Bartscher 100083 Ice-cube maker W150 Operating instructions

W150
100083
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197
www.bartscher.com
Version: 1.0
Date of preparation: 2023-02-13
EN
2
Original instruction manual
1
Safety ............................................................................................................ 2
Explanation of Signal Words .................................................................... 2
Safety instructions.................................................................................... 3
Intended Use ........................................................................................... 6
Unintended Use ....................................................................................... 6
General information ....................................................................................... 7
2.1
Liability and Warranty .............................................................................. 7
2.2
Copyright Protection ................................................................................ 7
2.3
Declaration of Conformity ........................................................................ 7
Transport, Packaging and Storage ................................................................ 8
3.1
Delivery Check ......................................................................................... 8
3.2
Packaging ................................................................................................ 8
3.3
Storage .................................................................................................... 8
Technical Data............................................................................................... 9
4.1
Technical Specifications .......................................................................... 9
4.2
List of Components of the Appliance ..................................................... 10
4.3
Functions of the Appliance..................................................................... 10
Installation and operation ............................................................................ 11
5.1
Installation.............................................................................................. 11
5.2
Operation ............................................................................................... 12
Cleaning and Descaling ............................................................................... 15
6.1
Safety Instructions for Cleaning ............................................................. 15
6.2
Cleaning................................................................................................. 15
6.3
Descaling ............................................................................................... 15
Possible Malfunctions .................................................................................. 16
Disposal ....................................................................................................... 18
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
100083
1 / 18
Safety
Diese Bedi enungsanlei tung besc hrei bt di e Installation, Bedi enung und Wartung des Geräts und gilt als wic htige Infor mationsquelle un d N achschl agewer k. Di e Kenntnis aller enthaltenen Sic herheits hinweis e und H andlungs anweisungen schafft die Vorauss etz ung für das sichere und s ac hger echte Ar beiten mit dem Gerät. D arüber hi naus müs sen die für den Ei ns atz ber eic h des Geräts geltenden ör tlichen Unfall verhütungs vorsc hriften und allgemeinen Sicherheits besti mmungen eing ehalten wer den. Dies e Bedi enungs anleitung is t Bes tandteil des Produkts und muss i n unmi ttelbarer N ähe des Ger äts für das In¬s tall ations-, Bedi enungs-, Wartungs- und R einigungspers onal jederzeit z ugänglich auf¬bewahrt werden. Wenn das Ger ät an eine dritte Pers on
weiterg egeben wird, muss die Bedi enungsanlei tung mit ausgehändigt wer den.
Read this instruction manual before using and keep it available
at all times!
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1
EN
Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1
Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
2 / 18
100083
Safety
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
, di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2
EN
Safety instructions
Electrical Current
•
•
•
•
•
•
•
•
•
•
Too high a mains voltage or incorrect installation may cause electric shock.
The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
To avoid short-circuit, the appliance should be kept dry.
If there are malfunctions during operation, disconnect the appliance from the
power supply.
Do not touch the appliance’s plug with wet hands.
Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
Do not transport the appliance, holding it by the power cord.
Do not allow the power cord to come into contact with heat sources or sharp
edges.
Do not bend, pinch nor knot the power cord.
100083
3 / 18
Safety
•
•
•
•
Always completely unwind the power cord.
Never place the appliance or other objects on the power cord.
Always take hold of the plug to disconnect the appliance from the power supply.
Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Inc orrect operati on of the applianc e may c ause fire or explosi on haz ard due to igniti on of its content.
Fire hazard / flammable materials hazard / explosion hazard!
•
•
•
•
EN
•
•
•
•
•
•
Do not use any electric devices in the appliance.
Do not store nor use petrol or other flammable liquids and gases in the vicinity of
this or any other appliance. Those gases may cause fire or explosion hazard.
Do not put into the appliance any explosive materials, like sprays filled with
flammable propellants. Contents of containers filled with flammable gases and
liquids may leak in low temperatures, and the contents may catch fire from
sparks generated by an electric appliance. Explosion hazard!
In the case of coolant leakage, pull the plug from the socket. Remove all
sources of ignition in the vicinity, ventilate room and contact technical service.
Avoid coolant getting in contact with eyes, as it may cause serious eye damage.
Never use any flammable liquids for cleaning the appliance or its parts. Gases
released may cause fire or explosion hazard.
In the case of fire, disconnect the appliance from the power supply before
attempting adequate fire-extinguishing actions.
Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
Defrosting process may not be sped up with mechanical means or heat energy
sources (candles or heaters) nor with any other means. Vapour produced may
cause short-circuit and too high temperatures may damage the appliance.
All ventilation slots should not be obstructed during operation.
Never attempt to damage cooling installation of the appliance.
Halten Sie Verpac kungsmateriali en und Styropor teile von Ki ndern fern. They may g et embroiled and suffocate.
Operating Personnel
The device can be used by children of 8 years old and older, as well as by people
with reduced physical, sensory or mental abilities and those with limited
experience/knowledge as long as they are under supervision or have been
instructed on safe use of the device and possible risks. Children should not play
with the device.
Improper Use
•
Unintended or prohibited use may cause damage to the appliance.
4 / 18
100083
Safety
•
•
•
•
The appliance may only be used when its technical condition is flawless and
allows for safe operation.
The appliance may only be used when all connections are executed according
to rules of law in force.
The appliance may only be used when it is clean.
Use only original spare parts. Never attempt to repair the appliance on your own.
Do not introduce any changes in the appliance nor modify it.
•
•
Do not drill hole in the appliance nor install any objects on it.
Do not place any heavy objects on the appliance.
•
EN
100083
5 / 18
Safety
1.3
Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–
1.4
Ice cube preparation.
Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
EN
6 / 18
100083
General information
2
2.1
General information
Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2
Copyright Protection
EN
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3
Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
100083
7 / 18
Transport, Packaging and Storage
3
Transport, Packaging and Storage
3.1
Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2
EN
Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3
Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
8 / 18
100083
Technical Data
4
Technical Data
4.1
Technical Specifications
Name:
Ice-cube maker W150
Art. No.:
100083
Material:
Plastic
Tank volume, in litres:
2,3
Output / work cycle, pcs.:
24
Max. output, in kg /h:
15 / 24
Storage container capacity, in kg:
1,0
Coolant / amount in kg:
R600a / 0,035
Climate class:
ST
Power supply:
0,24 kW | 220-240 V | 50 Hz
Dimensions (W x D x H) in mm:
280 x 380 x 345
Weight in kg:
10,4
EN
We reserve the right to implement technical modifications!
Version / characteristics
•
•
•
•
•
•
•
•
•
•
Ice cube design: cube, clear
Water tank yield: up to 360 ice cubes
Water outlet: rear
Fill level sensor
Production method: vertical evaporator system
Cooling: compressor
Control: button, electronic
ON/OFF switch
Indicator lights: ON/OFF, storage tank full, refill tank
The set includes: ice cube shovel
100083
9 / 18
Technical Data
4.2
List of Components of the Appliance
EN
1.
3.
5.
7.
9.
Water tank cover
Water tank
Closing cover
Ice cubes shovel
Ice through
4.3
2. Control panel
4. Ventilation opening
6. Housing
8. Storage container
10. Storage container lid
Functions of the Appliance
The ice-cube maker is designed for production of ice cubes in various sizes.
10 / 18
100083
Installation and operation
5
Installation and operation
5.1
Installation
Unpacking / Positioning
•
Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•
•
•
•
•
If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
Be careful not to damage the rating plate and warning labels fixed on the
appliance.
Never place the appliance in humid or wet environment.
Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
•
•
•
•
•
•
Nie nal eż y umies zcz ać urządz eni a w g orąc ym otoczeniu ani w pobliż u materiał ów łatwopalnyc h.
The appliance requir es s ufficient airflow for pr oper operation. Ass ure a mini mum later al cl ear anc e of the appli ance of 10 c m.
Die Öffnungen am Gerät niemals abdec ken oder bl oc ki eren.
Do not position the appliance in high humidity locations. Air relative humidity
should not exceed 70%.
Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect
power consumption, and restrict functions of the appliance, too.
In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
•
•
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e to quic kl y disconnect the power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e to quic kl y disconnect the power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e to quic kl y disconnect the power c ord when nec ess ar y.
Keep minimum distance from walls and objects; maintain clearance of 15 cm at
both sides and at the rear, and 20 cm over the appliance.
100083
11 / 18
EN
Installation and operation
•
The appliance should be installed only in rooms, in which ambient temperature
falls in the range of 10°C – 32 °C.
Power supply connection
•
•
•
•
•
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
If in winter the appliance is brought from the outside to a room, leave it for a few
hours to heat up and reach the room temperature before switching it on.
Before connecting the appliance to the power supply, wait 1 hour for the coolant
to stabilize.
After a power failure or when the plug is removed from the socket, reconnect the
appliance to the power supply after 5 minutes at the earliest.
•
EN
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e to quic kl y disconnect the power c ord when nec ess ar y.
5.2
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e to quic kl y disconnect the power c ord when nec ess ar y.
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e to quic kl y disconnect the power c ord when nec ess ar y.
Operation
Preparation of the Appliance
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section 6 “Cleaning”.
2.
3.
4.
5.
Finally, dry the appliance and accessories thoroughly.
Insert the storage tank.
Remove the water tank lid.
Fill the water tank with fresh drinking water.
NOTE: Do not fill with water the tank underneath the storage container.
6. Make sure the water level does not exceed the 'FULL' marking.
7. Place the lid on the water tank.
12 / 18
100083
Installation and operation
Control Panel
Control Panel
1.
2.
3.
4.
Water tank indicator light
Storage container indicator light
ON/OFF switch indicator light
ON/OFF switch
EN
Start-up
1. Connect the appliance to a single grounded socket.
2. Turn the appliance on with the ON/OFF switch.
The ice cubes production process is started. Depending on the ambient
temperature, the production cycle lasts approx. 15–20 minutes.
3. To change the size of the ice cubes, press and hold the ON/OFF switch for 5
seconds.
The ice cubes production cycle is approx. 3 minutes longer and thus the ice cubes
become a little bit thicker.
4. Make sure you check the water level in the bottom tank underneath the storage
container regularly during operation of the appliance.
If there is not enough water to carry out the ice cubes production cycle, the
appliance automatically drains water from the large water tank to the bottom tank to
continue ice cubes production.
If there is not enough water in both bottom and large water tank, the appliance
automatically stops and the 'ADD WATER' indicator light is lit.
5. Switch the appliance off with the ON/OFF switch.
6. Fill the water tank with fresh drinking water, up to 'FULL' marking.
100083
13 / 18
Installation and operation
7. Wait a short while and run the production process, using ON/OFF switch to this
end.
CAUTION!
To provide for proper hygiene, exchange the water in water tank every 24
hours.
The appliance automatically stops the production process when the storage
container is full.
The 'FULL ICE' indicator light is lit.
8. Open the storage container lid and use the ice shovel to take the ice cubes out
of the storage container.
When the ice cubes are removed, the production of ice is continued.
CAUTION!
Due to hygienic reasons, the ice cubes produced during the first
production process should be disposed of; do not use them to cool
beverages nor food products.
EN
9. When the appliance is not to be used any more, it should be switched off with
the ON/OFF switch.
10. Unscrew the closing cover at the rear wall of the appliance and drain water from
the water tank.
NOTE: If the appliance will not be used for a prolonged time, drain the
water from both the main and bottom water tank, using the water drain at
the rear wall of the appliance to this end.
If the appliance is to be operated again after a longer break, conduct 2–3
ice cubes production cycles using fresh water in order to remove bacteria.
The ice cubes produced in the process should be disposed of.
14 / 18
100083
Cleaning and Descaling
6
Cleaning and Descaling
6.1
•
•
•
•
•
Before cleaning, disconnect the appliance from the power supply.
Leave the appliance to cool down completely.
Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2
1.
2.
3.
4.
5.
6.
7.
8.
Safety Instructions for Cleaning
Cleaning
At the end of a working day clean the appliance thoroughly.
Remove the storage container.
Wash the storage container in warm water.
Rotate the closing cover at the rear side of the appliance counter-clockwise to
drain the water.
Clean the appliance inside and outside with warm water and mild cleaning
agent.
Rinse in clean water.
Screw the closing cover onto the water drain.
After cleaning, dry and polish the surface with a soft and dry cloth.
6.3
Descaling
Inappropriate water may lead to scale deposit in the water tank of the appliance.
Such deposits may negatively affect the operation of the appliance. For this reason,
the appliance should be regularly descaled.
1. For descaling purposes, use a solution of water and vinegar or commercially
available descaling agent. Follow the product manufacturer’s instructions.
2. Fill the water tank with the solution.
3. Run the production cycle.
4. Unscrew the closing cover from the water drain.
5. Drain water from the water tank through the water drain.
100083
15 / 18
EN
Possible Malfunctions
6. Using fresh water, conduct 1–2 more production cycles, to remove all residues
of descaling solution.
CAUTION!
Dispose of the produced ice cubes; do not use them for cooling beverages
nor food products!
7. Once again drain water from the water tank.
8. Screw the closing cover onto the water drain.
7
Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
EN
Error
Possible Cause
Solution
The 'Add Water'
indicator light is lit.
No water.
Stop the appliance. Fill the
water tank with fresh
drinking water, up to the
'FULL' marking. Press the
ON/OFF switch to restart
the appliance.
The 'FULL ICE'
indicator light is lit.
There is too much ice in the
storage container.
Take the ice out of the
storage container.
16 / 18
100083
Possible Malfunctions
Error
Possible Cause
Solution
The water tank if
filled, but the 'ADD
WATER' indicator
light it lit.
Water is not pure, or there
are foreign objects in it.
Fill with fresh drinking
water.
The filter in the bottom tank
underneath the storage
container is clogged.
Clean the water filter.
Water flows out of
The water drain is
the water drain at the obstructed.
rear wall of the
appliance.
Clean the water drain.
The appliance does
not start the ice
production.
The water is not pure
enough.
Fill with fresh drinking
water.
The wall of the bottom tank
underneath the storage
container is dirty.
Clean the bottom tank.
Ice cubes are brittle.
Ambient temperature too
high.
Press and hold the
ON/OFF switch for 5
seconds. The ice cubes
production cycle will be
extended.
Ice cubes are not
being produced.
The ambient temperature or
water temperature in the
bottom tank is too high.
The appliance should be
used in an environment
with ambient temperature
up to 32 °C and with cold
water in the water tank.
Coolant is leaking.
Contact the service
company.
A tube obstructed in the
cooling system.
Contact the service
company.
The following phenomena are not malfunctions:
–
100083
During normal operation, a sound of water flowing is heard. This is a
sound of coolant flowing through the installation.
17 / 18
EN
Disposal
8
Disposal
Electrical Appliance
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
Electrical appliances should be returned to designated collection points.
Coolant
The propellant used in the appliance is flammable. It should be utilised pursuant to
national regulations in force.
EN
18 / 18
100083

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project