Panasonic DMP-BD87 User Guide Manual Operating Instruction Pdf


Add to my manuals
40 Pages

advertisement

Panasonic DMP-BD87 User Guide Manual Operating Instruction Pdf | Manualzz

DMP-BD87_77_VQT3V18_eng.book 1 ページ 2011年12月22日 木曜日 午後8時19分

Owner’s Manual

Blu-ray Disc

TM

Player

Model No. DMP-BD871

DMP-BD87

DMP-BD77

Unless otherwise indicated, illustrations in this Owner’s Manual are of DMP-BD871 for U.S.A.

Thank you for purchasing this product.

For optimum performance and safety, please read these instructions carefully.

Please keep this manual for future reference.

If you have any questions, contact:

U.S.A. and Puerto Rico : 1-800-211-PANA(7262)

Canada : 1-800-561-5505

P PC

until

2012/01/5

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 2 ページ 2011年12月22日 木曜日 午後8時19分

Getting started

IMPORTANT SAFETY

INSTRUCTIONS

Read these operating instructions carefully before using the unit.

Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference.

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11 Only use attachments/accessories specified by the manufacturer.

12 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or when unused for long periods of time.

14 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE SCREWS.

NO USER-SERVICEABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

2

VQT3V18

[BD871] [BD87]

THE FOLLOWING APPLIES IN THE U.S.A.

AND CANADA

This device complies with Part 15 of FCC Rules and

RSS-Gen of IC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

Contains FCC ID: ZVABDDMPBD87

Contains IC: 9976A-DMPBD87

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in

Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm (7 7 /

8 q ) or more away from person’s body (excluding extremities: hands, wrists, feet and ankles).

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

≥ Reorient or relocate the receiving antenna.

≥ Increase the separation between the equipment and receiver.

≥ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

≥ Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

Trade Name: Panasonic

Model No.: DMP-BD871

DMP-BD87

DMP-BD77

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Support Contact:

Panasonic Consumer Marketing Company of North America

Telephone No.: 1-800-211-PANA (7262)

THE FOLLOWING APPLIES ONLY IN CANADA.

This Class B digital apparatus complies with Canadian

ICES-003.

DMP-BD87_77_VQT3V18_eng.book 3 ページ 2011年12月22日 木曜日 午後8時19分

Table of contents

WARNING

Unit

To reduce the risk of fire, electric shock or product damage,

≥ Do not expose this unit to rain, moisture, dripping or splashing.

≥ Do not place objects filled with liquids, such as vases, on this unit.

≥ Use only the recommended accessories.

≥ Do not remove covers.

≥ Do not repair this unit by yourself. Refer servicing to qualified service personnel.

AC power supply cord

≥ Install this unit so that the power cord can be unplugged from the socket outlet immediately if any problem occurs.

Getting started

IMPORTANT SAFETY INSTRUCTIONS. . . . 2

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Unit and media care. . . . . . . . . . . . . . . . . . . . 4

Playable media . . . . . . . . . . . . . . . . . . . . . . . 5

Control reference guide . . . . . . . . . . . . . . . . . 7

Connections & Settings

CAUTION

Unit

≥ This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

≥ Do not place sources of naked flames, such as lighted candles, on this unit.

Placement

To reduce the risk of fire, electric shock or product damage,

≥ Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated.

≥ Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.

≥ Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit.

Batteries

Mishandling of batteries can cause electrolyte leakage, which can damage items the fluid contacts and may cause a fire.

≥ Danger of explosion if battery is incorrectly replaced. Replace only with the type recommended by the manufacturer.

≥ When disposing the batteries, please contact your local authorities or dealer and ask for the correct method of disposal.

≥ Do not mix old and new batteries or different types at the same time.

≥ Do not heat or expose to flame.

≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with doors and windows closed.

≥ Do not take apart or short circuit.

≥ Do not attempt to recharge alkaline or manganese batteries.

≥ Do not use batteries if the covering has been peeled off.

Remove batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

STEP 1 : Connecting to a TV. . . . . . . . . . . . . 8

STEP 2 : Connecting to an amplifier/receiver . . . . . . . . . . . . 8

STEP 3 : Connecting to the network . . . . . . . 9

STEP 4 : Connecting to an AC power source . . . . . . . . . . . 10

STEP 5 : Settings . . . . . . . . . . . . . . . . . . . . 11

Playback

Inserting or removing media . . . . . . . . . . . . 14

HOME menu . . . . . . . . . . . . . . . . . . . . . . . . 14

Multi User Mode. . . . . . . . . . . . . . . . . . . . . . 15

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Enjoying Network Service

(NETFLIX, etc.) . . . . . . . . . . . . . . . . . . . . . 18

Home Network feature . . . . . . . . . . . . . . . . . 19

“HDMI CEC”. . . . . . . . . . . . . . . . . . . . . . . . . 20

Settings

Option menu . . . . . . . . . . . . . . . . . . . . . . . . 21

Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . 23

Reference

Troubleshooting guide . . . . . . . . . . . . . . . . . 27

Messages . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Supplemental information . . . . . . . . . . . . . . 31

Precautions of Wireless LAN connection. . . 32

Specifications. . . . . . . . . . . . . . . . . . . . . . . . 32

Limited Warranty . . . . . . . . . . . . . . . . . . 37, 38

Referencia rápida en español

(Spanish Quick Reference) . . . . . . . . . . . . 39

Index . . . . . . . . . . . . . . . . . . . . . . . Back cover

Restriction on use of unauthorized copied content (

>

33)

About Firmware updates (

>

13)

(Inside of product)

VQT3V18

3

DMP-BD87_77_VQT3V18_eng.book 4 ページ 2011年12月22日 木曜日 午後8時19分

Accessories

Check the supplied accessories before using this unit.

1 Remote control

(N2QAYB000734)

2 Batteries for remote control

Unit and media care

Clean this unit with a soft, dry cloth

≥ Never use alcohol, paint thinner or benzine to clean this unit.

≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.

[For_Canada]

The enclosed Canadian French label sheet corresponds to the English display on the unit.

≥ Product numbers provided in this Owner’s Manual correct as of December 2011. These may be subject to change.

This unit’s lens

Use the lens cleaner (not supplied) to clean the unit’s lens.

Clean discs

DO DO NOT

Using the remote control

Insert so the poles ( i and j ) match those in the remote control.

R6/LR6, AA

(Alkaline or manganese batteries)

Point it at the remote control signal sensor on this unit. (

>

7)

Wipe with a damp cloth and then wipe dry.

Disc handling precautions

≥ Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.

≥ Do not attach labels or stickers to discs.

≥ Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.

≥ Do not use the following discs:

– Discs with exposed adhesive from removed stickers or labels (rented discs, etc).

– Discs that are badly warped or cracked.

– Irregularly shaped discs, such as heart shapes.

To dispose or transfer this unit

The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (

>

27, “To return all settings to the factory preset.”)

≥ The operation history may be recorded in the memory of this unit.

4

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 5 ページ 2011年12月22日 木曜日 午後8時19分

Playable media

Type Logo examples

BD

Type detail

BD-Video

BD-RE

BD-R

DVD-Video

Playable contents

Video

Video, JPEG

Video, MKV

Video

DVD-R

DVD

Video, AVCHD

MKV, JPEG, FLAC,

MP3, WAV

DVD-R DL

DVD-RW

Video, AVCHD

— +R/+RW/+R DL

Music CD Music [CD-DA]

CD

USB

CD-R

CD-RW

USB devices

(up to 2 TB)

MKV, JPEG,

FLAC, MP3,

Music [CD-DA], WAV

MP4, MPEG, MKV,

JPEG, FLAC,

MP3, WAV

≥ See pages 6 and 33 for more information on the types of content that can be played.

VQT3V18

5

DMP-BD87_77_VQT3V18_eng.book 6 ページ 2011年12月22日 木曜日 午後8時19分

Discs that cannot be played in this unit

Any other disc that is not specifically supported or previously described.

≥ DVD-RAM

≥ Super Audio CD

≥ Photo CD

≥ DVD-Audio

≥ Video CD and Super Video CD

≥ WMA discs

≥ All types of DivX discs

≥ PAL discs

≥ HD DVD

≥ BD-Video discs recorded at a rate of 50 fields/sec

Region management information

BD-Video

This unit can play BD-Video discs supporting the region code “A” .

Example:

Music CD

≥ Operation and sound quality of CDs that do not conform to CD-DA specifications (copy control

CDs, etc.) cannot be guaranteed.

≥ The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible.

USB device

≥ This unit does not guarantee connection with all

USB devices.

≥ This unit does not support USB device charging.

≥ FAT12, FAT16, FAT32 and NTFS file systems are supported.

≥ This unit supports USB2.0 High Speed.

≥ This unit supports an HDD formatted in FAT32 and NTFS. If the HDD is not recognized the power to the HDD may not be supplied. Supply power from an external source.

DVD-Video

This unit can play DVD-Video discs supporting the region number “1” or “ALL” .

Example:

1 ALL

1

2

4

Finalize

DVD-R/RW/R DL, +R/+RW/+R DL and CD-R/RW recorded by a recorder, etc. needs to be finalized by the recorder to play on this unit. Please refer to the recorder’s instructions.

BD-Video

≥ This unit supports high bit rate audio (Dolby

Digital Plus, Dolby TrueHD, DTS-HD High

Resolution Audio and DTS-HD Master Audio) adopted in BD-Video.

≥ If “Dolby D/Dolby D +/Dolby TrueHD” is set to

“PCM”, the maximum possible number of Dolby sound is 2ch PCM.

(

>

23)

≥ It may not be possible to play the above media in some cases due to the type of media, the condition of the recording, the recording method and how the files were created.

≥ The producers of the disc can control how discs are played, so you may not always be able to control play as described in this Owner’s Manual. Read the disc’s instructions carefully.

6

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 7 ページ 2011年12月22日 木曜日 午後8時19分

Control reference guide

11

3

4

5

6

7

8

9

10

1

2

16

17

18

19

20

12

13

14

15

1 Turn the unit on and off

2 TV operation buttons

You can operate the Panasonic TV through the unit’s remote control (Depending on the

TV these buttons may not work.).

[ Í TV] : Turn the television on and off

[AV] : Switch the input select

[ i j VOL] : Adjust the volume

3 Select title numbers, etc./Enter numbers

4 Cancel

5 Select audio (

>

16)

6 Basic playback control buttons ( > 16)

7 Show status messages (

>

17)

8 Show Pop-up menu/Top menu (

>

17)

9 Show Option menu ( > 21)

10 Colored buttons

Used for various purposes depending on the display.

11 Transmit the remote control signal

12 Open or close the disc tray (

>

14)

13 Show NETFLIX screen ( > 18)

14 Switch on/off Secondary Video

(Picture-in-picture) (

>

22)

15 Show Setup menu ( > 23)

16 Exit the menu screen

17 Show the selection screen of network features ( > 18)

18 Show HOME menu ( > 14)

19 [ 3 , 4 , 2 , 1 ] : Move the highlight for selection

[OK] : Confirm the selection

( ;1 ) : Frame-by-frame (

>

16)

20 Return to previous screen

1 8

2

1 Standby/on switch ( Í /I ) (

>

11)

Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power.

2 Disc tray (

>

14)

3 USB port ( > 14)

4 Display (

>

31)

3 4 5 6 7

5 Remote control signal sensor

Distance: Within approx. 7 m (23 feet)

Angle: Approx. 20 e up and down, 30 e left and right

6 Stop (

>

16)

7 Start play (

>

16)

8 Open or close the disc tray (

>

14)

Rear panel terminals (

>

8–10)

VQT3V18

7

DMP-BD87_77_VQT3V18_eng.book 8 ページ 2011年12月22日 木曜日 午後8時19分

STEP 1 : Connecting to a TV

Perform either one of the following connections in accordance with your TV input terminal.

≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC power.

≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly.

≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft.) or less.

Recommended part number (High Speed HDMI Cable):

RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.

HDMI AV OUT (High quality)

HDMI IN

HDMI cable

VIDEO OUT (Standard quality)

VIDEO IN

L

AUDIO IN

R

Audio/Video cable

≥ Connect terminals of the same color.

STEP 2 : Connecting to an amplifier/receiver

HDMI cable HDMI cable

HDMI IN

HDMI OUT

(ARC)

HDMI IN

(ARC)

Amplifier/receiver

≥ Set “Digital Audio Output” ( > 23).

≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”

(non-ARC-compatible) on the HDMI terminal, in order to enjoy TV’s sound by amplifier/receiver it is also required to connect the amplifier/receiver and TV using an optical digital cable.

8

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 9 ページ 2011年12月22日 木曜日 午後8時19分

STEP 3 : Connecting to the network

The following services can be used when this unit is connected to broadband.

≥ Firmware can be updated (

>

13)

≥ You can enjoy BD-Live (

>

17)

≥ You can enjoy Network Service ( > 18)

≥ You can access other devices (Home Network) (

>

19)

For details about connection method, refer to the instructions supplied with the connected equipment.

Wireless LAN connection

– [BD871] [BD87] : Wireless LAN is built in. (There is no need to connect a Wireless LAN Adaptor.)

– [BD77] : Connect the Wireless LAN Adaptor DY-WL5 (optional). Only DY-WL5 can be used.

Read the operating instructions for DY-WL5 thoroughly when using it.

[BD871] [BD87]

[BD77]

Wireless router, etc.

Internet

≥ For up-to-date compatibility information on your wireless router refer to http://panasonic.jp/support/global/cs/

(This site is in English only.)

For additional information about this unit refer to http://www.panasonic.com/consumer/support (For U.S.A.)

≥ The unit is not compatible with public wireless LAN services provided in airports, stations, cafes, etc.

≥ See page 32 for the precautions of wireless LAN connection.

LAN cable connection

LAN Cable

Broadband router, etc.

Internet

≥ Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.

≥ Inserting any cable other than a LAN cable in the LAN terminal can damage the unit.

VQT3V18

9

DMP-BD87_77_VQT3V18_eng.book 10 ページ 2011年12月22日 木曜日 午後8時19分

STEP 4 : Connecting to an AC power source

To a household AC outlet

≥ This unit consumes a small amount of AC power ( > 32) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.

10

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 11 ページ 2011年12月22日 木曜日 午後8時19分

STEP 5 : Settings

Easy Setting

Easy Network Setting

After connecting your new player for the first time and pressing [ Í ], a screen for the basic settings will appear.

After completing “Easy Setting”, you can perform

“Easy Network Setting”.

Wired connection

Select “Wired” and press [OK].

Preparation

Turn on the television and select the appropriate video input on the television.

Easy Network Setting

Select a connection mode.

Current setting Wired

1

Press [ Í ].

Setup screen appears.

2

Follow the on-screen instructions and apply the settings.

≥ You can perform this setup anytime by selecting “Easy

Setting” in the Setup menu. ( > 25)

Wired

Wireless

OK

RETURN

Follow the on-screen instructions to apply your connection settings.

Wireless connection

Preparation

≥ Obtain your network name ( > 12, SSID).

≥ If your wireless connection is encrypted, please be sure that you know your encryption key (password).

≥ [BD77] : If “Wireless LAN Adaptor is not connected.” is displayed, check that the Wireless LAN Adaptor is fully inserted. Alternatively, disconnect and reconnect it. If there is still no change in the display, consult your dealer for advice.

1

Select “Wireless” and press [OK].

2

Select “Search for wireless network” or

“WPS (PUSH button method)” and press

[OK], then follow the on-screen instructions and apply the settings.

Wireless Settings

Select a connection method.

Please refer to the operating instructions of your wireless access point about connection methods.

Search for wireless network

WPS (PUSH button method)

“WPS (PUSH button method)”

If you are using a wireless router that supports

WPS (Wi-Fi Protected Setup TM ), you can easily perform the settings.

VQT3V18

11

DMP-BD87_77_VQT3V18_eng.book 12 ページ 2011年12月22日 木曜日 午後8時19分

“Search for wireless network”

The available wireless networks will be displayed.

1 Select your network name and press [OK].

≥ If your network name is not displayed, search again by pressing the [R] button on the remote control. Stealth SSID will not be displayed, in this case enter manually.

Connection Settings

Select a wireless network for connection.

SSID

XXXXXXXXXX

XXXXXXXXXX

XXXXXXXXXX

XXXXXXXXXX

XXXXXXXXXX

XXXXXXXXXX

XXXXXXXXXX

Reception

To enter your network name (SSID) manually

If your network name (SSID) is not displayed in step 1 , follow these steps.

1 To display the network name (SSID) input screen :

While displaying the HOME menu, press

[SETTINGS] > select “Network” > [OK] > select “Network Settings”

>

[OK]

>

select

“Wireless Settings”

>

[OK]

>

select

“Connection Setting” > [OK] > select

“Manual setting”

>

[OK]

2 Press [OK] to select “SSID” and enter your

SSID.

Wireless Settings

Enter your network name (SSID) to connect.

OPTION

OK

RETURN

Search again

SSID

Set

When your wireless network is encrypted

2 Press [OK] to select “Encryption Key”.

Wireless Settings

Enter the encryption key (password) of the wireless network.

≥ If your wireless network is encrypted, go to step 2 .

Encryption Key

Set

3 Enter your encryption key (password).

Encryption Key (Password) l

Shift

OK

RETURN h o v

Space p w b i

/

Symbols

: q x c j r y

~ d k s z e l t f m

.

_ -

Alphanumeric

, g n u

@

7

*

1

4

2

5

8

0

; ‘ “

Other Characters

9

#

3

6

Delete

Finish

≥ Refer to the operating instructions of the hub or router.

≥ WPS (Wi-Fi Protected Setup) is a standard that facilitates settings relating to the connection and security of wireless

LAN devices. To see whether your wireless router supports

WPS, check the wireless router operating instructions.

≥ You can perform this setup anytime by selecting “Easy

Network Setting” in the Setup menu. ( > 24)

≥ You can redo these settings individually using “Network

Settings”. ( > 24)

≥ Do not use this unit to connect to any wireless network for which you do not have usage rights.

