Philips 57PFL7603D Car Satellite TV System User manual

Add to my manuals
43 Pages

advertisement

Philips 57PFL7603D Car Satellite TV System User manual | Manualzz

Register your product and get support at

57PFL7603D

52PFL7603D

47PFL7603D

42PFL7603D

EN User Manual

FR Manuel de l’utilisateur

ES Guía del usuario

EN : For further assistance, call the customer support service in your country.

• U.S.A., PUERTO RICO, OR U.S. VIRGIN ISLANDS:

1-888-PHILIPS (1-888-744-5477)

• CANADA: 1-800-661-6162 (French speaking),

1-888-PHILIPS (1-888-744-5477) - (English or Spanish)

Enter below the Serial No. located on the rear of the cabinet.

FR : Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service à la clientèle de votre pays.

• POUR OBTENIR DE L’AIDE AUX ÉTATS-UNIS, À PUERTO RICO OU AUX ÎLES

VIERGES AMÉRICAINES:

1-888-PHILIPS (1-888-744-5477)

• CANADA : 1-800-661-6162 (pour français),

1-888-PHILIPS (1-888-744-5477) - (pour anglais ou en espagnol)

Entrez ci-dessous le numéro de série qui se trouve à l’arrière du boîtier du dispositif.

ES : Para obtener más información, llame al servicio de soporte al cliente de su país.

• LOS ESTADOS UNIDOS, PUERTO RICO O EN LAS ISLAS VÍRGENES DE LOS

ESTADOS UNIDOS:

1-888-PHILIPS (1-888-744-5477)

• CANADÁ: 1-800-661-6162 (en francés),

1-888-PHILIPS (1-888-744-5477) - (en inglés o español)

Escriba a continuación el Nº de serie, el cual se encuentra en la parte posterior del gabinete.

Model / Modèle / Modelo :

Serial / Série / Serie:

Return your Product Registration Card or register online at www.philips.com/welcome today to get the very most from your purchase.

Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out.

Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure:

*Additional Benefits *Proof of

Purchase

Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service.

*Product Safety

Notification

By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.

Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers.

Congratulations on your purchase, and welcome to the “family!”

Dear PHILIPS product owner:

Thank you for your confidence in PHILIPS.You’ve selected one of the best-built, best-backed products available today.We’ll do everything in our power to keep you happy with your purchase for many years to come.

As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding service networks in the industry.What’s more, your purchase guarantees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network.

Most importantly, you can count on our uncompromising commitment to your total satisfaction.

All of this is our way of saying welcome - and thanks for investing in a PHILIPS product.

Know these

safety

symbols

C A U T I O N

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

t

This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

s

The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.

WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION: Pour éviter les choc électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

P.S. To get the most from your PHILIPS purchase, be sure to complete and return your Product Registration

Card at once, or register online at: www.philips.com/welcome

For Customer Use

Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future reference.

Model No.__________________________

Serial No.

________________________

Visit our World Wide Web Site at http://www.philips.com/welcome

EN-1

)-0/24!.43!&%49).3425#4)/.3

2EADBEFOREOPERATINGEQUIPMENT

2EADTHESEINSTRUCTIONS

+EEPTHESEINSTRUCTIONS

(EEDALLWARNINGS

&OLLOWALLINSTRUCTIONS

$ONOTUSETHISAPPARATUSNEARWATER

#LEANONLYWITHADRYCLOTH

$ONOTBLOCKANYOFTHEVENTILATIONOPENINGS)NSTALLINACCORDANCEWITH

THEMANUFACTURERSINSTRUCTIONS

$ONOTINSTALLNEARANYHEATSOURCESSUCHASRADIATORSHEATREGISTERS

STOVESOROTHERAPPARATUSINCLUDINGAMPLIâERS THATPRODUCEHEAT

$ONOTDEFEATTHESAFETYPURPOSEOFTHEPOLARIZEDORGROUNDINGTYPEPLUG

!POLARIZEDPLUGHASTWOBLADESWITHONEWIDERTHANTHEOTHER!

GROUNDINGTYPEPLUGHASTWOBLADESANDTHIRDGROUNDINGPRONG4HEWIDE

BLADEORTHIRDPRONGAREPROVIDEDFORYOURSAFETY7HENTHEPROVIDED

PLUGDOESNOTâTINTOYOUROUTLETCONSULTANELECTRICIANFORREPLACEMENT

OFTHEOBSOLETEOUTLET

0ROTECTTHEPOWERCORDFROMBEINGWALKEDONORPINCHEDPARTICULARLYAT

PLUGSCONVENIENCERECEPTACLESANDTHEPOINTWHERETHEYEXITFROMTHE

APPARATUS

/NLYUSEATTACHMENTSACCESSORIESSPECIâEDBYTHEMANUFACTURER

5SEONLYWITHACARTSTANDTRIPODBRACKETORTABLESPECIâEDBY

THEMANUFACTURERORSOLDWITHTHEAPPARATUS7HENACARTIS

USEDUSECAUTIONWHENMOVINGTHECARTAPPARATUSCOMBINATION

TOAVOIDINJURYFROMTIPOVER

5NPLUGTHISAPPARATUSDURINGLIGHTNINGSTORMSORWHENUNUSEDFORLONG

PERIODSOFTIME

2EFERALLSERVICINGTOQUALIâEDSERVICEPERSONNEL3ERVICINGISREQUIRED

WHENTHEAPPARATUSHASBEENDAMAGEDINANYWAYSUCHASPOWERSUPPLY

CORDORPLUGISDAMAGEDLIQUIDHASBEENSPILLEDOROBJECTSHAVEFALLEN

INTOAPPARATUSTHEAPPARATUSHASBEENEXPOSEDTORAINORMOISTURE

DOESNOTOPERATENORMALLYORHASBEENDROPPED

4HISPRODUCTMAYCONTAINLEADORMERCURY$ISPOSALOFTHESEMATERIALS

MAYBEREGULATEDDUETOENVIRONMENTALCONSIDERATIONS&ORDISPOSALOR

RECYCLINGINFORMATIONPLEASECONTACTYOURLOCALAUTHORITIESORTHE

%LECTRONIC)NDUSTRIES!LLIANCEWWWEIAEORG

$AMAGE2EQUIRING3ERVICE4HEAPPLIANCESHOULDBESERVICEDBY

QUALIâEDSERVICEPERSONNELWHEN

!4HEPOWERSUPPLYCORDORTHEPLUGHASBEENDAMAGEDOR

"/BJECTSHAVEFALLENORLIQUIDHASBEENSPILLEDINTOTHEAPPLIANCEOR

#4HEAPPLIANCEHASBEENEXPOSEDTORAINOR

$4HEAPPLIANCEDOESNOTAPPEARTOOPERATENORMALLYOREXHIBITSA

MARKED

CHANGEINPERFORMANCEOR

%4HEAPPLIANCEHASBEENDROPPEDORTHEENCLOSUREDAMAGED

4ILT3TABILITY!LLTELEVISIONSMUSTCOMPLYWITHRECOMMENDED

INTERNATIONALGLOBALSAFETYSTANDARDSFORTILTANDSTABILITYPROPERTIESOFITS

CABINETSDESIGN

Ù$ONOTCOMPROMISETHESEDESIGNSTANDARDSBYAPPLYINGEXCESSIVEPULL

FORCETOTHEFRONTORTOPOFTHECABINETWHICHCOULDULTIMATELY

OVERTURNTHEPRODUCT

Ù!LSODONOTENDANGERYOURSELFORCHILDRENBYPLACINGELECTRONIC

EQUIPMENTTOYSONTHETOPOFTHECABINET3UCHITEMSCOULD

UNSUSPECTINGLYFALLFROMTHETOPOFTHESETANDCAUSEPRODUCTDAMAGE

ANDORPERSONALINJURY

7ALLOR#EILING-OUNTING4HEAPPLIANCESHOULDBEMOUNTEDTOA

WALLORCEILINGONLYASRECOMMENDEDBYTHEMANUFACTURER

0OWER,INES!NOUTDOORANTENNASHOULDBELOCATEDAWAYFROM

POWERLINES

/UTDOOR!NTENNA'ROUNDING)FANOUTSIDEANTENNAISCONNECTEDTO

THERECEIVERBESURETHEANTENNASYSTEMISGROUNDEDSOASTOPROVIDE

SOMEPROTECTIONAGAINSTVOLTAGESURGESANDBUILTUPSTATICCHARGES

3ECTIONOFTHE.ATIONAL%LECTRIC#ODE!.3).&0!.O

PROVIDESINFORMATIONWITHRESPECTTOPROPERGROUNDINGOFTHEMATSAND

SUPPORTINGSTRUCTUREGROUNDINGOFTHELEADINWIRETOANANTENNA

DISCHARGEUNITSIZEOFGROUNDINGCONNECTORSLOCATIONOFANTENNA

DISCHARGEUNITCONNECTIONTOGROUNDINGELECTRODESANDREQUIREMENTSFOR

THEGROUNDINGELECTRODE3EE&IGUREBELOW

/BJECTSAND,IQUID%NTRY#ARESHOULDBETAKENSOTHATOBJECTSDO

NOTFALLANDLIQUIDSARENOTSPILLEDINTOTHEENCLOSURETHROUGHOPENINGS

A 7ARNING4OREDUCETHERISKOFâREORELECTRICSHOCKTHISAPPARATUS

SHOULDNOTBEEXPOSEDTORAINORMOISTUREANDOBJECTSâLLEDWITH

LIQUIDSSUCHASVASESSHOULDNOTBEPLACEDONTHISAPPARATUS

"ATTERY5SAGE#!54)/.4OPREVENTBATTERYLEAKAGETHATMAY

RESULTINBODILYINJURYPROPERTYDAMAGEORDAMAGETOTHEUNIT

Ù)NSTALLALLBATTERIESCORRECTLYWITHANDALIGNMENTASMARKEDONTHE

UNIT

Ù$ONOTMIXBATTERIESOLDANDNEWORCARBONANDALKALINEETC

Ù2EMOVEBATTERIESWHENTHEUNITISNOTUSEDFORALONGTIME

%8!-0,%/&!.4%..!'2/5.$).'!30%2

.!4)/.!,%,%#42)#!,#/$%.%#

'2/5.$#,!-0

!.4%..!,%!$).7)2%

!.4%..!$)3#(!2'%5.)4

.%#3%#4)/.

EN-2

COVERINDD

'2/5.$).'#/.$5#4/23

.%#3%#4)/.

'2/5.$#,!-03

%,%#42)#3%26)#%%15)0-%.4

0/7%23%26)#%'2/5.$).'

%,%#42/$%3934%-

.%#!24

0!24(

.OTETOTHE#!46SYSTEMINSTALLERTHISREMINDERISPROVIDEDTOCALLTHE#!46SYSTEMINSTALLERÒSATTENTIONTO!RTICLEOF

THE.%#THATPROVIDESGUIDELINESFORPROPERGROUNDINGANDINPARTICULARSPECIâESTHATTHECABLEGROUNDSHALLBECONNECTEDTOTHE

GROUNDINGSYSTEMOFTHEBUILDINGASCLOSETOTHEPOINTOFCABLEENTRYASPRACTICAL

0-

2007 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.

Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

Philips can’t be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document.

Errors reported to Philips will be adapted and published on the Philips support website as soon as possible.

Warranty

No components are user-serviceable. Do not open or remove covers to the inside of the product.

Repairs may only be done by Philips Service Centers and official repair shops. Failure to do so shall void any warranty, stated or implied. Any operation expressly prohibited in this manual, any adjustments, or assembly procedures not recommended or authorised in this manual shall void the warranty.

Pixel characteristics

This LCD product has a high number of color pixels.

Although it has effective pixels of 99,999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of the display (within common industry standards) and is not a malfunction.

Open source software

This television contains open source software.

Philips hereby offers to deliver or make available, upon request, for a charge no more than the cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code on a medium customarily used for software interchange.

This offer is valid for a period of 3 years after the date of purchase of this product. To obtain the source code, write to

Philips Consumer Lifestyle

Development Manager

LoB Mainstream Displays

620A Lorong 1, Toa Payoh

Singapore 319762

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio or television technician for help.

Modifications

The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Philips Consumer

Lifestyle may void the user’s authority to operate the equipment.

Cables

Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods to maintain compliance with FCC Rules and

Regulations.

Canadian notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment

Regulations.

Avis Canadien

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Copyright

VESA, FDMI and the VESA Mounting Compliant logo are trademarks of the Video Electronics Standards

Association.

Manufactured under license from Dolby

Laboratories. ‘Dolby’ and the double D symbol are trademarks of Dolby Laboratories.

Manufactured under license from BBE Sound, Inc.

Licensed by BBE, Inc under one or more of the following US patents: 5510752,5736897. BBE and

BBE symbol are registered trademarks of BBE Sound

Inc.

® Kensington and Micro Saver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. All other registered and unregistered trademarks are the property of their respective owners.

Portions of this software are copyright © The

FreeType Project (www.freetype.org).

EN-3

Contents

1.

2.

3. Get started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Position the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Install the remote control batteries . . . . . . . . . . . . . . . . . 7

Connect the antenna or cable . . . . . . . . . . . . . . . . . . . . . 7

Connect the power cord . . . . . . . . . . . . . . . . . . . . . . . . . 8

Manage cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Switch on and setup the TV . . . . . . . . . . . . . . . . . . . . . . . 9

7. Update your TV software . . . . . . . . . . . . . . . . . 28

Check your current software version . . . . . . . . . . . . . . 28

Prepare for the software upgrade . . . . . . . . . . . . . . . . . 28

Upgrade software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4.

Important . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Product information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Screen care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Environmental care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Regulatory notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Television overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Use your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Switch your TV on/off or to standby . . . . . . . . . . . . . . . 10

Watch TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Watch channels from a set-top box. . . . . . . . . . . . . . . . 11

Watch connected devices. . . . . . . . . . . . . . . . . . . . . . . . 11

Watch a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6. Change your TV installation . . . . . . . . . . . . . . . 26

Select your menu language . . . . . . . . . . . . . . . . . . . . . . . 26

Set your location to home . . . . . . . . . . . . . . . . . . . . . . . 26

Tune channels automatically . . . . . . . . . . . . . . . . . . . . . . 26

Optimize the signal quality from your antenna . . . . . . . 26

Uninstall and reinstall channels. . . . . . . . . . . . . . . . . . . . 27

Return your settings to default values . . . . . . . . . . . . . . 27

Show emergency alerts (EAS) . . . . . . . . . . . . . . . . . . . . 27

8. Connect devices . . . . . . . . . . . . . . . . . . . . . . . . 29

Connection overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Select your connection quality . . . . . . . . . . . . . . . . . . . . 30

Label your connections. . . . . . . . . . . . . . . . . . . . . . . . . . 30

Connect your devices. . . . . . . . . . . . . . . . . . . . . . . . . . . 31

9.

Use your TV in HDTV mode . . . . . . . . . . . . . . . . . . . . . 24

Use your TV as a PC monitor . . . . . . . . . . . . . . . . . . . . 24

Use Philips EasyLink . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Use the demo mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

10. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 35

5. Use more of your TV . . . . . . . . . . . . . . . . . . . . 12

Understand the remote control. . . . . . . . . . . . . . . . . . . 12

Use the quick access menu . . . . . . . . . . . . . . . . . . . . . . 13

Change picture and sound settings . . . . . . . . . . . . . . . . 13

Change Ambilight settings. . . . . . . . . . . . . . . . . . . . . . . . 15

Use Auto Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Create and use lists of favorite channels . . . . . . . . . . . . 16

Set the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Set the sleeptimer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Use child control and rating locks . . . . . . . . . . . . . . . . . 18

View closed captions (subtitles) . . . . . . . . . . . . . . . . . . . 21

View photos and play music on a USB device . . . . . . . . 22

11. Notes for the use of USB devices . . . . . . . . . . 36

12. Technical specifications . . . . . . . . . . . . . . . . . . . 37

13. Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

14. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

EN-4

1. Important

Congratulations on your purchase and welcome to Philips!

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don’t miss out.

Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure:

• Proof of Purchase

Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service.

Product Safety Notification

By registering your product you’ll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.

Additional Benefits of Product Ownership

Registering your product guarantees that you’ll receive all of the privileges to which you’re entitled, including special money-saving offers.

1.2 Screen care

• Turn off and unplug the power cord before cleaning the screen.

• Clean the screen with a soft, dry cloth. Do not use substances such as household cleaning agents as these may damage the screen.

To avoid deformations or color fading, wipe off water droplets as soon as possible.

Do not touch, push, rub or strike the screen with hard objects as this may damage the screen permanently.

Where possible, avoid stationary images that remain on-screen for extended periods of time. If you must use stationary images, reduce the screen contrast and brightness to avoid screen damage.

D Note: notice.

Specifications and information are subject to change without

For further assistance, call the customer support service in your country.

• TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO RICO, OR U.S.

VIRGIN ISLANDS. Contact Philips Customer Care Center at:

1-888-PHILIPS (1-888-744-5477)

• TO OBTAIN ASSISTANCE IN CANADA. Contact Philips Customer

Care Center at:

1-800-661-6162 (French Speaking)

1-888-PHILIPS (1-888-744-5477) - (English or Spanish Speaking)

1.1 Product information

The model and serial number are on the rear of the TV and on the packaging.

This TV consumes minimal energy in standby mode to minimize environmental impact. The active power consumption is given on the type plate at the rear of the TV.

1.3 Environmental care

Recycling

The packaging of this product is intended to be recycled. Contact your local authorities for information about how to recycle the packaging.

End of life directives

Like all LCD products, this set contains a lamp with Mercury, please dispose of according to all Local, State and Federal laws.

Philips is paying a lot of attention to produce environmentally-friendly products in green focal areas. Your new TV contains materials which can be recycled and reused. At the end of its life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed off. Please ensure you dispose off your old TV according to local regulations.

Disposal of batteries

The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations.

1.4 Regulatory notices

B WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture. Objects filled with liquids, such as vases, should not be placed on this apparatus.

C CAUTION: To prevent electric shock, match the wide blade of the plug to the wide slot, fully insert.

EN-5

2. Your TV

This section describes the controls and functions of your TV.

2.1 Television overview

Front and side controls

VOLUME

4

3

MENU

CHANNEL

2

1

POWER

4.

5.

1.

2.

3.

5

Power switch

Channel up/down

Menu

The MENU key can be used as an OK key in some submenus.

Volume up/down

Remote control sensor

Side connectors

For more information about TV connections, see Connect your devices on page 31 .

2.2 Remote control

AMBILIGHT

ON/OFF MODE

4

5

6

7

1

2

3

8

Use the TV side connectors to connect to mobile devices such as a camera or high definition game console. You can also connect a pair of headphones or a USB memory device.

Back connectors

TV ANTENNA

HDMI 1

SERV. U

SPDIF

OUT Pr

Pb

Pr

Pb VIDEO

S-VIDEO

HDMI 2

AV 1 AV 2 AV 3 IN

HDMI 3

Cable

Use the TV back connectors to connect to the antenna or cable, and to permanent devices such as a high definition disc player, DVD player, or

VCR.

7.

8.

5.

6.

3.

4.

1.

2.

Standby / ON

Source selection

Color buttons

Cursor buttons

OK button

Menu button

Channel selection

Volume

For more information about the remote control, see Understand the remote control on page 12 .

EN-6

3. Get started

3. batteries line up correctly (inside of case is marked).

Close the cover.

This section describes how to position and connect your TV, and how to perform your first-time installation.

D Note: If you are not going to use the remote control for a long time, remove the batteries.

3.1 Position the TV

B Warning

• Do not insert the power plug into the wall socket before all the connections are made.

• Large screen TVs are heavy. Two people are required to carry and handle the TV.

• Before you move your TV, disconnect the cables to prevent breakage.

Wherever you decide to position your TV, ensure that you always have easy access to the power cord or plug to disconnect the TV from the power.

If the TV is mounted on a swivel base or swivel arm, ensure no strain is placed on the power cord when the TV is swivelled. Strain on the power cord can loosen connections.

For ideal viewing conditions, position the TV where light does not fall directly on the screen.

The ideal viewing distance for watching TV is three times its screen size.

3.3 Connect the antenna or cable

This section describes how to connect your TV to an antenna, cable,

Direct Broadcast Satellite, and to a set-top box.

TV ANTENNA

HDMI 1

R

L

Pr

Pb

Y

HDMI 2

AV 1

R

L

Pr

Pb

Y

R

L

VIDEO

S-VIDEO

L

R

SPDIF

OUT

AV 2 AV 3 D I AUDIO

IN

D

HDMI 3

Cable

Kensington security slot

Your TV is equipped with a Kensington Security Slot at the back of the

TV.

If you connect an anti-theft Kensington lock (not supplied), position the

TV within reach of a permanent object that can be attached to the lock.

Connect to an antenna

Any DTV programs that are broadcast in your area can be received for free through an antenna connection.

Contact your local content provider or your local electronics retailer if you are unsure about what HDTV programs are available in your area.

Broadcasters are transitioning from analog to digital TV. This means that a given broadcaster can have channels available either in analog or in digital, or both analog and digital at the same time.

The TV has stereo sound if the broadcasting channel makes it available.

3.2 Install the remote control batteries

1.

2.

Open the battery cover on the back of the remote control.

Insert the 2 batteries supplied. Make sure the + and - ends of the

Connect to a cable

When your TV is connected to the cable socket, you may receive free digital and high definition programming (depending on your cable provider). Digital and high definition cable channels can be recognized by the format of the channel number. The channel number includes a dot "." For example, 11.1, 46.30, 108.201. Contact your cable provider for more information.

Connect to a Direct Broadcast Satellite (DBS)

There are two main DBS systems: DirecTV and DishNetwork. These systems require a separate, proprietary set-top box to decode signals and send them to the TV. The set-top box contains a digital TV tuner for receiving off-air digital television broadcasts.

Contact your local DBS provider for more information about the connections and the TV channels.

Connect to a set-top box

A cable box or satellite set-top box can be connected to the TV through the following connections:

• ANT

A/V (Composite Video and Audio)

S-Video

EN-7

YPbPr (Component Video Input)

HDMI

For information about how to connect a set-top box, see the Quick Start

Guide provided.

3.4 Connect the power cord

B WARNING: Verify that your voltage corresponds with the voltage printed at the back of the TV. Do not insert the power cord if the voltage is different.

Connect a set-top box through RF IN/OUT

If the TV is connected to a cable box or satellite set-top box via a coaxial connection, set the TV to channel 3 and 4, or the channel specified by the service provider.

To connect the power cord

1.

The location of the power connector varies according to TV model.

TV ANTENNA

HDMI 1

SPDIF

OUT

Pr

Pb

Pr

Pb VIDEO

S-VIDEO

HDMI 2

AV 1 AV 2 AV 3

D

IN

HDMI 3

Connect a set-top box through component video input or

HDMI

TV ANTENNA

HDMI 1

SERV. U

Pr

Pb

Pr

Pb VIDEO

S-VIDEO

SPDIF

OUT

HDMI 2

AV 1 AV 2 AV 3 D

IN

HDMI 3

HDMI 1

L

R

Pr

Pb

Y

HDMI 2

AV 1

L L L L

L L

SPDIF

OUT

DVI AUDIO

IN

2.

3.

Insert the power cord fully into the TV power connector.

Connect the power cord plug to the power outlet. Ensuring that the cord is tightly secured at both ends.

To disconnect the TV from the power outlet

The TV set is always connected to the power. You can disconnect the TV from the power by doing one of the following tasks:

• Unplug the power cord located at the back of the TV.

• Unplug the power cord from the power socket outlet.

Pull the power cord by the plug - do not pull on the power cord.

3.5 Manage cables

Route your power cord, antenna cable and all other device cables through the cable holder at the back of the TV. This holder helps keep your cables tidy and easily manageable.

EN-8

3.6 Switch on and setup the TV

The TV switches on automatically after connecting the power cord.

Thank you for your purchase of this PHILIPS TV.

Please proceed with the following steps to set-up your TV. For the BESTpossible picture performance, contact your local

Cable / Satellite signal provider for High Definition signal options available in your area.

Next

Press the GREEN Next button located on your remote control to proceed.

Follow the on-screen instructions to select your language and complete your TV setup. Installation takes approximately 10 minutes.

D Note: If you connect your TV to a cable box or satellite set-top box, you do not need to install channels. Press the red button on the remote control to exit the channel installation stage of the setup.

Finish the setup by selecting your location:

• If you choose Retail store your settings will be are erased each time you turn off the TV. This mode is only to be used for retail store displays.

• If you choose Home you are guided through a choice of picture display options. Use the left and right cursor to select your preferred screen.

EN-9

4. Use your TV

This section helps you perform basic TV operations.

4.1 Switch your TV on/off or to standby

To switch the TV on

• Press . POWER at the right side of the TV.

4.2 Watch TV

Switch channels

1. Press a number (1 to 999) or press control.

CH+ or CH on your remote

For digital channels, press a number (1 to 999) followed by a dot

"." and then the corresponding sub channel number (1 to 999). Ex.

108.30.

2. Press PREV CH to return to the previously viewed TV channel.

POWER

To switch to standby

• Press . on the remote control.

To switch on from standby without the remote control

• Press . POWER at the right side of the TV to switch the TV off.

• Press . POWER again to switch the TV on.

D Note

You can also switch channels by pressing CHANNEL or + on the side controls of the TV.

Adjust volume

1. Press VOL+ or VOL on your remote control.

2. Press MUTE on your remote control to mute the sound.

Press MUTE again or press VOLUME or + to restore the sound.

To switch off

• Press . POWER at the right side of the TV.

D Note

Energy consumption contributes to air and water pollution. When the power cord is plugged in, your TV consumes energy. Your TV has a very low standby power consumption.

D Note: You can also adjust the volume by pressing VOLUME or + on the side controls of the TV.

To increase the headphone volume, press the volume button on the TV or remote control. When headphones are plugged into the TV, the loud speakers are automatically muted.

EN-10

4.3

1.

Watch channels from a set-top box

Switch on the set-top box.

The picture from your set-top box might appear automatically on your screen.

2. Use the remote control of your set-top box to select channels.

If the picture does not appear

1. Press SOURCE repeatedly to select the connected set-top box and wait a few seconds for the picture to appear.

2. Use the remote control of your set-top box to select channels.

4.4 Watch connected devices

1. Switch the connected device on.

The picture from your connected device might appear automatically on the TV.

If the picture does not appear

1. Press SOURCE repeatedly to select the connected device and wait a few seconds for the picture to appear.

4.5

1.

Watch a DVD

Insert a DVD disc in your player.

2. Press Play Æ on the remote control of your player.

The picture from the player might appear automatically on your screen.

If the picture does not appear

1. Press SOURCE repeatedly to select the DVD player and wait a few seconds for the picture to appear.

EN-11

5. Use more of your TV

This section describes the advanced features of your TV.

5.1 Understand the remote control

21

20

19

18

17

16

15

14

AMBILIGHT

ON/OFF MODE

1

2

3

4

5

6

7

8

9

10

11

12

13

1. .

Switches the TV on from standby or back to standby. The TV is never powered off completely unless it is physically unplugged.

2. SOURCE

Selects connected devices.

3. FAV

To display a list of all channels marked as favorite (including subchannels).

4.

5.

6.

7.

FORMAT

Selects a picture format. See Change picture format on page 14.

Color keys

Selects tasks.

OPTION

Activates the quick access menu. For information, see Use the quick access menu on the next page.

OK

To display the channel list or to activate a setting.

8.

9.

Cursor buttons Í Æ Î ï

To navigate through the menus.

INFO

Press to display information about the selected TV channel and program or accessory device. The quality and accuracy of the information on the information banner are transmitted from broadcasters. You may see a difference in broadcast time if the broadcaster is from a different time zone area.

10. + CH - Channel up/down

Switches to the next or previous channel.

11. MUTE

Mutes or restores sound.

12. Number keys 0-9

Selects a channel, page or setting.

13. ( . )

Press the dot (.) for digital channels.

14. PREV CH

Returns to the previously-viewed channel.

15. +VOL- Volume up/down

Increases or decreases volume.

16. MENU / EXIT

Toggles the menu on or off.

17. BACK

To return to the previous menu.

18. AUTO MODE

Toggles between preset picture and sound settings. For information, see Use Auto Mode on page 16.

19. DEMO

Toggles the demo menu on or off. For information, see Use the demo mode on page 25.

20. SLEEP

To set a delay after which the TV switches to standby. For information, see Set the sleeptimer on page 17.

21. AMBILIGHT

Switches Ambilight on or off and sets the mode. See Change

Ambilight settings on page 15.

EN-12

5.2 Use the quick access menu

The quick access menu gives direct access to some often needed menu items.

D Note

When digital channels are installed and broadcast, the relevant digital options are displayed in the quick access menu.

1. Press OPTION on the remote control.

3. Press ï and Æ to select the Picture menu.

TV menu

TV Settings

Settings assistant

Picture

Sound

Ambilight

Picture

Contrast

Brightness

Color

Tint

Sharpness

Color temperature

Dynamic contrast

HD Natural Motion*

*Available in selected models

4.

5.

6.

Press Î or ï to select one of the picture settings, and press Æ to enter the setting.

Press Î or ï to adjust the setting, and press Í or OK to confirm the change.

Press Menu to exit.

2. Press Î or ï and then OK to access one of the following menus:

• Audio language

For digital channels only, where multiple audio languages are broadcast.

• Closed captions

See View closed captions (subtitles) on page 21.

• Picture format

See Change picture format on the next page .

• Equalizer

See Change sound settings on page 15.

• Clock

See Set the clock on page 17 .

Change picture settings by using the setting assistant

This section guides you through a picture settings wizard.

1. Press MENU on the remote control.

5.3 Change picture and sound settings

Change picture settings

This section describes how to adjust your picture settings.

1. Press MENU on the remote control.

2. Press Æ to enter the Settings assistant menu.

TV menu Installation

TV settings

Settings assistant

Picture

Sound

Ambilight

Settings assistant

Start now

2. Press Æ to enter the TV settings menu.

TV menu

TV settings

Features

Installation

TV settings

Settings assistant

Picture

Sound

Ambilight

3. Press Æ to highlight Start now , and press OK to start the Settings assistant.

You are guided through a choice of picture display options. Press the color keys, cursor keys and OK to make your selections and store your setup.

EN-13

Summary of picture settings

The following picture settings can be configured. Depending on the format of the picture source, some picture settings might not be available.

• Contrast - Sets the level of white in the picture.

• Brightness - Sets the brightness of the picture.

• Color - Sets the level of saturation.

• Tint - Adjusts the color balance between red and green.

• Sharpness - Sets the sharpness of fine details.

• Color temperature - Sets the color temperature to normal, warm or cool.

• Dynamic contrast - Enhances contrast in the darker and the brighter picture areas as the image on the screen changes.

• HD Natural Motion (HDNM) - In selected TV models only.

Reduces field and line flicker to display movement smoothly. You can switch HDNM on or off.

• Digital Noise Reduction (DNR) - Automatically filters out and reduces image noise and improves picture quality when receiving weak video signals. You can switch DNR on or off.

• MPEG artifact reduction - Smooths transitions on digital pictures. You can switch MPEG artefact reduction on of off.

• Color enhancement - Makes colors more vivid and improves the resolution of details in bright colors. You can switch color enhancement on or off.

• Active control - Corrects incoming signals to provide the best picture possible according to lighting conditions in the room. You can switch Active Control to one of these settings: Off , On with light sensor or On without light sensor .

• Picture format - Changes the format of the picture.

• Horizontal shift - Adjusts the horizontal position of the picture.

• Vertical shift - Adjusts the vertical position of the picture.

Change picture format

1. Press FORMAT on the remote control.

Summary of picture formats

The following picture formats can be selected. Depending on the format of the picture source, some picture formats might not be available.

Automatic

(Not for PC mode.)

Enlarges the picture automatically to best fit the screen. The subtitles remain visible.

Super zoom

(Not for HD and PC mode.)

Removes the black bars on the side of

4:3 broadcasts. There is minimal distortion.

4:3

Shows the classic 4:3 format.

Movie expand 14:9

(Not for HD and PC mode.)

Scales classic 4:3 format to 14:9.

Movie expand 16:9

(Not for HD and PC mode.)

Scales the classic 4:3 format to 16:9.

Wide screen

Stretches the classic 4:3 format to 16:9

2. Press Î or ï to select a picture format and press OK to confirm your choice.

Unscaled (In selected TV models only)

(For HD and PC mode only)

Allows maximum sharpness. Some distortion may be present due to the broadcaster's systems. Set your PC resolution to widescreen mode for best results.

EN-14

Change sound settings

This section describes how to adjust your sound settings.

1. Press MENU on the remote control and select TV settings >

Sound .

TV menu

TV Settings

Settings assistant

Picture

Sound

Ambilight

Sound

Equalizer

Balance

Digital audio language

Alternate audio

Mono/Stereo

Incredible sound

AVL

BBE

2.

3.

4.

Press Î or ï to highlight a sound setting and press Æ to select the setting.

Press Î or ï to adjust the setting, and press OK to confirm the change.

Press Menu to exit.

5.4 Change Ambilight settings

This section describes how to adjust your Ambilight settings.

Turn Ambilight on/off

1.

2.

Press

Press

AMBILIGHT ON/OFF on the remote control.

AMBILIGHT MODE to toggle between Ambilight modes.

AMBILIGHT

ON/OFF MODE

AMBILIGHT

Summary of sound settings

The following sound settings can be configured. Depending on the sound source, some sound settings might not be available.

• Equalizer

Changes the bass and treble. Select a bar to change the setting.

• Balance

Sets the balance of the left and right speakers.

• Digital audio language

Available for digital channels only, when multiple languages are broadcast. Lists available audio languages.

• Alternate audio

Available for analog channels only when a main and second audio program (SAP) is available from the broadcaster. Select the main or second audio program.

• Mono/Stereo

Select mono or stereo.

• Incredible surround

Sets modes for spatial or surround sound reproduction depending on the broadcast signal or on signals from external input. Select on or off.

• Automatic volume leveling (AVL)

Reduces sudden volume changes, for example, during commercials or when switching from one channel to another. Select on or off.

• BBE

Restore clarity for better speech intelligibility and musical realism.

Select on or off.

• Delta volume

Levels out volume differences between channels or connected devices. Switch to the connected device as described in Watch connected devices on page 11 before changing the Delta volume.

Configure Ambilight

1. Press MENU

Ambilight .

on the remote control and select TV settings >

2.

3.

4.

TV menu

TV Settings

Settings assistant

Picture

Sound

Ambilight

Ambilight

Ambilight

Brightness

Mode

Color

Custom color

Balance

Press Î or ï to highlight a setting and press Æ to select the setting.

Press Î or ï to adjust the setting, and press OK to confirm the change.

Press Menu to exit.

Summary of Ambilight settings

• Ambilight

Switches Ambilight on or off.

• Brightness

Changes the light output of Ambilight.

• Mode

Choose from four Ambilight modes.

• Color

Selects a predefined color setting or allows you to make a custom color.

Custom color

Allows you to customize a color. Select Saturation first and set the value high. Then select Palette and choose a value from 0 to

100.

• Balance

Sets the level of Ambilight on the left and right side of the TV.

EN-15

5.5 Use Auto Mode

1. Press Auto Mode to set your TV to a predefined picture and sound setting.

5.6 Create and use lists of favorite channels

This section describes how to create and use lists of your favorite channels.

Select a list of favorite channels

1. Press the FAV key on the remote control.

2.

Press Î or ï to select one of the following settings:

Personal

The customized settings you defined by using the Picture menu.

Sports

Vivid picture settings and clear sound for high action.

Standard

For normal TV viewing.

Movie

Brilliant picture settings for a cinematic experience.

Game

Optimized for PCs, games consoles and playstations.

Power saver

Eco friendly settings for lower power consumption.

2.

Your lists of favorite channels are displayed.

Press Î or ï to highlight a list, and press OK to select the list.

4.

5.

2.

3.

Create or edit a list of favorite channels

1. Press the FAV key on the remote control to display your lists of favorite channels.

Press Î or ï to highlight a list, and press

Press the green key to enter

A list of channels is shown.

Edit mode.

Press Î or ï to highlight a channel.

OK to select the list.

6.

Press OK to select or deselect the highlighted channel.

The channel is added to or removed from the list of favorite channels.

Press the green key to exit.

2.

3.

Switch to one of the channels on a list

1. Press the OK you selected.

key on the remote control to display the last list that

Press

Press

Î or ï to highlight a channel.

OK select the channel.

The TV switches to that channel.

EN-16

5.7 Set the clock

This section describes how set the time, date, time zone, and daylight saving.

Set the time automatically

Some digital channels transmit the time. For these channels, you can set the time automatically. Follow these steps to set the time automatically and to choose which channel to read the time from.

1. Press MENU on the remote control and select

Clock > Auto clock mode .

Installation >

2. Select Automatic , and press Í to confirm your choice.

Set the time manually

1. Press MENU on the remote control and select

Clock > Auto clock mode .

Installation >

2. Press Î or ï to select Manual , and press Í to confirm your choice.

TV menu I Installation

Clock

Auto clock mode

Time

Day

Auto clock mode

Manual

Automatic

TV menu I Installation

Clock

Auto clock mode

Auto clock channel

Time zone

Daylight saving

Auto clock mode

Manual

Automatic 3.

6.

7.

4.

5.

8.

Press ï to select Time and then press Æ to set the time.

Use the format HH:MM. Select AM/PM for morning or afternoon.

Press OK to confirm your choice.

Press ï and Æ to enter the menu for Day .

Press Î or ï to select the day.

Press OK to confirm your choice.

Press MENU to exit.

3.

4.

5.

6.

(Optional) Select the channel from which the TV will read the time.

• Press ï and Æ to enter the menu for Auto clock channel .

• Press Î or ï to highlight a channel.

• Press Í to confirm your choice.

(Optional) Select the time zone.

• Press ï and Æ to enter the menu for Time zone .

• Press Î or ï to highlight the time zone.

• Press Í to confirm your choice.

(Optional) Set daylight saving.

• Press ï and Æ to enter the menu for Daylight saving .

• Press Î or ï to highlight Automatic or Off.

• Press Í to confirm your choice.

Press MENU to exit.

5.8 Set the sleeptimer

This section describes how to program the TV to switch off automatically after a delay.

1. Press MENU

Sleeptimer .

on the remote control and select Features >

TV menu

Features

Caption settings

Sleeptimer

Child lock

Change PIN

Demo

Sleeptimer

90 min

2.

3.

Press Î or ï to select a value from 0 to 180 minutes.

For example, when you select 90 , the TV switches to standby in 90 minutes.

Press MENU to exit.

E Tip

To turn the sleeptimer off, select 0 minutes.

EN-17

5.9 Use child control and rating locks

This section describes how to lock or unlock the TV. You can set a personal identification number (PIN) and prevent your children from watching certain programs or certain channels.

Set or change your PIN

1. Press MENU

Change PIN .

on the remote control and select Features >

2. Enter a 4-digit PIN with the number keys on the remote control.

3.

4.

• If you have a PIN, enter your current PIN.

• If you do not have a PIN or if you have lost your PIN, enter

0711 .

Enter your new 4-digit PIN and then enter it again to confirm.

A message appears to confirm that your PIN has been changed.

Press MENU to exit.

Lock a channel

This section describes how to lock specified channels. The channels can be selected but the screen is blanked out and the audio is muted.

1. Press MENU on the remote control and select lock > Channel lock .

Features > Child

2. Enter your PIN.

If you do not have a PIN, set one as described in Set or change your

PIN on this page.

TV menu Features

Child Lock

Lock after

Channel lock

TV ratings lock

Movie ratings lock

Canada English ratings lock

Canada French ratings lock

Region ratings lock

Channel lock

Channel 1

Channel 2

Channel 3

Channel 4

Channel 5

Channel 6

Channel 7

Sport

News

Movies

L ock the TV

This section describes how to lock all channels on the TV. At the specified time, screen is blanked out and the audio is muted.

1. Ensure that the clock is set with the current time. For information about how to set the clock, see Set the clock on the previous page.

2. Press MENU on the remote control and select Features > Child lock > Lock after .

3.

4.

Enter your PIN.

If you do not have a PIN, set one as described in Set or change your

PIN on this page.

Press Æ to select Timer .

3.

4.

Press Î or ï and then press OK to lock one or more channels or external sources.

Each channel has a box-graphic in front of it to indicate whether it is locked:

• A box with X indicates that the channel is locked

• An empty box indicates that the channel is not locked

Press MENU to exit.

TV menu Features

Lock after

Child lock

Timer

Time

Timer

Off

On

6.

7.

5. Press ï to select On and activate the Lock after feature.

Selecting Off deactivates the feature.

Press Í to confirm your choice.

Press ï to select Time and then press Æ to set the time.

Use the format HH:MM. Select AM/PM for morning or afternoon.

8.

9.

Press

Press

OK to confirm the time.

MENU to exit.

10. Please restart your TV to activate this function.

EN-18

Use the TV ratings lock

Your TV is equipped with a V-chip that allows you to control access to individual programs based on their age rating and content rating. The program content advisory data are sent by the broadcaster or by the program provider.

If you are receiving channels through a set-top box or cable box connected by HDMI, you cannot use the TV ratings lock. Your set-top box or cable box must be connected through RF or AV connectors.

1. Press MENU on the remote control and select lock > TV ratings lock .

Features > Child

2. Enter your PIN.

If you do not have a PIN, set one as described in Set or change your

PIN on the previous page.

3. Press Î or ï and then press OK to lock or unlock one or more ratings.

Each rating has a box-graphic in front of it to indicate whether programs carrying that rating are currently locked:

• A box with X indicates that all items in the content ratings list are locked.

• An empty box indicates that the item is not selected.

• A box with / indicates that some content ratings are deselected.

For example, for rating TV-14, you can deselect one or more of the following content ratings: Dialog (D), Language (L), Sex (S), or

Violence (V).

Summary of TV ratings

Age rating

All

None

TV-Y

Appropriate for children of all ages with themes and elements suitable for children aged 2-6.

TV-Y7

Programs designed for children age 7 and older.

TV-G

Programs suitable for all ages. These programs contain little or no violence, no strong language and little or no sexual dialog or situations.

TV-PG

Programs contain elements that some parents may find unsuitable for younger children and which may need parental guidance. The program may contain moderate violence, sexual dialog and/or situations and some strong language.

TV-14

Programs contain elements that may not be suitable for children under 14 years of age. These programs include one or more of the following: intense violence, intense sexual situations, suggestive dialog and strong language.

TV-MA

Programs are designed to be viewed by adults and may be unsuitable for children under the age of 17.

These programs may contain graphical violence, explicit sexual activity and/or crude or indecent language.

Content rating

None

None

None

Fantasy Violence (FV)

None

Dialog (D)

Language (L)

Sex (S)

Violence (V)

Dialog (D)

Language (L)

Sex (S)

Violence (V)

Language (L)

Sex (S)

Violence (V) TV menu Features Child Lock

TV ratings lock

All

None

TV-Y

TV-Y7

TV-G

TV-PG

TV14

TV-MA

TV-14

(D)Dialog

(L)Language

(S)Sex

(V)Violence

4.

• When you select All , all items in the ratings list are locked.

• When you select None , programs with no rating and programs with a rating of None are locked.

• When you lock a rating, all ratings in the younger age categories are automatically locked.

Press MENU to exit.

EN-19

Use the movie ratings lock

This section describes how to control viewing of movies based on their

Motion Picture Association of America (MPAA) rating.

1. Press lock .

MENU on the remote control and select Features > Child

2. Select one of the menus for movie ratings lock.

3.

• In the USA, select Movie ratings lock .

• In Canada, select Canada English ratings lock or Canada

French ratings lock .

Enter your PIN.

If you do not have a PIN, set one as described in Set or change your

PIN on page 18.

The following screen shows the ratings in Movie ratings lock .

Summary of US movie ratings

Movie rating

All

NR

G

PG

PG -13

R

NC-17

X

Description

All items in the ratings list are locked.

Not rated.

Movies with a mild content, suitable for all ages.

Movies for which parental guidance is recommended. They may contain a few racy or violent scenes or maybe some bad language.

Movies for which parental guidance may be recommended if under age 13.

Restricted. The movies usually contain offensive sex or bad language and may be unsuitable for children under the age of 17. Parental guidance or permission needed.

Even with parental permission, forbidden under age 17.

More offensive sex, violence or bad language.

Movies which generally focus on sex, violence and/or bad language. Also known as pornography.

4.

5.

TV menu Features

Child Lock

Lock after

Channel lock

TV ratings lock

Movie ratings lock

Canada English ratings lock

Canada French ratings lock

Region ratings lock

Movie ratings lock

All

NR

G

PG

PG-13

R

NC-17

X

Press Î or ï and then press OK to lock or unlock one or more movie ratings.

Each rating has a box-graphic in front of it to indicate whether it is locked:

• A box with X indicates that the rating is locked

• An empty box indicates that the rating is not locked

When you lock a movie rating, all items for ages below that movie rating are automatically locked.

Press MENU to exit.

Summary of Canadian movie ratings

Movie rating

All

C

C8+

G

PG

14+

18+

Description

All items in the ratings list are locked.

Programming suitable for children under the age of 8 years. No profanity or sexual content of any level allowed.

Minimal comedic violence.

Suitable for children ages 8 and over. Low intensity violence and fantasy horror allowed.

Movies with a mild content, suitable for all ages.

Movies for which parental guidance is recommended. They may contain a few racy or violent scenes or maybe some bad language.

Programming intended for children ages 14 and over. May contain intense scenes of violence, strong profanity, and depictions of sexual activity within the context of a story.

Programming intended for viewers ages 18 and over. May contain strong violence, language, and sexual activity.

Summary of Canadian French movie ratings

Movie rating

All

G

8 ans+

13 ans+

16 ans+

18 ans+

Description

All items in the ratings list are locked.

Appropriate for all ages with little or no violence and little to no sexual content.

Appropriate for children 8 and up which may contain little violence, some foul language and/or little to no sexual content.

Appropriate for children 13 and up, with moderate violence, language, and some sexual situations. Persons under 13 should be accompanied by an adult.

Appropriate for children 16 and up, with strong violence, strong language, and strong sexual content.

Only to be viewed by adults and contains extreme violence and graphic sexual content/pornography.

EN-20

Use the region ratings lock

This section describes how to control access to digital programs based on downloaded region ratings.

Before you download a ratings table, ensure that regional ratings are broadcast.

1. Press MENU on the remote control and select

Preferences > Downloaded rating table .

Installation >

TV menu Installation

Preferences

Location

Show emergency alerts

Downloaded rating table

Downloaded rating table

Off

On

2.

3.

Press Î or ï to select On , and press Í to confirm your choice.

If you select Off , you choose not to download the region rating table and you cannot use the region rating lock.

Press Í to return to the TV menu and select Features > Child lock > Region ratings lock .

TV menu Features

Child Lock

Lock after

Channel lock

TV ratings lock

Movie ratings lock

Canada English ratings lock

Canada French ratings lock

Region ratings lock

Region ratings lock

Please enter your PIN

5.10 View closed captions (subtitles)

The caption service displays transmitted CC-, T-, and CS- text. The caption text can be displayed permanently or only when the TV is muted. This section describes how to use the caption service.

D Note

• This television provides a display of television closed captioning that conforms with the EIA-608 standard and in accordance with

Sections 15.119 of the FCC rules.

• If you connect your set-top box via HDMI or component video input, you cannot select closed caption through the TV. You can select closed caption through the set-top box only.

• The captions do not always use correct spelling and grammar.

• Not all TV programs and product commercials include closed caption information. Refer to your area TV program listings for the TV channels and times of closed caption shows. The captioned programs are usually noted in the TV listings with service marks such as ‘CC’.

Display captions

1. Press MENU on the remote control and select

Caption settings > Closed captions .

Features >

2.

3.

Press Î or ï to select to confirm your choice.

Press MENU to exit.

On, Off or On during mute , and press Í

4.

5.

6.

Enter your PIN.

If you do not have a PIN, set one as described in Set or change your

PIN on page 18.

Press Î or ï and then press OK to lock or unlock one or more ratings.

Each rating has a box-graphic in front of it to indicate whether it is locked:

• A box with X indicates that the rating is locked

• An empty box indicates that the rating is not locked

Press MENU to exit.

Select caption services

For information about the caption services see Summary of caption services on the next page.

1. Turn captions on as described in Display captions on this page.

2. Select a caption service for analog channels:

3.

• Press MENU on the remote control and select Features >

Caption settings > Caption service .

• Press Î or ï to select one of the listed caption services and press Í to confirm your choice.

Not all caption services are necessarily being used by a TV channel during the transmission of a closed caption program.

Select a caption service for digital channels:

• Press ï and Æ to enter the menu for Digital caption service .

4.

• Press Î or ï to select one of the listed caption services, and press Í to confirm your choice.

Press MENU to exit.

EN-21

Summary of caption services

• CC-1, CC-2, CC-3, and CC-4

Dialog and descriptions for the action on the captioned TV program show on screen. Usually CC 1 is the most used. CC 2 can be used for alternate languages if they are being transmitted.

• T-1, T-2, T-3 and T-4

Often used for channel guide, schedules, bulletin board information for Closed Captions programs, news, weather information, or stock market reports.

• CS-1, CS-2, CS-3, CS-4, CS-5 and CS-6

Service 1 is designated as the Primary Caption Service. This service contains verbatim, or near-verbatim captions for the primary language being spoken in the accompanying program audio.

Service 2 is designated as the Secondary Language Service. This service contains captions in a secondary language which are translations of the captions in the Primary Caption Service. The other service subchannels are not pre-assigned. It is up to the discretion of the individual caption provider to utilize the remaining service channels.

5.11 View photos and play music on a USB device

Your TV is fitted with a USB connection that enables you to view photos or listen to music stored on a USB device. You can view your pictures as a slideshow or listen to a music playlist.

For information about using a USB device, see Notes for the use of USB devices on page 36.

The following formats are supported:

• For pictures: JPEG

For audio: MP3

FAT/DOS-formatted memory devices

The following formats are NOT supported

• Progressive JPEG files

Files with names exceeding 128 characters

Files with names containing a dot character

Choose how digital captions are displayed

You can define the size, font, color, background and other characteristics of the caption text.

1. Press MENU on the remote control and select

Caption settings > Digital caption options .

Features >

2.

3.

4.

Press Î or ï to highlight an option for digital captions, and press Æ to select the option.

Press Î or ï to highlight a setting for the option, and press Í to confirm your choice.

Press MENU to exit.

D Note

• Philips can not be held responsible if your USB device is not supported, nor will Philips accept any liability for damage or loss of stored data.

• The USB device is not supplied with the TV.

Insert a USB device

1. While your TV is on, connect your USB device to the USB port on the side of your TV. The main menu appears automatically and the name of the USB device is highlighted next to Multimedia .

TV menu

TV settings

Features

Installation

Multimedia

Multimedia

MyUSB

Remove a USB device

B Caution

To avoid damaging the USB device always exit the on-screen menu and wait five seconds before you remove the USB device.

1. Press Menu to exit the on-screen menu.

2. Wait five seconds then remove the USB device.

EN-22

View your pictures on a USB device

1. After connecting your USB device to the TV, press

Multimedia menu. Picture is highlighted.

Æ to enter the

MyUSB

Picture

Music

Picture

Image1.JPG

Image2.JPG

Folder 1

Folder 2

Thumbnails

You can configure the following features of the slideshow:

• Details / More details

Displays the picture name, date, size, and next picture in the slideshow.

Transitions

Displays the list of available transition styles of the pictures.

Slide time

Sets the time lag for picture transitions.

Rotate

Rotates a picture.

Zoom

Displays a list of available zoom magnifications.

Start show/Stop show

Starts or stops a slide show.

2.

3.

Press Æ to enter the Picture folder.

Press Î or ï to select a picture or a picture album on the USB device.

The pictures appear in a list or as thumbnails. Press the green key to toggle between List and Thumbnails .

Devicelabel1 Picture Folder 1

Folder 1

IMAGE1.JPG

IMAGE2.JPG

IMAGE2.JPG

IMAGE1.JPG

Listen to music on a USB device

1. After connecting your USB storage device to the TV, press enter the Multimedia menu.

Æ to

2. Select Music then press Æ to enter the Music folder.

Devicelabel1 Music

Music

Track1.MP3

Track2.MP3

Track3.MP3

Track1.MP3

Title: Track 1

Artist:

Album: Sentiment...

Duration: 00:02:53

Year:

IMAGE1.JPG

640:480

Date Time

Thumbnails

Devicelabel1 Picture Folder 1

Folder 1 IMAGE1.JPG

IMAGE1.JPG

3.

4.

Press Î or ï to select a song or a music album.

• Press the color keys on the remote control to repeat, shuffle or change the settings of the album.

• Press OK to pause, press OK again to restart.

• If the color keys disappear from the screen, press OK to make them reappear.

Press Í to select another song or album.

List

4.

5.

Press OK to view the picture or to start a slide show of the pictures in the album.

Press the color keys on the remote control to perform the function shown at the bottom of the screen.

If the function bar at the bottom disappears, press any color key to make it reappear.

Press Í and select another picture or another album.

Accompany a slideshow with music

You can accompany a slideshow with background music. The audio continues to be played even if the slideshow is stopped. The audio stops when another song is played, or when the end of the music album is reached.

1. Select a music album as described in on this page.

Listen to music on a USB device

2. Start a slideshow as described in View your pictures on a USB device on this page.

EN-23

5.12 Use your TV in HDTV mode

Not all models can be configured in HDTV mode. For information about your set, see the specification.

When you connect a high definition (HD) device to your TV, you must configure the display format of your TV. You might also have to configure the display format of your HD device. For information about configuring your device, see the documentation of the device.

5.13 Use your TV as a PC monitor

For information how to connect a PC to your TV see Connect a PC on page 33. Use an HDMI-DVI cable or an HDMI-DVI adaptor. For sound, add an audio cable with a stereo mini jack.

B Caution

Before you connect your PC, set the PC monitor refresh rate to 60Hz.

Supported video formats

The following video formats are supported in HDTV mode:

Resolution

640 x 480p

720 (1440) x 480i

720 (1440) x 576i

720 x 480p

720 x 576p

1280 x 720p

1920 x 1080i

1920 x 1080p*

Refresh rate

60Hz

60Hz

50Hz

60Hz

50Hz

50Hz, 60Hz

50Hz, 60Hz

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

*1080p is supported in selected models only

D Note

Your TV is HDMI compliant. If you do not get a good picture, change the video format on your connected devices.

Supported screen resolutions

The following screen resolutions are supported in PC mode:

Resolution

640 x 480

800 x 600

1024 x 768

1280 x 768

1280 x 1024

1360 x 768

1920 x 1080*

Refresh rate

60Hz

60Hz

60Hz

60Hz

60Hz

60Hz

60Hz

*1080p is supported in selected models only

If necessary, you can adjust the picture position to the center of the screen with the cursor buttons.

Configure your TV in HDTV mode

1. Connect the HD device to your TV as described in devices on page 31 .

Connect your

2. Press MENU on the remote control and select Features > Mode

Selection .

TV menu

Features

Mode Selection

Caption settings

Sleeptimer

Child Lock

Change PIN

Demo

Mode Selection

PC

HDTV

Configure your TV in PC mode

1. Connect the PC to your TV as described in

33 .

Connect a PC on page

2. Press MENU on the remote control and select Features > Mode

Selection .

TV menu

Features

Mode Selection

Caption settings

Sleeptimer

Child Lock

Change PIN

Demo

Mode Selection

PC

HDTV

3.

4.

Select PC and press OK to confirm your choice.

If necessary, adjust the picture settings as described in Change picture settings on page 13 .

3.

4.

5.

Select HDTV and press Í to confirm your choice.

If necessary, adjust the TV picture settings as described in Change picture and sound settings on page 13.

Press MENU to exit.

E

5.

Tip : Set the picture format to Unscaled when using wide-screen PC resolutions.

Press MENU to exit.

D Note

Mode Selection item only appears for the following input signals:

- 720x480p@60 Hz

- 1280x720p@60 Hz

- 1920x1080p@24/25/30/50/60 Hz

D Note

Mode Selection item only appears for the following input signals:

- 720x480p@60 Hz

- 1280x720p@60 Hz

- 1920x1080p@24/25/30/50/60 Hz

EN-24

5.14 Use Philips EasyLink

Your TV supports Philips EasyLink, which enables one-touch play and one-touch standby between EasyLink-compliant devices. Compliant devices must be connected to your TV via an HDMI connector.

One-touch play

When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control. For example, when you press Play on your DVD remote control, your

Philips TV will automatically switch to the correct channel to show the

DVD content.

One-touch standby

When you connect your TV to devices that support standby, you can use your TV remote control to put your TV and all connected HDMI devices in standby mode. You can perform one-touch standby using the remote control from any of the connected HDMI devices.

5.15 Use the demo mode

The demo mode enables you to demonstrate and learn about some of the features of your TV.

Some demos are not available on certain models. When a demo is available, you see it in the menu list.

1. Press MENU

Demo . on the remote control and select Features >

TV menu

Features

Caption settings

Sleeptimer

Child lock

Change PIN

Demo

Demo

Ambilight

120Hz*

Pixel Plus

HDNM*

Power Usage

* Available in selected models only

2.

3.

4.

Press Î or ï to highlight a demo, and press OK to start the demo.

Follow the on-screen instructions to enjoy the demo.

Press MENU to exit.

EN-25

6. Change your TV installation

The first time you switch on your TV you select the language for the TV menus and make basic choices for picture and sound settings. Use this chapter to reinstall the TV, to set preferences in the TV menus, or to tune new TV channels.

6.1 Select your menu language

1. Press MENU on the remote control and select Installation >

Language .

3.

If you have forgotten your PIN, reset it as described in Set or change your PIN on page 18.

Select Cable or Antenna and press OK .

• When Antenna is selected, the TV detects antenna signals. It searches for NTSC and ATSC channels available in your area.

• When Cable is selected, the TV detects signals supplied by cable.

It searches for NTSC, ATSC, and QAM modulated channels available in your area.

TV installation

TV menu

Installation

Language

Channels

Preferences

Source labels

Clock

Current software info

Reset AV settings

Language

English

Francais

Espanol

System searching. Please wait...

Analog channels found: 0

Digital channels found: 0

2.

3.

Select a language and press OK to confirm your choice.

Press Í to return to the Installation menu.

4.

When autoprogramming is complete, this message appears

" Channel search completed ".

Follow the on-screen instructions to complete the installation.

6.2 Set your location to home

2.

3.

You can set the location of your TV to Home or Retail store .

Choosing Home gives you full flexibility to change predefined settings for picture and sound.

1. Press MENU on the remote control and select

Preferences > Location .

Installation >

Select

Press

Home

Í

and press

to return to the

OK to confirm your choice.

Installation menu.

6.3 Tune channels automatically

This section describes how to search for and store channels automatically. Before you tune channels, ensure that you are registered with your cable TV provider and that your equipment is correctly connected.

1. Press MENU on the remote control and select

Channels > Autoprogram > Start Now .

Installation >

TV menu Installation

Channels

Autoprogram

Weak channel installation

Installation mode

Uninstall channels

Autoprogram

Start Now

6.4 Optimize the signal quality from your antenna

5.

6.

2.

3.

You can optimize your signal quality by tuning in ATSC channels with weak signals, and adjusting the antenna.

1. Press MENU on the remote control and select

Channels > Installation mode.

Installation >

Select Antenna and press Í to confirm your choice.

4.

Press Î and Æ to enter Weak channel installation .

Highlight a channel from the list of TV channels and press the green color button on the remote control.

The signal strength for the channel is displayed.

Adjust your antenna to maximize the signal strength.

Press MENU to exit.

2. Press OK to start the installation.

If you run Autoprogram when you have locked channels, a message appears asking to enter your PIN code. Enter your PIN code in order to complete the installation.

EN-26

6.5 Uninstall and reinstall channels

This section describes how to uninstall and reinstall a stored channel.

When a channel is uninstalled it is removed from the list of channels.

Uninstalled channels are not reinstalled during an installation update.

1. Press MENU on the remote control and select

Channels > Uninstall channels .

Installation >

TV menu Installation

Channels

Autoprogram

Weak channel installation

Installation mode

Uninstall channels 55

56

57

58

59

Uninstall channels

52

53

54

2.

3.

4.

Press Æ to enter the list of stored channels.

Press Î or ï to select the channel you want to uninstall, and press the green key on the remote control.

The channel is removed from the channel list. Press the green key again to reinstall the channel.

Press MENU to exit.

6.7 Show emergency alerts (EAS)

The SCTE18 standard defines an emergency alert signalling method for use by cable TV systems. EAS can be broadcast to digital devices such as digital set-top boxes, digital TVs, and digital VCRs.

The EAS scheme allows a cable operator to disseminate information related to state and local emergencies and warnings.

EAS contain the following information:

• Emergency alert text

Start time and date

End time and date

Priority

EAS with priority Maximum or High are always displayed on your TV.

However, you can configure your TV to not show EAS messages with

Medium or Low priority.

EAS is not possible with a multimedia browser or with analog video sources.

You can always remove the message from the screen. The message display overlaps menus and other messages on the screen.

Configure emergency alerts

1. Press MENU on the remote control and select

Preferences > Show emergency alerts .

Installation >

6.6 Return your settings to default values

This section describes how to return picture and sound settings to their default values. The channel installation settings are not affected.

1. Press MENU on the remote control and select

Reset AV settings .

Installation >

TV menu Installation

Preferences

Location

Show emergency alerts

Downloaded rating table

Show emergency alerts

Always

Skip low priority

Skip medium/low priority

TV menu

Installation

Language

Channels

Preferences

Source labels

Clock

Current software info

Reset AV settings

Reset AV settings

Start now

2.

3.

Press Æ to highlight Start now , and press OK to reset the AV settings.

Press Menu to exit.

2.

3.

4.

Highlight one of the following options:

• Always

To display all emergency alert messages

• Skip low priority

To show all messages except low priority messages

• Skip medium/low priority

To show maximum and high priority messages only

Press Í to confirm your choice.

Press MENU to exit.

EN-27

7. Update your TV software

Philips continuously tries to improve its products and we strongly recommend that you update the TV software when updates are available.

New software can be obtained from your dealer or downloaded from the www.philips.com/welcome website. Use the type number of your TV (e.g. 42PFL5603D/27) to find information.

For information about using a USB device, see Notes for the use of USB devices on page 36.

7.1 Check your current software version

1. Press MENU on the remote control and select Installation >

Current software info .

TV menu

Installation

Language

Channels

Preferences

Source labels

Clock

Current software info

Reset AV settings

Release version: xxxxx

Download the software

1. On your PC, open a web browser and go to welcome .

www.philips.com/

2.

3.

Find information and software related to your TV and download the latest software upgrade file to your PC.

Decompress the ZIP-file and copy the “ autorun.upg

” file to the root directory of your the USB device.

7.3

1.

Upgrade software

Prepare the software upgrade as described above.

2.

3.

Connect your USB device to the USB port on the side of your TV.

The TV scans the USB device for the updated software and automatically enters the upgrade mode.

Read the instructions on-screen and confirm that you want to continue with the installation.

You see a screen similar to this.

Software Upgrade Application

Upgrade busy...

Software Id:

Programming

<Old-Software> - <New-Software>

The version and a description of the current software is displayed.

7.2 Prepare for the software upgrade

You require the following equipment:

• A PC with web browsing capability.

An archive utility that supports the ZIP-format (e.g. WinZip for

Windows or StuffIt for Mac OS).

A USB memory stick.

D Note:

• Only FAT/DOS-formatted portable memory is supported.

• New software can be obtained from your dealer or can be downloaded from the www.philips.com/welcome website.

• Use only software upgrades that can be found on the Philips web site.

B Warning:

• Do not remove the USB device during the software upgrade.

• If there is a power drop during the upgrade, do not remove the

USB device from the TV. The TV will continue the upgrade as soon as the power comes back.

• If you try to upgrade to a software version lower than the current version, a confirmation message will be displayed. Downgrading to older software should be done only in case of real necessity.

• If an error occurs during the upgrade, retry the procedure or contact your dealer.

6.

7.

4.

5.

When the software upgrade is complete, remove the USB device.

Disconnect the TV from the power socket outlet.

Reconnect the TV to the power socket outlet.

Press Power

.

at the side of the TV to switch the TV on.

The TV starts up with the new software.

EN-28

8. Connect devices

8.1 Connection overview

11

HDMI 1

1

TV ANTENNA

2 3 4 5

R

L

Pr

R

L

Pr

R

L

SERV. U

SPDIF

OUT

HDMI 2

Pb

Y

AV 1

Pb

Y

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

7

6

10 9 8

R

L

AUDIO

VIDEO

S-VIDEO

HDMI 4

USB

12

13

14

15

16

1.

2.

3.

4.

Antenna input

AV1

Component video input. Y Pb Pr and Audio L/R connectors for

DVD, digital receiver or game console, etc.

AV2

Second component video input.

AV3

Composite video input to be used together with Audio L/R connectors for camcorder, game console, etc.

7.

8.

5. Service UART

For use only by authorized service personnel.

6. SPDIF Out

Digital audio out.

DVI Audio IN for HDMI 3.

HDMI 3 In

HDMI in connector for Blu-ray Disc player, HD digital receiver or

HD game console, etc.

9. S-Video (AV3)

S-Video input connector to be used together with Audio L/R connectors for camcorder, game console, etc.

D Note: When you use the S-Video (AV3) for video signals, do not use the composite video input on AV3 for video signals.

10. HDMI 2 In

Second HDMI in connector.

11. HDMI 1 In

First HDMI in connector.

12. Headphones

Stereo Mini Jack.

13. Video (Side)

Video input cinch connector to be used together with Audio L/R connectors for camcorder, game console, etc.

14. S-Video (Side)

S-Video input connector to be used together with Audio L/R connectors for camcorder, game console, etc.

D Note: When you use the S-Video (side) for video signals, do not use the video (side) input for video signals.

15. HDMI 4 In (Side)

HDMI in connector for Blu-ray Disc player, HD digital receiver or

HD game console, etc.

16. USB

USB connector.

EN-29

8.2 Select your connection quality

This section describes how you can enhance your audio visual experience by connecting your devices with the best possible connectors.

HDMI - Highest quality

S-Video - Good quality

An analog connection, S-Video provides better picture quality than composite video. When connecting your device with S-Video, plug the

S-Video cable to the S-Video connector on the side of the TV. You must connect a separate Audio L/R cable from the device to the red and white Audio L/R in/out connectors on the side of the TV.

HDMI produces the best audio visual quality possible. Both audio and video signals are combined in one HDMI cable, providing an uncompressed, digital interface between your TV and HDMI devices.

You must use HDMI to experience full high definition video. You must also use HDMI cables to use Philips EasyLink as described in Use Philips

EasyLink on page 25 .

Use only a certified HDMI cable.

E Tip

If your device only has a DVI connector, use a DVI-HDMI adaptor to connect your device to a HDMI connector on the TV. As such a connection does not support sound, you must connect a separate audio cable from the device to the Audio L/R input connectors on the TV.

D Note

Philips HDMI supports High-bandwidth Digital Contents Protection

(HDCP). HDCP is a form of Digital Rights Management that protects high definition content in DVD or Blu-ray discs.

Component (YPbPr) - High quality

Component (Y Pb Pr) video provides better picture quality than

S-Video or composite video connections. Though component video supports high definition signals, picture quality is lower than HDMI and is analog.

When connecting a component video cable, match the cable colors to the connectors on the back of the TV. Also, connect an Audio L/R cable to the red and white Audio L/R input connectors.

Composite audio/video cable

- Yellow, red and white

Component video cable

- Red, Green, Blue

Audio L/R cable

- Red, White

S-Video cable

Composite - Basic quality

Audio L/R cable

- Red, White

Composite video provides basic analog connectivity, usually combining a (yellow) video cinch cable with (red and white) Audio L/R cinch cable.

Match the cable colors when connecting to the composite video and audio L/R input connectors on the side of the TV.

8.3 Label your connections

When you connect devices, you can label the connections to help you to later identify where devices are connected.

1. Press MENU on the remote control and select

Source Labels .

Installation >

TV menu

Installation

Language

Channels

Preferences

Source labels

Clock

Reset AV settings

Software upgrade

Source labels

AV1

AV2

AV3

HDMI1

HDMI2

HDMI3

Side HDMI

Side AV

5.

6.

2.

3.

4.

Press Æ to enter the list of available connections.

Press Î or ï to highlight a connection in the list.

Press Æ to enter the list of devices for the connection, and press Î or ï to highlight a device.

Press Í to confirm your choice.

Press MENU to exit.

EN-30

8.4 Connect your devices

This section describes how to connect a selection of devices with different connectors. Note that different types of connectors may be used to connect a device to your TV. The following sections describe examples only, other configurations are possible.

When connecting composite or component cables, match the cable colors to the connectors on the TV.

Connect a set-top box and a DVD player/recorder via composite connectors

B Warning

Do not place your recorder too close to the screen because some recorders can be susceptible to signals.

Connect a set-top box, DVD player/recorder and game console via HDMI

TV ANTENNA

HDMI 1

R

L

Pr

R

L

Pr

R

L

SERV. U

SPDIF

OUT

HDMI 2

Pb

Y

AV 1

Pb

Y

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

HDMI 1

TV ANTENNA

Or/Ou/O RF OUT

R

L

Pr

R

L

Pr

R

L

SERV. U

SPDIF

OUT

HDMI 2

Pb

Y

AV 1

Pb

Y

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

L + R + VIDEO

OUT

RECORDER

IN

Set-top box

OUT

RF IN

Connect a DVD player/recorder via HDMI-DVI and DIGITAL

AUDIO OUT connectors

TV ANTENNA

R R R

SERV. U

L

Pr

L

Pr

L

SPDIF

OUT

HDMI 2

Pb

Y

AV 1

Pb

Y

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

AUDIO

IN

Connect a DVD recorder or VCR and a second A/V device via composite connectors HDMI 1

AUDIO

OUT

DVI

HDMI

Or/Ou/O RF OUT

L + R + VIDEO

HDMI 1

R

L

Pr

R

L

Pr

R

L

SERV. U

SPDIF

OUT

HDMI 2

Pb

Y

AV 1

Pb

Y

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

R

L

AUDIO

VIDEO

S-VIDEO

HDMI 4

USB

OUT

RECORDER

OUT

L + R + VIDEO

RF IN

RF OUT

RF IN

CABLE

Connect a DVD player via S-Video and audio connectors

TV ANTENNA

R

L

Pr

R

L

Pr

R

L

SERV. U

SPDIF

OUT

HDMI 2

Pb

Y

AV 1

Pb

Y

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

R

L

AUDIO

AUDIO L/R

VIDEO

S-VIDEO

HDMI 4

If your recorder has an S-VHS video jack: for improved picture quality, connect an S-Video cable with the S-Video input and connect the audio cables to the audio L and R input jacks of AV3/side AV.

D Note

When you use an S-Video connector, do not connect any device to the

AV3/side AV video jack.

If you use mono equipment, the left loudspeaker reproduces sound but the right speaker does not. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.

HDMI 1

USB

B Warning

When using the S-Video (AV3) connector, do not connect any device to the AV3 composite video input.

EN-31

Connect a set-top box via a composite connector

HDMI 1

R

L

Pr

R

L

Or/Ou/O RF OUT

SERV. U

R

L

Pr

SPDIF

OUT

L + R + VIDEO

HDMI 2

Y

Pb

AV 1

Y

Pb

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

OUT

Set-top box

RF IN

CABLE

Connect a digital home theater amplifier

TV ANTENNA

HDMI 1 HDMI 2

R

L

Pr

Pb

Y

AV 1

R

L

Pr

Pb

Y

R

L

SERV. U

SPDIF

OUT

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

DIGITAL

AUDIO

OUT

DIGITAL

AUDIO

IN

If your device has an S-VHS video jack: For improved picture quality, connect a S-Video cable with the S-Video input of AV3/side AV and connect the audio cables to the audio L and R input jacks of AV3/side

AV.

B Warning

When using the S-Video connector do not connect any device to the video jack of AV3 or the side AV.

Only the left loudspeaker reproduces sound for mono equipment. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.

Connect a DVD player/recorder via component video output connectors (YPbPr) and analog audio

Selected TV models are capable of displaying 1080i, 1080p, 720p and

480p DTV signals when connected to a DTV tuner cable box. Select the output of the cable box to either 1080i, 1080p, 720p or 480p. A

DTV signal must be available in your area.

B Warning

Due to legal requirements, it is possible that with certain copy protected PCM audio qualities from a accessory device connected to the HDMI input, the digital audio signal is muted.

TV ANTENNA

HDMI 1 HDMI 2

R

L

Pr

Pb

Y

AV 1

R

L

R

L

SERV. U

SPDIF

OUT

Pr

Pb

Y

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

AV1 / AV2 :

AUDIO L + R

AV1 / AV2 :

YPbPr

DVD / Set top box

EN-32

Connect a PC

Connect a PC with an S-Video connector at the back

TV ANTENNA

HDMI 1

R

L

Pr

R

L

Pr

R

L

SERV. U

SPDIF

OUT

HDMI 2

Pb

Y

AV 1

Pb

Y

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

AUDIO

OUT

S VIDEO

Connect a PC with an S-Video connector at the side

TV ANTENNA

HDMI 1

R

L

Pr

Pb

Y

R

L

Pr

Pb

Y

R

L

VIDEO

S-VIDEO

L

R

SERV. U

SPDIF

OUT

HDMI 2

AV 1 AV 2 AV 3

HDMI 3

R

L

AUDIO

VIDEO

S-VIDEO

HDMI 4

USB

AUDIO

OUT

S VIDEO

Connect a PC with a DVI connector

TV ANTENNA

HDMI 1 HDMI 2

R

L

Pr

Pb

Y

AV 1

R

L

R

L

SERV. U

SPDIF

OUT

Pr

Pb

Y

AV 2

VIDEO

S-VIDEO

L

R

AV 3

DVI AUDIO

IN

HDMI 3

AUDIO

IN

AUDIO

OUT

DVI

HDMI

Connect a PC with an HDMI connector

TV ANTENNA

HDMI 1

R

L

Pr

Pb

Y

R

L

Pr

Pb

Y

HDMI 2

AV 1 AV 2

R

L

SERV. U

SPDIF

OUT

VIDEO

S-VIDEO

L

R

AV 3

HDMI 3

HDMI

EN-33

9. Glossary

Term

DVI

RGB signals

S-VHS signals

16:9

HDMI

System

HDCP

BBE

EasyLink

Digital Visual Interface

Red, Green and Blue signals

Super-VHS signals

TV format

High definition Multimedia

Interface

High-bandwidth Digital Content

Protection

Barcus Berry Electronics

Philips EasyLink

Meaning

A digital interface standard created by the Digital Display Working Group (DDWG) to convert analog signals into digital signals to accommodate both analog and digital monitors.

These are the three video signals, red, green & blue, which make up the picture. Using these signals improves picture quality.

These are 2 separate Y/C video signals from the S-VHS and Hi-8 recording standards.

The luminance signals Y (black and white) and chrominance signals C (color) are recorded separately on the tape. This provides better picture quality than with standard video (VHS and 8 mm) where the Y/C signals are combined to provide only one video signal.

Refers to the ratio between the length and height of the screen. Wide screen televisions have a ratio of 16 by 9, conventional screen TV sets have a ratio of 4 by 3.

Provides an uncompressed, all digital audio/video interface between the TV and any

HDMI-equipped audio/video component, such as set-top box, DVD player and A/V receiver. HDMI supports enhanced or high definition video plus two-channel digital audio.

Television pictures are not broadcast in the same way in all countries. There are different standards: BG, DK, I, and LL’. The System setting is used to select these different standards. This is not to be confused with PAL or SECAM color coding. PAL is used in most countries in Europe, Secam in France, Russia and most African countries.

The United States and Japan use a different system called NTSC. The inputs AV1 and

AV2 are used to read NTSC coded recordings.

A specification developed by Intel for protecting digital entertainment that uses the DVI interface. HDCP encrypts content the transmission of digital content between the video source or transmitter such as a computer, DVD player or set-top box and the digital display or receiver such as a monitor, television or projector.

A sound enhancement technology.

Enables one-touch play and one-touch standby with EasyLink compliant devices that are connected to your TV by HDMI.

EN-34

10. Troubleshooting

Symptoms

No power or indicator light.

Error message on the screen with

HDMI connection.

No sound is detected from the PC.

TV does not respond to the remote control.

The picture is distorted. It is stretched out, has short, fat, black bars on the side or top.

The picture is mostly red and green, or the picture is missing red when the TV is connected to an accessory device via component cables.

No sound on the TV loudspeaker.

Possible cause What should you do

The TV is not connected to the power.

1. Press . POWER at the right side of the TV, or press .

on the remote control.

HDCP authentication fail.

Incorrect HDMI port is connected.

Audio cable is not connected.

Batteries are installed incorrectly, or low battery power.

2. Ensure the power cord is connected tightly to the TV power connector and to the power socket outlet.

3. Remove the power cord from the power socket outlet, wait 60 seconds and reconnect the power cord.

4. Connect the TV to a different power socket outlet.

1. Ensure that your HDMI cable is certified.

2. Press SOURCE on the remote control to switch to another source and then switch back to the HDMI source.

3. Reset the accessory device and the TV.

Turn on the TV

Select the HDMI channel

Turn on the accessory device

4. While the TV and the accessory device are powered on, unplug either end of the HDMI cable and then reinsert the cable.

1. Connect a DVI-HDM cable to the HDMI 3 port on the TV.

2. Connect an audio cable to the DVI AUDIO IN port on the TV.

3. Press SOURCE on the remote control, and select the HDMI 3 source.

1. Ensure the indicator light on the TV blinks when the remote control buttons are pressed.

Broadcast video format.

Insecure/incorrect connection.

2. Ensure that you are using the remote control supplied with the TV.

3. Ensure that the batteries of the remote control are inserted according to the illustration on the remote control and that the batteries do not need to be replaced.

4. Remove the power cord from the power socket outlet, wait 60 seconds and reconnect the power cord.

1. Press the FORMAT button on the remote control to select the best picture format.

2. For some accessory devices, the picture format has to be set in the accessory device.

1. Ensure all the connections are made according to the color code.

2. Push the component cables all the way into the YPbPr sockets on the TV.

Bad picture quality with a coaxial connection.

No picture or sound.

Cannot control your TV and connected devices with one remote control.

Volume level is set to zero.

Sound is muted.

Headphones are connected.

Audio cable is not connected.

1. Increase the volume.

2. Press MUTE on the remote control.

3. Ensure the headphones are not plugged into the TV.

4. For AV connection, ensure that the Audio L/R cable is connected as described in Connect your devices on page 31.

If you are using a component cable, ensure that you have not crossed the red audio cable with the red video cable.

5. For HDMI connections, some accessory devices have an HDMI audio output setting that must be turned on for HDMI to HDMI connections.

1. Connect the devices via component or HDMI cables.

Accessory device audio output setting is incorrect.

Standard definition channels are not as clear as high definition channels.

Incorrect channel

Incomplete channel installation.

1. Ensure you have selected the correct channel.

1. If the TV receives channels via an AV connection, set the TV to the correct source input.

2. If the TV is connected directly to the wall via a coaxial connection, perform the auto-installation again.

1. Confirm that the connected devices are EasyLink compliant and are connected to your TV via an HDMI cable. Not all brands of devices such as

DVD players use the same system as Philips EasyLink. Other brands might not work with Philips EasyLink.

EN-35

11. Notes for the use of USB devices

Digital Content Issues

• Only FAT (DOS) formatted (initialized) portable memory is supported. Errors in this formatting can result in unreadable content. If such problems appear try to re-format the card. Be aware that formatting the card will also delete all the content on it

(pictures, music, …).

The following file types are supported: .jpg, .jpeg, .mp3, .alb, .m3u and .pls.

Only linear JPEG picture formats are supported. Progressive JPEG and JPEG2000 encodings are not supported.

• The length of a filename or directory name is limited to the length specified by the FAT16/32 file systems.

Max. levels of nested directories is 19.

Never use the supported file type extensions (.jpg, .jpeg, .mp3, .alb,

.m3u and .pls) as extensions for directories as these directories will be treated as corrupted files.

The MP3 decoder does not support MPEG1 Layer 1 or Layer 2 playback.

MP3 Pro files can be played with normal MP3 quality.

The access and response time of the content on a device can differ depending on the type or brand of the device.

The access and response time of the content on a device will increase the more unsupported or corrupted files are on the device.

The following subsets of the Mass Storage Class specification are supported:

• The implementation of the TV is based on the “Universal Serial

Bus Mass Storage Class Specification Overview” (v1.2, June 23,

2003) including all documents referenced by the document. The document can be found on the USB standardization website

(www.usb.org).

• Full support of the USB Mass Storage Class Bulk-Only Transport

(bInterfaceProtocol = 50h).

• Full support of SubClass Code = 05h; SFF-8070i spec.

• Full support of SubClass Code = 06h; SCSI transparent command set.

For large USB memory devices, when you are in the Content

Browser, it may take a long time before you can access your files.

When using a USB portable hard disk: Due to the high power consumption of the hard disk, it is advised to use the external power supply of the portable hard disk to guarantee proper working under all conditions.

Digital Camera Issues

• If a USB connection between your digital camera and the TV isn’t working, you can try the solutions below to resolve your problem.

Make sure your digital camera is switched on and verify if the configuration of your digital camera is correct (see the manual of your digital camera for more information).

Some digital cameras allow you to switch off the USB interface.

Make sure that the USB interface is switched on before connecting to the TV.

If you have a digital camera with only internal memory (no removable memory) you can try to copy the content manually to a USB memory device (e.g. Philips KEY product) using a personal computer.

Some digital cameras allow you to switch between PTP (Picture

Transfer Protocol) or “PC Link” and USB Mass Storage or “PC

Drive”. Make sure that you select USB Mass Storage or “PC

Drive” on your digital camera.

If your camera supports different interface settings be sure to try them one by one or contact the reseller of your camera to find out the correct setting.

USB Memory Device Issues

• Devices connected to the USB port of your TV must be “Mass

Storage Class” compliant. If your device (digital camera. MP3 player, portable hard disk, …) is not “Mass Storage Class” compliant it will not be detected by the content browser of the TV.

EN-36

12. Technical specifications

Feature

Type no.

PICTURE ENHANCEMENT

Type

Brightness

Aspect Ratio

Response Time

Viewing Angles

Built-in digital tuner

HD Natural Motion

Dynamic Dimming BL

Ambient Light Sensor

Ambilight

SOUND ENHANCEMENT

Mono/Stereo/BBE

Power output

(RMS Watts)

Equalizer

EASE OF USE

Video modes

PC input

Photo Slide Show

MP3 Playback

CONNECTIONS

Component video input with Audio

L/R

Composite video input with audio

L/R and S-Video

HDMI

Digital audio out

Headphone

USB

MISCELLANEOUS

Auto multi-voltage

Table Top Stand Swivel

Description

42-57PFL7603D

Yes

Yes

Yes

1080p 120Hz

500 cd/m2

16:9

2ms

178 (V) by 178 (H)

ATSC/QAM

Yes

30 W

5 band

Automatic, 4:3, Movie Expand 14:9, Movie Expand 16:9, Super Zoom, Wide Screen, Unscaled via HDMI

Yes (jpeg files only)

Yes (mp3 files only)

2, supporting 480i/p, 576i/p, 720p, 1080i, 1080p @24Hz-60Hz

2

4, ver1.3a HDMI supporting video: 480i/p, 576i/p, 720p, 1080i, 1080p @24Hz-60Hz, PC-input: up to WUXGA

Yes, supporting AC-3 & PCM

1 (on the side of TV)

1 (on the side of TV)

110V-240V~/50-60 Hz, 120V

Yes

EN-37

13. Index

A

Active control 14

Ambilight

Adjust settings 15

Change mode 15

Color 15

Modes 15

Antenna, connect 7

Audio 15

Alternate 15

Language 15

Auto format 14

Automatic

Channel installation 26

Surround 15

Volume leveling 15

Auto Mode 16

B

Back connectors 6

Balance, Ambilight 15

Batteries 7

Blu-ray 29

Brightness

Ambilight 15

Picture 14

C

Cable

Component 30

Composite 30

HDMI 30

Management 8

Quality comparison 30

S-Video 30

YPbPr 30

CA module 29

Care

EN-38

Environment 5

Screen 5

Channels

Favorite list 16

Install 26

Child lock

Lock all channels/devices 18

Lock one or more channel/device 18

PIN code 18

Set movie rating 19

Set TV rating 19

Clock 17

Closed captions 21

Color

Enhancement 14

Picture setting 14

Temperature 14

Component cable 30

Composite cable 30

Configuring the TV in HDTV mode

24

Connection

Antenna 7

Back connectors 6

Cable quality 30

DBS 7

Devices 31

Label 30

Overview 29

PC 33

Power cord 8

Set-top box 8

Side connectors 6

Contrast 14

Controls 6

Customer support service 5

I

E

F

L

Device, connect 31

Disconnect power 8

Display, native 1080 24

Supported formats 25

Dynamic contrast 14

EAS 27

Emergency alerts 27

Environmental care 5

Equalizer 15

Favorite lists 16

H

HDCP 30

HDMI cable 30

HDTV mode 24

Home mode 26

Horizontal shift 14

Installation

Channels 26

First time 9

Label connections 30

Language

Audio 15

Menus 26

Location 26

Locks.

See

Child lock

D

DBS, connect 7

Default, return to 27

Delta volume 15

Demo mode 25

M

Menu

Language 26

Quick access 13

Mode

HD 24

Home or retail store 26

PC 24

Model number 5

Movie expand 14

Movie ratings 20

MPEG artefact reduction 14

Multimedia 22

Music.

See

Photos and music

N

Noise reduction 14

O

One-touch play 25

Overview, TV 6

P

Parental control.

See

Child lock

PC mode 24

Photos and music 22

Connect USB device 22

Listen to music 23

View photos 23

View slide show with music 23

Picture

Adjust settings 13

Auto modes 16

Change format 14

PIN code 18

Power cord

Connect 8

Disconnect 8

Product information 5

Q

Quick access menu 13

R

Ratings

Movie 20

Region 21

TV 19

Recycling 5

Region ratings 21

Register your TV 5

Remote control

Advanced use 12

Basic use 6

Batteries 7

Retail store mode 26

S

Screen care 5

Screen resolution, PC mode 24

Settings 15

Settings assistant 13

Set-top box, connection 8

Sharpness 14

Shift

Horizontal 14

Vertical 14

Side controls and connectors 6

Signal quality 26

Sleeptimer 17

Software

Update 28

Version 28

Sound

Auto modes 16

Surround mode 15

Specifications

37

Store mode 26

Super zoom 14

S-Video cable 30

T

Technical specifications

37

Timer

Clock 17

Sleeptimer 17

Tint 14

TV

Model number 5

Overview 6

Position 7

Ratings 19

U

Upgrade software 28

USB 22

Connector 29

Notes on use 36

V

Version, software 28

Vertical shift 14

Video cable 30

Video format, HD mode 24

Y

YPbPr cable 30

EN-39

14. Warranty

WARRANTY COVERAGE:

PHILIPS warranty obligation is limited to the terms set forth below.

WHO IS COVERED:

Philips warrants the product to the original purchaser or the person receiving the product as a gift against defects in materials and workmanship as based on the date of original purchase

(“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof.

WHAT IS COVERED:

The Philips warranty covers new products if a defect in material or workmanship occurs and a valid claim is received by Philips within the Warranty Period. At its option, Philips will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or serviceable used parts and is at least functionally equivalent or most comparable to the original product in Philips current inventory, or (3) refund the original purchase price of the product.

Philips warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Philips’ property. When a refund is given, your product becomes Philips’ property.

Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty.

Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay.

WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-

TATIONS:

This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product.

PHILIPS LIMITED WARRANTY

ONE (1) YEAR

Philips, or (d) if any Philips serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished Philips product sold “AS IS” by some retailers.

This Limited Warranty does not cover:

• Shipping charges to return defective product to Philips.

• Labor charges for installation or setup of the product, adjustment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product.

• Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary content for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of Philips.

• Damage or claims for products not being available for use, or for lost data or lost software.

• Damage from mishandled shipments or transit accidents when returning product to Philips.

• A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.

• A product used for commercial or institutional purposes

(including but not limited to rental purposes).

• Product lost in shipment and no signature verification receipt can be provided.

• Failure to operate per Owner’s Manual.

TO OBTAIN ASSISTANCE IN THE U.S.A., PUERTO

RICO, OR U.S. VIRGIN ISLANDS…

Contact Philips Customer Care Center at:

1-888-PHILIPS (1-888-744-5477)

TO OBTAIN ASSISTANCE IN CANADA…

1-800-661-6162 (French Speaking)

1-888-PHILIPS (1-888-744-5477) - (English or Spanish

Speaking)

Philips is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty.

This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplication, or non-Philips product, (b) to damage caused by service performed by anyone other than

Philips or Philips Authorized Service Location, (c) to a product or a part that has been modified without the written permission of

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS

WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-

SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-

TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF

ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-

UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE

LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT

IS LIMITED IN DURATION TO THE DURATION OF THIS

WARRANTY.

Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.

Philips, P.O. Box 671539, Marietta, GA. 30006-0026

3121 233 48802

EN-40

© 2007 Koninklijke Philips Electronics N.V.

All rights reserved.

Document order number:

12NC: 3139 125 39453

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement