Panasonic DMP-BDT350 User Guide Manual Operating Instruction Pdf
Advertisement
Advertisement
DMP-BDT300_VQT2J87_eng.book 1 ページ 2010年1月21日 木曜日 午後8時9分
Operating Instructions
Blu-ray Disc Player
Model No.
DMP-BDT300
DMP-BDT350
Dear customer
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read the instructions completely. Please keep this manual for future reference.
If you have any questions contact
U.S.A. and Puerto Rico : 1-800-211-PANA(7262)
Canada : 1-800-561-5505
U.S.A. and Puerto Rico : The warranty can be found on page 46.
Canada :The warranty can be found on page 47.
La referencia rápida en español se puede encontrar en la página 48.
PP
VQT2J87 until
2010/2/8
DMP-BDT300_VQT2J87_eng.book 2 ページ 2010年1月18日 月曜日 午後5時27分
Getting started
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit.
Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms or when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE,
≥
DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON THE
APPARATUS.
≥
USE ONLY THE RECOMMENDED
ACCESSORIES.
≥
DO NOT REMOVE THE COVER (OR BACK);
THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK
OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
2
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 3 ページ 2010年1月21日 木曜日 午後8時9分
Table of contents
Getting started
IMPORTANT SAFETY
INSTRUCTIONS . . . . . . . . . . . . . . . . 2
Accessory . . . . . . . . . . . . . . . . . . . . . 4
Unit and media care . . . . . . . . . . . . . 4
Control reference guide . . . . . . . . . . 5
Playable discs/Cards/
USB devices . . . . . . . . . . . . . . . . . . . 6
Connections & Settings
STEP 1 : Connecting to a TV . . . . . . 8
STEP 2 : Connecting to an amplifier/receiver . . . . 10
STEP 3 : Connecting to a broadband network. . . . 12
STEP 4 : Connecting to an AC power . . . . . . . . . . 14
STEP 5 : Setting . . . . . . . . . . . . . . . 14
STEP 6 : Reprogramming the remote control . . . . . . 17
Playback
Inserting or removing media . . . . . . 18
FUNCTIONS menu . . . . . . . . . . . . . 18
Playing video contents . . . . . . . . . . 19
Enjoying 3D video . . . . . . . . . . . . . . 23
Playing still pictures . . . . . . . . . . . . 24
Playing music . . . . . . . . . . . . . . . . . 25
Enjoying VIERA CAST TM . . . . . . . . . 25
DLNA feature
[BDT350]
. . . . . . . . . . . . . 26
Linked operations with the TV
(VIERA Link TM “HDAVI Control TM ”)
. . . . . . . . . . . 27
Settings
Playback menu . . . . . . . . . . . . . . . . 28
Setup menu . . . . . . . . . . . . . . . . . . 30
Reference
Troubleshooting guide . . . . . . . . . . 34
Messages . . . . . . . . . . . . . . . . . . . . 37
Audio Information . . . . . . . . . . . . . . 38
About MP3/JPEG/DivX/
AVCHD/MPEG2 files . . . . . . . . . . . 40
Supplemental information . . . . . . . . 42
Specifications . . . . . . . . . . . . . . . . . 43
Glossary . . . . . . . . . . . . . . . . . . . . . 45
Limited Warranty
(ONLY FOR U.S.A. AND PUERTO RICO) . . . 46
Limited Warranty
(Only for CANADA). . . . . . . . . . . . . 47
Referencia rápida en español
(Spanish Quick Reference) . . . . . . . . . . 48
Index . . . . . . . . . . . . . . . . . . . . . . . . 49
About descriptions in these operating instructions
≥ Instructions for operations are generally described using the remote control.
≥ These operating instructions are applicable to models
DMP-BDT300 and DMP-BDT350.
[BDT300] [BDT350] : indicates features applicable to
DMP-BDT300 and DMP-BDT350, respectively.
About Firmware updates (
>
17)
3
VQT2J87(ENG)
VQT2J87~Body_eng.fm 4 ページ 2010年1月27日 水曜日 午前9時14分
Accessory
Check the supplied accessories before using this unit.
1 Remote control
(N2QAYB000508)
1 Audio/Video cable
(K2KA6BA00004)
2 Batteries for remote control
1 AC power supply cord
(K2CB2CB00022)
1 Wireless LAN Adaptor (DY-WL10*)
(C5ZZZ0000048)
1 USB extension cable (DY-WL10*)
(K2KYYYY00064)
* DY-WL10 includes Wireless LAN Adaptor and USB extension cable, and it is sold in the market.
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit.
Unit and media care
∫ Clean this unit with a soft, dry cloth
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.
∫ Clean the lens with the lens cleaner disc
Lens cleaner disc: RP-CL720PP (not included)
≥ This lens cleaner is sold as specific for DIGA, but can be used on this unit as well.
∫ Clean discs
DO DO NOT
≥ Product numbers correct as of January 2010. These may be subject to change.
≥ Do not use AC power supply cord and Wireless LAN Adaptor with other equipment. Wireless LAN Adaptor is not designed to use with PC .
≥ MAC address is stated on the bottom of Wireless LAN Adaptor.
≥ Only for U.S.A. and Puerto Rico: To order accessories, refer to “Accessory
Purchases (United States and Puerto Rico)” on page 46.
For other areas: To order accessories, call the dealer from whom you have made your purchase.
Using the remote control
Insert so the poles ( i and j ) match those in the remote control.
R6/LR6, AA
(Alkaline or manganese batteries)
Point it at remote control signal sensor on this unit. ( > 5)
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
≥ Do not mix old and new batteries or different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
4
VQT2J87(ENG)
Wipe with a damp cloth and then wipe dry.
∫ Disc and card handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.
≥ Clean any dust, water, or foreign matter from the terminals on the rear side of the card.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
∫ To dispose or transfer this unit
The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. ( > 34, “To return all settings to the factory preset.”)
≥ The operation history may be recorded in the memory of this unit.
DMP-BDT300_VQT2J87_eng.book 5 ページ 2010年1月21日 木曜日 午後8時9分
Control reference guide
12
1
2
13
3
14
15
16
4
5
6
10
11
7
8
9
20
21
22
17
18
19
1 2
1 Turn the unit on and off ( > 14)
2 Open or close the disc tray ( > 18)
CAUTION
Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and this may cause malfunction.
3 Select title numbers, etc./Enter numbers or characters
( > 25)
[CANCEL] : Cancel
4 Basic playback control buttons ( > 19)
5 Show status messages ( > 19)
6 Show Top menu/Direct Navigator ( > 19)
7 Selection/OK, Frame-by-frame ( > 19)
8 Show sub menu ( > 20)
9 These buttons are used when;
≥ Operating a BD-Video disc that includes Java TM applications (BD-J).
≥ Displaying “Title View” and “Album View” screens.
( > 24)
≥ Operating contents of VIERA CAST. ( > 25)
10 Show Setup menu ( > 30)
11 Switch on/off Secondary Video (Picture-in-picture) ( > 21)
12 Transmit the remote control signal
13 TV operation buttons ( > 17)
You can operate the TV through the unit’s remote control.
[ Í TV POWER] : Turn the television on and off
[INPUT] : Input select
[ i j VOL] : Adjust the volume
[ W X CH] : Channel select
14 Adjust the volume of an amplifier/receiver.
15 Select audio ( > 19)
16 Displays the Home screen of the VIERA CAST ( > 25)
17 Exit the menu screen
18 Show Pop-up menu ( > 19)
19 Show Functions menu ( > 18)
20 Return to previous screen
21 Select drive (BD/DVD/CD, SD card or USB device)
( > 18)
22 Show Playback menu ( > 28)
3 4 5 6
Pull to flip down the front panel.
7 8
1 POWER button ( POWER Í /I ) ( > 14)
Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.
2 Disc tray ( > 18)
3 Display
Disc indicator SD card indicator USB device indicator
The indicator blinks when reading data from a disc, a card or a USB device, or writing data to a card.
4 V.OFF LED (Video off LED)
≥ It is possible to set the LED to turn on/off. ( > 31)
9 10 11
5 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20 e up and down, 30 e left and right
6 Open or close the disc tray ( > 18)
7 SD Card LED
≥ It is possible to set the LED to turn on/off. ( > 31)
8 SD card slot ( > 18)
9 USB port ( > 18)
10 Stop ( > 19)
11 Start play ( > 19)
Rear panel terminals ( > 8–14)
5
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 6 ページ 2010年1月18日 月曜日 午後5時27分
Playable discs/Cards/USB devices
Type Logo examples Type detail
BD-Video
BD-RE
BD
BD-R
DVD-Video
DVD-RAM
DVD-R
DVD
DVD-R DL
Playable contents
Video
Video
JPEG
Video
DivX ®
Video
Video
AVCHD
JPEG
Video
AVCHD
DivX
MP3
JPEG
CD
SD
USB
—
—
—
DVD-RW
Video
AVCHD
+R/+RW/+R DL
Music CD
Music [CD-DA]
CD-R
CD-RW
DivX
Music [CD-DA]
MP3
JPEG
SD Memory Card (8 MB to 2 GB)
(Includes miniSD Card and microSD Card)
SDHC Memory Card (4 GB to 32 GB)
(Includes microSDHC Card)
SDXC Memory Card (48 GB, 64 GB)
(Includes microSDXC Card)
USB devices
(up to 128 GB)
MPEG2
AVCHD
JPEG
DivX
MP3
JPEG
6
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 7 ページ 2010年1月18日 月曜日 午後5時27分
∫ Discs that cannot be played in this unit
Any other disc that is not specifically supported or previously described.
≥ 2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ Super Audio CD
≥ Photo CD
≥ DVD-Audio
≥ Video CD and Super Video CD
≥ WMA discs
≥ PAL discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec
∫ Region management information
BD-Video
This unit plays BD-Video marked with labels containing the region code A .
Example:
DVD-Video
This unit plays DVD-Video marked with labels containing the region number “1” or “ALL” .
Example:
1 ALL
1
2
4
∫ SD card
≥ MiniSD Cards, microSD Cards, microSDHC
Cards and microSDXC Cards can be used, but must be used with an adaptor card. These are usually supplied with such cards, or otherwise customer provided.
≥ Keep the Memory Card out of reach of children to prevent swallowing.
≥ To protect the card’s contents, move the record prevention tab (on the SD card) to “LOCK”.
≥ This unit is compatible with SD Memory Cards that meet SD
Card Specifications FAT12 and FAT16 formats, as well as
SDHC Memory Cards in FAT32 format (Does not support long file name.) and SDXC Memory Cards in exFAT.
≥ If the SD card is used with incompatible computers or devices, recorded contents may be erased due to the card being formatted etc.
≥ Useable memory may be slightly less than the card capacity.
∫ USB device
≥ This unit supports connecting a USB memory, digital camera and video camera produced by Panasonic, etc. It is not warranted that all USB devices will work with this unit.
≥ This unit does not support USB device charging.
≥ FAT12, FAT16 and FAT32 file systems are supported.
≥ This unit supports USB 2.0 High Speed.
≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files were created.
≥ The producers of the disc can control how discs are played, so you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.
∫ Finalize
DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions.
∫ BD-Video
≥ 3D videos can be played back when this unit is connected to a 3D compatible TV using an HDMI cable.
≥ This unit supports high bit rate audio (Dolby Digital Plus,
Dolby TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) adopted in BD-Video. In order to enjoy these audio formats, refer to page 38.
∫ Music CD
≥ Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be guaranteed.
≥ The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital
Audio (CD-DA) format so playback may not be possible.
7
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 8 ページ 2010年1月18日 月曜日 午後5時27分
STEP 1 : Connecting to a TV
≥ Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit.
≥ Before making any connections we suggest you temporarily disconnect all the units from AC power.
≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly.
≥ Refer to page 39, about recommended settings for each piece of connected equipment.
≥ Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft) or less.
Recommended part number:
RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.),
RP-CDHS50 (5.0 m/16.4 ft.), etc.
Highest Quality
(VIDEO)
∫
Via an HDMI MAIN AV OUT terminal
– It is possible to playback 3D videos by connecting this unit with a 3D compatible TV.
HDMI IN
HDMI cable
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
( > 32).
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” ( > 27).
8
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 9 ページ 2010年1月18日 月曜日 午後5時27分
∫
Via a COMPONENT VIDEO OUT terminal
∫
Via a VIDEO OUT terminal
Standard Quality
(VIDEO)
Audio/Video cable
(included)
AUDIO IN
R L
COMPONENT VIDEO IN
Component
Video cable
AUDIO IN
R L VIDEO IN
Audio/Video cable (included)
≥ Connect terminals of the same color.
≥ Set “Component Video Resolution” to “480p”, “720p” or
“1080i” ( > 32).
≥ Set “HDMI Video Mode” to “Off” ( > 32).
≥ Connect terminals of the same color.
9
VQT2J87(ENG)
VQT2J87~Body_eng.fm 10 ページ 2010年1月26日 火曜日 午後2時41分
STEP 2 : Connecting to an amplifier/receiver
Digital Audio
∫ Via an HDMI MAIN AV OUT terminal
– It is possible to playback 3D videos when the connected
TV and amplifier/receiver are 3D compatible.
∫ Via an HDMI MAIN AV OUT and HDMI SUB AV
OUT terminal
– It is possible to playback 3D videos when the connected
TV is 3D compatible, even if the amplifier/receiver is not
3D compatible.
HDMI IN
HDMI cable
Multi channel speakers
Amplifier/receiver
HDMI IN
HDMI cable
Multi channel speakers
Amplifier/receiver
HDMI IN
HDMI cable
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
( > 32).
≥ Set “Digital Audio Output” depending on the connected amplifier/receiver ( > 31).
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” ( > 27).
≥ Set “HDMI Video Mode” and “HDMI Audio Output” to “On”
( > 32).
≥ Set “HDMI(SUB) Output Mode” to “V.OFF”. ( > 23)
– Audio is output in high resolution regardless of compatibility of the amplifier/receiver with 3D.
≥ The HDMI connection using HDMI MAIN AV OUT supports
VIERA Link “HDAVI Control” ( > 27).
The HDMI SUB AV OUT terminal is not compatible with the
VIERA Link “HDAVI Control”.
10
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 11 ページ 2010年1月18日 月曜日 午後5時27分
∫
Via a COAXIAL or OPTICAL terminal
Amplifier/receiver
COAXIAL IN OPTICAL IN
Coaxial cable OR
Optical cable
Analog Audio
∫
Via a 5.1/7.1ch AUDIO OUT terminal
Multi channel speakers
Amplifier/receiver
Connect Audio cables to terminals corresponding to the speakers you have connected.
≥ When connecting a TV ( > 8) with HDMI AV OUT terminal, set “HDMI Audio Output” to “Off” ( > 32).
≥ Set “Digital Audio Output” depending on the used terminal and connected amplifier/receiver ( > 31).
Cable connections a Front speaker (L/R) b Surround speaker (L/R) c Subwoofer d Center speaker e Surround back speaker (L/R)
(Only for 7.1ch AUDIO OUT)
≥ Set the “Analog Audio Output” to “7.1ch” or “2ch (Downmix)
+ 5.1ch”, depending on the used terminal ( > 32).
≥ You can set the “Analog Audio Output” from the easy setting
( > 14).
≥ When connecting equipment with HDMI AV OUT terminal, set “HDMI Audio Output” to “Off” ( > 32).
11
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 12 ページ 2010年1月21日 木曜日 午後8時9分
STEP 3 : Connecting to a broadband network
The following services can be used when this unit is connected to broadband.
≥ Firmware can be updated ( > 17)
≥ You can enjoy BD-Live ( > 21)
≥ You can enjoy VIERA CAST ( > 25)
≥ [BDT350] : DLNA feature ( > 26)
∫ Using LAN (ethernet) cable
For details about connection method, refer to the instructions supplied with the connected equipment.
≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes etc.
∫ Using Wireless LAN Adaptor (DY-WL10)
Broadband router, etc.
LAN Cable
Wireless LAN Adaptor
(included)
Wireless router
(Access point), etc.
LAN Cable
[BDT350]
LAN Cable
[BDT350]
Modem (Broadband)
*Provided by ISP
DLNA Certified media server
(Refer to page 26 for more information.)
≥ Use shielded LAN cables when connecting to peripheral devices.
≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.
Modem (Broadband)
*Provided by ISP
DLNA Certified media server
(Refer to page 26 for more information.)
≥ Wireless LAN Adaptors other than the included Wireless
LAN Adaptor cannot be used.
≥ When connection conditions are poor, use the included
USB extension cable to connect the Wireless LAN Adaptor provided with this unit.
≥ Do not use any other USB extension cables except the supplied one.
≥ For up to date compatibility information on your Wireless router (Access Point) refer to http://panasonic.jp/support/global/cs/
For additional information about this unit refer to http://www.panasonic.com/consumer/support
12
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 13 ページ 2010年1月26日 火曜日 午後1時52分
Precautions of Wireless LAN Adaptor
The following limits are in place regarding the usage of this device. You must be aware of these limits before using this device.
Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of this device.
≥ Do not use this device to connect to any wireless network for which you do not have usage rights.
During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.
* An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.
≥ Data transmitted and received over radio waves may be intercepted and monitored.
≥ This wireless LAN adaptor contains delicate electronic components.
Please use this adaptor in the manner in which it was intended and follow the following points:
– Do not expose the adaptor to high temperatures or direct sunlight.
– Do not bend, or subject the adaptor to strong impacts.
– Keep the adaptor away from moisture.
– Do not disassemble or alter the adaptor in any way.
– Do not attempt to install the adaptor in any incompatible device.
Wireless LAN Adaptor is prohibited from export or bringing into nations* upon which the United States place embargoes.
Wireless LAN Adaptor is subject to Export Administration Regulations
(EAR) due to the installation of encryption device made in the United
States. (Current as of November 2009)
* Cuba, Iran, Syria, North Korea, Sudan etc.
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA.
This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
This product is restricted to indoor use due to its operation in the 5.15 to
5.25 GHz frequency range.
FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless devices are absolutely safe.
Low power Wireless devices emit low levels of radio frequency energy
(RF) in the microwave range while being used.
Whereas high levels of RF can produce health effects (by heating tissue), exposure to low-level RF that does not produce heating effects causes no known adverse health effects.
Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research.
Wireless LAN adaptor (DY-WL10) has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)
Exposure rules.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
FCC Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC caution: To maintain compliance with FCC regulations, shielded interface cables must be used with this equipment. Operation with non-approved equipment or unshielded cables may result in interference to radio and TV reception. Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
THE FOLLOWING APPLIES ONLY IN CANADA.
This Class B digital apparatus complies with Canadian ICES-003.
Product Identification Marking is located on the bottom of unit.
13
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 14 ページ 2010年1月18日 月曜日 午後5時27分
STEP 4 : Connecting to an AC power
AC power supply cord
(included)
To a household AC outlet
≥ This unit consumes a small amount of AC power (“Quick
Start”: “Off”, approx. 0.1 W) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.
The unit should be installed near an accessible AC power outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the power cord from the AC power outlet.
STEP 5 : Setting
Easy Setting
After connecting your new player for the 1st time and pressing the power button, a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video input on the television.
1
Press [
Í
POWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then the setting information on the TV is acquired by this
TV.
2
Follow the on-screen instructions and make the settings with [
3
,
4
] and press
[OK].
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
≥ You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. (
>
33)
≥ Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will need to select
“7.1ch” if using the 7.1ch output.
Analog Audio Output
Set unit’s analog audio output.
Select only “7.1ch” to enjoy audio from a receiver through 7.1ch analog connections.
Otherwise, select “2ch (Downmix) + 5.1ch.”
2ch (Downmix) + 5.1ch
7.1ch
OK
RETURN
14
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 15 ページ 2010年1月18日 月曜日 午後5時27分
Network Easy Setting
After completing “Easy Setting”, you can continuously perform
“Network Easy Setting”.
1
Select “Wired” or “Wireless” and press
[OK].
Network Easy Setting (Connection Test)
Select a connection mode.
Current setting : Wired
LAN cable connection:
Connect a LAN cable to the unit and select “Wired”.
Wireless LAN connection:
Connect the Wireless LAN Adaptor (DY-WL10) to the USB
port and select “Wireless”.
Wired
Wireless
OK
RETURN
If “Wireless LAN Adaptor is not connected.” is displayed, check that the Wireless LAN Adaptor is fully inserted.
Alternatively, disconnect and reconnect it. If there is still no change in the display, consult your dealer.
2
Follow the on-screen instructions and make the settings with [
3
,
4
,
2
,
1
] and press [OK].
For wireless LAN connection:
If you are using a Wireless router (Access point) that supports
WPS, you can easily perform the settings by selecting “WPS
(PUSH button method)”.
Otherwise, perform the settings by selecting “Search for access point” or “Manual setting” in “Other methods”.
Access Point Connection Setting
Select a connection method to use with an access point of Wireless LAN.
Please refer to the operating instructions of the access point about connection methods.
WPS (PUSH button method)
Other methods p
OK
RETURN
Search for access point
WPS (PIN code method)
Manual setting
≥ WPS (Wi-Fi Protected Setup) is a function that facilitates settings relating to the connection and security of wireless
LAN devices. To see whether your Wireless router (Access point) supports WPS, check the Wireless router operating instructions.
When you experience problems with settings
Access Point Connection Setting
Access Point Connection Setting
Failed to connect to the access point.
A conflict with another device occurred.
Do you want to configure Access Point Connection
Setting again ?
OK
Yes No
Display
A conflict with another device occurred.
Check the following
≥ Please wait a few moments, and then try again.
A time out error occurred.
An authentication error or a time out error occurred.
≥ Setting of the Wireless router
(Access point) for MAC Address etc.
≥ The signal may be weak. Using the included USB extension cable, adjust the position of the
Wireless LAN Adaptor. Do not use any other USB extension cables except the supplied one.
≥ The SSID and the encryption key of the Wireless router
(Access point).
≥ Please wait a few moments, and then try again.
A device error occurred.
≥ Connection of Wireless LAN
Adaptor
If there is no improvement in symptom, contact our Customer
Service Center.
15
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 16 ページ 2010年1月18日 月曜日 午後5時27分
Network Easy Setting (Connection Check)
Network Easy Setting (Connection Check)
Complete.
1. LAN cable connection
2. IP address setting
3. Connection to gateway
: Fail
: Fail
: Fail
LAN cable is not connected.
Please check the connection.
Select “Yes” and press [OK] to check network connection again. Select “No” and press [OK] to finish Network Easy Setting.
OK
Yes No
Check the following
≥ Connection of the LAN cables ( > 12)
Display
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
[BDT350]
1. LAN cable connection or
Connection to access point
: Fail
: Fail
: Fail
: Pass
: Fail
: Fail
:Pass
2. IP address setting
3. Connection to gateway
1. LAN cable connection or
Connection to access point
2. IP address setting
3. Connection to gateway
:Home network available
:Fail
: Pass
: Pass
: Fail
≥ Connection and settings of the hub and router
≥ Settings of “IP
Address/DNS
Settings”
( > 33)
Network Easy Setting (Internet Connection Check)
Network Easy Setting (Internet Connection Check)
Complete.
- Connection to the Internet : Fail(Error code: B019)
Failed the connection test.
Cannot find the server.(Error code: B019)
Please refer to the operating instructions for the cause of the error and the solution for it.
Press [OK].
OK
Display
Cannot find the server.
(Error code: B019)
Failed to connect to the server.
(Error code: B020)
Check the following
≥ “Primary DNS” and “Secondary
DNS” settings of “IP Address/
DNS Settings” ( > 33)
≥ The server may be busy or the service may have been suspended. Please wait a few moments, and then try again.
≥ Settings of “Proxy Server
Settings” ( > 33) and the router
≥ Refer to the operating instructions of the hub or router.
≥ You can perform this setup anytime by selecting “Network Easy Setting” in the Setup menu. ( > 33)
≥ You can redo these settings individually using “Network Settings”. (
>
≥ After performing network settings on this unit, the settings (encryption
33) level, etc.) of the Wireless router (Access point) might change. When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of Wireless router (Access point).
16
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 17 ページ 2010年1月26日 火曜日 午後1時52分
Firmware updates
Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates.
These updates are available free of charge.
This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.
When a new firmware version is available, the following screen is displayed.
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the following website: http://panasonic.net/support/
Yes No
OK
RETURN
DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.
The firmware was updated.
Current Installed Version : x.xx
OK
RETURN
STEP 6 :
Reprogramming the remote control
For other Panasonic products
Change “Remote Control Code” ( > 33) on the main unit and the remote control (the two must match) if you place other
Panasonic products close together and it responds to this remote control.
For TV or amplifier/receiver
You can operate the TV or amplifier/receiver using the unit’s remote control.
1
For televisions
Input the code (
>
42) with the number buttons while pressing [
Í
TV POWER].
For amplifiers/receivers
Input the code (
>
42) with the number buttons while pressing
[RECEIVER
j
VOL].
e.g., 0001: [0] B [0] B [0] B [1]
2
Test by turning on the television or adjusting the volume of the amplifier/ receiver.
≥ If your television or amplifier/receiver brand has more than one code listed, select the one that allows correct operation.
≥ You can perform updates anytime by selecting “Firmware Update” in the
Setup menu . ( > 33)
≥ If downloading on this unit fails or this unit is not connected to the
Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
>
33, “System
Information”)
≥ Downloading will require several minutes. It may take longer or the
Internet may not be connected depending on the connection environment.
≥ If you do not want to check for the latest firmware version, set “Automatic
Update Check” to “Off”. (
>
33)
17
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 18 ページ 2010年1月21日 木曜日 午後8時9分
Playback
Inserting or removing media
FUNCTIONS menu
Major functions of this unit can be operated from the
FUNCTIONS menu.
Press [ 3 , 4 ] to select the item and press [OK].
Blu-ray Disc Player
FUNCTIONS
BD-Video
Playback
Top Menu
≥ When inserting a media item, ensure that it is facing the right way up.
≥ When the indicator on this unit's display blinks, do not turn off the unit or remove the media. Such action may result in loss of the media’s contents.
≥ When removing the SD card, press on the center of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment.
∫ To switch drives
Press [DRIVE SELECT] to select “BD/DVD/CD”, “SD card” or “USB device”.
≥ If media is inserted while the unit is stopped, the drive switches automatically depending on the inserted media.
Network
SD Card
USB device
Other Functions
OK
RETURN
Playback
Top Menu
Menu
Viewing Picture
Viewing Video
Listening Music
[BDT300]
Network
[BDT350]
Network
Home
Network
(DLNA)
Internet
Content
BD/DVD/CD
SD Card
USB device
(
(
(
(
(
(
Play back the contents.
>
>
>
>
>
>
19)
19)
24)
19)
25)
Displays the Home screen of the VIERA CAST (
26)
> 25)
Displays the Home screen of the VIERA CAST ( > 25)
Switches to each drive.
Playlists
Other
Functions
Setup
Card
Management
You can play playlists created on DVD-VR.
( > 30)
( > 21)
To exit the screen
Press [FUNCTION MENU].
≥ Items to be displayed may vary with the media.
≥ If FUNCTIONS screen is not displayed, press [FUNCTION MENU].
18
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 19 ページ 2010年1月26日 火曜日 午後1時52分
Playing video contents
BD DVD CD SD USB
Preparation
Turn on the television and select the appropriate video input on the television.
1
1
Press [
Í
POWER] to turn on the unit.
2
Insert the media.
Play starts.
≥ If the menu is displayed, press [ 3 , 4 , 2 , 1 ] to select the item and press [OK].
≥ When a message screen is displayed while playing back 3D compatible video software, play back in accordance with the instructions.
≥ If play does not start, press [ 1 ] (PLAY).
∫
To show menus
You can show Top Menu, Direct Navigator or Pop-up Menu.
Press [TOP MENU/DIRECT NAVIGATOR] or [POP-UP
MENU].
≥ Press [ 3 , 4 , 2 , 1 ] to select the item and press [OK].
≥ Pop-up menu also appears by pressing [SUB MENU] and selecting “Pop-up Menu”.
∫
To show the status messages
While playing, press [STATUS].
The status messages give you information about what is currently being played. Each time you press [STATUS], the information displayed will change.
e.g.BD-Video
T: Title, C: Chapter, PL: Playlist
T1 C1 0:05.14
Elapsed time in the title
0:20.52
BD-Video
Play
Current position Total time
≥ Depending on media and contents, the display may change or may not appear.
≥ DivX: Successive play is not possible.
≥ It is not possible to playback AVCHD and MPEG2 video which have been dragged and dropped, copied and pasted to the media.
Other operations during play
These functions may not work depending on the media and contents.
Stop
Press [ ∫ ].
The stopped position is memorized.
Resume play function
Press [ 1 ] (PLAY) to restart from this position.
≥ The position is cleared if the tray is opened or you press [ ∫ ] several times to display “STOP” on the unit’s display.
≥ On BD-Video discs including BD-J ( > 45), the resume play function does not work.
Pause
Press [ ; ].
≥ Press [ ; ] again or [ 1 ] (PLAY) to restart play.
Search/Slow-motion
Search
While playing, press [ 6 ] or [ 5 ].
≥ Music and MP3: The speed is fixed to a single step.
Slow-motion
While paused, press [ 6 ] or [ 5 ].
≥ BD-Video and AVCHD: Forward direction [ 5 ] only.
The speed increases up to 5 steps.
≥ Press [ 1 ] (PLAY) to revert to normal playback speed.
Skip
While playing or paused, press [ : ] or [ 9 ].
Skip to the title, chapter or track you want to play.
≥ Each press increases the number of skips.
Frame-by-frame
While paused, press [ 2 ] ( 2; ) or [ 1 ] ( ;1 ).
≥ Press and hold to change in succession forward or backward.
≥ Press [ 1 ] (PLAY) to revert to normal playback speed.
≥ BD-Video and AVCHD: Forward direction [ 1 ] ( ;1 ) only.
Changing audio
Press [AUDIO].
You can change the audio channel number or soundtrack language ( > 28), etc.
19
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 20 ページ 2010年1月21日 木曜日 午後8時9分
Useful functions
1
Press [SUB MENU].
2
Select an item, then press [OK].
While Direct Navigator screen is displayed
Properties
To display the titles properties (recording date, etc.).
View
Chapters
To picture
Select
Folder
To select the chapter.
Playing still pictures
(
> 24)
To switch to another folder.
.
While playing
Screen
Aspect
When black bars are shown at the top, bottom, left, and right sides of the screen, you can enlarge the image to fill the screen.
To display Top Menu.
Top Menu
Pop-up
Menu
Menu
To display Pop-up Menu.
To display Menu.
≥ Depending on the played contents if you perform “Screen
Aspect”, there may be no effect.
≥ When “TV Aspect” ( > 32) is set to “4:3 Pan & Scan” or “4:3
Letterbox”, the “Zoom” effect in “Screen Aspect” is disabled.
≥ Depending on the media and contents, displayed items are different.
20
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 21 ページ 2010年1月18日 月曜日 午後5時27分
Enjoying BD-Live or
BONUSVIEW in BD-Video
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as picture-in-picture or secondary audio etc.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Live allows you to enjoy more functions such as subtitles, exclusive images and online games by connecting this unit to the Internet.
≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.
Playing picture-in-picture
To turn on/off secondary video
Press [PIP].
Secondary video
Enjoying BD-Live discs with
Internet
Some BD-Live content available on the Blu-ray discs may require an Internet account to be created in order to access the BD-Live content. Follow the screen display or instruction manual of the disc for information on acquiring an account.
1
Connect to the network. (
>
12)
2
Insert an SD card
(with 1 GB or more free space)
.
SD card is used as the local storage ( > 45).
3
Insert the disc.
∫ Deleting data/Formatting SD cards
1 Insert an SD card.
2 Press [FUNCTION MENU].
3 Press [ 3 , 4 ] to select “Other Functions” and press [OK].
4 Press [ 3 , 4 ] to select “Card Management” and press
[OK].
5 Press [ 3 , 4 ] to select “BD-Video Data Erase” or “Format
SD Card” and press [OK].
Card Management
SD card
No. of Files 6
Free space 300 MB
BD-Video Data Erase
Format SD Card
Primary video
To turn on/off secondary audio
[DISPLAY]
>
select “Disc”
>
[
1
]
>
select
“Signal Type”
>
[OK]
>
set “Soundtrack” in
“Secondary Video” to “On” or “Off”
≥ During search/slow-motion or frame-by-frame, only the primary video is displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio Output” is set to “Off”, secondary audio will not be played ( > 31).
OK
RETURN
Format this SD Card.
6 Press [ 2 , 1 ] to select “Yes” and press [OK].
7 Press [ 2 , 1 ] to select “Start” and press [OK].
≥ To use the above functions, it is recommended that you format the card on this unit. If the SD card you use is formatted, all data on the card will be erased. It cannot be recovered.
≥ “BD-Live Internet Access” may need to be changed for certain discs
(
> 30) .
≥ When discs supporting BD-Live are played back, the player or disc IDs may be sent to the content provider via the Internet.
21
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 22 ページ 2010年1月21日 木曜日 午後8時9分
Regarding DivX
ABOUT DIVX VIDEO:
DivX ® is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified ® device must be registered in order to play
DivX Video-on-Demand (VOD) content.
To generate the registration code, locate the DivX VOD section in the device setup menu.
Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.
≥ It is not possible to playback DivX VOD content recorded on the USB device.
Display the unit’s registration code.
( > 33, “DivX Registration” in “Others”)
DivX Registration
The registration code is necessary to register this unit to play protected
DivX videos.
Registration Code: XXXXXXXXXX
Please register at www.divx.com/vod/
10 alphanumeric characters
∫ Displaying subtitle text
You can display subtitle text on the DivX video disc with this unit. This function has no relation to the subtitles specified in
DivX standard specifications and has no clear standard.
The operation might be different or it may not operate properly depending on the way the file was made or the state of this unit (playing, stopped, etc.).
Set “Subtitle” in “Disc” ( > 28)
≥ DivX video files that do not display “Text” do not contain subtitle text.
≥ If the subtitle text is not displayed correctly, try changing the language settings. ( > 30)
≥ After playing DivX VOD content for the first time, the registration code is not displayed.
≥ If you purchase DivX VOD content using a registration code different from this unit’s code, you will not be able to play this content. (“Authorization Error” is displayed.)
Cancel the unit’s registration.
( > 33, “DivX Registration” in “Others”)
Press [ 2 , 1 ] to select “Yes” in “DivX Registration”.
Use the deregistration code to cancel the registration in www.divx.com.
Regarding DivX VOD content that can only be played a set number of times
Some DivX VOD contents can only be played a set number of times. When you play this content, the number of times already played and initially playable number of times is displayed.
≥ The remaining number of plays decreases each time a program is played. However, when playing from the point where play was previously stopped, the remaining number of plays does not decrease due to the resume play function.
22
VQT2J87(ENG)
VQT2J87~Body_eng.fm 23 ページ 2010年1月26日 火曜日 午後2時41分
Enjoying 3D video
BD
You can enjoy powerful videos with realistic sensations of the
3D compatible video software by connecting this unit with an
HDMI cable to a 3D compatible TV.
≥ Please refrain from viewing 3D images if you do not feel well or are to view 3D images safely and comfortably.
In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.
≥ 3D images may not output as settings of “HDMI Resolution“ and “24p
Output“. ( > 32)
Preparation
Connect 3D compatible TV to an HDMI MAIN AV OUT terminal of this unit using an HDMI cable. ( > 8, 10)
≥ Perform the necessary preparations for the TV.
Method of playback is the same as normal disc playback.
( > 19)
3D settings
Perform the following settings as necessary.
Playback Method for 3D Disc
3D Type
HDMI(SUB)
Output Mode
3D Playback
Precautions
Pop-Out Level
You can play back 3D videos as 2D
(normal) videos. ( > 30)
If you cannot playback in 3D, change the settings as required by the connected TV format. ( > 32)
≥ Change the settings for 3D on the TV also when “Checker board” and “Side by side” are selected.
If the amplifier/receiver is connected to the HDMI SUB AV OUT terminal ( > 10), set to “V.OFF”. ( > 32)
≥ HDMI (SUB) V.OFF LED on this unit will light. ( > 31)
Hide the 3D viewing warning screen.
( > 30)
Adjust the pop-up position for the
Playback menu or message screen etc.
( > 29)
23
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 24 ページ 2010年1月21日 木曜日 午後8時9分
Playing still pictures
BD DVD CD SD USB
(BD-RE, DVD-RAM/-R/-R DL, CD-R/RW, SD Card,
USB device)
1
Insert a disc, SD card or USB device.
If the menu is displayed, press [ 3 , 4 ] to select the item and press [OK].
2
BD-RE, DVD-RAM
Press [
3
,
4
,
2
,
1
] to select the album and press [OK].
Album View DIRECT NAVIGATOR
DVD-RAM(VR) Video
Picture
106_DVD
Total 8
2006 9 12
Total 13
SUB
MENU
Previous
OK
R
RETURN
Video
Next
G Picture
Slideshow Page 02/02
B Y
Press [OK] to go to Picture View.
3
Press [
3
,
4
,
2
,
1
] to select the still picture and press [OK].
DIRECT NAVIGATOR
DVD-RAM(VR)
Picture View
0001
2006 9 12
0002 0003
Video Picture
0004
0005
0009
0006 0007 0008
Page 001/001
SUB
MENU
Play
RETURN
Press [ 2 , 1 ] to display the previous or next still picture.
To exit the screen
Press [TOP MENU/DIRECT NAVIGATOR].
∫ To show the picture properties
While playing, press [STATUS] twice.
e.g. JPEG on DVD-RAM
Shooting date
Photo 11/12/2007 Total 3/9
To exit the screen
Press [STATUS].
Useful functions
1
Press [SUB MENU].
2
Select an item, then press [OK].
While “Album View” or “Picture View” screen is displayed
Start
Slideshow
You can display still pictures one by one at a constant interval.
Slideshow
Settings
Display Interval
Change the display interval.
Transition Effect
Set display method.
Repeat Play
Repeat slideshow.
Soundtrack
The MP3 that is recorded on the USB device or the music CD can be played back as
Background Music during the slideshow.
Soundtrack Folder
A folder to play back can be selected when a
USB device with recorded MP3 is connected to this unit.
Select Root folder
Press [ 3 , 4 , 2 , 1 ] to select “Set” and press [OK].
To switch to another higher folder.
≥ Only if there is a multiple number of higher folders recognizable.
Select
Folder
To Video
To album view
To select the still pictures in another folder.
Playing video contents (
To display album view.
> 19).
While playing (except for slideshow)
Rotate Right
Rotate the still picture.
Rotate Left
Zoom out
Reduce the still picture.
≥ This function is only available for small-sized still pictures.
Zoom in Cancel “Zoom out”.
≥ Depending on the media and contents, displayed items are different.
≥ When a still picture with large number of pixels is played, the display interval may become longer. Even if the setting is changed, the display interval may not become shorter.
≥ When both the music CD and the USB device with recorded MP3 is inserted into this unit, the music CD has priority to be played back as
Background Music.
24
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 25 ページ 2010年1月21日 木曜日 午後8時9分
Playing music
DVD CD USB
(DVD-R/-R DL, music CD, CD-R/RW, USB device)
1
Insert a disc or USB device.
If the menu is displayed, press [ 3 , 4 ] to select the item and press [OK].
2
Press [
3
,
4
] to select the track and press
[OK].
DIRECT NAVIGATOR
CD
No.
01
02
03
04
05
Track1
Track2
Track3
Track4
Track5
Music list
0.09
Track1
5 Tracks / Total Play Time 20min54sec
Track Name Play Time
4min30sec
3min41sec
4min30sec
3min11sec
5min 2sec
4.30
Enjoying VIERA CAST
TM
You can access a selection of Internet services from the
Home screen with VIERA CAST, for example YouTube,
Picasa Web Albums. (Current as of December 2009)
Preparation
≥ Network connection ( > 12)
≥ Network setting ( > 15)
1
Press [VIERA CAST].
Message is displayed. Please read these instructions carefully and then press [OK].
2
Press [
3
,
4
,
2
,
1
] to select the item and press [OK].
Operable buttons:
[ 3 , 4 , 2 , 1 ], [OK], [RETURN], colored buttons, number buttons
VIERA CAST Home screen;
New York, NY
28 °
Weather
W 17 mph
Settings COMING SOON
Play
RETURN
“ ” indicates the track currently playing.
∫ Playing a track in another folder
1
While the “Music list” is displayed
Press [SUB MENU].
2
Press [
3
,
4
] to select “Select Folder” and press [OK].
≥ You cannot select folders that contain no compatible tracks.
Featured Videos
Featured Photos
COMING
SOON
Top Movie Rental
XXXXXX
Top TV Show
XXXXXX
Bloomberg
TELEVISION
XXX
XXX
XXX
7465.95
778.94
1442.82
15min. delay
-89.68
-9.47998
-25.15
Images are for illustration purposes, contents may change without notice.
To return to VIERA CAST Home screen
Press [VIERA CAST].
To exit from VIERA CAST
Press [EXIT], [FUNCTION MENU] or [TOP MENU/DIRECT
NAVIGATOR].
≥ In the following cases, settings are possible using “Internet Content
Settings” (
>
33)
– When restricting the use of VIERA CAST.
– When the audio is distorted.
– When wrong time is displayed
≥ If using slow Internet connection, the video may not be displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended.
≥ Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you will not be able to use the VIERA CAST TM function. ( > 17)
≥ VIERA CAST TM home screen is subject to change without notice.
≥ The services through VIERA CAST TM are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.
≥ All features of websites or content of the service may not be available.
≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may be presented in specific languages.
25
VQT2J87(ENG)
VQT2J87~Body_eng.fm 26 ページ 2010年1月26日 火曜日 午後9時33分
DLNA feature
[BDT350]
You can enjoy viewing video and pictures saved on a DLNA
Certified media server (such as a PC with Windows 7 installed etc.) connected to the home network with this unit.
≥ For the operation of equipment connected to the network, refer to their respective operating instructions.
Preparation
1 Perform network connection ( > 12) and network setting
( > 15).
2 Connect a DLNA Certified media server to the network.
Viewing of video and pictures on the equipment connected to this unit via the network
1 Press [FUNCTION MENU].
2 Press [
3
,
4
] to select “Network” and press [OK].
3 Press [
3
,
4
] to select “Home Network
(DLNA)” and press [OK].
≥ A list of equipment connected via the network is displayed.
≥ This list can be updated by pressing [R] on the remote control.
e.g.
Home Network (DLNA)
XXXXXX
≥ Discs or music cannot be played back. Also, depending on the equipment, playback of pictures may not be possible.
≥ Items displayed in gray on the display cannot be played back by this unit.
≥ This unit cannot be played back via connected equipment.
≥ Depending on the performance of the connected PC, video frames may be dropped during playback, or video may not playback at all.
Useful functions for when playing back pictures
The following operations are possible when playing back pictures from connected equipment.
While contents list is displayed
1 Press [SUB MENU].
2 Select an item, then press [OK].
Start
Slideshow
Slideshow
Settings
You can display still pictures one by one at a constant interval.
Display Interval
Change the display interval.
Repeat Play
Repeat slideshow.
Press [ 3 , 4 , 2 , 1 ] to select “Set” and press [OK].
While playing
1 Press [SUB MENU].
2 Select an item, then press [OK].
Show the picture properties ( > 24).
Status
Rotate Right
(except for slideshow)
Rotate Left
(except for slideshow)
Rotate the still picture.
OK
RETURN
Update
Servers found on the network are displayed.
Please select one.
4 Press [
3
,
4
] to select the equipment to playback the contents, and press [OK].
5 Press [
3
,
4
,
2
,
1
] to select the item to playback (folder), and press [OK].
≥ Menu structure will be different depending on the equipment connected to this unit. Select the contents by repeating the operation.
≥ Control Panel is displayed once the playback starts.
Operation can be performed with [ 3 , 4 , 2 , 1 ], [OK] and [EXIT].
Control Panel e.g.
Exit
≥ Press [OK] if the Control Panel is not displayed.
≥ Press [RETURN] to hide the Control Panel.
26
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 27 ページ 2010年1月18日 月曜日 午後5時27分
Linked operations with the TV
(VIERA Link TM “HDAVI Control TM ”)
What is VIERA Link “HDAVI Control”?
VIERA Link TM is a new name for EZ Sync TM .
VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a
Panasonic TV (VIERA) or amplifier/receiver under
“HDAVI Control”.
You can use this function by connecting the equipment with an HDMI cable*. See the operating instructions for connected equipment for operational details.
* Only when connecting via an HDMI MAIN AV OUT terminal on this unit.
Preparation
1 Set “VIERA Link” to “On” ( > 32). (The default setting is
“On”.)
2 Set the “HDAVI Control” operations on the connected equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so that the “HDAVI Control” function works properly.
Also when the connection or settings are changed, repeat this procedure.
Automatic input switching
Power on link
When the following operations are performed, the television will automatically switch the input channel and display the corresponding action. When the television is off, the television will automatically turn on.
– When play starts on the unit
– When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
Easy control only with VIERA remote control
Only TV supports “HDAVI Control 2” or later
By using the TV remote control, you can play discs using the
“Control Panel” and display the Top Menu or Pop-up Menu, etc.
1
Press [SUB MENU].
2
Select an item, then press [OK].
Control Panel
Screen Aspect
Top Menu
Pop-up Menu
SUB
MENU
OK
RETURN
≥ The sub menu may not appear while the Top Menu for BD-Video or DVD-Video is displayed.
≥ The buttons that you can use for this unit vary depending on the TV. For details, refer to the operating instructions of the TV.
≥ The operation of this unit may be interrupted when you press incompatible buttons on the TV remote control.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009) for Panasonic’s HDAVI Control compatible equipment. This standard is compatible with Panasonic’s conventional HDAVI equipment.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
≥ Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.
Power off link
All connected equipment compatible with “HDAVI Control”, including this unit, automatically turns off when you switch the television off.
Playing music continuously even after turning off power to the television
When the unit is connected to a Panasonic TV (VIERA) that supports HDAVI Control 2 or later and an amplifier/receiver supports VIERA Link.
1 While playing music
Press [SUB MENU].
2 Press [ 3 , 4 ] to select “TV Power” and press [OK].
27
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 28 ページ 2010年1月26日 火曜日 午後1時52分
Settings
Playback menu
1
Press [DISPLAY].
e.g., BD-Video
Disc
Play
Video
Audio
Signal Type
Subtitle
Subtitle Style
Off
-
Main
Angle
1ENG
-
Menus Items Settings
2
Press [
3
,
4
] to select the menu and press
[
1
].
3
Press [
3
,
4
,
2
,
1
] to select the item and press [
1
].
4
Press [
3
,
4
] to select the setting.
Some items can be changed by pressing [OK].
To exit the screen
Press [DISPLAY].
Depending on the condition of the unit (playing, stopped, etc.) and media contents, there may be some items that you cannot select or change.
Regarding Language, Audio attribute and video attribute :
( > 42)
Disc
Signal Type
Primary Video
Video
The recording method of original video appears.
Soundtrack Select the type of audio or language.
Secondary Video
Video
Select on/off of images. The recording method of original video appears.
Soundtrack Select on/off of audio and the language.
Video
The recording method of original video appears.
Soundtrack
Show or change the soundtrack.
Subtitle
Turn the subtitle on/off, and change the language depending on the media.
Subtitle Style
Select the subtitle style.
Audio channel
Select the audio channel number.
( > 19, “Changing audio”)
Angle
Select the number of the angle.
Some items may be changed only on the disc specific menu.
( > 19)
28
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 29 ページ 2010年1月21日 木曜日 午後8時9分
Play
Repeat Play
(Only when the elapsed time is being displayed on the unit’s display.)
Select the item which you want to repeat. The items displayed differ depending on the type of media.
Select “Off” to cancel.
Random
Select whether or not to play random.
Playback Information Window
Displays the following.
Audio/video attribute information of disc.
*&/+
Settings status of “Digital Audio Output” ( > 31).
HDMI output information.
(First: HDMI(MAIN), Second: HDMI(SUB))
Press [RETURN] to exit.
Pop-Out Level
(Only when “Full HD” is selected in “3D Type” ( > 32).)
Pop-up position for the Playback menu or message screen etc. can be adjusted.
Video
Picture
Select the picture quality mode during play.
≥ If you select “User”, you can make further adjustments.
Press [ 1 ] to select “Picture Adjustment” and press [OK].
≥ 3D NR:
Reduces the rough noise in the background to give a greater feeling of depth.
When “24p Output” is set to “On”, this function may not operate. ( > 32)
≥ Integrated NR :
Smoothes block noise and reduces the smudging that appears around contrasting sections of the picture.
Advanced Settings
Chroma Process
The high-resolution processing of HDMI chroma signals produces a high-resolution picture with rich picture quality.
Detail Clarity
The picture is sharp and detailed.
Super Resolution
Pictures of normal image quality are corrected to sharp and detailed images when output as 1080i/1080p from HDMI AV
OUT or COMPONENT VIDEO OUT.
Progressive
Select the method of conversion for progressive output to suit the type of material being played.
≥ When the content is distorted change the settings from
“Auto“ to “Video”.
24p
Movies and other material recorded on DVD-Video at 24p are output at 24p.
≥ Only when you have selected “On” in “24p Output” ( > 32).
Audio
Sound Effects
*1, *2
Select the sound effect.
≥ Digital Tube Sound :
This feature gives you warm sound, like that produced by a vacuum tube amplifier.
≥ Re-master :
This feature gives you brighter sound by increasing the high frequency portion of the audio. (Discs recorded at 48 kHz or less)
Recommended setting
Re-master 1
Re-master 2
Re-master 3
Pop and rock
Jazz
Classical
≥ Night Surround :
Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily.
Dialog Enhancer
*2
The volume of the center channel is raised to make dialog easier to hear.
High Clarity Sound
When connected to TV via the HDMI terminal for outputting image, it produces clearer sound.
≥ Only when you have selected “Enable” in “High Clarity
Sound” ( > 31).
*1
*2
Not every function can be set individually.
This function is effective for audio from the HDMI terminal or the
COAXIAL /OPTICAL terminal only when “Digital Audio Output” is set to
“PCM” ( > 31). (However, in this case, audio is output as 2ch from the
COAXIAL /OPTICAL terminal.)
29
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 30 ページ 2010年1月26日 火曜日 午後1時52分
Setup menu
Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.
1
While stopped
Press [SETUP].
Setup
Disc
Video
Audio
Display
TV / Device Connection
Network
Others
OK
RETURN
2
Press [
3
,
4
] to select the menu and press
[OK].
3
Press [
3
,
4
] to select the item and press
[OK].
If there are any other items, repeat these steps.
4
Press [
3
,
4
,
2
,
1
] to select the option and press [OK].
To exit the screen
Press [SETUP].
≥ There may be differences in operation methods. If this happens, follow the on-screen instructions for the operation.
About the password
The password of the following items are common.
Don’t forget your password.
≥ “DVD-Video Ratings”
≥ “BD-Video Ratings”
≥ “Lock” ( > 33)
Disc
DVD-Video Ratings
Set a ratings level to limit DVD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit password with the number buttons when the password screen is shown.
BD-Video Ratings
Set an age limit of BD-Video play.
≥ Follow the on-screen instructions. Enter a 4-digit password with the number buttons when the password screen is shown.
Playback Method for 3D Disc
Select the playback method of 3D compatible video software.
3D Playback Precautions
Set to display or hide the 3D viewing warning screen when playing back the 3D compatible video software.
Audio Language
Choose the language for audio.
≥ If “Original” is selected, the original language of each disc will be selected.
≥ Enter a code ( > 42) with the number buttons when you select “Other ¢¢¢¢ ”.
Subtitle Language
Choose the language for the subtitle.
≥ If “Automatic” is selected and the language selected for
“Audio Language” is not available, subtitles of that language will automatically appear if available on that disc.
≥ Enter a code ( > 42) with the number buttons when you select “Other ¢¢¢¢ ”.
Menu Language
Choose the language for the disc menus.
≥ Enter a code ( > 42) with the number buttons when you select “Other ¢¢¢¢ ”.
BD-Live Internet Access (
>
21)
You can restrict Internet access when BD-Live functions are used.
≥ If “Allow (Limited)” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates.
DivX Subtitle Text
Select a suitable item according to the language used for DivX subtitles text ( > 22).
≥ This item is displayed only after playing back a file.
Video
Still Mode (paused video)
Select the type of picture shown when you pause playback.
Auto Automatically selects the type of picture shown.
Field Select if jittering occurs when “Auto” is selected.
Frame
Select if small text or fine patterns cannot be seen clearly when “Auto” is selected.
Seamless Play
The chapter segments in playlists are played seamlessly.
≥ Select “On”, when the picture freezes for a moment at the chapters segment in playlists.
Black Level Control
Select lighter or darker for adjusting the black level control to the desired setting for picture enhancement.
30
VQT2J87(ENG)
VQT2J87~Body_eng.fm 31 ページ 2010年1月26日 火曜日 午後2時41分
Audio
Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output (
>
38)
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
≥ Select “ PCM ”, when the connected equipment cannot decode the respective audio format.
≥ Not making the proper settings may result in noise.
BD-Video Secondary Audio
Select whether to mix or not mix the primary audio and secondary audio (including the button click sound).
( > 21)
≥ If “ Off ” is selected, the unit outputs the primary audio only.
PCM Down Conversion
Select how to output audio with a sampling frequency of
96 kHz for the PCM output from the DIGITAL AUDIO OUT.
≥ If “
On
” is selected, the signals that are converted to 48 kHz are output.
≥ If “Off” is selected, and the connected equipment does not support 96 kHz, the sound will not be output normally.
≥ Signals are converted to 48 kHz despite the settings in the following cases:
– when the signals have a sampling frequency of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On”
Downmix
Select the downmix system of multi-channel to 2 channel sound.
≥ Select “ Surround encoded ”, when the connected equipment supports the virtual surround function.
≥ There is no effect on “Bitstream” via HDMI AV OUT and
DIGITAL AUDIO OUT.
≥ The audio will be output in “Stereo” in the following cases;
– AVCHD playback
– Playback of secondary audio (including the button click sound).
7.1ch Audio Reformatting
Surround sound with 6.1ch or less is automatically expanded and played back at 7.1ch.
≥ If “Off” is selected, sound is played over the original number of channels. (Note that in the case of 6.1ch audio, playback will be at 5.1ch.)
Audio reformatting is enabled in the following cases:
≥ When you have selected “PCM” in “Digital Audio Output”.
≥ When the audio is Dolby Digital, Dolby Digital Plus, Dolby
TrueHD or LPCM.
High Clarity Sound
When connected to TV via the HDMI terminal for outputting image, it produces clearer sound.
≥ Set to “Enable” and then set “High Clarity Sound” on the
Playback menu to “On”. ( > 29)
Audio Delay
Mis-sync between the video and audio is corrected by delaying the audio output.
Display
Status Messages
Choose whether to show status messages automatically.
On-screen Language
Choose the language for menus and on-screen messages.
Screen Saver Function
This is to prevent burn-in on the screen.
≥ When this is set to “On”:
If there is no operation for 10 minutes or more, Direct
Navigator screen switches to FUNCTIONS screen automatically.
≥ While playing and pausing, etc., this function is not available.
≥ As for Music [CD-DA] or MP3, regardless of the setting, if there is no operation for a while, Direct Navigator screen switches to the other states automatically.
FL Display
Changes the brightness of the unit’s display.
≥ If “Auto” is selected the display is dimmed during playback and bright not during playback.
SD Card LED Control
Set the lighting method for the SD card LED.
≥ If “SD inserted” is selected, and this unit is turned on and
SD card is inserted, the lamp is lighted.
HDMI(SUB) V.OFF LED Control
Set to light the HDMI (SUB) V.OFF LED or not.
≥ This will light when “HDMI(SUB) Output Mode” ( > 32) is set to “V.OFF”, and the power of the connected equipment to the HDMI SUB AV OUT is on.
License
Information about the software used by this unit is displayed.
31
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 32 ページ 2010年1月26日 火曜日 午後1時52分
TV / Device Connection
3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when “Checker board” and “Side by side” are selected.
TV Aspect
Set to match the type of television connected.
When connected to a 4:3 aspect television and playing 16:9 ratio image:
4:3 Pan &
Scan
The sides are cut off so the picture fills the screen.
When playing BD-Video, video is output as “4:3
Letterbox”.
4:3 Letterbox
Black bands appear at the top and bottom of the picture.
When connected to a 16:9 widescreen television and playing 4:3 ratio image:
16:9
16:9 Full
Video is displayed as a 4:3 ratio image in the center of the screen.
Video is displayed as a horizontally stretched 16:9 image.
HDMI Connection
Press [OK] to show the following settings:
HDMI Video Mode
Select “On” when video is output from HDMI AV OUT terminal.
On
Off
Images are output from the HDMI terminal in the resolution set in “HDMI Resolution”.
Images are output in the resolution set in
“Component Video Resolution”.
HDMI(SUB) Output Mode
Set to output the video from the HDMI SUB AV OUT terminal or not.
HDMI Resolution
The items supported by the connected devices are indicated on the screen as “ ¢ ”. When any item without “ ¢ ” is selected, the images may be distorted.
≥ If “Auto” is selected, automatically selects the output resolution best suited to the connected television.
≥ To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible
HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, it must also be
1080p compatible.
24p Output
When this unit is connected to a TV supporting 1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p.
≥ When playing DVD-Video, set to “On” and then also set
“24p” in “Video” ( > 29) to “On”.
≥ When BD-Video images other than 24p are played, images are output at 60p.
HDMI Color Mode
This setting is for selecting color-space conversion of the image signal when the unit is connected using an HDMI cable.
HDMI Audio Output
This setting selects whether or not to output audio from
HDMI.
≥ Select “Off” when the TV is connected to this unit via an
HDMI terminal, and this unit is also connected to other devices, such as an amplifier/receiver via a COAXIAL or an OPTICAL terminal.
VIERA Link
Set to use “HDAVI Control” function when connected with an HDMI cable to a device that supports “HDAVI Control”.
≥ Select “Off” when you do not want to use “HDAVI Control”.
Deep Color Output
This setting is for selecting whether to use Deep Color output when a television that supports Deep Color is connected.
Contents Type Flag
Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected.
Component Video Resolution
This sets the video output resolution when connected via the
COMPONENT VIDEO OUT terminal.
≥ Even if you select “720p” or “1080i”, the video output resolution is restricted to “480p” when images of DVD-Video discs are output from the COMPONENT VIDEO OUT terminals.
Analog Audio Output
You can set the optimum multi-channel surround sound for your speakers from this unit when the settings cannot be adjusted from a connected amplifier/receiver with AUDIO
OUT terminals.
Select “2ch (Downmix) + 5.1ch” or “7.1ch” and press [OK], and then set the following options.
– Speaker presence and size (
L C R
SW
LS RS LB RB
)
– Delay time ( ms
0.0
)
– Channel balance ( dB
0.0
)
To finish the speaker setting
Press [ 3 , 4 , 2 , 1 ] to select “Complete” and press [OK].
32
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 33 ページ 2010年1月21日 木曜日 午後8時9分
Network
Network Easy Setting (
>
15)
Network Settings
Perform network-related settings individually.
Press [OK] to show the following settings:
LAN Connection Mode
Select connection method.
Access Point Connection Setting
This allows the Wireless router (Access point) and connection settings to be set and the current connection settings and connection state to be checked when a wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard will be displayed.
Double Speed Mode Setting (2.4GHz) [BDT350]
When a 2.4 GHz wireless format is used, this setting sets the connection speed.
≥ If you connect using the “Double Speed Mode(40MHz)”,
2 channels use the same frequency band, and there is consequently a greater risk of reception interference.
This can cause the connection speed to drop or the connection to become unstable.
IP Address/DNS Settings
This is for checking the state of the network connection and setting the IP address and DNS-related.
Press [OK] to show the respective setting.
≥ “Connection Speed Setting” is enabled only when “Auto
Detect Connection Speed” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (
>
25) (VIERA CAST)
Press [OK] to show the following settings:
Lock
You can restrict the usage of VIERA CAST.
≥ Follow the on-screen instructions. Enter a 4-digit password with the number buttons when the password screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is adjusted automatically to the standard volume while using the VIERA CAST.
≥ Depending on contents, this function effect will not work.
≥ Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s time to match your location.
≥ Some VIERA CAST contents require the time zone to be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
Others
Off Timer
Select how long the unit remains on when it is not being used.
Remote Control Code
Change the remote control code, when other Panasonic products react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥ Internal control unit will be powered when it is set to “On”, so contents of the following will be different from the time it is set to “Off”.
– Idle power consumption will increase. (about the power consumption > 43)
– The cooling fan may turn slowly to prevent overheating of internal parts.
Easy Setting
You can execute basic settings (“On-screen Language”, “TV
Aspect”, “Analog Audio Output”, “Quick Start”)
Restore Default Settings
This returns all values in the Setup menu and the Playback menu, except for “Remote Control Code”, “On-screen
Language”, “IP Address/DNS Settings”, “Proxy Server
Settings”, “Lock”, “DVD-Video Ratings” and “BD-Video
Ratings” to the default settings.
DivX Registration (
>
22)
You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content.
System Information
Display firmware version of this unit, wireless LAN module of your Wireless LAN Adaptor.
Firmware Update (
>
17)
Press [OK] to show the following settings:
Automatic Update Check
When this equipment remains connected to the Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.
Update Now
You can update the firmware manually.
33
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 34 ページ 2010年1月21日 木曜日 午後8時9分
Reference
Troubleshooting guide
Before requesting service, please perform the following steps.
Do you have the latest firmware installed?
Firmware updates may be released to correct operating irregularities that are discovered with certain movies.
( > 17)
4
Make the following checks and visit our website for more information.
For USA : http://www2.panasonic.com/consumer-electronics/support/
Enter the model number.
For Canada : http://www.panasonic.ca
4
Even so, you still have trouble,
Visit our website to find a service center.
You can find a service center near you easily on our website.
Other support information :
“Customer Services Directory (United States and Puerto
Rico)” ( > 46) or “Limited Warranty (Only for
CANADA)” ( > 47).
The following do not indicate a problem with this unit:
≥ Regular disc rotating sounds.
≥ Image disturbance during search.
∫ Unit doesn’t respond to remote control or front panel buttons.
Press and hold [POWER Í /I] on the main unit for 3 seconds.
– If still unable to power the unit off, disconnect the power cord, wait 1 minute, then reconnect the power cord.
∫ Cannot eject disc.
The unit may have a problem.
1 While the unit is off, press and hold [OK], [B] and [Y] on the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1 ] (right) on the remote control or
[POWER Í /I] on the unit until “06 FTO” is displayed on the unit's display.
3 Press [OK] on the remote control or [ < OPEN/CLOSE] on the unit.
General operation
To return to the factory preset.
¾ Select “Yes” in “Restore Default Settings” in the Setup menu. ( > 33)
To return all settings to the factory preset.
¾ Reset the unit as follows:
1 While the unit is off, press and hold [OK], [B] and [Y] on the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1 ] (right) on the remote control or
[POWER Í /I] on the unit until “08 FIN” is displayed on the unit's display.
3 Press and hold [OK] on the remote control or [ < OPEN/
CLOSE] on the unit for at least 3 seconds.
Power of this unit is turned off when the input for the TV is switched.
¾ This is a normal phenomenon when using VIERA Link
(HDAVI Control 4 or later). For details please read the operating instructions for the TV.
The remote control doesn’t work properly.
¾ The remote control and main unit are using different codes. Change the code on the remote control. ( > 33)
¾ It may be necessary to set the manufacturer code or the remote control code again after changing the batteries for the remote control. ( > 17)
The TV tuner mode is not displayed when the
TV is switched on.
¾ This phenomenon may occur, depending on the TV setting, when “Quick Start” is set to “On”.
– Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
¾ The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1 ] (right) on the remote control or
[POWER Í /I] on the unit until “03 VL” is displayed on the unit's display.
3 Press [OK] on the remote control or [ < OPEN/CLOSE] on the unit.
34
VQT2J87(ENG)
VQT2J87~Body_eng.fm 35 ページ 2010年1月26日 火曜日 午後2時41分
Picture
The images from this unit do not appear on the television.
Picture is distorted.
¾ An incorrect resolution is selected in “Component Video
Resolution” or “HDMI Resolution”. Reset the setting as follows:
1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the unit’s display.
2 Repeatedly press [ 1 ] (right) on the remote control or
[POWER Í /I] on the unit until “04 PRG” is displayed on the unit's display.
3 Press and hold [OK] on the remote control or [ < OPEN/
CLOSE] on the unit for at least 3 seconds.
Set the item again. ( > 32)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select “Yes” in “Restore Default
Settings” and make proper settings. ( > 33)
Video is not output
.
¾ Set the “High Clarity Sound” in the Playback menu to “Off” to use the COMPONENT VIDEO OUT terminal or the
VIDEO OUT terminal. ( > 29)
¾ Video from the HDMI SUB AV OUT terminal is not output when the “HDMI(SUB) Output Mode” is set to “V.OFF”.
( > 32)
Video is not output in high-definition.
¾ Confirm that the “HDMI Video Mode”, “HDMI Resolution”, and “Component Video Resolution” in the Setup menu are set properly. ( > 32)
3D video is not output.
¾ Is there a non-3D compatible amplifier/receiver connected between this unit and a TV? ( > 10)
¾ If there is a non-3D compatible amplifier/receiver connected to the HDMI SUB AV OUT terminal, set the
“HDMI(SUB) Output Mode” to “V.OFF”. ( > 10)
¾ Are the settings on this unit and the TV correct? ( > 23)
¾ Is the amplifier/receiver connected to between this unit and TV on?
No subtitles.
¾ When progressive output is on, closed captions/subtitles cannot be displayed.
The subtitles overlap closed captions recorded on discs.
¾ Turn off the subtitles or turn off the closed caption setting on the TV.
( > 28)
A black band is displayed around the edge of the screen.
The aspect ratio of the screen is abnormal.
¾ Confirm the “TV Aspect” is set properly. ( > 32)
¾ Adjust the aspect setting on the television.
(Adjustment using “Screen Aspect” ( > 20) on the unit is also possible)
Audio
Cannot switch audio.
¾ When connecting an amplifier/receiver using a COAXIAL /
OPTICAL terminal or an HDMI terminal, you cannot switch the audio if “Digital Audio Output” is set to
“Bitstream”. Set “Digital Audio Output” to “PCM” or connect using AUDIO OUT terminal. ( > 11, 31)
Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio Output” settings. ( > 31)
¾ When the unit is connected to an amplifier/receiver with the AUDIO OUT terminal, set “Analog Audio Output”.
( > 32)
¾ To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. ( > 32)
¾ When connecting this unit to a TV via an HDMI MAIN AV
OUT and to an amplifier/receiver via an HDMI SUB AV
OUT, set “HDMI(SUB) Output Mode” to “V.OFF”. ( > 10)
35
VQT2J87 (ENG)
DMP-BDT300_VQT2J87_eng.book 36 ページ 2010年1月21日 木曜日 午後8時9分
Playback
Disc cannot be played.
¾ The disc is dirty. ( > 4)
The contents of the USB device cannot be read.
¾ USB devices connected using a USB extension cable other than the one included or a USB hub may not be recognized by this unit.
¾ If inserted during playback the USB device may not be recognized by this unit.
¾ If two USB devices other than Wireless LAN adaptor are connected simultaneously, they will not be recognized by this unit.
Still pictures (JPEG) do not play back normally.
¾ The images that were edited on the PC, such as
Progressive JPEG, etc., may not play back.
I can’t play back BD-Live.
¾ The SD card is write-protected. ( > 7)
¾ Confirm that this unit is connected to the broadband
Internet. ( > 12)
¾ Confirm the “BD-Live Internet Access” settings. ( > 30)
¾ Confirm an SD Card is inserted into the SD Card slot.
( > 18)
Network
I can’t connect to the network.
¾ Confirm the network connection and settings. ( > 12, 33)
¾ Check the operating instructions for each device and connect accordingly.
When using Wireless LAN connection, video from the DLNA Certified media server is not played back or video frames are dropped during playback.
[BDT350]
¾ Higher transfer rate router such as 802.11n (2.4 GHz or 5
GHz) Wireless router (Access Point) may solve the problem. If you use 802.11n (2.4 GHz or 5 GHz) Wireless router (Access Point), it is necessary to set the encryption type to “AES”.
Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems.
¾ On the “Access Point Connection Setting” screen ( > 33), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection. If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your Wireless router
(Access point) and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Network Easy Setting” ( > 15) again.
36
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 37 ページ 2010年1月18日 月曜日 午後5時27分
Messages
The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use.
On the television
Cannot play.
¾ You inserted an incompatible disc (Discs recorded in PAL video, etc.).
Cannot display on this unit.
¾ You tried to play a non-compatible image.
¾ Confirm “SD” on the unit’s display is not blinking and re-insert the card.
No disc is inserted.
¾ The disc may be upside down.
$
This operation is not available.
¾ Some operations are unsupported by the unit. For example;
– BD-Video: During playback, reverse slow-motion or reverse frame-by-frame is not possible.
IP address is not set.
¾ The “IP Address” in “IP Address/DNS Settings” is “---. ---.
---. ---”. Set the “IP Address”, “Subnet Mask”, and “Default
Gateway”. (Select the automatic address acquisition if necessary.)
The current security setting of Wireless LAN is low. It is recommended to change the setting.
[BDT350]
¾ Authentication type for the Wireless LAN is set to “Open system”, or the encryption type is set to “No encryption”. It is recommended to encrypt for safety reasons. For details, refer to the instructions of the Wireless router being used. Encryption is required when playing back video, etc., from DLNA compatible devices.
On the unit’s display
F99
¾ The unit fails to operate properly. Press [POWER Í /I] on the main unit to switch the unit to standby for 3 seconds.
Now press [POWER Í /I] on the main unit again to turn the unit on.
HDMI ONLY
¾ Some BD-Video discs can only be output with HDMI.
NET
¾ Displays while VIERA CAST is starting up.
No PLAY
¾ There is a viewing restriction on a BD-Video or
DVD-Video. ( > 30)
No READ
¾ The media is dirty or badly scratched. The unit cannot play.
PLEASE WAIT
¾ The unit is carrying out an internal process. This is not a malfunction. You cannot operate the unit while “PLEASE
WAIT” is displayed.
REMOVE
¾ The USB device is drawing too much power. Remove the
USB device.
SET
(“ ” stands for a number.)
¾ The remote control and main unit are using different codes. Change the code on the remote control.
Press and hold [OK] and the indicated number button at the same time for more than 5 seconds.
U59
¾ The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.
Select a position with good ventilation when installing the unit. Do not block the cooling fan on the rear of the unit.
U72
U73
¾ The HDMI connection acts unusually.
– Turn the unit and TV off.
– Disconnect the HDMI cable between the player and the
TV.
H
or F
(“ ” stands for a number.)
¾ There is something unusual.
¾ Check the unit using the troubleshooting guide. If the service number does not disappear, do the following.
1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.
2 Press [POWER Í /I] to turn the power on.
If the service number does not disappear despite doing the above, request service from the dealer. Inform the dealer of the service number when requesting service.
START
¾ The system is being restarted during the firmware update.
Please do not turn off power.
UPD
/
(“ ” stands for a number.)
¾ The firmware is being updated.
Please do not turn off power.
FINISH
¾ The firmware update is complete.
37
VQT2J87 (ENG)
DMP-BDT300_VQT2J87_eng.book 38 ページ 2010年1月18日 月曜日 午後5時27分
Audio Information
About audio from audio output terminals
The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. ( > 31,
Digital Audio Output)
≥ The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT/DIGITAL AUDIO OUT (Coaxial/Optical)
Terminal
“Dolby D/Dolby D +/Dolby
TrueHD”/“DTS/DTS-HD”
“BD-Video Secondary Audio”
“Bitstream” *1
“On” *3
HDMI AV OUT
“Off”
“PCM” *2
“On” *4 “Off”
DVD-Video : 5.1ch PCM
Dolby Digital/
Dolby Digital EX *5
Dolby Digital
BD-Video : 7.1ch PCM *7
Dolby Digital Plus/
Dolby TrueHD
7.1ch PCM
DTS Digital Surround/
DTS-ES *5
Outputs using original audio
DVD-Video : 5.1ch PCM
BD-Video : 7.1ch PCM *8
DTS Digital
Surround
DTS-HD High Resolution
Audio/
DTS-HD Master Audio
7.1ch LPCM 7.1ch PCM
7.1ch PCM *8
AUDIO OUT
Terminal 7.1ch AUDIO OUT
5.1ch AUDIO
OUT
“On”/“Off”
2ch AUDIO
OUT
“On”/“Off” “BD-Video Secondary Audio”
Dolby Digital/
Dolby Digital EX
Dolby Digital Plus/
Dolby TrueHD
DTS Digital Surround/
DTS-ES
DTS-HD High Resolution
Audio/
DTS-HD Master Audio
7.1ch LPCM
“On” *4 /“Off”
DVD-Video : 5.1ch
BD-Video : 7.1ch
*7
7.1ch
DVD-Video : 5.1ch
BD-Video : 7.1ch
*8
7.1ch
*8
7.1ch
5.1ch
2ch
DIGITAL AUDIO OUT
“Bitstream” “PCM”
“On”/“Off” “On”/“Off”
Dolby Digital/
Dolby Digital
EX *6
Dolby Digital
DTS Digital
Surround/
DTS-ES *6
Down-mixed
2ch PCM
DTS Digital
Surround
Down-mixed 2ch PCM
*1
*2
*3
*4
*5
*6
*7
*8
When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Digital Surround bitstream or down-mixed 2ch PCM (e.g., TV).
When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if “BD-Video Secondary Audio” was set to
“Off”.
When playing BD-Video with secondary audio or button click sound, the audio is output as 5.1ch.
With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio decoded as DTS
Digital Surround, and DTS-ES recorded to BD-Video becomes PCM audio decoded as DTS-ES.
When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital Surround, however if playing BD-Video without secondary audio or button click sound, the audio is output as the original format.
When BD-Video is played and “7.1ch Audio Reformatting” is set to “Off”, the audio is output as 5.1ch.
The audio output is amplified from 5.1ch or 6.1ch to 7.1ch depending on the DTS, Inc. specifications.
38
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 39 ページ 2010年1月26日 火曜日 午後1時52分
Recommended audio output setting
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of the items.
Press [SETUP]
>
“Audio”
>
Set each item
For details of the each item, refer to page 31.
Setup menu
TV via HDMI *1
Example of connected equipment
Receiver with
HD audio *2 decoder via
HDMI
Receiver without
HD audio *2 decoder via
HDMI
Receiver via
COAXIAL or
OPTICAL
“Dolby D/Dolby
D +/Dolby
TrueHD”
“Digital
Audio
Output”
“DTS/DTS-HD”
“BD-Video
Secondary
Audio”
“PCM Down Conversion”
“PCM”
“PCM”
“Off”
“Bitstream”
“Bitstream”
“Off”
“PCM”
“PCM”
“Off”
“PCM”
“PCM”
“Off”
No effect No effect No effect “Off” *4
“Downmix”
“High Clarity Sound”
“Stereo”
“Enable”
No effect
“Disable” *6
No effect
“Disable” *6
“Stereo”
“Disable”
*1
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
*2
*3
*4
*5
*6
If connected to TV via the COAXIAL, OPTICAL or AUDIO OUT terminal, these settings have no effect.
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (Press [SETUP] > TV / Device Connection)
If the connected equipment that does not support 96 kHz, set to “On”.
If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
When connected to TV via the HDMI terminal for outputting image, set to “Enable”.
*5
*6
Receiver via analog output *3
No effect
No effect
“Off”
No effect
No effect
“Disable” *6
39
VQT2J87 (ENG)
DMP-BDT300_VQT2J87_eng.book 40 ページ 2010年1月21日 木曜日 午後8時9分
About MP3/JPEG/DivX/
AVCHD/MPEG2 files
MP3
File format
Reference
MP3
Extension
Files must have the extension “.mp3” or
“.MP3”.
Compression rate
32 kbps to 320 kbps
Sampling rate 44.1 kHz/48 kHz
ID3 tags: version 1, 2.2, 2.3, 2.4
(Only titles and the names of artists)
JPEG
File format
Extension
Picture resolution
JPEG
Files must have the extension “.jpg” or
“.JPG”.
between 34 k 34 and 8192 k 8192 pixels
(sub sampling is 4:2:2 or 4:2:0)
Reference
JPEG conforming DCF* is supported.
≥ MOTION JPEG and Progressive JPEG is not supported
* Design rule for Camera File system: unified standard established by Japan Electronics and Information
Technology Industries Association (JEITA).
≥ DVD-RAM must conform to UDF 2.0.
≥ BD-RE must conform to UDF 2.5.
DivX
File format
Extension
DivX
Files must have the extension “.DIVX”,
“.divx”, “.AVI” or “.avi”.
Picture resolution
Up to 1920 k 1080 pixels
Reference
≥ DivX certified to play DivX video up to HD
1080p, including premium content.
Video
– Number of streams: Up to 1
– Codec: DIV3, DIV4, DIVX, DX50, DIV6
– FPS (Frame Per Second): Up to 60 fps
Audio
– Number of streams: Up to 8
– Format: MP3, MPEG, Dolby Digital
– Multi channel: Dolby Digital is possible.
MPEG multi is 2 ch conversion.
≥ GMC (Global Motion Compensation) is not supported.
≥ DVD-R and DVD-R DL must conform to UDF 1.02 without
ISO9660 and UDF 1.5 with ISO9660.
≥ BD-R must conform to UDF 2.5.
Subtitles text file of DivX
File format
Extension
Reference
Subtitles text file of DivX
MicroDVD, SubRip, or TMPlayer
Files must have the extension “.SRT”,
“.srt”, “.SUB”, “.sub”, “.TXT” or “.txt”.
≥ The DivX video file and subtitles text file are inside the same folder, and the file names are the same except for the file extensions.
≥ Depending on the methods used to create the file or the state of the recording, only parts of the subtitles may be displayed, or the subtitles may not be displayed at all.
AVCHD
File format
AVCHD format (V1.0) used on High
Definition Video Camera
(Panasonic and some others)
Codec MPEG-4 AVC/H.264
≥ Discs must conform to UDF 2.5.
MPEG2
File format
SD-Video format * used on Standard
Definition Video Camera
(Panasonic and some others)
Codec MPEG2
* SD-Video Entertainment Video Profile
≥ With certain recording states and folder structures, the play order may differ or playback may not be possible.
≥ CD-R, CD-RW : ISO9660 level 1 or 2 (except for extended formats), Joliet
This unit is compatible with multi-session.
This unit is not compatible with packet writing.
≥ DVD-R, DVD-R DL (except for AVCHD) : ISO9660 level 1 or 2 (except for extended formats), Joliet, UDF bridge (UDF 1.02/ISO9660)
This unit is not compatible with multi-session.
This unit is not compatible with packet writing.
40
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 41 ページ 2010年1月18日 月曜日 午後5時27分
Structure of folders that can be played in this unit
You can play files on this unit by structure of folders as shown below. However depending on the method of writing data (writing software), play may not be in the order you numbered the folders.
Folder which can be displayed with this unit
¢¢¢ : Numbers
XXX: Letters
*1
*2
*3
¢¢¢ : from 001 to 999
¢¢¢ : from 100 to 999
XXXXX: 5 figures
¢¢¢¢ : from 0001 to 9999
XXXX: 4 figures
Structures of still picture (JPEG) folders in DVD-R * 4 /DVD-R DL * 4 /CD-R * 5 /CD-RW * 5
Files inside a folder are displayed in the order they were updated or taken.
Root e.g.,
P0000001 .jpg
P0000002 .jpg
Folder A
P0000003 .jpg
P0000004 .jpg
P0000005 .jpg
Folder B
P0000006 .jpg
P0000007 .jpg
P0000008 .jpg
P0000009 .jpg
Folder C
P0000010 .jpg
P0000011 .jpg
P0000012 .jpg
in BD-RE * 6 /DVD-RAM * 4
≥ Folder structure is not displayed.
Root e.g.,
P0000001 .jpg
P0000002 .jpg
JPEG
DCIM
*1
XXXXX
*2
XXXX .jpg
*3
DCIM
XXXXX
*2
XXXX .jpg
*3 in SD card * 4 /USB device * 4
Displays JPEG files in all folders.
≥ Folder structure is not displayed.
Root e.g.,
P0000001 .jpg
P0000002 .jpg
DCIM
XXXXX
*2
XXXX .jpg
*3
Folder A
P0000003 .jpg
P0000004 .jpg
Structure of MP3 folders in DVD-R/DVD-R DL/CD-R/CD-RW/USB device
Prefix the file names with 3-digit numbers in the order you want to play them.
Root e.g.,
001 XXXX .mp3
002 XXXX .mp3
001
Folder A
003 XXXX .mp3
004 XXXX .mp3
005 XXXX .mp3
Folder B
006 XXXX .mp3
007 XXXX .mp3
008 XXXX .mp3
009 XXXX .mp3
Folder C
010 XXXX .mp3
011 XXXX .mp3
012 XXXX .mp3
Structure of DivX folders in BD-R * 7 /DVD-R * 7 /DVD-R DL * 7 /CD-R * 7 /CD-RW * 7 /USB device * 7
Files inside a folder are displayed in the order they were updated or taken.
Root e.g.,
P0000001 .divx
P0000002 .divx
Folder A
P0000003 .divx
P0000004 .divx
P0000005 .divx
Folder B
P0000006 .divx
P0000007 .divx
P0000008 .divx
P0000009 .divx
Folder C
P0000010 .divx
P0000011 .divx
P0000012 .divx
*4
*5
*6
*7
The total combined maximum number of recognizable picture contents and folders: 3000 picture contents and 300 folders.
The total combined maximum number of recognizable picture contents and folders: 999 picture contents and 99 folders.
The total combined maximum number of recognizable picture contents and folders: 9999 picture contents and 300 folders.
The total combined maximum number of recognizable file contents and folders: 200 file contents and 300 folders.
41
VQT2J87 (ENG)
DMP-BDT300_VQT2J87_eng.book 42 ページ 2010年1月18日 月曜日 午後5時27分
Supplemental information
∫ TV/Amplifier/Receiver code list
Brand TV Code
Panasonic
FUNAI
HITACHI
INSIGNIA
JVC
LG
MITSUBISHI
PHILIPS
PIONEER
POLAROID
0051 / 0055 / 0250 / 0650
0180 / 0171 / 0179
0016 / 0032 / 0038 / 0056 / 0095 / 0097 / 0145 / 0151 / 0173 / 0227 / 0279 / 0409 / 0413 /
1145
1564 / 0171 / 1204 / 1326 / 1517 / 1660 / 2002 / 2003/ 2004
0036 / 0053 / 0069 / 0160 / 0169 / 0182 / 0731 / 1253
0019 / 0030 / 0032 / 0106 / 0178 / 0317 / 0409 / 0442 / 0457 / 0700 / 0856 / 1178 / 1265
0014 / 0019 / 0093 / 0098 / 0150 / 0155 / 0178 / 0331 / 0358 / 0836 / 0868 / 1250
0054 / 0690 / 1154 / 1454
0038 / 0166 / 0172 / 0679 / 0866
0765 / 0865 / 1262 / 1276 / 1314 / 1316 / 1326 / 1327 / 1328 / 1341 / 1498 / 1523 / 2002
SAMSUNG
SANYO
SHARP
SONY
0019 / 0030 / 0032 / 0056 / 0060 / 0178 / 0329 / 0408 / 0427 / 0587 / 0702 / 0766 / 0812 /
0814 / 1060
0088 / 0107 / 0146 / 0154 / 0159 / 0232 / 0484 / 0799 / 0893
0039 / 0093 / 0153 / 0157 / 0165 / 0220 / 0281 / 0386 / 0398 / 0491 / 0688 / 0818 / 0851
0000 / 0011 / 0080 / 0111 / 0273 / 0353 / 0810 / 0834 / 0867 /1100
TOSHIBA
0036 / 0060 / 0149 / 0154 / 0156 / 0650 / 0832 / 0845 / 1156 / 1164 / 1256 / 1265 / 1356 /
VIZIO
1656 / 1704
1758 / 0864 / 0885 / 1756
WESTINGHOUSE 0885 / 0889 / 0890 / 1282 / 1577
Brand
Amplifier
Code
Receiver Code
Panasonic
COBY
DENON
EMERSON
HARMAN / KARDON
0308 1308 / 0039 / 0367 / 1641 / 2001 / 2002
1513 / 2003
1360 / 0004 / 0273 / 1142 / 1311
1340 / 2005
0110 / 0189 / 1306
INSIGNIA
JVC
LG
MARANTZ
ONKYO
1030 / 1077 / 1751 / 2004
0074 / 1374 / 1495 / 1855 / 1871
1293 / 2006
1189 / 1269 / 0039 / 0189 / 1289
0135 / 0380 / 1298 / 1320
1189 / 1269 / 0189 / 0391 / 1120 / 1266 / 1368 PHILIPS
PIONEER 0823
RCA
SAMSUNG
SONY
YAMAHA
0823
1023 / 0150 / 0244 / 0531 / 0630 / 1343 / 1384
1023 / 1609 / 1254 / 0054 / 0530 / 0531 / 1074 / 1390 / 1511
1295
0815 / 1126 1622 / 0158 / 0168 / 0474 / 1367 / 1529 / 1658 / 1758
0354 0176 / 0186 / 1331
∫ Video attribute
Display
MPEG-2/MPEG-4 AVC/VC-1
480/576/720/1080
24p/50i/60i/50p/60p
YCbCr4:2:2/YCbCr4:4:4/RGB bps (bit per second)
V.OFF
Meaning
Video recording method
Video Format
Video Frame rate
Color Space
Transfer rate of bit
No video from HDMI(SUB) terminal
Meaning
∫ Display languages list
Display Language Display Language Display Language
ENG
FRA
DEU
ITA
ESP
NLD
SVE
NOR
DAN
POR
RUS
English
French
German
Italian
Spanish
Dutch
Swedish
Norwegian
Danish
Portuguese
Russian
JPN
CHI
KOR
MAL
VIE
THA
POL
CES
SLK
HUN
FIN
Japanese
Chinese
Korean
Malay
Vietnamese
Thai
Polish
Czech
Slovak
Hungarian
Finnish
ARA
HIN
PER
IND
MRI
BUL
RUM
GRE
TUR
Arabic
Hindi
Persian
Indonesian
Maori
Bulgarian
Romanian
Greek
Turkish
Others
∫ Language code list
Language Code Language Code Language Code
Abkhazian 6566
Afar: 6565
Afrikaans:
Albanian:
Amharic:
6570
8381
6577
Arabic:
Armenian:
Assamese:
Aymara:
Azerbaijani:
Bashkir:
6582
7289
6583
6589
6590
6665
Basque:
Bengali; Bangla:
6985
6678
Bhutani:
Bihari:
Breton:
Bulgarian:
Burmese:
6890
6672
6682
6671
7789
Byelorussian: 6669
Cambodian: 7577
Catalan: 6765
Chinese:
Corsican:
Croatian:
9072
6779
7282
Czech:
Danish:
Dutch:
English:
Esperanto:
Estonian:
Faroese:
Fiji:
Finnish:
French:
Frisian:
Galician:
Georgian:
German:
Greek:
Greenlandic:
Guarani:
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
Gujarati:
Hausa:
Hebrew:
Hindi:
Hungarian:
Icelandic:
Indonesian:
Interlingua:
Irish:
Italian:
Japanese:
Javanese:
Kannada:
Kashmiri:
Kazakh:
Kirghiz:
Korean:
7487
7578
7583
7575
7589
7579
Kurdish:
Laotian:
Latin:
7585
7679
7665
Latvian, Lettish: 7686
Lingala: 7678
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
Lithuanian:
Macedonian:
Malagasy:
Malay:
Malayalam:
Maltese:
Maori:
Marathi:
Moldavian:
Mongolian:
Nauru:
Nepali:
Norwegian:
Oriya:
7879
7982
Pashto, Pushto: 8083
Persian:
Polish:
Portuguese:
Punjabi:
Quechua:
7065
8076
8084
8065
8185
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
Telugu:
Thai:
Tibetan:
Tigrinya:
Tonga:
Turkish:
Turkmen:
Twi:
Ukrainian:
Urdu:
Uzbek:
Vietnamese:
Volapük:
Welsh:
Wolof:
Xhosa:
Yiddish:
Yoruba:
Zulu:
Rhaeto-Romance:
8277
Romanian:
Russian:
Samoan:
8279
8285
8377
Sanskrit: 8365
Scots Gaelic: 7168
Serbian: 8382
Serbo-Croatian: 8372
Shona: 8378
Sindhi: 8368
Singhalese:
Slovak:
Slovenian:
Somali:
Spanish:
Sundanese:
Swahili:
Swedish:
Tagalog:
Tajik:
Tamil:
Tatar:
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
∫ Audio attribute
Display
LPCM/ Digital/ Digital+/
TrueHD/DTS/DTS-ES Mtrx/
DTS-ES Dscrt/DTS 96/DTS 96 ES Mtrx/
DTS-HD HI RES/DTS-HD MSTR/MPEG ch (channel) k (kHz) b (bit) bps (bit per second)
Signal type
Number of channels
Sampling frequency
Number of bits
Transfer rate of bit
42
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 43 ページ 2010年1月26日 火曜日 午後1時52分
Specifications
Signal system:
Operating temperature range:
NTSC i 5 o C to i 35 o C ( i 41 o F to i 95 o F)
Operating humidity range:
10 % to 80 % RH (no condensation)
Video output: 1.0 Vp-p (75 ≠ )/Pin jack:1 system
Component video output (Y:green, P
B
:blue, P
R
:red):
Y:1.0 Vp-p (75 ≠ )/P
B
, P
R
:0.7 Vp-p (75 ≠ )/Pin jack:1 system
Audio output: 2 Vrms (1 kHz, 0 dB)/Pin jack
Number of connectors :
7.1 channel discrete output:1 system
(2 channel + 5.1 channel discrete output)
Digital audio output:
HDMI AV output:
Optical digital output : Optical terminal
Coaxial digital output : Pin jack
Type A (19 pin) : 2 system(Main/Sub)
HDMI (3D, Content Type)
This unit supports “HDAVI Control 5” function.
SD card slot:
USB slot:
Ethernet:
LASER Specification
Connector : 1 system
USB2.0 : 2 systems
10BASE-T/100BASE-TX : 1 system
Class
I
LASER Product:
Wave length:790 nm (CDs)/650 nm (DVDs)/405 nm (BDs)
Laser power: No hazardous radiation is emitted with the safety protection
Power supply:
Power consumption:
AC 120 V, 60 Hz
Approx. 31 W
Power consumption in standby mode: Approx. 0.1 W
Power consumption in quick start standby mode:
Approx. 7.7 W
Dimensions (W k D k H) Including the projecting parts:
Mass (Weight):
430 mm k 245 mm k 66 mm
(Approx. 16 15/16 zk 9 11/16 zk 2 5/8 z )
Approx. 2.6 k g (5.7 lbs)
Wireless LAN Adaptor (DY-WL10)
Dimensions (W k D k H):
Mass (Weight):
Antenna:
Interface:
Standard Compliance:
44 mm k 72 mm k 27 mm
(1 3/4 zk 2 7/8 zk 1 1/8 z )
Approx. 29 g (1.02 oz)
Tx 1, Rx 2
USB2.0
IEEE802.11n / IEEE802.11a / IEEE802.11g / IEEE802.11b
Transmission system:
MISO-OFDM system, OFDM system, DSSS system
Frequency Range:
IEEE802.11n / IEEE802.11a:
5.15 GHz - 5.35 GHz/5.47 GHz - 5.825 GHz
IEEE802.11g / IEEE802.11b / IEEE802.11n:
2.4 GHz - 2.4835 GHz
Transfer rate (standard)*:
IEEE802.11n: Tx Max. 150 Mbps, Rx Max. 300 Mbps
IEEE802.11g / IEEE802.11a:
11 Mbps
Max. 54 Mbps
IEEE802.11b: Max.
Access Mode:
Security:
Infrastructure mode
WPA2-PSK (TKIP/AES)
WPA-PSK (TKIP/AES)
WEP (64 bit / 128 bit)
(This unit supports WPA and WPA2 encryption.)
* Transfer rates are theoretical values; however, actual communication rate will vary according to communication environment or connected equipment.
Specifications are subject to change without notice.
43
VQT2J87 (ENG)
VQT2J87~Body_eng.fm 44 ページ 2010年1月22日 金曜日 午後3時20分
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems,
Inc. in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending.
DTS and the Symbol are registered trademarks, & DTS-HD,
DTS-HD Master Audio | Essential and the DTS logos are trademarks of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
HDMI, the HDMI Logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard
(“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com.
HDAVI Control TM is a trademark of Panasonic Corporation.
x.v.Color
TM is a trademark.
VIERA Link TM is a trademark of Panasonic Corporation.
VIERA CAST TM is a trademark of Panasonic Corporation.
EZ Sync TM is a trademark of Panasonic Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
SDXC Logo is a trademark of SD-3C, LLC.
DivX ® is a registered trademark of DivX, Inc., and is used under license.
“Blu-ray Disc” is a trademark.
“BD-LIVE” logo is a trademark of Blu-ray Disc Association.
“BONUSVIEW” is a trademark of Blu-ray Disc Association.
YouTube and Picasa are trademarks of Google,Inc.
The Wi-Fi CERTIFIED Logo is a certification mark of the
Wi-Fi Alliance.
DLNA ® , the DLNA Logo and DLNA CERTIFIED TM are trademarks, service marks, or certification marks of the
Digital Living Network Alliance.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
44
VQT2J87(ENG)
“Blu-ray 3D” and “Blu-ray 3D” logo are trademarks of Blu-ray
Disc Assosiation.
This product incorporates the following software:
(1) the software developed independently by or for
Panasonic Corporation,
(2) the software owned by third party and licensed to
Panasonic Corporation,
(3) the software licensed under the GNU General Public
License, Version 2 (GPL v2),
(4) the software licensed under the GNU LESSER General
Public License, Version 2.1 (LGPL v2.1) and/or,
(5) open sourced software other than the software licensed under the GPL v2 and/or LGPL v2.1
For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those individuals at http://www.am-linux.jp/dl/JPRCBW98
The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE.
At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL v2.1.
Contact Information [email protected]
Source code is also freely available to you and any other member of the public via our website below.
http://www.am-linux.jp/dl/JPRCBW98
DMP-BDT300_VQT2J87_eng.book 45 ページ 2010年1月21日 木曜日 午後8時9分
Glossary
AVCHD
AVCHD is a new format (standard) for high-definition video cameras that can be used to record and play high-resolution
HD images.
BD-J
Some BD-Video discs contain Java applications, and these applications are called BD-J. You can enjoy various interactive features in addition to playing normal video.
Deep Color
Deep Color is a name for the device that can reproduce greater color gradation (4096 steps) when connected to a TV that supports the Deep Color with an HDMI cable. You can enjoy exceptionally rich, natural-looking colors, with smooth, detailed gradation and minimal color banding. [A lower color gradation (256 steps), without Deep Color, will be reproduced if connected to a TV which does not support Deep Color. The unit will automatically set appropriate output to suit the connected TV.]
DLNA (Digital Living Network Alliance) [BDT350]
DLNA is a standard that makes DLNA Certified digital electronics easier and more convenient to use on a home network.
Dolby Digital
This is a method of coding digital signals developed by Dolby
Laboratories. Apart from stereo (2-channel) audio, these signals can also be multi-channel audio.
Dolby Digital Plus
Multi-channel audio and higher audio quality is made possible using Dolby Digital Plus. BD-Video supports up to 7.1 channel output.
Dolby TrueHD
Dolby TrueHD is a very high quality audio format that reproduces the studio master audio. BD-Video supports up to
7.1 channel output.
DTS (Digital Theater Systems)
This surround system is used in many movie theaters. There is good separation between the channels, so realistic sound effects are possible.
DTS-HD
DTS-HD is a high-quality, sophisticated audio format used in movie theaters. Previous DTS Digital Surround-compatible equipment can play DTS-HD as DTS Digital Surround audio.
BD-Video supports up to 7.1 channel output.
DTS-HD High Resolution Audio
This is a signal format achieved by improving the previous
DTS, DTS-ES and DTS96/24 formats. It is compatible with sampling frequency 96 kHz/48 kHz. BD-Video supports up to
7.1 channel output.
DTS-HD Master Audio
This is a lossless audio format and compatible with 96 kHz/
7.1ch or less. In addition, faithful reproduction of the master audio is enabled using lossless audio encoding technology.
BD-Video supports up to 7.1 channel output.
HDMI (High-Definition Multimedia Interface)
HDMI is a digital interface for consumer electronic products.
Unlike conventional connections, it transmits uncompressed digital video and audio signals on a single cable.
Local storage
This storage area is used as a destination for sub contents for playing BD-Live on BD-Video.
LPCM (Linear PCM)
These are a kind of PCM format.
These are uncompressed digital signals, similar to those found on CDs.
P4HD (Pixel Precision Progressive Processing for HD)
This is a processor which makes use of an exclusive
Panasonic algorithm. Various processing is supported, including a high-level conversion of the TV scanning format from interlace to progressive and a high-level conversion of standard resolution (480i or 576i) video signal to a 1080
High-Definition video signal.
Consequently, this unit is able to provide video of optimal resolution to the connected TV.
PCM (Pulse Code Modulation)
This is one format for converting analog audio into digital audio, enabling you to enjoy digital audio with no hassle.
x.v.Color
TM x.v.Color
TM is a name for devices that are compatible with the xvYCC format, an international standard for expanded color in motion pictures, and that follow the rules for signal transmission.
You can enjoy vivid colors of wider color ranges for a more realistic picture when connected to a TV that supports the x.v.Color
TM with HDMI cable.
24p
This is a progressive image recorded at a rate of 24 frames per second (motion-picture film). Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials.
45
VQT2J87 (ENG)
DMP-BDT300_VQT2J87_eng.book 46 ページ 2010年1月18日 月曜日 午後5時27分
Limited Warranty (ONLY FOR U.S.A. AND PUERTO RICO)
Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Blu-ray and DVD Products
Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Electronics Company (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either
(a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price.
The decision to repair, replace or refund will be made by the warrantor.
Product or Part Name Parts Labor
Blu-ray Disc Player, Portable
Blu-ray Disc Player
Blu-ray Home Theater System
1 year 90 days
1 year 1 year
DVD Player, Portable DVD Player 1 year 90 days
DVD Recorder
Rechargeable Batteries (pack),
DVD-RAM Disc (defective exchange)
1 year 90 days
10 days
Not
Applicable
Wireless LAN adaptor 90 days
Not
Applicable
During the “Labor” warranty period there will be no charge for labor. During the
“Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”.
Mail-In Service
For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product prepaid to:
Panasonic Exchange Center
4900 George McVay Drive
Suite B
McAllen, TX 78503 [email protected]
When shipping the unit, carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. If Lithium Ion batteries are shipped by air the package must be labeled “Contains Lithium Ion
Battery (No lithium metal)”. Damaged batteries are prohibited from shipment by
US Mail. Batteries must be securely packed in a manner to prevent short-circuiting and a package cannot contain more than 3 Lithium Ion batteries. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE
PURCHASER WILL BE REQUIRED TO FURNISH A SALES
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED
UNDER “LIMITED WARRANTY COVERAGE”.
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF
THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE
PERIOD OF THE LIMITED WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s Consumer Affairs Department at the addresses listed for the warrantor.
PARTS AND SERVICE, WHICH ARE NOT COVERED BY
THIS LIMITED WARRANTY, ARE YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and
Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.com/contactinfo
You may also contact us directly at:
1-800-211-PANA (7262)
Monday-Friday 9am-9pm, Saturday-Sunday 10am-7pm EST
For hearing or speech impaired TTY users, TTY: 1-877-833-8855
Accessory Purchases (United States and Puerto Rico)
Purchase Parts, Accessories and Instruction Books online for all
Panasonic Products by visiting our Web Site at: http://www.pstc.panasonic.com
Or, send your request by E-mail to: [email protected]
You may also contact us directly at:
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)
(Monday-Friday 9am-9pm EST)
Panasonic Service and Technology Company
20421 84th Avenue South, Kent, WA 98032
(We accept Visa, MasterCard, Discover Card, American Express, and Personal Checks)
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
As of November 2009
The model number and serial number of this product can be found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for future reference.
MODEL NUMBER
SERIAL NUMBER
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
46
VQT2J87(ENG)
DMP-BDT300_VQT2J87_eng.book 47 ページ 2010年1月18日 月曜日 午後5時27分
Limited Warranty (Only for CANADA)
Panasonic Canada Inc.
PANASONIC PRODUCT—LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
Technics Audio Product
Panasonic Portable/Clock Radio (without Tape, CD, MD)
Panasonic Audio/SD Audio Product
Panasonic BD/DVD Product
Panasonic Combination DVD Player/VCR
Panasonic Combination DVD Recorder/VCR
Accessories including rechargeable batteries
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
One (1) year, parts and labour
Ninety (90) days
LIMITATIONS AND EXCLUSIONS
This warranty does not apply to products purchased outside Canada or to any product which has been improperly installed, subjected to usage for which the product was not designed, misused or abused, damaged during shipping, or which has been altered or repaired in any way that affects the reliability or detracts from the performance, nor does it cover any product which is used commercially. Dry cell batteries are also excluded from coverage under this warranty.
This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required before warranty service is performed.
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES.
In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable.
WARRANTY SERVICE
FOR PRODUCT OPERATION ASSISTANCE, please contact:
Our Customer Care Centre: Telephone #:
1-800 #:
Fax #:
Email link:
(905) 624-5505
1-800-561-5505
(905) 238-2360
“Customer support” on www.panasonic.ca
FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca :
Link : “Servicentres TM locator” under “Customer support”
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the original carton.
Include details of the defect claimed, and proof of date of original purchase.
47
VQT2J87 (ENG)
DMP-BDT300_VQT2J87_eng.book 48 ページ 2010年1月26日 火曜日 午後1時52分
Referencia rápida en español
(Spanish Quick Reference)
Conexiones básicas
Conexión a un televisor compatible con HDMI
Cable HDMI
HDMI IN
Conexión a un televisor con un cable para audio/vídeo
Cable de audio/ vídeo (incluido)
R L
AUDIO IN VIDEO IN
Conexión a un televisor compatible con HDMI y a un amplificador/ receptor compatible con HDMI
HDMI IN
Cable HDMI
Altavoces multicanal
Amplificador/Receptor
HDMI IN
Cable HDMI
HDMI OUT
Conecte el cable de alimentación de CA por último
A una toma de corriente doméstica
Cable de alimentación de CA (incluido)
AC IN
≥ Conéctelo cuando haya realizado el resto de conexiones.
Ahorro de energía
Esta unidad consume una pequeña cantidad de energía aunque esté ajustada en el modo de espera (Accionamiento rápido : Desactivado, aprox. 0,1 W). Para ahorrar energía cuando no vaya a utilizar la unidad durante mucho tiempo, desenchúfela de la toma de corriente.
48
VQT2J87(ENG)
Reproducción básica
Preparación
Encienda el televisor y seleccione la entrada de vídeo adecuada en el televisor.
1
Pulse [
Í
POWER] para encender la unidad.
Después de conectar su nuevo reprodutor y pulsar el botón de encendido, aparecerá la pantalla de la configuración básica.
2
Inserte el medio.
Inicia la reproducción
Pulse [ 1 ] (PLAY).
Parada
Pulse [ ∫ ].
La posición de detención se memoriza.
Función de reanudación de la reproducción
Pulse [ 1 ] (PLAY) para reiniciar la reproducción desde esta posición.
≥ La posición se borra si se abre la bandeja o se pulsa [ ∫ ] varias veces para visualizar “STOP” en el visor de la unidad.
≥ En los discos BD-Video incluidos los BD-J, la función de reanudación de la reproducción no funciona.
Pausa
Pulse [ ; ].
≥ Pulse [ ; ] otra vez o [ 1 ] (PLAY) para reiniciar la reproducción.
Búsqueda/Cámara lenta
Búsqueda
Durante la reproducción, pulse [ 6 ] o [ 5 ].
≥ Música y MP3: La velocidad está fija en un paso.
Cámara lenta
Durante la pausa, pulse [ 6 ] o [ 5 ].
≥ BD-Video y AVCHD : Sólo dirección en avance [ 5 ].
La velocidad aumenta hasta 5 pasos.
≥ Pulse [ 1 ] (PLAY) para recuperar la velocidad de reproducción normal.
Salto
Durante la reproducción o la pausa, pulse [ : ] o [ 9 ].
Salta hasta el título, capítulo o pista que desee reproducir.
≥ Cada pulsación aumenta el número de saltos.
DMP-BDT300_VQT2J87_eng.book 48 ページ 2010年1月26日 火曜日 午後1時52分
Index
A AC Power Connection . . . . . . . . 14
Angle . . . . . . . . . . . . . . . . . . . . . . 28
Audio
Changing audio . . . . . . . . . . . . 19
Channel . . . . . . . . . . . . . . . . . . 28
Language . . . . . . . . . . . . . . 28, 30
AVCHD. . . . . . . . . . . . . . . . . . . . . 40
B BD-Live . . . . . . . . . . . . . . . . . . . . 21
BD-Video Ratings . . . . . . . . . . . . 30
BONUSVIEW . . . . . . . . . . . . . . . . 21
C Chapter . . . . . . . . . . . . . . . . . . . . 20
Cleaning . . . . . . . . . . . . . . . . . . . . 4
Connection . . . . . . . . . . . . 8–12, 14
D Deep Color . . . . . . . . . . . . . . . . . 45
Direct Navigator . . . . . . . . . . . . . 19
DivX . . . . . . . . . . . . . . . . . . . . 22, 40
DLNA . . . . . . . . . . . . . . . . . . . . . . 26
DNS Server . . . . . . . . . . . . . . . . . 33
Dolby Digital . . . . . . . . . . . . . 31, 38
Dolby Digital Plus. . . . . . . . . 31, 38
Dolby TrueHD . . . . . . . . . . . . 31, 38
DTS . . . . . . . . . . . . . . . . . . . . 31, 38
DTS-HD . . . . . . . . . . . . . . . . . 31, 38
DVD-Video Ratings. . . . . . . . . . . 30
F Finalize . . . . . . . . . . . . . . . . . . . . . 7
Firmware update. . . . . . . . . . . . . 17
Frame-by-frame . . . . . . . . . . . . . 19
H HDMI . . . . . . . . . . . . . . . . . . . . 8, 10
I IP address. . . . . . . . . . . . . . . . . . 33
J JPEG . . . . . . . . . . . . . . . . . . . 24, 40
L LAN . . . . . . . . . . . . . . . . . . . . . . . 12
Language
Audio . . . . . . . . . . . . . . . . . 28, 30
Menu . . . . . . . . . . . . . . . . . . . . 30
On-screen . . . . . . . . . . . . . . . . 31
Soundtrack. . . . . . . . . . . . . . . . 28
Subtitle . . . . . . . . . . . . . . . . 28, 30
Local storage . . . . . . . . . . . . . . . 45
M MPEG2 . . . . . . . . . . . . . . . . . . . . 40
MP3 . . . . . . . . . . . . . . . . . . . . 25, 40
N Network
Connection. . . . . . . . . . . . . . . . 12
Setting . . . . . . . . . . . . . . . . 15, 33
O Off Timer. . . . . . . . . . . . . . . . . . . 33
On-screen Language . . . . . . . . . 31
P Picture-in-picture . . . . . . . . . . . . 21
Playback
AVCHD . . . . . . . . . . . . . . . . . . 19
DivX . . . . . . . . . . . . . . . . . . . . . 19
JPEG . . . . . . . . . . . . . . . . . . . . 24
MPEG2 . . . . . . . . . . . . . . . . . . 19
MP3 . . . . . . . . . . . . . . . . . . . . . 25
Playlists . . . . . . . . . . . . . . . . . . . 18
Pop-up menu . . . . . . . . . . . . . . . 19
Proxy Server. . . . . . . . . . . . . . . . 33
P4HD . . . . . . . . . . . . . . . . . . . . . . 45
Q Quick Start . . . . . . . . . . . . . . . . . 33
R Random play . . . . . . . . . . . . . . . 29
Re-master. . . . . . . . . . . . . . . . . . 29
Remote control . . . . . . . . . 4, 5, 17
Repeat play . . . . . . . . . . . . . . . . 29
Restore Default Settings. . . . . . 33
Resume play function . . . . . . . . 19
S SD card . . . . . . . . . . . . . . . . . . 7, 21
Setup menu . . . . . . . . . . . . . . . . 30
Slideshow. . . . . . . . . . . . . . . . . . 24
Slow-motion . . . . . . . . . . . . . . . . 19
Soundtrack. . . . . . . . . . . . . . . . . 28
Status Message . . . . . . . . . . . . . 19
Still picture . . . . . . . . . . . . . . . . . 24
Subtitle . . . . . . . . . . . . . . . . . . . . 28
U USB device. . . . . . . . . . . . . . . . . . 7
V VIERA CAST TM . . . . . . . . . . . . . . 25
VIERA Link TM
“HDAVI Control TM ” . . . . . . . . . . 27
W Wireless LAN . . . . . . . . . . . . . . . 12
X x.v.Color
TM . . . . . . . . . . . . . . . . . 45
24p . . . . . . . . . . . . . . . . . . . . 29, 32
3D . . . . . . . . . . . . . . . . . . . . . . . . 23
Information on Disposal in other Countries outside the
European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Panasonic Consumer Electronics
Company, Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094 http://www.panasonic.com
C Panasonic Corporation 2010
Printed in China
Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 www.panasonic.ca
(Inside of product) pr
VQT2J87
F0110SK0

Public link updated
The public link to your chat has been updated.
Advertisement