandwidth
(“N” x 64Kbits / sec. interface
maximum value of “N” = 30) - user selectable
Conformity
V.36
Mode
Synchronous
Bit Rate
64 Kbps to 1920 Kbps
User Interface
DCE
Valiant Communications Limited - 2006-14
16
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
High Speed Synchronous “n x 64” Data Interface Type: X.21 (VCL-MX-59)
Interface
X.21
Number of Interfaces per Card
1, (“N” x 64Kbits/sec. per card)
Maximum Number of Interfaces per system
3
Bandwidth
(“N” x 64Kbits / sec. interface
maximum value of “N” = 30) - user selectable
Conformity
X.21
Mode
Synchronous
Bit Rate
64 Kbps to 1920 Kbps
User Interface
DCE
High Speed Synchronous “n x 64” Data Interface Type: V.11 (VCL-MX-59)
Interface
V.11
Number of Interfaces per Card
1, (“N” x 64Kbits/sec. per card)
Maximum Number of Interfaces per system
3
Bandwidth
(“N” x 64Kbits / sec. interface
maximum value of “N” = 30) - user selectable
Conformity
V.11
Mode
Synchronous
Bit Rate
64 Kbps to 1920 Kbps
User Interface
DCE
High Speed Synchronous “n x 64” Data Interface Type: RS442
Interface
RS442
Number of Interfaces per Card
1, (“N” x 64Kbits/sec. per card)
Maximum Number of Interfaces per system
3
Bandwidth
(“N” x 64Kbits / sec. interface
maximum value of “N” = 30) - user selectable
Conformity
RS442
Mode
Synchronous
Bit Rate
64 Kbps to 1920 Kbps
User Interface
DCE
Valiant Communications Limited - 2006-14
17
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
High Speed Synchronous “n x 64” Data Interface Type: RS530 (VCL-MX-59)
Interface
RS530
Number of Interfaces per Card
1, (“N” x 64Kbits/sec. per card)
Maximum Number of Interfaces per system
3
Bandwidth
(“N” x 64Kbits / sec. interface
maximum value of “N” = 30) - user selectable
Conformity
RS530
Mode
Synchronous
Bit Rate
64 Kbps to 1920 Kbps
User Interface
DCE
Digital I/O Interface Card (Digital TTL Signal Transfer Card) (VCL-MX-048)
Description: This interface card provides 8 digital I/Os which may be used to either extend digital I/O’s
(logic high / low) signals between any two E1 Multiplexers or operate switches remotely (using logic
high/low) signals between any two multiplexers. Drivers / Sense Logic operate using external voltage
and ground references).
Digital I/O’s - Type I
Number of Digital I/Os per 64 Kbps
time-slots / per Interface Card
8 Digital In / 8 Digital Out / (Logic High / Low) Interfaces
Digital Drivers (current source type)
8
Max Source current
External Ref Voltage Range
External Reference Voltage
Minimum Load Resistance @ 5V
100mA
5 Volts to 30 Volts DC
Required
50R
Minimum Load Resistance @ 30V
300R
Digital Sensor (current sink type)
8
Maximum sink current
Voltage Range
30mA
5 Volts
External Ground Reference
Required
OR
Valiant Communications Limited - 2006-14
18
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Digital I/Os - Type II
Digital Drivers (current sink type)
Maximum sink current
Voltage Range
External Ground Reference
Digital Sensor (current source type)
Maximum sink current
Voltage Range
External Ground Reference
8
100mA
5 Volts to 30 Volts DC
Required
8
30mA
5 Volts to 30 Volts DC
Required
Analog I/O Interface Card (Dry Relay Contacts) (VCL-MX-047)
Description: This interface card provides 8 Analog I/Os which may be used to extend either Dry Relay
Contacts (Relay Normally-Open or Relay Normally-Close) or operate switches remotely (using 2A Dry
Relay Contacts) between any two multiplexers using a 64 Kbps time-slot. The Dry Relay Contacts are
rated at maximum 2 Amps, 30 Volts DC.
Relay Specifications (Drivers – per interface card)
Maximum Number of Relay Ports
8
Maximum Switching Power
60 W
Maximum Switching Voltage
30V DC
Maximum Switching Current
Typical Number of Operation
2 Amps
> million
Dry Contacts Sensors per interface card
Maximum Number of Dry Contact
Sensors
Maximum Current
30mA
Typical Current
30mA
Reference Source Voltage
3.3 Volts
Valiant Communications Limited - 2006-14
8
19
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
OAM (Operation and Maintenance) SNMP, Telnet Port Specifications
Network Interface
RJ-45 Ethernet 10BaseT or 100BaseT-TX (auto sensing)
Support auto MDI/MDI X
Compatibility
Ethernet Version 2.0 IEEE802.3
Protocols Supported
UDP/IP, TCP/IP, Telnet, ICMP and SNMP
LEDs
10Base-T and 100Base-TX Activity, full/half duplex
Management
SNMP
Telnet Login
- Radiated and conducted emissions – complies with Class
B limits of EN55022:1998
- Direct and Indirect ESD – complies with EN55024:1998
- RF Electromagnetic Field Immunity – complies with
EN55024:1998
EMI Compliance
- Electrical Fast Transient/Burst Immunity – complies with
EN55024:1998
- Power Frequency Magnetic Field Immunity – complies
with EN55024:1998
- RF Common Mode Conducted Susceptibility – complies
with EN55024:1998
Management Port and Control Interfaces
•
•
•
Serial Management Port - RS232 Interface
USB Serial Port
10/100BaseT Telnet over a TCP/IP Network
System Access and Management
•
Windows XP and Windows 7 compatible GUI (Graphical User Interface)
•
Telnet - CLI (Command Line Interface)
•
SNMP V2 (MIB File provided with the equipment)
•
Inband Management of Remote Units over the E1 links
•
NMS - Network Management System
Protection
Central Office Terminal and Remote Terminal are protected against power surges and transients
occurring from lightning and electric induction as per CCITT Rec. Table I/K-20 towards line side.
Valiant Communications Limited - 2006-14
20
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Power Supply
Input DC Voltage
-48V DC (nominal)
Range of Input
-36V to -72V DC
Output Voltage
+5V, -5V, filtered -48V (for terminal cards)
Full Load Output Current
16A at +5V
Input Voltage Reversal Protection
Provided in the Card
Over Current Protection
16.8A for +5V
Short Circuit Protection
Current limit - 16.8A. Recovers on removal of short
Efficiency at Full Load
>91%
Ripple at Full Load
<5mVrms
Spike at Full Load
<50mV
Maximum Power Consumption
25 watt – with all 20 Voice & Data Circuits active
Power Supply
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Multiplexer is powered by a -48V DC power supply,
which drives the various sub-systems in it.
The following features are supported:
•
•
•
Allows for power monitoring by LED
Reverse polarity and inrush current limiting
1+1 Redundancy
Telco Networks Providing Voice and Data Services
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Multiplexer is an ideal platform to provide high-end
data and voice requirement of clients. VCL-MX Version 3 – DLX – 4 E1 Multiplexer can be installed at
the regional and gateway Points of Presence (POP) locations in order to cater to the ever-growing data
requirements of the customers while supporting legacy services at the same time.
The advantage that the VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Multiplexer provides the
Telecom Service provider is as follows:
•
The VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Multiplexer enables network
simplifications by collapsing networks, nodes and services into a single multi service device.
A smaller number of higher-density nodes and node types enable cost savings as a result of a
smaller, more homogenous network to manage.
•
The flexible architecture of the VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Multiplexer
series ensures that the network is future proof, and the service provider has the flexibility of
choosing a technology he thinks useful at any time in the future with minimal investment.
Valiant Communications Limited - 2006-14
21
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Applications
The VCL VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Multiplexer can be configured in linear and
bus architectures. It can be used in the core of the network to provide high-speed backbone network.
The VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Multiplexer could provide the core for cellular or
mobile networks between Mobile Switching Centers with subtended.
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Multiplexer could also be used to provide versatile
cross-connect functionality to connect telephone exchanges in VCL-MX Version 3–DLX (Deluxe
Version) – 4 E1 Multiplexer in dense metro areas.
Application Diagram
Application 1: Providing Voice and Data Services on Microwave Radio Links
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Voice & Data Multiplexers
Connecting over Digital Microwave Radio Links
Valiant Communications Limited - 2006-14
22
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Application 2: Providing Voice and Data Services on Optical Fiber
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Voice & Data Multiplexers
Connecting over Optical Fiber Links
Application 3: Transporting E & M Channels
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Voice & Data Multiplexers
Connecting at the Central Office/Switch - E & M Interfaces
Valiant Communications Limited - 2006-14
23
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Application 4
VCL-MX Version 3 – DLX – 4 E1 Voice & Data Multiplexers
Using in a Subscriber Loop Point to Point or Drop/Insert Application
FXO/JNC 2 wire exchange loop interface card
FXS/SLC 2 wire subscriber loop interface card
Valiant Communications Limited - 2006-14
24
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Application 5: Providing Synchronous “n x 64” Kbps Data Interfaces
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Voice & Data Multiplexer
Providing Synchronous (X.21, V.35, V.36, RS530)
“n x 64” Kbps Data Interfaces
DCE- Remote DCE Configuration
Data Interface Card (Application A)
DCE- Remote DTE Configuration
Data Interface Card (Application B)
Valiant Communications Limited - 2006-14
25
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Application 6: Providing Voice and Synchronous “n x 64” Kbps Data Interfaces
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Voice & Data Multiplexer
Providing Voice and Synchronous (V.11, X.21, V.35, V.36, RS442, RS530)
“n x 64” Kbps Data Interfaces
Valiant Communications Limited - 2006-14
26
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Application 7: For providing Hybrid Voice and Data Services
Valiant Communications Limited - 2006-14
27
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Application 8:
VCL-MX Version 3–DLX (Deluxe Version) – 4 E1 Voice & Data Multiplexer
used in Add-Drop, Tree and Star Configuration
Valiant Communications Limited - 2006-14
28
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Ordering Information
VCL-MX E1 Core System (Common Equipment)
S. No.
1.
2.
3.
4.
Part #
Product Description
Qty
VCL-MX-015-3-DLX
4 x E1 Control Card
(4 x E1 non-blocking cross-connect at 64Kbps (DS-0)
level). Supports point-to-point, point-to-multi-point, adddrop, tree and star applications
1
VCL-MX-003-1487DLX
19" Shelf 3U High (Sub-rack) fitted with Connectorized
Backplane to accommodate Voice, 64Kbps Data Channels
PLUS "n" x 64Kbps Data Channels [E1 75Ω / 120Ω DB25
(Female)]
[13 Slots (10 + 3) for User Configurable Interface Cards]
1
VCL-MX-010-1497MON
(-) 48VDC Input Power Supply Card,
[Output : +5VDC, -5VDC, filtered -48VDC (for terminal
cards)]
Note: Please order 2 numbers for 1 + 1 redundancy
1
VCL-OAM-1490-5.0
Management Card [RJ45, DB9F COM, USB]
OAM - Operations and Management Card for connecting
the multiplexer to be managed in a LAN - allows the USER
to assign a unique IP address to each multiplexer
connected in a LAN to be managed from a single point.
Telnet, SNMP (V2)
1
VCL-MX, User Configurable Interfaces
S. No.
Part #
Product Description
Qty
1.
VCL-CB-025
2 Port VF, RT (FXS) @ @ 64Kbps Central Office Remote
Terminal Line Interface Card
10 (max) per System / Chassis
1
2.
VCL-CB-027
2 Port VF, Hot-Line (FXS - Ring-Down) @ 64Kbps Line
Interface Card
10 (max) per System / Chassis
1
3.
VCL-CB-030
2 Port VF, CO (FXO) @ 64Kbps Central Office Line
Interface Card
10 (max) per System / Chassis
1
2 Port VF, E&M, 2 Wire / 4 Wire Trunk Line Interface Card
(Programmable Tx and Rx settings / VF range 0 to -15dB
(gain),
10 (max) per System / Chassis
1
Ring Generator Card, Central Office Ring Generator
1 per System/ Chassis with FXS Interfaces
1
4.
VCL-CB-035-EXT
5.
VCL-MX-040-1498MON
Valiant Communications Limited - 2006-14
29
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
VCL-CB-045
2 Port, RS232, 50 Kbps to 19.2 Kbps DCE Asynchronous
Data Interface Card,
10 (max) per System / Chassis
1
VCL-MX-047
8 Port, Analog I/O Interface Card.
Either extend Dry Relay Contacts (Relay Normally - Open
or Relay Normally - Close) or operate switches remotely
(using 2A Dry Relay Contact rated at maximum 2 Amps,
30V DC) between any two multiplexers using a 64 Kbps
time-slot.
3 (max) per System / Chassis
1
VCL-CB-048
8 Port, Digital I/O Card.
Either extend Digital I/O's (logic high / low) signals
between any two E1 Multiplexers or operate switches
remotely (using logic high / low) signals between any two
multiplexers.
3 (max) per System / Chassis
1
9.
VCL-MX-059
1 Port, Universal Synchronous Data Interface Card
V.35, V.36, RS530, X.21, V.11, DTE/DCE, "N" x 64Kbps
Synchronous Data Interface, User Selectable Data Rate of
"N" (1 thru 30) - DCE or DTE (User Configurable),
3 (max) per System / Chassis
1
10.
VCL-CB-060
2 Port, G.703 @ 64kbps, Synchronous Co-directional Data
Interface
10 (max) per System / Chassis
1
11.
VCL-MX-081
1 Port, Fractional E1 - N x 64Kbps Data Interface Card
User Selectable Data Rate of "N" (1 thru 31),
3 (max) per System / Chassis
1
12.
VCL-MX-1478-GEN
13.
VCL-MX-10BaseT
Bridge
6.
7.
8.
2 Port, GEN GEN / Magneto 2-wire Interface Card
10 (max) per System / Chassis
1 Port, Integrated 10BaseT Ethernet Bridge 64Kbps to
16Mbps High Speed Synchronous Data Interface Card
User Selectable ("n" x 64) Bandwidth. "n" = 1 thru 30,
3 (max) per System / Chassis
Valiant Communications Limited - 2006-14
1
1
30
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Ordering Information
Cables and Accessories
S. No.
Part #
1.
VCL-HRNS 1022
FXS/FXO 2 Port Connectorized Cable [2RJ11M-Open]
[1 cable each FXO/FXS card]
1
2.
VCL-HRNS 1068
E&M 1 Port Connectorized Cable [RJ11M6P6C-Open]
[2 cables each E&M card]
1
3a.
VCL-HRNS 1018
RS232 1 Port Connectorized Cable [RJ11M6P6C-DB9F]
[2 cables each RS232 card] OR
1
3b.
VCL-HRNS 1074
RS232 1 Port Connectorized Cable [RJ11M6P6C-DB9M]
[2 cables each RS232 card]
1
4.
VCL-HRNS 1225AIO
AIO 8 Port Connectorized Cable [DB25M-Open]
[1 cable each AIO card]
1
5.
VCL-HRNS 1225DIO
DIO 8 Port Connectorized Cable [DB25M-Open]
[1 cable each DIO card]
1
6a.
VCL-HRNS 1073V35F
V.35 1 Port Connectorized Cable [DB25M-Winchester F]
[1 cable each V.35 card] OR
1
6b.
VCL-HRNS 075V35M
V.35 1 Port Connectorized Cable [DB25M-Winchester M]
[1 cable each V.35 card]
1
7a.
VCL-HRNS 1225V11F
V.36/RS530/V.11 1 Port Connectorized Cable [DB25MDB37F]
[1 cable each V.36/RS530 Card] OR
1
7b.
VCL-HRNS
1225V11M
V.36/RS530/V.11 1 Port Connectorized Cable [DB25MDB37M]
[1 cable each V.36/RS530 card]
1
8a.
VCL-HRNS 1225X21F
X.21 1 Port Connectorized Cable [DB25M-DB25F]
[1 cable each X.21 Card] OR
1
8b.
VCL-HRNS
1225X21M
X.21 1 Port Connectorized Cable [DB25M-DB25M]
[1 cable each X.21 Card]
1
9.
VCL-HRNS 1020
G.703 1 Port Cross Connectorized Cable [RJ11M-RJ45M]
[2 cables each G.703 card]
1
VCL-HRNS 1076
G.703 1 Port Parallel Connectorized Cable [RJ11MRJ45M]
[2 cables each G.703 card]
1
10.
Product Description
Valiant Communications Limited - 2006-14
Qty
31
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
11.
VCL-HRNS
1225FE1P
Fractional E1 Parallel Connectorized Cable [DB25MRJ45M]
(1 cable each card)
1
12.
VCL-HRNS
1225FE1C
Fractional E1 Cross Connectorized Cable [DB25MRJ45M]
(1 cable each card)
1
13.
VCL-HRNS
1225LBRJ45M
LAN Bridge Connectorized Cable [DB25M-RJ45M]
[1 cable each Integrated 10BaseT Bridge card]
1
14.
VCL-HRNS
GEN GEN / Magneto 2 Port Connectorized Cable
[1 cable each GEN GEN / Magneto card]
1
15a.
VCL-HRNS 12254E1O
E1 4 Port Connectorized Cable [DB25M-Open]
[1 cable each Chassis] OR
1
15b.
VCL-HRNS 12254E1RJ45M
E1 4 Port Connectorized Cable [DB25M-4xRJ45M]
[1 cable each Chassis]
1
16.
UMIKitMXV3DLX
System Core Cables, Installation Accessories,
Documentation, System User Manual, System User
Manual Disk etc
1
Ordering Information
Power Supply (External) AC to DC Converter
S. No.
Part #
Product Description
Qty
Power Supply (External) AC to DC Converter,
Portable Adapter Version, PW-065A-1Y48F1,
Universal AC Input [100-240VAC~2A, 50-60Hz] to
DC Output [(-) 48VDC~1.35A 65W] [1 output]
1
1.
VCL-EPSA 0002
2.
VCL-ACDC-48-50W1.1A
Power Supply (External) AC to DC Converter
Portable Desktop Version,
Universal AC Input [93VAC-276VAC, 47Hz-63Hz] to
DC Output [(-) 48VDC~1.10A 50W] [1 Fused output]
1
3.
VCL-ACDC-48-150W3.2A
Power Supply (External) AC to DC Converter
Portable Desktop Version,
Universal AC Input [93VAC-276VAC, 47Hz-63Hz] to
DC Output [(-) 48VDC~3.2A 150W] [1 Fused output]
1
4.
VCL-ACDC-48-150W3.2A-RK
Power Supply (External) AC to DC Converter
19”2U Rack Mount Version,
Universal AC Input [93VAC-276VAC, 47Hz-63Hz] to
DC Output [(-) 48VDC~3.20A 150W] [4 Fused outputs]
1
Valiant Communications Limited - 2006-14
32
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Ordering Information
E1, 120 Ohms (RJ45F) to 75 Ohms (BNCF) Converter
S. No.
Part #
Product Description
Qty
1.
VCL-EMOD 0192
G.703 Balun
G.703 Balun
1xE1 [120Ω RJ45F] to 1xE1 [75Ω 2xBNCF] Converter,
1xE1 Module (Tx / Rx)
[RJ45 / BNC cables not included]
2.
VCL-EMOD 0133
G.703 Balun
G.703 Balun
1xE1 [120Ω RJ45F] to 1xE1 [75Ω 2xBNCF] Converter,
1xE1 Module (Tx / Rx)
[RJ45 / BNC cables not included]
1
3.
VCL-1477-CON-120RJ45F-75-BNCF-16
16xE1, 120Ω [16xRJ45F] to 75Ω [32xBNCF] Converter
Panel
19" Metal case 2U High Rack Mount Version
[RJ45 / BNC cables not included]
1
4.
VCL-HRNS 1011
E1 Cross Connectorized Cable [RJ45M-RJ45M, 3m]
1
5.
VCL-HRNS 1010
E1 Parallel Connectorized Cable [RJ45M-RJ45M, 3m]
1
6.
VCL-HRNS 1247
BNC 75 Ohm Connectorized Cable [BNCM-BNCM, 3m]
1
Valiant Communications Limited - 2006-14
1
33
VCL-MX Version 3–DLX (Deluxe Version) - 4 E1 Voice & Data Multiplexer
Notes:____________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
_________________________________________________
Technical specifications are subjects to changes without notice.
Revision 09 – March 07, 2014.
U.K.
U.S.A.
INDIA
Valiant Communications (UK) Ltd
1, Acton Hill Mews,
310-328 Uxbridge Road,
London W3 9QN, United Kingdom
Valcomm Technologies Inc.
4000 Ponce de Leon, Suite 470
Coral Gables, FL 33146
U.S.A.
Valiant Communications Limited
71/1, Shivaji Marg,
New Delhi - 110015,
India
Valiant Communications Limited - 2006-14
34
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement