O) LaView’ O) LaView’
USER MANUAL
WINWEA WIRE-FREE
SECURITY CAMERA
O) LaView
CATALOGUE
WHAT'S IN THE BOX
APP SET UP PRODUCT WARRANTY CARD
INSTALLATION
TROUBLESHOOTING Your LaView product is protected by a 1-year warranty from
©
E) Lavie W CHARGING CAMERA the purchase date. For more information on repairs,
HUMAN AND MOTION exchanges, and other policies, please visit
DETECTION www.laviewsecurity.com.
OTHERS
FCC COMPLIANCE
CUSTOMER SERVICE
PARAMETER
PRODUCT WARRANTY CARD
Please send all inquiries through the Contact From on our
website, or email us at [email protected]. And our
technicians would be glad to assist you.
To register your product, please visit :
www.laviewsecurity.com/product-registration
©LaView’ O) LaView’ O LaView’ O) LaView’
¥/ WHAT'S IN THE BOX /4 y/ PARAMETER /h
Power button ° PLEASE CONSULT THIS CHECKLIST FOR ALL PARTS. Camera
Charging indicator Image sensor
Micro USB - IR Distance
1/29" Processive Scan CMOS
3.2mm FOV 130°
SD card slot | Day & night IR Cut Filter with auto switch
Status light Ps И aa High-Perfi Embedded SOC P
— D IN = rocessor igh-Performance Embedde rocessor
Photosensitive — 9) LAS Wireless Built-in 2.4G Wi-Fi
Microph ==> é Audio
Icrophone Input Built-in Omni-direction microphone
iu Speaker Output Built-in loudspeaker
N15 Power Adapter Video
Compression Standard H.264
Max. Resolution 1920 x 1080
1~25fps adaptive frame rate of network
Frame Rate ur
transmission
WDR DWDR
Power DC 5V+10% A N Interface
Power on/off Press the button for 3 seconds to turn on / off the camera ouster ge Laview Cloud Storage
Status light « Solid red light on: the camera is turning on or malfunctional User Manual Bracket Micro SD Card ( Max. 128G )
PR BIR Motion Sensor
General
=]
n
UN
N
+ Blinking Red Light: awaiting WiFi connection (slowly blinking)
connecting the WiFi (quickly blinking) -4°F- 122 °F (-20°C ~ 50°C ) humidity 95%
or less (non-condensing)
Power Supply ene Rechargeable Lithium Battery
65
Operating conditions
+ Blinking blue light: currently connecting
+ Solid Blue Light on: the camera runs correctly
SD card slot Support local SD card storage (Max.128G)
Reset Press and hold on for 5 seconds to reset the camera
Charging + Solid Red Light: battery is charging
indicator + Solid Blue Light: charging completed
Battery capacity 14400mAh (three 21700 lithium-ion batteries)
O) LaView’ O LaView’ O) LaView’ O LaView’
Д APP SET UP /h / CUSTOMER SERVICE /4 Y) ЕСС COMPLIANCE /4
© MAKE SURE YOUR PHONE IS CONNECTED TO A 2.4GHZ WIFI
NETWORK
€) COMPLETE THE APP REGISTRATION PROCESS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1- this device may not cause harmful interference,
2- this device must accept any interference received, including interference that may cause
undesired operation.
+ Click on the ‘+ sign to add the camera. Continue to click "Video The manufacturer is not responsible for any radio or tv interference caused by unauthorized
. noo” n modifications or change to this equipment. Such modifications or change could void the
Surveillance" >> "Smart Camera игзег5 authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
For step-by-step Mobile APP set up instruction, please read the Quick
Start Guide included in th k heck out our Youtube tutorials
nn © FOLLOW THE IN-APP INSTRUCTION TO PAIR THE CAMERA
© DOWNLOAD AND INSTALL APP TEL: 626-566-7550
- LaView App is available for both iOS and Android OS. Search the Monday-Friday Hours: 3:00AM-6:00PM PST
name 'LaView, in App Store or Google Play. ( The other LaView apps, * Power On the camera by pressing the Power Button for 3 seconds (If device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
. . . . protection against harmful interference п a residential installation.
such as LaView Connect, LaView ONE, LaView Life do NOT support you are not setting up the camera for the very first time, press the This equipment generates, uses and can radiate radio frequency energy and, if not installed
N15 camera) Reset button instead for 5 seconds until you hear a beep.)' d in | :
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
GETITON Our professional techinicians are commited to television reception, which can be determined by turning the equipment off and on, the user
G | Pl o is encouraged to try to correct the interference by one or more of the following measures:
DD oogle rlay reply all your requests within 24 hours
- Increase the separation between the equipment and receiver.
pepe с - Connect the equipment into an outlet оп a circuit different from that to. which the receiver
# Download on tl o
& A 5 SS t ar = ahem =| is connected.
7 p p ore E - Consult the dealer or an experienced radio/TV technician for help.
LaView &
, To maintain compliance with FCCs RF exposure guidelines, this equipment should be
< Please download the LaView App from the App Store or Scan the If you purchased Lou Amazon, you = also installed and operated with a minimum distance of 20 cm between the radiator and your
OR Code below contact our professional customer service team | Боду.
= in your Amazon account which can be determined by tuming the equipment off and on, the user is encouraged to try to correct
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to.
Which the receiver is connected.
camera is ready for pairing RF waming statement:
To maintain compliance with FCCs RF exposure guidelines, this equipment
< Enter the WiFi Password to generate a OR code that carries your should be installed and operated with a minimum distance of 20 cm
LaView between the radiator and your body.
and used in accordance with the instructions, may cause harmful interference to radio
Email: [email protected]
- Reorient or relocate the receiving antenna.
RF warning statement:
the interference by one or more of the following measures:
< Wait until the LED indicator is flashing rapidly, which means the - Consult the dealer or an experienced radio/TV technician for help.
WiFi information’
O) LaView’ © LaView’ O) LaView’ O) LaView’
Y) INSTALLATION /4
< Use the camera to scan the QR code on the phone
( keep the camera 6-8 inches away from the phone)
< Objects with human body shape such as stuffed toys may be
detected as human and trigger the alerts, remove those if they
constantly show up in the camera
OTHERS Of
After the camera is set up, check the battery status in the LaView APP.
Ensure the battery is fully charged before mounting the camera
Daytime
+ WHAT CAN! DO IF THE IMAGE IS NOT CLEAR?
° The camera is equipped with 1080p Full HD lens and sensor to
Screenshot produce superior image, however the image quality may be affected
by the lighting condition
+ WATERPROOF AND OUTDOOR USE
< The camera is IP65 rated for totally dust tight and protection
against low-pressure jets of directed water from any angle. The + FIND A GOOD MOUNTING SPOT
6-8 inches
Press '| Heard a Prompt’ after the camera receives the OR code and
beeps. The camera will start pairing
When connecting, you should make sure your router, mobile phone,
and camera are as close as possible
Wait until the camera is connected online
Customize the camera name to differentiate cameras in different
locations and finish and paring process
If the pairing is not successful, press the Reset button for 5 seconds
until you hear a beep and start again. Or check the FAO section for
more troubleshooting steps
O) LaView’
MODE: BRACKET INSTALLATION
After fixing your camera,
please lock this screw
After ajusting your camera angle,
please lock this screw
®
1. Fix the bracket on the wall
2. Install the camera in the bracket and lock it with the screw
camera can operate between -4°F ~ 122 °F for all weather use. We
recommend to place the camera under the eave and avoid heavy
rain or snow to maximize camera life span
For more techical questions or tutorials such as Alexa setup, Cloud
Storage setting, please follow in-APP tutorial section in the LaView
APP or visit our Youtube tutorials
We proudly offer manufacture 1 year warranty on all LaView
products
If you wish to return a product within the return period, please
message us directly in your Amazon account or on our website
O) LaView’
Maximum | Length of Each
Recording Frequency Recording Clip
12 clips per day 30 seconds per clip
45 days 24 clips per day 30 seconds per clip
/ HUMAN AND MOTION DETECTION /4
HOW TO TURN ON AND OFF MOTION DETECTION?
- To turn on or off motion detection and Human detection setting, go
to the camera menu and click on Detection Alarm Settings
WHAT CAN IDO IF I CANNOT RECEIVE NOTIFICATIONS?
+ LaView camera uses the advance 3D Al Humanoid Analysis
technogy that only send notificaitons when a human is detected
< Ensure your phone notification setting is enabled for LaView APP
< Ensure the phone has decent network bandwidth
< Ensure the camera is online
+ WHAT CAN IDO IFI RECEIVE TOO MANY NOTIFICATIONS?
< Ensure the Human Al detection filter is enabled
< If the camera 15 placed at a location with large traffic, we
recommend to relocate it to a place with less traffic to receive less
alerts and extend battery life
HO
- Use the WiFi Signal Indicator EE in the APP live view screen to
test the WiFi signal strength. Move the camera as close to the
router as possible if the WiFi signal is poor
< Hang the N15 6-10ft (2-3m) above the ground for maximum
detection range and accuracy. Avoid direct sunlight to the N15.
paa Camera field of view
PIR Motion Detection Zone
Up to 30ft (10m) — |
6
© LaView’
}/ TROUBLESHOOTING /4
° IF YOU CANNOT CONNECT THE CAMERA TO THE INTERNET,
CHECK THE FOLLOWING STEPS
» Li (Ce
2.4GHz 5GHz
Y X
Ensure WiFi password or SSID is correct
Ensure the camera is placed as close to the router as
possbile
Ensure camera is powered on and the indicator is blinking
rapidly before scanning the QR code
Charge the camera for some time to ensure the battery is not
completely out
Ensure you are using the correct APP ( LaView )
Ensure the camera is scanning the QR code on the phone in the
correct way
If the above steps doesn't help, reset the camera and start pairing
again
+ WHAT CAN I DO IF THE CAMERA STOPPED WORKING?
< Close the APP and Restart the APP again
< Ensure the camera 15 NOT facing to envirinmoent with poor lighting
condition or with extremae high contrast. Ensure it is NOT facing
directly to bright lighting sources such as sun light
° Ensure your phone and your router has enough bandwidth to
stream HD video. A minimum of 2MBps is required to stream each
1080p camera. If the network does not meet this requirement, the
live view stream will be downgraded to SD automatically
° NIGHT VISION
+ The camera is equiped with Infrared LED technology to capture
black and white night vision image in detail at night. However, the
night vision image quality may be affected by the following factor:
+ There are high contrast light sources such as car headlight pointing
to the camera
11
O) LaView’
< Check if WIFI password or router is changed. If so please reset the camera
< Ensure router in powered on and online
+ Ensure camera has power
< Ensure the phone has decent network bandwidth
+ Check the app is on latest version
¥/ CHARGING CAMERA /4
Use the included microUSB cable to connect the N15 to the
included USB charger. Charging time may be longer if you use
universal USB charger and cable.
< Ensure the camera is fully charged before you mount it to the bracket
< To charge the battery, unplug the camera from the bracket and connect
it to the included USB charger via the USB cable
< Due to the large battery capacity, it could take up to 12-14 hours to
fully charge the battery
< The LED indicator will turn to Blue when the camera is fully charge
< You can check the battery level in the LaView APP
° Maximum battery life for each charge varies based on actual
environment and scenario
">
