MAZi V2.0 CMS User Manual
MAZi CMS V2.0 is a versatile video management software that provides real-time live view, video recording, remote search and playback, file backup, and other functionalities. It is designed for DVRs, NVRs, IP cameras, encoders, decoders, and other devices for surveillance tasks.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
▼
Scroll to page 2
of
79
MAZi CMS User Manual User Manual (V2.0) UD.6L0201D1102A01 User Manual of MAZi CMS V2.0 Contents Chapter 1 1.1 1.2 1.3 Chapter 2 2.1 2.2 Overview ....................................................................................................................... 4 Description .................................................................................................................... 4 Running Environment.................................................................................................... 4 Function Modules ......................................................................................................... 5 Live View ....................................................................................................................... 7 User Registration and Login .......................................................................................... 7 Adding the Encoding Device.......................................................................................... 8 2.2.1 Adding Online Devices....................................................................................... 9 2.2.2 Adding Devices Manually ................................................................................ 10 2.2.3 Adding Devices by IP Segment ........................................................................ 11 2.2.4 Adding Devices by IP Server ............................................................................ 12 2.2.5 Adding Devices by HiDDNS .............................................................................. 13 2.3 Group Management .................................................................................................... 14 2.4 Basic Operations in Live View...................................................................................... 17 2.4.1 Starting and Stopping the Live View ...................................................................... 20 2.4.2 Auto-switch in Live View ........................................................................................ 22 2.4.3 PTZ Control in Live View ......................................................................................... 23 2.4.4 Manual Recording and Capture.............................................................................. 26 2.4.5 Instant Playback ..................................................................................................... 30 2.4.6 Other Functions in Live View.................................................................................. 32 Chapter 3 Remote Record Schedule Settings and Playback......................................................... 33 3.1 Remote Recording ............................................................................................................. 33 3.2 Recording on Storage Devices on the DVRs, NVRs, or Network Cameras ................... 33 3.2.2 Recording on Storage Server ........................................................................... 37 3.3 Remote Playback ......................................................................................................... 39 3.3.3 Normal Playback.............................................................................................. 39 3.3.4 Event Playback................................................................................................. 41 3.3.5 Synchronous Playback ..................................................................................... 43 Chapter 4 Event Management ..................................................................................................... 44 4.2 Configuring Motion Detection Alarm .......................................................................... 44 4.3 Configuring Tampering Alarm ..................................................................................... 47 4.4 Configuring PIR Alarm ................................................................................................. 48 4.5 Configuring Video Loss Alarm ..................................................................................... 50 4.6 Configuring Alarm Input Linkage ................................................................................. 51 4.7 Configuring Device Exception Linkage......................................................................... 52 4.8 Viewing Alarm and Event Information ........................................................................ 53 Chapter 5 E-map Management.................................................................................................... 55 5.2 Adding an E-map ......................................................................................................... 55 5.3 The Hot Spot Function ................................................................................................ 57 5.3.2 Adding Hot Spots ............................................................................................. 57 5.3.3 Modifying Hot Spots........................................................................................ 59 5.3.4 Previewing Hot Spots ...................................................................................... 59 5.4 The Hot Region Function ............................................................................................. 60 1 User Manual of MAZi CMS V2.0 5.4.5 Adding Hot Regions ......................................................................................... 60 5.4.6 Modifying Hot Regions .................................................................................... 61 5.4.7 Previewing Hot Regions................................................................................... 62 Chapter 6 Log Management ........................................................................................................ 63 Chapter 7 Account Management and System Configuration....................................................... 65 7.1 Account Management ................................................................................................. 65 7.2 System Configuration .................................................................................................. 66 7.2.1 General Settings .............................................................................................. 67 7.2.2 File Saving Path Settings .................................................................................. 68 7.2.3 Keyboard and Joystick Shortcuts Settings ....................................................... 69 7.2.4 Alarm Sound Settings ...................................................................................... 70 7.2.5 Email Settings .................................................................................................. 71 Chapter 8 Forwarding Video Stream through Stream Media Server ........................................... 72 8.1 Adding the Stream Media Server ................................................................................ 72 8.2 Adding Cameras to Stream Media Server to Forward Video Stream .......................... 73 Chapter 9 Decoding and Displaying Video on Video Wall............................................................ 74 9.2 Adding the Decoding Device ....................................................................................... 75 9.3 Configuring Video Wall Settings .................................................................................. 75 9.4 Displaying Video on Video Wall................................................................................... 77 Troubleshooting .............................................................................................................................. 78 2 User Manual of MAZi CMS V2.0 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact the dealer. This manual applies to MAZi CMS. This manual may contain several technically inaccurate points or printing errors, and the content is subject to change without notice. The updates will be added into the new version of this manual. We will readily improve or update the products or procedures described in the manual. 3 User Manual of MAZi CMS V2.0 Chapter 1 Overview 1.1 Description MAZi CMS is a versatile video management software for the DVRs, NVRs, IP cameras, encoders, decoders, etc. It provides multiple functionalities, including real-time live view, video recording, remote search and playback, file backup, etc., for the connected devices to meet the needs of monitoring task. With the flexible distributed structure and easy-to-use operations, the client software is widely applied to the surveillance projects of medium or small scale. This user manual describes the function, configuration and operation steps of MAZi CMS software. To ensure the properness of usage and stability of the software, please refer to the contents below and read the manual carefully before installation and operation. 1.2 Running Environment Operating System: Microsoft Windows 7/Windows 2008(32/64-bit operating system), Windows 2003/Windows XP(32-bit operating system) CPU: Intel Pentium IV 3.0 GHz or above Memory: 1G or above Display: 1024*768 or above For high stability and good performance, these above system requirements must be met. The software does not support 64-bit operating system; the above mentioned 64-bit operating system refers to the system which supports 32-bit applications as well. 4 User Manual of MAZi CMS V2.0 1.3 Function Modules Menu Bar: Click the button on the upper-left side of the software to open the menu bar. The Menu Bar contains following aspects: Table 1-1: Aspects of Menu Bar Open Captured picture Open Video File File Open Log File Exit Lock Switch User System Import System Config File Export System Config File 1024*768 Search and view the captured pictures stored on local PC. Search and view the video files recorded on local PC. View the backup log files. Exit the MAZi CMS client software. Lock screen operations. Log in the client again to unlock. Switch the login user. Import client configuration file from your computer. Export client configuration file to your computer. Display the window at size of 1024*768 pixels. 1280*1024 Display the window at size of 1280*1024 pixels. 1440*900 Display the window at size of 1440*900 pixels. 1680*1050 Display the window at size of 1680*1050 pixels. View Full Screen Main View Remote Playback E-map Auxiliary Screen Preview Display the window in full screen. Open Main View page. Open Remote Playback page. Open E-map page. Open Auxiliary Screen Preview window. 5 User Manual of MAZi CMS V2.0 Device Management Event Management Record Schedule Account Management Log Search Tool System Configuration Broadcast Device Arming Control I/O Control Player Message Queue Open Wizard Open the Device Management page. Open the Event Management page. Open the Record Schedule page. Open the Account Management page. Open the Log Search page. Open the System Configuration page. Select device to start broadcasting. Set the arming status of devices. Turn on/off the alarm output. Open the player to play the video files. Display the information of Email message to be sent. Open the guide for the client configuration. Click to open the User Manual; you can User Manual (F1) also open the User Manual by pressing F1 on your keyboard. Help About View the basic information of the client software. Select the language for the client software Language and reboot the software to activate the settings. You can check the local PC information, including network usage, CPU usage, memory usage in the upper-middle side of the main page and general information of current user and time, in the upper-right corner of the main page. 6 User Manual of MAZi CMS V2.0 Chapter 2 Live View 2.1 User Registration and Login For the first time to use MAZi CMS client software, you need to register a super user for login. Figure 2-1 Steps: 1. Input the super user name and password. 2. Confirm the password. 3. Optionally, check the checkbox Enable Auto-login to log in the software automatically. 4. Click Register. Then, you can log in the software as the super user. —— A user name cannot contain any of the following characters: / \ : * ? “ < > | The password cannot be empty and the length of the password should be no less than six characters. When opening MAZi CMS after registration, you can log in the client software with the registered user name and password. Figure 2-2 Steps: 1. Input the user name and password you registered. 2. Optionally, check the checkbox Enable Auto-login to log in the software automatically. 3. Click Login. 7 User Manual of MAZi CMS V2.0 —— After running the client software, a wizard will pop up to guide you to add the device and do some basic settings. 2.2 Adding the Encoding Device Purpose: After running the MAZi CMS, devices including network cameras, video encoders, DVRs, NVRs, should be added to the client for the remote configuration and management, such as live view, playback, alarm settings, etc. Perform the following steps to enter the Encoding Device Adding interface: Steps: 1. Click the button on the upper-left side of the software to open the menu bar. Figure 2-3 2. Click Tools->Device Management to open the Device Management page. 3. Click the Server tab. 4. Click Encoding Device to enter Encoding Device Adding interface. —— You can add devices in the following ways: By detecting the online devices, see Section Adding Online Devices. By specifying the device IP address, see Section Adding Devices Manually. By specifying an IP segment, see Section Adding Devices by IP Segment. By IP Server, see Section Adding Devices by IP Server. By HiDDNS, see Section Adding Devices by HiDDNS. 8 User Manual of MAZi CMS V2.0 2.2.1 Adding Online Devices Purpose: The active online devices in the same local subnet with the client software will be displayed on a list. You can click the Refresh Every 15s button to refresh the information of the online devices. Steps: 1. Select the devices to be added from the list. 2. Click Add to Client to open the device adding dialog box. Figure 2-4 3. Input the required information. Nickname: Edit a name for the device as you want. Address: Input the device’s IP address. The IP address of the device is obtained automatically in this adding mode. 4. Port: Input the device port number. The default value is 8000. User Name: Input the device user name. By default, the user name is admin. Password: Input the device password. By default, the password is 12345. Optionally, you can check the checkbox Export to Group to create a group by the device name. All the channels and alarm inputs of the device will be imported to the corresponding group by default. 5. Click Add to add the device. —— Click Add All to add all the online devices to the client software. Enter the username and password for authentication. You can also click-drag the device in the Online Device list in to Added Device list to open the device adding dialog box. 9 User Manual of MAZi CMS V2.0 Figure 2-5 You can modify the network information of a selected device in the Online Device list by clicking Modify Netinfo. You can also restore the default password of the selected device by clicking Restore Default Password. Figure 2-6 2.2.2 Adding Devices Manually Steps: 1. Click Add Device to open the device adding dialog box. 10 User Manual of MAZi CMS V2.0 Figure 2-7 2. Select IP/Domain as the adding mode. 3. Input the required information. Nickname: Edit a name for the device as you want. Address: Input the device’s IP address or domain name. Port: Input the device port number. The default value is 8000. User Name: Input the device user name. By default, the user name is admin. Password: Input the device password. By default, the password is 12345. 4. Optionally, you can check the checkbox Export to Group to create a group by the device name. All the channels and alarm inputs of the device will be imported to the corresponding group by default. 5. Click Add to add the device. —— 2.2.3 Adding Devices by IP Segment Steps: 1. Click Add Device to open the device adding dialog box. Figure 2-8 11 User Manual of MAZi CMS V2.0 2. Select IP Segment as the adding mode. 3. Input the required information. Start IP: Input a start IP address. End IP: Input an end IP address in the same network segment with the start IP. Port: Input the device port number. The default value is 8000. User Name: Input the device user name. By default, the user name is admin. Password: Input the device password. By default, the password is 12345. 4. Optionally, you can check the checkbox Export to Group to create a group by the device IP. All the channels and alarm inputs of the device will be imported to the corresponding group by default. 5. Click Add, and the device of which the IP address is between the start IP and end IP will be added to the device list. —— 2.2.4 Adding Devices by IP Server Steps: 1. Click Add Device to open the device adding dialog box. Figure 2-9 2. Select IP Server as the adding mode. 3. Input the required information. Nickname: Edit a name for the device as you want. Server Address: Input the IP Server address. Device ID: Input the device ID registered on the IP server. User Name: Input the device user name. By default, the user name is admin. Password: Input the device password. By default, the password is 12345. 4. Optionally, you can check the checkbox Export to Group to create a group by the device name. All the channels and alarm inputs of the device will be imported to the corresponding group by default. 5. Click Add to add the device. —— 12 User Manual of MAZi CMS V2.0 2.2.5 Adding Devices by HiDDNS Steps: 1. Click Add Device to open the device adding dialog box. Figure 2-10 2. Select HiDDNS as the adding mode. 3. Input the required information. Nickname: Edit a name for the device as you want. Server Address: www.hiddns.com. Device Domain Name: Input the device domain name registered on HiDDNS server. User Name: Input the device user name. By default, the user name is admin. Password: Input the device password. By default, the password is 12345. 4. Optionally, you can check the checkbox Export to Group to create a group by the device name. All the channels and alarm inputs of the device will be imported to the corresponding group by default. 5. Click Add to add the device. —— MAZi CMS also provides a method to add the offline devices, as shown in Figure 2-10. Tick the checkbox Add Offline Device, input the required information and the device channel count, and then click Add. The software will automatically connect to the offline device as it comes online. The devices will be displayed on the device list for management after added. You can check the resource usage, HDD status, recording status, and other information of the added devices on the list. Click Refresh All to refresh the information of all added devices. You can also input the device name in the filter field for search. Select device from the list, click Modify/Delete, and then you can modify or delete the information of the selected device. Select device from the list, click Remote Config, and then you can do some remote configurations of the selected device if needed. 13 User Manual of MAZi CMS V2.0 2.3 Group Management Purpose: The added devices can be organized into groups for a convenient management. You can get the live view, play back the record files, and do some other operations of the device through the group. Before you start: Devices need to be added to the client software first. Perform the following steps to enter the Group Management interface: Steps: 1. Open the Device Management page. Figure 2-11 2. Click the Group tab to enter the Group Management interface. —— Adding the Group Steps: 1. Click Add Group to open the Add Group dialog box. 14 User Manual of MAZi CMS V2.0 Figure 2-12 2. Input a group name as you want. 3. Click OK to add the new group to the group list. You can also tick the checkbox Create Group by Device Name to create the new group by the name of the selected device. —— Importing Encoding Device to Group Steps: 1. Click Import on Group Management interface, and then click the Encoding Channel tab to open the Import Encoding Channel page. Figure 2-13 2. Select the encoding channels in the channel list. 3. Select a group from the group list. 4. Click Import to import the selected encoding channels to the group. 15 User Manual of MAZi CMS V2.0 You can also click Import All to import all the encoding channels to a selected group. —— You can also click the icon Up to 64 cameras can be added to one group. on the Group panel to add a new group. The following buttons are available on the Import Encoding Channel page: Table 2-1 Buttons on Import Encoding Channel Page Button Name Description List View View the encoding channel in list view. Thumbnail View View the encoding channel in thumbnail view. Refresh Refresh the latest information of added encoding channels. Import Create a group by device name and import the device to group. Collapse/Expand Collapse/Expand the thumbnails of encoding channels. Editing the Group/Channel Steps: 1. Select the group/channel from the group list on the Import Encoding Channel page. Figure 2-14 2. Click the icon , or double-click the group/channel name to open Modify Group/Camera dialog box. 3. Edit the group/channel information, including the group/camera name, the camera type, etc. 16 User Manual of MAZi CMS V2.0 4. Click OK to save the new settings. —— You can also double-click the group/channel name on the Group Management interface to open the Modify Group/Camera dialog box. Deleting Channels from the Group Steps: In Import Encoding Channel page: 1. Select the channel from the group list. 2. Click to remove the channel from the group. If you prefer to remove all the channels from a group, please select the group in the group list on the Import Encoding Channel page, and Click the icon on the right of the group name. —— In Group Management page: 1. Click Encoding Channel under the group name on the left panel of the page. The linked channels will be listed on the right side. 2. Select a channel and click to delete the channel from the group. —— Deleting the Group Steps: 1. Select the group on the Group Management page. 2. Click Delete Group or click the icon and the selected group will be deleted. —— 2.4 Basic Operations in Live View Purpose: For the surveillance task, you can view the live video of the added network cameras and video encoders on the Main View page. And some basic operations are supported, including picture capturing, manual recording, PTZ control, etc. Before you start: A camera group is required to be defined for live view. Click View->Main View to open the Main View page. Main View Page: 17 User Manual of MAZi CMS V2.0 Figure 2-15 Table 2-2 Description of Main View Page No. Name 1 View List 2 Camera List 3 PTZ Control Panel 4 Display Window of Live View 5 Live View Toolbar Camera Status: The camera is online and works properly. The camera is in live view. The camera is in recording status. The camera is offline. Live View Toolbar: Figure 2-16 The descriptions of all buttons on the Tool Bar are shown as below: Table 2-3 Buttons on Tool Bar Button Name Description Set View Set the screen layout mode and save the new settings for the current view; save the current view as another new view. Stop Live View Previous Next Resume/Pause Stop the live view of all cameras. Go for live view of the previous page. Go for live view of the next page. Click to resume/pause the auto-switch in live view. Auto-switch 18 User Manual of MAZi CMS V2.0 Show /Hide the Menu Show/Hide the configuration menu of auto-switch. Click again to hide. Mute/Audio On Turn off/on the audio in live view Full Screen Display the live view in full screen mode. Press ESC to exit. Right-click on the display window in live view to open the Live View Management Menu, as shown in Figure 2-17 Figure 2-17 The descriptions of all items on the menu bar are shown as below: Table 2-4 Items on Menu Bar Button Name Stop Live View Capture Description Stop the live view in the display window. Capture the picture in the live view process. Print Captured Picture Capture the current picture and then print the picture. Send Email Capture the current picture and then send an Email notification to one or more receivers. The captured picture can be attached. Start/Stop Recording Start/Stop the manual recording. The record file is stored in the PC. Open Window PTZ Control Enable PTZ control function on the display window. Click again to disable the function. Open Digital Zoom Enable the digital zoom function. Click again to disable the function. Switch to Instant Playback Switch to instant playback mode. Start/Stop Two-way Audio Click to start/stop the two-way audio of the camera in live view. Enable/Disable Audio Camera Status Click to enable/disable the audio in live view. Display the status of the camera in live view, including the recording status, signal status, connection number, 19 User Manual of MAZi CMS V2.0 etc. Remote Configuration Open the remote configuration page of the camera in live view. Synchronization Sync the camera in live view with the PC running the client software. Full Screen Display the live view in full screen mode. Click the icon again to exit. 2.4.1 Starting and Stopping the Live View Starting Live View for One Camera Steps: 1. Open the Main View page. 2. Optionally, click the icon in live view toolbar, then click the screen layout button and select the screen layout mode for live view. 3. Click-and-drag the camera to the display window, or double-click the camera name after selecting the display window to start the live view. —— In live view mode, you can exchange display windows for cameras by clicking-and-dragging them. Starting Live View for Camera Group Steps: 1. Open the Main View page. 2. Click-and-drag the group to the display window, or double-click the group name to start the live view. —— The display window number is self-adaptive to the camera number of the group. Only one group can be displayed at a time. Starting Live View in Default View Mode Purpose: The video of the added cameras can be displayed in different view modes. 4 frequently-used default view modes are selectable: 1-window Division, 4- Window Division, 9- Window Division and 16window Division. 20 User Manual of MAZi CMS V2.0 Steps: 1. Open the Main View page. 2. Click the icon 3. Select a default view mode, so the video of the added cameras will be displayed automatically in in the View panel to expand the default view list. a sequence in the display windows which are arranged as the selected view mode. —— Right-click the current default view name on the list and click Save View As., and you can save the default view as a custom view. Starting Live View in Custom View Mode Purpose: The view mode can also be customized for the video live view. Steps: 1. Open the Main View page. 2. Click the icon 3. Click New View in the custom view list to create a new view. 4. Input the view name and click Add. The new view is of 4-Screen mode by default. 5. Optionally, Click the icon to expand the custom view list. in live view toolbar, then click the screen layout button and select the screen layout mode for the new view. 6. Click-and-drag the camera/group to the display window, or double-click the camera/group name in custom view mode to start the live view. 7. Click the icon to save the new view. —— Right-click the custom view name on the list, and a menu pops up as follows: Figure 2-18 The descriptions of all the items on the menu are shown as below: Table 2-5 Items on Custom View Menu Item Name Description Edit View Name Edit the name of the custom view. Delete View Delete the custom view. Save View Save the new settings of the custom view. Save View As. Save the current view as another custom view. 21 User Manual of MAZi CMS V2.0 Stopping the Live View Steps: 1. Select the display window. 2. To stop live view of the selected window: Click the icon that appears in the upper-right corner when the mouse pointer is over the display window, Click Stop Live View on the right-click menu to stop the live view of the display window. Click the button in live view toolbar to stop all the live view. —— 2.4.2 Auto-switch in Live View Camera Auto-switch Purpose: The video stream of the cameras from the same group will switch automatically in a selected display window in camera auto-switch. Steps: 1. Open the Main View page. 2. Select a display window for camera auto-switch. 3. Click the icon 4. Select a group and click the icon 5. You can click the icon in the toolbar and select the switching interval. / on the group node. to pause/resume the camera auto-switch. —— Single View Auto-switch Purpose: The video of all the cameras on the camera list will switch automatically in a selected default view in single view auto-switch. Steps: 1. Open the Main View page. 2. Click the icon 3. Select a default view and click the icon 4. You can click the icon in the toolbar and select the switching interval. / on the selected view node. to pause/resume the single view auto-switch. 22 User Manual of MAZi CMS V2.0 —— Multi-view Auto-switch Purpose: The custom views will switch automatically in multi-view auto-switch. The custom views need to be added before proceeding. Steps: 1. Open the Main View page. 2. Click the icon 3. Click the icon 4. You can click the icon in the toolbar and select the switching interval. on the custom view node. / to pause/resume the multi-view auto-switch. —— 2.4.3 PTZ Control in Live View The software provides PTZ control for cameras with pan/tilt/zoom functionality. You can set the preset, patrol and pattern for the cameras on the PTZ Control panel. And you can also open window PTZ control for the operations of PTZ cameras. Click the icon to expand the PTZ Control panel on the lowwer-left side of the Main View page. The PTZ control Panel is shown as in Figure 2-19. Figure 2-19 The descriptions of all buttons on the control panel are shown as follows: Zoom Focus Iris Auxiliary Focus 23 User Manual of MAZi CMS V2.0 3D Positioning Light Wiper Lens Initialization To activate the PTZ control bar, you need to make the camera in the live view mode first. Configuring the Preset A preset is a predefined image position which contains information of pan, tilt, focus and other parameters. Perform the following steps to add a preset: Steps: 1. Click the Preset button to enter the PTZ preset configuration panel. Figure 2-20 2. Click the direction buttons on the PTZ control panel to steer the camera to the desired view. 3. Select a PTZ preset number from the preset list and click . Figure 2-21 4. Input the name of the preset in the pop-up dialog box. 5. Click OK to save the settings. —— Other operations: To call a configured preset, double-click the preset, or select the preset and click the icon To modify a configured preset, select the preset from the list and click the icon . . 24 User Manual of MAZi CMS V2.0 To delete a configured preset, select the preset from the list and click the icon . Configuring the Pattern A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions. Perform the following steps to add a pattern: 1. Click the Pattern button to enter the PTZ pattern configuration panel. Figure 2-22 2. Click to start recording of this pattern path. 3. Use the direction buttons to control the PTZ movement. 4. Click 5. Click the icon to stop and save the pattern recording. to call the pattern. To stop calling the pattern, click . —— Only one pattern can be configured, and the newly-defined pattern will overwrite the previous one. Configuring the Patrol A patrol is a scanning track specified by a group of user-defined presets, with the scanning speed between two presets and the dwell time at the preset separately programmable. Before you start: Two or more presets for one PTZ camera need to be added. Perform the following steps to add and call a patrol: 1. Click the Patrol button to enter the PTZ patrol configuration panel. 25 User Manual of MAZi CMS V2.0 Figure 2-23 2. Select a track number from the drop-down list. 3. Click to add a preset, and set the dwell time and patrol speed for the preset. Figure 2-24 4. Repeat the above operation to add other presets to the patrol. 5. Optionally, you can click 6. Click the icon or to edit or delete a preset in the patrol path. to call the patrol. To stop calling the patrol, click . —— The presets created before are acquiescently added into path1. Up to 16 patrols can be configured. The preset dwell time can be set to 1~255 sec, and the patrol speed can be set to level 1~40. 2.4.4 Manual Recording and Capture Toolbar in Each Live View Display Window: Figure 2-25 26 User Manual of MAZi CMS V2.0 The descriptions off all buttons in the Tool Bar are shown as below: Table 2-6 live View Window Tool Bar Attributes Button Name Capture Start/Stop Recording Switch to Instant Description Capture the picture in the live view process. Start/Stop manual recording. The record file is stored in the PC. Switch to the instant playback mode. Playback Manual Recording in Live View Purpose: Manual Recording function allows you to record the live video on the Main View page manually and the record files are stored in the local PC. Steps: 1. Move the mouse pointer to the display window in live view to show the toolbar. 2. Click in the toolbar of the display window or on the right-click Live View Management Menu to start the manual recording. The icon 3. Click the icon turns to . to stop the manual recording. A prompt box with the saving path of the video files you just recorded will pop up if all the operations succeed. —— During the manual recording, an indicator window. The saving path of video files can be set on the System Configuration interface. For details, see appears in the upper-right corner of the display Section File Saving Path Settings. 27 User Manual of MAZi CMS V2.0 Viewing Local Record Files Steps: 1. Click File->Open Video File to open the Record Files page. Figure 2-26 2. Select the camera to be searched from the Camera Group list. 3. Click the icon 4. Click Search. The video files recorded between the start time and end time will be displayed. to specify the start time and end time for the search. To delete the file, select the video file, and click Delete. To send an Email notification with the selected video file attached, Select the video file, and click Email Linkage. To save a new copy of the video file, select the video file, and click Save as. —— To send an Email notification, the Email settings need to be configured before proceeding. For details, see Section Email Settings. Double-click the video file and the video file can be played back locally. Figure 2-27 28 User Manual of MAZi CMS V2.0 The following buttons are available on the local playback page: Table 2-7 Buttons on the Local Play Back Page Button Name CIF/4CIF Full Screen Close Pause/Play Stop Speed Description Display the video in cif/4cif resolution. Display the local playback page in full screen mode. Close the local playback page of the record files. Pause/Start the playback of the record files. Stop the playback of the record files. Set the playback speed. Single Frame Play back the record files frame by frame. Digital Zoom Enable the digital zoom function. Click again to disable. Enable/Disable Audio Click to enable/disable the audio in the local playback. Capture Capture the picture in the playback process. Capturing Picture in Live View Steps: 1. Move the mouse pointer to the display window in live view to show the toolbar. 2. Click the icon in the toolbar of the display window or on the right-click Live View Management Menu. A small window of the captured picture with its saving path will be displayed to notify whether the capturing operation is done or not. Figure 2-28 —— The saving path of the captured pictures can be set on the System Configuration interface. For details, see Section File Saving Path Settings. Viewing Captured Pictures The pictures captured in live view are stored in the PC running the software. You can view the captured pictures if needed. Steps: 1. Click File->Open Captured Picture to open the Captured Picture page. 29 User Manual of MAZi CMS V2.0 Figure 2-29 2. Select the camera to be searched from the Camera Group list. 3. 4. Click the icon to specify the start time and end time for the search. Click Search. The pictures captured between the start time and end time will be displayed. 5. Double-click the captured picture to enlarge it for a better view. To print the selected picture, select the captured picture, and click Print. To delete the selected picture, select the captured picture, and click Delete. To send an Email notification with the selected picture attached, select the captured picture, and click Email Linkage. To save a new copy of the selected picture, select the captured picture, and click Save as. 2.4.5 Instant Playback Purpose: The record files can be played back instantly on the Main View page. Instant playback shows a passage of the video which was remarkable, or which was unclear on the first sight. Thus, you can get an immediate review if needed. Before you start: The video files need to be recorded on the storage devices, such as the SD/SDHC cards and HDDs on the DVRs, NVRs, Network Cameras, etc., or on the storage servers. Steps: 1. Start the live view and move the mouse pointer to the display window to show the toolbar. 30 User Manual of MAZi CMS V2.0 Figure 2-30 2. Click the icon in the toolbar and a list of time periods pops up. 30s, 1 min, 3 min, 5 min, 8 min, and 10 min are selectable. 3. Select a time period to start the instant playback. Example: If the current time of the live view is 09:30:00, and you select 3 min, then the instant playback will start from 09:27:00. 4. Click the icon again to stop the instant playback and go back for the live view. —— During the instant playback, an indicator window. The live view process will continue after the instant playback completed. appears in the upper-right corner of the display Right-click on the display window to open the Instant Playback Management Menu: Figure 2-31 31 User Manual of MAZi CMS V2.0 The following buttons are available on the right-click Instant Playback Management Menu: Table 2-8 Buttons on Instant Playback Management Menu Button Name Pause/Play Stop Speed Up/Down Single Frame Open Digital Zoom Capture Print Captured Picture Send Email Description Pause/Start the instant playback in the display window. Stop the instant playback and return to the live view mode. Increase/Decrease the play speed of the instant playback. Play back the record file frame by frame. Enable the digital zoom function. Click again to disable the function. Capture the picture in the instant playback process. Capture the current picture and then print the picture. Capture the current picture and then send an Email notification to one or more receivers. The captured picture can be attached. Start/Stop Recording Start/Stop clipping the record files. Enable/Disable Audio Click to turn on/off the audio in instant playback. Switch to Live View Full Screen Switch to live view mode. Display the instant playback in full screen mode. Click again to exit. 2.4.6 Other Functions in Live View There are some other functions supported in the live view, including digital zoom, two-way audio, camera status and synchronization. Auxiliary Screen Preview The live video can be displayed on different auxiliary screens for the convenient preview of multiple monitoring scenes. Up to 3 auxiliary screens are supported. Digital Zoom Select Open Digital Zoom on the right-click Instant Playback Management Menu. Use the left key of mouse to drag a rectangle area in the lower-right/upper-left direction, and then the rectangle area will zoom in/out. Two-way Audio Two-way audio function enables the voice talk of the camera. You can get not only the live video but also the real-time audio from the camera. This two-way audio can be used for only one camera at one time. Camera Status The camera status, such as recording status, signal status, connection number, etc., can be detected and displayed for check. The status information refreshes every 10 seconds. Synchronization The synchronization function provides a way to synchronize the live video clock with the PC which 32 User Manual of MAZi CMS V2.0 runs the client software. Chapter 3 Remote Record Schedule Settings and Playback When the video storage devices are the HDDs, Net HDDs, SD/SDHC cards on the local device, or the remote storage server connected, you can set the record schedule for the cameras for the continuous, alarm triggered or command triggered recording. And the record files can be searched for the remote playback. 3.1 Remote Recording Purpose: The video files can be recorded on the HDDs, Net HDDs, SD/SDHC cards on the local device, or the storage server connected. Click Tool->Record Schedule to open the Record Schedule page. As shown in Figure 3-1 Figure 3-1 3.2 Recording on Storage Devices on the DVRs, NVRs, or Network Cameras Purpose: Some local devices, including the DVRs, NVRs, and Network Cameras, provide storage devices such as the HDDs, Net HDDs and SD/SDHC cards for record files. You can set a record schedule or capture schedule for the channels of the local devices. 33 User Manual of MAZi CMS V2.0 The pictures captured through the capture schedule are stored on the local device and can be searched on the remote configuration page of the device. Before you start: The newly installed storage devices need to be formatted. The steps are as follows: Steps: 1. Click Storage Sever Management, as shown in Figure 3-1. 2. Click Remote config. 3. Click Storage->General, select the HDD or SD/SDHC card, and click Format to initialize the selected storage device. —— Steps: 1. Open the Record Schedule page. 2. Select the camera in the Camera Group list. 3. Check the checkbox Record Schedule under Local Recording to enable device local recording. 4. Select the record schedule template from the drop-down list. All-day Template: for all-day continuous recording. Weekday Template: for working-hours continuous recording from 8:00 AM to 8:00 PM. Alarm Template: for motion detection or alarm input triggered recording. Template 01-08: fixed templates for specific schedules. You can edit the templates if needed. Custom: can be customized as desired. If you need to edit or customize the template, see Configuring Record Schedule Template 5. Click Advanced Settings to set the recording parameters, as shown in Figure 3-2. For details, see Table 3-1 Advanced Recording Settings. Figure 3-2 6. Optionally, click Copy to… to copy the record schedule settings to other channels. 7. Click Save to save the settings. —— 34 User Manual of MAZi CMS V2.0 Table 3-1 Advanced Recording Settings Parameters Pre-record Post-record Descriptions Normally used for the event triggered record, when you want to record before the event happens After the event finished, the video can also be recorded for a certain time. The time for keeping the record files in the storage device, once exceeded, Video Expired Time the files will be deleted. The files will be saved permanently if the value is set as 0. Redundant Record Record Audio Save the video files not only in the R/W HDD but also in the redundant HDD. Record the video files with audio or not. If the devices do not support redundant record, the parameter Redundant Record will not be displayed on the Advanced Recording Settings panel. Configuring Record Schedule Template Perform the following steps to configure the record schedule template: If Template 01-08 is selected from the drop-down list, start from step 1, as shown in Figure 3-3; If Custom is selected from the drop-down list, start from step 2, as shown in Figure 3-4. Figure 3-3 35 User Manual of MAZi CMS V2.0 Figure 3-4 Steps: 1. Click Edit to enter the Templates Management interface. Select the template to be set and you can edit the template name. 2. Set the time schedule for the selected template. The icon refers to normal schedule record. The schedule time bar is yellow green. The icon refers to the schedule record for the alarm input or motion detection event. The schedule time bar is dark orange. The icon refers to the schedule record triggered by command. The schedule time bar is green. Record triggered by command is only available for the ATM transactions when the ATM DVR is added to MAZi CMS. 3. When the cursor turns to , you can edit the schedule time bar. When the cursor turns to , you can move the selected time bar you just edited. When the cursor turns to , you can lengthen or shorten the selected time bar. Optionally, you can select the schedule time bar, and then click the icon or click the icon 4. to delete the selected time bar, to delete all the time bars, or click the icon to copy the time bar settings to the other dates. Click OK to save the settings. You can click Save as Schedule Template on the Custom Schedule interface, and then the custom template can be saved as template 01--08. —— Up to 8 time periods can be set for each day in the record schedule. 36 User Manual of MAZi CMS V2.0 3.2.2 Recording on Storage Server Purpose: The storage server performs as a NVR installed on the PC. The record files can be stored in the storage server and you can search the files for remote playback. Before you start: The storage server application software needs to be installed and it is packed in the MAZi CMS software package. When installing the MAZi CMS, check the checkbox Storage Server to enable the installation of storage server. Adding the Storage Server Steps: 1. Click the shortcut icon on the desktop of your local PC to run the storage server. You can also record the video files on the storage server installed on other PC. 2. Open the Device Management page and click the Server tab. Figure 3-5 3. Click Add New Device Type, select Storage Server and click OK. 4. Click Storage Server on the list to enter the Storage Server Adding interface. —— You can add the storage server in the following ways: By detecting the online devices, see Section Adding Online Devices. By specifying the device IP address, see Section Adding Devices Manually. By specifying an IP segment, see Section Adding Devices by IP Segment. By IP Server, see Section Adding Devices by IP Server. 37 User Manual of MAZi CMS V2.0 Formatting the HDDs The HDDs of the storage server need to be formatted for the record file storage. Steps: 1. Select the added storage server from the list and click Remote Config. 2. Click Storage->General, to enter the HDD Formatting interface. Figure 3-6 3. Select the HDD from the list and click Format. You can check the formatting process from the process bar and the status of the formatted HDD changes from Raw to Normal Status. —— Formatting the HDDs is to pre-allocate the disk space for storage and the original data of the formatted HDDs will not be deleted. Configuring Storage Server Record Schedule Before you start: The storage server needs to be added to the client software and the HDDs need to be formatted for the record file storage. Steps: 1. Open the Record Schedule page. 2. Select the camera from the Camera Group list. 3. Check the checkbox Storage Server to enable recording on storage server. 4. Select the storage server from the drop-down list. 5. Select the record schedule template from the drop-down list. If you need to edit or customize the template, see Configuring Record Schedule Template 6. Click Advanced Settings to set the pre-record time, post-record time and video expired time. 7. Click Save to save the settings. —— 38 User Manual of MAZi CMS V2.0 3.3 Remote Playback Purpose: The record files stored on the local device or the storage server can be searched by custom view, camera or triggering event, and then can be played back remotely. Click View->Remote Playback to open the Remote Playback page. Figure 3-7 Remote Playback Page: Table3-2 Items of Remote Playback Page Number Name 1 View List, Camera List and Event List 2 Calendar 3 Search Options 4 Search Result List 5 Display Window of Playback 6 Playback Toolbar 7 Timeline 3.3.3 Normal Playback Purpose: The record files can be searched by custom view or camera for the Normal Playback. Searching Record Files for Normal Playback Steps: 1. Open the Remote Playback page. 2. Click 3. Select the view or camera to be searched from the list. 4. Select the day to be searched on the calendar. to expand the View List or Camera List on the left-side. 39 User Manual of MAZi CMS V2.0 You can also click to show more search options, and then click the icon to specify the start time and end time for the search. 5. Click Search. The record files of the selected view or camera will be displayed on the Search Result list. You can filter the results through the Filter text field. —— You can also search the record files by the card number (only applicable to ATM DVR) or by the file type. If there are record files for that camera in that day, in the calendar, the icon for that day is displayed as . Otherwise it is displayed as . Up to 16 cameras can be searched simultaneously. Figure 3-8 Normal Playback After searching the record files for the normal playback, you can play back the record files in the following two ways: Playback by File List Double-click the record file to play the video on the display window of playback or click the icon on the toolbar to start the playback from the first record file; Playback by Timeline The timeline indicates the time duration for the record file, and the record files of different types are color coded. Click on the timeline to play back the video of the specific time. You can click You can click or or to scale up or scale down the timeline bar. to go to the previous or the next time period. You can use the mouse wheel to zoom in or zoom out on the timeline. The remote playback display panel is shown as in Figure 3-10 40 User Manual of MAZi CMS V2.0 Figure 3-9 Normal Playback Toolbar: Figure 3-10 The descriptions of all buttons on the Toolbar are shown as below: Table 3-3 Buttons on the Normal Playback Toolbar Button Name Speed Async/Sync Playback Stop Playback Pause/Start Description Click to adjust the playback speed. Click to play back the record files synchronously/asynchronously. Stop the playback of all cameras. Pause/Start the playback of the record files. Playback Single Frame Volume Full Screen Play back the record files frame by frame. Click to turn on/off the audio and adjust the audio volume. Display the video playback in full screen mode. Press ESC to exit. You can move the slider on the Playback Speed Bar to set the playback speed. 3.3.4 Event Playback Purpose: The recordings triggered by motion detection or alarm input can be searched for Event Playback and this function requires the support of the connected device. Searching Record Files for Event Playback 41 User Manual of MAZi CMS V2.0 Steps: 1. Open the Remote Playback page. 2. Click 3. Click Motion Detection or Alarm Input, and select the cameras or alarm input sensors. 4. Select the day to be searched on the calendar. to expand the Event List on the left-side. You can also click to show more search options, and then click the icon to specify the start time and end time for the search. 5. Click Search. The recordings from the selected cameras and sensors triggered by motion detection or alarm input will be displayed on the Search Result list. —— Event Playback After searching the recordings triggered by the event, you can play back the record files in the following two ways: Playback by File List double-click the record file to play the video on the display window of playback, or select the record file from the search result list, and then click the icon on the toolbar to start play back with the first record file. Playback by Timeline The timeline indicates the time duration for the record file. Click on the timeline to play back the video of the specific time. You can click You can click or or to scale up or scale down the timeline bar. to go to the previous or the next time period. You can use the mouse wheel to zoom in or zoom out on the timeline. Event Playback Toolbar: Figure 3-11 On the Remote Playback page, the following toolbar buttons are available: Table 3-4 Buttons on the Event Playback Toolbar Button Name Stop Playback Pause/Start Playback Description Stop the playback of all channels. Pause/Start the playback of record files. Single Frame Play back the record files frame by frame. Previous Event Go to the playback of the previous event. Next Event Volume Full Screen Go to the playback of the next event. Click to turn on/off the audio and adjust the audio volume. Display the video playback in full screen mode. Press ESC to exit. You can move the slider on the Playback Speed Bar to set the playback speed. 42 User Manual of MAZi CMS V2.0 3.3.5 Synchronous Playback Purpose: In synchronous playback, the record files can be played back in synchronization. Record files from up to 16 cameras can be played back simultaneously. Synchronous Playback for Some Searched Cameras Steps: 1. Start the normal playback of the searched cameras. Figure 3-12 2. 3. Click in the toolbar, and then the record files in normal playback will be played in sync. The icon turns to . To disable the synchronous playback, click the icon . —— Synchronous Playback for All Searched Cameras Steps: 1. Search the record files for the normal playback. 2. Click 3. Select the record file from the list and click in the toolbar to enable the synchronous playback. The icon turns to . , or click on the timeline to start the synchronous playback for all searched cameras. 43 User Manual of MAZi CMS V2.0 4. To disable the synchronous playback, click the icon . —— Chapter 4 Event Management Purpose: In MAZi CMS client software, rules can be set up for triggers and linkage actions. You can assign linkage actions to the trigger by setting up a rule. For example, when motion is detected, an audible warning appears or other linkage actions happen. Click Tool->Event Management to open the Event Management page. The Event Management page is shown as follows: Figure 4-1 You can set different linkage actions for the following triggers: Motion Detection Tampering Alarm PIR Alarm Video Loss Alarm Input Device Exception 4.2 Configuring Motion Detection Alarm Purpose: A motion detection alarm is triggered when the client software detects motion within its defined area. The linkage actions, including alarm output, channel record and client action can be set. Steps: 44 User Manual of MAZi CMS V2.0 1. Open the Event Management page and click Camera Event tab. Figure 4-2 2. Select the camera to be configured and select Motion Detection as the event type. 3. Check the checkbox Enable to enable the function of motion detection. 4. Select the arming schedule template from the drop-down list. All-day Template: for all-day continuous arming. Weekday Template: for working-hours continuous arming from 8:00 AM to 8:00 PM. Template 01-09: fixed templates for special schedules. You can edit the templates if needed. Custom: can be customized as desired. If you need to edit or customize the template, see Configuring Record Schedule Template 5. Click-and-drag the mouse to draw a defined area for the arming region. You can click the icon to set the whole video area as detection area, or click the icon clear all the detection area. 6. to Drag the slider on the sensitivity bar to adjust the motion detection sensitivity. The larger the value is, the more sensitive the detection is. Check the checkboxes to activate the linkage actions. For details, see Table 4-1 Linkage Actions for Motion Detection Alarm 7. Optionally, click Copy to… to copy the event parameters to other channels. 8. Click Save to save the settings. —— Table 4-1 Linkage Actions for Motion Detection Alarm Linkage Actions Alarm Output Descriptions Enable the alarm output function. Select the alarm output port and the external device connected to the port can be controlled. Channel Record Start the recording of the selected cameras when alarm is triggered. Audible Warning The client software gives an audible warning when alarm is triggered. 45 User Manual of MAZi CMS V2.0 Email Linkage Send an Email notification of the alarm information to one or more receivers. Alarm on E-map Display the alarm information on the E-map. Alarm Triggered The image with alarm information pops up when alarm is triggered. Pop-up Image Alarm Triggered Display the video on the Video Wall when alarm is triggered. Video Wall Display Configuring Arming Schedule Template Perform the following steps to configure the arming schedule template: If Template 01-09 is selected in the drop-down list, start from step 1, as shown in Figure 4-3; If Custom is selected in the drop-down list, start from step 2, as shown in Figure 4-4. Figure 4-3 Figure 4-4 46 User Manual of MAZi CMS V2.0 Steps: 1. Click Edit to enter the Templates Management interface. Select the template to be set and you can edit the template name. 2. 3. Set the time schedule for the selected template. When the cursor turns to , you can edit the schedule time bar. When the cursor turns to , you can move the selected time bar you just edited. When the cursor turns to , you can lengthen or shorten the selected time bar. Optionally, you can select the schedule time bar, and then click the icon to delete the selected time bar, or click the icon to delete all the time bars, 4. or click the icon to copy the time bar settings to the other dates. Click OK to save the settings. You can click Save as Schedule Template on the Custom Schedule interface, and then the custom template can be saved as template 01--09. Up to 8 time periods can be set for each day in the arming schedule template (depending on the capacity of device). 4.3 Configuring Tampering Alarm Purpose: A tampering alarm is triggered when the camera is covered and the monitoring area cannot be viewed. The linkage actions, including alarm output and client action can be set. Steps: 1. Open the Event Management page and click the Camera Event tab. Figure 4-5 47 User Manual of MAZi CMS V2.0 2. Select the camera to be configured and select Tampering Alarm as the event type. 3. Check the checkbox Enable to enable the function of tampering alarm. 4. Select the arming schedule template from the drop-down list. If you need to edit or customize the template, see Configuring Record Schedule Template 5. Select the triggered camera. The image or video from the triggered camera will pop up or be displayed on the Video Wall when tampering alarm occurs. 6. Click-and-drag the mouse to draw a defined area for the arming region. 7. Drag the slider on the sensitivity bar to adjust the tampering alarm sensitivity. Check the checkboxes to activate the linkage actions. For details, see Table 4-2 Linkage Actions for Tampering Alarm 8. Optionally, click Copy to… to copy the event parameters to other cameras. 9. Click Save to save the settings. —— Table 4-2 Linkage Actions for Tampering Alarm Linkage Actions Alarm Output Audible Warning Email Linkage Descriptions Enable the alarm output function. Select the alarm output port and the external device connected to the port can be controlled. The client software gives an audible warning when alarm is triggered. Send an Email notification of the alarm information to one or more receivers. Alarm on E-map Display the alarm information on the E-map. Alarm Triggered The Image of the triggered camera pops up when alarm is triggered. Pop-up Image Alarm Triggered Video Wall Display Display the video of the triggered camera on the Video Wall when alarm is triggered. 4.4 Configuring PIR Alarm Purpose: A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's field of view. The heat energy dissipated by a person, or any other warm blooded creature such as dogs, cats, etc., can be detected. The PIR Alarm function requires the support of connected device. Steps: 1. Open the Event Management page and click the Camera Event tab. 48 User Manual of MAZi CMS V2.0 Figure 4-6 2. Select the camera to be configured and select PIR Alarm as the event type. 3. Check the checkbox Enable to enable the function of PIR alarm. 4. Input a descriptive name of the alarm. Check the checkboxes to activate the linkage actions. For details, see Table 4-3 Linkage Actions for PIR Alarm 5. Optionally, click Copy to… to copy the event parameters to other channels. 6. Click Save to save the settings. —— Table 4-3 Linkage Actions for PIR Alarm Linkage Actions Alarm Output Descriptions Enable the alarm output function. Select the alarm output port and the external device connected to the port can be controlled. Channel Record Start the recording of the selected cameras when alarm is triggered. Audible Warning The client software gives an audible warning when alarm is triggered. Email Linkage Send an Email notification of the alarm information to one or more receivers. Alarm on E-map Display the alarm information on the E-map. Alarm Triggered The Image with alarm information pops up when alarm is triggered. Pop-up Image Alarm Triggered Display the video on the Video Wall when alarm is triggered. Video Wall Display 49 User Manual of MAZi CMS V2.0 4.5 Configuring Video Loss Alarm Purpose: When the client software cannot receive video signal from the front-end devices, the video loss alarm will be triggered. The linkage actions, including alarm output and client action can be set. Steps: 1. Open the Event Management page and click Camera Event tab. Figure 4-7 2. Select the camera to be configured and select Video Loss as the event type. 3. Check the checkbox Enable to enable the function of video loss alarm. 4. Select the arming schedule template from the drop-down list. If you need to edit or customize the template, see Configuring Record Schedule Template 5. Select the triggered camera. The image or video from the triggered camera will pop up or be displayed on the Video Wall when video loss alarm occurs. Check the checkboxes to activate the linkage actions. For details, see Table 4-4 Linkage Actions for Video Loss Alarm 6. Optionally, click Copy to… to copy the event parameters to other cameras. 7. Click Save to save the new settings. —— Table 4-4 Linkage Actions for Video Loss Alarm Linkage Actions Alarm Output Audible Warning Email Linkage Descriptions Enable the alarm output function. Select the alarm output port and the external device connected to the port can be controlled. The client software gives an audible warning when alarm is triggered. Send an Email notification of the alarm information to one or more receivers. 50 User Manual of MAZi CMS V2.0 Alarm on E-map Display the alarm information on the E-map. Alarm Triggered The Image of the triggered camera pops up when alarm is triggered. Pop-up Image Alarm Triggered Video Wall Display Display the video of the triggered camera on the Video Wall when alarm is triggered. 4.6 Configuring Alarm Input Linkage Purpose: When a device's alarm input port receives a signal from an external alarm device, such as smoke detector, doorbell, etc., the alarm input linkage actions are triggered for notification. Before you start: Add the alarm inputs to the client, click Import on the Group Management interface, click the Alarm Input tab and import alarm inputs into groups for management. Steps: 1. Open the Event Management page and click the Alarm Input tab. Figure 4-8 2. Select the alarm input channel to be configured. 3. Check the checkbox Enable. 4. Input a descriptive name of the alarm. 5. Set the alarm status according to the alarm input device. 6. Select the arming schedule template from the drop-down list. If you need to edit or customize the template, see Configuring Record Schedule Template Check the checkboxes to activate the linkage actions. For details, see Table 4-5 Linkage Actions for Alarm Input 51 User Manual of MAZi CMS V2.0 7. Optionally, click Copy to… to copy the event parameters to other alarm inputs. 8. Click Save to save the settings. —— Table 4-5 Linkage Actions for Alarm Input Linkage Actions Alarm Output Descriptions Enable the alarm output function. Select the alarm output port and the external device connected to the port can be controlled. Channel Record Start the recording of the selected cameras when alarm is triggered. Audible Warning The client software gives an audible warning when alarm is triggered. Email Linkage Send an Email notification of the alarm information to one or more receivers. Alarm on E-map Display the alarm information on the E-map. Alarm Triggered The Image with alarm information pops up when alarm is triggered. Pop-up Image Alarm Triggered Display the video on the Video Wall when alarm is triggered. Video Wall Display 4.7 Configuring Device Exception Linkage Steps: 1. Open the Event Management page and click the Device Exception tab. Figure 4-9 2. Select the device to be configured. 3. Select the device exception type, including HDD full, HDD exception, illegal login, etc. 4. Check the checkbox Enable. Check the checkboxes to activate the linkage actions. For details, see Table 4-6 Linkage Actions for 52 User Manual of MAZi CMS V2.0 Device Exception 5. Optionally, click Copy to… to copy the event parameters to other devices. 6. Click Save to save the settings. —— Table 4-6 Linkage Actions for Device Exception Linkage Actions Descriptions Enable the alarm output function. Select the alarm output port and the Alarm Output external device connected to the port can be controlled. Audible Warning The client software gives an audible warning when alarm is triggered. Email Linkage Send an Email notification of the alarm information to one or more receivers. 4.8 Viewing Alarm and Event Information The information of recent alarms and events can be displayed. Click the icon in Alarms and Events Toolbar on the footer of the page to show the Alarms and Events panel. As shown in Figure 4-10 Figure 4-10 On the Alarms and Events panel, the following toolbar buttons are available: Table 4-7 Buttons on Alarms and Events Panel Button Name Description Clear Info Clear the information of alarms and events displayed on the list. Enable/Disable Alarm Click to enable/disable image pop-up when alarms occur. Triggered Pop-up Image Enable/Disable Audio Auto Hide/Lock Maximize Show/Hide Click to enable/disable the audio warning for the alarm. Click to hide automatically/lock the Alarms and Events panel. Maximize the Alarms and Events panel in a new tab page. Click to show/hide the Alarms and Events panel. Viewing Alarms Information Different alarm types can be displayed on the panel: Motion Detection, Video Exception, Alarm Input and Device Exception. You can check the checkbox to enable the displaying of that type alarm. Before you start: To display the alarms, the event parameters need to be configured. 53 User Manual of MAZi CMS V2.0 Steps: 1. Click the Alarm tab. 2. Check the checkboxes of different alarm types. 3. When an alarm occurs, the icon twinkles to call attention. The alarm information, including the time, source, details and content will be displayed. Click Click to get a live view of the alarm triggered camera. to send an Email notification of the alarm to one or more receivers. Click to display the video of alarm triggered camera on the Video Wall. Click under the Note column to input a prompt message for the alarm. 4. To clear the alarm information, click the icon Clear. , or right-click on an alarm log and then click —— Viewing Events Information Purpose: The abnormal events of the client software, such as the live view failure, device disconnection, can also be displayed. Steps: 1. Click the Event tab. The event information, including the time and detailed description will be displayed. 2. To clear the event information, click the icon Clear. , or right-click on the event log and then click —— 54 User Manual of MAZi CMS V2.0 Chapter 5 E-map Management Purpose: The E-map function gives a visual overview of the locations and distributions of the installed cameras and alarm input devices. You can get the live video of the cameras on the map, and you will get a notification message from the map when alarm is triggered. Click View->E-map to open the E-map page. The E-map page is shown as in Figure 5-1. Figure 5-1 E-map Page Table 5-1 Items of the E-map Page Number Name 1 Group List 2 Map Display Area 3 E-map Toolbar 5.2 Adding an E-map Purpose: An E-map needs to be added as the parent map for the hot spots and hot regions. Steps: 1. Open the E-map page. 2. Select a group for which you want to add a map. 3. 4. Click the icon in the Map Display Area to open the map adding dialog box. Input a descriptive name of the added map as desired. 5. 6. Click the icon and select a map file from the local path. Click OK to save the settings. —— 55 User Manual of MAZi CMS V2.0 The picture format of the map can only be *.png, *.jpg or *.bmp. Only one map can be added to a group. Figure 5-2 The map added is displayed in the Map Display Area. Use the mouse wheel to zoom in or zoom out on the map. You can click-and-drag the yellow window in the lower-right corner or use the direction buttons and zoom bar to adjust the map area for view. As shown in Figure 5-3. Figure 5-3 Click the button Edit Map or Map Preview in the E-map toolbar to enter the map editing mode or map preview mode. E-map Toolbar in Map Editing Mode: Figure 5-4 E-map Toolbar in Map Preview Mode: Figure 5-5 56 User Manual of MAZi CMS V2.0 The descriptions of all the buttons are shown as below: Table 5-2 Buttons on E-Map Toolbar Button Name Modify Map Description Modify the map information, including the map name and file path. Delete Map Delete the current map. Add Camera Add a camera as the hot spot on the map. Add Alarm Input Add an alarm input sensor as the hot spot on the map. Add Hot Region Add a map as the hot region on the current map. Modify Modify the information of the selected hot spot or hot region. Delete Delete the selected hot spot or hot region. Clear Alarm Info Back to Parent Map Clear the alarm information displayed on the map. Go back to the parent map. 5.3 The Hot Spot Function Purpose: The cameras and alarm inputs can be added on the map and are called the hot spots. The hot spots show the locations of the cameras and alarm inputs, and you can also get the live video and alarm information of the surveillance scenarios through the hot spots. 5.3.2 Adding Hot Spots Adding Cameras as Hot Spots Steps: 1. Click the Edit Map button in the E-map toolbar to enter the map editing mode. 2. Click the icon in the toolbar to open the Add Hot Spot dialog box. Figure 5-6 3. Check the checkboxes to select the cameras to be added. 57 User Manual of MAZi CMS V2.0 4. Optionally, you can edit hot spot name, select the name color and select the hot spot icon. 5. Click OK to save the settings. The camera icons are added on the map as hot spots and the icons of added cameras changes from to in the group list. You can click-and-drag the camera icons to move the hot spots to the desired locations. You can also click-and-drag the camera icons from the group list to the map directly to add the hot spots. —— Adding Alarm Inputs as Hot Spots Steps: 1. Click the Edit Map button in the E-map toolbar to enter the map editing mode. 2. Click the icon in the toolbar to open the Add Hot Spot dialog box. Figure 5-7 3. Check the checkboxes to select the alarm inputs to be added. 4. Optionally, you can edit hot spot name, select the name color and select the hot spot icon. 5. Click OK to save the settings. The alarm input icons are added to the map as hot spots and the icons of added alarm inputs changes from to in the group list. You can click-and-drag the alarm input icons to move the hot spots to the desired locations. You can also click-and-drag the alarm input icons from the alarm input list to the map directly to add the hot spot. —— 58 User Manual of MAZi CMS V2.0 5.3.3 Modifying Hot Spots Purpose: You can modify the information of the added hot spots on the map, including the name, the color, the icon, etc. Steps: 1. Click the Edit Map button in the E-map toolbar to enter the map editing mode. 2. Select the hot spot icon on the map and then click in the toolbar, or double-click the hot spot icon on the map to open the Modify Hot Spot dialog box. Figure 5-8 3. You can edit the hot spot name in the text field and select the color, the icon and the linked camera or alarm input. 4. Click OK to save the new settings. To delete the hot spot, select the hot spot icon and click in the toolbar. —— 5.3.4 Previewing Hot Spots Steps: 1. Click the Map Preview button in the E-map toolbar to enter the map preview mode. 2. Double-click the camera hot spots, and you can get the live video of the cameras. 59 User Manual of MAZi CMS V2.0 Figure 5-9 3. If there is any alarm triggered, an icon will appear and twinkle near the hot spot. Click the alarm icon, and then you can check the alarm information, including alarm type and triggering time. —— To display the alarm information on the map, the Alarm on E-map functionality needs to be set as the alarm linkage action. 5.4 The Hot Region Function Purpose: The hot region function links a map to another map. When you add a map to another map as a hot region, an icon of the link to the added map is shown on the parent map. The added map is called child map while the map to which you add the hot region is the parent map. A map can only be added as the hot region for one time. 5.4.5 Adding Hot Regions Before you start: Add another map to the group. Steps: 1. Click the Edit Map button in the E-map toolbar to enter the map editing mode. 2. Select an added map as the parent map. 3. Click the icon in the toolbar to open the Add Hot Region dialog box. 60 User Manual of MAZi CMS V2.0 Figure 5-10 4. Check the checkbox to select the child map to be linked. 5. Optionally, you can edit the hot region name, and select the hot region color and icon. 6. Click OK to save the settings. The child map icons are added on the parent map as the hot regions. You can click-and-drag the child map icons to move the hot regions to the desired locations. —— 5.4.6 Modifying Hot Regions Purpose: You can modify the information of the hot regions on the parent map, including the name, the color, the icon, etc. Steps: 1. Click the Edit Map button in the E-map toolbar to enter the map editing mode. Figure 5-11 2. Select the hot region icon on the parent map and then click in the toolbar, or double-click the hot region icon to open the Modify Hot Region dialog box. 3. You can edit the hot region name in the text field and select the color, the icon and the linked child map. 4. Click OK to save the new settings. 61 User Manual of MAZi CMS V2.0 —— To delete the hot region, select the hot region icon and click in the toolbar. 5.4.7 Previewing Hot Regions Steps: 1. Click the Map Preview button in the E-map toolbar to enter the map preview mode. Figure 5-12 2. Click the hot region icon to go to the linked child map. Figure 5-13 3. The hot spots can also be added on the hot regions. 4. You can click the icon You can also click the icon in the toolbar to go back to the parent map. in the toolbar to clear the alarm information. —— 62 User Manual of MAZi CMS V2.0 Chapter 6 Log Management Purpose: The log files are stored on the local PC or Devices and can be searched for checking. 2 types of log files are provided: client logs and server logs. The client logs refer to the log files of the client and are stored on the local PC; the server logs refer to the log files of the connected devices and are stored on the local device. Click the Tool->Log Search to open the log management page. Figure 6-1 Searching Log Files Steps: 1. Open the Log Search page。 Figure 6-2 63 User Manual of MAZi CMS V2.0 2. Select the log type. If Server Logs is selected, then click to specify the device for search. 3. 4. Click the icon to specify the start time and end time. Click Search. The log files between the start time and end time will be displayed on the list. You can check the operation time, description and other information of the logs. Up to 90000 items of logs can be displayed. Please narrow the time range or filter the log type for search if there are too many log files. —— Filtering Log Files Purpose: After searched out successfully, the log files can be filtered by the keyword or condition, and thus you can find the logs as you want. Steps: 1. Click Log Filter or the icon on the Log Search page to expand the Log Filter panel. Figure 6-3 2. Select Filter by Keyword, and then input keyword for filtering in the text field; or select Filter by Condition, and then specify log information in the drop-down list. 3. Optionally, you can click More… to filter the log files more accurately. 4. Click Filter to start filtering. You can click Clear Filter the clear the filtering. —— Backing up Log Files Purpose: The log files, including the client logs and server logs, can be exported for backup. Steps: 1. Click Backup Log to open the Backup Log dialog box. Figure 6-4 64 User Manual of MAZi CMS V2.0 2. 3. Click the icon and select a local saving path. Click Backup to export the selected log file for backup. You can click FileOpen Log File to check the information of the backup log files on local PC. —— Chapter 7 Account Management and System Configuration 7.1 Account Management Purpose: Multiple user accounts can be added to the client software, and you are allowed to assign different permissions for different users if needed. Click Tool->Account Management to open the Account Management page. The Account Management page is shown as in Figure 7-1. Figure 7-1 The user account you registered to log in the software is set as the super administrator. Adding the User Steps: 1. Open the Account Management page. 2. Click Add User to open the Add User dialog box. 3. Select the user type from the drop-down list. 2 types of user accounts are selectable: 65 User Manual of MAZi CMS V2.0 Administrator: The administrator account has all permissions by default, and can modify the passwords and permissions of all operators and its own account. Operator: The operator account has no permission by default and you can assign the permissions manually. An operator can only modify the password of its own account. 4. Input the user name, password and confirm password as desired. 5. Check the checkboxes to assign the permissions for the created user. 6. Optionally, you can click Default Permission to restore the default permissions of this user. 7. Click Save to save the settings. —— Figure 7-2 The user name cannot contain any of the following characters: / \ : * ? “ < > |. The administrator password cannot be shorter than 6 characters, and the operator password cannot be empty. Up to 50 user accounts can be added for the client software. Managing the User Purpose: After created successfully, the user account is added to the user list on the Account Management page. You can edit or delete the information of the user accounts. To edit the information of the user, select the user from the list, and click Edit User. To delete the information of the user, select the user from the list, and click Delete User. 7.2 System Configuration Purpose: The general parameters, file saving paths, keyboard and joystick shortcuts, alarm sounds and Email settings can be configured. 66 User Manual of MAZi CMS V2.0 Click Tool->System Configuration to open the System Configuration page. The System Configuration page is shown as in Figure 7-3. Figure 7-3 You can click Default Value to restore the defaults of all the system configurations. 7.2.1 General Settings Purpose: The frequently-used parameters, including the log expired time, view scale, etc., can be set. Steps: 1. Open the System Configuration page. Figure 7-4 67 User Manual of MAZi CMS V2.0 2. Click the General tab to enter the General Settings interface. Configure the general parameters. For details, see Table 7-1 General Parameters 3. Click Save to save the settings. —— Table 7-1 General Parameters Parameters Log Expired Time View Scale Network Performance Play Performance Enable Screen Toolbar Descriptions The time for keeping the log files, once exceeded, the files will be deleted. The view scale of the video in live view or playback. It can be set as Full Screen, 4:3, 16:9 or Original Resolution. The current network conditions. It can be set as Normal, Better or Best. The play performance of the live video. It can be set as Shortest Delay, Real Time, Balanced or Fluency. Show the toolbar on each display window in live view or playback. Display Enable Auto-login Prioritize the Playback of Record Files on Log in the client software automatically. Play back the video files recorded on the storage server preferentially. Otherwise, play back the video files recorded on the local device. Storage Server Resume Live View Resume the latest live view status after you log in the client again. Status Auto-change Stream Type Auto Time Adjustment Change the stream type automatically in live view according to the size of the display window. Adjust the time automatically at a specified time point. 7.2.2 File Saving Path Settings Purpose: The video files from manual recording, the captured pictures and the system configuration files are stored on the local PC. The saving paths of these files can be set. Steps: 1. Open the System Configuration page. 2. Click the File tab to enter the File Saving Path Settings interface. 3. 4. Click the icon and select a local path for the files. Click Save to save the settings. 68 User Manual of MAZi CMS V2.0 Figure 7-5 —— 7.2.3 Keyboard and Joystick Shortcuts Settings Purpose: DS-1003 keyboard can be connected to the client and be used to control the PTZ cameras. You can set the shortcuts of PC keyboard and USB joystick to get quick and convenient access to the commonly used actions. Steps: 1. Select the COM port from the drop-down list if 1003K keyboard is connected. 2. Select a certain function from the list. 3. Double-click the item field under the PC Keyboard or USB Joystick column. 4. Select the compound keys operation or USB joystick operation from the drop-down list. 5. Click Save to save the settings. 69 User Manual of MAZi CMS V2.0 Figure 7-6 —— 7.2.4 Alarm Sound Settings Purpose: When the alarm, such as motion detection alarm, video exception alarm, etc., is triggered, the client can be set to give an audible warning and the sound of the audible warning can be configured. Steps: 1. Open the System Configuration page. Figure 7-7 2. Click the Alarm Sound tab to enter the Alarm Sound Settings interface. 3. Click the icon 4. Optionally, you can click the icon and select the audio files from the local path for different alarms. for a testing of the audio file. 70 User Manual of MAZi CMS V2.0 5. Click Save to save the settings. The format of the audio file can only be *wav. —— 7.2.5 Email Settings Purpose: An Email notification can be sent when a system alarm occurs. To send the Email to some specified receivers, the settings of the Email need to be configured before proceeding. Steps: 1. Open the System Configuration page. 2. Click the Email tab to enter the Email Settings interface. 3. Input the required information. SMTP Server: Input the SMTP Server address. Port: Input the communication port of Email service. The port is 25 by default. User Name: Input the user name of the sender Email address. Password: Input the password of the sender Email address. Sender Address: Input the Email address of the sender. Receiver 1—3: Input the Email address of the receiver. Up to 3 receivers can be set. 4. Optionally, you can check the checkbox Enable SSL to increase the security of email sending. 5. Optionally, you can click Send Test Email to send an email to the receiver for test. 6. Click Save to save the settings. Figure 7-8 — 71 User Manual of MAZi CMS V2.0 Chapter 8 Forwarding Video Stream through Stream Media Server Purpose: There is always a limit of the device remote access number. When there are many users wanting to get remote access to the device to get the live view, you can add the stream media server and get the video data stream from the stream media server, thus to lower the load of the device. 8.1 Adding the Stream Media Server Before you start: The stream media server application software needs to be installed and it is packed in the MAZi CMS software package. When installing the MAZi CMS, check the checkbox Stream Media Server to enable the installation of stream media server. Steps: 1. Click the shortcut icon on the desktop to run the stream media server. You can also forward the video through the stream media server installed on other PC. 2. Open the Device Management page and click the Server tab. 3. Click Add New Device Type, select Stream Media Server and click OK. 4. Click Stream Media Server on the Organization list and then click Add Device. You can add the stream media server in the following two ways: Adding Stream Media Server Manually Perform the following steps to add the stream media server manually: 1) Select IP Address as the adding mode. 2) Input the nickname and IP address of the stream media server. The default port value is 554. The IP address of the stream media server installed in the PC is normally the IP address of the PC. 3) Click Add to add the stream media server to the client software. Figure 8-1 72 User Manual of MAZi CMS V2.0 Adding Stream Media Server by IP Segment Perform the following steps to add the stream media server by IP segment: 1) Select IP Segment as the adding mode. 2) Input the start IP and end IP. The default port value is 554. 3) Click Add to add the stream media server to the client software. Figure 8-2 For one client, up to 16 stream media servers can be added. —— 8.2 Adding Cameras to Stream Media Server to Forward Video Stream Purpose: To get the video stream of a camera via stream media server, you need to connect the camera to the stream media server. Steps: 1. Select the stream media server from the list on Devices for Management panel. 2. Click Configure to enter the Stream Media Server Settings interface. 3. Select the cameras of which the video stream is to be forwarded via the stream media server. 4. Click OK to save the new settings. 5. Go the Main View page and start the live view of the cameras again. You can check the channel number of the video stream forwarded through or sent from the stream media server. 73 User Manual of MAZi CMS V2.0 Figure 8-3 For one stream media server, up to 64 channels of video stream can be forwarded through it and up to 200 channels of video stream can be sent to clients from it. —— Chapter 9 Decoding and Displaying Video on Video Wall The Video Wall module is only available when the decoding device is added to the client. It provides the video decoding functionality, and the decoded video stream can be displayed on the Video Wall for an attention-grabbing performance. Click View->Video Wall to open the Video Wall page . Figure 9-1 74 User Manual of MAZi CMS V2.0 9.2 Adding the Decoding Device Purpose: To display the video on the Video Wall, the decoding device needs to be added to the client. Steps: 1. Open the Device Management page and click the Server tab. Figure 9-2 2. Click Add New Device Type, select Decoding Device and click OK. 3. Click Decoding Device on the list to enter Decoding Device Adding interface. You can add the decoding device in the following ways: By detecting the online devices, see Section Adding Online Devices. By specifying the device IP address, see SectionAdding Devices Manually. By specifying an IP segment, see Section Adding Devices by IP Segment. By IP Server, see Section Adding Devices by IP Server. —— 9.3 Configuring Video Wall Settings Purpose: After the decoding device is added successfully, the parameters of Video Wall need to configured for video display. Steps: 1. Open the Video Wall page. 2. Click Enter Video Wall Config to enter the Video Wall Configuration interface. 3. There is a 3*3 video wall on the screen by default. You can add a new video wall if needed. Perform the following steps to add a new video wall: 1) Click the icon in the toolbar to open the Add Video Wall dialog box. 75 User Manual of MAZi CMS V2.0 Figure 9-3 2) Input the nickname, the number of rows and columns of the video wall. 3) Click Add. 4. To modify the video wall, select the video wall, and click the icon in the toolbar. To delete the video wall, select the video wall, and click the icon in the toolbar. Click-and-drag the decoding channel on the left-side list to the display window of video wall, to connect them one-to-one correspondence. You can click display window to release the connection. in the upper-right corner of the Figure 9-4 Up to 4 video walls can be added to the client software. The total number of the display windows on the video wall should be no more than 100. The ranges of the row number and column number are both between 1 and 20. —— 76 User Manual of MAZi CMS V2.0 9.4 Displaying Video on Video Wall Purpose: After the settings of the video wall are configured, the video stream from the cameras can be decoded and displayed on the Video Wall. Steps: 1. Click Back to Operation Page to go back to the Video Wall Operation interface. 2. Select the screen layout mode for the display window. 3. Click-and-drag the camera from the left-side list to the display window on the video wall. The video stream from the camera will be decoded and displayed on the Video Wall. Click the icon and you can get a preview of the video in the lower-right corner of the screen. Figure 9-5 —— 77 User Manual of MAZi CMS V2.0 Troubleshooting Live View Problem: Failed to get the live video of a certain device. Possible Reasons: Unstable network or the network performance is not good enough. The device is offline. Too many accesses to the remote device cause the load of the device too high. The current user has no permission for live view. The version of the client software is below the needed version. Solutions: Check network status and disable other not in use process on your PC. Check the device network status. Restart the device or disable other remote access to the device. Log in with the admin user and try again. Download the client software of the latest version. Recording Problem: Local recording and remote recording are confused. Solutions: The local recording in this manual refers to the recording which stores the record files on the HDDs, SD/SDHC cards of the local device. The remote recording refers to the recording action commanded by the client on the remote device side. Playback Problem: Failed to download the record files or the downloading speed is too slow. Possible Reasons: Unstable network or the network performance is not good enough. The NIC type is not compatible. Too many accesses to the remote device The current user has no permission for playback. The version of the client software is below the needed version. Solutions: Check network status and disable other not in use process on your PC. Directly connect the PC running the client to device to check the compatibility of the NIC card. Restart the device or disable other remote access to the device. Log in with the admin user and try again. Download the client software of the latest version. 78
advertisement
Key Features
- Real-time live view
- Video recording
- Remote search and playback
- File backup
- Flexible distributed structure
- Easy-to-use operations
Questions & Answers
2024-10-12
W W V
How to change the language in MAZi CMS client software?
Open the Menu Bar, go to Help, select Language, choose the desired language, click OK, and reboot the software.
Frequently Answers and Questions
What is MAZi CMS?
MAZi CMS is a versatile video management software for DVRs, NVRs, IP cameras, encoders, decoders, etc. It provides multiple functionalities, including real-time live view, video recording, remote search and playback, file backup, etc., for the connected devices to meet the needs of monitoring task.
What are the system requirements for MAZi CMS?
The operating system must be Microsoft Windows 7/Windows 2008 (32/64-bit operating system), Windows 2003/Windows XP (32-bit operating system). The CPU should be Intel Pentium IV 3.0 GHz or above, memory must be 1G or above, and the display must be 1024*768 or above.
How do I add a device to MAZi CMS?
You can add the device by detecting the online devices, specifying the device IP address, specifying an IP segment, by IP Server, or by HiDDNS. For more details, refer to Section Adding the Encoding Device in the manual.