PROLED IP20 Flex Lightning Strip User Manual
PROLED IP20 is a versatile LED strip that offers a wide range of lighting possibilities. With its IP20 rating, it is suitable for indoor use and can be easily installed on various surfaces. PROLED IP20 is dimmable, allowing you to adjust the brightness to create the perfect ambiance for any occasion. It also features a long lifespan of up to 50,000 hours, ensuring years of reliable use.
Advertisement
Advertisement
FLEX STRIP IP20 / IP53 / IP68
Bedienungsanleitung
User manual
1
Montageanleitung / Installation manual
,
Vorwort
,
Vielen Dank, dass Sie sich für den PROLED FLEX STRIP entschieden haben. Bitte lesen Sie diese Anleitung vor der
Installation und Inbetriebnahme sorgfältig durch. Falls der Flex Strip beim Transport beschädigt wurde, benachrichtigen Sie bitte sofort ihren Händler. Bitte unternehmen Sie nichts, bevor Sie ihren Händler kontaktiert haben.
,
Garantiebestimmungen
,
Vom Tag des Kaufes an gewähren wir für unsere Produkte, bei sachgemäßer Verwendung im Falle von
Qualitätsmängeln, kostenlose Reparatur oder Austausch, außer in folgenden Fällen:
1. Defekte durch unsachgemäßen Betrieb.
2. Schäden durch unautorisierte Reparatur, Modifikation, falschem Anschluss oder Austausch von Chips.
3. Schäden durch Transport, Vibration usw. nach dem Kauf.
4. Schäden durch Erdbeben, Feuer, Blitzschlag, Verschmutzung oder Überspannung.
5. Schäden durch unsachgemäße Lagerung bei zu hohen Temperaturen, feuchter Umgebung oder in der Nähe von
Chemikalien.
6. Wenn das Produkt updatet wurde.
,
Sicherheitshinweise
,
1. Installieren Sie diesen Flex Strip nicht während eines Gewitters, bei starken Magnetfeldern oder
Hochspannungsfeldern. Achten Sie auf einen korrekten Anschluss, um das Risiko einer Beschädigung von
Komponenten oder eines Kurzschlusses zu minimieren.
2. Stellen Sie immer eine ausreichende Belüftung sicher, um die zulässige Betriebstemperatur einzuhalten.
3. Überprüfen Sie, ob das Netzteil den Leistungsanforderungen des Flex Strips entspricht und die Polung korrekt ist.
4. Führen Sie alle Anschlüsse nur im stromlosen Zustand durch und stellen Sie vor der Inbetriebnahme sicher, dass kein Kurzschuss vorhanden ist.
Zu Informationen über Updates wenden Sie sich bitte an Ihren Händler.
1. Produktbeschreibung
Der PROLED FLEX STRIP ermöglicht es verschiedene Arten von Beleuchtungen zu erstellen. Es können
Hauptbeleuchtungen, Hinterleuchtungen, Ambientebeleuchtungen etc. sowohl im Innen- wie auch Außenbereich oder sogar unter Wasser werden realisiert werden.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
2
Montageanleitung / Installation manual
2. Hinweise
Bitte beachten Sie nachfolgende Informationen zum Umgang mit Flex Strips.
Nicht knicken Während des Betriebes nicht abdecken
Nicht horizontal biegen Nicht an Netzspannung anschließen
Keinen übermäßigen Druck ausüben
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
3
Montageanleitung / Installation manual
3. Sicherheitshinweise
Montage nur entsprechend den lokalen Vorgaben
Montage nur von Fachpersonal durchführen lassen
Nur mit Class 2 Netzteilen benutzen
Das Netzteil muss die korrekte Spannung liefern. Diese darf nicht höher sein, als auf dem Flex Strip spezifiziert
Benutzen Sie für die Verkabelung nur Kabel die für min. 80°C spezifiziert sind
Benutzen Sie ausreichend dimensionierte Kabel. Fehlerhaft ausgelegte Kabel können zum Überhitzen und ggf. zu Feuergefahr führen. Das Kabel muss für die vorhandene Spannung und Strom zugelassen sein.
Benutzen Sie den Flex Strip nur bei einer Umgebungstemperatur von -10 – 45°C
IP20 & IP53 Flex Strips nicht auf leitenden Untergründen befestigen
4. Montageort
1. Montieren Sie den Flex Strip nicht in einer überhitzten Umgebung, z. B. neben einer Heizung, oder in einer schlecht kühlenden Umgebung.
2. Falls die Montage in einer feuchten Umgebung erfolgt, wählen Sie bitte für die Anwendung geeigneten Flex
Strip mit IP53 bzw. IP68 aus.
3. Benutzen Sie den Flex Strip nicht in einer aggressiven Umgebung, wie z.B. Schwefel-, Chlor-, Bromhaltig etc. a. Die Gasdämpfe können selbst durch die Silikonabdeckung diffundieren und mit der LED-Oberfläche in
Reaktion treten. Dadurch wird die Lichtausbeute empfindlich verringert und die Farbtemperatur verschoben. Des Weiteren erhöht sich der Widerstand und somit die Stromaufnahme. b. Organische Materialien welche N, P, S etc. enthalten.
Schwermetalle wie Sn, PB, Hg, Sb, Bi, As etc.
5. Montage
Prüfen Sie den Flex Strip vor dem Einkleben, aber im ausgerollten Zustand, auf korrekte Funktionsweise.
Nachträgliche Reklamationen können nicht anerkannt werden.
Schalten Sie die Hauptstromzuleitung ab und sichern Sie diese gegen wiedereinschalten.
Überprüfen Sie, ob die korrekten Geräte verbaut werden, d. h. dass das Netzteil die gleiche Spannung haben muss, wie der anzuschließende Strip.
Prüfen Sie bitte auch, ob das Netzteil ausreichende Reserve hat um z. B. Leitungsverluste auszugleichen sowie ob korrekte Leitungen verwendet werden, damit Spannungsverluste minimiert werden. Empfohlen wird, dass das Netzteil ca. 20 % mehr Leistung hat als die angeschlossene Last.
Beachten Sie die Polarität und schließen Sie die Leitungen korrekt an.
Der Klebeuntergrund darf nicht elektrisch leitend sein. Empfohlen wird das Einkleben z. B. in eloxierte
Aluminiumprofile.
Der Flex Strip darf nur an Stellen scharf gebogen werden, an denen sich keine elektronischen Bauteile befinden. Der minimale Biegeradius beträgt ca. 2 cm. Der Flex Strip darf nicht verdreht werden.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
4
Montageanleitung / Installation manual
Die Montage muss auf wärmeleitfähigen Untergrund erfolgen, welcher ausreichend dimensioniert ist, um die
Wärmeabfuhr des gewählten Flex Strip sicher stellt. Der Untergrund muss Fett-, Öl-, Silikon-, Staub- und
Schmutzfrei sein. Für die Reinigung empfehlen wir Isopropanol.
Montage auf unebenen, schlecht wärmeleitenden Untergründen wird nicht empfohlen und kann die
Lebensdauer verkürzen, wie auch die Befestigung des Flex Strips erschweren. Hierzu zählen Holz, Gipskarton,
Tapeten etc.
Vermeiden Sie das Kleben über Stoßstellen der Profile. Bedingt durch die thermische Ausdehnung bzw.
Schrumpfung kann es zu Beschädigung des Flex Strips kommen. Teilen Sie hierzu den Flex Strip an der
Schnittstelle und verwenden Sie flexible Verbindungen, z. B. Drahtbrücke.
Vorgehensweise bei Montage:
1. Ziehen Sie die Schutzfolie des Klebestreifens ein kurzes Stück ab
Unterseite mit Klebestreifen
2. Positionieren Sie den Flex Streifen und drücken ihn leicht an. Verwenden Sie keine scharfen oder metallischen Gegenstände.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
5
Montageanleitung / Installation manual
3. Scheiden Sie die überschüssige Länge an der Schnittstelle mit einer Schere ab.
4. Beachten Sie bitte, dass ein bereits festgeklebter Streifen nicht entfernt werden darf. Hierbei kommt es zu
Beschädigungen der elektronischen Bauteile oder der Lötstellen, welche nicht unter die Garantie /
Gewährleistung fallen.
5. Reststücke können verwendet werden. Hierzu muss ein neues Anschlusskabel angelötet werden.
6. Anschlussschema
Die folgenden Grafiken verdeutlichen den Anschluss des Flex Strips. Den genauen Anschlussplan entnehmen
Sie bitte dem Steuergerät / Dimmer.
Anschluß eines monochromatischen Flex Strips ohne Dimmer
Netzteil
12-24 VDC
Flex Strip Länge gemäß Spezifikation Flex Strip Länge gemäß Spezifikation
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
6
Anschluß eines monochromatischen Flex Strips mit Dimmer
Montageanleitung / Installation manual
Netzteil
12-24 VDC
Flex Strip Länge gemäß Spezifikation
Anschluß eines RGB Flex Strips mit Dimmer
Netzteil
12-24 VDC
Flex Strip Länge gemäß Spezifikation
Flex Strip Länge gemäß Spezifikation Flex Strip Länge gemäß Spezifikation
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
7
Montageanleitung / Installation manual
7. Anlöten von Leitungen bei IP53 Flex Strips
Falls Sie eine Zuleitung an einen Flex Strip IP53 anlöten müssen, gehen Sie bitte wie folgt vor.
Schneiden Sie den Flex Strip an der Schnittstelle. Entfernen Sie das Silikon über den Lötpads und löten Sie das Kabel korrekt an. Bitte auf richtige
Polarität achten.
Dichten Sie die Lötstelle mit etwas säurefreiem
Silikon ab, z. B. PROLED Abdichtkleber L6396.
Scheiden Sie ein kurzes Stück Schrumpfschlauch zurecht.
Verschließen Sie die Lötstelle mit Schrumpfschlauch Achten Sie darauf, dass die Schutz- Folie des
Klebebandes abgezogen werden kann.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
8
Montageanleitung / Installation manual
8. Anlöten von Leitungen bei IP68 Flex Strips
Falls Sie eine Zuleitung an einen Flex Strip IP68 anlöten müssen, gehen Sie bitte wie folgt vor. Beachten Sie bitte, dass die korrekt abgedichteten Endkappen nur einen IP65 Schutz darstellen.
Schneiden Sie den Flex Strip an der gewünschten
Stelle.
Entfernen Sie das Silikon über den Lötpads und löten Sie das Kabel korrekt an. Bitte auf richtige
Polarität achten.
4
Schneiden Sie ein Loch für die Zuleitung in die
Endkappe.
Schieben Sie die Endkappe über die Zuleitung.
Durchstechen Sie mit der Kappe den Tubenauslass, Schrauben Sie den Auslasstrichter auf die Tube des.Abdichtklebers, z. B. PROLED L6396.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
9
Montageanleitung / Installation manual
Schneiden Sie den Auslasstrichter schräg an. Füllen Sie die Endkappe komplett mit dem Kleber aus.
Schieben Sie die Endkappe auf den Strip, so dass diese über die Lötstelle reicht.
Hinweis :
Bitte die neu verklebte Endkappe mindestens 24 h unbewegt trocknen lassen. Bitte beachten Sie auch, dass Silikon nicht wartungsfrei ist. Die Verklebung muss regelmäßig, jedoch mindestens 1x pro Jahr, kontrolliert und bei Bedarf ausgebessert werden.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
10
Montageanleitung / Installation manual
9. Befestigung von IP68 Flex Strips
Für die Befestigung der Flex Strip IP68 existieren entsprechende Kunststoffhalterungen.
Nachfolgend sehen Sie Beispiele, wie diese angebracht werden können.
Halteschraube
Clip
Flex Strip IP68
10. Fehlerbehebung
Nachfolgend sehen Sie einige Fehler und ihre Auswirkungen
Bitte zulässigen Biegeradius beachten!
Flex Strips wurden vor
Fertigstellung eingebaut. Beim
Streichen gelangte Farbe auf die
LEDs und verursachte eine
Verschiebung der Lichtfarbe.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
11
Montageanleitung / Installation manual
Die Verlegung des Flex Strips erfolgte nicht gleichmäßig über gesamte Länge. Dadurch ist der
Lichtaustritt unterschiedlich.
Zuleitungskabel wurde nicht ordentlich verlegt.
Es bildet sich ein Schattenwurf an der
Wand.
01.21 Technische Änderungen vorbehalten
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
12
Montageanleitung / Installation manual
,
Preface
,
Thanks for choosing the PROLED FLEX STRIP. Before installation and use, we strongly recommend you to read this manual carefully. If the Flex Strip has been damaged during transport, please report this to your supplier immediately.
Please don’t take any action without contacting your supplier first.
,
Limited Warranty
,
In case of quality problems we provide free repair or replacement from the day of purchase, if this product has been used properly in accordance with the user’s manual, except in following cases:
1. Any defects caused by wrong operation.
2. Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and replacement of chips.
3. Any damages due to transportation, vibration etc. after purchase.
4. Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
5. Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near harmful chemicals.
6. Product has been updated
,
Safety Warnings
,
1. Please don’t install this Flex Strip during thunderstorms, intense magnetic or high-voltage electrical fields. Take care about correct connections to minimize the risk of damage of components or short circuits.
2. Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
3. Check if the power supply fulfills the voltage and power requirements of the Flex Strip as well as the polarity.
4. Make all connections only in powerless condition and make sure that no short circuit is existing before switching on the Flex Strip.
Please contact your local dealer for updates.
1. Product description
PROLED FLEX STRIP allows to make different types of illuminiation. It can be used for main illumination, for background illuminiation, ambiente illumination etc. as well as inside or outside or even under water.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
13
2. Cautions
Please follow below information using Flex Strips.
Montageanleitung / Installation manual
Do not bend sharply Do not cover during working
Do not bend horizontaly Do not connect to mains supply
Do not expose to pressure
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
14
Montageanleitung / Installation manual
3. Safety cautions
Installation only according to local specifications
Installation only by professional staff
Use only Class 2 power supplies
Power supply must have correct voltage. Voltage must correspond to voltage listed on Flex Strip
Use only cables which are specified for more than 80°C
Use correct dimension of cables. Wrong cables can lead to overheat and eventually result in fire. Cable must be approved for the existing voltage and current
Use the Flex Strip only at an ambient temperature of -10 – 45°C
Do not stick IP20 & IP53 Flex Strips on conductive surfaces
4. Installation place
1. Do not install the Flex Strip in an overheated ambient, for example near a radiator, or in a bad cooling surrounding.
2. If the installation is in a high humidity surrounding, please use, suitable for the application, Flex Strip IP53 or
IP68.
3. Do not use the Flex Strip in an aggressive surrounding, for example containing sulfur, chlorid, brom etc. a. Gas vapour can diffuse through the silicon cover and react with the LED surface. Due to this, the light output will be significant lower and a temperature shift can’t be avoided. Further more the resistance will rise, which result in higher current. b. Organic materials, which contains N, P, S.
Heavy metals like Sn, PB, Hg, Sb, Bi, As etc.
5. Installation
Check the correct function of the Flex Strip, but in unrolled shape, before fixing it. Complains after installation can not be accepted.
Switch off the mains supply and secure it against switching on.
Please check if the correct units will be installed, this means that the power supply must have same voltage like the connected Flex Strip.
Please check if the power supply has enough power, for example to compensate power loss due to long cables and if the correct cables are used to minimize voltage loss. It is suggested that the power supply has ca.
20% more power than the connected load.
When connecting the cables, please take care about the polarity.
Adhesive surface must be non-conductive. It is recommended to stick the Flex Strips into anodized aluminium profiles.
Flex Strip can only be bend sharply at areas with no electronical components. The minimum bending radius is
2 cm. Flex Strip is not allowed to be twisted.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
15
Montageanleitung / Installation manual
Installation must be made on a heat disposal underground, which is adequate dimensioned, to remove the heat of the desired Flex Strip. The underground must be free of greas, oil, silicone, dust and dirt. We suggest
Isopropanol for cleaning.
Installation on uneven, low heat-conductive grounding is not suggested as the life time will be shorted and make fixing difficult. These include wood, plaster board, wallpaper etc.
Avoid fixing over profile splice. Because of thermal expanding or shrinking a damage of Flex Strip can happen.
Divide the Flex Strip in this case and use flexible connections, for example wire strap.
Installation steps:
1. Remove the protection foil of the adhesive tape
Lower side with adhesive tape
2. Place the Flex Strip in the profile and stuck it gently. Do not use any sharp or metallic tools.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
16
Montageanleitung / Installation manual
3. Cut away the not needed part of the Flex Strip, with a scissor, at the marked cutting line.
4. Please pay attention, that an already sticked Flex Strip should not be removed again. It is possible that electronical parts or soldering points will break , which isn’t covered by guarantee or warrenty.
5. Rest pieces can be used at other project. Only connection cable must be soldered to the Flex Strip.
6. Connection diagram
Following diagrams show the connection of Flex Strips. Please refer to the manual of your controller/dimmer for exact connection diagram.
Connection of monochromatic Flex Strips without dimmer
PSU
12-24 VDC
Flex Strip length according to specifications Flex Strip length according to specifications
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
17
Connection of monochromatic Flex Strips with dimmer
PSU
12-24 VDC
Montageanleitung / Installation manual
Flex Strip length according to specifications
Connection of RGB Flex Strips with Dimmer
PSU
12-24 VDC
Flex Strip length according to specifications
Flex Strip length according to specifications Flex Strip length according to specifications
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
18
Montageanleitung / Installation manual
7. Soldering of cables at IP53 Flex Strips
If you have to solder a connection to a Flex Strip IP53, please work according to following steps.
Cut the Flex Strip on marked cutting line. . Remove silicone from the soldering pads and
Solder the cable correctly. Please take care about correct polarity.
Cover the soldering point with acid free silicone for example PROLED sealing glue L6396.
Cut a small piece of heat shrink tube.
Cover the soldering point with heat shrink tube Take care that the security foil of the adhesive tape can be removed.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
19
Montageanleitung / Installation manual
8. Soldering of cables at IP68 Flex Strips
If you have to solder a connection to a Flex Strip IP68, please work according to following steps. Please be advised, that correctly sealed end caps have only a IP65 classification.
Cut the Flex Strip on marked cutting line. Remove the silicone from the soldering pads.
Solder the cable correctly . Please take care about correct polarity.
4
Cut a hole for power cable into the end cap. Move the end cap over the cable.
Pierce the tube outlet with the cap of the sealing glue, for example PROLED L6396.
Screw the outlet funnel on the tube.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
20
Montageanleitung / Installation manual
Cut the funnel diagonally. Fill the end cap completely with the glue.
Move the end cap over the strip, so that the soldering pads are covered.
Caution:
Please leave new glued end cap minimum 24 h without movement for drying. Please be advised, that silicone is not a maintenance-free. The glue must be checked regularly, but at least once a year, and must be replaced if needed.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
21
Montageanleitung / Installation manual
9. Fixing of IP68 Flex Strips
For fixing of Flex Strip IP68 is possible with corresponding plastic clips. Following please see examples, how they can be attached.
Fixing screw
Clip
Flex Strip IP68
10. Trouble shooting
Following you will see some failures and their results
Please note the permitted bending radius!
Flex Strips has been installed before finishing the room. During painting work paint has been placed on LED and caused a colour shift.
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
22
Montageanleitung / Installation manual
Placing of s trip wasn’t made equal over the whole length.
Due to this the light output is different on some positions.
Supply cable wasn‘t placed correctly.
Shadow of cables is visible on the wall.
01.21 Technical amendments reserved
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany www.proled.com
23

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- IP20 rating for indoor use
- Dimmable for adjustable brightness
- Long lifespan of up to 50,000 hours
- Easy installation on various surfaces
- Versatile lighting options for different applications