During automatic searches in a wireless network environment, wireless networks (SSID*) for which you do not have usage rights may be displayed; however, using these networks may be regarded as illegal access.

≥ After performing network settings on this unit, the settings

(encryption level, etc.) of the wireless router might change.

When you have trouble getting online on your PC, perform the network settings on your PC in accordance with the settings of wireless router.

≥ Please be aware that connecting to a network without encryption may result in the content of the communication being illegitimately viewed by a third party, or the leaking of data such as personal or secret information.

* SSID:

An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network.

Transmission is possible if the SSID matches for both devices.

12

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 13 ページ 2011年12月22日 木曜日 午後8時19分

Reprogramming the remote control

If you have more than one Panasonic player/ recorder and the remote control operates both products at once, you will need to change the remote control code to prevent this occurrence.

(

>

26, “Remote Control Code”)

Firmware updates

Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.

This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.

When a new firmware version is available, the following message is displayed.

New firmware is available.

Please update firmware in Setup.

To update the firmware

Press [HOME]

>

press [SETTINGS]

>

select

“System”

>

[OK]

>

select “Firmware Update”

>

[OK]

>

select “Update Now”

>

[OK]

DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.

After the firmware is installed, “FIn” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.

The firmware was updated.

Current Version : x.xx

OK

RETURN

≥ If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

To show the firmware version on this unit.

( > 26, “Firmware Version Information”)

≥ Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.

≥ If you do not want to check for the latest firmware version, set “Automatic Update Check” to “Off”. ( > 26)

VQT3V18

13

DMP-BD87_77_VQT3V18_eng.book 14 ページ 2011年12月22日 木曜日 午後8時19分

Inserting or removing media

HOME menu

Major functions of this unit can be operated from the HOME menu.

Preparation

Turn on the television and select the appropriate video input on the television.

1

Press [ Í ] to turn on the unit.

2

Press [OK] or [ 3 , 4 , 2 , 1 ] to select the item.

≥ If there are any other items, repeat this step.

≥ When inserting a media item, ensure that it is facing the right way up.

≥ If you connect a Panasonic product with a USB connection cable, the setup screen may be displayed on the connected equipment. For details, refer to the instructions for the connected equipment.

≥ [BD77] : Use the front USB port when you connect a USB memory or a USB HDD. The

USB port on the rear panel is only for the

Wireless LAN Adaptor DY-WL5 (optional).

CAUTION

Do not place objects in front of the unit. The disc tray may collide with objects when it is opened, and this may cause malfunction.

HOME

Blu-ray Disc Player

Photos

Network

Setup Music

Videos

Personalize

1st user

Videos/Photos/Music

Disc

USB

Play back the contents. (

>

16)

≥ When multiple contents are recorded, select the types of contents or the title.

Network

Network

Service

Home

Network

Displays the Home screen of

Network Service. (

>

18)

DLNA Client ( > 19)

Media Renderer ( > 19)

Setup

Player

Settings

USB

Management

( > 23)

( > 17)

Wallpaper

Changes the background of

HOME menu.

To show the HOME menu

Press [HOME].

≥ Items to be displayed may vary with the media.

≥ Where necessary, set “Mixed Data Disc Option” when using a disc with both data files (MP3, JPEG, MKV, etc.) and Video (BDAV and AVCHD). ( > 26)

14

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 15 ページ 2011年12月22日 木曜日 午後8時19分

Multi User Mode

Multi User Mode is a function that enables switching of multiple settings easily.

Up to 4 people can use the unit with their own settings.

The following settings can be personalized.

≥ The user icon

≥ The wallpaper of Home menu

≥ The picture settings ( > 21, 23)

A

HOME

User 1

Blu-ray Disc Player

Network

Photos Setup Music

Videos

B

User 1 Personalize

2nd user

A The user name and icon currently selected

B Personalize a new user and switch the users with colored buttons.

Personalizing a new user

1

Press [HOME].

2

Press a colored button that indicates new user personalization.

3

Select an item and change the settings according to the indications.

The following items can be set.

Input

Nickname

Personalize a user name.

Personalize a user icon.

Select Icon

Select from illustrations

The image can be selected from prepared illustrations.

Select

Wallpaper

Create from Photos

You can select a photo in recording media as an icon.

(

>

21, “Icon Personalization”)

Personalize a background of the

Home menu.

≥ Other than prepared wallpapers, you can also select a photo in recording media as a wallpaper.

( > 21, “Wallpaper”)

4

Select “Confirm” and press [OK].

To change the personalized user information

Select “Edit User Information” from Setup menu.

( > 26)

Switching the user

Press the colored buttons in the Home menu to switch to the user corresponding to the button.

VQT3V18

15

DMP-BD87_77_VQT3V18_eng.book 16 ページ 2011年12月22日 木曜日 午後8時19分

Playback

1

Insert the media.

Playback starts depending on the media.

2

Select the item to play and press [OK].

Repeat this procedure if necessary.

≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE

DISPLAYED. Press [ ∫ STOP] when you have finished playback to protect the unit’s motor, your television screen and so on.

≥ MKV: Successive play is not possible.

≥ It is not possible to play back AVCHD and MPEG2 video which have been dragged and dropped, copied and pasted to the media.

≥ To save on electricity, the power is turned off automatically if there is no button operation for about 30 minutes when not playing back (such as when paused, displaying the menu, displaying still pictures, etc.). (Compatible with

ENERGY STAR)

Operations during playback

Following functions may not work depending on the media and contents.

Stop

Press [ ∫ STOP].

The stopped position is memorized.

Resume play function

Press [ 1 PLAY] to restart from this position.

≥ The position is cleared if the tray is opened or you press [ ∫ STOP] several times to display

“StOP” on the unit’s display.

≥ On BD-Video discs including BD-J, the resume play function does not work.

Pause

Press [ ; PAUSE].

≥ Press [ ; PAUSE] again or [ 1 PLAY] to restart play.

Search/Slow-motion

Search

While playing, press [SEARCH 6 ] or

[SEARCH 5 ].

≥ Music and MP3: The speed is fixed to a single step.

Slow-motion

While paused, press [SEARCH 5 ].

The speed increases up to 5 steps.

≥ Press [ 1 PLAY] to revert to normal playback speed.

Skip

While playing or paused, press [ : ] or [ 9 ].

Skip to the title, chapter or track.

Frame-by-frame

While paused, press [ 1 ] ( ;1 ).

≥ Press and hold to change in succession forward.

≥ Press [ 1 PLAY] to revert to normal playback speed.

Changing audio

Press [AUDIO].

You can change the audio channel number or soundtrack language, etc.

16

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 17 ページ 2011年12月22日 木曜日 午後8時19分

Displaying menus and playback information

Show top menu/pop-up menu

Press [POP-UP MENU/TOP MENU].

≥ Select the item and press [OK].

Show the status messages

While playing, press [STATUS].

The status messages give you information about what is currently being played. Each time you press [STATUS], the display information may change or will disappear from the screen.

≥ Depending on media and contents, the display may change or may not appear.

e.g., BD-Video

A B

T1 C1 0:05.14

0:20.52

C D

A T: Title, C: Chapter, PL: Playlist

B Elapsed time in the title

C Current position

D Total time e.g., JPEG

Date 11/12/2007

Size 500 x 375

Manufacturer

Equipment

1 / 26

BD (Video)

Play

Enjoying BD-Live

With “BD-Live” discs, you can enjoy bonus contents that use Internet access.

For this BD-Live function, connection of a USB device is necessary along with Internet connection.

1

Perform network connection and settings.

(

>

9, 11)

2

Connect a USB device with 1 GB or more free space.

≥ The USB device is used as the local storage.

3

Insert the disc.

Deleting data on the USB device

Select “USB Management” in the Home menu

(

>

14), then select “BD-Video Data Erase” and press [OK].

≥ The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visit their website.

≥ “BD-Live Internet Access” may need to be changed for certain discs ( > 25).

Slideshow

Play a slideshow of photos and make various settings during the playback.

1

Insert the media.

2

Select “Photos”.

3

Select an item and press [G].

The following items can be set.

Start

Slideshow

Start the slideshow.

You can display still pictures in the selected folder one by one at a constant interval.

Display

Interval

Transition

Effect

Repeat Play

Change the display interval.

Select the effect when sliding pictures.

Set whether to repeat the slideshow.

≥ Still pictures displayed as “ with this unit.

” cannot be played back

VQT3V18

17

DMP-BD87_77_VQT3V18_eng.book 18 ページ 2011年12月22日 木曜日 午後8時19分

Enjoying Network

Service

(NETFLIX, etc.)

You can enjoy Network Service.

Network Service provides a variety of selected Internet services such as the following.

≥ Online movie rental service

≥ Video browsing service

Network Service

*

≥ Set “Network Service Lock” in “Ratings”, when restricting the use of Network Service. ( > 25)

≥ If using slow Internet connection, the video may not be displayed correctly. A high-speed Internet service with a speed of at least 6 Mbps is recommended.

≥ Be sure to update the firmware when a firmware update notice is displayed on the screen. If the firmware is not updated, you may not be able to use Network Service function properly. ( > 13)

≥ Network Service home screen is subject to change without notice.

≥ The services through Network Service are operated by their respective service providers, and service may be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no warranty for the content or the continuity of the services.

≥ All features of websites or content of the service may not be available.

≥ Some content may be inappropriate for some viewers.

≥ Some content may only be available for specific countries and may be presented in specific languages.

Settings

Internet

* Images are for illustration purposes, contents may change without notice.

Preparation

≥ Network connection ( > 9)

≥ Network setting ( > 11)

1

Press [NETWORK].

≥ NETFLIX can be accessed directly by pressing [NETFLIX] button.

2

Press [ 1 ] to select “Network Service”.

3

Select the item and press [OK].

To exit from Network Service

Press [EXIT] or [HOME].

18

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 19 ページ 2011年12月22日 木曜日 午後8時19分

Home Network feature

Playing back contents on the DLNA server

You can share photos, videos and music stored in the DLNA Certified media server (PC with

Windows 7 installed, smartphone, etc.) connected to your home network, and enjoy the contents with this player.

Using the Digital Media

Controller

You can use the smartphone, etc. as the Digital

Media Controller (DMC) to play back contents from DLNA server on the Renderer (this unit).

Possible applications:

Renderer

Server

*

Controller

*

Server

Player

Preparation

1 Perform network connection ( > 9) and network settings ( > 11) of this unit.

2 Perform Home Network settings of the connected equipment.

3 Add the contents and folder to the libraries of the Windows Media ® Player or the smartphone, etc.

≥ Playlist of Windows Media ® Player can play back only the contents that are stored in the libraries.

1

Press [HOME].

2

Select “Network”.

3

Select “Home Network”.

4

Select “DLNA Client”.

≥ The list can be updated by pressing [R] on the remote control.

5

Select the equipment and press [OK].

6

Select the item to play and press [OK].

≥ You may be able to use convenient functions depending on the content by pressing [OPTION].

≥ Control Panel is displayed once the playback starts. Press [OK] if the Control

Panel is not displayed, and press

[RETURN] to hide the Control Panel.

To exit from Home Network

Press [EXIT], [HOME] or [POP-UP MENU/TOP

MENU].

Renderer

Server

Controller

*

* DMC compatible software should be installed.

Preparation

Perform steps 1 to 3 . ( > left)

4 Perform the “Remote Device Settings”. (

>

25)

≥ You can register up to 16 devices.

1

Press [HOME].

2

Select “Network”.

3

Select “Home Network”.

4

Select “Media Renderer”.

5

Operate the DMC compatible devices.

To exit from Media Renderer screen

Press [HOME].

For more details, refer to the following website and the operating instructions for each of the equipment.

http://panasonic.jp/support/global/cs/

(This site is in English only.)

≥ Depending on the contents and the connected equipment, playback may not be possible.

≥ Items displayed in gray on the display cannot be played back by this unit.

≥ This unit can be played back via connected equipment only when controlled using DMC.

VQT3V18

19

DMP-BD87_77_VQT3V18_eng.book 20 ページ 2011年12月22日 木曜日 午後8時19分

“HDMI CEC”

This unit supports HDMI CEC (Consumer

Electronics Control).

You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.

Power off link

All connected equipment compatible with “HDMI

CEC”, including this unit, automatically turns off when you switch the television off.

Preparation

1 Set “HDMI CEC” to “On” ( > 26). (The default setting is “On”.)

2 Set the “HDMI CEC” operations on the connected equipment (e.g., TV).

3 Turn on all “HDMI CEC” compatible equipment and select this unit’s input channel on the connected TV so that the “HDMI CEC” function works properly.

Also when the connection or settings are changed, repeat this procedure.

≥ Operation cannot be guaranteed on all HDMI CEC devices.

Automatic input switching

Power on link

When play starts on the unit, the TV will automatically switch the input channel and the screen of this unit will be displayed.

Additionally when the TV is off, the TV will automatically turn on.

20

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 21 ページ 2011年12月22日 木曜日 午後8時19分

A variety of playback operations and settings can be performed from this menu.

Available options differ depending on the playing contents and the condition of the unit.

About Multi User Mode

: Settings of the items with this indication are saved by the respective users registered in the

Home menu.

Please refer to page 15 for details about user registration and switching.

1

Press [OPTION].

≥ When playing music, select “Playback

Settings” and press [OK].

e.g., BD-Video

2

Operation Menu

Soundtrack

Subtitle

Angle

Repeat Play

Status

Primary Video

Secondary Video

Top Menu

Pop-up Menu

1 ENG Dolby TrueHD M...

1

Off

MPEG-4 AVC

Select an item and change the settings.

To exit the screen

Press [OPTION].

Regarding Language : (

>

31)

Operation Menu

∫ Soundtrack

Show or change the soundtrack.

∫ Audio channel

Select the audio channel number.

∫ Subtitle

Change the subtitle settings.

∫ Angle

Select the number of the angle.

∫ Repeat Play

(Only when the elapsed time is being displayed on the unit’s display.)

Select the item that you want to repeat.

≥ The items displayed differ depending on the type of media.

≥ Select “Off” to cancel.

∫ Shuffle

Select whether or not to play random.

∫ Start Slideshow

Start the slideshow.

∫ Status

Show the status messages.

∫ Rotate Right

∫ Rotate Left

Rotate the still picture.

∫ Wallpaper

Set the still picture to the wallpaper of HOME menu.

( > 14)

∫ Icon Personalization

Set the still picture as your user icon.

( > 15)

VQT3V18

21

DMP-BD87_77_VQT3V18_eng.book 22 ページ 2011年12月22日 木曜日 午後8時19分

∫ Video

The recording method of original video appears.

∫ Primary Video

The recording method of original primary video appears.

∫ Secondary Video

Video

Soundtrack

Select on/off of images. The recording method of original video appears.

≥ During search/slow-motion or frame-by-frame, only the primary video is displayed.

Select on/off of audio and the language.

∫ Top Menu

Display Top Menu.

∫ Pop-up Menu

Display Pop-up Menu.

∫ Menu

Display Menu.

Video Settings

∫ Picture Mode

Select the picture quality mode during play.

≥ If you select “User”, you can change settings in

“Picture Adjustment”.

∫ Picture Adjustment

Specific picture quality settings can be performed.

∫ Progressive

Select the method of conversion for progressive output to suit the type of material being played.

≥ When the content is distorted change the settings from “Auto” to “Video”.

∫ Reset to Default Video Settings

Return video settings to the factory preset.

22

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 23 ページ 2011年12月22日 木曜日 午後8時19分

Setup menu

Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.

Some items in the Setup menu are common to the Option menu. You can get the same effect with both menus.

About Multi User Mode

: Settings of the items with this indication are saved by the respective users registered in the

Home menu.

Please refer to page 15 for details about user registration and switching.

1

While displaying the HOME menu, press

[SETTINGS].

Player Settings

Video

Audio

Language

Network

Ratings

System

Picture Mode

Picture Adjustment

HDMI Output

Black Level Control

Normal

Lighter

OK

RETURN

¾ 24p Output

When this unit is connected to a TV supporting

1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p.

≥ When BD-Video images other than 24p are played, images are output at 60p.

≥ 24p : A progressive image recorded at a rate of 24 frames per second (motion-picture film). Many

BD-Video movie contents are recorded in 24 frames/ second in accordance with the film materials.

¾ Deep Color Output

This setting is for selecting whether to use Deep

Color output when a television that supports

Deep Color is connected.

¾ Contents Type Flag

Depending on the playback content, the TV will output adjusting to the optimal method when a

TV that supports this function is connected.

∫ Black Level Control

Select lighter or darker for adjusting the black level to the desired setting for picture enhancement.

2

Select an item and change the settings.

To exit the screen

Press [EXIT].

Audio

∫ Dynamic Range Compression

You can listen at low volumes but still hear dialog clearly.

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥ “Auto” is effective only when playing Dolby TrueHD.

Video

∫ Picture Mode ( > 22)

∫ Picture Adjustment (

>

22)

∫ HDMI Output

Press [OK] to show the following settings:

¾ HDMI Resolution

The items supported by the connected devices are indicated on the screen as “ ¢ ”. When any item without “ ¢ ” is selected, the images may be distorted.

≥ If “Auto” is selected, the best suited output resolution to the connected television is automatically selected.

≥ To enjoy high-definition video up-converted to

1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition

Television). If this unit is connected to an

HDTV through other equipment, the other equipment must also be 1080p compatible.

∫ Digital Audio Output

Press [OK] to show the following settings:

¾ Dolby D/Dolby D +/Dolby TrueHD

¾

DTS/DTS-HD

Select the audio signal to output.

≥ Select “PCM”, when the connected equipment cannot decode the respective audio format.

This unit decodes the audio format and transmits to the connected equipment.

≥ Not making the proper settings may result in noise.

¾ BD-Video Secondary Audio

Select whether or not to mix the primary and secondary audio (including the button click sound).

If “Off” is selected, the unit outputs the primary audio only.

VQT3V18

23

DMP-BD87_77_VQT3V18_eng.book 24 ページ 2011年12月22日 木曜日 午後8時19分

¾ HDMI Audio Output

This setting selects whether or not to output audio from HDMI.

Network

∫ Easy Network Setting ( > 11)

∫ Downmix

Select the downmix system of multi-channel to

2-channel sound.

≥ Select “Surround encoded”, when the connected equipment supports the virtual surround function.

≥ There is no effect on “Bitstream” via HDMI AV

OUT.

≥ The audio will be output in “Stereo” in the following cases:

– AVCHD playback

– Playback of secondary audio (including the button click sound).

∫ Network Settings

Perform network-related settings individually.

Press [OK] to show the following settings:

¾ LAN Connection Mode

Select the LAN connection method.

¾ Wireless Settings

This allows the wireless router and connection settings to be set. Current connection settings and connection state can be checked.

Connection Setting

The wireless router connection wizard will be displayed.

Language

∫ Audio Language

Choose the language for audio.

≥ If “Original” is selected, the original language of each disc will be selected.

≥ Enter a code ( > 31) when you select “Other

¢¢¢¢ ”.

Double Speed Mode Setting (2.4GHz)

When a 2.4 GHz wireless format is used, this sets the connection speed.

≥ If you connect using the “Double Speed

Mode (40MHz)”, 2 channels use the same frequency band, and there is consequently a greater risk of reception interference. This can cause the connection speed to drop or become unstable.

∫ Subtitle Language

Choose the language for the subtitle.

≥ If “Auto” is selected and the language selected for “Audio Language” is not available, subtitles of that language will automatically appear if available on that disc.

≥ Enter a code (

>

31) when you select “Other

¢¢¢¢ ”.

∫ Menu Language

Choose the language for the disc menus.

≥ Enter a code (

>

31) when you select “Other

¢¢¢¢ ”.

¾ IP Address/DNS Settings

This is for checking the state of the network connection and setting the IP address and

DNS-related.

Press [OK] to show the respective setting.

¾ Proxy Server Settings

This is for checking the state of connection with the Proxy server and performing settings.

Press [OK] to show the respective setting.

∫ Subtitle Text

Select a suitable item according to the language used for MKV subtitles text.

≥ This item is displayed only after playing back a file.

∫ On-screen Language

Choose the language for menus and on-screen messages.

24

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 25 ページ 2011年12月22日 木曜日 午後8時19分

¾ Network Drive Connection

It is possible to access the shared folder of equipment not compatible with DLNA, such as the Windows XP operating system, and play back video, still pictures, and music on this unit.

For the setting and operation method of connected equipment, refer to the following Website. http://panasonic.jp/support/global/cs/

(This site is in English only.)

¾ Remote Device Settings ( > 19)

Press [OK] to show the following settings:

Ratings

The following items use the same password.

Don’t forget your password.

∫ DVD-Video Ratings

Set a ratings level to limit DVD-Video play.

∫ BD-Video Ratings

Set an age limit of BD-Video play.

∫ Network Service Lock

You can restrict the usage of Network Service.

Remote Device Operation

Enable to operate by DMC.

≥ If “On” is selected, “Quick Start” is fixed to “On”.

Setting Unit Name

Set the name of this unit to be displayed on the connected equipment.

≥ [BD871] [BD87] : With the default setting, the unit name will be displayed as “DMP-BD87”.

System

∫ Easy Setting

You can execute basic settings.

∫ Display Settings

Press [OK] to show the following settings:

Registration Type

Auto

Manual

Allow connection to all the equipment that is accessing this unit.

Set the permission of the connection individually for the equipment that is accessing this unit.

Remote Device List

Registering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected.

¾ BD-Live Internet Access ( > 17)

You can restrict Internet access when BD-Live functions are used.

≥ If “Allow (Limited)” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates.

¾ TV Aspect

Set to match the type of television connected.

When connected to a 4:3 aspect television and playing 16:9 ratio image:

4:3 Pan &

Scan

The sides are cut off so the picture fills the screen. When playing BD-Video, video is output as “4:3 Letterbox”.

4:3

Letterbox

Black bands appear at the top and bottom of the picture.

When connected to a 16:9 widescreen television and playing 4:3 ratio image:

16:9

16:9 Full

Video is displayed as a 4:3 ratio image in the center of the screen.

Video is displayed as a horizontally stretched 16:9 image.

VQT3V18

25

DMP-BD87_77_VQT3V18_eng.book 26 ページ 2011年12月22日 木曜日 午後8時19分

¾ Screen Saver Function

This is to prevent burn-in on the screen.

≥ When this is set to “On”:

If a list of playback content is displayed and there is no operation for 10 minutes or more, the screen switches to HOME menu automatically.

≥ While playing and pausing, etc., this function is not available.

¾

Press [OK] to show the following settings:

¾ Mixed Data Disc Option

Select the playback contents on discs with both data files and Video.

≥ If “MP3/JPEG/MKV” is selected, the video menu function (except MKV) cannot be

Status Messages

Choose whether to show status messages automatically.

¾ HDMI CEC

Set to use “HDMI CEC” function when connected via HDMI cable to a device that supports “HDMI CEC”.

≥ Select “Off” when you do not want to use

“HDMI CEC”.

Unit Settings played back.

If “BDAV/AVCHD” is selected, data file cannot be played back.

¾ Front Panel Display

Changes the brightness of the unit’s display.

≥ If “Auto” is selected, the display is set to bright and only dimmed during playback.

∫ Remote Control Code

Change the remote control code if other

Panasonic products react to this remote control.

∫ Firmware Update ( > 13)

Press [OK] to show the following settings:

¾ Automatic Update Check

When this equipment remains connected to the

Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.

¾ Update Now

You can update the firmware manually if a firmware update is available.

System Information

Press [OK] to show the following settings:

¾ License

Information about the software used by this unit is displayed.

¾ Firmware Version Information

Display firmware version of this unit and wireless LAN module.

∫ Restore Default Settings

This returns all values in the Setup menu and the

Option menu to the default settings, except for some settings of network, ratings, remote control code, language, etc.

¾ Edit User Information

Change the user information registered in the

Home menu.

∫ Quick Start

Speed of startup from power off is increased.

≥ When set to “On”, the internal control unit will be powered and the idle power consumption will increase compared to when set to “Off”. (About the power consumption

>

32)

26

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 27 ページ 2011年12月22日 木曜日 午後8時19分

Before requesting service, please perform the following steps.

General operation

To return to the factory preset.

¾ Select “Yes” in “Restore Default Settings” in the Setup menu. (

>

26) Do you have the latest firmware installed?

Firmware updates may be released to correct operating irregularities that are discovered with certain movies. (

>

13)

4

Make the following checks and visit our website for more information.

For U.S.A.

: www.panasonic.com/help

Enter the model number.

For Canada : http://www.panasonic.ca

4

Or visit our website to find a service center.

You can find a service center near you easily on our website.

Other support information :

“Customer Services Directory (United States and Puerto Rico)” ( > 37) or “Limited

Warranty (Only for CANADA)” ( > 38).

To return all settings to the factory preset.

¾ Reset the unit as follows:

1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than 5 seconds.

– “00rEt” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /I] on the unit until “08FIn” is displayed on the unit’s display.

3 Press and hold [OK] on the remote control or

[ < OPEN/CLOSE] on the unit for at least

5 seconds.

The remote control doesn’t work properly.

¾

Change the batteries in the remote control.

(

>

4)

¾

The remote control and main unit are using different codes. If “SEt  ” is displayed on the unit’s display when a button is pressed on the remote control, change the code on the remote control. (

>

26, 30)

The following do not indicate a problem with this unit:

– Regular disc rotating sounds.

– Image disturbance during search.

Unit doesn’t respond to remote control or front panel buttons.

Disconnect the power cord, wait 1 minute, then reconnect the power cord.

Cannot eject disc.

The unit may have a problem.

1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than 5 seconds.

– “00rEt” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /I] on the unit until “06FtO” is displayed on the unit’s display.

3 Press [OK] on the remote control or

[ < OPEN/CLOSE] on the unit.

The TV tuner mode is not displayed when the

TV is switched on.

¾ This phenomenon may occur, depending on the

TV setting, when “Quick Start” is set to “On”.

¾

Depending on the TV, this phenomenon may be prevented by reconnecting the HDMI cable to a different HDMI input terminal or by changing the HDMI auto connection setting.

You have forgotten your ratings password.

You want to cancel the ratings level.

¾ The ratings level returns to the factory preset.

1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than 5 seconds.

– “00rEt” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /I] on the unit until “03VL” is displayed on the unit’s display.

3 Press [OK] on the remote control or

[ < OPEN/CLOSE] on the unit.

VQT3V18

27

DMP-BD87_77_VQT3V18_eng.book 28 ページ 2011年12月22日 木曜日 午後8時19分

This unit does not recognize the USB connection correctly.

¾ Disconnect and reconnect the USB cable. If it still does not recognize the connection, turn the power of this unit off and on again.

¾ USB devices may not be recognized by this unit when connected using the following :

– a USB hub

– a USB extension cable other than the supplied with the Wireless LAN Adaptor

DY-WL5 (optional)

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

The unit switches to standby mode.

¾ This unit will automatically turn to standby mode after 30 minutes if it is inactive. (

>

16)

¾ One of the unit’s safety devices is activated

(U59 is displayed). Wait until this unit has cooled down.

Picture

The images from this unit do not appear on the television.

Picture is distorted.

¾ An incorrect resolution is selected in “HDMI

Resolution”. Reset the setting as follows:

1 While the unit is on, press and hold [OK], [B] and [Y] on the remote control at the same time for more than 5 seconds.

– “00rEt” is displayed on the unit’s display.

2 Repeatedly press [ 1 ] (right) on the remote control or [ Í /I] on the unit until “04PrG” is displayed on the unit’s display.

3 Press and hold [OK] on the remote control or

[ < OPEN/CLOSE] on the unit for at least

5 seconds.

Set the item again. ( > 23)

– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not output in bitstream, select “Yes” in “Restore Default

Settings” and make proper settings. ( > 26)

Video is not output in high-definition.

¾

Confirm that “HDMI Resolution” in the Setup menu is set properly. (

>

23)

No subtitles.

¾ When progressive output is on, closed captions/subtitles cannot be displayed.

The subtitles overlap closed captions recorded on discs.

¾ Turn off the subtitles or the closed caption setting on the TV.

( > 21)

A black band is displayed around the edge of the screen.

The aspect ratio of the screen is abnormal.

¾ Confirm the “TV Aspect” is set properly. ( > 25)

¾ Adjust the aspect setting on the television.

28

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 29 ページ 2011年12月22日 木曜日 午後8時19分

Audio Network

Cannot hear the desired audio type.

¾ Check the connections and the “Digital Audio

Output” settings. ( > 8, 23)

¾ To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to

“On” in the Setup menu. ( > 24)

I can’t connect to the network.

¾ Confirm the network connection and settings.

( > 9, 11, 24)

¾ Check the operating instructions for each device and connect accordingly.

Playback

Disc cannot be played.

¾ The disc is dirty. (

Still pictures (JPEG) do not play back normally.

¾ The images that were edited on the PC, such as Progressive JPEG, etc., may not be played back.

> 4)

I can’t play back BD-Live.

¾ Confirm that this unit is connected to the broadband Internet. ( > 9)

¾ Confirm the “BD-Live Internet Access” settings. ( > 25)

¾ Confirm a USB device is connected to the

USB port. ( > 14)

When using wireless LAN connection, video from the DLNA Certified media server is not played back or video frames are dropped during playback.

¾ Higher transfer rate router such as 802.11n

(2.4 GHz) wireless router may solve the problem. If you use 802.11n (2.4 GHz) wireless router, it is necessary to set the encryption type to “AES”.

Simultaneous use with a microwave, cordless telephone etc. at 2.4 GHz may result in connection interruptions or other problems.

¾ On the “Wireless Settings” screen ( > 24), the continuous lighting of at least 4 “Reception” indicators is the target for a stable connection.

If 3 or fewer indicators are lit or the connection is being interrupted, change the position or angle of your wireless router and see if the connection state improves. If there is no improvement, connect to a wired network and perform the “Easy Network

Setting” ( > 11) again.

VQT3V18

29

DMP-BD87_77_VQT3V18_eng.book 30 ページ 2011年12月22日 木曜日 午後8時19分

Messages

The following messages or service numbers appear on the television or unit’s display.

On the unit’s display

On the television

Cannot play.

¾ You inserted an incompatible disc (Discs recorded in PAL video, etc.).

SEt  (“  ” stands for a number.)

¾ The remote control and main unit are using different codes. Change the code on the remote control.

Press and hold [OK] and the indicated number button at the same time for more than

5 seconds.

Cannot display on this unit.

¾ You tried to play a non-compatible image.

No disc inserted.

¾

The disc may be upside down.

$

This operation is not available.

¾ Some operations are unsupported by the unit.

For example;

– During playback, reverse slow-motion or reverse frame-by-frame is not possible.

H  or F 

(“  ” stands for a number.)

¾

There is something unusual.

¾ Check the unit using the troubleshooting guide. If the service number remains displayed, do the following.

1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.

2 Press [ Í /I] to turn the power on.

If the service number remains displayed despite doing the above, request service from the dealer.

Inform the dealer of the service number when requesting service.

IP address is not set.

¾ The “IP Address” in “IP Address/DNS

Settings” is “---. ---. ---. ---”. Set the “IP

Address”, “Subnet Mask”, and “Default

Gateway”. (Select the automatic address acquisition if necessary.)

The current wireless network security setting is weak. It is recommended to change to a stronger security setting.

¾ Authentication type for the wireless LAN is set to “Open system”, or the encryption type is set to “No encryption”. It is recommended to encrypt for safety reasons. For details, refer to the instructions of the wireless router being used. Encryption is required when playing back video, etc., from DLNA compatible devices.

30

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 31 ページ 2011年12月22日 木曜日 午後8時19分

Supplemental information

Display languages list

Display Language Display Language Display Language

ENG

FRA

DEU

ITA

ESP

NLD

SVE

NOR

DAN

POR

RUS

English

French

German

Italian

Spanish

Dutch

Swedish

Norwegian

Danish

Portuguese

Russian

JPN

CHI

KOR

MAL

VIE

THA

POL

CES

SLK

HUN

FIN

Japanese

Chinese

Korean

Malay

Vietnamese

Thai

Polish

Czech

Slovak

Hungarian

Finnish

ARA

HIN

PER

IND

MRI

BUL

RUM

GRE

TUR

Arabic

Hindi

Persian

Indonesian

Maori

Bulgarian

Romanian

Greek

Turkish

Others

Language code list

Language Code Language Code Language Code

Abkhazian:

Afar:

Afrikaans:

Albanian:

Amharic:

Arabic:

Armenian:

Assamese:

Aymara:

Azerbaijani:

Bashkir:

6566

6565

6570

8381

6577

6582

7289

6583

6589

6590

6665

Basque:

Bengali; Bangla:

6985

Bhutani:

Bihari:

Breton:

6678

6890

6672

6682

Bulgarian:

Burmese:

6671

7789

Byelorussian: 6669

Cambodian: 7577

Catalan:

Chinese:

6765

9072

Corsican:

Croatian:

Czech:

Danish:

Dutch:

6779

7282

6783

6865

7876

English:

Esperanto:

Estonian:

Faroese:

Fiji:

Finnish:

French:

Frisian:

Galician:

Georgian:

German:

Greek:

Greenlandic:

Guarani:

6978

6979

6984

7079

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

Gujarati:

Hausa:

Hebrew:

Hindi:

Hungarian:

Icelandic:

Indonesian:

Interlingua:

Irish:

Italian:

Japanese:

Javanese:

Kannada:

Kashmiri:

Kazakh:

Kirghiz:

Korean:

7487

7578

7583

7575

7589

7579

Kurdish:

Laotian:

7585

7679

Latin: 7665

Latvian, Lettish: 7686

Lingala:

Lithuanian:

7678

7684

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

Macedonian:

Malagasy:

Malay:

Malayalam:

Maltese:

Maori:

Marathi:

Moldavian:

Mongolian:

Nauru:

Nepali:

Norwegian:

Oriya: 7982

Pashto, Pushto: 8083

Persian:

Polish:

Portuguese:

7065

8076

8084

Punjabi:

Quechua:

8065

8185

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

Telugu:

Thai:

Tibetan:

Tigrinya:

Tonga:

Turkish:

Turkmen:

Twi:

Ukrainian:

Urdu:

Uzbek:

Vietnamese:

Volapük:

Welsh:

Wolof:

Xhosa:

Yiddish:

Yoruba:

Zulu:

Rhaeto-Romance:

8277

Romanian:

Russian:

Samoan:

8279

8285

8377

Sanskrit:

Scots Gaelic:

8365

7168

Serbian: 8382

Serbo-Croatian: 8372

Shona:

Sindhi:

8378

8368

Singhalese:

Slovak:

Slovenian:

Somali:

Spanish:

Sundanese:

Swahili:

Swedish:

Tagalog:

Tajik:

Tamil:

Tatar:

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8679

6789

8779

8872

7473

8979

9085

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

Unit’s display list

This list only contains displays that are difficult to read.

Display Reading

BYE

Display Reading

OPEN

READ

STOP

Photo

DISC

NET

UPD  *

SET  *

PLAY

SETUP

SLIDE

USB

START

FINISH

No DISC,

No PLAY,

No READ,

UNSUPPORT

* “

” stands for a number.

VQT3V18

31

DMP-BD87_77_VQT3V18_eng.book 32 ページ 2011年12月22日 木曜日 午後8時19分

Precautions of Wireless

LAN connection

The following limits are in place regarding the usage of this unit or Wireless LAN Adaptor. You must be aware of these limits before using these devices.

Panasonic will in no way be responsible for any incidental damage which may arise due to a failure to obey these limits, or to any condition of use or disuse of these devices.

≥ Data transmitted and received over radio waves may be intercepted and monitored.

≥ This unit or Wireless LAN Adaptor contain delicate electronic components.

Please use these devices in the manner in which they were intended and follow the following points:

– Do not expose these devices to high temperatures or direct sunlight.

– Do not bend, or subject these devices to strong impacts.

– Keep these devices away from moisture.

– Do not disassemble or alter these devices in any way.

Specifications

Signal system

Operating temperature range

Operating humidity range

Video output

Audio output

HDMI AV output

USB slot

Ethernet

[BD871] [BD87]

Wireless LAN

NTSC i 5 o C to i 35 o C

( i 41 o F to i 95 o F)

10 % to 80 % RH

(no condensation)

Output level: 1.0 Vp-p (75 ≠ )

Output connector:

Pin jack (1 system)

Output level: 2 Vrms (1 kHz, 0 dB)

Output connector: Pin jack

Number of connectors:

2 channel

1 system

Output connector:

Type A (19 pin) 1 system

[BD871] [BD87]

USB2.0:

1 system

[BD77] USB2.0: 2 system

10BASE-T/100BASE-TX

1 system

Standard Compliance:

IEEE802.11 b/g/n

Frequency range:

2.4 GHz band

Security:

WPA TM / WPA2 TM

( Encryption Type: TKIP/AES,

Authentication Type: PSK ),

WEP (64 bit/128 bit)

LASER Specification Class I LASER Product

Wave length: 790 nm (CDs)/

658 nm (DVDs)/405 nm (BDs)

Laser power: No hazardous radiation is emitted with the safety protection

Power supply AC 120 V, 60 Hz

Power consumption Approx. 15 W

Power consumption in standby mode

Approx. 0.5 W

Power consumption in quick start standby mode

Approx. 5 W

Dimensions

(W k H k D)

430 mm k 36 mm k 199 mm

(Approx. 16 15/16 zk 1 7/16 zk

7 27/32 z )

Mass (Weight) Approx. 1.5 k g (3.3 lbs)

≥ Specifications are subject to change without notice.

32

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 33 ページ 2011年12月22日 木曜日 午後8時19分

File format

File format

MP3

JPEG

MKV

Extension Reference

“.MP3”, “.mp3”

“.JPG”, “.jpg”

This unit supports ID3 tags, but only titles, artist names and album names can be displayed.

≥ MOTION JPEG and

Progressive JPEG is not supported

≥ You may not be able to play back the file if you have edited the folder structure or the file name on a PC or other device.

“.MKV”, “.mkv” ≥ The video file and subtitles text file are

Subtitles text file

“.SRT”, “.srt”,

“.SSA”, “.ssa”,

“.ASS”, “.ass” inside the same folder, and the file names are the same except for the file extensions.

≥ Some MKV file may not be played back, depending on the video resolution and frame rate condition.

FLAC

WAV

“.flac”

“.wav”

Maximum sampling rate:

192 kHz/24 bit

Maximum sampling rate:

192 kHz/24 bit

≥ With certain recording states and folder structures, the play order may differ or playback may not be possible.

Restriction on use of unauthorized copied content

This unit adopts the following technology for copyright protection.

Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided at the Cinavia Online Consumer

Information Center at http://www.cinavia.com.

To request additional information about Cinavia by mail, send a postcard with your mailing address to:

Cinavia Consumer Information Center, P.O.

Box 86851, San Diego, CA, 92138, USA.

Audio information

The audio output differs depending on the settings on the unit. ( > 23, Digital Audio Output)

≥ The number of channels listed is the maximum possible number of output channels when connected to amplifier/receiver compatible with the respective audio format.

Terminal

HDMI AV

OUT

“Digital Audio Output”

“Bitstream”

Outputs using original audio *1

“PCM”

BD-Video :

7.1ch PCM *1

DVD-Video :

5.1ch PCM

*2

*1

*2

When “BD-Video Secondary Audio” is set to “On”, the audio will be output as Dolby Digital, DTS Digital Surround or 5.1ch PCM.

The maximum possible number of Dolby sound is 2ch

PCM.

VQT3V18

33

DMP-BD87_77_VQT3V18_eng.book 34 ページ 2011年12月22日 木曜日 午後8時19分

“AVCHD” is a trademark of Panasonic Corporation and Sony Corporation.

Java is a registered trademark of Oracle and/or its affiliates.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929;

7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All

Rights Reserved.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi

Corporation. Reverse engineering and disassembly are prohibited.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI   Licensing LLC in the United States and other countries.

This product is licensed under the AVC patent portfolio license and VC-1 patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard and VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC.

See http://www.mpegla.com.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.

The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

“Wi-Fi”, “Wi-Fi Protected Setup”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.

DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network

Alliance.

Windows is a trademark or a registered trademark of Microsoft Corporation in the United States and other countries.

34

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 35 ページ 2011年12月22日 木曜日 午後8時19分

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Corporation,

(2) the software owned by third party and licensed to Panasonic Corporation,

(3) the software licensed under the GNU General Public License, Version 2 (GPL v2),

(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL v2.1) and/or,

(5) open sourced software licensed under its applicable license terms including but not limited to ICU License, c-arse license, gSOAP

Public License 1.3b,

(6) Adobe Flash Lite for Digital Home Software licensed by Adobe Systems Incorporated or its affiliates.

For the software categorized as (3) and (4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those individuals at http://panasonic.net/avc/oss/bdplayer/AWBPM12.html

The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

At least three (3) years from delivery of products, Panasonic will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL v2.1.

Contact Information [email protected]

Source code is also freely available to you and any other member of the public via our website below.

http://panasonic.net/avc/oss/bdplayer/AWBPM12.html

For the software categorized as (5) includes as follows.

1. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.

(http://www.openssl.org/)

2. This product includes software developed by the University of California, Berkeley and its contributors.

3. FreeType code.

4. The Independent JPEG Group's JPEG software.

Further, For Adobe Flash Lite for Digital Home Software (“Flash Software”), please be aware of the following.

(i) You are not permitted to distribute and copy this Flash Software to any third party,

(ii) You are not permitted to modify the Flash Software and create derivative works of the Flash Software,

(iii) You are not permitted to decompile, reverse engineer, disassemble and otherwise reduce the Flash Software to a human-perceivable form,

(iv) You are not permitted to claim any damages, including direct, indirect, special, incidental, punitive, and consequential damages arising out of or in connection with the Flash Software,

(v) You fully agree that the ownership of the Flash Software is that of Panasonic Corporation and/or its suppliers or licensors,

(vi) You agree and acknowledge that it is possible that you cannot access the contents unless you do not obtain and install the latest version of the Flash Software.

ICU License - ICU 1.8.1 and later

COPYRIGHT AND PERMISSION NOTICE

Copyright (c) 1995-2010 International Business Machines Corporation and others

All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the

“Software”), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, provided that the above copyright notice(s) and this permission notice appear in all copies of the Software and that both the above copyright notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT

LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF

THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE

FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER

RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER

TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization of the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective owners.

VQT3V18

35

DMP-BD87_77_VQT3V18_eng.book 36 ページ 2011年12月22日 木曜日 午後8時19分 c-arse license

Copyright 1998 by the Massachusetts Institute of Technology.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.

M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.

gSOAP Public License Version 1.3b

Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All Rights Reserved.

THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

(1) MS/WMA

This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

(2) MS/PlayReady/Final Product Labeling

This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

(3) MS/PlayReady/End User Notices

Content owners use Microsoft PlayReady TM content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

(4) FLAC, WPA Supplicant

The software licenses are displayed when “License” in the Setup menu is selected.

( >

26)

Copyright 2004-2010 Verance Corporation. Cinavia TM is a Verance Corporation trademark. Protected by U.S. Patent 7,369,677 and worldwide patents issued and pending under license from Verance Corporation. All rights reserved.

36

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 37 ページ 2011年12月22日 木曜日 午後8時19分

Limited Warranty

(ONLY FOR U.S.A. AND PUERTO RICO)

Panasonic Consumer Marketing Company of North America,

Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus, New Jersey 07094

Panasonic Blu-ray and DVD Products Limited Warranty

Limited Warranty Coverage (For USA and Puerto Rico Only)

If your product does not work properly because of a defect in materials or workmanship, Panasonic Consumer Marketing Company of North America

(referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor.

Product or Part Name

Blu-ray Disc Player, Portable Blu-ray Disc

Player

Blu-ray Home Theater System

DVD Player, Portable DVD Player

DVD Recorder

Rechargeable Batteries (pack)

Parts

1 year

1 year

1 year

1 year

90 days

Labor

90 days

1 year

90 days

90 days

Not

Applicable

During the “Labor” warranty period there will be no charge for labor. During the

“Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold “as is”.

commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a Factory Service Center or other Authorized Servicer, or damage that is attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER

“LIMITED WARRANTY COVERAGE”.

THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS

PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY.

(As examples, this excludes damages for lost time, travel to and from the servicer, loss of or damage to media or images, data or other memory or recorded content. The items listed are not exclusive, but for illustration only.)

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY

OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED

WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this product develops during or after the warranty period, you may contact your dealer or Service Center. If the problem is not handled to your satisfaction, then write to the warrantor’s

Consumer Affairs Department at the addresses listed for the warrantor.

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED

WARRANTY, ARE YOUR RESPONSIBILITY.

Customer Services Directory (United States and Puerto Rico)

Mail-In Service

For assistance in the U.S.A. and Puerto Rico in obtaining repairs, please ship the product prepaid to:

Panasonic Exchange Center

4900 George McVay Drive

Suite B

McAllen, TX 78503 [email protected]

When shipping the unit, carefully pack, include all supplied accessories listed in the Owner’s Manual, and send it prepaid, adequately insured and packed well in a carton box. When shipping Lithium Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty.

Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase

Parts and Accessories; or make Customer Service and

Literature requests by visiting our Web Site at: http://www.panasonic.com/help or, contact us via the web at: http://www.panasonic.com/contactinfo

You may also contact us directly at:

1-800-211-PANA (7262)

Monday-Friday 9am-9pm,

Saturday-Sunday 10am-7pm EST

For hearing or speech impaired TTY users, TTY: 1-877-833-8855

Accessory Purchases (United States and Puerto Rico)

IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE

PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/

PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID

AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE

REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF

PURCHASE.

Limited Warranty Limits And Exclusions

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by the warrantor, or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids,

Purchase Parts, Accessories and Instruction Books online for all Panasonic

Products by visiting our Web Site at: http://www.pstc.panasonic.com

Or, send your request by E-mail to: [email protected]

You may also contact us directly at:

1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)

(Monday-Friday 9am-9pm EST)

Panasonic National Parts Center

20421 84th Ave S., Kent, WA 98032

(We accept Visa, MasterCard, Discover Card, American Express)

The model number and serial number of this product can be found on either the back or the bottom of the unit.

Please note them in the space provided below and keep for future reference.

For hearing or speech impaired TTY users, TTY: 1-866-605-1277

As of January 2012

User memo:

DATE OF PURCHASE

DEALER NAME

DEALER ADDRESS

TELEPHONE NUMBER

MODEL NUMBER

SERIAL NUMBER

VQT3V18

37

DMP-BD87_77_VQT3V18_eng.book 38 ページ 2011年12月22日 木曜日 午後8時19分

Limited Warranty (Only for CANADA)

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT - LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship under normal use and for a period as stated below from the date of original purchase agrees to, at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by Panasonic Canada Inc.

Technics Audio Product - One (1) year, parts and labour

Panasonic BD/DVD Product - One (1) year, parts and labour

Panasonic Audio Receivers - One (1) year, parts and labour

Home Theater Systems Product - One (1) year, parts and labour

This warranty is given only to the original purchaser, or the person for whom it was purchased as a gift, of a Panasonic brand product mentioned above sold by an authorized Panasonic dealer in Canada and purchased and used in

Canada, which product was not sold “as is”, and which product was delivered to you in new condition in the original packaging.

IN ORDER TO BE ELIGIBLE TO RECEIVE WARRANTY SERVICE HEREUNDER, A PURCHASE RECEIPT OR

OTHER PROOF OF DATE OF ORIGINAL PURCHASE, SHOWING AMOUNT PAID AND PLACE OF PURCHASE IS

REQUIRED

LIMITATIONS AND EXCLUSIONS

This warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by products not supplied by Panasonic Canada Inc., or failures which result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, set-up adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage, modification, introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than an Authorized Servicer, or damage that is attributable to acts of God.

Dry cell batteries are also excluded from coverage under this warranty.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY

BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. (As examples, this warranty excludes damages for lost time, travel to and from the Authorized Servicer, loss of or damage to media or images, data or other memory or recorded content. This list of items is not exhaustive, but for illustration only.)

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be applicable. This warranty gives you specific legal rights and you may have other rights which vary depending on your province or territory.

WARRANTY SERVICE

For product operation and information assistance, please contact:

PRODUCT OPERATION ASSISTANCE

Customer Care Centre: Telephone #: 1-800-561-5505

Fax #: (905) 238-2360

Email link: “Support

#

contact us

#

email” on www.panasonic.ca

PRODUCT REPAIRS

Please locate your nearest Authorized Servicentre.

Link: “Support

#

Panasonic Servicentre ® locator” on www.panasonic.ca

IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Carefully pack and send prepaid, adequately insured and preferably in the original carton.

Include details of the defect claimed, and proof of date of original purchase.

38

VQT3V18

DMP-BD87_77_VQT3V18_eng.book 39 ページ 2011年12月22日 木曜日 午後8時19分

Referencia rápida en español

(Spanish Quick Reference)

Conexiones básicas

Conexión a un televisor compatible con HDMI

Cable HDMI

HDMI IN

Conexión a un televisor con un cable para audio/vídeo

Cable de audio/vídeo

VIDEO IN

L

R

AUDIO IN

Conexión a un televisor compatible con HDMI y a un amplificador/receptor compatible con HDMI

Cable HDMI

HDMI IN

HDMI OUT

(ARC)

HDMI IN

(ARC)

Amplificador/

Receptor

Conecte el cable de alimentación de CA por último

A una toma de corriente doméstica

≥ Conéctelo cuando haya realizado el resto de conexiones.

Ahorro de energía

Esta unidad consume una pequeña cantidad de energía aunque esté ajustada en el modo de espera (Accionamiento rápido : Desactivado, aprox. 0,5 W). Para ahorrar energía cuando no vaya a utilizar la unidad durante mucho tiempo, desenchúfela de la toma de corriente.

Reproducción básica

Preparación

Encienda el televisor y seleccione la entrada de vídeo adecuada en el televisor.

1

Pulse [ Í ] para encender la unidad.

Después de conectar su nuevo reprodutor y pulsar el botón de encendido, aparecerá la pantalla de la configuración básica.

2

Inserte el medio.

Inicia la reproducción

Pulse [ 1 PLAY].

Parada

Pulse [ ∫ STOP].

La posición de detención se memoriza.

Función de reanudación de la reproducción

Pulse [ 1 PLAY] para reiniciar la reproducción desde esta posición.

≥ La posición se borra si se abre la bandeja o se pulsa

[ ∫ STOP] varias veces para visualizar “StOP” en el visor de la unidad.

≥ En los discos BD-Video incluidos los BD-J, la función de reanudación de la reproducción no funciona.

Pausa

Pulse [ ; PAUSE].

≥ Pulse [ ; PAUSE] otra vez o [ 1 PLAY] para reiniciar la reproducción.

Búsqueda/Cámara lenta

Búsqueda

Durante la reproducción, pulse [SEARCH 6 ] o [SEARCH 5 ].

≥ Música y MP3: La velocidad está fija en un paso.

Cámara lenta

Durante la pausa, pulse [SEARCH 5 ].

La velocidad aumenta hasta 5 pasos.

≥ Pulse [ 1 PLAY] para recuperar la velocidad de reproducción normal.

Salto

Durante la reproducción o la pausa, pulse

[ : ] o [ 9 ].

Salta hasta el título, capítulo o pista que desee reproducir.

VQT3V18

39

DMP-BD87_77_VQT3V18_eng.book 40 ページ 2011年12月22日 木曜日 午後8時19分

Index

A Audio

Changing audio . . . . . .16

Language . . . . . . . .24, 31

B BD-Live . . . . . . . . . . . . . .17

D DLNA . . . . . . . . . . . . . . . .19

F File format. . . . . . . . . . . .33

Firmware update . . . . . . . 13

H HDMI CEC . . . . . . . . . . . .20

L LAN . . . . . . . . . . . . . . . . . .9

Language

Audio . . . . . . . . . . . . . .24

Menu . . . . . . . . . . . . . .24

On-screen. . . . . . . . . . .24

Soundtrack . . . . . . . . . .21

Subtitle . . . . . . . . . .21, 24

M Media Renderer . . . . . . 19

Multi User Mode . . . . . . . .15

N Network

Connection . . . . . . . . . . 9

Setting . . . . . . . . . 11, 24

Network Service . . . . . . . 18

P Pop-up menu . . . . . . . . . .17

Q Quick Start . . . . . . . . . . 26

R Restore Default

Settings . . . . . . . . . . . . . 26

Resume play function . . . 16

S Subtitle . . . . . . . . . . . . . 21

U USB device . . . . . . . . . . . 6

W Wireless LAN . . . . . . . . . 9

24p . . . . . . . . . . . . . . . . . . 23

USA Only: Disposal may be regulated in your community due to environmental considerations.

For disposal or recycling information, please visit

Panasonic website: http://www.panasonic.com/environmental/ or call 1-888-769-0149.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the

European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.

®

Panasonic has determined that this product meets the

®

ENERGY STAR guidelines for energy efficiency.

For Canada only: The word “Participant” is

used in place of the word “Partner”.

Panasonic Consumer Marketing

Company of North America,

Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus,

New Jersey 07094 http://www.panasonic.com

Panasonic Canada Inc.

5770 Ambler Drive

Mississauga, Ontario

L4W 2T3 www.panasonic.ca

C Panasonic Corporation 2011

Printed in China pr

VQT3V18

F1211HA0

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals