- Computers & electronics
- Audio & home theatre
- Video converters
- Sima
- eXtenHD XCON-YUV
- Operation manual
Sima eXtenHD XCON-YUV Operation Manual
Add to my manuals4 Pages
Sima eXtenHD XCON-YUV is a device that can convert digital HDMI signals to analog component video (YCbCr/YPbPr) and audio signals. It has two HDMI inputs and one set of component video outputs, as well as both digital coaxial and analog stereo audio outputs. This allows you to connect two HDMI devices, such as a DVD player and a game console, to a single TV or projector that only has component video inputs. The XCON-YUV also supports resolutions up to 1080p and is HDCP compliant, so it can be used with protected content.
Here are some possible use cases for the Sima eXtenHD XCON-YUV:
- Connecting a Blu-ray player or other HDMI device to a TV or projector that only has component video inputs
advertisement
©2007 Sima Products Corporation
140 Pennsylvania Ave. Bldg #5
Oakmont, PA 15139 www.extenHD.com
ExtenHD™ is a registered trademark of Sima Products Corporation
PN 21760
Dual HDMI to HD
Component Converter
Model XCON-YUV
Operation Manual
ExtenHD XCON-YUV
Cautions and Warnings
User Manual
IMPORTANT SAFEGUARDS FOR AUDIO PRODUCTS. PLEASE READ CAREFULLY THE FOLLOWING
IMPORTANT SAFEGUARDS THAT ARE APPLICABLE TO YOUR EQUIPMENT
1. Read instructions - All the safety and operating instructions should be read before the appliance is operated.
2. Retain instructions - The safety and operating instructions should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
4. Follow instructions - Follow all operating and use instructions.
5. Water and Moisture - the appliance should not be used near water - for example: near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool.
6. Ventilation - The appliance should be located so that its location or position does not interfere with proper ventilation. For example: the appliance should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings.
7. Heat - keep away from heat sources such as radiators, registers, stoves or other heat-producing appliances .
8. Power sources - the appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.
9. Grounding or polarization. - Precautions should be taken so that the polarization or grounding means of the appliance is not defeated. Caution: To prevent electric shock, match the wide blade of this plug to the wide slot, fully insert. Do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
10. Power cord Protection - Power supply cords should be routed so they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and where they exit from the appliance.
11. Cleaning - Wipe unit with a damp cloth occasionally to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.
12. Nonuse periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.
13. Object and Liquid entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.
14. Damage requiring service - The appliance should be serviced by qualified personnel when: the power cord has been damaged, objects have fallen or liquids spilled into the appliance, the appliance has been exposed to rain, does not appear to operate normally or exhibits a marked change in performance or the unit has been dropped or the enclosure damaged.
15. Service - The user should not attempt to service the appliance beyond that described in the operating manual. All other servicing should be referred to qualified service personnel.
Notice to Users
The system may cause interference to a TV or radio even when it is operating properly. To determine whether the system is causing the interference, turn it off. If the interference goes away, the system is causing the interference.
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.
•Contact your dealer for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two Conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
ExtenHD XCON-YUV User Manual
One Year Limited Warranty
Sima Products Corporation, (“Sima”) warrants that if the accompanying product proves to be defective to the original purchaser in material or workmanship within one
(1) year from the original retail purchase, the Company will, at the its option, either repair or replace same without charge (but no cash refund will be made).
What you must do to enforce Warranty
You must deliver, mail or ship the product, together with the original bill of sale, this limited Warranty statement as proof of warranty coverage to:
Sima Products Corporation
Attn: Customer Service
140 Pennsylvania Ave., Bldg. #5,
Oakmont, PA 15139
Fax: 412-828-3775
It is recommended that you call Sima Products Corporation before sending the unit in for service.
Limitation of Liability and Remedies
This warranty is void if any defects are caused by abuse, misuse, negligence or unauthorized repairs. All liability for incidental or consequential damages is specifically excluded. The Company shall have no liability for any damages due to lost profits, loss of use or anticipated benefits, or other incidental, consequential, special or punitive damages arising from the use of, or the inability to use, this product, whether arising out of contract, negligence, tort or under any warranty, even if the
Company has been advised of the possibility of such damages. The Company’s liability for damages in no event shall exceed the amount paid for this product. The
Company neither assumes nor authorizes anyone to assume for it any other liabilities.
Some states do not allow for the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may have other rights, which vary from state to state.
Page 2 ©2007 by Sima Products Corp. All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means without prior written permission from Sima Products Corp.
Page 7
ExtenHD XCON-YUV User Manual
XCON-YUV Specifications
Input: 2 x HDMI female ports
Output: Video: High definition component YPbPr/YCbCr on 3 RCA connectors
Audio: Digital audio on CO-AX or analog audio on R/L
Power: 5V DC power supply
Dimensions: 215(W) x 112(D) x 42(H)mm
Weight: 750gs
ExtenHD XCON-YUV User Manual
Introduction
XCON-YUV is an HDMI to component (YCbCr/YPbPr) converter with audio output. It allows you to switch between 2 HDMI sources and convert it to component and analog audio (L/R) or digital audio (Coaxial) output at the same time. It supports high definition up to 1080p, and output resolution follows input.
•
•
Features
• Compliant with HDMI 1.2a, HDCP 1.1 and DVI 1.0 specifications.
•
•
Supports a wide range of resolutions: 480i/480p/576i/576p/720p/
1080i/1080p@50/60Hz.
Supports digital audio output through Co-axial cable, or analog audio output through L/R audio cable.
IR remote control.
HDCP compliant - when input is HDCP encrypted (protected),the
INPUT LED will blink. In the meantime, the component out will be turned off, unless input resolution is among 480p/i, 576p/i which can still output through component connector.
Page 6 Page 3
ExtenHD XCON-YUV
Operation Controls and Functions
1 2
User Manual
POWER
XCON-YUV
HDMI to Component
Converter
Front Panel
1.
2.
3.
1 2 3
Remote control sensor.
INPUT Select/Indicators: Press the “INPUT” button repeatedly to switch to your desired input source and the LED will illuminate to indicate which input source is selected.
POWER: Press the “POWER” button to turn on/off power of the unit.
1
INPUT
2
COAXIAL L R
OUTPUT
Pr/Cr Pb/Cb Y
DC 5V 1A
ExtenHD XCON-YUV User Manual
1
1
3
2
Remote Control
1.
2.
3.
4.
Power: Press the button to turn on/off the unit.
HDMI 1 IN input select: Press the button to select HDMI 1 input source.
HDMI 2 IN input select: Press the button to select HDMI 2 input source.
Void buttons (No function.)
Connection and Installation
DVD
HDMI
HDMI
Cable
MI
STB
HDMI
HDMI
Cable
MI
Rear Panel
1 2 3 4 5 6
1.
2.
3.
4.
5.
6.
HDMI 1 IN: Connect the HDMI 1 IN port to the output port of your
HDMI source equipment such as DVD Player or Set-top-box.
HDMI 2 IN: Connect the HDMI 2 IN port to the output port of your
HDMI source equipment such as DVD Player or Set-top-box.
COAXIAL OUT:Connect the coaxial audio output port to the input port of your audio equipment such as amplifier using coaxial cable.
AUDIO OUT: Connect the L/R audio output port to the input port of your display or audio equipment such as amplifier using L/R audio
(2RCA) cable.
YPbPr/YCbCr Output: Connect the YPbPr/YCbCr output (3 RCA) ports to the video input ports of your display equipment such as
HDTV.
Power: Plug the 5VDC power supply into the unit and connect the adaptor to AC wall outlet.
Page 4
Co-ax
Cable
Amplifier
XCON-YUV
L/R
Cable
3RCA to
3RCA Cable
HDTV
Page 5
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project