MEN F19P Datasheet - OEM Technology Solutions

MEN F19P Datasheet - OEM Technology Solutions
F19P Data Sheet - 2010-02-08
Embedded Solutions
F19P - 3U CompactPCI® PlusIO
Intel® Core™ 2 Duo SBC
n
n
n
n
n
n
n
n
n
n
n
The F19P versatile 4HP/3U single-board computer is a
continuation of MEN's proven range of Intel® CPU
boards.
It is equipped with the Intel® high-performance Core 2
Duo processor SP9300 running at 2.26 GHz and offering
the latest multi-core processor architecture from
Intel® with full 64-bit support. The board delivers an
excellent graphics performance and is designed
especially for embedded systems which require high
computing performance with low power consumption.
The F19P offers a 32-bit/33-MHz CompactPCI® bus
interface and can also be used without a bus system.
It offers 4 USB 2.0 and 4 fast (3Gb/s) SATA interfaces
as well as 4 PCI Express® x1 links and one Gigabit
Ethernet on the J2 rear I/O connector which is
compatible with the PICMG 2.30 CompactPCI® PlusIO
specification.
A total of seven PCI Express® lanes for high-speed
communication (such as Gigabit Ethernet) are supported
on the F19P. 3 x1 PCIe® links are used for the three
onboard Ethernet interfaces. 4 x1 or 1 x4 PCIe® links
are available via rear I/O or on a specific side card.
The F19P is equipped with a state-of-the-art fast DDR3
DRAM which is soldered to the F19P to guarantee
optimum shock and vibration resistance. A robust
CompactFlash® and microSD™ card device which are
connected via a USB interface offer nearly
unlimited space for user applications.
The standard I/O available at the front panel of F19P
includes graphics on a VGA connector, two PCIe®-driven
1
Intel® Core™ 2 Duo SP9300, 2.26 GHz
Dual-core 64-bit processor
4 HP system master or stand-alone
32-bit CompactPCI® and PICMG 2.30 PlusIO
Up to 4 (8) GB DDR3 DRAM soldered
CompactFlash® and microSD™ card slots
Standard front I/O: VGA, 2 Gb Ethernet, 2 USB
Standard rear I/O: 4 PCIe®, 4 USB, 4 SATA,
1 Gb Ethernet
Other I/O (onboard, side card): SATA, SDVO,
HD audio, USB, UART etc.
Board controller
-40 to +85°C screened version
Gigabit Ethernet as well as two USB 2.0 ports.
The F19P can be extended by different side cards.
Additional functions include two digital video inputs
for flat panel connection via DVI (multimedia), a
variety of different UARTs or another four USBs, SATA
for hard disk connection and HD audio.
Thermal supervision of the processor and a watchdog
for the operating system complete the functionality of
the F19P.
The F19P operates in Windows® and Linux environments
as well as under real-time operating systems that
support Intel®'s multi-core architecture. The
InsydeH2O™ EFI BIOS was specially designed for
embedded system applications.
Equipped with Intel® components exclusively from the
Intel® Embedded Line, the F19P has a guaranteed
minimum standard availability of 7 years.
The F19P is suited for a wide range of industrial
applications, e.g. for monitoring, vision and control
systems as well as test and measurement. Main target
markets comprise industrial automation, multimedia,
traffic and transportation, aerospace, shipbuilding,
medical engineering and robotics.
The F19P comes with a tailored passive heat sink
within 4 HP height. Regardless, forced air cooling is
always required inside the system. The robust design
of the F19P make the board especially suited for use
in rugged environments with regard to shock and
vibration according to applicable DIN, EN or IEC
industry standards. The F19P is also ready for coating
so that it can be used in humid and dusty environments.
®
F19P Data Sheet - 2010-02-08
Embedded Solutions
Technical Data
CPU
n Intel® Core™ 2 Duo SP9300
o Up to 2.26GHz processor core frequency
o 1066MHz system bus frequency
n Chipset
o Northbridge: Intel® GS45
o Southbridge: Intel® ICH9M-SFF
Memory
n Up to 6MB L2 cache integrated in Core 2 Duo
n Up to 4GB DDR3 SDRAM system memory (8GB when components
available)
o Soldered
o 800/1067MHz memory bus frequency locked to the FSB
frequency
n 16Mbits boot Flash
n Serial EEPROM 2kbits for factory settings
n CompactFlash® card interface
o Via USB
o Type I
o True IDE
o DMA support
n MicroSD card interface
o Via USB
Mass Storage
n CompactFlash®
o Connected via USB
n MicroSD card
o Connected via USB
n Serial ATA (SATA)
o Four channels via rear I/O, one channel via side-card
connector (switchable)
o Transfer rates up to 3Gbit/s
o RAID level 0/1/5/10 support
Graphics
n Integrated in GS45 chipset
o Up to 533 MHz graphics core
o Maximum resolution: 2048 x 1536 pixels
n VGA connector at front panel
n Two SDVO ports available via side-card connector
o Two additional DVI connectors at front panel optional
via side card
o Simultaneous connection of two monitors
I/O
n USB
o Two USB 2.0 ports via Series A connectors at front
panel
o Four USB 2.0 ports via side-card connector
o Four USB 2.0 ports via rear I/O
2
One USB for connection of CompactFlash®/MicroSD or USB
NAND Flash
o UHCI implementation
o Data rates up to 480Mbits/s
Ethernet
o Two 10/100/1000Base-T Ethernet channels at the front
o RJ45 connectors at front panel
o Ethernet controllers are connected by two x1 PCIe®
links from ICH9M
o Onboard LEDs to signal activity status and connection
speed
o One 10/100/1000Base-T Ethernet channel via rear I/O
o Ethernet controller is connected by one x1 PCIe® link
from GS45
High Definition (HD) audio
o Accessible via side-card connector
o
n
n
Front Connections (Standard)
n VGA
n Two USB 2.0 (Series A)
n Two Ethernet (RJ45)
Rear I/O
n Four SATA
n Four USB
n One Gigabit Ethernet
n Four PCI Express® x1 links
n Compatible with PICMG 2.30 CompactPCI® PlusIO
Miscellaneous
n Board controller
n Real-time clock, buffered by a GoldCap or alternatively a
battery (5 years life cycle)
n Watchdog timer
n Temperature measurement
n One user LED
n Reset button
PCI Express®
n Three x1 links to connect local 1000Base-T Ethernet
controllers
o Data rate 250MB/s in each direction (2.5 Gbits/s per
lane)
n One x4 or four x1 links for extension through side-card
connector or rear I/O
o Data rate up to 1GB/s in each direction (2.5 Gbits/s
per lane)
CompactPCI® Bus
n Compliance with CompactPCI® Core Specification PICMG 2.0
R3.0
n System slot
®
F19P Data Sheet - 2010-02-08
Embedded Solutions
Technical Data
n
n
32-bit/33-MHz CompactPCI® bus
V(I/O): +3.3V (+5V tolerant)
Busless Operation
n Board can be supplied with +5V only, all other voltages
are generated on the board
n Backplane connectors used only for power supply
Electrical Specifications
n Supply voltage/power consumption with Celeron® M722
processor:
o +5V (-3%/+5%), 2.2A typ., 2.7A max., if the F19P is
operated with 5V only, the 3.3V voltage can be used to
supply other CompactPCI® boards in the system, maximum
load: 10W
o +3.3V (-3%/+5%), 1.4A (2 Gb Ethernet), 1A (1 Gb
Ethernet)
o +12V (-10%/+10%), approx. 10mA
n Supply voltage/power consumption with SP9300 processor:
o +5V (-3%/+5%), 4.9A typ., 6.4A max., if the F19P is
operated with 5V only, the 3.3V voltage can be used to
supply other CompactPCI® boards in the system, maximum
load: 10W
o +3.3V (-3%/+5%), 1.4A (2 Gb Ethernet), 1A (1 Gb
Ethernet)
o +12V (-10%/+10%), approx. 10mA
MTBF
n tbd @ 40°C according to IEC/TR 62380 (RDF2000)
Safety
n PCB manufactured with a flammability rating of 94V-0 by
UL recognized manufacturers
EMC
n Tested according to EN 55022 (radio disturbance),
IEC1000-4-2 (ESD) and IEC1000-4-4 (burst)
BIOS
n InsydeH2O™ UEFI Framework
Software Support
n Note that 64-bit hardware technology requires 64-bit
operating system support
n Windows® (including Vista)
n Linux
n VxWorks® (in preparation)
n QNX® (on request)
n Intel® Virtualization Technology, allows a platform to
run multiple operating systems and applications in
independent partitions; one computer system can function
as multiple "virtual" systems
n For more information on supported operating system
versions and drivers see Software.
Mechanical Specifications
n Dimensions: conforming to CompactPCI® specification for
3U boards
n Front panel: 4HP with ejector
n Weight: 430g
Environmental Specifications
n Temperature range (operation):
o Depends on system configuration (CPU, hard disk, heat
sink...)
o Maximum: +85°C
o Minimum: -40°C (all processors)
o Conditions: airflow 1.5m/s, typical power dissipation
tbd
n Temperature range (storage): -40..+85°C
n Relative humidity (operation): max. 95% non-condensing
n Relative humidity (storage): max. 95% non-condensing
n Altitude: -300m to + 2,000m
n Shock: 15g/11ms
n Bump: 10g/16ms
n Vibration (sinusoidal): 1g/10..150Hz
n Conformal coating on request
3
®
F19P Data Sheet - 2010-02-08
Embedded Solutions
Diagram
4
®
F19P Data Sheet - 2010-02-08
Embedded Solutions
Configuration & Options
Standard Configurations
Article No.
CPU Type
Clock
System RAM
Cflash/microSD™ Side Card Slot
Operation
Temperature
02F019P00
Celeron® M 722
1.2 GHz
2 GB
0 MB
right
-40..+85°C
02F019P01
SP9300
2.26 GHz
4 GB
0 MB
right
0..+60°C
Options
CPU
n Intel® SP9300, 2.26GHz, 1066MHz FSB, 6MB cache, 25W
n Intel® SL9400, 1.86GHz, 1066MHz FSB, 6MB cache, 17W
n Intel® SU9300, 1.2GHz, 800MHz FSB, 3MB cache, 10W
n Intel® Celeron® M722, 1.2GHz, 800MHz FSB, 1MB cache, 5.5W
n Intel® Celeron® M723, 1.2GHz, 800MHz FSB, 1MB cache, 10W
Memory
n System RAM
o 2GB or 4GB (8GB when components available)
n CompactFlash®
o 0 MB up to maximum available
n MicroSD card
o 0 MB up to maximum available
n NAND Flash instead of CompactFlash®, microSD™ card and
battery
o 0 MB up to maximum available
Graphics
n One or two DVI-D connectors at front via side card
o Simultaneous connection of two monitors
I/O
n Ethernet
o 9-pin D-Sub connector with one or two 10/100Base-T
ports instead of two RJ45 connectors
Mechanical
n Side card can be added at left or right side of CPU
Operation Temperature
n Depends on system configuration (CPU, hard disk, heat
sink...)
n Maximum: +85°C
n Minimum: -40°C (all processors)
Please note that some of these options may only be
available for large volumes. Please ask our sales staff
for more information.
5
®
F19P Data Sheet - 2010-02-08
Embedded Solutions
Ordering Information
Standard Hardware
0751-0040
02F019P00
Intel Celeron M 722, 1.2 GHz, 2 GB DDR3
DRAM, -40..+85°C
CompactFlash card, 1 GB, Type I, fixed bit
set, -40..+85°C
0751-0041
02F019P01
Intel Core 2 Duo SP9300, 2.26 GHz, 4 GB
DDR3 DRAM, 0..+60°C
CompactFlash card, 2 GB, Type I, fixed bit
set, -40..+85°C
0751-0042
CompactFlash card, 4 GB, Type I, fixed bit
set, -40..+85°C
Related Hardware
02F600-00
2 COM extensions and SATA hard disk slot,
for F14 and compatible SBCs, -40..+85°C
screened
02F601-00
1 DVI-D and 1 audio at front, SATA hard
disk slot, for F14 and compatible SBCs,
4HP, 0..+60°C
02F601-02
2 DVI-D, 1 audio, 1 COM (via SA-Adapter) at
front, SATA hard disk slot, for F14 and
compatible SBCs, 8HP, 0..+60°C
02F603-00
3U CompactPCI side card with 2 USB and 1
COM extension, SATA hard disk and
CompactFlash slot, for F14 and compatible
SBCs, mounted to the right of the SBC,
0..+60°C
02F604-00
3U CompactPCI side card with 1 IEEE 1394
FireWire, 1 DVI, 1 HD audio and 1 COM
extension, SATA hard disk slot, for F14 and
compatible SBCs, mounted to the right of
the SBC, 0..+60°C
02F605-00
1 XMC or PMC slot, for F14 and compatible
SBCs, -40..+85°C with qualified components
02F606-00
2 Gigabit Ethernet on Lemo railway
compliant connectors, 1 COM extension
(SA-Adapter not included), SATA hard disk
slot, for F14 and compatible SBCs,
conformally coated, -40...+85°C screened
02F608-00
4 SATA and 2 COM ports, additional SATA
hard disk slot on-board, for F14 and
compatible SBCs, mounted to the right of
the SBC, 0..+60°C
08CT12-00
CompactPCI PlusIO rear transition module
3U/80mm, 2 Ethernet, 4 USB, 4 SATA, 4 PCIe
x1, -40°C..+85°C qualified
Memory
6
0751-0032
CompactFlash card, 8 GB, Type I,
-40..+85°C, fixed bit set
0751-0038
CompactFlash card, 256 MB, Type I,
removable, -40..+85°C
0751-0039
CompactFlash card, 512 MB, Type I,
removable, -40..+85°C
Systems & Card Cages
0701-0046
CompactPCI 19" 4U/24HP desktop system for
3U cards, 3-slot 3U CompactPCI backplane,
system slot right, 1U fan tray with 1 fan,
8 HP space for 1 pluggable PSU
0701-0056
CompactPCI 19" 4U/84HP rack-mount enclosure
for 3U cards (vertical), 4+4-slot 3U
CompactPCI / cPCI Serial hybrid backplane,
prepared for rear I/O, 250W power supply
wide range 90..264VAC on rear, 1U fan tray
with 2 fans included, 0..+60°C
Miscellaneous
0713-0003
CompactPCI 3U 1-slot backplane for
stand-alone operation of F14, F15, F17,
F18, F19P: 32-bit/33-MHz with rear I/O,
3.3V supply, ATX-power, power, JTAG, IPMB
and utility connection, 6x screw connection
M3
08CT12-00
CompactPCI PlusIO rear transition module
3U/80mm, 2 Ethernet, 4 USB, 4 SATA, 4 PCIe
x1, -40°C..+85°C qualified
Software: OS independent
13XM01-06
MDIS5 low-level driver sources (MEN) for
XM1, XM1L, MM1, XM2, F11S and F19P board
controller
Software: Windows
10F014-78
Windows Embedded Standard BSP (MEN) for
F14, F15, F17, F18, F19P, G20, XM1, XM1L,
XM2, MM1, SC21, DC1 and RC1
13T003-70
Windows chipset driver (Intel) for F14,
F15, F17, F18, F18E, F19P, D9, D6, D7,
D601, A19 and A20
13T005-70
Windows USB2UART driver (FTDI) for F14,
F15, F17, F18, F19P, D9, A19, A20, XM2 and
XM50 hosts
®
F19P Data Sheet - 2010-02-08
Embedded Solutions
Ordering Information
13T010-70
Windows network driver (Intel) for XM1,
XM1L, XM2, F11S and F19P
13T019-70
Windows graphics driver (Intel) for XM2 and
F19P
13XM02-77
Windows Installset (MEN) for XM2 and F19P
Software: VxWorks
13Y003-60
VxWorks driver (MEN) for USB-to-UART
bridges on F600, F601, F602, F603, F604,
F606 and D700
Software: Firmware/BIOS
14F019P01
System BIOS for F19P
Documentation
20APPN004
Application Note: How to make a USB stick
bootable
20F019P00
F19P User Manual
20F019PER
F19P Errata
For the most up-to-date ordering information and direct
links to other data sheets and downloads, see the F19P
online data sheet under » www.men.de.
Germany
MEN Mikro Elektronik GmbH
Neuwieder Straße 5-7
90411 Nuremberg
Phone +49-911-99 33 5-0
Fax +49-911-99 33 5-901
E-mail [email protected]
www.men.de
France
MEN Mikro Elektronik SA
18, rue René Cassin
ZA de la Châtelaine
74240 Gaillard
Phone +33 (0) 450-955-312
Fax +33 (0) 450-955-211
E-mail [email protected]
www.men-france.fr
USA
MEN Micro, Inc.
24 North Main Street
Ambler, PA 19002
Phone (215) 542-9575
Fax (215) 542-9577
E-mail [email protected]
www.menmicro.com
The date of issue stated in this data sheet refers to the Technical Data only. Changes in ordering information given herein do not affect the date of issue.
All brand or product names are trademarks or registered trademarks of their respective holders.
Information in this document has been carefully checked and is believed to be accurate as of the date of publication; however, no responsibility is assumed for
inaccuracies. MEN Mikro Elektronik accepts no liability for consequential or incidental damages arising from the use of its products and reserves the right to
make changes on the products herein without notice to improve reliability, function or design. MEN Mikro Elektronik does not assume any liability arising out of
the application or use of the products described in this document.
The products of MEN Mikro Elektronik are not suited for use in nuclear reactors or for application in medical appliances used for therapeutical purposes.
Application of MEN's products in such plants is only possible after the user has precisely specified the operation environment and after MEN Mikro Elektronik
has consequently adapted and released the product.
Copyright © 2010 MEN Mikro Elektronik GmbH. All rights reserved.
7
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement