DAS WESENTLICHE.
Leica Camera AG│Am Leitz-Park 5
35578 WETZLAR│DEUTSCHLAND
Telefon +49(0)6441-2080-0
Telefax +49(0)6441-2080-333 www.leica-camera.com
93 718 XII/18/B&S
APO-SUMMICRON-SL
1:2/35 ASPH.
ANLEITUNG | INSTRUCTIONS
NOTICE D’UTILISATION | GEBRUIKSAANWIJZING
ISTRUZIONI | INSTRUCCIONES
說明書
|
使用说明
|
사용 설명서
ИНСТPYКЦИЯ |
取扱説明書
| PANDUAN
FOREWORD
Dear Customer,
We wish you a great deal of fun and success taking photographs with your new lens. Please read this manual to familiarize yourself with the full scope of functions your lens has to offer.
Your Leica Camera AG
PART DESIGNATIONS
1
1a
2c
2b
2a
3
4
1
2
5
Lens hood a Alignment point
Front mount a Male bayonet for lens hood b c
Index point for lens hood
Internal thread for filters
Focus ring
Alignment button for lens replacement
Contact strip
EN
3
4
5
7
EN
DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT
( Applies within the EU and for other European countries with active waste separation policies )
This device contains electric and/or electronic components which must not be disposed of in general household waste. Instead, it should be disposed of at a recycling collection point provided by your local authority. This service is free of charge. Any standard or rechargeable batteries used in this device must be removed and disposed of separately in accordance with local regulations.
Please contact your local authorities, waste disposal collection point or the retailer, from whom you purchased the device for more information on correct waste disposal.
SAFETY REMARK
• A camera lens can have the effect of a magnifying glass when exposed to direct frontal sunlight.
The camera must therefore be protected against extended exposure to direct sunlight. Using the lens cap and keeping the camera in the shade (ideally in its camera case) will help prevent damage to the interior of the camera.
GENERAL INFORMATION
• Make a note of the serial numbers of your camera (engraved in the base of the camera housing) and lenses, as this information will be extremely important in case of loss.
• Make sure to always have a lens or the camera bayonet cover attached to prevent dust or other foreign bodies penetrating the camera.
• That is why you should always replace lenses quickly and in a dust-free environment.
• Never store the camera bayonet cover or the rear lens cover in a pants pocket, as they will attract lint and dust, which could then be accidentally introduced into the camera.
• Leica releases firmware updates for lenses at irregular intervals. You can download any new firmware version from our homepage and transfer it to your lens.
8
SPECIAL FEATURES
Please visit the Leica Camera AG homepage for more information about the visual and technical details: http://us.leica-camera.com
DESIGN OF THE LEICA SL LENSES
All Leica SL lenses basically look the same on the outside: On the front mount there is an external bayonet fitting for the lens hood and an internal thread for filters, as well as a focus ring and an alignment button for lens changes.
All data exchange between the camera and lens is effected via a contact strip in the bayonet, including the control commands for autofocus and aperture.
EN
9
EN
FOCUSING
In autofocus mode, the camera sets the sharpness automatically, while the user turns the focus ring 3 manually in manual mode. The speed at which you turn the ring determines how quickly the setting changes. You can therefore make fine adjustments or quickly move from a close-up to a long range setting. Please refer to the relevant sections in the camera manual for more details.
DEPTH OF FIELD
No depth of field scale is provided, because Leica SL lenses don’t come with an aperture settings ring. Instead, the top display of the camera shows the near and far focal length limits of the depth of field alongside the set distance.
LENS HOOD
The APO-Summicron-SL 35 f/2 ASPH. comes with a lens hood 1 optimally adapted to the beam paths. As the bayonet fitting is perfectly symmetrical, the lens hood can be attached in reverse for space-saving storage. In both cases, it is attached (with the lens cap removed) with one of the alignment points on the lens hood 1a aligning with the alignment point on the front mount of the lens
2b . It is then turned by approx. 30° in clockwise direction until it audibly clicks into place.
The lens hood should remain attached as long as the camera is carried ready for use or is in use. It effectively eliminates contrast-reducing stray light and protects the front lens against damage and soiling (e.g. accidental fingerprint marks).
FILTERS
The APO-Summicron-SL 35 f/2 ASPH. is compatible with screw-in filters of type E67. Matching filters are available from Leica.
REPLACEMENT PARTS/ACCESSORIES
Please contact Leica Customer Care or visit the Leica Camera AG website for information about the extensive range of Leica replacement parts/accessories available for your lens: en.leica-camera.com/Photography/Leica-SL/SL-Lenses
10
TECHNICAL DATA
High-speed, wide-angle lens with outstanding rendering capacity
Compatible cameras
View angles
(diagonal, horizontal, vertical)
Any Leica camera with a Leica L bayonet fitting 1 for Leica SL system: approx. 63°, 54°, 38° for Leica TL system: approx. 47°, 40°, 27°
(equivalent to around 53 mm focal length in 35 mm format)
Lens system
Number of lenses/components
Aspherical surfaces
Position of the entrance pupil
(to the bayonet, at infinity setting)
Focusing
Setting
13/11
5
66.4 mm
Focus range
Smallest object field/largest scale
Choose automatic (Autofocus) or manual mode on the camera
0.27 m - ∞ for Leica SL system: approx. 120 x 180 mm/1:5 for Leica TL system: approx. 79 x 118 mm/1:5
Aperture
Setting/Function
Lowest value
Bayonet
Filter mount/lens hood
Electronically controlled aperture, setting on the camera, half or third values can also be set
22
Leica L bayonet fitting with contact strip
Male bayonet for lens hood (included), internal thread for E67 filters, filter mount does not rotate
Black, anodized Finish
Dimensions
Length to bayonet flange
Largest diameter
Weight approx. 102/136 mm (without/with lens hood) approx. 73/105 mm (without/with lens hood) approx. 700/750 g (without/with lens hood)
1 Never hold the camera with the lens attached by the camera housing only; always support the lens as well. This relieves pressure on the camera bayonet fitting.
EN
11
EN
LEICA CUSTOMER CARE
Please contact the Customer Care department of Leica Camera AG for the maintenance of your Leica equipment and for help and advice regarding Leica products and how to order them. You can also contact the Customer Care department or the repair service provided by your regional Leica subsidiary for repairs or warranty claims.
Leica Camera AG
Leica Customer Care
Am Leitz-Park 5
35578 Wetzlar
Germany
Phone: +49 (0)6441 2080-189
Fax: +49 (0)6441 2080-339
Email: [email protected]
www.leica-camera.com
LEICA ACADEMY
Have a look at our full seminar program with many interesting workshops on the topic of photography at: us.leica-camera.com/Leica-Akademie/Global-Leica-Akademie
12
MTF
73
74
f/2 f/8 f/2 f/5.6
MTF f/8
75
Inhalt Chin_Simple_ddm_r1_Leica M8 deutsch 02.12.2009 11:31 Seite 2
产品说明书附件
SUPPLEMENT TO PRODUCT INSTRUCTIONS
这个文件涉及的是在中华人民共和国境内进口或销售的电子信息产品
Include this document with all Electronic Information Products imported or sold in the People’s Republic of China
APO-SUMMICRON-SL
1:2/35 ASPH.
10 801
徠卡 S2-P
10 802
有毒有害物质和元素
Toxic and Hazardous Substances and Elements
部件名称
Part Name
铅 汞
Lead
(Pb)
Mercury
(Hg)
镉 六价铬 多溴联苯 多溴二苯醚
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated biphenyls
(PBB)
Polybrominated diphenyl ethers
(PBDE)
电路模块
(Circuit Modules)
电缆及电缆组件
(Cables & Cable Assemblies)
金属部件
(Metal Parts)
塑料和聚合物部件
(Plastic and Polymeric parts)
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
光学和光学组件
(Optics and Optical Components)
电池
(Batteries)
O
O
O
O
O
O
O
O
O
O
O
O
O:
表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。
Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.
X:
表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。
Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.
All parts named in this table with an X are in compliance with the European Union's RoHS Legislation "Directive
2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment."
除非另外特别的标注,此标志为针对所涉及产品的环保使用期标志。某些零部件会有一个
不同的环保使用期(例如,电池单元模块)贴在其产品上。
此环保使用期限只适用于产品是在产品手册中所规定的条件下工作。
The Environmentally Friendly Use Period (EFUP) for all enclosed products and their parts are per the symbol shown here, unless otherwise marked. Certain parts may have a different EFUP (for example, battery modules) and so are marked to reflect such. The
Environmentally Friendly Use Period is valid only when the product is operated under the conditions defined in the product manual.
2
DAS WESENTLICHE.
Leica Camera AG│Am Leitz-Park 5
35578 WETZLAR│DEUTSCHLAND
Telefon +49(0)6441-2080-0
Telefax +49(0)6441-2080-333 www.leica-camera.com
93 718 XII/18/B&S
APO-SUMMICRON-SL
1:2/35 ASPH.
ANLEITUNG | INSTRUCTIONS
NOTICE D’UTILISATION | GEBRUIKSAANWIJZING
ISTRUZIONI | INSTRUCCIONES
說明書
|
使用说明
|
사용 설명서
ИНСТPYКЦИЯ |
取扱説明書
| PANDUAN
APO-SUMMICRON-SL
35 f/2 ASPH.
Technical Data.
ENGINEERING DRAWING LENS SHAPE
Asperical Lenses
Focus group
Illustrations 1:2
Lens
Order no.
Field angle
(diagonal, horizontal, vertical)
Optical design
Number of lenses/groups
Number of asph. surfaces / lenses
Entrance pupil position before bayonet level
Distance setting
Working range
Smallest object field
Largest reproduction ratio
Aperture
Setting/function
Aperture setting range
Lowest value
Bayonet/sensor format
Filter mount
Dimensions and weight
Length to bayonet mount
Largest diameter
Weight
APO-Summicron-SL 35 f/2 ASPH.
11 184
63.4°/54.4°/37.9°
13/11
5/3
66.4mm at ∞
∞ to 0.27 m
120 x 180 mm
1:5
Electronically controlled aperture, set using turn/push wheel on camera, including half and third values
2 - 22
22
L-Mount, full-frame 35 mm format
E67
102 mm
73 mm
750 g
Leica Camera AG
Page 1 of 2 I As at October 2018 I Specifications are subject to change without notice
I Am Leitz-Park 5 I 35578 WETZLAR I GERMANY I Telephone +49(0)6441-2080-0 I Fax +49(0)6441-2080-333 I www.leica-camera.com
APO-SUMMICRON-SL
35 f/2 ASPH.
MTF DIAGRAMS
Infinity ( ∞ )
Aperture Stop 2.0
Close distance (0.5 m)
Aperture Stop 2.0
Aperture Stop 5.6
Aperture Stop 8.0
Aperture Stop 5.6
Aperture Stop 8.0
Sagittal structures
Tangential structures
MTF GRAPHS The MTF is shown in each case f or the maximum aperture and the aperture values 5.6 and 8.0 for long focusing distances (infinity).
The contrast is plotted for 5, 10, 20, 40 lines/mm for the height of the format for tangential (dashed line) and sagittal structures
(continuous line) for white light. The plots for 5 and 10 lines/mm provide an impression of the contrast performance for coarser object structures and the 20 and 40 lines/mm plots document the resolving power for fine and finest object structures.
Leica Camera AG
Page 2 of 2 I As at October 2018 I Specifications are subject to change without notice
I Am Leitz-Park 5 I 35578 WETZLAR I GERMANY I Telephone +49(0)6441-2080-0 I Fax +49(0)6441-2080-333 I www.leica-camera.com