Advertisement
Advertisement
DV-CP706̲En.book Page 1 Wednesday, July 2, 2008 10:25 AM
DVD Changer
DV-CP706
Instruction Manual
Contents
Overview ..............................................2
Connections ......................................18
Getting Started and Setting up ........23
Basic Playback ..................................25
Thank you for purchasing an Onkyo DV-CP706
DVD Changer. Read this manual carefully before using your new DVD Changer. A good understanding of its features and operation will allow you to achieve optimum performance and enjoyment.
Keep this manual for future reference.
Playback Techniques ........................36
Detailed Settings ...............................43
Miscellaneous information ...............51
E n
DV-CP706̲En.book Page 2 Wednesday, July 2, 2008 10:25 AM
2
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS
TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
PORTABLE CART WARNING
S3125A
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Damage Requiring Service
Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the apparatus,
C. If the apparatus has been exposed to rain or water,
D. If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in any way, and
F. When the apparatus exhibits a distinct change in performance this indicates a need for service.
16. Object and Liquid Entry
Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.
Don’t put candles or other burning objects on top of this unit.
17. Batteries
Always consider the environmental issues and follow local regulations when disposing of batteries.
18. If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation.
Leave 20 cm (8") of free space at the top and sides and
10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a flue-like gap for warm air to escape.
DV-CP706̲En.book Page 3 Wednesday, July 2, 2008 10:25 AM
Precautions
1. Recording Copyright —Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.
2. AC Fuse —The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact your Onkyo dealer.
3. Care —Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE
FIRST TIME, READ THE FOLLOWING SEC-
TION CAREFULLY.
AC outlet voltages vary from country to country.
Make sure that the voltage in your area meets the voltage requirements printed on the unit’s rear panel
(e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times.
5. Preventing Hearing Loss
Caution
Excessive sound pressure from earphones and headphones can cause hearing loss.
6. Batteries and Heat Exposure
Warning
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat as sunshine, fire or the like.
7. Never Touch this Unit with Wet Hands —Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer.
8. Handling Notes
• If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it.
• Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.
• This unit’s top and rear panels may get warm after prolonged use. This is normal.
• If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally.
• When you’ve finished using this unit, remove all discs and turn off the power.
9. Installing this Unit
• Install this unit in a well-ventilated location.
• Ensure that there’s adequate ventilation all around this unit, especially if it’s installed in an audio rack. If the ventilation is inadequate, the unit may overheat, leading to malfunction.
• Do not expose this unit to direct sunlight or heat sources, because its internal temperature may rise, shortening the life of the optical pickup.
• Avoid damp and dusty places, and places subject to vibrations from loudspeakers. Never put the unit on top of, or directly above a loudspeaker.
• Install this unit horizontally. Never use it on its side or on a sloping surface, because it may cause a malfunction.
• If you install this unit near a TV, radio, or VCR, the picture and sound quality may be affected. If this occurs, move this unit away from the TV, radio, or VCR.
10. To Obtain a Clear Picture —This unit is a hightech, precision device. If the lens on the optical pickup, or the disc drive mechanism becomes dirty or worn, the picture quality may be affected. To maintain the best picture quality, we recommend regular inspection and maintenance (cleaning or worn part replacement) every 1,000 hours of use depending on the operating environment. Contact your Onkyo dealer for details.
11. Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
Moisture may condense on the lens of the optical pickup, one of the most important parts inside this unit.
• Moisture condensation can occur in the following situations:
– The unit is moved from a cold place to a warm place.
– A heater is turned on, or cold air from an air conditioner is hitting the unit.
– In the summer, when this unit is moved from an air conditioned room to a hot and humid place.
– The unit is used in a humid place.
• Do not use this unit when there’s the possibility of moisture condensation occurring. Doing so may damage your discs and certain parts inside this unit.
If condensation does occur, remove all discs and leave this unit turned on for two to three hours. By this time, the unit will have warmed up and any condensation will have evaporated.
12. Region Numbers —The DVD standard uses region numbers to control how discs can be played around the world, the world being divided into six regions.
This unit will only play DVD discs that match its region number, which can be found on its rear panel
13. About this Manual —This manual explains how to use all of this unit’s functions. Although the DVD standard offers many special features, not all discs use them all, so depending on the disc being played, this unit may not respond to certain functions. See the disc’s sleeve notes for supported features.
3
DV-CP706̲En.book Page 4 Wednesday, July 2, 2008 10:25 AM
4
Precautions —Continued
This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit.
To prevent being exposed to the laser beam, do not try to open the enclosure.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS.
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARD-
OUS RADIATION EXPOSURE.
The label on the right is applied on the rear panel.
1. This unit is a CLASS 1
LASER PRODUCT and employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove the cover. Refer servicing to qualified personnel.
For U.S. models
FCC Information for User
CAUTION:
The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For Canadian Models
NOTE:
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
For models having a power cord with a polarized plug:
CAUTION:
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Modèle pour les Canadien
REMARQUE:
CET APPAREIL NUMÉRIQUE DE
LA CLASSE B EST CONFORME À LA NORME
NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
ATTENTION:
POUR ÉVITER LES CHOCS ÉLEC-
TRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRE-
SPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
DV-CP706̲En.book Page 5 Wednesday, July 2, 2008 10:25 AM
Contents
Important Safety Instructions .................. 2
Precautions................................................ 3
Introduction ............................................... 6
Supplied Accessories..................................... 6
DV-CP706 Features ...................................... 7
Disc Notes ..................................................... 8
DV-CP706-related Terminology................. 11
Controls & Connectors........................... 12
Front Panel .................................................. 12
Display ........................................................ 13
Rear Panel ................................................... 14
Remote Controller ....................................... 15
Before Using the DV-CP706 ................... 17
Installing the Remote Controller’s
Batteries ................................................. 17
Using the Remote Controller....................... 17
Connecting the DV-CP706...................... 18
Before Making Any Connections................ 18
AV Cables & Connectors............................ 18
Connecting Your TV or Projector............... 19
Connecting an AV receiver ......................... 20
Connecting a Stereo Amp ........................... 20
Connecting a Component with an HDMI
Input....................................................... 21
Connecting -compatible Components ......... 22
DV-CP706....................................... 23
Powering Up the DV-CP706....................... 23
First Time Setup .......................................... 23
Setting the HDMI ........................................ 24
Basic Playback ........................................ 25
Loading & Removing Discs........................ 25
Loading Discs During Playback.................. 26
Selecting Discs ............................................ 26
Starting, Pausing & Stopping Playback ...... 27
Navigating Disc Menus............................... 28
Using the Disc Navigation Window............ 29
Selecting Titles, Chapters & Tracks by
Number .................................................. 30
Locating Specific Points in Time ................ 31
Fast Forward & Reverse.............................. 32
Frame-by-Frame Playback .......................... 32
Slow-motion Playback ................................ 33
Adjusting the Display Brightness................ 33
Using JPEG CDs ......................................... 34
Using Chain Mode ...................................... 35
Using Party Mode ....................................... 35
Advanced Playback.................................36
Repeat Playback ......................................... 36
A–B Repeat Playback ................................. 37
Random Playback ....................................... 37
Memory Playback....................................... 38
Using Last Memory .................................... 39
Selecting Camera Angles............................ 40
Selecting Languages & Audio Formats...... 40
Selecting Subtitles ...................................... 40
Zooming...................................................... 41
Displaying Information............................... 42
Configuring the DV-CP706......................43
Using the On-screen Setup Menus ............. 44
Picture Menu............................................... 44
Audio Menu ................................................ 46
Language Menu .......................................... 47
Display Menu ............................................. 47
Operating Setting Menu.............................. 48
Initial Setup Menu ...................................... 49
Selecting Other Languages ......................... 49
Language Code List.................................... 50
Troubleshooting ......................................51
Specifications ..........................................55
5
DV-CP706̲En.book Page 6 Wednesday, July 2, 2008 10:25 AM
Introduction
Supplied Accessories
Make sure you have the following accessories:
Remote controller (RC-655DV) & 2 batteries (AA/R6)
AV connecting cable (RCA/phono) (1.5 m)
cable (0.8 m)
This cable is used to connect the DV-CP706 to other
-compatible Onkyo components for
Interactive) control.
(Remote
To use , in addition to an connection, you must make an analog audio connection (RCA) between the
DV-CP706 and your Onkyo AV receiver.
Coaxial digital cable (1.0 m)
Power cord
(Power cord varies from country to country.)
In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operation are the same regardless of color.
6
DV-CP706̲En.book Page 7 Wednesday, July 2, 2008 10:25 AM
Introduction —Continued
DV-CP706 Features
Highlights
• HDMI output with 1080p upscaling
• Dolby
*1
Digital and DTS Digital Out
*2
• Holds up to six discs
• Chain mode for successive disc playback
• Party mode plays discs in random order
• DVD-Video playback
• Audio CD playback
• MP3/WMA
*3
playback with on-screen display
• JPEG picture display and slideshow (with HD JPEG resolution via HDMI)
• CD-R, CD-RW (Audio CD, MP3/WMA/JPEG)
• DVD-R/RW, DVD+R/RW (DVD-Video, MP3/WMA/
JPEG)
• Vector Linear Shaping Circuitry
*4
Video
• 480i video output by advanced scaling devices
• Advanced 108 MHz/14-bit video D/A converter
• HDMI
*5 digital interface
• Component video output
• S-Video and composite video outputs
• Title, chapter, track, or time search
• Last Memory function allows you to resume playback from a specific point on a DVD-Video disc, even if that disc has been removed from the DV-CP706
• Supports 4:3 and 16:9 aspect ratio TVs
• View mode (Normal/View mode 1/2/3)
• Multiple camera angle support
• Parental Lock function
• Screen Saver function
Audio
• Digital/analog isolated circuit layout to reduce digital noise
• Audiophile-class performance
• Dynamic Range Control setting
• 192 kHz/24-bit D/A converter
• Coaxial digital output
• Optical digital output
• Analog output
Others
• Onkyo RIHD
*6
system control
• Ultra-quiet loading mechanism
• Load discs without stopping playback
• Program playback (32 tracks, Title, Chapter)
• Zoom function
• Adjustable display brightness
• Slow motion playback
• Fast forward and reverse
• Repeat playback options include: Chapter, Title, 1
Disc, All Discs, Track, and Folder (MP3/WMA)
• Random playback options include: Title, 1 Disc, All
Discs, and Folder (MP3/WMA)
• Supports up to 8 soundtracks/languages
• Supports up to 32 subtitle languages
*1.
*2.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent #’s: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS and
DTS Digital Out are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. All rights reserved.
*3. Windows Media, and the Windows logo are trademarks, or registered trademarks of
Microsoft Corporation in the
United States and/or other countries.
*4.
VLSC and the VLSC logo are registered trademarks of Onkyo
Corporation.
*5.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.
*6
RIHD is a trademark of Onkyo Corporation.
7
DV-CP706̲En.book Page 8 Wednesday, July 2, 2008 10:25 AM
8
Introduction —Continued
Disc Notes
Supported Discs
The DV-CP706 supports the following discs.
Disc Logo Format or file type
DVD-Video
*1
DVD-R
*2
DVD-RW
*2
DVD-Video, MP3,
WMA, JPEG
DVD-Video, MP3,
WMA, JPEG
PCM Audio CD
*3
CD-R
*2
Audio CD, MP3, WMA,
JPEG
CD-RW
*2
Audio CD, MP3, WMA,
JPEG
JPEG CD JPEG
– DVD+R/RW –
The DV-CP706 supports DVD+R/RW discs recorded in the following formats:
• Discs recorded in DVD-Video mode.
• Discs recorded in ISO 9660 Level 2 or Joliet format containing MP3, WMA, or JPEG files.
*1 The Australian model will play PAL and NTSC DVD-Video discs. When set to AUTO, PAL and NTSC video is output as it is. When set to PAL, only PAL video is output. When set to
NTSC, only NTSC video is output.
*2 MP3, WMA, and JPEG files are supported on discs recorded in
ISO 9660 Level 2 or Joliet format. (See “MP3/WMA/JPEG
Compatibility” on page 9 for more details.) However, some
CD-R, CD-RW, DVD-R, and DVD-RW discs may not work properly for any of the following reasons: incomplete disc finalization, disc burner characteristics, disc characteristics, the disc is damaged or dirty, the total size of the data is too small.
See the manual supplied with your disc burner for more information. Condensation or dirt on the optical pickup lens can also affect playback.
*3 Some audio CDs feature copy protection that doesn’t conform to the official CD standard. Since these are nonstandard discs, they may not play properly in the DVCP706.
• The DV-CP706 supports DVD-R/+R dual layer discs.
• The DV-CP706 does not support disc types not listed.
• The DV-CP706 supports 8 cm and 12 cm discs.
• Don’t use discs with an unusual shape, such as those shown below, because you may damage the
DV-CP706.
• Don’t use discs that have residue from adhesive tape, rental discs with peeling labels, or discs with custommade labels or stickers. Doing so may damage the
DV-CP706 and you may not be able to remove the disc properly.
About playing copy-controlled CDs
Some copy-controlled CDs may not conform to official
CD standards. They are special discs and may not play on the DV-CP706.
DVD Region Numbers
1
4
The North American DV-CP706 supports only
Region 1 DVD-Video discs bearing this logo.
The Australian DV-CP706 supports only Region
4 DVD-Video discs bearing this logo.
If you attempt to play a disc intended for another region, a message saying that the disc cannot be played appears.
Function Support
The following icons are used throughout this manual to indicate which functions can be used with the various disc formats and file types.
Icon
DVD
Disc format or file type
DVD-Video
CD Audio CD
MP3 MP3 file
WMA WMA file
JPEG JPEG file
About this Manual
This manual explains how to use all of the DVD player’s functions. Although the DVD standard offers many special features, not all discs use them all, so depending on the disc being played, the DVD player may not respond to certain functions. See your disc’s sleeve notes for supported features.
When you attempt to use a DVD feature that is not available, this logo may appear on-screen, indicating that the feature is not supported by the current disc or by the DVD player.
DV-CP706̲En.book Page 9 Wednesday, July 2, 2008 10:25 AM
Introduction —Continued
Disc Content Organization
■
DVD-Video Format
DVD-Video discs contain titles, which are usually subdivided into chapters.
Title 1
Chapter 1 Chapter 2
Title 2
Chapter 1 Chapter 2
DVD-Video
■ Audio CD Format
Audio CDs contain tracks.
Track 1 Track 2 Track 3 Track 4 Track 5
Audio CD
■ MP3/WMA Files
MP3 and WMA files are typically organized into folders.
The DV-CP706 handles MP3 and WMA files as tracks.
Track 1
Folder 1
Track 2 Track 3
Folder 2
Track 1 Track 2
MP3/WMA
(CD-R/CD-RW/DVD-R/DVD-RW/
DVD+R/DVD+RW)
■ JPEG Files
JPEG picture files are typically organized into folders.
The DV-CP706 handles JPEG files as tracks.
Track 1
Folder 1
Track 2 Track 3
Folder 2
Track 1 Track 2
JPEG
(CD-R/CD-RW/DVD-R/DVD-RW/
DVD+R/DVD+RW)
MP3/WMA/JPEG Compatibility
• The DV-CP706 can play/display MP3, WMA, and
JPEG files recorded on CD-R, CD-RW, DVD-R,
DVD-RW, DVD+R and DVD+RW discs.
• Discs must be in ISO 9660 Level 2 or Joliet format
(folders can be up to eight levels deep). Music files recorded on discs that use the HFS (hierarchical file system) cannot be played.
• Discs must be finalized.
• The DV-CP706 can only recognize the first session on multisession discs.
• You can determine the order in which the DV-CP706 plays/displays your MP3/WMA songs and JPEG pictures by prefixing file and folder names with a threedigit number. For example 001.Root, 002.Folder, and so on, and 001.Track.mp3, 002.Track.mp3, and so on.
• Only the first eight characters of folder and track names
(excluding the filename extension) are displayed.
• The folder numbered “001” appears as “ROOT” in the
Disc Navigator.
• The DV-CP706 supports up to 255 folders and up to
255 files per folder.
• If you try to play an incompatible file, the message
“This format cannot be played” appears on the display.
■
MP3
• MP3 files must be MPEG1 Audio Layer 3 format, 44.1 or 48 kHz, fixed bit-rate.
• MP3 files must have a “.mp3” or “.MP3” filename extension.
• Variable bit-rates (VBR) from 64 kbps to 320 kbps are supported. (Playing times may display incorrectly with VBR.)
■ WMA
• WMA files must have the copyright option turned off.
• Sampling rates 44.1/48 kHz are supported.
• Variable bit-rates (VBR) from 48 kbps to 192 kbps are supported. (Playing times may display incorrectly with VBR.)
• WMA files must have a “.wma” or “.WMA” filename extension.
■ JPEG
• JPEG files must have a “.jpg” or “.JPG” filename extension.
• JPEG files must be less than 5 megabytes in size.
About WMA
WMA is an acronym for Windows Media Audio and refers to an audio compression technology developed by
Microsoft Corporation. WMA content can be encoded by using Windows Media
®
Player version 7, 7.1 or 8.
9
DV-CP706̲En.book Page 10 Wednesday, July 2, 2008 10:25 AM
Introduction —Continued
Handling Discs
• Never touch the underside of a disc. Always hold discs by the edge, as shown.
Underside
• Never attach adhesive tape or sticky labels to discs.
Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material without permission.
DVD-Video discs are copy-protected, and any recordings made from these discs will be distorted.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright-protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Cleaning Discs
• For best results, keep your discs clean. Fingerprints and dust can affect the sound and picture quality and should be removed as follows. Using a clean soft cloth, wipe from the center outwards, as shown. Never wipe in a circular direction.
✔
• To remove stubborn dust or dirt, wipe the disc with a damp soft cloth, and then dry it with a dry cloth.
• Never use solvent-based cleaning fluids, such as thinner or benzine, commercially available cleaners, or antistatic sprays intended for vinyl records, because they may damage the disc.
Storing Discs
• Don’t store discs in places subject to direct sunlight, or near heat sources.
• Don’t store discs in places subject to moisture or dust, such as in a bathroom or near a humidifier.
• Always store discs in their cases and vertically. Stacking, or putting objects on unprotected discs may cause warping, scratches, or other damage.
10
DV-CP706̲En.book Page 11 Wednesday, July 2, 2008 10:25 AM
Introduction —Continued
DV-CP706-related Terminology
■ CD-R (Compact Disc Recordable): A type of
CD that can be recorded only once. Can be used to make audio CDs, or MP3/WMA/JPEG discs.
■ CD-RW (Compact Disc Rewritable): A type of
CD that can be recorded many times. Can be used to make audio CDs, MP3/WMA/JPEG discs.
■ Chapter: Titles on DVD-Video discs can be subdivided into chapters.
■ Component video: A video connection format that separates the luminance (Y) and color difference signals (P R , P B ), providing better picture quality than
S-Video.
■ Composite video: A video connection format that mixes the luminance and color signals together.
■ Dolby Digital: The multi-channel digital surround sound format used on most DVD-Videos.
■ Downmixing: The process of mixing multiple audio channels into fewer channels. For example, a surround mix can be downmixed into two channels for reproduction on stereo systems.
■ Downsampling: The process of reducing the sampling rate of digital audio.
■ DTS (Digital Theater System): The surround format that uses less compression for faithful reproduction.
■ DVD-R (DVD Recordable): A type of DVD disc that can be recorded only once. Can be used to make
DVD-Video discs or to store computer data.
■ DVD-RW (DVD Rewritable): A type of DVD disc that can be recorded many times. Can be used to make DVD-Video discs or to store computer data.
■ DVD-Video: The format for storing movies on
DVD, with interactive menus, multiple language soundtracks, subtitles, camera angles, and so on.
■ Field: In interlaced scanning, a field is a single scan of the screen. There are two fields per frame.
■ Frame: An individual TV picture is called a frame.
With the NTSC color system there are 30 frames per second.
■ HD: Abbreviation for high definition, as in
HDTV(high-definition TV).
■ HDCP (High-bandwidth Digital Content
Protection): The video encryption technology developed by Intel for HDMI/DVI. It’s designed to protect video content and requires a HDCP-compatible device to display the encrypted video.
■ HDMI (High Definition Multimedia Interface):
A new connection format that greatly simplifies AV connections by carrying uncompressed SD or HD digital video and digital audio all in one cable.
■ Interlaced scanning: TV pictures are made by scanning the screen in horizontal lines from top to bottom. With Interlaced scanning, two scans ( fields ) are used to make each picture ( frame ). Contrast with
Progressive scanning.
■ JPEG (Joint Photographic Experts Group):
The compressed file format used to store digital photos.
■ LFE (Low-Frequency Effects): The surroundsound channel used for low-frequency effects.
■ Linear PCM: The uncompressed digital audio format used for audio CDs. PCM stands for Pulse Code modulation.
■ MP3 (MPEG 1 Audio Layer 3): Popular compressed file format for storing digital music.
■ MPEG1 (Moving Picture Experts Group 1):
The compressed digital video format used for Video
CDs.
■ MPEG2 (Moving Picture Experts Group 2):
The compressed digital video format used for
DVD-Videos, offering better picture quality than
MPEG1.
■ NTSC: The color TV system used in the United
States, Japan, Taiwan, and Korea.
■ PAL: The color TV system used in most of Europe, the United Kingdom, Australia, Brazil, and China.
■ Progressive scanning: TV pictures are made by scanning the screen in horizontal lines from top to bottom. With progressive scanning, each picture
( frame ) is made by scanning the entire screen in one go, resulting is a clearer and stabler picture. Contrast with Interlaced scanning.
■ RIHD (Remote Interactive over HDMI):
Onkyo’s implementation of CEC (Consumer Electronics Control), which allows integrated system control over HDMI and is part of the HDMI standard.
■ S-Video: A video connection format that separates the luminance (Y) and color (C) signals, providing better picture quality than composite video.
■
■
Title: Movies on DVD-Video are called titles.
WMA (Windows Media Audio): A compressed file format for storing digital music.
11
DV-CP706̲En.book Page 12 Wednesday, July 2, 2008 10:25 AM
Controls & Connectors
Front Panel
A B C D E F G
H I J K L M N O P Q R S
12
The page numbers in parentheses show where you can find the main explanation for each item.
A
This button is used to set the DV-CP706 to On or
Standby.
Don’t turn on the power until you’ve completed, and double checked all connections.
B
This indicator lights up when the DV-CP706 is in
Standby mode.
C
The disc tray has six bays for loading up to six discs.
D
E
This button is used to select the disc bays (i.e., rotate the disc tray) when loading or removing discs, and to select discs for playback.
F
Disc tray light
This light illuminates the disc tray. It comes on when the DV-CP706 is turned on, and is brighter while the disc tray is open.
These buttons are used to select discs. Playback starts automatically when a disc is selected with these buttons.
G Open/Close [
This button is used to open and close the disc tray.
H
This button is used with the Random function.
I
This button is used to adjust the display brightness and turn the disc tray light on or off.
J
This button is used to display information about the current disc, title, chapter, or track, including the elapsed time, remaining time, total time, and so on.
K
L Display
See “Display” on page 13 for more information.
M
This button is used with the Repeat function.
This sensor receives control signals from the remote controller.
N Previous [
This button is used to select the previous chapter or track. During playback it selects the beginning of the current track.
O Next [
This button is used to select the next chapter or track.
P
This button is used with the Party mode function.
Q
This button is used to pause playback.
R
This button is used to stop playback and to cancel
Party mode.
S PLAY [
This button is used to start playback and to cancel fast forward and fast reverse.
DV-CP706̲En.book Page 13 Wednesday, July 2, 2008 10:25 AM
Controls & Connectors —Continued
Display
1 2 3
CHAIN MODE DISC TITLE
ALL
DVD
CD
4 5 6 7 8 9 0 A B C
CHP TRACK PRGV LAST TOTAL REMAIN
CDVD
1 2 3
4 5 6
D E F
The page numbers in parentheses show where you can find the main explanation for each item.
1
CHAIN MODE, ALL, DVD & CD indicators
6
The CHAIN MODE indicator appears when the
Chain mode function is on. The ALL, DVD, and CD indicators show the type or Chain mode selected.
When Party mode is selected, the CHAIN MODE and CD indicators appear.
2
DISC indicator
The number of the currently selected disc appears here.
3
TITLE indicator
While stopped, the total number of titles on the current DVD-Video disc is displayed here. During playback, the number of the current title is displayed.
4
CHP indicator
This indicator appears while the number of the current chapter is being displayed.
5
TRACK indicator
This indicator appears while track numbers are being displayed. While stopped, the total number of tracks on the current audio CD, or MP3/WMA disc are displayed. During playback, the number of the current track is displayed.
PRGV indicator
This indicator appears when the component video output is outputting progressive video. While the indicator is shown, nothing is output by the other video outputs.
7
This indicator appears when the Last Memory function has been set.
8
TOTAL indicator
This indicator appears while the total time is being displayed.
9
REMAIN indicator
This indicator appears while the remaining time is being displayed.
0
Camera angle
This indicator appears if the DVD-Video disc being played features multiple camera angles.
A
Play
This indicator is shown during playback.
B
This indicator appears when playback is paused.
C
These indicators show how many discs are loaded.
The number of the current disc has a circle around it.
When the disc tray is closed, all of the disc indicators appear until the DV-CP706 has checked each bay for the presence of a disc. If a bay is found to have no disc, the corresponding indicator disappears.
D
Chapter & track number
Chapter and track numbers appears here.
E
Time display
Time information, such as total time, remaining time, and so on, is displayed here in hours, minutes, and seconds. Other messages are also displayed.
F
CDVD indicator
This indicator shows the type of disc currently selected:
DVD: DVD-Video, DVD-R, DVD-RW, DVD+R, or
CD:
DVD+RW
Audio CD, MP3/WMA/JPEG CD-R, or
CD-RW
13
DV-CP706̲En.book Page 14 Wednesday, July 2, 2008 10:25 AM
Controls & Connectors —Continued
Rear Panel
14
1 2 3 4 5 6 7
A ANALOG AUDIO OUTPUT
These RCA/phono connectors can be connected to analog audio inputs on a hi-fi amp, or AV receiver.
B
C
D
E HDMI OUT
This HDMI jack outputs digital video and audio and can be connected to an HDMI input on a compatible
TV or other component.
F
COAXIAL AUDIO OUTPUT
This coaxial digital audio output can be connected to a coaxial digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital,
DTS).
VIDEO OUTPUT
This RCA/phono connector can be used to connect a TV or projector with a composite video input.
G
OPTICAL AUDIO OUTPUT
This optical digital audio output can be connected to an optical digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital,
DTS).
S VIDEO OUTPUT
This connector can be used to connect a TV or projector with an S-Video input.
H
REMOTE CONTROL
These (Remote Interactive) connectors can be connected to the connectors on your other
Onkyo AV components for interactive control.
If you’re using RIHD, do not connect anything to these connectors.
COMPONENT VIDEO OUTPUT
These RCA/phono connectors can be used to connect a TV or projector with component video inputs.
I AC INLET
The supplied power cord connects to this polarized inlet. The other end of the power cord should be connected to a suitable wall outlet. On the Australian model, the power cord is not polarized.
8
See page 19–22 for connection information.
9
DV-CP706̲En.book Page 15 Wednesday, July 2, 2008 10:25 AM
L
M
N
O
4
5
6
7
8
9
J
K
Controls & Connectors —Continued
Remote Controller
1
2
3 e f g
P
Q
R
S
T
U
V
W
X
Y
Z a b c d
The page numbers in parentheses show where you can find the main explanation for each item.
A
This button is used to turn on the DV-CP706.
Don’t turn on the DV-CP706 until you’ve completed, and double checked all connections.
B
This button is used to set the DV-CP706 to Standby.
C
Number buttons (30, 31, 38, 48)
These buttons are used to enter title, chapter, and track numbers and to enter times for locating specific points in time.
To enter a single-digit number, simply press the corresponding button. To enter a double-digit number, enter the numbers in order from left-to-right (e.g., to enter 14, press [1] then [4].
The [+10] button is used to enter multiples of ten
(i.e., 10, 20, 30, and so on). For example, to enter the number 25, press the [+10] button twice followed by the [5] button.
D
This button is used to select foreign language soundtracks and audio formats (e.g., Dolby Digital or DTS).
E
This button is used to select subtitles.
F
This button is used with the Random Playback function.
G SLOW [ ]/[
These buttons are used for slow motion playback.
H Previous [
This button is used to select the previous chapter or track. During playback it selects the beginning of the current track.
I Play [
This button is used to start playback.
J Fast Reverse [
This button is used to start fast reverse.
K
[ ], [ ], [ ], [ ] buttons (28)
These buttons are used to navigate DVD-Video menus and the on-screen setup menus.
L
This button is used to select the top menu.
M
This button is used to select the menu.
15
DV-CP706̲En.book Page 16 Wednesday, July 2, 2008 10:25 AM
16
Controls & Connectors —Continued
N
This button is used to change the view mode. Pressing and holding it for a few seconds selects Zoom mode.
O
This button is used to set the video resolution of the
HDMI OUT, and to turn the HDMI OUT on or off.
P OPEN/CLOSE [
This button is used to open and close the disc tray.
Q
DISC SKIP [+]/[–] button (25, 26)
This button is used to select the disc bays (i.e., rotate the disc tray) when loading or removing discs, and to select discs for playback.
R
This button is used to search for titles, chapters, tracks, and specific points in time.
S
This button is used with the Memory Playback function.
T
This button is used to set the Repeat Playback functions.
U
This button is used to set the A–B Repeat Playback function.
V
This button is used to cancel various functions.
W
This button is used to display information about the current disc, title, chapter, or track, including the elapsed time, remaining time, total time, and so on.
X
This button is used to select different camera angles.
Y
This button is used with the Last Memory function.
Z
This button is used to pause playback. For DVDs, pressing this button while playback is paused moves the video forward one frame at a time.
a Next [
This button is used to select the next chapter or track.
b
This button is used to stop playback.
c Fast Forward [
This button is used to start fast forward.
d
This button is used to start playback of the selected title chapter, or track and to confirm settings.
e
This button is used to open and close the on-screen setup menus.
f
This button is used to return to the previous screen.
g
This button is used with the Chain mode function.
DV-CP706̲En.book Page 17 Wednesday, July 2, 2008 10:25 AM
Before Using the DV-CP706
Installing the Remote Controller’s
Batteries
1 Open the battery compartment, as shown.
Using the Remote Controller
To use the remote controller, point it at the DV-CP706’s remote control sensor, as shown below.
Remote control sensor
DV-CP706
2 Insert the two supplied batteries (AA/
R6) in accordance with the polarity diagram inside the battery compartment.
30˚
30˚
Appr ox
. 16 ft.
(5 m)
3 Close the battery compartment.
Notes:
• If the remote controller doesn’t work reliably, try replacing both batteries.
• Don’t mix new and old batteries, or different types of batteries.
• If you intend not to use the remote controller for a long time, remove the batteries to prevent possible leakage and corrosion.
• Flat batteries should be removed as soon as possible to prevent possible leakage and corrosion.
Notes:
• The remote controller may not work reliably if the
DV-CP706 is subjected to bright light, such as direct sunlight or inverter-type fluorescent lights. Keep this in mind when installing the DV-CP706.
• If another remote controller of the same type is used in the same room, or the DV-CP706 is installed close to equipment that uses infrared rays, the remote controller may not work reliably.
• Don’t put anything, such as a book, on the remote controller, because the buttons may be pressed inadvertently, thereby draining the batteries.
• The remote controller may not work reliably if the
DV-CP706 is installed in a rack behind colored glass doors. Keep this in mind when installing the
DV-CP706.
• The remote controller will not work if there’s an obstacle between it and the DV-CP706’s remote control sensor.
17
DV-CP706̲En.book Page 18 Wednesday, July 2, 2008 10:25 AM
18
Connecting the DV-CP706
This chapter explains how to connect the DV-CP706 to your other AV components.
Before Making Any Connections
• Read the manuals supplied with your AV components.
• Don’t connect the power cord until you’ve completed all audio and video connections.
Optical Digital Jack
The DV-CP706’s optical digital jack has shutter-type cover that open when an optical plug is inserted and close when it’s removed. Push plugs in all the way.
Caution: To prevent shutter damage, hold the optical plug straight when inserting and removing.
RCA/phono AV Connection Color Coding
RCA/phono AV connections are usually color coded: red, white, and yellow. Use red plugs to connect rightchannel audio inputs and outputs (typically labeled “R”).
Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”). And use yellow plugs to connect composite video inputs and outputs.
Right (red)
Left (white)
Analog audio
Composite video
(Yellow)
• Push the plugs in all the way to make a good connection.
• To prevent interference, keep audio and video cables away from power cords and speaker cables.
Right (red)
Left (white)
(Yellow)
Right!
Wrong!
AV Cables & Connectors
HDMI
HDMI connections can carry uncompressed, standard or high definition digital video and digital audio, for the best picture and sound quality.
Video
Component video
S-Video
Composite video
Y
P
B
P
R
Y
P
B
P
R
Component video separates the luminance
(Y) and color difference signals (P R , P B ), providing the best picture quality. (Some
TV manufacturers label their component video inputs slightly differently.)
S-Video provides better picture quality than composite video.
Composite video can be found on virtually all TVs, VCRs, and other video equipment.
Use only dedicated composite video cables.
Audio
Optical digital
Coaxial digital
Optical digital audio connections with the optical digital audio output and a suitable
AV receiver, you can enjoy DVD-Videos with surround sound.
Coaxial digital audio connections with the coaxial digital audio output and a suitable
AV receiver, you can enjoy DVD-Videos with surround sound.
Analog
RCA/phono analog audio connectors can be found on virtually all AV components.
DV-CP706̲En.book Page 19 Wednesday, July 2, 2008 10:25 AM
Connecting the DV-CP706 —Continued
Connecting Your TV or Projector
This section explains how to connect the DV-CP706 to
your TV or projector. See page 21 for connecting a TV
or projector that supports HDMI.
In this hookup example, the TV handles the audio and video. To enjoy Dolby Digital or DTS (surround), you’ll
need a compatible decoder (see page 20).
The DV-CP706 has four types of video output: HDMI, component video, S-Video, and composite video .
HDMI offers the best picture quality, so if your TV sup-
ports it, see page 21. Component video offers the next
best picture quality, so if your TV supports it, use a commercially available component video cable to connect the DV-CP706’s COMPONENT VIDEO OUTPUT to the component video input on your TV. If your TV supports progressive scanning, you must use component video in order to take advantage of that feature. S-Video offers better picture quality than composite video, so if your TV supports it, use the S-Video cable to connect the
DV-CP706’s S VIDEO OUTPUT to an S-Video input on your TV. Failing that, use the supplied composite video cable to connect the DV-CP706’s VIDEO OUTPUT to a composite video input on your TV.
Compatibility of this unit with progressive-scan TVs.
This player is compatible with progressive video Macro
Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CON-
NECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARD-
ING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
(red)
(white) (yellow)
S-Video cable
AV RCA/phono cable (supplied)
(red)
(white)
Only one connection required! Choose component video,
S-Video, or composite video.
(yellow)
S VIDEO IN
VIDEO IN
L
R
ANALOG
INPUT
Component video cable
Y P
B
IN
P
R
TV or projector
19
DV-CP706̲En.book Page 20 Wednesday, July 2, 2008 10:25 AM
20
Connecting the DV-CP706 —Continued
• When the HDMI Output setting is set to On (see
page 45), the DV-CP706 cannot output progres-
sive video. To output progressive video, you must
set the HDMI Output setting to Off (see page 45),
and set the Progressive setting to Progressive (see
• When the Progressive setting is set to Progressive so that progressive video is output by the COM-
PONENT VIDEO OUTPUT, and the PRGV indicator is shown, nothing is output by the VIDEO
(composite video) and S VIDEO (S-Video) outputs. To output video from these outputs, you must set the Progressive setting to Interlaced (see
• The Progressive can also be changed by pressing and holding the Previous [ ] button, and then pressing [ON/STANDBY] button.
Notes:
• Before making any connections, turn off the
DV-CP706 and your TV and disconnect their power cords from the wall outlets.
• Also refer to the connection information supplied with your TV.
• Connect the DV-CP706’s video outputs directly to your TV. Don’t connect a VCR or other video equipment in between your DV-CP706 and TV. Doing so may result in picture distortion, because of the copy protection system used on DVD-Video discs.
• When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant digital noise, which may damage your equipment.
Connecting an AV receiver
Analog Connection
Use an RCA/phono audio cable to connect the
DV-CP706’s ANALOG AUDIO OUTPUTs to a pair of analog audio inputs on your AV receiver, as shown.
Signal flow
L
R
ANALOG
INPUT
(white) (red)
(white)
RCA/phono cable
(red)
AUDIO
OUTPUT
ANALOG
L
R
Digital Connection
To enjoy Dolby Digital or DTS surround sound, you need to connect one of the DV-CP706 digital audio outputs to the digital input on a Dolby Digital or DTS decoder or an AV receiver with built-in decoders.
Use an optical (or coaxial) digital audio cable to connect the DV-CP706’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on your AV receiver, as shown.
Optical digital cable
OPTICAL
OPTICAL COAXIAL
Connect one or the other
COA
XIAL
Coaxial digital cable
(supplied)
Signal flow
AV component with
Dolby Digital/DTS decoder
Notes:
• Make sure that the Digital/HDMI Audio Out setting
on the Audio menu is set to All (see page 46). Other-
wise, you won’t get surround sound.
• Also refer to the connection information supplied with your AV receiver or decoder.
• When playing Dolby Digital or DTS source material, be sure to select Dolby Digital or DTS decoding, respectively, on your AV receiver or decoder. See the relevant manuals.
• You can experience Dolby Digital only with DVDs that bear the Dolby Digital logo. Likewise, you can experience DTS only with DVDs or CDs that bear the
DTS logo.
Connecting a Stereo Amp
This section explains how to connect the DV-CP706 to a stereo amp for better sound quality than that of most
TVs. This is ideal for playing your audio CDs and MP3/
WMA discs in the DV-CP706. DVD-Video discs will sound better too.
DV-CP706̲En.book Page 21 Wednesday, July 2, 2008 10:25 AM
Connecting the DV-CP706 —Continued
Analog Connection
Use an RCA/phono audio cable to connect the
DV-CP706’s ANALOG AUDIO OUTPUTs to a pair of analog audio inputs on your stereo amp, as shown.
Signal flow
L
R
ANALOG
INPUT
(white) (red)
RCA/phono cable
(white) (red)
AUDIO
OUTPUT
ANALOG
L
R
Note:
• When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant digital noise, which may damage your equipment.
Digital Connection
Use an optical (or coaxial) digital audio cable to connect the DV-CP706’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on your stereo amp, as shown.
Signal flow
OPTICAL
COA
XIAL converted and output as PCM. DTS signals will not be output at all.
• Never connect the DV-CP706 to the AC-3RF input on a Dolby Digital receiver. The AC-3RF format is not supported by the DV-CP706.
Connecting a Component with an
HDMI Input
This section shows how to connect the DV-CP706 to an
AV receiver, HDTV, or projector with an HDMI input.
What is HDMI?
HDMI (High Definition Multimedia Interface) is a new connection format that can carry uncompressed, standard or high definition digital video and up to eight channels of digital audio. Until now, several separate video and audio cables have been required to connect AV components together. With HDMI, a single cable is all that’s necessary to achieve the best picture and audio quality.
HDMI video is compatible with DVI (Digital Visual
Interface). To send HDMI video to a DVI input requires an HDMI-to-DVI cable. The DV-CP706 supports HDCP
(High-bandwidth Digital Content Protection), and for an
HDMI-to-DVI connection to work, the other component must also support it. Note that this may not work with some DVI components.
Using HDMI
Use the HDMI cable to connect the DV-CP706’s HDMI
OUT to an HDMI input on your AV receiver. Alternatively, you can connect the DV-CP706 directly to the
HDMI input on your TV.
Connect one or the other
OPTICAL
COAXIAL
Optical digital cable
Coaxial digital cable
(supplied)
Signal flow
HDMI cable or
AV receiver
HDMI
IN
HDMI
IN
HDTV,
projector
Notes:
• Be sure to set the Audio menu, Digital/HDMI Audio
Out setting to “PCM” (see page 46). Otherwise an
unpleasant digital noise may be heard, which may damage your equipment.
• When the Audio menu, Digital/HDMI Audio Out setting is set to “PCM,” Dolby Digital signals will be
HDMI HDMI
IN HDTV,
projector
21
DV-CP706̲En.book Page 22 Wednesday, July 2, 2008 10:25 AM
Connecting the DV-CP706 —Continued
Notes:
• The DV-CP706 supports HDCP (High-bandwidth
Digital Content Protection), a protection system for digital video. HDMI components that you connect to the DV-CP706 must also support HDCP.
• The DV-CP706 supports HDMI (High-Definition
Multimedia Interface) Specification Information Version 1.0.
HDMI & the DV-CP706
■ Video
The DV-CP706’s HDMI OUT supports the following video resolutions:
• 720 x 480i 60 Hz
• 720 x 480p 60 Hz
• 720 x 576i 50 Hz (Australian model only)
• 720 x 576p 50 Hz (Australian model only)
• 1280 x 720p 50/60 Hz
• 1920 x 1080i 50/60 Hz
• 1920 x 1080p 50/60 Hz
If the connected HDTV or projector doesn’t support a resolution, you may get no picture.
On the DV-CP706, you can select a resolution suitable for use with the connected HDTV or projector (see
■
Audio Formats
The DV-CP706’s HDMI OUT supports the following audio formats:
• PCM (48 kHz, 44.1 kHz, 96kHz)
• Dolby Digital
• DTS
If your TV only supports HDMI digital audio up to
48 kHz, change the Linear PCM Out setting to Down
If your TV doesn’t support Dolby Digital, set the Digital/
HDMI Audio Out setting to PCM (see page 46).
If your TV doesn’t support DTS, the DV-CP706 will not be able to play DTS format audio or soundtracks. In this case, on your DVD-Video disc’s audio setup menu, select an audio format other than DTS.
RIHD (CEC)
The DV-CP706 supports RIHD (Remote Interactive over
HDMI), which is Onkyo’s implementation of CEC
(Consumer Electronics Control), which allows integrated system control over HDMI and is part of the
HDMI standard. In addition to Onkyo AV components, it allows interoperability with CEC-compatible AV components and TVs made by other manufacturers.
To use RIHD, make sure that CEC is turned on on your other components (e.g., TV, AV receiver)
Connecting -compatible
Components
L
R
IN
AUDIO
OUTPUT
ANALOG
L
R
AV receiver
REMOTE
CONTROL
• The remote controller supplied with Onkyo AV receiver or amplifiers can be used to control the
DV-CP706.
• The function of the upper and lower connectors are the same. Connect to either one.
• Connecting an cable only does not make the system operational. You must also connect the audio cables as well.
• For remote control operation, you must make an analog RCA connection between your DV-CP706 and the other AV component, even if they are connected digitally.
• If you’re using RIHD, do not connect anything to the
RI connectors.
22
DV-CP706̲En.book Page 23 Wednesday, July 2, 2008 10:25 AM
Powering Up & Setting Up the DV-CP706
ON/STANDBY
STANDBY indicator
3
Remote controller
To turn on the DV-CP706, press the [ON/STANDBY] button (or the remote controller’s [ON] button).
The DV-CP706 comes on, the display lights up, and the STANDBY indicator goes off.
To turn off the DV-CP706, press the
[ON/STANDBY] button (or the remote controller’s [STANDBY] button). The
DV-CP706 enters Standby mode and the STANDBY indicator comes on.
ON
STANDBY
ENTER
First Time Setup
The very first time you turn on your DV-CP706, the Initial Setup menu appears on-screen, as shown.
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
4:3 Letter box
4:3 Pan Scan
16:9 Widescreen
√
16:9 Compressed
Powering Up the DV-CP706
Before connecting the power cord, connect all your AV
components (see page 18 to page 22).
Don’t forget to turn on your TV or projector and select the video input to which the DV-CP706 is connected.
If you’re using a hi-fi amp, AV receiver, or surround sound decoder for audio playback, turn that on as well and select the audio input to which the DV-CP706 is connected.
1
2
Connect the supplied power cord to the DV-CP706’s AC INLET.
Plug the other end of the power cord into a suitable wall outlet.
The DV-CP706 enters Standby mode, and the STANDBY indicator comes on.
When you disconnect the power cord, always disconnect it from the wall outlet first, and then the DV-CP706’s AC
INLET.
Here you need to specify the size of your TV (standard
4:3 or widescreen 16:9), specify a HDMI output setting, and select a language for the on-screen setup menus. You can change these settings later by using the on-screen
1
Remote controller
Use the remote controller’s Up/
Down [ ]/[ ] buttons to select a TV shape, and then press [ENTER].
See page 44 for more information on
the TV Shape options.
The HDMI Output Setting menu appears.
2
Remote controller
Select a HDMI Output Setting option, and then press [ENTER].
See page 45 for more information on
the HDMI output options.
The On-Screen Language menu appears.
3
Remote controller
Select a language, and then press [ENTER].
See page 47 for more information on
the language options.
The Initial Setup menu closes.
23
DV-CP706̲En.book Page 24 Wednesday, July 2, 2008 10:25 AM
Powering Up & Setting Up the DV-CP706 —Continued
Your DV-CP706 is now ready for use. See page 25 for
information on loading discs, and page 26 for informa-
tion on selecting and playing discs.
Notes:
• You can cancel the Initial Setup by pressing the
OPEN/CLOSE [ ] button, and complete the settings later by using the on-screen setup menus (see
• You can change the language of the on-screen setup menus, and your preferred languages for DVD menus, foreign language soundtracks, and subtitles individually on the Language page of the on-screen setup
• Depending on the connected CEC-compatible TV, some of the DV-CP706’s settings may change when
RIHD is on.
• Not all DVD-Video discs have multi-language menus, foreign language soundtracks, and subtitles. In such cases, the disc’s default language is used.
Setting the HDMI
RESOLUTION
This section explains how to turn HDMI on and off and change the video resolution when your TV or projector is connected to the HDMI OUT.
1 Press the [RESOLUTION] button to turn HDMI on or off.
If HDMI is off, “HDMI OFF” appears on the display the first time the button is pressed. Press the button again while
“HDMI OFF” is displayed to turn on
HDMI.
To turn off HDMI, press and hold the
[RESOLUTION] button.
2
Remote controller
While “HDMI ON” is displayed, press the [RESOLUTION] button on the remote controller repeatedly to change the HDMI resolution.
The fist button press displays the current resolution on-screen. Press the button again while the resolution is displayed to change the setting. The
DV-CP706 supports the following resolutions:
Auto:
The resolution is automatically set to the native resolution of the TV connected to the HDMI OUT.
480p(480p/576p):
The setting displayed depends on the country in which you purchased the DV-CP706.
720
×
50Hz
480p 60Hz or 720
×
576p
480i(480i/576i):
The setting displayed depends on the country in which you purchased the DV-CP706.
720
×
50Hz
480i 60Hz or 720
×
576i
720p:
1280
×
720p 50/60Hz
1080i:
1920
×
1080i 50/60Hz
1080p:
1920
×
1080p 50/60Hz
Tip:
These settings can also be changed by using the on-
screen setup menus (see page 45).
Note:
• Depending on your setup, you may find that there’s no picture when you turn on HDMI. In this case, you need to check the HDMI resolution setting and your
TV’s settings. If there is no picture, press the [RESO-
LUTION] button repeatedly until the picture reappears.
24
DV-CP706̲En.book Page 25 Wednesday, July 2, 2008 10:25 AM
Basic Playback
DISC SKIP
DISC
SELECT
4
Remote controller
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
See page 26 for information on select-
ing and playing discs.
PLAY
DISC SKIP
OPEN/
CLOSE
Loading & Removing Discs
DVD CD MP3 WMA JPEG
This section explains how to load and remove discs.
1
Remote controller
Press the OPEN/CLOSE [ ] button.
The disc tray opens and the six disc number indicators appear on the display. A circle appears around the number of the disc bay on the right.
Tip: If you press the Play [ ] button, the disc tray will close and playback of the disc in the right bay will start automatically. If there is no disc in that bay, the DV-CP706 will check the other bays and play the first disc it finds.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will close and playback of the selected disc will start automatically.
Notes:
• You can load up to six discs. You don’t have to load all six discs every time.
• When the disc tray is closed, all of the disc indicators appear until the DV-CP706 has checked each bay for the presence of a disc. If a bay is found to have no disc, the corresponding indicator disappears.
• The disc tray can be opened and closed even while the
DV-CP706 is in Standby mode, so you don’t have to turn it on to load or remove your discs. (The disc tray may take several seconds to open.)
• The DV-CP706 supports 8 cm and 12 cm discs. To avoid damaging your discs or DV-CP706, always place discs in the center of the disc bays.
• Only load discs that are supported by the DV-CP706
(see page 8). Don’t load cartridge-type discs.
• To avoid personal injury, keep your hands away from the disc tray as it closes.
• Always use the OPEN/CLOSE [ ] button to open and close the disc tray. Never push the disc tray, and don’t touch it, or obstruct it while it’s opening or closing. Don’t press down on the disc tray while it’s open, and don’t load anything other than supported discs.
Doing so may damage your discs or DV-CP706.
2 Place a disc, label side up, into each bay.
3
Remote controller
Press the [DISC SKIP] button to access the other disc bays.
The disc tray turns counterclockwise two bays at a time.
Press the remote controller’s DISC
SKIP [+] button to turn the disc tray counterclockwise. Press the DISC
SKIP [–] button to turn it clockwise.
25
DV-CP706̲En.book Page 26 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
DISC SKIP
DISC SKIP
DISC
SELECT
OPEN/
CLOSE
Loading Discs During Playback
DVD CD MP3 WMA JPEG
This section explains how to load and remove discs without stopping playback.
1
Remote controller
Press the OPEN/CLOSE [ ] button.
The disc tray opens.
The disc that’s currently playing remains inside the DV-CP706 and its disc bay is empty and won’t come to the front. To remove this disc you must stop playback before pressing the
OPEN/CLOSE [ ] button.
2
Remote controller
Load or remove discs as required, and press the [DISC
SKIP] button to access the other disc bays.
Selecting Discs
DVD CD MP3 WMA JPEG
The section explains how to select loaded discs.
Use the DISC SELECT buttons to select loaded discs.
On the display, the number of the current disc has a circle around it.
What happens next depends on the type of disc you selected, as follows:
DVD-Video:
Typically a menu appears on-
Audio CD:
Playback starts automatically.
MP3/WMA/JPEG:
Playback starts automatically.
Note:
• Disc contains different types of file does not start playback autoamtically.
Notes:
• The type of disc currently selected is shown on the dis-
play: DVD, or CD (see page 13).
• You can select discs while the DV-CP706 is stopped or during playback.
• You can use the [DISC SKIP] button to skip the current disc and start the next disc. If disc #6 is the current disc, disc #1 will be selected next.
26
3
Remote controller
When you’ve finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
Playback of the current disc continues uninterrupted until you either stop playback or select another disc.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will close, playback of the current disc will stop, and playback of the newly selected disc will start automatically.
DV-CP706̲En.book Page 27 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
STOP
PAUSE
PLAY
■ Pause
Remote controller
To pause playback, press the
Pause [ ] button.
Playback pauses and the Pause cator appears on the display.
indi-
To resume playback, press the Play [ ] button.
Playback resumes and the Pause indicator disappears.
■ Stop
Remote controller
To stop playback, press the Stop
[ ] button.
Playback stops and the Play tor disappears.
indica-
ENTER
Starting, Pausing & Stopping
Playback
DVD
This section explains how to start, pause, and stop playback.
■ Start
Remote controller
To start playback, press the Play
[ ] button.
Playback starts and the Play tor appears on the display.
indica-
If the disc is a DVD-Video, you may need to start playback from a menu (see
Notes:
• During playback, you can select chapters or tracks by using the Next [ ] and Previous [ ] buttons.
• When you stop playback of a DVD-Video disc, the
DV-CP706 remembers the point at which playback was stopped. To resume playback from that point, press the Play [ ] button. To cancel the Resume function, press the Stop [ ] button again. The Resume function is reset when another disc is selected.
• With the Last Memory function you can resume playback from a specific point even if the disc has been
• Do not move the DV-CP706 or subject it to vibration during playback. Doing so may damage your discs or
DV-CP706.
• Prolonged display of the same picture or menu may cause irreparable damage to your TV screen, known as screen burn-in . To prevent this, don’t keep playback paused for too long and always press the Stop [ ] button when you’ve finished playing a DVD-Video disc.
Your DV-CP706 features a screen saver to protect
your TV from the effects of burn-in (see page 47).
With some DVD-Video discs, you may experience picture noise that is not normally visible with regular TV broadcasts. This is usually because DVD-Video discs uses a lot of high-resolution video data. The amount of noise, if any, will depend on your particular TV and the problem can sometimes be alleviated by turning down your TV’s sharpness control.
27
DV-CP706̲En.book Page 28 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
AUDIO
SUBTITLE
Notes:
• Not all DVD-Video discs have menus.
• Menu operation varies from disc-to-disc. See the disc’s sleeve notes for details.
• On some DVD-Video discs, options such as foreign language soundtracks, subtitles, and audio formats appear on a separate menu called the disc menu, and titles and chapters appear on what’s called the title menu . To display the disc menu, press the [MENU] button. If no menu appears, press the [TOP MENU] button.
• With DVD-Video discs, foreign language soundtracks and audio formats can usually be selected during playback by using the remote controller’s [AUDIO] button
(see page 40). Similarly, subtitles can be selected by
using the remote controller’s [SUBTITLE] button (see
ENTER
STOP
TOP MENU
MENU
PLAY
28
Navigating Disc Menus
DVD
DVD-Video discs usually have an on-screen menu from which you can select titles, chapters, and other options, including foreign language soundtracks, subtitles, and audio formats (e.g., Dolby Digital or DTS).
1 Load and select a DVD-Video disc.
With DVD-Video discs, a menu usually appears automatically. If it doesn’t, try pressing the [TOP MENU] button.
2
Remote controller
Use the remote controller’s navigation [ ], [ ], [ ], [ ] buttons to select items on the menu, and use the [ENTER] button to confirm your selection.
If you select a playback option (e.g., subtitles), another menu of options will typically appear, in which case you use the remote controller’s navigation buttons to select items and the [ENTER] button to confirm your choice.
ENTER
TOP MENU
MENU
RETURN
DV-CP706̲En.book Page 29 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
Using the Disc Navigation Window
CD MP3 WMA JPEG
On the disc navigation window, you can select CD tracks or MP3, WMA, or JPEG files.
1 Load and select an audio CD or
MP3, WMA, or JPEG disc.
The disc navigation window appears.
It may take a while to read the contents of discs that contain many files and folders.
For JPEG discs, press the [MENU] button to open the disc navigation window.
This is the display for an MP3 disc.
1 2
Play
1/10
/MP3 music
1/8
M
P3
M
P3
M
P3
M
P3
001. ROOT
002. MP3 music
003. Onkyo 1
004. Onkyo 2
001. Track01
002. Track02
003. Track03
004. Track04
Disc 4: DATA
00:00:24
Name: Onkyo Title
00:05:06
Repeat
Ramdom
: Off
: Off
00:05:30
Artist Name: Onkyo Artist
3
4
5
A
B
C
D
E
Folder number and file number.
Elapsed time, remaining time, and total time of currently playing song. (Only elapsed time is shown
for WMA files.) (See also page 42.)
Repeat function and Random function status.
For JPEG files, a preview and the file size are displayed here.
Information about the song currently playing (e.g., song title, artist name, album name) is displayed here, if available.
2
Remote controller
Press the Play [ ] button to start playback. Press the Stop [ ] button to stop playback. Press the Pause [ ] button to pause playback and the Play [ ] button to resume it.
For audio CDs:
Use the Up/Down [ ]/[ ] buttons to select a track, and press the Play [ ] button (or [ENTER]) to start playback.
You can select the next or previous track during playback by using the
Next [ ] and Previous [ ] buttons.
3
Remote controller
Press the Previous [ ] button to restart the current track. Press it again to select earlier tracks.
Alternatively, the number button is used to select a track.
For MP3, WMA, and JPEG discs:
To open a folder, use the remote controller’s Up/Down [ ]/[ ] buttons to select it, and then press [ENTER].
Use the Up/Down [ ]/[ ] buttons to select tracks in the open folder.
You can select the next or previous track during playback by using the
Next [ ] and Previous [ ] buttons.
Press the Previous [ ] button to restart the current track. Press it again to select earlier tracks.
Use the Left/Right [ ]/[ ] buttons to select other folders.
To close a folder (i.e., move back up the directory tree), press the [RETURN] button.
When all the tracks in that folder have been played, tracks in the next folder are played.
If the disc contains MP3/WMA files and JPEG files, they are played/displayed in order. JPEG files will be displayed in a slideshow. Press the
[TOP MENU] button to display the first nine pictures at thumbnail-size
(see page 34). Depending on the disc,
the first nine pictures may be displayed automatically.
Press the Stop [ ] button to stop playback.
Notes:
• You can use the Random Playback function to play a
random selection of MP3/WMA files (page 37).
• During random playback, memory playback, or party mode playback, the remote controller’s navigation
[ ], [ ], [ ], [ ] buttons, OPEN/CLOSE [ ] button, and DISC SKIP [+]/[–] buttons cannot be used with the disc navigation window.
• Depending on their size and format, some JPEG files cannot be displayed.
29
DV-CP706̲En.book Page 30 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
PLAY
Number buttons
ENTER
SEARCH
CLR
3
Remote controller
Use the number buttons to specify a chapter or title.
To enter, for example, “2,” press the [2] button.
Step
Disc
Disc 1: DVD
Search
Title
1:DVD-VIDEO Current/Total 2 /
Chapter
3 Current/Total 2 / 22
To enter, for example, “12,” press the
[1] button, followed by the [2] button.
Step
Disc
Disc 1: DVD
Search
Title
1:DVD-VIDEO Current/Total 2 /
Chapter
3 Current/Total 12 / 22
To clear the number, press the [CLR] button.
Use the Left/Right [ ]/[ ] buttons to toggle between Title and Chapter or
Folder and Track.
4
Remote controller
Press the Play [ ] or [ENTER] button to start playback of the specified chapter or title.
During playback, you can select other chapters by using the Next [ ] and
Previous [ ] buttons.
30
Selecting Titles, Chapters & Tracks by
Number
DVD CD MP3 WMA
This section explains how to select titles, chapters, and tracks by number.
1 Load and select a disc.
2
Remote controller
Press the [SEARCH] button.
The Search window appears on-screen, as shown.
This is the display for a DVD-Video disc.
Step
Disc
Disc 1: DVD
Search
Title
1:DVD-VIDEO Current/Total 2 /
Chapter
3 Current/Total 4 / 22
With some DVD-Video discs, you can select only titles, and the Chapter Current/Total information is not displayed.
Some discs won’t allow you to select titles.
For audio CDs, you can select tracks.
For MP3 and WMA discs, you can select tracks and folders.
Notes:
• You can also select chapters by using the number buttons, without opening the Search window.
• If the current DVD-Video disc contains only one title, you won’t be able to select other titles. Similarly, if it contains no chapters, you won’t be able to select chapters.
• DVD-Video discs usually have on-screen menus for
selecting titles and chapters (see page 28).
• With some discs you may not be able to select titles and chapters as described here.
DV-CP706̲En.book Page 31 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
Number buttons
PLAY
SEARCH
2
Remote controller
Use the number buttons to enter a time.
To enter, for example, 1 hour, 25 minutes, 30 seconds, press the [1], [2], [5],
[3], and [0] buttons.
Disc
1: DVD-VIDEO
Search
Title
1 : 25 : 30
To enter, for example, 2 minutes, 15 seconds, press the [2], [1], and [5] buttons.
Disc
1: DVD-VIDEO
Search
Title
0 : 02 : 15
3
Remote controller
Press the Play [ ] button to locate the specified point.
Playback starts from the specified point.
Locating Specific Points in Time
DVD CD
With the Time Search function you can locate specific points in time.
1
Remote controller
Press the [SEARCH] button twice.
The Search window appears on-screen, as shown.
Disc
1: DVD-VIDEO
Search
Title
-- : -- : --
Notes:
• The Time Search function works only within the currently playing title (DVD-Video) or track (audio CD).
For example, if the current title is one hour long and you enter the time 1 hour, 30 minutes, nothing will happen.
• In some cases, playback may start from a slightly different point to the one you specified.
• Time Search may not work with some discs.
• You can’t use the [SEARCH] button during random playback, memory playback, or party mode playback.
31
DV-CP706̲En.book Page 32 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
Number buttons
PAUSE
PLAY
SEARCH
■ Fast reverse
Remote controller
During playback, press the Fast
Reverse [ ] button to start fast reverse.
Playback reverses and “x 2” appears on-screen.
To change the fast-reverse speed, press the Fast Reverse [ ] button repeatedly to select: x 2, x 4, x 8, or x 16.
Remote controller
To resume normal playback, press the Play [ ] button.
Note:
• No sound is output during fast forward or fast reverse of a DVD-Video, MP3, or WMA disc.
Frame-by-Frame Playback
DVD
With the Frame-by-Frame Playback function, you can forward playback one frame at a time.
1
Remote controller
Press the Pause [ ] button to pause playback, and then press the Pause [ ] button repeatedly to forward playback one frame at a time.
2
Remote controller
To resume normal playback, press the Play [ ] button.
Fast Forward & Reverse
DVD CD MP3 WMA
The section explains how to fast forward and reverse.
■ Fast forward
Remote controller
During playback, press the Fast
Forward [ ] button to start fast forward.
Playback fast forwards and “x 2” appears on-screen.
To change the fast-forward speed, press the Fast Forward [ ] button repeatedly to select: x 2, x 4, x 8, or x 16.
Remote controller
To resume normal playback, press the Play [ ] button.
Notes:
• No sound is output during frame-by-frame playback.
• Prolonged display of the same picture or menu may cause irreparable damage to your TV screen, known as screen burn-in . To prevent this, don’t display the same frame for too long. Your DV-CP706 features a screen saver to protect your TV from the effects of burn-in
32
DV-CP706̲En.book Page 33 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
Slow-motion Playback
DVD
With the Slow-motion Playback function you can watch a scene slowly either forward or backward.
■ Forward slow motion
Remote controller
During playback, press the
SLOW [ ] button.
Forward slow-motion playback starts and “ 1/2” appears on-screen.
To change the slow-motion speed, press the SLOW Forward [ ] button repeatedly to select: 1/2, 1/4, 1/6, or 1/8.
■ Backward slow motion
During playback, press the
SLOW [ ] button.
Backward slow-motion playback starts and “ 1/2” appears on-screen.
Remote controller
To change the slow-motion speed, press the SLOW Back [ ] button repeatedly to select: 1/2, 1/4, 1/6, or 1/8.
■ Resume playback
To resume normal playback, press the Play [ ] button.
Remote controller
Notes:
• No sound is output during slow-motion playback.
• The slow-motion speed indication is only approximate, and the actual speed will vary from disc to disc.
DIMMER
Adjusting the Display Brightness
You can adjust the brightness of the display as follows.
1 Press the [DIMMER] button repeatedly to cycle through the following options:
Disc tray light off + normal brightness
Disc tray light off + dim
Disc tray light off + dimmer
Disc tray light on + normal brightness
Notes:
• When the display brightness on another Onkyo AV component connected via is changed, the “disc tray light off” option might not work.
• Even if you selected the “disc tray light off” option, the disc tray light will come on when the disc tray is opened.
• The display brightness cannot be adjusted via RIHD.
33
DV-CP706̲En.book Page 34 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
STOP
ENTER
TOP MENU
MENU
PAUSE
PLAY
2 You can use the following functions during the slideshow:
To display the next or previous picture, use the Next [ ] and Previous [ ] buttons.
To turn a picture upside down, use the
Up/Down [ ]/[ ] buttons (not while zoomed in).
To rotate a picture clockwise or counterclockwise, use the Left/Right [ ]/
[ ] buttons (not while zoomed in).
To pause the slideshow, press the [ button. Press the Play [ ] button to resume.
]
To zoom in or out, use the Fast Forward
[ ] and Fast Reverse [ ] buttons.
Use the Left/Right [ ]/[ ] and Up/
Down [ ]/[ ] buttons to move around the picture while zoomed in. To cancel the zoom, press the Play [ ] button.
To return to the navigation window, press the [MENU] button.
To view the thumbnail display, press the [TOP MENU] button.
Use the Next [ ] and Previous [ ] buttons to display the next or previous thumbnail page.
3
Remote controller
To stop the slideshow, press the
Stop [ ] or [MENU] button.
Depending on the type of JPEG disc, either the first nine pictures appear in thumbnail-size or the disc navigation window appears.
The slideshow stops automatically when all pictures have been displayed.
Using JPEG CDs
The DV-CP706 supports JPEG CDs, so you can view your photos on TV either individually or as a slideshow.
1 Load and select a CD containing
JPEG pictures.
Use the [ ], [ ], [ ], [ ] buttons to select a picture, and then press the Play
[ ] or [ENTER] button to start the slideshow.
Notes:
• You can view JPEG images in high definition by
changing the HD JPEG mode setting (see page 45).
• The Memory and Random functions cannot be used with JPEG files.
• Chain mode cannot be used with JPEG files.
• The Zoom function cannot be used in HD JPEG mode.
34
DV-CP706̲En.book Page 35 Wednesday, July 2, 2008 10:25 AM
Basic Playback —Continued
CHAIN MODE
Using Chain Mode
DVD CD MP3 WMA
With the Chain mode function, you can play all discs, all
DVD-Video discs, or all audio CDs and MP3/WMA discs consecutively as if they were one big disc.
1
Remote controller
Press the [CHAIN MODE] button repeatedly to select CD, DVD, or
ALL.
The CHAIN MODE indicator flashes on the display.
ALL:
All discs are played consecutively.
DVD:
All DVD-Video discs are played consecutively.
CD:
All audio CDs, including MP3 and
WMA discs, are played consecutively.
To cancel Chain mode, press the
[CHAIN MODE] button repeatedly until the CHAIN MODE indicator disappears.
2
Remote controller
While the CHAIN MODE indicator is flashing, press the Play [ ] button to start Chain mode playback.
The Chain mode function will be cancelled if you do not start playback within 5 seconds of pressing the
[CHAIN MODE] button.
PARTY MODE
Using Party Mode
CD MP3 WMA
With the Party mode function, you can play all of the audio CDs and MP3/WMA discs in random order.
Remote controller
Press the [PARTY MODE] button.
The CHAIN MODE and CD indicators appear.
All loaded audio discs, including MP3 and WMA discs, are played in random order.
Press the Stop [ ] button to stop Party mode playback and cancel the Party mode function.
Note:
• JPEG files are skipped during Chain mode playback.
• With the DVD and All Chain modes, DVD-Video menus are ignored and titles are played automatically.
This may not work with some discs.
• You can’t use the repeat functions with Chain mode.
• You can use the Random function with Chain mode.
35
DV-CP706̲En.book Page 36 Wednesday, July 2, 2008 10:25 AM
Advanced Playback
REPEAT
Repeat Playback
DVD CD MP3 WMA JPEG
With the Repeat Playback function you can play the current disc, title, chapter, track, or folder of MP3/WMA files over-and-over again.
1
Remote controller
Press the Play [ ] button to start repeat playback.
RANDOM
PLAY
2
Remote controller
Press the [REPEAT] button repeatedly to select a repeat option.
The currently selected repeat option appears on-screen and “REPEAT” appears on the display.
The available options depend on the current disc type, as follows:
DVD-Video:
Chapter, Title, 1 Disc, All Discs.
Audio CD:
Track, 1 Disc, All Discs.
MP3/WMA/JPEG:
Track, Folder, 1 Disc, All Discs.
3
Remote controller
To cancel Repeat Playback, use the [REPEAT] button to select
Off.
SEARCH
REPEAT
A-B
Notes:
• Repeat Playback may not work with some
DVD-Video discs.
• If you press the [REPEAT] button while the Memory
Playback function is on (see page 38), the current
memory list will play repeatedly.
• The Repeat function cannot be used with Chain mode or Party mode.
• If you select another disc, repeat playback is cancelled.
• The Repeat function can be used in combination with
the Random function (see page 37).
36
DV-CP706̲En.book Page 37 Wednesday, July 2, 2008 10:25 AM
Advanced Playback —Continued
A–B Repeat Playback
DVD CD MP3 WMA
With the A–B Repeat Playback function you can play a specified section over-and-over again.
1
Remote controller
During playback, press the [A–B] button to set the A point (i.e., the start of the section you want to repeat).
“Repeat A–” appears on-screen.
2
Remote controller
Press the [A–B] button again to set the B point (i.e., the end of the section you want to repeat).
Playback repeats between the A and B points, and “Repeat A–B” appears onscreen.
3
Remote controller
To cancel A–B Repeat Playback, press the [A–B] button to select
Off.
3
Remote controller
Audio CD:
1 Disc, All Discs.
MP3/WMA:
Folder (files in subfolders are not played), 1 Disc, All Discs.
With the “Title” option, chapters within the current title are played at random.
With the “1 Disc” option, all titles, chapters, tracks, and folders on the current disc are played at random.
If you press the [RANDOM] button during playback, random playback begins after the current chapter, or track has finished.
Press the Play [ ] button to start random playback.
Random playback starts.
4
Remote controller
To cancel random playback, use the [RANDOM] button to select
Off.
Notes:
• A–B Repeat Playback may not work with some
DVD-Video discs.
• In some cases, the A and B points may be at slightly different points to the ones you specified.
Random Playback
DVD CD MP3 WMA
With the Random Playback function you can enjoy a random selection of discs, titles, chapters, tracks, or
MP3/WMA folders.
1 Select a disc.
2
Remote controller
Press the [RANDOM] button repeatedly to select a random option.
The currently selected random option appears on-screen.
The available options depend on the current disc type, as follows:
DVD-Video:
Title, 1 Disc, All Discs.
Notes:
• To select the next random disc, title, chapter, track, or
MP3/WMA folder during random playback, press the
Next [ ] button.
• Random playback may not work with some
DVD-Video discs.
• Random playback cannot be used with the Memory
Playback function.
• You can’t use the [SEARCH] button during random playback.
• During random playback, the remote controller’s navigation [ ], [ ], [ ], [ ] buttons and number buttons cannot be used with the disc navigation window.
• If you select another disc, random playback is cancelled, except when the random option is set to “All
Disc,” in which case playback continues.
• The Random Playback function can be combined with the Repeat Playback function.
37
DV-CP706̲En.book Page 38 Wednesday, July 2, 2008 10:25 AM
Advanced Playback —Continued
Number buttons
MEMORY
CLR
LAST
MEMORY
3
Remote controller
Press the [ENTER] button.
The new item is added to the memory list as step 01.
No.
Disc
1
01
02
03
04
05
-
-
1
-
-
Memory List
Title/Folder
Chapter/Track 001 / 002
001 / 002
--- / ---
--- / ---
--- / ---
--- / ---
Chapter/Track
Current/Total --- / 008
005 / 008
--- / ---
--- / ---
--- / ---
--- / ---
4 Repeat steps 2 and 3 to add more items to the memory list.
New items will be added to the memory list as steps 02, 03, and so on.
5
Remote controller
To play the memory list, press the Play [ ] button.
ENTER
6
Remote controller
To stop playback, press the Stop
[ ] button.
38
Memory Playback
DVD CD MP3 WMA
With the Memory Playback function, you can create your own memory list of up to 32 titles, chapters, or tracks.
1
Remote controller
Press the [MEMORY] button.
The Memory List window appears onscreen, as shown.
No.
Disc
1
01
02
03
04
05
-
-
-
-
-
Memory List
Title/Folder
Chapter/Track 001 / 002
Chapter/Track
Current/Total --- / 008
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
--- / ---
The top row ( ) is used to enter disc, title/folder, and chapter/track numbers.
Steps in the memory list are numbered.
2
Remote controller
Enter the disc, title/folder, and chapter/track numbers of the item you want to add to the memory list.
Use the remote controller’s Left/Right
[ ]/[ ] buttons to select the parameters, and use the number buttons to select Title/Folder or Chapter/Track.
The number of the currently selected disc is already entered.
To add all of the titles, folders, chapters, or tracks on the disc, press the [+10] button.
Inserting New Items in the List
Remote controller
To insert a new item into the memory list, use the Up/Down
[ ]/[ ] buttons to select the step before which you want to insert the new item, and then press the
[ENTER] button.
No.
Disc
1
01
02
03
04
05
1
-
1
3
-
Memory List
Title/Folder
Chapter/Track 001 / 002
001 / 002
--- / ---
001 / 002
001 / ---
--- / ---
Chapter/Track
Current/Total --- / 008
005 / 008
--- / ---
003 / 008
--- / 008
--- / ---
Remote controller Enter the disc, title/folder, and chapter/track numbers of the item to be inserted.
Press the [ENTER] button.
The new item is inserted into the memory list and subsequent items move down the list.
DV-CP706̲En.book Page 39 Wednesday, July 2, 2008 10:25 AM
Advanced Playback —Continued
Deleting Items from the List
Remote controller
To delete an item, use the Up/
Down [ ]/[ ] buttons to select it, and then press the [CLR] button.
The item is deleted and subsequent items move up the list.
1
Remote controller
During playback, press the
[LAST MEMORY] button.
The last memory point for the disc is stored, the LAST indicator appears, and “LAST MEM” appears on the display.
If the [LAST MEMORY] button is pressed again, the last memory point will be updated.
2
Remote controller
To stop playback, press the Stop
[ ] button once or twice.
At this point you may choose to play another disc, or to turn off the DV-CP706.
Editing Steps
1
Remote controller
2
Remote controller
To edit a step, use the Up/Down
[ ]/[ ] buttons to select it, edit the disc, title/folder, and chapter/ track numbers, and then press the [ENTER] button.
To close the Memory Play Setup window, press the [RETURN] button.
• Deleting the memory list:
Press the Stop button to stop playback of the memory list, and while “Memory” is displayed on-screen, press the [CLR] button. The memory list is deleted and
“Memory Clear” is displayed on-screen.
Note:
• The entire memory list is cleared when the DV-CP706 is set to Standby.
Using Last Memory
DVD
With the Last Memory function you can resume playback from where you left off even if another disc has been selected or the disc has been removed. Last Memory also remembers the soundtrack and subtitle languages that you were using.
3
Remote controller
To resume playback, select the disc and press the Play [ ] button.
The Last Memory dialog box appears, as shown.
Last Memory is set.
Start playback from memory location ?
Yes No Memory Clear
4
Remote controller
To resume playback from last memory point, select “Yes,” and then press [ENTER].
To start playback from the beginning, select “No,” and then press [ENTER].
To start playback from the beginning and delete the last memory point, select
“Memory Clear,” and then press
[ENTER].
Notes:
• The Last Memory function can store the settings for up to six DVD-Video discs. When you set the Last
Memory function for a seventh disc, the first disc’s settings are lost.
• The Last Memory function will not work while a menu is being displayed on-screen.
• The Last Memory function may not work with some
DVD-Video discs.
• Even if you select another disc, or inadvertently turn off the DV-CP706 during playback, you can resume playback from the same point when you select the disc again.
39
DV-CP706̲En.book Page 40 Wednesday, July 2, 2008 10:25 AM
40
Advanced Playback —Continued
AUDIO
ANGLE
SUBTITLE
Selecting Camera Angles
DVD
Some DVD-Video discs feature multiple camera angles that allows you to view scenes from different angles. If the currently playing DVD-Video disc features multiple camera angles, the camera indicator appears on the display. Such a disc usually has the multiple camera angle logo ( ) printed on its sleeve notes.
Remote controller
Press the [ANGLE] button repeatedly to cycle through the available camera angles.
The number of the currently selected camera angle appears on-screen. For example, on a disc with three camera angles, you’d see 1/3, 2/3, and 3/3.
Notes:
• With some DVD-Video discs you may not be able to select different camera angles even though the camera
indicator is displayed.
• With some DVD-Video discs you can select camera angles from a menu.
• Some DVD-Video discs won’t allow you to select different camera angles while playback is paused.
Selecting Languages & Audio
Formats
DVD
Some DVD-Video discs feature soundtracks in several languages and audio formats (e.g., Dolby Digital or
DTS). Music DVD-Video discs sometimes feature soundtracks in several audio formats, such as PCM or
Dolby Digital 5.1. See the disc’s sleeve notes for details.
Remote controller
During playback, press the
[AUDIO] button repeatedly to cycle through the available soundtracks.
The name of the selected soundtrack appears on-screen for several seconds.
Notes:
• With DVD-Video discs, when you stop playback and
cancel the Resume function (see page 27), or select
another disc, the soundtrack language will revert to
your default language (see page 47), or the disc’s
default language.
• With some discs, selecting another soundtrack may cause the picture to skip momentarily.
• With some DVD-Video discs you need to select soundtracks from a menu, and you may not be able to select other soundtracks during playback.
Selecting Subtitles
DVD
Some DVD-Video discs feature subtitles in several languages. See the disc’s sleeve notes for details.
Remote controller
During playback, press the [SUB-
TITLE] button repeatedly to cycle through the available subtitles.
The name of the selected subtitle appears on-screen for several seconds.
To turn off subtitles, use the [SUBTI-
TLE] button to select Off.
Notes:
• With DVD-Video discs, when you stop playback and
cancel the Resume function (see page 27), or select
another disc, the subtitle language will revert to your
default subtile language (see page 47), or the disc’s
default subtitle language.
• With some DVD-Video discs you can select subtitles from a menu, and you may not be able to select subtitles during playback.
• To check the subtitle language currently selected, press the [SUBTITLE] button once. The current setting will appear on-screen for several seconds.
DV-CP706̲En.book Page 41 Wednesday, July 2, 2008 10:25 AM
Advanced Playback —Continued
ENTER
ZOOM
Zooming
DVD-V JPEG
With the Zoom function you can enlarge any part of the picture.
1
Remote controller
During playback or paused, press and hold the [ZOOM] button.
“Zoom x 1.0” appears on-screen.
2
Remote controller
Press the [ZOOM] again repeatedly to Zoom in.
The number of zoom steps available depends on the resolution of the disc or file.
After the maximum zoom, the picture returns to its normal size.
3
Remote controller
To see other areas of the picture while zoomed, use the remote controller’s arrow [ ], [ ], [ ],
[ ] buttons.
Notes:
• During a JPEG slideshow, you can use the Fast Forward [ ] and Fast Reverse [ ] buttons to zoom in and out.
• The Zoom function may not work with some DVDs.
• The Zoom function can also be used while playback is paused or during slow-motion playback.
• The Zoom function cannot be used with HD JPEG.
41
DV-CP706̲En.book Page 42 Wednesday, July 2, 2008 10:25 AM
Advanced Playback —Continued
DISPLAY
DISPLAY
Displaying Information
DVD
You can display various information about the current disc, title, chapter, or track as follows.
1
Remote controller
During playback, press the [DIS-
PLAY] button.
Various information appears on-screen.
The operating status (e.g., Stop, Play,
Resume), disc number, and disc type information is displayed along the top of the screen.
DVD-Video:
Current title number, total number of titles on disc, elapsed title time, remaining title time, total title time, selected soundtrack, selected subtitle, and the number of available camera angles.
2
Remote controller
Press the [DISPLAY] button again to see more information.
DVD-Video: Current chapter number, total number of chapters in title, elapsed chapter time, remaining chapter time, total chapter time.
3
Remote controller
Press the [DISPLAY] button again to cancel the information display.
■ For audio CDs:
Pressing the [DISPLAY] button repeatedly during playback will display the following information:
• Elapsed track time (on-screen, the elapsed track time and remaining track time will be displayed)
• Remaining track time
• Elapsed disc time (on-screen, the elapsed disc time and remaining disc time will be displayed)
• Remaining disc time
■ For MP3 and WMA discs:
Pressing the [DISPLAY] button repeatedly during playback will display the following information:
• Elapsed track time
• Track name
• Folder name
• Total number of folders
42
DV-CP706̲En.book Page 43 Wednesday, July 2, 2008 10:25 AM
Configuring the DV-CP706
This chapter explains the various functions and settings of the on-screen setup menus.
Functions and settings are arranged into six menus: Picture , Audio , Language , Display , Operation Setting , and
Initial Setup .
The following table lists all the functions and settings, with a brief description and page number where you can find full details.
Menu
Picture
Audio
Language
Display
Operation
Setting
Initial Setup
Setting
PAL Output Setting (Australian model only)
Description
Select the aspect ratio that matches your TV.
Stretch the picture to fit your TV screen.
Turn HDMI video output on or off.
Set the component video output to progressive or interlaced.
Select the video resolution for the HDMI OUT.
For displaying JPEG images at a high resolution on a HDTV.
Choose a video black level.
Adjust the picture brightness.
Adjust the picture sharpness.
Convert the disc’s video format.
Dynamic Range Control
Security Code
HDMI Control
Power Control
Direct Change
TV Shape
HDMI Output Setting
Settings for the digital signal output by the optical, coaxial, and
HDMI digital audio outputs.
Select whether or not the DV-CP706 downsamples 96 kHz digital audio.
Set the Dynamic Range function.
Select a language for the on-screen setup menus and messages.
Select your preferred language for disc menus.
Select your preferred language for soundtracks.
Select your preferred language for subtitles.
Turn on or off on-screen messages and indicators.
Select a color for on-screen setup menus and messages.
Select a background color for when playback is stopped.
Set the Screen Saver function.
Set the Parental Lock function.
Change a security code for use with parental lock.
Turn on or off RIHD control over HDMI.
Turn on or off RIHD power control over HDMI.
Turn on or off RIHD direct change over HDMI.
Sets the Auto power off function.
This menu appears automatically the very first time you turn on your DV-CP706. (These settings are available in other menus.)
On-Screen Language
Page #
43
DV-CP706̲En.book Page 44 Wednesday, July 2, 2008 10:25 AM
Configuring the DV-CP706 —Continued
6
Remote controller
When you’ve finished, press the
[SETUP] button again.
The on-screen setup menu closes.
ENTER
44
SETUP
Using the On-screen Setup Menus
This section explains how to use the on-screen setup menus.
1 Turn on your DV-CP706 and TV.
On your TV, select the video input to which the DV-CP706 is connected.
2
Remote controller
Press the [SETUP] button.
The on-screen setup menu appears, as shown.
3
Remote controller
4
Remote controller
Picture
TV Shape
View Mode
HDMI Output Setting
Progressive Setting
HD Resolution
HD Jpeg mode
Video Black Level
Brightness
Sharpness
: 16:9 Compressed
: Normal
: On
: Interlace
: Auto
: Off
: Light
: 4
: 4
Use the remote controller’s navigation buttons to navigate the menus.
Use the Left/Right [ ]/[ ] buttons to move left or right. Use the Up/Down
[ ]/[ ] buttons to move up or down.
When you’ve selected an item, press the [ENTER] button to see the available options.
5
Remote controller
Use the navigation buttons to select the options, and press the
[ENTER] button to confirm your selection.
Press the [RETURN] button to go back one step.
Picture Menu
TV Shape
With this setting you can select a picture format to match the aspect ratio of your TV.
4:3 Letter box: Choose this option if you have a standard TV
(4:3 aspect ratio). When you watch widescreen DVD-Video movies, the entire picture will be visible and there will be black bars at the top and bottom of the screen, as shown.
4:3 Pan & Scan: Choose this option if you have a standard TV
(4:3 aspect ratio) and want to use the full height of the screen when watching widescreen
DVD-Video movies. In order to use the full height of the screen, the picture will be cropped on both sides, as shown. This option won’t work with discs that don’t support pan and scan.
16:9 Widescreen: Choose this option if you have a widescreen TV (16:9 aspect ratio). Depends on TV, the picture appears stretched when watching programs in 4:3 format.
16:9 Compressed (default):
Choose this option if you have a widescreen TV (16:9 aspect ratio) and the picture appears stretched when watching programs in 4:3 format. Some widescreen TVs have a setting to correct this. If your TV doesn’t, and
4:3 programs appear stretched, select this option to correct the problem.
Notes:
• This setting does not apply to DVD menus.
• When the HDMI OUT signal is at a resolution of
720p, 1080i, or 1080p programs in 4:3 format will appear stretched, so we recommend that you select the
16:9 Compressed option.
• With some DVD-Video discs this setting may have no effect. See the disc’s sleeve notes to see which picture format is used.
DV-CP706̲En.book Page 45 Wednesday, July 2, 2008 10:25 AM
Configuring the DV-CP706 —Continued
View Mode
With this setting you can adjust the aspect of the picture so that it fits your TV screen. Due to your TV’s aspect ratio setting and the DVD’s aspect ratio, black bars may appear above and below the picture or at the sides and the aspect of the picture may be unsuitable. In this case, use this setting to adjust the aspect of the picture as you like.
Normal (default): The picture is displayed in its original aspect ratio.
View Mode 1: The picture is stretched horizontally to make it fit the height of the screen.
View Mode 2: The picture is stretched vertically to make it fit the width of the screen.
View Mode 3: The picture is stretched horizontally and vertically to make it fit the screen.
Tip:
The view mode can also be changed by using the remote controller’s [ASPECT] button.
Note:
• This setting does not apply to DVD menus.
HDMI Output Setting
With this setting you can turn the HDMI video output on
or off. See page 24 for more information.
On (default): Video is output by the HDMI OUT.
Off: Video is not output by the HDMI OUT.
Progressive Setting
With this setting you can set the component video output to progressive or interlaced. While the HDMI Output Setting is set to On, this setting is fixed at Interlaced and can-
not be changed. See page 24 for more information.
Interlaced: Component video output is interlaced.
Progressive: Component video output is progressive.
Notes:
• When Progressive is selected, no video is output by the composite video, S-Video, and HDMI outputs.
• This setting can also be changed by pressing and holding the Previous [ ] button, and then pressing [ON/
STANDBY] button.
HD Resolution
With this setting you can set the video resolution for the
HDMI OUT.
Auto (default): The resolution is automatically scaled to the preferred resolution of the TV connected to the HDMI OUT.
If Auto is selected but the DV-CP706 doesn’t support the resolution preferred by the TV, the resolution will be 480p/576p.
480i (480i/576i): The setting displayed depends on the country in which you purchased the DV-CP706.
720 x 480i 60 Hz or 720 x 576i 50 Hz
480p (480p/576p): The setting displayed depends on the country in which you purchased the DV-CP706.
720 x 480p 60 Hz or 720 x 576p 50 Hz
720p: 1280 x 720p 50/60 Hz
1080i: 1920 x 1080i 50/60 Hz
1080p: 1920 x 1080p 50/60 Hz
Tip:
When the HDMI Output Setting is set to On, you can also change this setting by using the remote controller’s
[RESOLUTION] button (see page 24).
Note:
• If Auto selected but the DV-CP706 doesn’t support the
TV’s native resolution, the resolution will be 480p/
576p.
HD JPEG mode
If your TV is connected to the HDMI OUT and the
HDMI resolution is set to 720p, 1080i, or 1080p, this setting allows you to display your JPEG pictures in high definition.
On: JPEG pictures displayed in high definition.
Off (default): JPEG pictures displayed as normal.
Notes:
• If your TV is connected to a video output other than the HDMI OUT, or the HD Resolution set to something other than 720p, 1080i, or 1080p, even if this setting is set to On, your JPEG pictures will not be displayed in high definition.
• When using HD JPEG, it may take a while to display each picture. And the Zoom function cannot be used.
Also, on-screen status messages such as “Play” and
“Stop” are not displayed.
45
DV-CP706̲En.book Page 46 Wednesday, July 2, 2008 10:25 AM
Configuring the DV-CP706 —Continued
Video Black Level
With this setting you can adjust the picture blackness of analog video output.
Light: Blacks are lighter, and the entire picture becomes lighter.
Dark: Blacks are darker, and the entire picture becomes darker.
On the North American model, Light is the default setting. On the Australian model, Dark is the default setting.
Brightness
With this setting you can adjust the picture brightness.
1-7: 1 is the darkest. 7 is the brightest. The default brightness is 4 (default).
Sharpness
With this setting you can adjust the picture sharpness.
1-7: 1 is the softest. 7 is the sharpest. The default sharpness is 4 (default).
PAL Output Setting (Australian model only)
With this setting you can specify how the DV-CP706 outputs video signals.
AUTO (default): Use this option to watch PAL and
NTSC format discs. The DV-CP706 does not convert the video format. When you play a PAL disc, the video output will be PAL format. And when you play an NTSC disc, it’ll be NTSC format. Your TV must support NTSC playback in order to watch NTSC format discs.
NTSC: Use this option if you want to play only
NTSC format discs. When you play a PAL disc, the
DV-CP706 will convert PAL format video signals to
NTSC-compatible format.
PAL: Use this option if your TV doesn’t support
NTSC playback, or the picture is distorted when watching NTSC discs. The DV-CP706 will convert
NTSC format video signals to PAL-compatible format.
Note:
• This setting can also be changed by pressing and holding the Next button, and then pressing [ON/
STANDBY] button.
Audio Menu
Digital/HDMI Audio Out
With this setting you can configure the optical, coaxial, and HDMI digital outputs.
All (default): Dolby Digital and DTS signals are output as they are.
PCM: Dolby Digital signals are down mixed to 2 channels and output as PCM.
Off: No digital signals are output.
Linear PCM Out
With this setting you can configure the DV-CP706 to output digital audio with higher sampling rates (e.g.,
96 kHz) as it is or down sample it to 48 kHz.
If the AV component you connect to the DV-CP706’s digital audio outputs supports 96 kHz digital audio, select Down Sample Off. Otherwise, select Down Sample On.
Down Sample On: 96 kHz digital audio is down sampled and output at 48 kHz.
Down Sample Off (default): 96 kHz digital audio is output as it is.
Notes:
• Some copy-protected DVD-Video discs may use
96 kHz digital audio only for A/D conversion to the analog audio outputs.
• With some discs, even if you select Down Sample Off, the digital audio will be down sampled to 48 kHz, and in some cases may not be output by the DV-CP706’s digital audio outputs.
Dynamic Range Control (Dolby Digital only)
With the Dynamic Range Control function you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels—ideal for watching movies late at night when you don’t want to disturb anyone.
On: The dynamic range of Dolby Digital material is compressed.
Off (default): The full dynamic range is preserved.
Notes:
• The impact of the Dynamic Range Control function depends on the Dolby Digital material that you are playing and with some material there will be little or no effect.
• When the DV-CP706 is set to Standby, this function is automatically set to off.
46
DV-CP706̲En.book Page 47 Wednesday, July 2, 2008 10:25 AM
Configuring the DV-CP706 —Continued
Language Menu
On-Screen Language
With this setting you can select a language for the onscreen setup menus and messages.
Select one of the displayed language.
Disc Menu Language
With this setting you can select your preferred language for disc menus. When you play a DVD-Video disc with multiple language disc menus, your preferred language will be selected automatically.
Select “Others” if you can’t find your language dis-
played. See “Selecting Other Languages” on page 49.
Notes:
• Not all DVD-Video discs have menus in multiple languages.
• Even if a DVD-Video disc has menus in multiple languages, this setting may not always work.
• If a DVD has only one menu language, that will be used.
• With some DVD-Video discs you can select languages from a menu.
Audio Language
With this setting you can select your preferred language for soundtracks. When you play a DVD-Video disc with multiple language soundtracks, your preferred language will be selected automatically.
Select “Others” if you can’t find your language dis-
played. See “Selecting Other Languages” on page 49.
Notes:
• Not all DVD-Video discs have soundtracks in multiple languages.
• Even if a DVD-Video disc has soundtracks in multiple languages, this setting may not always work.
• If a DVD has only one soundtrack, that will be used.
• With some DVD-Video discs you can select languages from a menu.
Subtitle Language
With this setting you can select your preferred language for subtitles. When you play a DVD-Video disc with multiple language subtitles, your preferred language will be selected automatically.
Select “No Subtitle” if you don’t want subtitles displayed. Select “Others” if you can’t find your language.
See “Selecting Other Languages” on page 49.
Notes:
• Not all DVD-Video discs have subtitles.
• Even if a DVD-Video disc has subtitles in multiple languages, this setting may not always work.
• If a DVD has only one subtitle language, that will be used.
• With some DVD-Video discs you can select subtitles from a menu.
Display Menu
On-Screen Display
With this setting you can turn on or off on-screen messages, such as “Play,” “Stop,” and “Resume.”
On (default): On-screen messages are displayed.
Off: On-screen messages are not displayed.
On-Screen Display Color
With this setting you can set the color and theme of the
Disc navigation window.
Sapphire (default):
Pearl:
Amethyst:
Garnet:
Background
With this setting you can select the color of the background that’s displayed when the DV-CP706 is stopped.
Blue:
Gray:
Graphic (default): The theme picture specified for the On-Screen Display Color setting is used.
Screen Saver
With the Screen Saver function you can protect your TV against screen burn-in, which can occur when the same image or menu is displayed for a long time.
On (default): Screen saver on.
Off: Screen saver off.
When the Screen Saver function is set to On, and
DVD-Video playback is stopped for 15 minutes, the
Screen Saver function automatically displays a moving image.
Once the screen saver has been activated, you can cancel it by pressing the Play [ ] button.
Note:
• The Screen Saver function also works with audio CDs and MP3/WMA discs.
47
DV-CP706̲En.book Page 48 Wednesday, July 2, 2008 10:25 AM
Configuring the DV-CP706 —Continued
Operating Setting Menu
Parental Lock
With the Parental Lock function you can block access to certain scenes that the authors have flagged as being unsuitable for children.
To use parental lock, you must set a security code.
1 Select “Operation Setting” menu in the setup.
2
Remote controller
Use the navigation [ ]/[ ]/[ ]/[ ] buttons to select “Parental
Lock”, and then press the
[ENTER] button.
The security code input screen appears.
• Not all discs use parental lock. See the disc’s sleeve notes for details.
• Discs with parental lock may cut certain scenes, replace certain scenes with children-friendly scenes, or prevent playback of the entire disc.
Change the Security Code
To change the Security Code, confirm your existing code then enter a new one.
1 Select “Operation Setting” menu in the setup.
2
Remote controller
Use the navigation [ ]/[ ]/[ ]/[ ] buttons to select “Security
Code”, and then press the
[ENTER] button.
The security code input screen appears.
3
Remote controller
Enter the security code using the remote controller’s number buttons, and then press the [ENTER] button.
The default security code is “8888.”
You can change the security code in the next step.
3
Remote controller
Enter the existing security code using the remote controller’s number buttons, and then press the [ENTER] button.
The default security code is “8888.”
Even if a new security code has been entered, the code “8888” can still be used.
Once the security code has been entered, the new security code input screen appears.
4
Remote controller
Use the Up/Down [ ]/[ ] buttons to change the level of parental lock, and then press the [ENTER] button.
At level 8 parental lock is off, with level
1 being the strictest level.
4
Remote controller
Enter the new security code using the remote controller’s number buttons, and then press the [ENTER] button.
The new security code has been set.
48
Notes:
• When entering a security code, you can use the [CLR] button to delete the numbers entered so far, if necessary.
Note:
• If you forget your security code, enter “8888” instead.
“8888” is a security code that can always be used.
DV-CP706̲En.book Page 49 Wednesday, July 2, 2008 10:25 AM
Configuring the DV-CP706 —Continued
HDMI Control
With this setting, you can turn RIHD control over HDMI on or off.
On (default): RIHD control on.
Off: RIHD control off.
Notes:
• RIHD (Remote Interactive over HDMI) is Onkyo’s implementation of CEC (Consumer Electronics Control), which allows integrated system control over
HDMI and is part of the HDMI standard. In addition to Onkyo AV components, it allows interoperability with CEC-compatible AV components and TVs made by other manufacturers. However, operation with components other than RIHD-compatible components or recommended components cannot be guaranteed.
• Select Off if a connected component is incompatible or you’re not sure about its compatibility.
• If operation is unreliable when set to On, select Off instead.
Power Control
With this setting, you can turn RIHD power control over
HDMI on or off.
On (default): RIHD power control on.
Off: RIHD power control off.
Notes:
• The Power Control setting can be set only when the
HDMI Control setting is set to On.
• When set to On, the DV-CP706 can be turned on or off automatically along with the other RIHD-compatible components in the system.
• HDMI power control only works with RIHD-compatible components that support it and may not work properly with some components due to their settings or compatibility.
• When set to On, the DV-CP706 consumes more power.
• When set to On, the DV-CP706 enters Standby mode and the STANDBY indicator lights up.
Direct Change
With this setting, you can turn RIHD direct change over
HDMI on or off.
On (default): RIHD direct change on.
Off: RIHD direct change off.
Notes:
• The Direct Change setting can be set only when the
HDMI Control setting is set to On.
• When set to On, when playback is started on the
DV-CP706, it will automatically be selected as the input source on an RIHD-compatible TV or AV receiver.
• HDMI direct change only works with RIHD-compatible components that support it and may not work properly with some components due to their settings or compatibility.
Auto Power Off
The Auto power off function automatically turns off the
DV-CP706 after 20 minutes of inactivity.
Initial Setup Menu
This menu appears automatically the very first time you
turn on the DV-CP706. See “First Time Setup” on page 23 for more information.
TV Shape—see page 44
HDMI Output Setting—see page 45
On-Screen Language—see page 47
Selecting Other Languages
This section explains how to select other languages for disc menus, audio, and subtitles.
1
Remote controller
Select “Others” from the Disc
Menu Language, Audio Language, or Subtitle menu, and then press [ENTER].
The language code boxes appear.
2
Remote controller
Use the remote controller’s Left/
Right [ ]/[ ] buttons to select the code boxes.
Use the Up/Down [ ]/[ ] buttons to enter a language code.
See adjacent table for language codes.
3
Remote controller
When you’ve finished, press the
[ENTER] button.
49
DV-CP706̲En.book Page 50 Wednesday, July 2, 2008 10:25 AM
Configuring the DV-CP706 —Continued
50
Language Code List
Use this list when specifying other languages.
Bislama
Bengali
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
Bhutani
Esperanto
Estonian
Basque
Persian
Finnish
Fiji
Faroese
FA
FI
FJ
FO
Frisian
Irish
FY
GA
Scots-Gaelic GD
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
HY
IA
IE
IK
IN
GL
GN
GU
HA
HI
HR
HU
CY
DA
DZ
EO
ET
EU
BI
BN
BO
BR
CA
CO
CS
Language Code
Japanese JA
English
French
EN
FR
German
Italian
DE
IT
Spanish
Chinese
Dutch
Portuguese
Swedish
Russian
Korean
ES
ZH
NL
PT
SV
RU
KO
Greek
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
AS
AY
AZ
BA
Byelorussian BE
Bulgarian BG
Bihari BH
EL
AA
AB
AF
AM
AR
Language
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Norwegian
Occitan
Oromo
Oriya
Panjabi
Polish
Pashto, Pushto
Quechua QU
Rhaeto-Romance RM
Kirundi
Romanian
RN
RO
Kinyarwanda
Sanskrit
Sindhi
RW
SA
SD
Sangho
Serbo-Croatian
Sinhalese
Slovak
Slovenian
Samoan
SG
SH
SI
SK
SL
SM
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
SW
TA
TE
TG
TH
TI
TK
TL
TN
TO
TR
TS
SN
SO
SQ
SR
SS
ST
SU
NO
OC
OM
OR
PA
PL
PS
MR
MS
MT
MY
NA
NE
LV
MG
MI
MK
ML
MN
MO
Code
KY
LA
LN
LO
LT
Language Code
Icelandic
Hebrew
IS
IW
Yiddish
Javanese
Georgian
JI
JW
KA
Kazakh
Greenlandic
Cambodian
Kannada
Kashmiri
Kurdish
KK
KL
KM
KN
KS
KU
Language
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Zulu
VI
VO
WO
XH
YO
ZU
Code
TT
TW
UK
UR
UZ
DV-CP706̲En.book Page 51 Wednesday, July 2, 2008 10:25 AM
Troubleshooting
Symptom
Can’t turn on the
DV-CP706?
No picture?
No sound?
Possible cause
The power cord is not connected.
External interference is affecting the DV-CP706’s digital circuitry.
The wrong input source is selected on your TV.
The video cable is not connected properly.
On the Australian model, the PAL Output Setting is set incorrectly for the connected TV.
No HDMI Video Output?
The HDMI Output Setting is set to Off.
Your TV doesn’t support HDMI Resolution settings of 480i, 720p, 1080i, and 1080p.
Remedy
Connect the power cord to a suitable wall outlet.
Turn off the DV-CP706, wait five seconds, then try turning it on again. If that fails, disconnect the power cord from the wall outlet, wait 10 seconds, reconnect it, then try turning it on again.
On your TV, select the input to which the DV-CP706 is con-
Check the video cable and correct as necessary (pages 19, 21).
Change the PAL Output Setting to the correct setting for the
TV.
Try pressing the [RESOLUTION] button on the remote controller repeatedly to switch the HDMI OUT on, and then pressing the [RESOLUTION] button repeatedly to get pic-
No Component Video Output?
Your TV does not support progressive scanning.
HD JPEG mode is on.
Press and hold down the Previous [ ] button, and then press the [ON/STANDBY] button to change the component
video output to interlaced (page 45). Make sure the PRGV
indicator is not on.
When HD JPEG mode is on, no video is output by the COM-
PONENT VIDEO OUT.
No S-Video or Composite Video Output?
The Progressive setting is set to Progressive.
The Progressive setting is not set to interlaced.
When set to Progressive, only the component video output outputs video.
Press and hold down the Previous [ ] button, and then press the [ON/STANDBY] button to change the component
video output to interlaced (page 45). Make sure the PRGV
indicator is not on.
Your TV is connected with S-video or composite video and HD JPEG mode is selected.
The wrong input source is selected on your hi-fi amp or AV receiver.
The audio cable is not connected properly.
The hi-fi amp or AV receiver connected to the
DV-CP706’s audio outputs is not on.
HD JPEG mode can only be used with the HDMI OUT.
On your hi-fi amp or AV receiver, select the input to which
the DV-CP706 is connected (page 20).
Check the audio cable and correct as necessary (page 19–21).
Turn on the hi-fi amp or AV receiver.
The Digital/HDMI Audio Out setting is incorrect.
Check the Digital/HDMI Audio Out setting and correct as
No Sound from the HDMI OUT?
The Digital/HDMI Audio Out setting is set to Off.
The DVD player is connected to the DVI jack on your TV or AV receiver.
The HDMI setting on your TV or AV receiver is set to DVI.
Your TV or AV receiver doesn’t support Dolby
Digital.
Your TV or AV receiver doesn’t support DTS.
Your TV or AV receiver doesn’t support 96 kHz
PCM.
Change the Digital/HDMI Audio Out setting to either All or
You won’t hear any sound from the HDMI output if the source component is only DVI/HDCP-Compatible.
Change the HDMI setting on your TV or AV receiver to
HDMI.
Change the Digital/HDMI Audio Out setting to PCM (see
The DV-CP706 will not be able to play DTS format audio or soundtracks. On your DVD-Video disc’s audio setup menu,
select an audio format other than DTS (see “Audio Formats” on page 22).
Change the Linear PCM Out setting to Down Sample On
51
DV-CP706̲En.book Page 52 Wednesday, July 2, 2008 10:25 AM
Troubleshooting —Continued
Can play CDs but not
DVDs?
Can play DVDs but not
CDs?
Symptom
No sound?
The picture distorts occasionally?
Picture instability or noise?
Can’t start playback?
Can’t play MP3/WMA/
JPEG discs?
Can’t select MP3 files?
Can’t play WMA files?
Can’t view JPEG files?
Possible cause
No Digital Audio Output?
The Digital/HDMI Audio Out setting is set to
Off.
Your TV or AV receiver doesn’t support Dolby
Digital.
Your TV or AV receiver doesn’t support DTS.
The source material is DTS and the Digital/
HDMI Audio Out setting is set to PCM.
Your TV or AV receiver doesn’t support
96 kHz PCM.
The disc is dirty.
You’re using the Fast Forward or Fast Reverse function.
The DV-CP706 is connected to your TV via a
VCR or other video equipment and its copy protection system is affecting the picture.
No discs loaded.
The selected disc cannot be played because it’s incompatible.
The disc is upside down.
The disc is not centered in the disc bay.
The disc is dirty.
The selected disc has parental lock and the
Parental Lock function is on.
The Chain mode function is set to play only
CDs.
The Chain mode function is set to play only
DVDs.
The disc is not ISO9660 Level 2 format or
Joliet.
The disc has not been finalized.
MP3 files without a “.mp3” or “.MP3” filename extension are not recognized.
Remedy
Change the Digital/HDMI Audio Out setting to
Change the Digital/HDMI Audio Out setting to
The DV-CP706 will not be able to play DTS format audio or soundtracks. On your DVD-Video disc’s audio setup menu, select an audio format other than DTS.
When the Digital/HDMI Audio Out setting is set to
PCM, DTS sources are not output by the digital audio outputs. Change the setting to ALL.
Change the Linear PCM Out setting to Down Sam-
Remove the disc and clean it (page 10).
A little picture distortion may occur when using these functions. This is normal.
Connect the DV-CP706 directly to your TV
Load only compatible discs (page 8).
Load the disc the correct way up (page 25).
Place the disc in the center of the disc bay (page 25).
Remove the disc and clean it (page 10).
Turn off the Parental Lock function (page 48).
Change the Chain mode setting or cancel Chain
Change the Chain mode setting or cancel Chain
Use only ISO9660 Level 2 format or Joliet discs
Use the correct filename extension (page 9).
The sampling rate or bit-rate is not supported.
Use MP3 files that use the supported sampling rates and bit-rates.
WMA files without a “.wma” or “.WMA” filename extension are not recognized.
The WMA file’s copyright option is on.
JPEG files without a “.jpg” or “.JPG” filename extension are not recognized.
Use the correct filename extension (page 9).
Don’t use the copyright option (page 9).
Use the correct filename extension (page 9).
The JPEG file is too big.
Use JPEG files that are less than 5 megabytes
The message “BAD DISC” appears on the display?
The disc is dirty.
Remove the disc and clean it (page 10).
Buttons on the
DV-CP706 and remote controller don’t work?
Power supply voltage fluctuations and other anomalies, such as static electricity, can interfere with normal operation.
Turn off the DV-CP706, wait five seconds, then turn it on again. If that doesn’t resolve the issue, disconnect the power cord from the wall outlet, wait five seconds, reconnect it, then try again.
52
DV-CP706̲En.book Page 53 Wednesday, July 2, 2008 10:25 AM
Troubleshooting —Continued
Buttons on the
DV-CP706 work OK but those on the remote controller don’t?
The work?
functions don’t
RIHD doesn’t work?
There are no batteries in the remote controller.
Install new batteries (page 17).
The batteries are flat.
The batteries are installed incorrectly.
You’re not pointing the remote controller at the DV-CP706’s remote sensor.
You’re too far away from the DV-CP706.
Replace with new batteries (page 17).
Check the batteries and correct as necessary
Point the remote controller at the DV-CP706’s
Use the remote controller closer to the DV-CP706
(page 17). The remote controller has a range of
approximately 16 ft. (5 meters).
A strong light source is interfering with the
DV-CP706’s remote sensor.
Make sure that the DV-CP706 is not subjected to direct sunshine or inverter-type fluorescent lights.
Relocate if necessary.
If the DV-CP706 is installed in a cabinet with colored glass doors, the remote controller may not work reliably when the doors are closed.
The cable is not connected properly.
The DV-CP706 is not connected with an analog audio connection.
The HDMI Control setting is set to Off.
A component in your system does not support
CEC.
A component in your system has HDMI CEC control turned off.
One of the components in your system does not support CEC or is not connected correctly.
Open the doors, or use a cabinet without colored glass.
Make sure the cable is connected properly.
To use , you must make an connection and an analog audio connection (RCA) between the DV-CP706 and the AV receiver, even if they are connected digitally.
Set the HDMI Control setting to On.
Refer to the component’s instruction manual to see if it supports CEC.
Refer to the component’s instruction manual and turn on HDMI CEC control.
Refer to the other component’s instruction manual to see if it supports CEC and check your connections.
There’s a problem with the HDMI cable that you’re using.
The DV-CP706’s settings may be changed by disconnecting and connecting the HDMI cable.
Try another HDMI cable.
Display a video manually on the TV.
An cable is connected to the DV-CP706.
Disconnect the cable.
53
DV-CP706̲En.book Page 54 Wednesday, July 2, 2008 10:25 AM
Troubleshooting —Continued
■ Abnormal Behavior
The DV-CP706 contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.
Alternatively, press and hold the Stop [ ] button until “RESET” appears on the display (about 10 seconds).
■ Restoring the Default Settings
To reset the DV-CP706 to its factory defaults, turn it on, and when “ONKYO DVD” has disappeared from the display, while holding down the Stop [ ] button, press the [ON/STANDBY] button. “INITIALIZE” appears on the display.
When the reset is complete, “COMPLETE” is displayed, and the DV-CP706 enters Standby mode.
■ HDMI Status Mode
If you’re using an HDMI connection and there’s no picture or sound, you can check the status of the HDMI connection by pressing and holding down the DV-CP706’s [DISPLAY] button for 10 seconds until a message ID appears on the display. Look up the message ID in the following tables and check the HDMI connections and settings on both the
DV-CP706 and the connected component.
HDMI connection and HDMI-related settings status
Displayed ID
MSG ID 001
MSG ID 005
MSG ID 015
Message
Turn the DV-CP706 and the connected component off, then turn them on again. Make sure that the connected component is working properly and that the DV-CP706’s HDMI settings are configured suitably for that component.
No picture from the HDMI connection
Displayed ID Message
MSG ID 002
The HDMI Output Setting is set to Off. Change it to On (page 45).
MSG ID 003
MSG ID 004
MSG ID 005
MSG ID 006
MSG ID 007
The HDMI cable may not be connected properly. Check the connection. Also, make sure the HDMI input on the TV or AV receiver is correctly configured to received HDMI.
Make sure the HDMI input on the TV or AV receiver is correctly configured to received HDMI.
The connected component may not support HDCP. Make sure the connected component supports
HDCP.
Turn the DV-CP706 and the connected component off, then turn them on again.
The DV-CP706 may be connected to the other component’s DVI jack. Some TVs may not properly receive the video output by the DV-CP706. Also, with a DVI connection, there will be no sound.
MSG ID 008
MSG ID 009
The DV-CP706’s HD Resolution setting is set to 480i or 720p or 1080i or 1080p. If your TV doesn’t
support these resolutions, select another resolution (page 24).
The connected component may not be receiving the HDMI signal properly.
Try selecting another resolution on the DV-CP706 (page 24).
No sound from the HDMI connection
Displayed ID
MSG ID 010
MSG ID 011
MSG ID 014
MSG ID 012
MSG ID 013
MSG ID 016
MSG ID 017
Message
The DV-CP706’s Digital/HDMI Audio Out setting is set to Off. Change the setting to All or PCM
The connected component may not support 96 kHz PCM. Set the DV-CP706’s Linear PCM Out
setting to Down Sample On (page 46).
The connected component may not support Dolby Digital. Set the DV-CP706’s Digital/HDMI Audio
The connected component may not support DTS.
The DV-CP706 cannot play the DTS format audio or soundtrack. On your DVD-Video disc’s audio setup menu, select an audio format other than DTS.
54
Specifications
Signal System
Composite Video Output/Impedance
S-Video Output/Impedance
Component Video Output/Impedance
DVD Linear Audio
Audio CD
Signal to Noise Ratio
Audio Dynamic Range
THD (Total Harmonic Distortion)
Wow and Flutter
Audio Output
Audio Output/
Impedance
Digital
Optical
Digital
Coaxial
Audio Output/
Impedance
Analog
Power supply
North American model
Australian model
Power Consumption
Stand-by Power Consumption
Dimensions (W x H x D)
Weight
Operating Conditions Temperature/Humidity
Disc compatibility
NTSC (North American model),
PAL/NTSC (Australian model)
1.0 V(p-p)/75
Ω
negative sync, RCA
Y: 0.7 V(p-p)/75
Ω
negative sync, 4-pin mini DIN
C: 0.286 V(p-p)/75
Ω
Y: 1.0 V(p-p)/75
Ω
, P
B
/P
R
: 0.7 V(p-p)/75
Ω
, RCA
4 Hz–44 kHz(96 kHz), 4 Hz–22 kHz(48 kHz)
4 Hz–20 kHz(44.1 kHz)
95 dB
95 dB
0.007% (1 kHz)
Below threshold of measurability
–22.5 dBm
0.5 V (p–p), 75
Ω
2.0 V (rms), 540
Ω
AC 120 V, 60 Hz
AC 100–240 V, 50 Hz
15 W
0.5 W
435 X 91 X 431 mm (17-1/8" X 3-9/16" X 16-15/16")
5.3 kg (11.7 lbs.)
5°C–35°C (41°F–95°F) / 5%–85%
AUDIO CD, DVD-VIDEO, MP3, WMA, CD-R and RW,
DVD±R and RW (VIDEO MODE), JPEG-CD
Disc that have not been property finalized may only be partially playable or not playable at all.
Specifications and features subject to change without notice.
55
DV-CP706̲En.book Page 56 Wednesday, July 2, 2008 10:25 AM
SN 29344788
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: +49-8142-4401-0 Fax: +49-8142-4401-555 http://www.eu.onkyo.com/
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
ONKYO CHINA LIMITED
Unit 1&12, 9/F, Ever Gain PlazaTower 1, 88, Container Port Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039 http://www.ch.onkyo.com/
HOMEPAGE http://www.onkyo.com/
I0806-1
* 2 9 3 4 4 7 8 8 *
Advertisement