User`s manual HS-WL1008 Bluetooth stereo

User`s manual HS-WL1008 Bluetooth stereo
 User’s manual
HS-WL1008
Bluetooth stereo Headset
SPECIFICATIONS
Model no
Bluetooth Profiles
Music Time
Standby Time
Charge Time
HS-WL1008
HSP,HFP,A2DP,AVRCP
10 Hours
Up to 250 Hours
3 Hour
Ver.
Effective Range
Talk Time
Iuput
Bluetooth V2.1+EDR
10Meters
11Hours
DC : 5V/180mAh
Dimensions
14.5*10*6CM
1 About HS-WL1008
HS-WL1008 is a stereo headset with Bluetooth technology. It supports the following
Bluetooth profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
Overview
1
3
5
6
8
2
Retractable string
< key :last song
4
> key :next song
LED Indicator
Multifunction button (MFB): answer, end and reject call, pause and play
7
+ key: volume up
– key: volume down
9
Charging port
Built-in microphone
Charging the battery with USB cable
•
Step1: Insert USB charging cable into USB port of PC.
•
Step2: Connect charging cable with the charging port of headset.
•
When the red light is on, the headset is charging.
•
When the blue light is on, the headset is charged fully.
•
It takes about 3 hours to charge the headset fully.
Warning:
•
The battery is rechargeable.
2 •
First time charging : Before you use this Bluetooth headset, please charge the battery
of headset fully
How to use
A Switching on / off headset
Function
Operation
LED indicator
Indication tone
Switch on
Press and hold the
MFB for 3 seconds
Blue LED is on for 1
second
“Do Do Do” tone
Switch off
Press and hold the
MFB for 6 seconds
Red LED is on for 1
second
“Do Do DO” tone
B Pairing the headset with Bluetooth devices
A) How to enter pairing mode
Be sure HS-WL1008 in power off status first. Press and hold the MFB for 6 seconds, till
Red and blue Led blink alternately, or you hear the indication “Do Do” twice come out. And
then release the MFB. The unit will become pairing mode.
B) Pairing the headset with Bluetooth mobile phone
Please make sure your mobile phone has Bluetooth function that can be used.
Specific pairing procedures were not the same with different mobile phone. Please refer to
your mobile phone manual for further information. Steps as follows:
a) Please keep the headset and mobile phone in the range of 1 meter when pairing.
b) Start the Bluetooth function of mobile phone and search the Bluetooth devices.
c) Make the headset enter into pairing mode (Please refer to “how to enter into pairing
mode”).
After searched, select “HS-WL1008”in the Bluetooth device list.
a) According to indication, enter password or PIN No:”0000”, and press the key of” Yes”
or “confirmed”.
b) After successful pairing, select “HS-WL1008” in the Bluetooth device list, and press
“connect”.
3 c) After successful connecting, the blue LED of the headset quickly blinks twice or three
times every 4 seconds.
Wearing the headset
The string of this headset is retractable, please adjust according to the actual use. Logo “L” of
headset represents left ear, Logo “R” of headset represents right ear. Please wear the headset
according to the indication of the Logo.
Making calls with the headset
Function
Status of headset
Operation
Voice dial
Standby mode
Press and hold MFB for 2s, release it till hearing
indication sound
Redial last
number
Standby mode
Short press MFB twice quickly
Volume up
Conversation
mode
Short press or long press + key. When the volume is
adjusted to max, you will hear an indication tone.
Volume
down
Conversation
mode
Short press or long press – key. When the volume is
adjusted to min, you will hear an indication tone.
Answer
calling
Ringing
Short press MFB
Reject calling Ringing
Press and hold MFB for 1s, and release it till hearing
indication sound
Warning: Excessive pressure from headphones can cause hearing loss.
Notes:
4 •
For some mobile phones, when you press the key of accepting on the phone, the
conversation will be sent to the mobile phone. At this time, you can switch the call to
headset by using the conversation switch button or through operating on the mobile
phone. Please refer to the instruction of your mobile phone for further information
Playing music
When the headset connects with the mobile phone or Bluetooth transmitter which supports
A2DP, you can enjoy music through headset wirelessly.
Function
Status of headset
Operation
Pause
Playing music
Short press MFB
Play
Pausing
Short press MFB
Last song
Playing music
Short press < key
Next song
Playing music
Short press> key
Volume up
Playing music
Short or long press + key. When the volume is
adjusted to max, you will hear an indication tone.
Volume down
Playing music
Short or long press – key. When the volume is
adjusted to min, you will hear an indication tone.
Notes: .
•
Remote control the function of last song/next song/pause, it needs your mobile phone
or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your
mobile phone or Bluetooth transmitter. for further information.
LED indicator
A) Charging
LED indicator
Status of the headset
Red LED is on
Charging
Blue LED is on
Finish charging
5 B) In use.
LED Indicator
Status of the headset
Red and blue LEDs blink alternately
Pairing mode
Blue LED quickly blinks once every 2 seconds.
Not connected to a device
Blue LED gradually turns on and off
Conversation mode
Red LED blinks twice every 20 seconds
Low power
G Re-connecting to a Bluetooth device
A)
Automatic connecting
Every time the headset is switched on, it will connect to the nearest, and the last
connected device automatically.
B)
Manual connecting to last connected device
When the headset is in standby mode and doesn’t connect to any devices, short press
MFB button once, it will connect to last connected device automatically.
6 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement