advertisement
Installation Instructions
Smart Curtain
Control Module
Product Code:
KASTA-C300IBH
APP Installation
Visit www.kasta.com.au or your app store to download the free KASTA app. iOS: requires iOS 9.0 or later.
Android: requires Android 4.4 or later.
Devices must support Bluetooth 4.0
Important Safety Information
•This product must be installed by a licensed
electrician in accordance with all the
requirements of AS/NZS 3000 (current
edition) and other relevant Standards and
Regulations.
•Electricity MUST be disconnected prior to
installation.
Failure to do so may result in serious injury
and or loss of life.
•Indoor use only. Not suitable for damp or
explosive environments.
•Switching circuit is not suited for
interconnection with SELV circuits.
May be interconnected with Class I or Class II
equipment only.
Do not interconnect with Class III equipment.
•Complies to Australian Standards
AS/NZS 60669.2.1 with AS/NZS 60669.1,
AS/NZS 60950.1. AS/NZS CISPR 15.
•No user serviceable parts inside. ver 1.4
A
N
FEATURES
• Mains powered curtain control module.
• Compatible with standard bidirectional motors.
3-wire:
Active wire (Control wire) – used for up/down control
Earth wire (Power wire)
Netural wire (Power wire)
4-wire:
Active wire (Control wire) – used for up control
Active wire (Control wire) – used for down control
Earth wire (Power wire)
Netural wire (Power wire)
• Single phase 240AC max. or 24VDC max. power.
• Simple 7 wire connection – A, N, Com, Open, Close, S1, S2.
• Install in conjunction with an appropriately rated momentary action mechanisms to S1 and S2.
• Can be paired with KASTA remote switches for either single button operation or two button
operation (8x maximum).
• Smart functions via phone/tablet with the app such as schedules, timers, scenes and groups.
• Built in overvoltage and overcurrent protection.
• To prevent a reduction in Bluetooth ® signal strength, install away from metal objects.
FUNCTION SETUP
*First calibrate curtain using KASTA app.
S1 CONNECTION
ON/PAUSE 1 CLICK
Open or pause curtain.
OPEN UNTIL RELEASED
Curtain opens until button is released.
LONG PRESS
1 CLICK
LONG PRESS
ON/PAUSE
Close or pause curtain.
CLOSE UNTIL RELEASED
Curtain closes until button is released.
DELAY TO OFF
Curtain will automatically close after set time.
PAIRING MODE
Enter pairing mode for multi-way control. Lights will pulse.
FACTORY RESET
Restores all settings back to factory.
3 CLICKS*
6 CLICKS
9 CLICKS
TECHNICAL SPECIFICATIONS
Supply: 220-240V AC 50Hz
Operating Temp: -20ºc to 40ºc
CONNECTION DIAGRAM
A
S1
S2
A N com
A
M
A
S1
S2
A
AN com
GND
DC+
M
A
N kasta.com.au | (02) 9168 5900
advertisement
Related manuals
advertisement