User`s Manual - AV-iQ

User`s Manual - AV-iQ
User's Manual
Version 1.1
Em104P-i6023
Intel Celeron ULV 400MHz board with
VGA/LCD, TV-out, audio, dual
Ethernet, CF socket, PC/104 and
PC/104 Plus interface
Copyright© 2002
All Rights Reserved.
The information in this document is subject to change without prior notice in
order to improve the reliability, design and function. It does not represent a
commitment on the part of the manufacturer.
Under no circumstances will the manufacturer be liable for any direct,
indirect, special, incidental, or consequen-tial damages arising from the use or
inability to use the product or documentation, even if advised of the possibility
of such damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Warning
Single Board Computers and their components contain very delicate
Integrated Circuits (IC). To protect the Single Board Computer and its
components against damage from static electricity, you should
always follow the following precautions when handling it :
1. Disconnect your Single Board Computer from the power source when you
want to work on the inside
2. Hold the board by the edges and try not to touch the IC chips, leads or
circuitry
3. Use a grounded wrist strap when handling computer components.
4. Place components on a grounded antistatic pad or on the bag that came
with the Single Board Computer, whenever components are separated
from the system
5. The CPU need the Heat Sink on it.
Technical Suppor
Supportt
If you have any technical difficulites, please consult the user's manual first
at:
ftp://ftp.arbor.com.tw/pub/manual
Please do not hesitate to call or e-mail our customer service when you still
can not find out the answer.
http://www.arbor.com.tw
E-mail:[email protected]
Specifications
System
•
CPU : Intel Ultra Low Voltage Embedded Celeron 400MHz to Pentium3
933MHz processor with FSB 100/133 MHz EBGA package.
•
Chipset : VIA VT8606 TwisterT with Integrated Savage4 AGP 4X Graphics
core and VT82C686B Super "South Bridge"
•
BIOS : AWARD® Flash BIOS
•
L2 Cache : Integrated on CPU (256 KB ~ 512 KB)
•
DRAM Memory : Onboard SODIMM socket up to 512MB of SDRAM
•
Enhanced IDE with UltraDMA : supports 2 port and up to 4 ATAPI
devices, Ultra DMA transfer 33 / 66 and 100 MB/sec.
•
Real-time Clock : built-in chipset with lithium battery backup(built on
carrier board). CMOS data backup of BIOS setup and BIOS default.
Multiple I/O
•
Serial Ports :
Three RS-232C port (COM1, 3, 4)
One RS-232C/422/485 port (COM2)
•
USB : Two 2x5 Pin header supports up to 4 USB 1.1 devices
•
Ethernet : Two Realtek 8100BL 10/100MBPS
•
Parallel Port : 1 x parallel port supports SPP/EPP/ECP mode
•
Keyboard and Mouse : One 1x6 pin wafer connector for PS/2 Keyboard and mouse
•
Audio Chipset: VIA VT82C686B, AC97 2.0 compliant, Multistream Direct
Sound and Direct Sound 3D acceleration.
Display Controller
•
Chipset : 4x AGP S3 Savage4 3D and S3 Savage 2000 2D engines
integrated in VT8606 supports up to 32MB of Shared Memory
•
Display Type : Flat Panel and CRT displays up to 1280x1024 @ 32 bpp
- Lcd interface : Flat Panel 36-bit TFT/DSTN interface
- LVDS interface(PBE-1000) : Scalable Bandwidth is ranging from
25MHz~112MHz(VGA~SXGA) 18/36-bit one/two channel LVDS interface
- TV-Out : Support NTSC,PAL NTSC-EIA(Japan) formats . Support 640x480
resolutions
•
Resolution: Single Channel of LVDS / 36-bit of TTL and 12-bit of TMDS; all
resolutions are supported up to 1280x1024.
Mechancial
•
•
•
Dimension (L x W): 114 x 95 mm (4.5" x 3.7")
Operative Humidity: 5% ~ 95% (non condensing)
Operating Temperature : 0 to 60° C (32 to 140 ° F)
Packing list
Before you begin installing your single board computer, please make sure that
the following materials have been shipped:
> 1 x Em104P-i6023
> 1 x Quick Installation Guide
> 1 x CD-ROM ( for driver used)
> 1 x Warranty Card
Packing list
Before you begin installing your single board computer, please make sure that
the following materials have been shipped:
> 1 x EmETX-i602 EXT Embedded Intel Celeron(or PIII Tulatin) SBC
> 1 x Quick Installation Guide
> 1 x CD-ROM ( for driver used)
> 1 x Warranty Card
Ordering Codes
EmETX-i6023/C400
Intel Celeron ULV 400MHz board with VGA/LCD,
TV-out, audio, dual Ethernet, CF socket, PC/104
and PC/104 Plus interface
Board Dimension
ETX Connector
ETX2
ETX1
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND
PCICLK3
GND
PCICLK1
REQ#3
GNT#2
REQ#2
REQ#1
GNT#0
VCC
SERIRQ
AD0
AD1
AD4
AD6
CBE#0
AD8
GND
AD10
AD11
AD12
AD13
AD14
AD15
CBE#1
VCC
PAR
GPERR#
PME#
LOCK#
TRDY#
IRDY#
FRAME#
GND
AD16
AD17
AD19
AD20
AD22
AD23
AD24
VCC
AD25
AD28
AD27
AD30
PCIRST#
INTC#
INTA#
GND
GND
PCICLK4
GND
PCICLK2
GNT#3
3V
GNT#1
3V
RESERVED
VCC
REQ#0
3V
AD2
AD3
AD5
AD7
AD9
GND
AUXAL
MIC
AUXAR
ASVCC
SNDL
ASGND
SNDR
VCC
SERR#
RESERVED
USB2DEVSEL#
USB3STOP#
USB2+
GND
CBE#2
USB3+
AD18
USB0AD21
USB1CBE#3
VCC
AD26
USB0+
AD29
USB1+
AD31
INTD#
INTB#
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND
PCICLK3
SD14
GND
SD13
PCICLK1
SD12
REQ#3
SD11
GNT#2
SD10
REQ#2
SD9
REQ#1
SD8
GNT#0
MEMW#
VCC
MEMR#
SERIRQ
LA17
AD0
LA18
AD1
LA19
AD4
LA20
AD6
LA21
CBE#0
LA22
AD8
LA23
GND
AD10
SBHE#
AD11
SA0
AD12
SA1
AD13
SA2
AD14
SA3
AD15
SA4
CBE#1
SA5
VCC
PAR
SA6
PERR#
SA7
PME#
SA8
LOCK#
SA9
TRDY#
SA10
IRDY#
SA11
FRAME#
SA12
GND
AD16
SA13
AD17
SA14
AD19
SA15
AD20
SA16
AD22
SA18
AD23
SA19
AD24
IOCHRDY
VCC
AD25
SD0
AD26
SD2
AD27
SD3
AD30
DREQ2
PCIRST#
SD5
INTR#C
SD6
INTR#A
IOCHK#
GND
GND
SD15
MASTER#
DREQ7
DACK#7
DREQ6
DACK#6
DREQ5
DACK#5
DREQ0
DACK#0
IRQ14
IRQ15
IRQ12
IRQ11
IRQ10
IO16#
GND
M16#
OSC
BALE
TC
DACK#2
IRQ3
IRQ4
VCC
IRQ5
IRQ6
IRQ7
SYSCLK
REFSH#
DREQ1
DACK#1
GND
DREQ3
DACK#3
IOR#
IOW#
SA17
SMEMR#
AEN
VCC
SMEMW#
SD1
NOWS#
SD4
IRQ9
SD7
RSTDRV
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
ETX Connector
ETX4
ETX3
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND
R
HSY
VSY
DETECT#/N.C
TX2CLK#
TX2CLK+
GND
TX2D1+
TX2D1#
GND
TX1D3#
TX1D3+
GND
TX1D2#
TX1D2+
GND
TX1D0#
TX1D0+
VCC
N.C
N.C
BIASON
COMP
SYNC
`
N.C
VCC
STB#
N.C
IRRX
IRTX
RXD2
GND
RTS#2
DTR#2
DCD#2
DSR#2
CTS#2
TXD#2
RI2#
VCC
RXD1
RTS#1
DTR#1
DCD#1
DSR#1
CTS#1
TXD#1
RI1#
GND
GND
B
G
DDCK
DDDA
TX2D3#
TX2D3+
GND
TX2D2+
TX2D2#
GND
TX2D0+
TX2D0#
GND
TX1CLK+
TX1CLK#
GND
TX1D1+
TX1D1#
VCC
N.C
BLON#
DIGON
Y
C
N.C
GND
AFD#
PD7
ERR#
PD6
INIT#
GND
PD5
SLIN#
PD4
PD3
PD2
PD1
PD0
VCC
ACK#
BUSY#
PE
SLCT#
MSCLK
MSDAT
KBCLK
KBDAT
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
53
55
57
59
61
63
65
67
69
71
73
75
77
79
81
83
85
87
89
91
93
95
97
99
GND
5V_SB
PS_ON
PWRBTN#
N.C
WDTOUT
ROMKBCS#
N.C
VCC
OVCR#
EXTSMI#
SMBCLK
SIDE_CS3#
SIDE_CS1#
SIDE_A2
SIDE_A0
GND
PD33/66SEL
SIDE_A1
SIDE_INTRQ
SD33/66SEL
SIDE_AK#
SIDE_RDY
SIDE_IOR#
VCC
SIDE_IOW#
SIDE_DRQ
SIDE_D15
SIDE_D0
SIDE_D14
SIDE_D1
SIDE_D13
GND
SIDE_D2
SIDE_12
SIDE_D3
SIDE_D11
SIDE_D4
SIDE_D10
SIDE_D5
VCC
SIDE_D9
SIDE_D6
SIDE_D8
RING IN
RXD#
RXD
TXD#
TXD
GND
GND
PWGIN
SPEAKER
BATT
LILED
ACTLED
SPEEDLED
12CLK
VCC
GPCS#
12DAT
SMBDAT
CPU_FAN
DASP#
PIDE_CS3#
PIDE_CS1#
GND
PIDE_A2
PIDE_A0
PIDE_A1
N.C
PIDE_INTRQ
PIDE_AK#
PIDE_RDY
VCC
PIDE_IOR#
PIDE_IOW#
PIDE_DRQ
PIDE_D15
PIDE_D0
PIDE_D14
PIDE_D1
GND
PIDE_D13
PIDE_D2
PIDE_D12
PIDE_D3
PIDE_D11
PIDE_D4
PIDE_D10
VCC
PIDE_D5
PIDE_D9
PIDE_D6
WOL
PIDE_D8
SIDE_D7
PIDE_D7
HDRST#
GND
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
90
92
94
96
98
100
Jumper/Connector in Top Side
Connectors
Lable
Function
Page
LCD1
LCD TTL Connector 1
9
LCD2
LCD TTL Connector 2
9
ETX1
PCI Bus, USB, Audio
10
ETX2
ISA Bus
10
ETX3
VGA,LCD,Video,COM1,COM2,LPT,IrDA,M/K
11
ETX4
IDE1,IDE2,Ethernet,Miscellaneous
11
Flat Panel VGA
LCD1
Type : Onboard 40-pin Box Header (Hirose DF-40DS-1.25C)
Pin
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
Description
VCC5V
GND
VCC3V
NC
FPD0
FPD2
FPD4
FPD6
FPD8
FPD10
FPD12
FPD14
FPD16
FPD18
FPD20
FPD22
GND
SHFCLK
M(DE)
ENABLK
Pin
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
Description
VCC5V
GND
VCC3V
GND
FPD1
FPD3
FPD5
FPD7
FPD9
FPD11
FPD13
FPD15
FPD17
FPD19
FPD21
FPD23
GND
HSYNC
VSYNC
ENAVEE
LCD2
Type : Onboard 20-pin Box Header (Hirose DF-20DS-1.25C)
Pin
1
3
5
7
9
11
13
15
17
19
Description
GND
FPD24
FPD26
FPD28
FPD30
FPD32
FPD34
GND
NC
NC
Pin
2
4
6
8
10
12
14
16
18
20
Description
GND
FPD25
FPD27
FPD29
FPD31
FPD33
FPD35
GND
NC
NC
Jumper/Connector in Back Side
Label
Function
INV1
LCD Inverter connector
LVDS1
LVDS Connector (30 pin)
TV1
TV-Out
PWR1
Power terminator/6P Power Connector
IDE1
Primary IDE Connector
CFD1
Compact Flash socket (shared with 2nd IDE Master)
VGA1
VGA Display Connector
IR1
Infrared (IR) Connector
USB1
USB 0/1 Connector
USB2
USB 2/3 Connector
COMA
COM1 / COM2
COMB
COM3 / COM4
LPT1
Parallel Port
LAN1
10/100 Base-T Ethernet Connector from ETX core module
LAN2
10/100 Base-T Ethernet Connector from carrier board
LANLED1
LAN LINK / ACTIVE LED status
LANLED2
LAN LINK / ACTIVE LED status
AUDIO1
Audio Connector
FDD1
Floppy Disk Drive Connector
KBM1
PS/2 Keyboard & Mouse
FAN1
+5V DC power source for FAN
JFRT1
Switches & Indicators
DIO1
Digital Input/Output
PC104
PC104 ISA Connector
PC104+
PC104+ PCI Connector
JCOM1
RS-422/485 Connector
CMOS Jumper Settings
CMOS Setup (JBAT1)
1
2
3
JB AT 1
Type : JBAT1: onboard 3-pin header
CMOS Setup (JBAT1)
JBAT1
Keep CMOS
1-2
ON
Clear CMOS
default setting : Keep CMOS
2-3
ON
Serial Port Selection (RS232C/422/485)
RS-232C/422/485 Mode on COM2 (JRS2)
The onboard COM2 port can be configured to operate in RS-232C mode or in
different RS-422/485 modes.
5 3 1
JRS2
6 4 2
Mode Selection
1-2
3-4
5-6
RS-232C
ON
OFF
OFF
RS-422
OFF
ON
OFF
RS-485
OFF
OFF
ON
Default setting RS-232
RS422/485 Connector
Connector : JCOM1
Type : Onboard 4-pin boxheader
JCOM1
Pin
Description
Pin
Description
1
3
RS485 RTX+/RS422 TX+
RS422 RX+
2
4
RS485 RTX-/RS422 TXRS422 RX-
Watchdog Timer
Watchdog Output (JWT)
JW T
Mode Setting
Watchdog Mode
JWT
Enabled for Active NMI(I/O Channel Check)
1-2
Enabled for System Reset
2-3
Disable Watchdog Timer
default setting Enabled
None
1
2
3
LVDS Voltage Seletion
LVDS Operation (JVLCD1)
Type : onboard 3-pin dip switch
3 2 1
J V L C D1
LVDS VOLTAGE SELECT
JVLCD1
5V
3.3V
1-2
2-3
default setting 3.3V
LCD Inverter Connector
1 2 34 5
Connector : INV1
Type : Onboard 5-pin mini boxheader
Pin
Description
Pin
Description
1
3
5
+12 V
BLON
GND
2
4
GND
NA
LVDS LCD Connector
Connector : LVDS1
Type : onboard DF-13-30P-1.25V
LVDS1
1
VDD
2
VDD
3
TX1CLK+
4
TX2CLK+
5
TX1CLK-
6
TX2CLK-
7
GND
8
GND
9
TX1D0+
10
TX2D0+
11
TX1D0-
12
TX2D0-
13
GND
14
GND
15
TX1D1+
16
TX2D1+
17
TX1D1-
18
TX2D1-
19
GND
20
GND
21
TX1D2+
22
TX2D2+
23
TX1D2-
24
TX2D2-
25
GND
26
GND
27
TX1D3+
28
TX2D3+
29
TX1D3-
30
TX2D3-
VDD could be selected by JVLCD1 +5V or +3.3V
TV-out Connector
Connector : TV1 (Function not available in Em104P-i7013)
1
Type: Onboard 6-pin mini boxheader
PIN
Description
1
TV_COMP
2
GND
3
TV_Y
4
GND
5
TV_C
6
GND
Power Connector
Connector : PWR1
Type : onboard 6-pin Terminator
Pin
Description
1
+12V
2
GND
3
GND
4
GND
5
+5V
6
+5V
PW R1
+5 V
+5 V
GND
GND
GND
+12 V
6
Enhanced IDE Connector
1
2
Connector : IDE1
Type : One onboard 44-pin box headers, primary IDE
Pin
Description
Pin
Description
1
#RESET
2
GND
3
D7
4
D8
5
D6
6
D9
7
D5
8
D10
9
D4
10
D11
11
D3
12
D12
13
D2
14
D13
15
D1
16
D14
17
D0
18
D15
19
GND
20
NC
21
REQ
22
GND
23
#IOW
24
GND
25
#IOR
26
GND
27
#IORDY
28
IDESEL
29
#DACK
30
GND
31
IRQ
32
NC (-IOCS16)
33
ADDR1
34
CBLID
35
ADDR0
36
ADDR2
37
#CS1
38
#CS3(#HD SELECT1)
39
#ACT
40
GND
41
Vcc
42
Vcc
43
GND
44
NC
Compact Flash Connector
Connector : CFD1
Type : 50-pin compact flash type I/II (Share 2nd IDE Master)
Pin
Description
Pin Description
Pin Description
1
GND
1 8 ADDR2
3 5 IO WRITE
3 6 +5V
2
DATA3
1 9 ADDR1
3
DATA4
2 0 ADDR0
3 7 IRQ15
4
DATA5
2 1 DATA0
3 8 +5V
5
DATA6
2 2 DATA1
3 9 CSEL
6
DATA7
2 3 DATA2
4 0 N/C
7
CS#1
2 4 N/C (-IOCS16)
4 1 IDE RESET
8
GND
2 5 GND
4 2 IO READY
9
GND
2 6 GND
4 3 N/C
10
GND
2 7 DATA11
4 4 +5V
11
GND
2 8 DATA12
4 5 DASP
12
GND
2 9 DATA13
4 6 DIAG
13
+5V
3 0 DATA14
4 7 DATA8
14
GND
3 1 DATA15
4 8 DATA9
15
GND
3 2 CS#3
4 9 DATA10
16
GND
3 3 GND
5 0 GND
17
GND
3 4 IO READ
Note: CFD1 does not support hot swap
VGA Connector
Connector : VGA1
VGA1
2
Type: Onboard 16-pin mini boxheader
1
Pin
Description
Pin
Description
Pin Description
1
RED
6
GND
1 1 NC
2
GREEN
7
GND
1 2 VDDAT
3
BLUE
8
GND
1 3 HSYNC
4
NC
9
NC
1 4 VSYNC
5
GND
10
GND
1 5 VDCLK
16
NC
IrDA Connector
54321
Connector : IR1
Type : Onboard 5-pin header
IR1
Pin
Signal
Pin
Signal
1
+5V
2
NC
3
IRRX
4
GND
5
IRTX
Keyboard & PS/2 Mouse
654321
Connector : KBMS
Type : onboard wafer 1x6-pin
KBMS
Pin
Description
Pin
Description
1
KB_DATA
2
GND
3
MS_DATA
4
KB_CLK
5
+5V
6
MS_CLK
COMA & COMB Connector
Connector : COMA RS232 Serial Port Connector (COM1,COM2)
Type : onboard 2x10-pin box header
Pin
Description
Pin
Description
1
DCD1
2
3
TXD1
4
RXD1
DTR1
5
GND
6
DSR1
7
RTS1
8
CTS1
9
RI
10
N/C
11
DCD2
12
RXD2
13
TXD2
14
DTR2
15
GND
16
DSR2
17
RTS2
18
CTS2
19
RI
20
N/C
Connector : COMB RS232 Serial Port Connector (COM3,COM4)
Type : onboard 2x10-pin box header
Pin
Description
Pin
Description
1
DCD3
2
3
TXD3
4
RXD3
DTR3
5
GND
6
DSR3
7
RTS3
8
CTS3
9
RI
10
N/C
11
DCD4
12
RXD4
13
TXD4
14
DTR4
15
GND
16
DSR4
17
RTS4
18
CTS4
19
RI4
20
N/C
Parallel Port
25
Connector : LPT1
Type : onboard 26-pin box header
1
2
26
L PT1
Pin
Description
Pin
Description
1
#STROBE
14
#AUTO FEED
2
DATA0
15
#ERROR
3
DATA1
16
#INITIALIZE
4
DATA2
17
#SELECT INPUT
5
DATA3
18
GND
6
DATA4
19
GND
7
DATA5
20
GND
8
DATA6
21
GND
9
DATA7
22
GND
10
#ACKNOWLEDGE
23
GND
11
BUSY
24
GND
12
PAPER EMPTY
25
GND
13
SELECT
26
GND
USB Connector
Connector: USB1, USB2
Type:onboard Two 10-pin headers for four USB ports
Pin
Description
Pin
Description
1
5V
2
5V
3
USBD0-
4
USBD1-
5
USBD0+
6
USBD1+
7
GND
8
GND
9
GND
10
Key
10
9
2
1
USB1
Audio Interface
1
9
Connector : Audio1
Type : Onboard 10-pin box header
2
10
Pin
Description
Pin
Description
1
3
5
7
9
LINE IN LEFT
GND
MIC
GND
SPEAKER LEFT
2
4
6
8
10
LINE IN RIGHT
GND
NC
GND
SPEAKER RIGHT
Audio1
Fast Ethernet Connectors
1
2
LAN Port (10/100Mbps)
9
10
LA N 1
Connector : LAN1 & LAN2
Type : Two 2x5 pin header for LAN ports
Pin
1
2
3
4
Desciption
TX+
TX-
RX+
NC
5
NC
Pin
6
7
8
9
10
Description
RX-
NC
NC
NC
Key
LAN LED Indicator
LAN LED Indicator on RJ-45 connector
Connector : LANLED1 & LANLED2
TYPE : Onborad 4-pin connector
Pin
Description
1-2
Activity
3-4
Link
(-) 1
(-) 3
2 (+)
4 (+)
LANLED1
8-bit Digital I/O
Connector : DIO1
Type : Onboard 20-pin header
1
2
20
19
Pin
Description
Pin
Description
1
DO0
2
DO1
3
DO2
4
DO3
5
DO4
6
DO5
7
DO6
8
DO7
9
GND
10
GND
11
DI0
12
DI1
13
DI2
14
DI3
15
DI4
16
DI5
17
DI6
18
DI7
19
+5V
20
+12V
Output I/O Address :208H
Input I/O Address:200H
System Fan Connector
Connector : FAN1
Type : onboard 3-pin header
Pin
Description
1
N/A
2
+5V
3
GND
123
FAN1
Switches and Indicators
1 2
Connector : JFRT1
Type : onboard 10-pin header
Pin
Description
1-2
Reset
3-4
Power LED
5-6
HDD LED
7-8
Exteranal speaker
9-10
External SMI
RESET
PLED+
HLED+
SPK+
EXTSMI
GND
PLEDHLEDSPKGND
9 10
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement