BIOS Setup
Industrial Touch Panel PC
SP-2L Series
User Manual
Content
•
•
•
•
•
•
•
•
•
•
•
Package Contents .…………………………………………………………………….....………………….
Safety Instructions ……………………………………………………………………………..…………….
FCC & CE Statement ………………………………………………………………..……………………..
Introduction ……………………………………………………………………………………………………
Features …………………………………………………………………………………………………...….
Motherboard Specification ……………………………………...…………………………………………..
System Specification …………...……………………………………………………………………………
Mounting Installation …………………………………………………………………………………………
Bios setup ………………………………………………………………………………...……………….….
Driver Installation …………………………………………………………………..…………………….….
Contact Information ……………………………………………………………………..……………….….
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
1
02
03
04
05
06
07
08
11
13
27
28
SP-2L Series
Package Contents
Please make sure that the items shown below are included in the package. Should an item be missing, please contact
the local retailer from which you purchased this product.
• 1 x Industrial Touch Panel PC
• 1 x DC in Power adapter
• 1 x Power cord
• 1 x CD
• 4 x screws (M3 x 4) for 2.5” HDD or SSD (If customers order 2.5” HDD or SSD from our side, we don’t offer 4 screws)
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
2
SP-2L Series
Safety Instructions
1.
Read Instructions: All the safety and operating
instructions should be read before the equipment is
operated.
2.
Retain Instructions: The safety and operating
instructions should be retained for future reference.
3.
Cleaning: Unplug this equipment from the outlet
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
4.
Water and Moisture: Do not use this equipment
near water.
5.
Ventilation: The openings on the enclosure are
provided for ventilation to ensure reliable operation
of the equipment and to protect it from overheating.
These openings should never be blocked.
6.
9.
10. Damage Requiring Service: Unplug this equipment
from the outlet and refer servicing to qualified
service personnel under the following conditions: a)
if the power cord or plug is damaged; b) if liquid has
penetrated into the equipment; c) if the equipment
has been exposed to moisture; d) if the equipment
does not work well, or you cannot get it to work
according to the user’s manual; e) if the equipment
has been dropped and damaged; f) if the equipment
has obvious signs of breakage.
11. Do not leave this equipment in an environment
where the storage temperature is below -10°C or
above 70°C. It may damage the equipment.
Power Sources: This equipment should be operated
only from the type of power source indicated on the
rating label. If you are not sure of the type of power
supply, consult your dealer or local power company.
7.
Heed Warnings: All warnings on the equipment and
in the operating instructions should be adhered to.
8.
Object and Liquid Entry: Never push objects of any
kind into this equipment through openings as they
may touch dangerous voltage points or shout-out
parts that could result in a fire or electric shock.
Never spill liquid of any kind on the equipment.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
Servicing: Do not attempt to service this equipment
yourself as opening or removing covers may
expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
12. Do not open the sealed enclosure / case of
equipment. Once enclosure is disassembled without
approval, it will lead in abnormal operating of water
proof gel. For Guarantee of water proof function,
please make sure configuration / peripheral has
been confirmed to install before shipping.
3
SP-2L Series
Regulatory Compliance Statements
FCC
This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received including interference that may cause undesired operation.
CE
The product(s) described in this manual complies with all applicable European Union (CE) directives if it has a CE
marking. For computer systems to remain CE compliant, only CE-compliant parts may be used. Maintaining CE
compliance also requires proper cable and cabling techniques.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
4
SP-2L Series
Introduction
SP-2L series is a fanless industrial touch panel PC and is an ideal solution for low noise and rough
environment. With its rugged and flexible extension design, it allows you to apply in different kinds of
Industrial condition.
It consists of CPU Board, LCD Display, highly integrated user-friendly touch screen, compact
designed chassis, high quality aluminum front bezel with anodic treatment and multiple I/O support for
versatile application.
It is equipped with industrial grade memory, HDD, CF Card, DOM (Disk on Module) and related
peripherals. With versatile design and flexible upgrade capability, our system is cost-effective and also
a reliable choice for our customers from Industrial Automation, Home Automation, Wireless
Automation to Game-in.
For mechanical installation requirements, we provide panel m ounting, VESA mounting and ARM
solution depending on our customer's need.
We support Windows XP Professional, Windows XP Em bedded, Windows 7, Windows CE and Linux
for our customer's operating software requirements.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
5
SP-2L Series
Features
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
Intel Dual Core Atom D2550 1.86Ghz
Fanless and compact design
CPU on board
Low power consumption
IP65 compliant 6 mm thickness aluminum front bezel
2 x GLAN
up to 5 x RS232
up to 4 x USB
1 x Audio (1 x Line out, 1 x MIC in)
800 x 600 dpi (10” and 12”)
1024 x 768 dpi (10”, 12” and 15”)
1280 x 1024 dpi (17” and 19”)
1366 x 768 dpi (15” wide screen)
1440 x 900 (19” wide screen)
1920 x 1080 (21” wide screen)
High quality black or silver aluminum front bezel with anodic treatment
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
6
SP-2L Series
Motherboard Specification
Model Name
KD951- D2550
CPU
Intel® Atom™ D2550, 1.86GHz, 1M cache
Chipset
Intel® NM10
BIOS
AMI 16 Mbit SPI BIOS
Memory
1 x 204-pin SODIMM socket supports DDR3 1066MHz up to 4GB
Display
Controller: Intel® GMA 3650
Interface: 1 x VGA, 1 x 24-bit LVDS
Ethernet
2 x Intel 82574 10/100/1000 Mbps
Audio
Realtek® ALC886 2-channel High Definition Audio
Storage
1 x SATA 2.0, 1 x CF
Expansion
1 x Mini PCIe
Internal I/O
Rear Panel I/O Port
- 4 x USB 2.0/1.1
- 1 x LVDS
- 1 x Audio
- 4 x RS-232
- 1 x LCD inverter
- 1 x SATA
- 1 x RS-232/422/485
- 1 x 8-bit digital I/O connector
- 1 x RS232
- 1 x VGA
- 2 x USB 2.0/1.1
- 1 x 12V DC-in
- 2 x RJ45 LAN
Power
DC 12V input
Watchdog Timer
Output System reset, Programmable 1 ~ 255 sec/min
Environment
Operating temperature: 0°C ~ 60°C
Storage temperature: -20°C ~ 85°C
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
7
SP-2L Series
System Specification
Model Name
Displa
y
SP-2LR10T
SP-2LS10T
SP-2LR12T
CPU
Intel Dual Core Atom D2550 1.86Ghz
Chipset
Intel NM10
Memory
1 x DDR III SODIMM up to 4 GB
Power Supply
DC in 12V external power adapter
I/O Ports
3 x COM (12.1”) & 2 x COM (10.4”), 2 x GLAN, 1 x VGA, 2 x USB 2.0,
1 x SATA socket, 1 x Audio optional
Expansion
1 x CF card socket, 1 x Mini PCIe slot
SP-2LS12T
Size/Type
10.4” TFT (4:3)
10.4” TFT (4:3)
12.1” TFT (4:3)
12.1” TFT (4:3)
Resolution
800 x 600
1024 x 768
800 x 600
1024 x 768
Colors
16.8 M
16.2 M
16.2 M
16.2 M
Luminance (cd/m2)
230
350
400
500
Contrast Ratio
500:1
1200:1
600:1
700:1
Viewing Angle (H/V°)
140/120
176/176
160/120
160/160
MTBF
50,000 hrs
50,000 hrs
50,000 hrs
50,000 hrs
Touch Screen
5-wire resistive
5-wire resistive
5-wire resistive
5-wire resistive
Installation
Panel mount and VESA mounting 75 x 75 mm
Dimension (W x H x D)
302 x 224 x 70 mm
302 x 224 x 70 mm
349.4 x 263.9 x 70 mm
349.4 x 263.9 x 70 mm
Weight
5 kg
5 kg
7 kg
7 kg
Operation Temperature
0°C ~ 45°C
Storage Temperature
-10°C ~ 70°C
Relative Humidity
0% - 95% non-condensing
OS
Windows 7 Pro, Embedded 7
Optional Items
Waterproof gasket, None touch screen, Capacitive touch screen, Open frame, Stainless front bezel
Memory, Storage devices, OS
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
8
SP-2L Series
System Specification
Model Name
SP-2LR15T
SP-2LR17T
CPU
Intel Dual Core Atom D2550 1.86Ghz
Chipset
Intel NM10
Memory
1 x DDR III SODIMM up to 4 GB
Power Supply
DC in 12V external power adapter
I/O Ports
5 x COM, 2 x GLAN, 1 x VGA, 2 x USB 2.0,
1 x SATA socket, 1 x Audio optional
Expansion
1 x CF card socket, 1 x Mini PCIe slot
SP-2LR19T
Size/Type
15” TFT (4:3)
17” TFT (4:3)
19” TFT (4:3)
Resolution
1024 x 768
1280 x 1024
1280 x 1024
Colors
16.2 M
16.7 M
16.7 M
Luminance (cd/m2)
350
300
250
Contrast Ratio
700:1
800:1
1000:1
Viewing Angle (H/V°)
140/125
140/125
140/125
MTBF
50,000 hrs
50,000 hrs
50,000 hrs
Touch Screen
5-wire resistive
5-wire resistive
5-wire resistive
Display
Installation
Panel mount and VESA mounting 100 x 100 mm
Dimension (W x H x D)
400.9 x 303.7 x 70 mm
453.5 x 352 x 70 mm
487 x 376.8 x 70 mm
Weight
10 kg
11 kg
12 kg
Operation Temperature
0°C ~ 45°C
Storage Temperature
-10°C ~ 70°C
Relative Humidity
0% - 95% non-condensing
OS
Windows 7 Pro, Windows XP
Optional Items
Waterproof gasket, None touch screen, Capacitive touch screen
Open frame, Stainless front bezel, Memory, Storage devices, OS
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
9
SP-2L Series
System Specification
Model Name
SP-2LD15T
SP-2LW19T
CPU
Intel Dual Core Atom D2550 1.86Ghz
Chipset
Intel NM10
Memory
1 x DDR III SODIMM up to 4 GB
Power Supply
DC in 12V external power adapter
I/O Ports
5 x COM, 2 x GLAN, 1 x VGA, 2 x USB 2.0,
1 x SATA socket, 1 x Audio optional
Expansion
1 x CF card socket, 1 x Mini PCIe slot
SP-2LW21T
Size/Type
15.6” TFT (16:9)
19” TFT (16:9)
21.5” TFT (16:9)
Resolution
1366 x 768
1440 x 900
1920 x 1080
Colors
16.2 M
16.7 M
16.7 M
Luminance (cd/m2)
300
300
300
Contrast Ratio
500:1
800:1
1000:1
Viewing Angle (H/V°)
170/160
160/160
170/160
MTBF
50,000 hrs
50,000 hrs
50,000 hrs
Touch Screen
5-wire resistive
5-wire resistive
5-wire resistive
Display
Installation
Panel mount and VESA mounting 100 x 100 mm
Dimension (W x H x D)
400.9 x 303.7 x 70 mm
453.5 x 352 x 70 mm
487 x 376.8 x 70 mm
Weight
10 kg
11 kg
12 kg
Operation Temperature
0°C ~ 45°C
Storage Temperature
-10°C ~ 70°C
Relative Humidity
0% - 95% non-condensing
OS
Windows 7 Pro, Embedded 7
Optional Items
Waterproof gasket, None touch screen, Capacitive touch screen
Open frame, Stainless front bezel, Memory, Storage devices, OS
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
10
SP-2L Series
Screw Mounting Installation
Front Side of the Mounting Wall
Back Side of the Mounting Wall
Mount Wall (Back Side)
Mount Wall (Front Side)
Cut Out
Panel Mount PC
(Back Side)
Panel Mount PC
(Front Side)
Screw Holes for Screw
Mounting Installation
Align the bottom of panel housing with the bottom edge of the cut out
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
11
SP-2L Series
VESA Mounting Installation
Panel PC
(Back Side)
Mount Wall or Object
Screws
Screw Holes for VESA
Mounting Installation
VESA Mounting Bracket
VESA Mounting Bracket
······ Sep 1: screw the VESA mounting plate to the Panel PC
······ Step2: screw the VESA mounting bracket to the front of a wall or the front / back of an object dependingly
······ Step3: slide the VESA mounting plate onto the VESA mounting bracket
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
12
SP-2L Series
BIOS Setup
Main
Advanced
The Main menu is the first screen that you will see when
you enter the BIOS Setup Utility.
The Advanced menu allows you to configure your system
for basic operation. Some entries are defaults required
by the system board, while others, if enabled, will
improve the performance of your system or let you set
some features according to your preference.
Important: Setting incorrect field values may cause
the system to malfunction.
System Date
The date format is <day>, <month>, <date>, <year>. Day
displays a day, from Sunday to Saturday. Month displays
the month, from January to December. Date displays the
date, from 1 to 31. Year displays the year, from 1980 to
2099.
System Time
The time format is <hour>, <minute>, <second>. The
time is based on the 24-hour military-time clock. For
example, 1 p.m. is 13:00:00. Hour displays hours from 00
to 23. Minute displays minutes from 00 to 59. Second
displays seconds from 00 to 59.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
Launch P XE OpROM
Enables or disables the boot option for legacy network
devices.
Launch Storage OpROM
Enables or disables the boot option for legacy mass
storage devices with option ROM.
13
SP-2L Series
BIOS Setup
PCI Subsystem Settings
ACPI Power Management Configuration
This section is used to configure the PCI subsystem
settings.
This section is used to configure the ACPI Power
Management.
ACPI Sleep State
Selects the highest ACPI sleep state the system will
enter when the Suspend button is pressed.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
Resume by PME
Enable this field to use the PME signal to wake up the
system.
Wake system with fixed time
Enable or disable system wake on alarm event. When
enabled, system will wake on the hr::min::sec specified.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
14
SP-2L Series
BIOS Setup
Trusted Computing (optional)
CPU Configuration
This section configures settings relevant to Trusted
Computing innovations.
This section is used to configure the CPU. It will also
display the detected CPU information.
TPM Support
Enables or Disables TPM. O.S. will not show TPM.
Resetting the platform is required.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
Limit CPUID Maximum
The CPUID instruction of some newer CPUs will return a
value greater than 3. The default is Disabled because
this problem does not exist in the Windows series
operating systems. If you are using an operating system
other than Windows, this problem may occur. To avoid
this problem, enable this field to limit the return value to 3
or less than 3.
15
SP-2L Series
BIOS Setup
IDE Configuration
USB Configuration
This section is used to configure IDE functions.
This section is used to configure USB.
Legacy USB Support
Enabled
Enables legacy USB.
Auto
Disables support for legacy when no USB devices are
connected.
Disabled
Keeps USB devices available only for EFI applications.
EHCI Hand-off
This is a workaround for OSes that does not support
EHCI hand-off. The EHCI ownership change should be
claimed by the EHCI driver.
Device reset time-out
Selects the USB mass storage device start unit
command timeout.
OnChip SA TA Type
This field is used to configure the SATA devices
supported by the AMD T56N/T40N.
Native IDE This option configures the Serial ATA drives
as Parallel ATA storage devices.
RAID This option allows you to create RAID on Serial
ATA devices.
AHCI This option allows the Serial A TA devices to use
AHCI (A dvanced Host Controller Interface).
Legacy IDE This option configures the Serial A TA drives
as Legacy IDE storage devices.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
16
SP-2L Series
BIOS Setup
Super IO Configuration
AC Power Loss
Turns Off
When power returns after an AC power failure, the
system’s power is off. You must press the Power button
to power-on the system.
This section is used to configure the serial port functions.
Turns On
When power returns after an AC power failure, the
system will automatically power-on.
Former-Sts
When power returns after an AC power failure, the
system will return to the state where you left off before
power failure occurs. If the system’s power is off when
AC power failure occurs, it will remain off when power
returns. If the system’s power is on when AC power
failure occurs, the system will power-on when power
returns
Case Open Beep
Set this field to Enabled to allow the system to alert you
of a chassis intrusion event.
Watchdog
This field is used to enable or disable the Watchdog
Timer function.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
17
SP-2L Series
BIOS Setup
Serial Port 0 Configuration to Serial Port 1
Configuration
PC Health Status
This section displays the SIO hardware health monitor.
Serial Port
Enables or disables the serial port.
Change Settings
Selects the IO/IRQ setting of the I/O device.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
18
SP-2L Series
BIOS Setup
JMB36X ATA Controller Configuration
Chipset
Configures relevant chipset functions.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
19
SP-2L Series
BIOS Setup
North Bridge Configuration
GFX Configuration
NB GPP Core Config
Selects the NB GPP Core configuration.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
20
SP-2L Series
BIOS Setup
Memory Configuration
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
Node 0 Information
21
SP-2L Series
BIOS Setup
South Bridge
North Bridge LVDS Config Select
LVDS
This field is used to enable or disable the LVDS Panel
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
22
SP-2L Series
BIOS Setup
SB USB configuration
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
SB HD Azalia configuration
23
SP-2L Series
BIOS Setup
Fast Boot
Enables or disables boot with initialization of a minimal
set of devices required to launch active boot option. Has
no effect for BBS boot options.
GateA20 Active
Upon Request- GA20 can be disabled using BIOS
services.
Always- Do not allow disabling GA20; this option is
useful when any RT code is executed above 1MB.
Option ROM Messages
Set display mode for option ROM.
Interrupt 19 Capture
Enabled: Allows option ROMs to trap Int 19.
Disabled:
CSM Support
Enabled/ disabled CSM support. If auto is selected,
based on OS, CSM will be enabled/ disabled
automatically.
Boot
Setup Prompt Timeout
Selects the number of seconds to wait for the setup
activation key. 65535(0xFFFF) denotes indefinite waiting.
Bootup NumLock State
This allows you to determine the default state of the
numeric keypad. By default, the system boots up with
NumLock on wherein the function of the numeric keypad
is the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.
Quiet Boot
Enables or disables the quiet boot function.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
24
SP-2L Series
BIOS Setup
Save & Exit
Security
Save Changes and Reset
To save the changes, select this field and then press
<Enter>. A dialog box will appear. Select Yes to reset the
system after saving all changes made.
Discard Changes and Reset
To discard the changes, select this field and then press
<Enter>. A dialog box will appear. Select Yes to reset the
system setup without saving any changes.
Save Changes
Save the changes done so far to any of the setup options.
Discard Changes
Discard the changes done so far to any of the setup
options.
Administrator Password
Sets the administrator password.
User Password
Sets the user password.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
25
SP-2L Series
BIOS Setup
Updating the BIOS
Restore Defaults
To restore and load the optimized default values, select
this field and then press <Enter>. A dialog box will
appear. Select Yes to restore the default values of all the
setup options.
Save as User Defaults
To save changes done so far as user default, select this
field and then press <Enter>. A dialog box will appear.
Select Yes to save values as user default.
Restore User Defaults
To restore user default to all the setup options, select
this field and then press <Enter>. A dialog box will
appear. Select Yes to restore user default.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
To update the BIOS, you will need the new BIOS file and
a fl ash utility, AFUDOS.E XE. Please contact technical
support or your sales representative for the files.
To execute the utility, type:
A:> AFUDOS BIOS_File_Name /b /p /n
then press <Enter>.
26
SP-2L Series
Driver Installation
Insert the driver CD, the driver CD-title will auto start and
show the installation guide. If not, please follow the
sequence below to install the drivers.
Step 3 –Install LAN Driver
1. Click on the STEP3-LAN folder and select the OS
folder your system is
2. Double click on the .exe file located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver
automatically
Step 1 – Install Chipset Driver
1. Click on the STEP1-CHIPSET folder and select the
OS folder your system is
2. Double click on the .exe file located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver
automatically
Step 4 –Install Touch Driver (Optional)
1. Click on the STEP4-TOUCH (Option) folder and select
the OS folder your system is
2. Double click on the .exe located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver
automatically
Step 2 – Install VGA Driver
1. Click on the STEP2-VGA folder and select the OS
folder your system is
2. Double click on the Setup.exe file located in each OS
folder
3. Follow the instructions that the window shows
4. The system will help you install the driver
automatically
Step 5 –Install Rapid Storage Driver (Optional)
1. Click on the STEP5-RAPID S TORAGE (Option) folder
and double click on the setup.exe
2. Follow the instructions that the window shows
3. The system will help you install the driver
automatically
The SP-2L Series comes with an AutoRun CD-ROM that
contains all drivers and utilities that can help you to
install the driver automatically.
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
27
SP-2L Series
Contact Information
Any questions, please contact your local dealer or contact us via the following means:
Add: 10F, No. 2, Jian 8th Rd., Zhonghe Dist., New Taipei City 23511, Taiwan
Tel: +886-2-6621-8811
Fax: +886-2-8226-1518
Sales Email: sales@kingdy.com.tw
Technical Support Email: tech@kingdy.com.tw
Website: www.kingdy.biz
Copyright © 2013 Kingdy Technology Inc. All Rights Reserved.
28
SP-2L Series
Inspiring a reliable solution
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising