IPORT 72300 Connect Pro 10.2-inch iPad Instruction manual
The iPort 72300 is a protective case for the iPad that enables charging when docked with compatible iPort BaseStations or WallStations. It features a secure locking mechanism for added protection and a removable case top for easy access to the iPad. The case also has a built-in hand strap for comfortable handling and can be used for a variety of applications such as point-of-sale systems, interactive kiosks, or educational settings.
Advertisement
Advertisement
CASE
CONNECT
PRO
72300 - 10.2 Black
72301 - 10.2 White
72310 - Mini Black
72311 - Mini White
1
CONNECT
PRO
CASE
IPORT CONNECT Pro Case Install Manual
Thank you for purchasing the all new IPORT
CONNECT Platform. We hope you enjoy this revolutionary new system and if at any time you need more assistance please Contact IPORT Tech Support via Online chart or through our help desk.
- IPORT Team
Whats in box:
1 - IPORT CONNECT Case
1 - IPORT Security tool - 1.5mm hex key
1 - Info Card
Product Info Page - www.iportproducts.com/cpcase
Glossary of Terms:
• Case - The fully assembled CONNECT PRO CASE.
• Case Top - The Short removable portion of the chase
including the locking portion of the Case.
• IPORT Security Tool - The orange handled 1.5mm hex
tool used for locking and unlocking IPORT
Products.
• Station Interface Module - The main electronics
portion of the new IPORT Connect Platform electronic
components.
• Dock Interface Module - The secondary linear
electronics found on the IPORT CONNECT
Case.
2
CONNECT
PRO
CASE
1. Remove case from the box and place
on a table.
2. Remove the short Case Top.
3
CONNECT
PRO
CASE
3. Slide iPad into the case making sure
the lighting cable is snugly inserted
into the iPad.
4
CONNECT
PRO
CASE
4. Reinstall the case top onto the
lower half if the case and iPad.
5
CONNECT
PRO
CASE
5. Use the provided IPORT tool, insert
the tool into the top of the case and
slide the tool towards the lock
position icon.
6
CONNECT
PRO
CASE
• For added security rotate the IPORT
tool clockwise to tighten the
setscrew in place holding the lock
secure
7
CONNECT
PRO
CASE
6. Place the IPORT Connect Pro Case
onto a BaseStation or WallStation for
charing
8
CONNECT
PRO
CASE
Hand Strap Install - (Sold Separate)
1. Insert the metal strap loops with the
flat end pointing towards the left or
right side of the case.
9
CONNECT
PRO
CASE
2. Rotate the strap clip towards the
bottom of the case and insert into
the hole until the strap clip snaps
into place.
10
CONNECT
PRO
CASE
3. Repeat for the second clip.
X 2
4. Insert the IPORT Connect Hand Strap
under both strap loops with the
Velcro facing out from the case, fold
over the Hand Strap and attach to
the Velcro. Adjust hand strap to a
snug but comfortable fit around the
top of your hand.
• NOTE Case Top and Bottom MUST be
locked together to properly secure the iPad
and Connect Pro Case together.
11
CONNECT
PRO
CASE
Hand Strap Removal
1. Unlock the Connect Pro Case Top from
the Case Bottom. See step 5 of
installing the Case.
2. Remove the Case Top from the Case
Bottom.
12
CONNECT
PRO
CASE
3. On the inside of the Case Top, locate
the small oval hole and inserter the
IPORT Connect Security tool. Pivot
the IPORT Security tool toward
the top of the Case top freeing the
Strap loop. Rotate the Strap loop
90 degrees left or right to remove
the Strap Loop from the Case Top.
4. Repeat for the second strap loop.
13

Public link updated
The public link to your chat has been updated.
Advertisement