Silent blue LED CPU cooler equipped with 3 heat pipes that
perform as 6 heat pipes.
Celeron, Pentium 4, Celeron D, Pentium D, Core 2 Duo,
Sempron, Athlon 64, Athlon 64 X2, Athlon 64 FX, Opteron,
Dual-Core Opteron
Zalman CNPS9500 AM2 CPU Cooler
Zalman CNPS9500 LED
Zalman CNPS9500 Led Recensito
Zalman CNPS9500 LED
Celeron D
Silent Mode
Low-noise Mode
Supports all speeds
Supports all speeds
Supports all speeds
Supports all speeds
Supports all speeds
Supports all speeds
Supports all speeds
Supports all speeds
Supports all speeds
Supports all speeds
Pentium 4
Celeron D
Pentium 4
Pentium D
Core 2 Duo
Athlon 64
Athlon 64
Athlon 64 X2
Athlon 64 FX
Dual-Core Opteron
Athlon 64 FX
Dual-Core Opteron
85(L) x 112(W) x 125(H) mm
Base Material
Pure Copper
Dissipation Area
Thermal Resistance
Silent Mode
Bearing Type
2 Ball-Bearing
Noise Level
Low-noise Mode
Silent Mode
1,350rpm ¡¾ 10 %
Low-noise Mode
2,600rpm ¡¾ 10 %
Silent Mode
18.0dBA ¡¾ 10%
Low-noise Mode
27.5dBA ¡¾ 10%
Dimensions : 70(L) x 26(W) x 26(H) mm
Weight : 20g
Allowable Power : 6W or lower
Connector : 3-Pin
Output Voltage : 5V ~ 11V ¡¾ 2%
100% copper heatsink with aerodynamically optimized ¡°tunnel¡± design for maximum cooling efficiency.
Innovative and patented, curved heatpipe design for a heat transfer capacity of up to 6 heatpipes with the use of just 3.
Optimized heatsink layout for maximum cooling efficiency with minimal materials.
0.2mm ultra-slim fins for minimized weight and reduced airflow resistance.
Ultra quiet CNPS 92mm opaque fan with blue LEDs.
Aerodynamically optimized heatsink for smoother airflow and minimal noise.
Compatible CPUs
- Intel : All Dual Core Pentium CPUs (Socket 775), All Pentium 4 CPUs (Socket 775/478)
- AMD : All Dual Core AMD Athlon 64 x2 CPUs (Socket 939), All AMD Sempron/AMD64 CPUs (Socket 754/939/940)
Adjustable fan speed controller (FAN MATE 2) enables control of noise and fan speed.
Common Components
Components for Intel Pentium 4 (Socket 478)
- CNPS9500 LED
- Two(2) Clip Supports for Socket 478
- Thermal Grease
- Two(2) Install Bolts for Socket 478
- Fan Speed Controller (FAN MATE 2)
- One(1) L-Wrench
- Cable for FAN MATE 2
- Double-sided Tape (to attach FAN MATE 2)
- One(1) S-Type Clip (for installing Socket 775/478)
- One(1) L-Type Clip
(for installing Socket 754/939/940)
- Four(4) Bolts (for installing the Cooler)
- User¡¯s Manual
Components for Intel Dual Core Pentium
/ Pentium 4 (Socket 775)
Components for AMD Sempron/AMD64
(Socket 754/939/940)
- Four(4) Clip Support Fixing Bolts for Socket 775
- Two(2) Nipples (Motherboards with Pushpin-type
- One(1) Clip Support for Socket 775
- One(1) Backplate for Socket 775
Retention Frame need)
Zalman affixes a Computer Noise Prevention System (CNPS) mark to all components used for noiseless computers.
Korean Patent Application No. 05-45737
Korean Design Applications No. 05-15303, 15304, 15306, 15307, 17970, 17971
Patent applications pending in over 20 nations around the world including USA, EU, and Japan.
The maximum weight for a cooler is specified as 450g for Intel Socket 775 and AMD Socket 754/939/940. Special care should be
taken when moving a computer equipped with a cooler that exceeds the specified weight limit. Zalman is not responsible for any
damage that occurs when moving a computer.
Fan rotates at 2,600rpm when directly connected to 3-pin header on motherboard, without using a FAN MATE 2.
Zalman Tech is not responsible for any damages arising from using the product outside of its intended purpose.
CPU and/or motherboard may become damaged if the product is incorrectly installed. Familiarize yourself with the ¡°Installation¡±
steps before installing the product.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF