Visual Presenter Image Software User Manual
queueTM
(V 4.X)
(for MAC )
Visual Presenter Image Software
User Manual
Date: 2009/07/03
0
Contents
1.
Introduction ..................................................................... 2
2.
System requirement........................................................ 2
3.
Install............................................................................... 2
4.
Start to use queue™ ....................................................... 6
5.
Operation ........................................................................ 7
5.1 Main Menu................................................................................... 7
5.2 Annotation Tools .......................................................................... 8
5.3 Camera Settings.......................................................................... 8
5.4 Options ........................................................................................ 9
5.5 Time Lapse .................................................................................. 9
6.
Descriptions of Functions ............................................. 10
6.1 Start the Visual Presenter.......................................................... 10
6.2 I would like to capture images ................................................... 10
6.3 I would like to display the live image ......................................... 10
6.4 I would like to freeze the live image........................................... 10
6.5 I would like to annotate the displayed image............................. 10
6.6 I would like to add textual annotation to images ........................ 11
6.7 I would like to record video ........................................................ 13
1
1. Introduction
queue PC and USB driver which support WIA and TWAIN standards.
After installing the USB driver and queue application, you can use the software to:
¾
Control the Visual Presenter.
¾
Capture and record images.
¾
Annotate images, highlight important details and save them for later use.
2. System requirement
¾
¾
¾
¾
¾
¾
MAC OS X v10.4.10, v10.5
CPU: PowerPC G4 866MHz or Intel Pentium® 1.83GHz Intel Core 2 Duo processor
Memory: 512MB
1,024x768 screen resolution and 24-bit color display
Minimum Hard Disc Space Required: 1GB
QuickTime 7.4.5 above
3. Install
<Very Important> To ensure successful installation, please make sure each of the
following steps is completed.
3.1. Connect the power cord of the Visual Presenter.
3.2. Turn on the Visual Presenter.
3.3. Connect USB cable to the Visual Presenter and your computer.
3.4. Go to Lumens™ website http://www.lumens.com.tw/eng/goto.asp and select the model you
have purchased.
2
3.5. Find the [ queue 4.0+ Driver] and press
to download.
3.6. After finding [queue_4 install], double-click it to start the Installation Wizard.
3.7. Click [Continue].
3.8. Click [Continue].
3.9. Click [Upgrade].
3
3.10.Key in the name and password then click [OK].
3.11.Click [Continue].
4
3.12.Click [Restart] to finish installing the software.
5
4. Start to use queue™
4.1. Select [Go] / [Applications].
4.2. Click [queue].
4.3. Click the queue™ icon to launch main functions menu
Æ
6
5. Operation
5.1 Main Menu
LAMP:
POWER:
Turn the lamp
Turn the visual presenter on / off
AUTO TUNE:
on / off
PREVIEW:
Automatically adjust the image for
best possible quality.
OPTIONS:
Display live images
BRIGHTNESS:
Select video compression method
and the audio source.
MAIN:
Adjust image brightness
ZOOM:
Launch the main functions menu
Right click on this icon to show
information about the queue.
Zoom in/out from the image
CAMERA SETTING:
ADVANCE:
Launch the Camera Setting window
to adjust live images
Launch the advanced functions menu
ANNOTATION:
FREEZE:
Display annotation tools
Freeze a live image
CLOSE:
TIME LAPSE PHOTOGRAPHY:
Close the advanced functions menu
Capture images at a pre-set intervals
CAPTURE:
RECORD:
Capture still images
Record videos
7
5.2 Annotation Tools
ICON
Description
ICON
Description
ICON
Description
Pointer tool
Laser tool
Insert text
Draw a line
Draw an ellipse
Draw a rectangle
Free-hand drawing tool
Eraser
Clear all
Select line thickness
Select pen color
5.3 Camera Settings
Control the live image via the Camera Settings interface. The operating procedure is the same as the
remote control and control panel of the Visual Presenter. Refer to the Visual Presenter user
manual for more information.
<Note> The display of the button may vary depending on product functions. An inactive button
will grey out.
8
5.4 Options
¾
Video Compress type:Set the video
format.
¾
Enable Audio Recorder:Enable the audio
record device and set the audio source.
¾
Audio Source :Select audio source
¾
Audio Compress type:Set the audio
format.
5.5 Time Lapse
.
Select file directory to change
the default.
Specify a file name..
Set the start time.
Capture images at a pre-set
intervals .
9
6. Descriptions of Functions
6.1 Start the Visual Presenter
8.1.1 Click
6.2 I would like to capture images
<NOTE> You can click
to change time lapse setting before capture
images, more details please refer to 7.5 Time Lapse.
8.2.1 Click
then a Save As window will be displayed.
8.2.2 Key in the file name then click [Save].
6.3 I would like to display the live image
8.3.1 Click
to display the live image.
6.4 I would like to freeze the live image
8.4.1 Click
to freeze the live image of queue™.
6.5 I would like to annotate the displayed image
8.5.1 Click
to open the annotation tools.
8.5.2 The default mode is [Pointer Tool]. You can select another annotation tool.
10
8.5.3 Select a color for drawing.
8.5.4 Set the value of Line width (If the value is higher, the line is thicker).
8.5.5 Mark or annotate the displayed image.
to capture images that you draw.
<Remark> You can Click
6.6 I would like to add textual annotation to images
8.6.1
Click
to open the annotation tools.
8.6.2
Select [Text Tool].
11
8.6.3
The [Text Tool] window will pop up when you click the screen for the text to be
added in.
8.6.4
Enter the text in blank fields and click [OK].
8.6.5
Click [T] to change font’s settings (size/color/effect).
<Remark> You can Click
to capture images that you draw.
12
6.7 I would like to record video
<NOTE> You can click
to change video format and audio source
setting before recording, more details please refer to 7.4 Options.
8.7.1 Click
to open the video tool.
8.7.2 Click [Record] then a window will be displayed.
8.7.3 Key in the file name then click [Save] to start recording. <insert image>
8.7.4 Click [Stop] to stop recording.
8.7.5 Click
to close the record tool.
13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement