Harley Benton c 522094 Sugar & Spice Guitar Pedal User Guide

Sugar & Spice

Quick Start Guide

This quick start guide contains important information on the safe operation of the product. Read and follow the safety advice and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.

Safety instructions

Intended use

This device is intended for use as effect pedal for acoustic guitars. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke!

Where to use the product

Never use the product

• in conditions of extreme temperature or humidity

• in extremely dusty or dirty areas

• at locations where the unit can become wet

General handling

• To prevent damage, never use force when handling the product.

• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.

EN

Features

• Dual effect pedal for acoustic guitars

• The effect modules A and B can be used simultaneously or individually and in any order

• Delay and Chorus effects with five different modes (effect module A)

• Digital Reverb with different modes (effect module B)

• True Bypass when device is powered off

• Buffer Bypass when device is connected to power supply

• Foot switches with LED indicators

• Power supply via 9 V power adapter (not included, suitable optional power adapter: item no. 409939, no battery operation)

Operating elements

1 Reverb/Mod/Filter Switch for selecting the Reverb mode

Reverb : bright and clean plate reverb effect

Mod : modulated, shaking reverb effect

Filter : liquid-like modulated reverb effect

2 TONE/RATE/RANGE Rotary control for adjusting the tone ( Reverb) , the

3 9 V

4 LEVEL

5 RATE/TIME

6 DEPTH/FB

7 MODE Rotary control for selecting the Chorus / Delay mode

Chorus : classic Chorus effect

TRI-CH : triple Chorus effect

ECHO : Analog-like warm Chorus effect

8 INPUT

9 Chorus/Delay

CH-DL : Chorus and Delay effect with serial connection

DL-CH : Delay and Chorus effect with serial connection

10 Reverb

11 OUTPUT

12 DECAY modulation rate ( Mod ) or the filter range ( Filter )

Socket for connecting a power adapter (not included)

Rotary control for adjusting the volume level of the

Chorus / Delay effect

Rotary control for adjusting the modulation rate/time of the Chorus / Delay effect

Rotary control for adjusting the modulation depth/feedback of the Chorus / Delay effect

13

A – B

A or B

B – A

14 MIX

1/4" jack socket for connecting instruments

Foot switch for controlling the Chorus / Delay effect

Foot switch for controlling the Reverb effect

1/4" jack socket for connecting an amplifier

Rotary control for adjusting the Decay time of the Reverb effect

Switch for selecting the operation mode

The Chorus / Delay and Reverb effects can simultaneously be enabled. The signal will go through the Reverb effect and then to the Chorus / Delay effect.

Either the Chorus / Delay effect or the Reverb effect can be enabled.

The Reverb and Chorus / Delay effects can simultaneously be enabled. The signal will go through the Chorus / Delay effect and then to the Reverb effect.

Rotary control for adjusting the dry/wet signal mixing rate of the Reverb effects

/

.

-

,

+

Reverb

ö # $ % &

Reverb Mod Filter

RATE/TIME

'

MIX

DECAY

TONE

RATE

RANGE

A – B

A or B

B – A

LEVEL

TR

I-C

H

ECHO

DEPTH/FB

CH

-D

L

OR

CH

MODE

(

)

B

SUGAR & SPICE

BY A

Chorus/Delay

*

Technical specifications

• Input connections

• Output connections

• Power supply

• Power adapter

1/4" jack socket

Socket for connecting a power adapter

1/4" jack socket

External power adapter, 100 - 240 V ~ 50/60 Hz

Current draw 200 mA

Operating voltage 9 V

Polarity centre negative

• Dimensions (W × H × D)

• Weight

• Ambient conditions

95 mm × 37 mm × 120 mm

322 g

Temperature range 0 °C...40 °C

Relative humidity 20 %...80 %

(non-condensing)

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equipment Directive

(WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected]

DocID: 522094_09.02.2022