Product Brochure
Easy to Use
Graphical display and simplified
touch screen make the system
easy to use even when something
goes wrong.
Prime Screen
Infuse Screen
Because Your Patient’s Life May Depend On It!
Safety Simplified
The Belmont Rapid Infuser automatically and continuously monitors both
the infusion process and the device operation. If an unsafe condition
occurs, alarms identify the problem and the touch screen displays how
to solve it.
At each alarm condition, the system stops pumping and heating, and
closes off the patient line. Instantly, fluid to the patient is rerouted back
to the reservoir.
High Line Pressure Alarm Screen
Ordering Information:
Hardware Specifications:
Rapid Infuser, 1000 ml/min:Infusion rate: 2.5-1000 ml/min
Dimensions:
13.5 in. x 7.5 in x 12 in.
US: part # 903-00023 (120V)
Weight:
28 lbs.
International: part # 903-00024 (230V)
Rapid Infuser, FMS 2000:
Infusion rate: 2.5-750 ml/min
Portability:
Quick-on IV pole mount or handle
at top of unit.
US: part # 903-00001 (120V)
Power:
115 volt or 220/240 volt AC input.
International: part # 903-00001A (230V)
Military Field Model: part # 903-00001B
Battery:
Internal, rechargeable for transport.
Operates all functions without heating.
NSN 6515014652059
Fluid Pump: Roller type peristaltic pump.
Flow rate 2.5-1000 ml/min.
Standard Disposable:
part # 903-00006
Heater:
Maximum applied power, 1440 watts.
Special 3 Liter Reservoir:
part # 903-00018
Sensors:
2 air bubble sensors, pressure transducer
(fluid), 2 temperature probes (infrared
sensing), pump flow rate sensor, open
door detector, and valve activation sensor.
Control Computer:
Built-in, controls all functions, with
redundant hardwired override protection
in case of computer failure.
Display:
5 in. x 2.5 in. electroluminescent type
with waterproof touch pad.
UL2601-1 49WB
Made in the U.S.A. The Belmont® Rapid Infuser has been evaluated with respect
to electrical safety, fire and mechanical hazards, in accordance with UL2601-1,
CAN/CSA C22.2 No. 601.1-M90, and EN 60601-1: 1990 + A1: 1993 + A11 1993
+A12: 1993 + A2: 1995 + A13: 1996; Electromagnetic Compatibility [EN606011-2 (2001) and IEC60601-1-2 (2001)] and Programmable Electronic Compatibility
system [IEC60601-1-4]
The Belmont® is the property of Belmont Instrument Corporation © 2009
12179-1209.
Belmont Instrument Corporation
780 Boston Road
Billerica, MA 01821 USA
T: 866-663-0212
F: 978-663-0214
www.belmontinstrument.com
Combat Tested
Hospital Approved
Main Features
Vent/Recirculation
Line
For safe, high-volume infusion
of blood or blood products…
in surgery…in trauma
The Belmont® Rapid Infuser combines
advanced microprocessor technology with an
efficient mechanical system to give patients
the vital warm fluids they need when they
need them.
Output
Temperature
Probe
Input Air
Detector
Unique Instant Heater
High Speed Peristaltic Fluid Pump
• Fluid, blood, or blood products
warmed to normothermia
in a single pass
• Complete flow control from
2.5 - 1,000 ml/min at the touch
of a button
• No overheating or “hot spots”
• Eliminates dangerous,
uncontrollable bag compressors
• Patented induction heater
warms without water
baths or microwaves
Pressure Sensor
and Debubbler
• Optional 3 liter reservoir
eliminates frequent bag changing
High
Speed
Peristaltic
Fluid
Pump
It infuses large amounts of life-sustaining
fluids warmed to physiological temperature
at rates from 10 - 1000 ml/min.
Flow and Temperature Delivered Rapidly and Accurately
FMS Delivery Temperature
Unparalleled Safety,
Efficiency and Usability
Temperature
(centigrade)
• Precise Control of Infusion Rate
• Simple set up
(500 milliliters/minute Flow)
Heat
Exchanger
• Automatic Air Removal
• Efficient Dry Heat
• Monitors total infused volume
for accurate I/O charting
Input Fluid Temp (centigrade)
Output
Air
Detector
• Small and lightweight
Measured Fluid Temp Temp at Pt Line (centigrade)
Displayed Fluid Temp (centigrade)
Input
Temperature
Probe
• Automatic Alarms Avoid
Unsafe Conditions
• On Screen Instructions
• Automatic Line Pressure Monitoring
• Optional Large Reservoir Facilitates
Consistent Fluid Mixtures
Time (seconds)
Infuse/Recirculation Valve
Two Disposable Options
• Operator Controlled Bolus Infusion
www.belmontinstrument.com
Call 866-663-0212 or email [email protected]
for more information or to schedule a demonstration.
120 ml Reservoir
Optional 3.0 Liter Reservoir
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement