ADB English

Catalogue produits

Productcatalogus

Product Catalogue

ProduktKatalog www.adblighting.com

Your Partner for Light

Edition March 2014

Lighting Technologies


Projects & Achievements

Controlling

FREEDOM

LIBERTY

IMAGO

HATHOR Rack PC Unit

DOMINO

MIKADO

Networking

Dimming

EURODIM Twin Tech

EURORACK 60 DIMSWITCH

MEMORACK

MIKAPACK

Touring Racks

"A" Range

EUROSPOT

Lighting - Theatre Spotlights

Motorized WARP

WARP

EUROPE

Lighting - Multi-Purpose Luminaires

ALC4-2

Cyclorama Lights ACP 1000

Fill Lights LF/HF 1000

SVOBODA

SOFTLUX

Accessories

Summary

2

50

50

52

54

56

58

30

30

32

36

46

48

18

18

22

24

26

28

8

10

12

14

4

4

6

16

60

1

A wealth of experience in stage and studio lighting, a comprehensive range of high quality products and a strong project management capability are some of the key strengths which have made of ADB the preferred partner of so many Theatre and Television Lighting Professionals around the world.

Bolshoi Theatre Moscow

Russia

Whenever quality and consistant performance count leading venues around the world rely on ADB.

EURODIM installation dimmers power a large array of luminaires every day.

Similar installlation:

Novosibirsk Theatre, Russia,

Theatre of Nations, Russia

Metropolitan Opera New York

The totally silent WARP Motorized profile spotlights are the choice of discerning lighting professionals in many prestigious venues:

Monnaie Opera Brussels, Belgium,

Shen Zen Concert Hall, China,

Bayerische Staatsoper, Munich Germany,

Glyndebourne Festival, United Kingdom

Philharmony Theatre

Strasbourg

In order to save energy 56 x ALC4-2 have been installed for the lighting of the philharmonic orchestra. 6 x

WARP/M motorized profiles for multi position detailed lighting.

Similar cases:

Casino Oostende, Belgium,

Macau Cultural Centre, China,

C-Mine Genk, Belgium

2

BNTV Bulgaria

Refurbishment of existing studio including: repair and redesign of 30 years telescopic elements, design and build of suspension control system and installation of complete lighting system with Control desk, dimmers and TV luminaries.

Palais Montcalm Quebec

The Salle Raoul Jobin concert hall, one of the best in the world, is equipped with

Motorized WARPS.

Similar installlation:

Onasio centre Athens

TV Lighting & Energy Van

Algerian TV

A speciality of our project department is to design and supply custom solutions, such as this lighting van.

Should you have any specific lighting requirement, do not hesitate to

contact our project deparment.


Projects & Achievements

BASTILLE Opera

Paris - France

Replacement of dimmers originally installed for the theatre’s opening in

1989 by newest EURODIM Twin Tech technology.

Many famous opera houses rely on the quality and endurance of ADB digital dimmers, such as:

Teatro alla Scala, Milano,

Bolshoi, Moscow,

Opera Garnier, Paris,

Grand Théâtre de Genève,

Switzerland

English National Opera

(ENO) - London

ADB Lighting has been appointed to supply the English National Opera

(ENO), based at the Coliseum in

London, with a EURODIM Twin Tech dimming system, fitted with dualmode DimSwitch dimmer modules.

Other fine venues:

Concert Haus, Vienna, Austria

Palau de les Arts Reina, Sofia, Spain

Casa di Musica, Porto, Portugal

Oriental Arts Centre, Shanghai, China

Tonhalle, Düsseldorf, Germany

Gewandhaus, Leipzig, Germany

National Theatre of

Bahrain

ADB partner TELMACO has project managed and installed the complete lighting system with Twin Tech

DimSwitch dimmers and luminaires from ADB.

Other references in Asia:

Shanghai Grand Theatre, China

Kimhae Cultural Centre,

Seoul, Art Centre,

Soengnam, Culture Hall, Korea

New National Theatre, Tokyo, Japan

Musiktheater Linz

Austria

The Linz's Theatre is equipped with

EURODIM Twin Tech technology and also with the FREEDOM control desk.

Other venue:

Youth Theatre Zagreb

VRT - TV STUDIO

Brussels Belgium

Professional Broadcasting Studios request 100% reliability and functionality.

Major broadcasters relying on ADB:

National BTV-Minsk, Belarus,

TF1 Paris,

Channel 5, 3, 11 Bangkok, Thailand,

National Television HRT, Croatia,

BBC Studios, United Kingdom,

DIGI24, Bucharest, Romania,

Media Center, Turkmenistan,

NHK, Osaka,

ITV Television, Taiwan

An impressive reference list is available upon request.

3


Controlling

The state of the art lighting and show control tool when more multi-parameter instruments are needed to be controlled and fast access is required. Together with the LIBERTY console this range is ideal for all venues seeking a fully integrated solution to control conventional and moving lights as well as LED sources and other modern equipment in a portable package.

FREEDOM features four additional rotary wheels with pushbutton function and a super smooth large size trackball for precision positioning control. Updated with a new Moving Light library, including over 10000 fixtures, FREEDOM allows users to control quantities of multiple LED fittings, intelligent lights or media servers as well as the standard generic dimming systems.

Four physical DMX outputs and one physical DMX512 input on board with 5 pole standard XLR connection sockets can be used in case no ETHERNET network is available.

Highly intuitive thanks to the graphical user interface and powered by the HATHOR software this desk meets the sophisticated needs of all lighting professional. The lighting control desk philosophy has been specifically designed for theatre stage lighting without any compromise.

FREEDOM is available in five basic configurations controlling channel numbering from 120 to 2048 multi-parameter lighting instruments and can address up to 32 universes via suitable networks. Synchronised backup is optionally available. FREEDOM consoles perform as standalone or as a client consoles in an extended networked system. Networked FREEDOM consoles will support multi-user / multi-operator setups with optional software packages and hence works perfectly together with other control desks powered by HATHOR software.

FREEDOM comes with an SSD disk drive, which makes the console extremely silent and improves the boot-up time.

Playbacks

•

•

•

•

•

•

•

•

1 Grandmaster with Blackout key.

24 physicals Submasters with assign key and Flash key.

Modes: Solo / Inhibit / Focusing / Rubberband &

Auto-execute look.

Loading possibilities: Channels, Groups, Presets,

Looks.

Chasers, Attributes and Palettes.

1 Master Playback 100 mm (Sequential Theatrical

Crossfade).

GO / GO BACK / PAUSE / Jump / SEQ- & SEQ + keys.

1 Intensity / Speed control wheel.

Keypad

•

•

•

•

•

•

•

Status information LCD.

Channel selection: +, -, Thru, +%, -%, At Level, All and Invert commands.

RECORD/UPDATE for Presets, Looks, Groups, and

Palettes with filtered options.

Direct Frame (Gel String Colour) key.

Direct Numeric entry for SEQUENCE Times and

Special.

Times.

Undo key.

Moving Light Controls

•

•

4 rotary Wheels with Pushbutton function.

1 Trackball 50 mm.

Power Requirements

•

•

Power supply cable: CEE22 connector

Power supply: 50/60 Hz, 100 - 240 V, 7 A - 3.5 A

Integrated 10.1" LED Touchscreen

5 Dedicated keys for very quick related content display:

• SEQUENCE

•

•

•

•

SUBMASTERS

CHANNELS

MOVING LIGHTS CONTROL

UNLIMITED USER SCREEN LAYOUTS

4


Memory Control Desks

Code Description Reference

1AM510010000

FREEDOM

- 120 channels

1AM520010000

FREEDOM

- 240 channels

1AM530010000

FREEDOM

- 360 channels

1AM540010000

FREEDOM

- 512 channels

1AM550010000

FREEDOM

- 1024 channels

1AM560010000

FREEDOM

- 2048 channels

FREEDOM/120

FREEDOM/240

FREEDOM/360

FREEDOM/512

FREEDOM/1024

FREEDOM/2048

Basic desk featuring:

• 4 DMX universes on XLR5

• 1 DMX input on XLR5

• 32 DMX addressable universes through Ethernet (depends on deployed protocol)

• Universal power supply 90-264 V, 50-60 Hz

• 1 SVGA and 1DVI (or HDMI) Video Screen output

• 1 Audio input

• 1 Ethernet, on RJ45

• 1 keyboard port

• 2 XLR3 for 12V "gooseneck" desk lamp

Supplied with:

• Alphanumerical keyboard (qwerty/qwertz/azerty... to be specified at order) and mouse

• Power Supply cable

• Dust cover

• Quick Start User Manual and System restore Media

Hardware Options and Accessories

1105.54.120 Additional block of 120 channels

(retrofit for upgrade of 120 and 240 Channel Desks to next group) 120CH/UP/HAT


(retrofit for 512 up to 1024 instruments)

2810.02.050 MIDI – USB adaptor

2870.01.190

2870.01.201

1105.53.475

1105.51.020

1105.51.010

1145.12.400

1145.12.401

22" LCD/TFT monitor

24" LCD/TFT monitor with Multi Touch Integrated

XLR3 "gooseneck" desk lamp

Flight case for FREEDOM consoles

Flight case for 24” Touchscreen Monitor

1AM410010000 Backup for FREEDOM 120






2810.00.110 Wireless Remote Control unit

1AM700000000 24-Subfader Extension

1145.12.402 External Power Supply

Extension 1.50 m cable

Extension cable kit (30 m / non assembled)

512CH/UP/HAT

MIDI/USB

LCD22

LED24/HAT

WORKLITE/XLR3

FLY/F

FLY/M/L

RPU/120

RPU/240

RPU/360

RPU/512

RPU/1024

RPU/2048

WIFI/FULL/HAT

SUB24/EXT/H

EPS/9

DB15/15

DB15/300

5


Controlling

LIBERTY is the spot-on solution for space-challenging environments and all venues seeking a fully integrated solution in a highly compact and portable package with the capacity of much larger and more expensive lighting consoles.

The control desk software (which is common with the FREEDOM console) itself has been developed with the requirements of modern lighting design in mind, including a new Moving Light library, with over 10000 fixtures. The lighting control desk philosophy has been specifically designed for theatre stage lighting without any compromise. As an operator it is easy to advance from a LIBERTY console to other members of the HATHOR software powered lighting control desk family thanks to the highly intuitive operating interface.

The heart of the unit is driven by a dual core processor with multiple graphical screens and running under the recent embedded version of Windows OS. This design offers unrivalled performance and reliability, as well as the flexibility to incorporate the software drivers for the latest peripheral devices. The lighting console exchanges among other protocols with standard ASCII show files. The operator may freely configure the screen layout and tailor the user interface to their personal needs and preferences.

LIBERTY is available in five basic configurations controlling channel numbering from 120 to 1024 multi-parameter lighting instruments and can address up to 16 universes via suitable networks. Synchronised passive backup feature is integrated in the system. LIBERTY consoles perform as standalone or as a backup/client desk in an extended network system. Networked LIBERTY and FREEDOM consoles will support multi-user / multi-operator setups with optional software packages.

LIBERTY comes with an SSD disk drive, which makes the console extremely silent and improves the boot-up time.

Playbacks

•

•

•

•

•

•

•

•

1 Grandmaster with Blackout key.

24 physicals Submasters with assign key and Flash key.

Modes: Solo / Inhibit / Focusing / Rubberband &

Auto-execute look.

Loading possibilities: Channels, Groups, Presets,

Looks.


1 Master Playback 100 mm (Sequential Theatrical

Crossfade).

GO / GO BACK / PAUSE / Jump / SEQ- & SEQ + keys.



• 4 virtual touchscreen sliders located on the central

10.1” LED Touchscreen.

Power Requirements

•

•


Power supply: 50/60 Hz, 100 - 240 V, 7 A - 3.5 A

Keypad

•

•

•

•

•

•

•

Status information LCD.

Channel selection: +, -, Thru, +%, -%, At Level, All and Invert commands.

RECORD/UPDATE for Presets, Looks, Groups, and

Palettes with filtered options.

Direct Frame (Gel String Colour) key.

Direct Numeric entry for SEQUENCE Times and

Special.

Times.

Undo key.

Integrated 10.1" LED Touchscreen

5 Dedicated keys for very quick related content display:

• SEQUENCE

•

•

•

•

SUBMASTERS

CHANNELS

MOVING LIGHTS CONTROL

UNLIMITED USER SCREEN LAYOUTS

6


Memory Control Desks


1AM110010000

LIBERTY

- 120 channels

1AM120010000

LIBERTY

- 240 channels

1AM130010000

LIBERTY

- 360 channels

LIBERTY/120

LIBERTY/240

LIBERTY/360

1AM140010000

LIBERTY

- 512 channels

1AM150010000

LIBERTY

- 1024 channels

Basic desk featuring:

• 2 DMX universes on XLR5

• 16 DMX addressable universes through Ethernet

(depends on deployed protocol)

• Universal power supply 90-264 V, 50-60 Hz

• 1 SVGA and 1DVI (or HDMI) Video Screen output

• 1 Audio input

• 1 Ethernet, on RJ45

• 1 keyboard port

• 1 XLR3 for 12V "gooseneck" desk lamp

LIBERTY/512

LIBERTY/1024

Supplied with:

• Alphanumerical keyboard (qwerty/qwertz/azerty... to be specified at order) and mouse

• Power Supply cable

• Dust cover

• Quick Start User Manual and System restore Media





(retrofit for 512 up to 1024 instruments)


2870.01.190

2870.01.201

1105.53.475

1105.51.000

1105.51.010

2810.00.110

1145.12.402

1145.12.400

1145.12.401

22" LCD/TFT monitor



Flight case for LIBERTY consoles

Flight case for 24” Touchscreen Monitor

1AM410010000 Backup for LIBERTY 120





Wireless Remote Control unit


External Power Supply

Extension 1.50 m cable

Extension cable kit (30 m / non assembled)

512CH/UP/HAT

MIDI/USB

LCD22

LED24/HAT

WORKLITE/XLR3

FLY/L

FLY/M/L

RPU/120

RPU/240

RPU/360

RPU/512

RPU/1024

WIFI/FULL/HAT

SUB24/EXT/H

EPS/9

DB15/15

DB15/300

7


Controlling

Following the success of ADB Lighting’s LIBERTY and FREEDOM control desks, and to add an extra answer to customer's needs,

ADB is expanding its HATHOR-technology based controller family with a brand new USB control surface: IMAGO.

IMAGO adds a compact and lightweight portable control surface to ADB’s intuitive, powerful and state of the art lighting software,

HATHOR.

Designed to answer the requirements of the company’s growing customer base, IMAGO has been designed with cost, size and ergonomics in mind. Based on a keypad, a sequential crossfade and six subfaders, it offers all the essential elements and features of a fully-specified lighting controller, in a very compact format.

Because moving lights are central to most of today’s productions, IMAGO comes with four push wheels and dedicated keys, allowing operators to efficiently control fixture parameters.

Combined with HATHOR lighting software and a simple USB connection between a laptop and the wing, IMAGO offers leadingedge capability, advanced features and enhanced programming, including two DMX outputs and one DMX input (for additional subfaders with any DMX console in the market), as well as the possibility to send 32 universes via Ethernet.

Applications

• Theatre / Opera / Television Studios

• Touring

• Schools and Cabarets

Playbacks

• 6 physicals Subfaders 60 mm with assign key Start key and

Flash button. 6 Executor buttons (Assign key and Start key).

• Modes: Solo / Inhibit / Focusing / Rubberband & Auto- execute look.

• Loading possibilities: Channels, Groups, Presets, Looks,


1 Sequential Theatrical Crossfade.

2 physicals faders 100 mm

- GO / BACK / PAUSE / keys.


Keypad

• Channel selection: +, -, Thru, +%, -%, At Level, All and

Invert commands.

• Direct Numeric entry for SEQUENCE Times and Special

Times.

• RECORD/UPDATE for Presets, Looks, Groups, Palettes with filtered options.

• EDIT key

• FETCH key

Connections

• DMX Out: 2 DMX512 XLR 5 pins female.

• DMX In: 1 DMX512 XLR5 pin male.

• 2 USB Ports A.

• 1 USB Port B.

• 1 Desk Lamp supply.


• 4 rotary Wheels with Pushbutton function.

• 7 Attribute Group/Palette keys.

• COPY ATT key.

• 8 Free assignable keys.

Power Requirements

• External Power supply 12 V 500 mA

Physical Specifications

• Dimensions: 415 x 303 x 85 mm.

• Weigth: 2.65 kg

• Four VESA mount screw-holes on the bottom panel.

• Kensington security slot on the rear panel.

8


USB Control Surfaces


1AM600000000

IMAGO

1AM610000000

IMAGO and HATHOR

- 120 channels

1AM620000000

IMAGO and HATHOR

- 240 channels

1AM630000000

IMAGO and HATHOR

- 360 channels

1AM640000000

IMAGO and HATHOR

- 512 channels

1AM650000000

IMAGO and HATHOR

- 1024 channels

1AM660000000

IMAGO and HATHOR

- 2048 channels

IMAGO is supplied with:

• USB cable

• 12 V power supply

IMAGO

IMAGO/120

IMAGO/240

IMAGO/360

IMAGO/512

IMAGO/1024

IMAGO/2048

IMAGO and HATHOR is supplied with:

• IMAGO control surface, USB cable and power supply

• USB Dongle (HATHOR License authorization)

• USB memory stick

• Quick Start User Manual and DVD

NOTE: THERE IS NO COMPUTER INCLUDED IN THE PRODUCTS

HATHOR Software main features:

Channels

• 120/240/360/512/1024/2048 control channels (multi- parameter lighting instruments) such as LED fixtures, Moving Lights, Video

Servers, Smoke Machines etc… (Retrofit upgrade of channel count possible by optional upgrade kits).

• 1024 DMX outputs on 2 physical XLR5F connectors.

• 32 Universes: 16384 outputs / parameters via Ethernet. Available

Control Protocols: ARTNET, sACN, ART-RDM, Sandnet, Pathport,

Shownet.

Specifications

• 2000 Groups / 15000 Presets (cues) / 1000 Looks.

• 1000 Sequences (Cue Lists) / 24 Playbacks.

• 1000 Chasers.

• 1000 Effect Templates.

• 100 Dimmer Curves / 1000 Gel strings.

• 14000 Palettes (2000 palettes/attribute group).

• 7 basic Attribute Groups.

• 100 instruments Layouts (topographic view of Channels ).

• 192 virtual Submasters (assignable in banks to physical faders).

• 1000 Submasters Pages.

• Virtuality unlimited screen’s user layouts

(stored to hard drive of control desk).

• 100 panels.





(retrofit for 512, 1024 up to 2048 multi-parameter instruments)

2870.01.190 22" LCD/TFT monitor

2870.01.201

1105.53.476

2810.02.050



MIDI – USB adaptor

MIDI cable

2810.00.080 USB memory stick

LAPTOP computer

1105.51.010 Flight case for 24” Touchscreen Monitor

512CH/UP/HAT

LCD22

LED24/HAT

WORKLITE/XLR3/IMAGO

MIDI/USB

C.MIDI/M

FLASHMEM

LAPTOP/HAT

FLY/M/L


9

Controlling

HATHOR Rack PC Unit

….The ideal compagnon for LIBERTY or FREEDOM

RPU Software Features

New member of the HATHOR family the Rack PC Unit has been designed to be used either as backup with a LIBERTY or a

FREEDOM, or as a stand-alone playback unit, in an architectural or themed spaces, context. This new compact 4U 19” housing solution can be easily integrated in control rooms and technical rooms.

Simply connect the RPU on your network, start your desk as “Master Ltd”, then start your RPU as “Backup Ltd”. The RPU will be

100% synchronised with the “Master” desk, following each step. Synchronised but not “active”, this safety system avoids wrong uses. Anyway, when the “Master” fails, the RPU becomes “Master” and can be operated by using the keyboard and the mouse, an external Touch Screen, an X-Keys device or the 24 Subfader extension.

The heart of the unit is driven by a dual core processor suporting multiple graphical screens and running under the newest embedded version of Windows OS. This design offers unrivalled performance and reliability, as well as the flexibility to incorporate the software drivers for the latest peripheral devices. The operator may freely configure the screen layout and tailor the user interface to his personal needs and preferences.

The Rack PC Unit is available in six basic configurations controlling channel numbering from 120 to 2048 multi-parameter lighting instruments and can address up to 32 universes via suitable networks. The synchronised passive backup feature is integrated in the system.

APPLICATIOnS

Theatre, architectural / museums, television, touring and rental, houses of worship, exhibitions, industrial event shows, cruise ships.

COnTROL CHAnnELS

120/240/360/512/1024/2048 multi-parameter lighting instruments,

LED fixtures, Moving Lights, Video Servers, Smoke Machines etc… (Retrofit upgrade of channel count possible by optional upgrade kits).

AVAILABLE COnTROL PROTOCOLS

ART-NET, Sandnet, Pathport, sACN, Shownet, SA Net, ETC

Net2 and ART-RDM. A C N E1.31 ready.

• 7 basic Palette Attribute Groups as: Focus, Color, Beam,

Pattern, Extra, All, Dynamics.

• Reference Palettes and No reference Palettes.

• Palettes fully editable.

• Tracking mode for fixture’s parameters with history background, editing and clean-up functions.

• Extensive Factory Template Library as well as user definable templates with 16 bit resolution for any parameter and intensities. Complete Template builder included, with direct access and live template modifications and check.

• Copy Attributes command to copy parameter’s data from one luminaire to others of the same type.

• Fetch command to copy intensity and parameter’s data from one cue in the list to stage for a selection of channels.

• Replace Fixture function to exchange one device for another one of different type.

• Play (show) browser allowing offline browsing and editing of shows not currently loaded.

OPERATIOnAL FEATURES

• Graphical User interface with topographical views.

• Track Window allows editing of cues via Editor for parameters and intensities and tracking of all referenced objects such as Presets, Palettes, Groups and recorded

Fader movements over the whole show.

• Drag’n drop facilities to copy/paste or move steps (cues) in the sequence.

• Each step (cue) can be edited Live or Blind, channel by channel and parameter by parameter, for values and crossfade times.

SCREEnS LAYOUTS

• Infinite possibilities to organize screens.

• Four sub-screens per monitor.

• Multiple windows per sub-screen.

• STORE and LOAD functions (User Layouts).

• Individual dynamic zoom of all editors and browsers.

10


RPU


1AM410010000

1AM420010000

1AM430010000

1AM440010000

1AM450010000

1AM460010000

RPU

- 120 channels

RPU

- 240 channels

RPU

- 360 channels

RPU

- 512 channels

RPU

- 1024 channels

RPU

- 2048 channels

RPU/120

RPU/240

RPU/360

RPU/512

RPU/1024

RPU/2048

Supplied with:

• Alphanumerical keyboard

(qwerty/qwertz/azerty... to be specified at order) and mouse,

• Supply cable,

• Quick Start user manual and system restore DVD.


For Channel upgrades please contact your ADB distribution Partner

2870.01.190 22" TFT monitor

2870.01.201 24" TFT monitor with Multi Touch Integrated


MIDI cable C.MIDI/M


Flight case for RPU

1105.51.010 Flight case for 24” Touchscreen Monitor


1145.12.402 External Power Supply

1145.12.400 Extension 1.50 m cable

1145.12.401 Extension cable kit (30 m / non assembled)

LCD22

LED24/HAT

MIDI/USB

FLASHMEM

FLY/RPU

FLY/M/L

SUB24/EXT/H

EPS/9

DB15/15

DB15/300

RPU HARDwARE FEATURES

External Touchscreen

Up to two Standard Multi-touch Screens can be connected to the

Rack PC Unit.

USB Devices

External USB devices such as X-Keys computer keypads and controllers are compatibles. Create a custom controller for your application with just the right layout and keys positioned exactly where you want them.

Physical Specifications

Dimensions (mm): 427 x 560 x 175

Weight Console (kg): 5

Operating temperature range: from + 5 °C – + 35 °C

Humidity: relative humidity not more than 95 % non-condensing.

Power Requirements


Power supply: 50/60 Hz 100-240 V 7A-3.5 A

Physical InPUT/Output Connections

2 DMX512 XLR 5 pins female

1 ETHERNET RJ45

1 D-Sub connector – 8 external lines for remote triggering.

6 USB PORTS

2 USB located on front panel

1 AUDIO In XLR 3 pins female

1 DVI video connector

1 VGA video connector

1 PS2

427 mm

175 mm


11

Controlling

DOMInO/XT 48/96

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Main Features:

• 48 faders in 2-preset mode or 96 faders in extended mode on DOMINO/XT/96 - 24/48 faders on DOMINO/XT/48.

48 faders configurable as channels, submasters or playbacks on DOMINO/XT/96 - 24 faders on DOMINO/XT/48.

18 dedicated faders configurable in 9 pages as submasters or playbacks.

4 preset masters-A preset, B preset, C preset and grab.

Theatrical dipless crossfade with 2 general masters, stage and preset, and dedicated buttons.

Up to 594 memories on DOMINO/XT/96 - 378 on DOMINO/XT/48.

Individual In (Up) and Out (Down) fade times.

Up to 66 playbacks/chasers on DOMINO/XT/96 can be played simultaneously - 43 on DOMINO/XT/48.

Fully proportional softpatch to 1024 dimmers.

2-preset, extended & memory modes, each fader with flash button.

LED display showing status information via scrolling messages.

Up to 250 steps of a chaser can be recorded as channels, or Memories/Snapshots.

1 SVGA output for displaying texts, memories, patch and help menus in multiple languages.

1 USB connector for show recording.

MIDI IN/OUT connector (optional for DOMINO/XT/48 & 96).

Moving light control module (optional on DOMINO/XT/48 and DOMINO/XT/96) and featuring:

-

-

-

-

-

-

Powerful effects engine and automatic fanning of fixtures.

Extensive fixture library with Web updates.

Comprehensive controls for filters, palettes, presets, cloning, groups,storing, lock home, etc.

6 touch pad displayers (virtual wheels) for parameter control.

DOMINO/XT/48/M: 36 groups, 96 presets, 96 pallets and 378 effects.

DOMINO/XT/96/M: 36 groups, 192 presets, 192 pallets and 594 effects.

2 DMX512/1990 output on XLR-5F connector.

90-260 V, 47/63Hz power supply with automatic detection.

DOMInO 24

/

48

•

•

•

•

•

•

•

•

•

•

•

•

•

Main Features:

• 24 faders in 2-preset mode or 48 faders in extended mode on DOMINO 48 - 12/24 faders on DOMINO 24.

24 faders configurable as channels, submasters or playbacks on DOMINO 48 - 12 faders on DOMINO 24.

3 preset masters: A preset, B preset and grab.

Theatrical dipless crossfade with 2 general masters, stage and preset, and dedicated buttons.

Up to 216 memories on DOMINO 48 - 108 on DOMINO 24.

Individual In (Up) and Out (Down) fade times.

Up to 25 playbacks/chasers on DOMINO 48 can be played simultaneously - 13 on DOMINO 24.

Fully proportional softpatch to 512 dimmers.

2-preset, extended & memory modes, each fader with flash button.

LED display showing status information via scrolling messages.

Up to 250 steps of a chaser can be recorded as channels, or Memories/Snapshots.

On DOMINO 24 U & 48 U as standard, and on DOMINO 24 & 48 as retrofit option:

-

-

1 SVGA output for displaying memories, patch, texts and help menus in multiple languages

1 USB connector for show recording

- MIDI IN/OUT connector.

1 DMX512/1990 output on XLR-5F connector.

90-260 V, 47/63Hz power supply with automatic detection.

12


Manual and Memory Control Desks


5023.10.230

5023.10.235

5023.10.240

5023.10.245

DOMInO/XT/48

- 48 channels - 1024 DMX addresses

- 1 SVGA output

DOMInO/XT/48/M


DOMINO/XT/48

- 1 SVGA output - Motion control module DOMINO/XT/48M

DOMInO/XT/96


- 1 SVGA output DOMINO/XT/96

DOMInO/XT/96/M


- 1 SVGA output - Motion control module DOMINO/XT/96M

Supplied with: power supply cable with CEE 7-7 plug

Option

5023.20.053

• Moving light control module

(for retrofit on DOMINO/XT/48 and DOMINO/XT/96), featuring:

- Powerful effects engine and automatic fanning of fixtures.

- Extensive fixture library with Web updates.

- Comprehensive controls for filters, palettes, presets, cloning, groups, storing, lock home, etc.

- 6 touch pad displayers (virtual wheels) for parameter control.

- Module added on DOMINO/XT/96: 36 groups, 96 presets,

96 pallets and 378 effects.

- Module added on DOMINO/XT/96: 36 groups, 192 presets,

192 pallets and 594 effects.

MC/DOM/XT

Accessories


1105.53.475 XLR3 "gooseneck" desk lamp

1001.30.062 Dust cover for DOMINO/XT/48

1001.30.063 Dust cover for DOMINO/XT/96

5023.20.140 Flight case for DOMINO/XT/48

5023.20.150 Flight case for DOMINO/XT/96

Dimensions

DOMINO 48 XT: 734 x 535 x 144 mm - Net weight: 15.5 kg

DOMINO 96 XT: 974 x 535 x 144 mm - Net weight: 26.0 kg

FLASHMEM

WORKLITE/XL3

DC/DOM/XT/48

DC/DOM/XT/96

FLY/DOM/XT/48

FLY/DOM/XT/96

5023.10.210

5023.10.215

5023.10.220

5023.10.225

DOMInO 24

- 24 channels - 512 DMX addresses DOMINO/24

DOMInO 24 U

- 24 channels - 512 DMX addresses + USB option DOMINO/24U

DOMInO 48

- 48 channels - 512 DMX addresses DOMINO/48

DOMInO 48 U

- 48 channels - 512 DMX addresses + USB option DOMINO/48U


Option

5023.20.034 USB option for retrofitting on DOMINO 24 & 48 and providing:

- 1 SVGA output for displaying memories, patch, texts and

USB/DOM help menus in multiple languages

- 1 USB connector for show recording

- MIDI IN/OUT connector.

Accessories


1105.53.475 XLR3 "gooseneck" desk lamp

1001.30.060 Dust cover for DOMINO 24

1001.30.061 Dust cover for DOMINO 48

5023.20.120 Flight case for DOMINO 24

5023.20.130 Flight case for DOMINO 48

Dimensions

DOMINO 24: 464 x 367 x 115 mm - Net weight: 7.5 kg

DOMINO 48: 684 x 367 x 115 mm - Net weight: 10.5 kg

FLASHMEM

WORKLITE/XL3

DC/DOM24

DC/DOM48

FLY/DOM24

FLY/DOM48


13

Controlling

MIKADO 12/24

•

•

•

•

•

•

•

•

•

•

•

•

Main Features:

• 12 faders in 2-preset mode or 24 faders in extended mode, each with flash button and LED indicator.

3 pages of memories with 12 submaster faders per page = 36 memories.

A submaster can be either a memory or a chaser and up to 13 memories/ chasers can run simultaneously.

3 preset masters – A preset, B preset and grab.

Add/Solo button with flash level master.

Edit and preview of stored memories with channel level indicators.

Manual and automatic dipless crossfade.

Speed control of chasers.

Chaser effects including Start/Stop/Step, random, bounce, single shot, forward/reverse direction, delete/add steps.

Audio input with bass effect for chasers and audio level adjustment.

External line input on 1/4” mono jack for remote control of chasers.

1DMX512/1990 output on XLR-5F connector.

Internal power supply unit, input 230 V +/- 10% - 50/60 Hz.

14


Manual and Memory Control Desks

Code Description

5023.10.200

MIKADO

Reference

MIKADO


Accessories

5023.20.033 19" rack mount brackets KIT/FIX/MIK/19

5023.20.032 External memory module, allowing recording of up to 4 show data MEM/EXT/MIK

Dimensions

MIKADO: 438 x 346 x 104 mm - Net weight: 5 kg

15


Networking

FREEDOM and LIBERTY control desks are ideal to work in a network configuration and may perform as stand alone or as backup/client desks in an extended network system. A synchronised passive back-up feature is always integrated as standard in the system. Beyond that, networked LIBERTY and FREEDOM consoles support multi-user / multi-operator setups with either one of two optional software packages. One is designed for Networks with two desks (DUO) and another (MULTI) for networks with multiple desks. The lighting show information is completely updated instantaneously on line and different lighting desks operators can edit, run and manipulate a show all at the same time. This is a very powerful feature when large lighting installations have to be programmed swiftly and one operator would not be able to control all devices at the same time.

Above is an example of three desks working in Multi-User mode with some peripheral equipment connected to the system. Below are only some typical network products listed in this catalogue. Should you be interested in other configurations please contact our ADB Project Specialists who will advise on the most suitable solution for your own application.

SPLITTER

DMX512-A 2.10 Hub (DMX/SPLIT)

Distribute up to 2 DMX lines to 10 outputs. Bidirectional fully isolated RDM / DMX splitter, booster. 2 Input zones and 10 selectable outputs. All in 1 unit 19" rack space.

SwITCH

Ethernet Industrial Switch

The Switch is a Gigabit Ethernet switch designed to cope with the most demanding lighting and AV installations, including

Multicast transmissions. Managed through a web interface, the device offers a user friendly experience with an industry specific oriented interface. It comes with a built-in redundancy system enabled on the fiber ports, providing a reliable and easy-to-setup backbone for your network.

nODE

Ethernet-DMX2 (nODE / 19)

2 port DMX <-> Artnet node in a 19", 1 unit metal enclosure.

Ideal for touring.

DMX Input and/or output.

Merging / backup / patching / routing.

Accessories and Software

When installing network systems, great care must be taken to the quality of cabling and connectors. If you are in doubt please contact

ADB projects department for more information on the design of your project. We also recommend planning on-site commissioning by factory trained service technician.

Our partner LUMINEX offers, via its website, free of charge software tools to monitor and control lighting networks, and we recommend downloading from www.luminex.be

16



networking options for FREEDOM / LIBERTY desks

1105.51.100 Networking System Tracking Backup & active client for 2 Desks (DUO) NET/DUO/HAT

1105.51.105 Networking Software Full Synchro for multiple Desks (MULTI) NET/MULTI/HAT

If advanced Networking options are required one of the networking software licences must be procured per installation. For further information please contact your nearest ADB distribution partner or ADB directly.

1105.30.260

DMX512 Splitter - DMX512-A 2.10 Hub

Connections:

• 2 DMX512-A in/outputs on 5 pin male XLR, with termination

(RDM compliant)

• 10 DMX512-A in/outputs on 5 pin female XLR, with termination

(RDM compliant)

• Fixed mains lead (90-260 VAC, 47-63 Hz) 2 DMX512-A in/out

puts on 5 pin male XLR on the back panel

(identical to the 2 zone inputs on the front end)

DMX/SPLIT

Standard Ethernet Switch

1105.30.250 16 ports Ethernet Switch

Main features:

• Intelligent Fast Ethernet Switch

• 19", 1 U metal housing

• 10/100 Mbit

• Internal power supply



Main features:

• 19", 1U metal housing

• Stackable: 2 dedicated high-speed stacking ports providing

10 Gbps of bandwidth

• 4 SFP ports

• VLAN management

• IGMP snooping

NET/SWITCH/16P

NET/SWITCH/24

NET/SWITCH/48

Industrial Ethernet Switch


Main features:

• 19", 1U metal housing

• 10/100/1000 Mbit

• 12 shielded Neutrik Ethercon connectors

• IGMP snooping

Connections:

12 x 10/100/1000Mbps Ethernet connections on Neutrik Ethercon connector (10 on the front , 2 at the rear).

2 x SFP cages (Accept 100/1000Mbps compliant mini GBIC transceiver).

Features:

Wire-speed Layer 2 Switching

Industry specific web interface

RLinkX: activate redundancy on ports to create secured links

Options:

PoE supply unit: deliver up to 100 W through the 10 front Ethercon connectors, Backup PSU, Backup PoE supply unit, Group Licence,

MultiLinkx Licence

NET/SWITCH/12

5000.34.500

network node - 19” Ethernet Converter node

NODE/19

Main features :

• Ethernet/Art-Net node for converting Art-Net into DMX512-A, or DMX512-A into ArtNet.

• 2 outlets, compatible with DMX512-A, can be used as input or output

Supplied with: power cable with plug

Networking

17


Dimming

•

•

•

One standard cabinet. No specific configuration of module places required. The cabinet fits all applications. Even if the final dimmer circuit layout has not been yet defined when you have to start installation, you can already order your cabinets. The system is future proof. You can "add-on" more circuits later. Just order additional dimmer modules, put them in the cabinet, and plug and play!

•

•

•

The EURODIM Twin Tech Cabinet features:

•

•

•

2 identical control electronics/power supply slots

32 power module slots for up to 128 channels

Busbar with 32 HRC fuses for individual module protection

•

Optimized airflow system separated from all cabling

Output terminals for 10 mm 2 wiring

(for other cable dimensions, contact ADB)

I/O card with individual DMX and Ethernet connection

(ArtNet, sACN, RDM) per Control Processor

Local touch screen human interface for configuration

Absolutely free mixing of various module types in the same

•

•

•

• cabinet:

• Thyristor modules with min. 400 µs or 200 µs rise time

DimSwitch modules

True sine wave modules

Fluo modules with additional preheat function

Direct feed-through (non-dim) modules with MCB protection

•

•

Blank modules

Electrical protection compliant with the highest international regulations:

•

•

•

Standard MCB 1P+N protection per circuit

Economical RCD per module protection

RCD per circuit protection meets highest safety standards

Simple and efficient configuration per dimmer circuit

5 control inputs (2 x DMX512/3 x ArtNet-sACN) with priority level and priority rule

10 different dimmer laws available (6 user- configurable)

Response time

Preheat function

Advanced Interface and Control Features:

•

•

•

80 cues + 1 priority cue for individual programming

Individual failure rule per circuit in case of data loss

(hold, fade to black or fade to cue)

System wide configuration and diagnostic status reporting with network PC

State-of-the-Art Diagnostic and Reporting

The sequential diagnostics is a pre-show test routine for

•

•

Functions

Dimmer reporting, diagnostics and management are available either on the local user interface of the dimmer cabinet, via our optional ADB dimmer management software: TT Manager, or through RDM over ArtNet.

TT Manager and HATHOR lighting software allow for comfortable and easy system wide configuration and diagnostic status reporting with a networked PC running on a Windows Operating System or within LIBERTY and

FREEDOM, (OS and suitable PC are not supplied by ADB).

Cabinet status with:

•

•

Up to 300 LED indicators for status information of power supply and data

Clear text messages on human interface indicating e.g. missing supply phase, loss of control signals,

CPU failure, fan failure, ambient over temperature

Sequential diagnostics (optional hardware to be separately ordered-TT Manager only) circuit statuts reporting and is available with all standard modules.

•

•

Value of dimmer load (kW)

Deviation from a reference load

No load and overload warning

Short circuit

Full diagnostic modules (optional, exclusively with suitable

•

•

• full diagnostic modules)

• Dimmer protection tripped warning

Overload and no-load warning

Thyristor defect warning

Load changes and comparison with stored reference value (TT Manager only)

18


Hybrid Dimming System

with plug-in thyristor and/or sine wave modules


1DY422000000

Universal cabinet

• Power supply:

- Star 3 NPE 400 (TN-S), 198 V to 264 V, 50/60 Hz.

- Rated current 600 A

- Individual module protection by an HRC supply fuse (50kA)

63A

- Set of 4 Lifting eye bolts included

• Central electronics :

- Two slots for hosting 2 TT control units (CTRL) or 1 TT control unit (CTRL) + 1 backup power supply unit (PSU)

• Control signals:

- I/O board with:

- 4 DMX IN/THROUGH on screw terminals and RJ45 connector

- 2 Ethernet on RJ45 connector

- Remote CPU selection on screw terminals

• Space for up to 32 plug-in dimmer modules

- 4 x 3 kW thyristors; up to 128 x 3 kW per cabinet

- 4 x 2.5 kW sine wave; up to 128 x 2.5 kW per cabinet

- 3 x 5 kW thyristors; up to 96 x 5 kW per cabinet

- 3 x 5 kW sine wave; up to 96 x 5 kW per cabinet

- 1 x 10 kW upon request

- Free mix of sine wave, thyristor and DimSwitch modules

- Free mix of different dimmer ratings

• User-friendly human interface with backlit LCD touch-screen,

10 hard keys and control wheel

• Separate compartments for power supply and output cabling with easy front access.

TTD/CAB/32

1115.10.100

Plug-in central control electronics

• LED indicators for power supply phases, data input and alarm messages.

• 5 control inputs with free DMX addressing (patch) and flexible merge rules per dimmer.

• Protocols: DMX512-A, Art-Net (Art-DMX), ACN and RDM ready.

• Internal power supply.

• Software functions described in the datasheet.

TTD/CPU

1115.10.110

Plug-in back-up power supply unit

Mandatory in combination with single TT control unit.

Options

1115.10.055 Human interface unit (mandatory)

(must be ordered separatly for each TTD cabinet)

1113.33.010 Power module lock

1113.33.020 Cabinet junction plate (set of 2)

1113.33.030 Sequential Diagnostics kit (optional hardware kit)

1109.00.140 TT Management software (optional software)

1113.33.040 Noise reduction for TTD cabinet

Dimensions

EURODIM Twin Tech: 1999 x 990 x 596 mm - Net weight: 229 kg

Net weight plug-in modules: 12 kg +/- 10% depending on module type

TTD/PSU

TTD/IHM

TTD/CAB/LOCK

TTD/CAB/JP

TTD/SEQD

TTD/DM/SOFT

TTD/CAB/NR

19


Dimming

Code Description

Sine Wave Dimmer Modules

4 x 2.5 kW module with full diagnostic

1120.26.634 MCB/1P+N +RCD (30mA) protection per dimmer

3 x 5 kW module with full diagnostic

1120.26.672 MCB/1P+N + RCD (30mA) protection per dimmer

Reference

TTD/SD4 x 2.5/MN/4R

TTD/SD3 x 5/MN/3R

DimSwitch Thyristor Modules with 400 µs Rise Time in Dim Mode

1125.27.050

4 x 3 kW DimSwitch module with full diagnostic

MCB/1P+N protection per dimmer TTD/HD4 x 3/MN/GE

1125.27.060 MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/HD4 x 3/MN/1R/GE

1125.27.020 MCB/1P+N + RCD (30mA) protection per dimmer TTD/HD4 x 3/MN/4R/GE

1125.27.070


MCB/1P+N protection per dimmer

1125.27.080 MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/HD3 x 5/MN/1R/GE


TTD/HD3 x 5/MN/GE

TTD/HD3 x 5/MN/3R/GE


1125.27.040 MCB/1P+N + RCD (30mA) protection per dimmer TTD/HD1 x 10/MN/1R/GE

1125.27.250

4 x 3 kW DimSwitch module with standard diagnostic


1125.27.260 MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/H4 x 3/MN/1R/GE


TTD/H4 x 3/MN/GE

TTD/H4 x 3/MN/4R/GE

1125.27.270



1125.27.280 MCB/1P+N protection per dimmer + (30mA) per DimSwitch module TTD/H3 x 5/MN/1R/GE


TTD/H3 x 5/MN/GE

TTD/H3 x 5/MN/3R/GE


1125.27.240 MCB/1P+N + RCD (30mA) protection TTD/H1 x 10/MN/1R/GE

DimSwitch Thyristor Modules with 200 µs Rise Time in Dim Mode

1125.26.304

1125.26.344



MCB/1P+N + RCD (30mA) protection per dimmer

TTD/RD4 x 3/MN/GE

1125.26.324 MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/RD4 x 3/MN/1R/GE

TTD/RD4 x 3/MN/4R/GE

1125.26.354



1125.26.376 MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/RD3 x 5/MN/1R/GE


TTD/RD3 x 5/MN/GE

TTD/RD3 x 5/MN/3R/GE

1125.26.004



1125.26.024 MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/R4 x 3/MN/1R/GE


TTD/R4 x 3/MN/GE

TTD/R4 x 3/MN/4R/GE

1125.26.054



1125.26.076 MCB/1P+N protection per dimmer + RCD (30mA) per DimSwitch module TTD/R3 x 5/MN/1R/GE


TTD/R3 x 5/MN/GE

TTD/R3 x 5/MN/3R/GE

20


Plug-in Digital Dimmer Modules

Code Description

Thyristor Dimmer Modules for Fluorescent

Lamps with 200 µs Rise Time

2 x 3 kW module with full diagnostic


2 x 3 kW module with standard diagnostic


Direct Feed-through (non-dim) Modules with no Remote Control





Accessories

1120.26.291 Blank panel for 1 slot

1120.26.292 Blank panel for 8 slots

Reference

TTD/FD2 x 3/MN/2R/GE

TTD/F2 x 3/MN/2R/GE

TTD/N4 x 3/MN/4R/GE

TTD/N3 x 5/MN/3R/GE

TTD/TB

TTD/TB/8

DimSwitch Module


The DimSwitch feature, a lot of benefits:

• Each dimmer circuit shall be capable to be set as a "dimmer" for generic lighting or to be set as a "Solid State Relay".

• Solid State Relay mode allows to connect any other load such as HMI ballast or DMX instrument such as LED fixtures, Fluorescent lights, moving heads.

• No minimum load required.

DimSwitch function allows saving in the electrical wiring and to have only ONE identified electrical distribution network for all Dimmed and Switched circuits.

Whom are ALL controlled with the DMX512.

21

Dimming

EURORACk 60

DIMSWITCH

EURORACk 60 DIMSWITCH

High Performance Thyristor Dimmer Racks for Professional Applications, including DimSwitch function

Standard configurations:

•

•

24 x 3 kW

12 x 5 kW

Designed for professional applications in stage, TV studio and architectural lighting, whenever high performance, flexibility and reliability are the prime considerations, the new EURORACK 60 DIMSWITCH offers not only the dimming of generic lighting, but also the electronic switching of any special load such as HMI ballasts or electronic equipment. A choice of various RCD ground fault detection systems is available to comply with various safety standards.

The versatility of ADB wall mount dimmers makes them suitable for virtually any venue - from schools and churches, to theatres, clubs and even larger professional venues, whenever a permanent lighting system is required.

Wall mount dimmers with their local memories, provide also an integrated solution for architectural applications such as conference rooms, reception areas, exterior lighting, sound-and-light shows. Local memories and DMX control can be combined, so that a EURORACK 60 DIMSWITCH can be shared between the stage and the foyer, or the houselights.

Set-up and User Interface Functionality

•

•

•

•

•

•

5-key keypad, 12-character LED display and user-friendly scrolling menu for easy access to all dimmer functions.

Menu with different levels of access for different levels of users, protected against tampering.

10 user-selectable dimmer laws: linear r.m.s voltage, linear r.m.s to 120 V, TV laws (BBC, TV1, TV2), DimSwitch, fluorescent, linear r.m.s voltage with preheating, square law.

Voltage reduction factor for extended lamp life or variable load cable length compensation.

Professional grade filtering (200 µs rise time).

4000-step fade resolution, for noticeably smoother fades.

•

•

•

•

•

•

Global or individual programming of dimmer law, patching, voltage reduction factor and smoothing.

Creation and storage of 20 lighting cues (19 + Priority) each with fade and wait times, for back-up cues, architectural lighting, or stand-alone operation.

Memories set by recording DMX levels or via the menu.

After loss of DMX data: maintain last levels, or wait and fade to a memory or wait and fade to black.

All programmed data saved for unlimited time.

New DimSwitch technology, allowing control of circuit function: either dimming or real Solid State Relay, with all the advantages of electronic switching.

22


Wall Mount Dimmer Racks

Code Description

EURORACk 60 DIMSWITCH

High performance thyristor dimming with 200 µs rise time

1DF602100002 24 x 3 kW - MCB/1P+N

1DF702100002 12 x 5 kW - MCB/1P+N

Dimensions

EURORACK 60 DIMSWITCH: 1022 x 555 x 132 mm

Net weight: 43 kg

Options

RCD - 30 mA (1P+N)

Supply protection per group of 30 kW (12 x 3 kW or 6 x 5 kW)

Required quantity: 2 per EURORACK 60 DIMSWITCH

RCD+MCB/1P+N-30mA - 6kA per dimmer

- for 24 x 3 kW dimmers

- for 12 x 5 kW dimmers

Main isolator switch 4P - 100 A

Reference

ERACK 60/243MN/GE/DS

ERACK 60/125MN/GE/DS

RCD30/ERACK

RCD+MCB/243

RCD+MCB/125

INP.SWITCH/ERACK

Analogue input interface for architectural applications

Star/Delta power supply upon request

Accessories

KIT/ANA/24

1113.31.400 Stand-off brackets for 10 cm trunking space behind the rack (kit) ARC/ERACK

1113.99.120 Dual DMX input retrofit kit (CPU board with data cables)

1113.32.300 Cable entry panel with 27 universal entry seals and a steel PG31

KIT/2DMX/ERACK cable gland + additional cable support rails (supplied as retrofit kit) PANN.PG/ERACK


The DimSwitch feature, a lot of benefits:

• Each dimmer circuit shall be capable to be set as a "dimmer" for generic lighting or to be set as a "Solid State Relay".

• Solid State Relay mode allows to connect any other load such as HMI ballast or DMX instrument such as LED fixtures, Fluorescent lights, moving heads.

• No minimum load required.

DimSwitch function allows saving in the electrical wiring and to have only ONE identified electrical distribution network for all Dimmed and Switched circuits.

Whom are ALL controlled with the DMX512.

23

Dimming

MEMORACk

MEMORACk 30 - 19" Rack Mount Dimmer unit 30 kW

Intelligent, all-digital dimmer racks for 19" rack mounting in two configurations; 12 x 3 kW or 6 x 5 kW.

The dimmers are suitable for continuous duty (3 kW or 5 kW per channel) at 35° C up to 30 kW.

MEMORACk 15 - 19" Rack Mount Dimmer unit 15 kW

Intelligent, all-digital dimmer racks for 19" rack mounting in two configurations: 6 x 3 kW or 3 x 5 kW.

The dimmers are suitable for continuous duty (3 kW or 5 kW per channel) at 35° C up to 15 kW.

This Rack & Pack Mount Dimmer is designed for professional applications in stage, TV studio and architectural lighting, whenever high performance, quality, endurance and reliability are the prime considerations. Ideal for touring, decentralised dimming or extension of existing installations. They are available with lockable standard Harting, socapex, or Cebec, Schuko or CEE compatible sockets.

This dimmer feature professional grade filtering of 200 µs for efficient attenuation of lamp filament noise. The circuitry is protected against accidental 400 V wiring. Hard fired thyristors are used exclusively for control of tungsten halogen lamps, resistive and inductive loads as well as transformer-fed low voltage lamps, and fluorescent lighting with suitable ballast.

Low noise fans provide effective cooling and are fitted with automatic fan-stop. Over-temperature protection through gradual dimmer fade out.

This dimmer is designed for a power supply 230V/400V Star 3NPE (TN-S Net), 50/60Hz. Each dimmer circuit is protected individually by a 1 Pole + Neutral disconnect Magnetic Circuit Breaker (MCB). The dimmers are suitable for continuous duty

(3 kW or 5 kW per channel) at 35° C up to 15 or 30 kW. The dimmers are controlled by a standard DMX512/1990 signal on front mounted XLR-5 male connector and a XLR-5 female connector for signal feed through.

Programming and Set-up Functions

• 5-key keypad, 12 character LED display and user friendly menu for easy access to all dimmer functions.

• Set-up functions can be limited to "DMX start address".

• Local controls for creation and storage of 20 lighting cues.

• Individual selection of dimmer address (patch), law, smoothing and voltage reduction factor.

• Fade smoothing (4000-step resolution).

• 10 dimmer laws (one is user-programmable).

• Professional grade filtering (200 µs rise time).

• Local status reporting: 400 V - overtemperature - fan failure - processor check - presence of DMX signal - DMX and analogue control levels.

• Local test of a dimmer (steady, flash or chaser).

• Automatic self-test capability.

• Programmable response to a DMX failure.

24


Intelligent Dimmer Packs for Professional Applications


MEMORACk 30

1DA16D100004 12 x 3 kW - MCB/1P+N - 2 x HARTING HAN16E out

1DA162100004 12 x 3 kW - MCB/1P+N - 2 x SOCAPEX 419 out

M30/123MN/HAR

M30/123MN/SOC

1DA2DE100004 6 x 5 kW - MCB/1P+N - 2 x HARTING HAN HsB 6+PE out M30/65MN/HAR

Dimensions: 456 x 444 x 132 mm - Net weight: 20 kg

Notes:

• Power supply cable 1.5 m - 5 x 10 mm 2 , no connector attached.

• Front panel DMX input on XLR5.

• Comes with kit for installation in a 19" touring rack and 4 rubber feet.

• Other electrical protection on request.

MEMORACk 15

1DD206120004 6 x 3 kW - MCB/1P+N - 6 x twin Cebec sockets

1DD206220004 6 x 3 kW - MCB/1P+N - 6 x twin Schuko sockets

1DE204120004 3 x 5 kW - MCB/1P+N - 3 x CEE17 32A sockets

M15/63MN/C

M15/63MN/D

M15/35MN/CEE


Notes:

• Power supply cable 1.5 m - 5 - 4 mm 2 , no connector attached.

• Front panel DMX input on XLR5.

• Comes with kit for installation in a 19" touring rack and 4 rubber feet.

• Other electrical protection on request.

Accessories

Carrying handle for MEMORACK 15 and 30

Hanging kit - delivered without hook - hole Ø 10.5 mm

PORT/M30

SUSP/M30

Set of 2 whips HAR/6 CEE17 16A - 1 m length for M30/123MN/HAR KIT/HAR/6CEE

Set of 2 whips HAR/6 PC double NF 10/16 - 1 m length for

M30/123MN/HAR KIT/HAR/6PCNF

Set of 2 whips HAR/3 PC CEE17 32A - 1 m length for M30/65MN/HAR KIT/HAR/3CEE

Standard Outlet Panels (other outlets upon request)

M30/123MN/HAR

M15/63MN/C

M30/123MN/SOC

M15/35MN/CEE

M30/65MN/HAR

25


Dimming

MIkAPACk

MIkAPACk 30 - 12 x 3 kW

Intelligent, all-digital dimmer packs as portable units or for 19" rack mounting.

The dimmers are suitable for continuous duty of 12 channels of

3 kW at 35° C up to 30 kW.

For architectural applications, a DB9 connection allows to easily recall 4 internal pre-programmed dimmer memories via dry contacts.

MIkAPACk 15 - 6 x 3 kW

Intelligent, all-digital dimmer packs as portable units or for 19" rack mounting.

The dimmers are suitable for continuous duty of 6 channels of

3 kW at 35° C up to 15 kW.

MIKAPACK dimmers feature similar performances to the MEMO dimmer range at a very competitive price without concessions to quality and reliability. The products are designed for decentralised dimming in fixed installations, touring, stage, TV studio and architectural lighting.

MIKAPACK dimmers are available with all standard European outlets and, for permanent installation or flight case applications, with screw-on terminal strip.

•

•

•

•

•

•

•

•

•

•

•

•

An optional carrying handle is available for portable units. The units are shipped with the necessary parts for installation in 19” racks.

Common features of the range are:

4 control buttons, 2 x 8 character LCD display and user-friendly menu for easy access to all dimmer functions.

First dimmer address selection.

Local test of a dimmer (steady or chaser).

6 pre-programmed chasers with 6 intensity levels.

Patch selectable per dimmer.

9 dimmer laws selectable per dimmer + 1 user programmable law.

Preheat selectable per dimmer.

Maximum dimmer levels selectable per dimmer.

Storage of 16 lighting cues.

Last lighting cue maintained in case of DMX signal interruption or loss. (cue, last DMX values or fading out).

Return to factory default values.

User customization of menu items.

Technical Specifications

•

•

•

•

•

Power supply: 230 V / 400 V Star 3NPE, 50/60 Hz.

Dimmer protection with MCB's, 1P+N.

Suitable for continuous duty at 35° C.

40 A power semiconductors.

Control protocol: DMX512A on XLR5, with galvanic isolation.

26


Intelligent Dimmer Packs for General Purpose Applications


MIkAPACk 30

5021.03.200 12 x 3 kW - MCB / 1P+N - 12 x single NF/CEBEC sockets

5021.03.210 12 x 3 kW - MCB / 1P+N - 12 x single Schuko sockets

MIK30/123MN/C

MIK30/123MN/D

5021.03.220 12 x 3 kW - MCB / 1P+N - Screw-on terminal strip MIK30/123MN

5021.03.230 12 x 3 kW - MCB / 1P+N - 12 x single CEE 16 A (P17) sockets MIK30/123MN/CEE

5021.03.240 12 x 3 kW - MCB / 1P+N - 12 x single Swiss sockets

5021.03.250 12 x 3 kW - MCB / 1P+N - 12 x single Uk 15 A sockets

5021.03.260 12 x 3 kW - MCB / 1P+N - 2 x SOCAPEX connector

5021.03.270 12 x 3 kW - MCB / 1P+N - 2 x Harting Output

MIK30/123MN/H

MIK30/123MN/UK

MIK30/123MN/SOC

MIK30/123MN/HART


Notes:

• Power supply cable 1.5 m - 5 x 10 mm 2 no connector attached

• Front panel DB9 connection for memory recall

• Front panel DMX input on XLR5

• Front brackets for 19" rack mounting

• 1P+N protection by MCB per channel

• 4 rubber feet

• Kit for installation in a 19" touring rack

MIkAPACk 15

5021.03.000 6 x 3 kW - MCB / 1P+N - 6 x single NF/CEBEC sockets

5021.03.010 6 x 3 kW - MCB / 1P+N - 6 x single Schuko sockets

MIK15/63MN/C

MIK15/63MN/D

5021.03.020 6 x 3 kW - MCB / 1P+N - Screw-on terminal strip MIK15/63MN

5021.03.030 6 x 3 kW - MCB / 1P+N - 6 x single CEE 16 A (P17) sockets MIK15/63MN/CEE

5021.03.040 6 x 3 kW - MCB / 1P+N - 6 x single Swiss sockets

5021.03.050 6 x 3 kW - MCB / 1P+N - 6 x single Uk 15 A sockets

MIK15/63MN/H

MIK15/63MN/UK

Dimensions: 440 x 355 x 88 mm - Net weight: 10.3 kg

Notes:

• Power supply cable 1.5 m - 5 x 4 mm 2 no connector attached

• Exception for MIK15/63M only connection on 3-phase terminal strip

• Front panel DMX input on XLR5

• Front brackets for 19" rack mounting

• 1P+N protection by MCB per channel

• 4 rubber feet

• Kit for installation in a 19" touring rack

Options and Accessories

5021.03.100 Carrying handle for MIKAPACK 15

5021.03.130 Truss clamping kit for MIKAPACK 15

5021.03.150 Carrying handle for MIKAPACK 30

PORT/MIK15

KIT/CLAMP/MIK15

PORT/MIK30

Standard Outlet Panels (other outlets upon request)

12 x CEE 16 A (P17)

12 x NF/CEBEC or 12 x Schuko

27


Dimming

Touring

Racks

The best Dimmers may well not be those you are used to...

MEMORACK and MIKAPACK dimmer modules can also be factory installed in suitable flight cases for touring applications.

The dimmers are all 1pole protected with neutral disconnect and the individual dimmer rack power supply is protected against any ground fault by an RCD. This makes the dimmers safe and compliant with highest industry standards and international regulations.

Standard ADB touring racks are available in 24-channel or 12-channel configurations with European outlets (Schuko, NF/CEBEC,

CEE16 and/or multiconnectors: Harting, Socapex-compatible) without top patch. The dimmers, 19” panels and other hardware are mounted on a self-supporting welded steel frame (19U) and fitted with heavy-duty caster for easy transport. Flight case is fitted with removable covers for front and rear access.

Local Control without Lighting Desk:

•

•

•

•

•

Flashing of one dimmer for easy luminaire identification in a rig

Chaser

Setting of a dimmer level

Creation, editing and play-back of lighting cues depending on the dimmer range selected.

"Panic" cue which always overrides DMX

Custom Versions

ADB touring racks can be built to order with a custom combination of standard building blocks with a wide choice of patch panels, direct outputs, RCD protections, multiconnectors, and accessories.

Custom versions are available upon request; please contact your ADB Distribution Partner or ADB Sales directly.

28


Flight Case Dimmers for Touring

Code Description

Flight Case Dimmer Systems

1001.40.201 Flight case equipped with MIkAPACk 30 - 24 x 3 kW

- 24 x twin CEBEC 10 / 16 A sockets


- 24 x twin schuko 10 / 16 A sockets


- 24 x single CEE 16 A (P17) sockets

1001.40.204 Flight case equipped with MEMORACk 30 - 24 x 3 kW

- 24 x twin CEBEC 10 / 16 A sockets


- 24 x twin schuko 10 / 16 A sockets


- 24 x single CEE 16 A (P17) sockets


- 12 x single CEE 32 A sockets

Reference

FCMIK243MN/C

FCMIK243MN/D

FCMIK243MN/CEE

FCMR243MN/NC

FCMR243MN/D

FCMR243MN/CEE

FCMR125MN/CEE

Other configurations (connectors) and systems are available upon request. These are some standard examples.

Please contact your ADB sales partner for further information.

Common Features:

Flightcase 12 U high, equipped either with two MIKAPACK 30 or two MEMORACK 30 dimmers. Flightcase is on 4 casters.

• detachable front and back lid for flightcase

• 125 A 5 pole CEE connector

• RCD and MCB 3P+N disconnect

• individual channels protected with 1P+N MCB

• control via DMX512

Dimensions: 820 x 550 x 725 mm

40081

40080

40082

40083

40084

32086

32135

40085

Options and Accessories

Kit Harting 4 connectors - instead of individual sockets FCHRAR4

Kit Harting 4 connectors - parallel connection to existing sockets FCHAR4.BRA

Kit Socapex 4 connectors - instead of individual sockets FCSOC4

Kit Socapex 4 connectors - parallel connection to existing sockets FCSOC4.BRA

Kit Work Light

Power supply cable - (Legrand) HYPRA PA+FG

Power supply cable - 3P+N+PE (Marechal) PA+FG

Replacement of connector Legrand with a connector Marechal

FCLIGHT

FCMOB.LEG

FCMOB.MAR

FCLEGMAR

29



MOTORIZED WARP

WARP/M

& WARP/M Daylight

The only fully automated Zoom Profile totally noiseless

WARP/M - Motorized Zoom Profile Spotlight

Main Features:

•

•

•

•

•

•

•

•

12° - 30° and 22° - 50° versions

800 W halogen axial lamp, 230 V, 3200 °K, G9.5

Light output higher than with a 1200 W conventional profile

Dichroic glass reflector for low gate and beam temperature

B size gate for maximum gobo definition

Motorized rings allowing control of focus, zoom, iris, and shutters

Independent lamp position and spot / even adjustments

Remote control via DMX 512 or Ethernet of all beam shaping functions + pan & tilt

•

•

•

•

Yoke repositioning better than 0.1°

3-phase stepper motors and no fan ensure true noisefree operation

Absolute sensor technology = no pan & tilt reset

Web page interface for bidirectional communication and diagnostics (runs on any browser)

•

•

Colour control with scroller for perfect colour matching

360° endless rotation capability of gobos and each individual shutter blade

The absence of fans is the first condition for a truly silent operation!

WARP/M Daylight - Motorized Daylight Zoom Profile Spotlight

adapted to host a 575 W discharge lamp.

“High Quality Image” features an ellipsoidal reflector optimized for projecting an homogeneous light beam, essential for pattern projection. This fixture can be used for applications where the design requires very even light distribution, e.g. to uniformly cover an acting area, or for high quality gobo projection.

Specific features for the Daylight version of WARP/M:

•

•

•

•

•

•

•

•

•

G22 axial discharge lamp 575 W / 6000 K / 1000 h / 49000 lm hot restrike

Light output comparable with the one of a 2500 W daylight lamp with condenser optic system

14500 lux at 10 m/12° with Peak Performance reflector


Patented ring control of focus, zoom, iris, gobos and shutters

Individual 360° rotation of shutters and gobos

Electronic flicker free ballast with integrated 24 V power supply for accessories

Power supply: 230 V +/- 15% / 50-60 Hz or 90 - 264 V

Lightweight, compact, robust, ergonomic

Options:

•

•

DMX controlled mechanical dimmer

Combined mechanical dimmer and colour changer

30


Zoom Profiles for 600/800 W Halogen & for 575 W Discharge Lamps

for Remote Operation

Code

1017.10.020

1017.10.030

1017.10.220

1017.10.230

Description

Motorized Zoom Profile Spotlights

WARP/M 12° - 30° / 230 V

WARP/M 22° - 50° / 230 V

WARP/M 12° - 30° / 90 - 264 V

WARP/M 22° - 50° / 90 - 264 V

Dimensions

WARP/M 12°-30°: 748 x 550 x 805 mm - Net Weight: 32 kg

WARP/M 22°-50°: 658 x 550 x 805 mm - Net Weight: 32 kg

Reference

WARP/M/12-30

WARP/M/22-50

WARP/M/12-30/U

WARP/M/22-50/U

Lamps

2990.40.500 G 9.5, biplane filament, halogen lamp 230V-800W-3200K


Warning: WARP halogen spotlights are exclusively designed for a biplane filament halogen lamp with a G9.5 base.

Any modification to accommodate another lamp is not allowed and would void CE safety approval and product warranty.

1017.10.520

1017.10.530

Motorized Daylight Zoom Profile Spotlights

WARP/M/DL 12°-30° / 90-264V

WARP/M/DL 22°-50° / 90-264V including :

• dichroic glass reflector "High Quality Imaging"

• G22 lampholder for 575W daylight discharge lamp

• motorized yoke mounted on a control box with integrated flicker free electronic ballast and 24 V power supply for accessories

• G22 hot restrike metal halide lamp 575W-6000K-1000h-

49000 lm (adjusted)

Dimensions

WARP/M/DL 12°-30°: 800 x 549 x 766 mm - Net Weight: 36 kg

WARP/M/DL 22°-50°: 706 x 549 x 766 mm - Net Weight: 35.5 kg

Note:

Due to higher heat dissipation of the electronic ballast at low voltage, the WARP/DL/U range ballasts are equipped with a low noise fan to ensure reliability.

800W/G9.5/3200K

600W/G9.5/3200K

WARP/M/DL/12-30/U/HQ

WARP/M/DL/22-50/U/HQ

31



WARP &

WARP Daylight

•

•

•

•

•

•

•

•

•

•

•

•

WARP - FANLESS Zoom Profile Spotlight

Main Features:

12°-30° and 22°-50° versions

800 W halogen axial lamp, 230 V, 3200 °K, G9.5

Light output higher than with a 1200 W conventional profile


B size gate for maximum gobo definition

Innovative ring control of focus, zoom, iris, gobo and shutters


Access to all controls from any position around the spotlight

Independent lamp position and spot / even adjustments

Holder for one iris diaphragm + one 360° rotating gobo (or two gobos without iris)

Stepless yoke positioning along the spotlight for balance adjustment

Innovative, compact, robust, ergonomic design

WARP Daylight - Zoom Profile Spotlight

adapted to host a 575 W discharge lamp, available in special rental version and with two optical systems.

“Peak Performance” optical system with ellipsoidal reflector optimized for maximum light output. The fixture gives an extra

“punch” of light, very useful for display and highlighting of scenic elements and actors.

“High Quality Image” features an ellipsoidal reflector optimized for projecting an homogeneous light beam, essential for pattern projection. This fixture can be used for applications where the design requires very even light distribution, e.g. to uniformly cover an acting area, or for high quality gobo projection.

Main Features:

•

•

•

•

•

•

•

•

•

•

•

•

12°-30° and 22°-50° versions

G22 axial discharge lamp 575 W / 6000 K / 1000 h / 49000 lm hot restrike

Light output comparable with the one of a 2500 W daylight lamp with condenser optic system

14500 lux at 10 m/12° with Peak Performance reflector


Patented ring control of focus, zoom, iris, gobos and shutters


Access to all controls from any position around the spotlight

Electronic flicker free ballast with integrated 24 V power supply for accessories

Power supply: 230 V +/- 15% / 50-60 Hz or 90 - 264 V

Convection cooling -> no fan, no noise

Lightweight, compact, robust, ergonomic

32



for Manual Operation

1017.01.320

1017.01.330

1017.01.321

1017.01.331

1017.01.520

1017.01.530

1017.01.521

1017.01.531

Code Description

1017.01.020

1017.01.030

1017.01.220

1017.01.230

Zoom Profile Spotlights

WARP 12°-30° / 230 V

WARP 22°-50° / 230 V

WARP 12°-30° / 90 - 264 V

WARP 22°-50° / 90 - 264 V including :

• dichroic glass reflector

• 2 zoom lenses with anti-reflection coating

• patented ring control of all functions

• G 9.5 lampholder for axial lamp 800 W/230 V

• 1.6 m power supply cable without plug

• 1 metal filter frame (185 x 185 mm)

Dimensions

WARP 12°-30°: 748 x 495 x 213 mm - Net Weight: 12.2 kg

WARP 22°-50°: 655 x 495 x 213 mm - Net Weight: 11 kg

Lamps



Warning: WARP halogen spotlights are exclusively designed for a biplane filament halogen lamp with a G9.5 base.

Any modification to accommodate another lamp is not allowed and would void CE safety approval and product warranty.

Reference

WARP/12-30

WARP/22-50

WARP/12-30/U

WARP/22-50/U

800W/G9.5/3200K

600W/G9.5/3200K

Daylight Zoom Profile Spotlights

"Peak Performance"

WARP/DL 12°-30° / 230V

WARP/DL 22°-50° / 230V

WARP/DL 12°-30° / 90-264V

WARP/DL 22°-50° / 90-264V

Daylight Zoom Profile Spotlights

"High Quality Imaging"

WARP/DL 12°-30° / 230V

WARP/DL 22°-50° / 230V

WARP/DL 12°-30° / 90-264V

WARP/DL 22°-50° / 90-264V including :

• dichroic glass reflector, two possibile types are available at the time of ordering:

"Peak Performance Reflector" gives an extra boost of light in the centre of the field.

"High Quality Imaging" renders a flat and even light distribution



• G22 lampholder for 575W daylight discharge lamp

• flicker free electronic ballast, with integrated 24 V power supply for accessories, mounted onto the yoke

• G22 hot restrike metal halide lamp 575W-6000K-1000h-

49000 lm (adjusted)

• 1.6 m power supply cable without plug

• 1 metal filter frame

Dimensions

WARP/DL 12°-30°: 800 x 475 x 500 mm - Net Weight: 18 kg

WARP/DL 22°-50°: 706 x 475 x 500 mm - Net Weight: 17.5 kg

WARP/DL/12-30

WARP/DL/22-50

WARP/DL/12-30/U

WARP/DL/22-50/U

WARP/DL/12-30/HQ

WARP/DL/22-50/HQ

WARP/DL/12-30/U/HQ

WARP/DL/22-50/U/HQ


33


WARP Daylight

Code

1017.01.323

1017.01.333

1017.01.523

1017.01.533

Description

Rental Daylight Zoom Profile Spotlights

"Peak Performance"

WARP/DL/R 12°-30° / 230V without ballast


Reference

WARP/DL/R/12-30

WARP/DL/R/22-50

Rental Daylight Zoom Profile Spotlights

"High Quality Imaging"


WARP/DL/R 22°-50° / 230V without ballast including :

• dichroic glass reflector



• GX9.5 lampholder for 575W daylight discharge lamp

• igniter for cold strike

• 2 m power supply cable without plug

• 1 metal filter frame

• 1 safety switch

Warning: Rental daylight WARP are supplied without magnetic or electronic ballast. This must be provided by the customer before operation!

WARP/DL/R/12-30/HQ

WARP/DL/R/22-50/HQ

34

CC/WARP COMBO/WARP for WARP Daylight

MD/WARP for WARP Daylight



Accessories


Accessories for WARP and WARP/M

1090.52.205 Metal filter frame (185 x 185 mm)

1090.47.050 Safety grid (185 x 185 mm)

1000.40.100 Double gobo holder (rotating) type B

1000.40.110 Combined iris diaphragm & gobo holder (rotating) type B

1000.40.120 Single gobo holder (non rotating) for WARP type B

1017.25.020 Flight-case for WARP/M

1017.25.030 Flight-case for 6 WARP

1192.10.550 Hook clamp for Ø 35 to Ø 50 mm tubes



1092.10.600 Hook clamp for WARP/M (2 required)

1092.00.092 1.2 m spotlight safety cable

1050.40.405 Colour changer for WARP supplied with :

• 1 16-colour gel filter roll

• 1 adapter plate (APL-CC/WARP)

• 1 DMX/supply cable

1050.40.400 Adapter plate for colour changer

PFM/185

GR/185

SP/2GO/WARP

SP/OR-GO/WARP

SP-GO/WARP

FLY/WARP/M1

FLY/WARP/6

A20

A25

A30

A40

CAS120/N

CC/WARP

APL-CC/WARP

Accessories for WARP Daylight and WARP/M Daylight

1050.40.410 Mechanical dimmer with adapter plate and DMX/supply cable

1050.40.440 Filter frame holder cassette for the mechanical dimmer

1050.40.420 "Combo" mechanical dimmer + colour changer with adapter plate and DMX/supply cable (colour string not included!)

1050.40.405 Colour changer supplied with :

• 1 16-colour gel filter roll

• 1 adapter plate (APL-CC/WARP)

• 1 DMX/supply cable


1000.40.110 Combined iris diaphragm & gobo holder (rotating) type B

1000.40.120 Single gobo holder (non rotating) type B for WARP

1017.25.020 Flight-case for WARP/M/DL

1017.25.040 Flight-case for WARP/DL

1017.25.030 Flight-case for WARP/DL/Rental




1092.10.600 Hook clamp for WARP/M/DL (2 required)


MD/WARP

MD/CASS

MD/CC/WARP

CC/WARP

APL-CC/WARP

1050.40.460 Filter frame holder cassette for the “Combo” mechanical dimmer MD/COMBO/CASS


1090.52.205

1090.47.050

1000.40.100

Metal filter frame (185 x 185 mm)

Safety grid (185 x 185 mm)

Double gobo holder (rotating) type B

APL-CC/WARP

PFM/185

GR/185

SP/2GO/WARP

SP/OR-GO/WARP

SP-GO/WARP

FLY/WARP/M1

FLY/WARP/DL

FLY/WARP/6

A20

A25

A30

A40

CAS120/N

Note: WARP/DL/Rental will fit into the flight case for 6 WARP spotlights

35



EUROPE Range

PC and Fresnel Spotlights for 1000 / 1200 W Halogen Lamps

C101 10° - 65° Plano-Convex

This spotlight, based on high efficiency optics, produces a sharp-edged beam. It can be used for top, front or side lighting.

Field angle adjustable from 10° to 65° (7.5° - 60° beam angle).


Net weight: 8 kg

C103 7° - 61° Prism-Convex

This spotlight, based on high efficiency optics, produces a semisharp-edged beam. It can be used for top, front or side lighting.

Field angle adjustable from 7° to 61° (3.5°- 55° beam angle).


Net weight: 9.6 kg

F101 13° - 59° Fresnel

This spotlight, based on high efficiency optics, produces a softedged beam.

It can be used on large stages or for studio lighting.

Field angle adjustable from 13° to 59° (7.5°- 52° beam angle).


Net weight: 6 kg

36


The Ultimate in Light Output

1000 / 1200 W PC & Fresnel Spotlights

Code

1016.12.150

Description

C 101

Plano-convex spotlight 10° - 65°

Supplied with :

• Ø 150 mm plano-convex lens

• Glass diffuser

• GX 9.5 lampholder

• 2 m power supply cable (2 x 1.5 + 1.5 mm 2 ) without plug

• 1 integrated safety grid


1010.12.150

C 103

Prism-convex spotlight 7° - 61°

Supplied with :

• Ø 150 mm prism convex lens





1011.12.150

F 101

Fresnel spotlight 13° - 59°

Supplied with :

• Ø 150 mm Fresnel lens


• 2 m power supply cable (2 x 1.5 + 1.5 mm



Extra charge for pole operation

• 2 movements : pan + tilt

• 3 movements : pan + tilt + focus

2 ) without plug

Motorized yoke: upon request

Accessories


1001.50.115 Rotatable 4-leaf barndoor without safety cable

1092.00.094 0.75 m safety cable for barndoors





1090.47.050 Safety grid (185 x 185 mm)

Halogen lamps 230 V - GX 9.5 : see relevant page

Reference

C 101

C 103

F 101

CP/PC-F/2M/1KW

CP/PC-F/3M

PFM/185

CFN/185

CAS/CF/75

A20

A25

A30

CAS120/N

GR/185

37



EUROPE Range

1000 / 1200 W Zoom Profile Spotlights with Condenser Optics

DW 105 15° - 38°


Net weight: 15 kg

DS 105 15° - 31°


Net weight: 14 kg

DSN 105 11° - 23°


Net weight: 15.1 kg

DN 105 9° - 20°


Net weight: 18.4 kg

DVW 105 38° - 57°


Net weight: 13.5 kg

38



1000 / 1200 W Zoom Profile Spotlights


1012.10.506

DW105

Zoom profile spotlight 15° - 38°

Supplied with :

• 3 zoom lenses and condenser optics

• Anti-reflection coating of all lenses


• Set of 4 beam shaping shutters with heat insulated handles



DW105

1012.10.606

1012.10.806

DS105


Supplied with :







DSN105

Zoom profile spotlight 11° - 23 °

Supplied with :







DS105

DSN105

1012.10.706

DN105


Supplied with :







DN105

1012.10.906

DVW105


Supplied with :







DVW105

Extra charge for pole operation, 2 movements, pan + tilt


CP/D1/2M

Accessories

1090.52.205 Metal filter frame (185 x 185 mm) for DW, DVW, DS and DSN types PFM/185

1090.52.305 Metal filter frame (245 x 245 mm) for DN type

1090.47.050 Safety grid (185 x 185 mm) for DW, DVW, DS and DSN types

1090.47.060 Safety grid (245 x 245 mm) for DN type

1000.40.080 "A" size gobo holder with retention ring

1000.40.090 "B" size gobo holder

1000.19.531

1000.19.631

1000.19.541

1192.10.550

1192.10.560

1092.10.550

1092.00.092

Iris diaphragm Ø 75

Iris diaphragm Ø 80

Iris diaphragm Ø 80 with black-out

Hook clamp for Ø 35 to Ø 50 mm tubes



1.2 m spotlight safety cable

Halogen lamps 230 V - GX 9,5 : see relevant page

PFM/245

GR/185

GR/245

SP-GO/A

SP-GO/B

OR/75

OR/80

OR/80/BO

A20

A25

A30

CAS120/N

39



EUROPE Range

PC and Fresnel Spotlights for 2000 W Halogen Lamps

C201 5° - 65° Plano-Convex

This spotlight, based on high efficiency optics, produces a sharp-edged beam.

It can be used for top, front or side lighting.

Field angle adjustable from 5° to 65° (3,5° - 61° beam angle).


Net weight: 12.6 kg

C203 8° - 58° Prism-Convex

This spotlight, based on high efficiency optics, produces a semi-sharp-edged beam. It can be used for top, front or side lighting.



Net weight: 12.6 kg

F201 12° - 61° Fresnel

This spotlight, based on high efficiency optics, produces a soft-edged beam. It can be used on large stages or for studio lighting.



Net weight: 9.6 kg

40



2000 W PC & Fresnel Spotlights

Code

1013.20.150

Description

C 201

Plano-convex spotlight 5° - 65°

Supplied with :

• Ø 200 mm PC lens

• GY16 lampholder




Reference

C201

1010.20.150

C 203


Supplied with :

• Ø 200 mm prism-convex lens

• GY16 lampholder




1011.20.150

F 201


Supplied with :


• GY16 lampholder




Extra charge for pole operation

• 2 movements: pan + tilt

• 3 movements: pan + tilt + focus


Accessories


1090.47.060 Safety grid (245 x 245 mm)

1001.50.215 Rotatable 4-leaf barndoor without safety cable

1092.00.094 0.75 m safety cable for barndoors





Halogen lamp 230 V - GY 16 : see relevant page

C203

F201

CP/PC-F/2M/2KW

CP/PC-F/3M

PFM/245

GR/245

CFN/245

CAS/CF/75

A20

A25

A30

CAS120/N

41



EUROPE Range

2000 W Zoom Profile Spotlights with Condenser Optics

DS 205 13° - 36°


Net weight: 22.7 kg

DN 205 10° - 22°


Net weight: 22.9 kg

DVW 205 30° - 54°


Net weight: 21.3 kg

42



2000 W Zoom Profile Spotlights

Code

1012.20.606

Description

DS 205

zoom profile spotlight 13° - 36°

Supplied with :



• Low noise fan

• GY16 lampholder




1012.20.706

DN 205


Supplied with :



• Low noise fan

• GY16 lampholder




Reference

DS 205

DN 205

1012.20.906

DVW 205


Supplied with :



• Low noise fan

• GY16 lampholder






Accessories


1090.47.060 Safety grid (245 x 245 mm)



1000.19.531 Iris diaphragm Ø 75


1000.19.541 Iris diaphragm Ø 80 with black-out





Halogen lamps 230 V - GY 16 : see relevant page

DVW 205

CP/D2/2M

PFM/245

GR/245

SP-GO/A

SP-GO/B

OR/75

OR/80

OR/80/BO

A20

A25

A30

CAS120/N

43



EUROPE Range

Fanless Profiles / No Noise

2000/2500 W Fanless Zoom Profile Spotlights with

Condenser Optics

DS 256 14° - 38°


Net weight: 22.5 kg

DN 256 9° - 22°


Net weight: 23 kg

DVW 256 32° - 51°


Net weight: 21 kg

44



2000/2500 W Zoom Profile Spotlights

Code

1012.20.606

Description

DS 256


Supplied with :



• Fanless

• G22 lampholder




1012.20.706

DN 256


Supplied with :



• Fanless

• G22 lampholder




Reference

DS 256

DN 256

1012.20.906

DVW 256


Supplied with :



• Fanless

• G22 lampholder






Accessories


1090.47.060 Safety grid (245 x 245 mm)





1000.19.541 Iris diaphragm Ø 80 with black-out





Halogen lamps 230 V - G22 : see relevant page

DVW 256

CP/D2/2M

PFM/245

GR/245

SP-GO/A

SP-GO/B

OR/75

OR/80

OR/80/BO

A20

A25

A30

CAS120/N

45



"A" RANGE

Professional Theatre Spotlights for 300 / 500 / 650 W Halogen Lamps

A 56 C 9° - 66° Prism Convex

This spotlight produces a high level output and a top quality diffused edged beam from a tight spot to a wide flood with beam angles from 5° to 63° (field angle 9° - 66°). Providing a tighter and more controlled beam than a Fresnel, the A 56 C is ideal for front or side lighting on small stages where a maximum of 650 W is required.


Net weight: 3.5 kg

A 57 F 14° - 59° Fresnel

This spotlight produces a high output level and a soft-edged beam, variable from a tight spot of 8° to a wide flood of 51° (field angle 14° - 59°). It is intended for side, back or general lighting, as well as for application in small studios.


Net weight: 3.4 kg

A 59 Z 16° - 35° Zoom Profile with

Condenser Optics

This spotlight, fitted with a spherical mirror and condenser optics, produces excellent light levels and beam quality. As a variable beam angle profile, the A 59 Z has a very useful range of 16° to

35° and provides a good directional light with cut off beam and variable sharpness. It is perfect for use in smaller venues and to highlight details on larger stages.


Net weight: 5.8 kg

46


Professional Theatre Spotlights

for 300 / 500 / 650 W Halogen Lamps


1005.31.560

1005.31.570

A 56 C

Prism convex spotlight 9° - 66°

Supplied with :


• GY 9.5 lampholder

• 2 m silicone power supply cable (2 x 1.5 + 1.5 mm 2 ) without plug

• 1 safety grid (155 x 155 mm)


1005.31.590

A 57 F


Supplied with :




• 1 safety grid


A 59 Z

Zoom profile spotlight 16°- 35°

Supplied with :



• 4 beam shaping shutters with heat insulated handles



2 ) without plug

Accessories


3203.10.130 Safety grid (155 x 155 mm)

1090.61.010 Rotatable 4-leaf barndoor for A 57 F and A 56 C

1000.19.200 Iris diaphragm for A 59 Z

1000.40.065 Double gobo holder for A 59 Z






Halogen lamps 230 V - GY 9.5 : see relevant page

A 56 C

A 57 F

A 59 Z

PFM/A650

GR/A650

CF/A650

OR/A650

SP/A650

A6

A20

A25

A30

CAS120/N

47



EUROSPOT

General Purpose Theatre Spotlights for 300 / 500 / 650 W Halogen Lamps

F 51 18° - 65° Fresnel spotlight

The F51 is characterised by a soft-edged beam variable from a tight spot of 18° to a wide flood of 65°.


Net weight: 2.2 kg

C 51 9°- 60° Prism-convex spotlight

The C51 is characterised by a semi-sharp edged beam variable from a tight spot of 9° to a wide flood of 60°.


Net weight: 2.7 kg

DS 54 18° - 38° Zoom profile spotlight with condenser optics

The DS54 is a variable angle profile spotlight, equipped with

2 individually adjustable zoom lenses. It provides a sharp or soft-edged beam over a very useful range of 18° to 38°. Zoom focusing is smooth and stable in any position. The use of high quality condenser optics results into a superior beam quality and very accurate imaging capabilities.


Net weight: 3.7 kg

DW 54 30° - 47° Zoom profile spotlight with condenser optics

The DW54 is a variable 30°-47° wide angle profile spotlight, equipped with 2 individually adjustable zoom lenses. Zoom focusing is smooth and stable in any position.The use of high quality condenser optics results into an even light distribution at wide angles with very accurate imaging capabilities. This makes the DW 54 a very useful complement to the DS 54 (18°-38°) of the same family.


Net weight: 3.5 kg

48


General Purpose Theatre Spotlights

for 300 / 500 / 650 W Halogen Lamps

Code

1005.32.100

Description

F 51


Supplied with :


• GY9.5 lampholder


• 1 safety grid


1005.32.110

1005.32.130

C 51


Supplied with :




• 1 safety grid


1005.32.140

DS 54


Supplied with :

• 2 zoom lenses and 1 condenser lens


• 4 beam shaping shutters with isolated handles


• 1 safety grid


DW 54


Supplied with :

• 2 zoom lenses and 1 condenser lens


• 4 beam shaping shutters with isolated handles


• 1 safety grid


Accessories

2 ) without plug


1090.62.205 Rotatable 4-leaf barndoor for F51 and C51

1000.19.645 Iris diaphragm for DS and DW profiles

1000.40.045 Gobo holder for DS and DW profiles






Halogen lamps 230 V - GY 9.5 : see relevant page

Reference

F51

C51

DS54

DW54

PFM/EURO

CF/EURO

OR/EURO

SP/GO/EURO

A6

A20

A25

A30

CAS120/N

49



ALC4-2

General Characteristics

• Cyclorama and fill light fixture for Theatre and TV Studio Lighting.

•

•

•

Dynamic RGB + White module with 4 x 50 W LED sources, factory calibrated.

Even light distribution through high brilliance aluminum reflector.

Selectable beam angle through asymmetric or symmetric reflector, or 4-leaf reflective barndoor.

•

•

Full RGB + White allowing more than one million colours, including pure yellow and full amber.

Compact, light weight unit.

Specific Characteristic

• Pole operated movement ALC4-2 / PO with PAN & TILT.

•

•

•

User Benefits

• Excellent color uniformity between several sources with no color separation between beams and no coloured shadows.

•

•

•

7 “calibrated” preset “White” levels between 2700K and 6500K.

Stepless control from warm-white 2700K to daylight 6500K.

Closed-loop optical feedback circuit in each LED source guarantees consistency in colour, white and light output.

•

•

Creation of various background illuminations and / or effects.

Smooth, flicker-free light output, without any colour or white changes when dimmed.

High efficiency and major energy savings in comparison with halogen fixtures.

Removable reflector allowing other beam control accessories.

Reduced CO2 footprint compared with conventional halogen fixtures.

ALC4-2 is a unique, state-of-the-art product, another ADB innovation

50


LED Fixtures

Code

1060.20.000

1060.21.000

Description

ALC4-2 - LED RGB+White Fixture

ALC4-2 - LED RGB+White Fixture

with pole operated movement

Supplied with :

• 4 StagePainter D60 2000 light sources

• clamping tool for mounting the instrument on a pipe with an

Dimensions with asymmetric reflector: 380 x 605 x 495 mm without reflector: 182 x 496 x 268 mm

Net weight: 10 kg

Accessories

1060.10.010 Asymmetric Cyclorama reflector

1060.10.020 Symmetric reflector for further throw distance

1060.10.050 Symmetric reflector for further throw distance 36°

1060.10.030 Barndoor with high efficiency reflecting surface

1060.10.080 20° Honeycombs for REF/CF/ALC4



1060.10.040 Interconnection power supply cable (2 m)

Reference optional hook

• 1.6 m power supply cable with POWERCON twist-lock connector and with open ends on the other side

ALC4-2 Features:

• high illumination quality

• closed-loop optical feedback for consistent color and intensity

• white color temperature presets from 2,700K to 6,500K

• completely mixed source with excellent color uniformity and no color separation in the beam

• no degrading ultraviolet or uncomfortable infrared wavelengths in beam

• sustainable and environmentally friendly

• robust package absent of fragile glass

• reduced CO2 footprint compared to conventional halogen fixtures

• no waste (gels, lamps, etc.) throughout the product life

ALC4-2

ALC4-2/PO

REF/ASYM/ALC4

REF/SYM/ALC4

REF/SYM36/ALC4

REF/CF/ALC4

ALC4/H20

ALC4/H40

ALC4/H60

PWRLNK/2M/ALC4

REF/SYM/ALC4


REF/SYM36/ALC4 REF/CF/ALC4 REF/ASYM/ALC4

51


Cyclorama Lights

ACP 1000

Cyclorama light with asymmetrical reflector for use with gel filter


Net weight: 5 kg

The ACP Cyclorama lights features a unique combination of an asymmetrical reflector and 2, highly reflective side mirrors to provide high quality lighting for both studio and stage applications.

These fixtures are ideal for creating an homogenous light level or for stage set lighting, e.g.

•

•

• vertical, even illumination of cyclorama or horizon screen diffused back lighting asymmetrical soft light

These compact and lightweight luminaires are designed for use with 625 W, 1000 W or 1250 W clear or frosted halogen lamps, and either gel or glass colour filters.

Excellent ventilation by natural convection ensures long life of lamps and filters.

Flexibility is provided by a large choice of single, double, triple or quadruple units assembled in either horizontal, vertical or square formats.

Each combination can be supplied for manual or pole operation.

52


625 W / 1000 W / 1250 W Cyclorama Lights

Code Description

ACP 1000 Cyclorama

1060.02.020 single for

1060.02.040 double horizontal for

1060.02.100 double vertical for

1060.02.120 triple in line for

1060.02.060 quadruple in line for

1060.02.080 quadruple in square for

- gel filters

- gel filters

- gel filters

- gel filters

- gel filters

- gel filters

Supplied with :

• R7S lampholder

• Safety grid with 3 mm meshing


Extra charge for pole operation (1 movement : pan)

Accessories

1090.16.040 Vertical barndoors (set of 2 pieces, 1 right & 1 left)

1090.16.080 Horizontal barndoor (one bottom part)





1092.00.092 1.2 m safety cable

Halogen Lamps 230 V - R7S : see relevant page

Reference

ACP1001

ACP1002H

ACP1002V

ACP1003H

ACP1004H

ACP1004C

CFV/ACP

CFH/ACP

A20

A25

A30

A6

CAS120/N

53



Fill Lights

LF 1000 Fill Light with symmetrical Reflector

General purpose fill light for creating even and soft lighting at short distance. Fitted with a 1000 W lamp, it will yield an axial light intensity of 10,000 cd. It can also be used as a high intensity batten when 4 units or more are mounted in a row.


Net weight: 1.5 kg

HF 1000 Fill Light with asymmetrical Reflector

Small cyclorama light for perfectly diffused lighting of projection plans, such as cyclorama, back cloth, wall or scenery. A 4-unit row can be used as a 4-colour cyclorama light. Fitted with a

1000 W lamp, a row of 7 units at 3 m from the cloth, equidistant from each other, will provide a light level of 1000 lux in the median lines and in the plane of a 10 m wide and 5 m high cyclorama.


Net weight: 1.5 kg

These 2 fixtures, fitted with a slewing aluminium reflector, are intended to provide even and soft lighting at short distance. They are particularly suitable for creating a diffused, homogenous light level for small to medium size theatre stages, TV studios, conference rooms...

LF 1000 and HF 1000 fill lights are designed for 230 V / 625 W, 1000 W or 1250 W tubular halogen lamps. Their small size and low weight make them easy to transport and install.

54


625 W / 1000 W / 1250 W Fill Lights

Code Description

LF / HF 1000 Fill Lights

1035.01.010 LF 1000 - with symmetrical reflector

1035.05.120 HF 1000 - with asymmetrical reflector

Supplied with :

• R7S lampholder

• Safety grid with 3 mm meshing


Accessories

1035.01.060 Filter frame holder cassette

1035.08.110 Set of 2 vertical barndoors for LF/HF 1000

1035.08.210 Set of 2 horizontal barndoors for LF/HF 1000 or ACV/F 1000

1035.08.310 Set of 2 vertical barndoors for ACV/F 1000

1035.08.410 Set of 4 filter frames for glass filters with safety grid

1035.08.910 Bracket stand for assembly of 4 LF/HF 1000





1092.00.092 1.2 m safety cable

Halogen Lamps 230 V - R7S : see relevant page

Reference

LF1000

HF1000

ACV/F1000

CFV1/F1000

CFH/F1000

CFV2/ACV/F1000

PF/ACV/F1000

BAR/F1000

A6

A20

A25

A30

CAS120/N

55



SVOBODA

•

•

•

General Characteristics

• Highlights the action on stage

•

•

Dramatises the actors' expression

Creates ethereal scenery

Isolates areas on the stage

Modifies the volumes by creating "lightscreens"

Communicates sublimated concepts

The SVOBODA, lighting batten was designed by the famous scenographer Josef Svoboda, in cooperation with the lighting specialists of ADB. SVOBODA had long been looking for an unusual way of creating dramatic scenery using light only.

The result is the SVOBODA, a 2250 W or 2500 W batten made of nine or ten 24 V lamps, delivering a very bright and quasi parallel light beam, the "Light Curtain". Used as backlighting, cascade or full-on frontal, the SVOBODA provides unique lighting, soft and yet intense at the same time, creating an atmosphere in a class of its own.

2 Types

•

•

HT 2500 (10 lamps) for 110 V / 120 V power supply

HT 2251 ( 9 lamps) for 230 V power supply

Earth connection provided. Usable with gel filters.

Motorized yoke is available upon request

56


SVOBODA Lighting Batten

Code Description

SVOBODA

1070.05.012 SVOBODA Lighting Batten (230V) with:

• Aluminium body

• 9 individual units

• E 40 lampholders for 250 W/24 V mirror lamps

• with 2 m power supply cable with POWERCON twist-lock connector

SVOBODA Lighting Batten (120/240V) with:

• Aluminium body

• 10 individual units

• E 40 lampholders for 250 W/24 V mirror lamps

• with 2 m power supply cable with POWERCON twist-lock connector


Accessory

1092.00.100 Suspension cable (one unit)

250 W - 24 V - E 40 Mirror lamp : see relevant page


Net weight: 16.3 Kg (without lamps) - 17.1 Kg (with lamps)

Reference

HT2251/ALU/ADB

HT2500/ALU/ADB

CS/HT2251

57



SOFTLUX

SOFTLUX cool lights are intended to provide cool running, continuous lighting, with either Tungsten (3200 °K) or Daylight

(5200 °K - 5600 °K) balance, in Film and Studio applications.

They range from 110 W to 440 W in various combinations of

55 W fluorescent lamps.

SOFTLUX produces 300 % to 400 % more lumen per Watt than conventional tungsten lamps resulting in less heat emission, less power consumption, more comfort for the subject and a greatly reduced HVAC cost.

SOFTLUX fluorescent lamps will last a minimum of 6000 h, 60 times longer than conventional tungsten or HMI lamps, without degradation and loss of colour balance.

SOFTLUX dimming is through the DMX signal of a lighting console, and/or a local potentiometer.

SOFTLUX combines a specially designed lamp/reflector unit which gives a symmetrical, directional "punchy" light output and allows longer throw or wider spread as required. The simple attachment of a honeycomb screen allows local light control with

20°, 40° or 60° field angle.

SOFTLUX Linear Space Lights

SLW 220 & SLW 440, fitted with 2 or 4 pairs of 55 W lamps mounted side by side with an integral, 4-leaf black barndoor and optional eggcrate, are intended to produce a wide angular light with relatively sharp edges for illuminating areas, walls, groups of artists and even cyclorama.

SOFTLUX combines modern advances in fluorescent lamp technology and electronic control to provide a powerful, flickerfree light source, both flexible and easy to use.

SOFTLUX comes into a very rigid, lightweight aluminium body, slim and rounded for maximum operational safety, with an elegant finish in a dark grey semi-gloss paint. Other colours upon request.

SOFTLUX fixtures are supplied with:

- a 4-leaf reflective barndoor (SL types)

- a 4-leaf black barndoor (SLW types)

- a yoke with central hole Ø 11 mm for DIN Spigot,

BS4015 or standard hook clamp

- a 2 m power supply cable with open end.

Lamps are not included.

SOFTLUX 110 W

SOFTLUX 220 W

SOFTLUX 330 W with honeycombs

58

SOFTLUX 440 W


SOFTLUX Cool Lights

110 / 220 / 330 / 440 W

Code Description

SOFTLUX Cool Lights - Manual operation

with 4-leaf reflective barndoor, 2 m cable, without lamps

1075.00.080 SOFTLUX 110W - 2 x 55W - 230V DMX/Local Control




Reference

SL110/DMX/LC

SL220/DMX/LC

SL330/DMX/LC

SL440/DMX/LC

SOFTLUX Cool Lights - Pole operation

with 4-leaf reflective barndoor, 2 m cable, without lamps





SL110/DMX/LC/PO

SL220/DMX/LC/PO

SL330/DMX/LC/PO

SL440/DMX/LC/PO

SOFTLUX Linear Space Lights

with 4-leaf black barndoor, 2 m cable, without lamps

1075.02.090 SOFTLUX 2 x 110W in line - 4 x 55W - 230V DMX/Local Control SLW220/DMX/LC

1075.02.105 SOFTLUX 4 x 110W in line - 8 x 55W - 230V DMX/Local Control SLW440/DMX/LC

Dimensions

SL 110/DMX/LC: 645 x 230 x 605 mm - Net weight: 5 kg




Accessories

1075.00.188 Integral safety grid and colour frame for SL110




Integral safety grid and colour frame for SLW220

Integral safety grid and colour frame for SLW440

Swivel arm for SL110 and SL220, including mounting bracket

1075.00.182 20° Honeycombs for SOFTLUX SL110


, 1075.00.186 60° Honeycombs for SOFTLUX SL110










1075.02.192 20° Honeycombs for SOFTLUX SLW220




1075 02 404 40° Honeycombs for SOFTLUX SLW440


Fluorescent Lamps 230 V: see relevant page

SL110/SGCF

SL220/SGCF

SL330/SGCF

SL440/SGCF

SLW220/SGCF

SLW440/SGCF

SWIVARM110/220

SL110/H20

SL110/H40

SL110/H60

SL220/H20

SL220/H40

SL220/H60

SL330/H20

SL330/H40

SL330/H60

SL440/H20

SL440/H40

SL440/H60

SLW220/DMX/H20

SLW220/DMX/H40

SLW220/DMX/H60

SLW440/DMX/H20

SLW440/DMX/H40

SLW440/DMX/H60

59


Accessories

Lamps

Code Description

2990.40.500

2990.40.505

G 9.5 Biplane Filament Halogen Lamps (for WARP)

230 V

230 V

800 W 3200 K 300 h

600 W 3200K 300 h

BP

BP

2990.40.205

2990.40.300

2990.40.305

2990.40.310

2990.40.458

GY 9.5 Halogen Lamps (for EUROSPOT / "A" Range)

230 V

230 V

230 V

230 V

230 V

300 W 2800 K 2000 h M

500 W 3200 K 150 h MP

500 W 3050 K 400 h

500 W 2900 K 2000 h

650 W 3050 K 400 h

BP

M

M

GX 9.5 Halogen Lamps (for EUROPE)

2990.40.470

2990.40.456

2990.40.603

2990.40.600

2990.40.625

230 V

230 V

230 V

230 V

230 V

650 W 3000 K 750 h

650 W 3200 K 100 h

1000 W 3050 K 750 h

1000W

1200W

3200K

3200K

200 h

200 h

BP

BP

BP

BP

BP

2990.40.800

GY 16 Halogen Lamp (for EUROPE)

230 V 2000 W 3200 K 400 h BP

2990.40.617

2990.40.618

G22 Halogen Lamp (for EUROPE 256 profiles)

230 V

230 V

2000 W 3200 K 400 h BP

2500 W 3200 K 400 h BP

2990.45.340

2990.45.400

2990.45.405

2990.45.450

R7S Halogen Lamps (for Soft & Fill Lights)

230 V

230 V

230 V

230 V

625 W 3200 K 200 h

1000 W 3000 K 2000 h

1000 W 3200 K 200 h

1250 W 3200 K 200 h

Reference

800W/G9.5/3200K

600W/G9.5/3200K

300W/GY9.5/2800K

500W/GY9.5/3200K

500W/GY9.5/3050K

500W/GY9.5/2900K

650W/GY9.5/3050K

650W/GX9.5/3000K

650W/GX9.5/3200K

1000W/GX9.5/3050K

1000W/GX9.5/3200K

1200W/GX9.5/3200K

2000W/G22/3200K

2000W/G22/3200K

2500W/G22/3200K

625W/R7S/3200K

1000W/R7S/3000K

1000W/R7S/3200K

1250W/R7S/3200K

2990.18.230

E40 Halogen Lamp (for SVOBODA)

24 V 250 W mirrored M.E40.250

2990.40.510

2990.40.515

2990.40.516

2990.40.517

G22 Metal Halide Lamps (for WARP/DL)

575 W 6000 K 1000 h 49,000 lm MSR/575/HR

575 W 6000 K 2000 h 46,000 lm MSD/575/HR

575 W 6000 K 750 h 49,000 lm HMI/575/SE

575 W 6000 K 1000 h 49,000 lm HMI/575/SEL

2990.40.508

GX9.5 Metal Halide Lamp (for WARP/DL/Rental)

575 W 7200 K 1000 h 49,000 lm MSR/575/2

60

2990.18.553 DULUX/L

2990.18.554

2990.18.551

2990.18.550

230 V Fluorescent Lamps (for SOFTLUX Cool Lights)

DULUX/L

STUDIOLINE

STUDIOLINE

55 W 3000 K 3000 lm

55 W 5400 K 3000 lm

55 W 3200 K 3800 lm

55 W 5600 K 3800 lm

Note:

STUDIOLINE lamps feature an excellent colour stability and a perfect compatibility with halogen and HMI sources.

DULL/55W/930

DULL/55W/954

STUD/55W/32

STUD/55W/56


Spotlight Accessories

Code Description

Gobo Holders

1000.40.045 For gobo type M for EUROSPOT

1000.40.065 Double for gobo type M for A59Z

1000.40.080 For gobo type A (Ø 100) with retention ring for EUROPE

1000.40.090 For gobo type B (Ø 85) for EUROPE

1000.40.100 Double gobo holder for WARP (rotating) type B

1000.40.120 Single gobo holder for WARP (non rotating) type B

SP/GO/EURO SP/A650 SP-GO/A SP-GO/B

Reference

SP/GO/EURO

SP/A650

SP-GO/A

SP-GO/B

SP/2GO/WARP

SP-GO/WARP

SP/2GO/WARP SP-GO/WARP

Iris Diaphragms

1000.19.645 Iris Diaphragm for DS/DW 54 spotlights

1000.19.200 Iris Diaphragm for A59 Z spotlight

1000.19.531 Iris Diaphragm Ø 75 for EUROPE range

1000.19.631 Iris Diaphragm Ø 80 for EUROPE range

1000.19.541 Iris Diaphragm Ø 80 with black-out for EUROPE range

1000.40.110 Combined iris and gobo holder for WARP (rotating) type B

OR/EURO

OR/A650

OR/75

OR/80

OR/80/BO

SP/OR-GO/WARP

OR/A650 OR/75 OR/80 OR/80/BO SP/OR-GO/WARP

61


Spotlight Accessories


General Accessories

1092.15.110 Low stand with Ø 4 x 11 mm assembly holes and M10 fixing nut S2

1092.10.505 Hook clamp for Ø 21 to 48 mm tubes, with M10 tapped hole and

M10 x 45 wing screw

1092.10.950 Hook clamp for Ø 34 to 60 mm tubes with DIN spigot adapter

A6

A8

1192.10.550 Hook clamp for Ø 35 to 50 mm tubes, equipped with one

M10 x 45 welded screw and one M10 wing nut


M10 x 35 wing screw


M10 x 35 wing screw

1092.10.600 Hook clamp for Ø 48 to 51 mm tubes, with clamping collar for WARP/M (2 required)

A20

A25

A30

A40


1092.00.094 0.75 m safety cable for CFN/185, CFN/245, CF/S10 and

CF/S20 barndoors

1092.00.093 1 m safety cable for CF/S50 barndoor

1092.20.315 DIN spigot

1092.20.601 DIN spigot adapter

CAS120/N

CAS/CF/75

CAS/CF/100

PIVOT DIN

DOUILLE DIN

S2 A6 A8 A20

A25 A30 A40

62

PIVOT DIN DOUILLE DIN


Code Description

Glyndebourne - Glyndebourne Opera House - United Kingdom

Reference


63

Code Description

BNTV - Domenica - BULGARIA

Reference

64


Your Partner for Light

Belgium N.V. ADB-TTV Technologies S.A.

Group Headquarters

Leuvensesteenweg 585

B-1930 Zaventem

Tel: +32 (0)2.709.32.11

Fax: +32 (0)2.709.32.80

E-Mail: [email protected]

France ADB S.A.S.

Sales Office

92, Avenue Jean Jaurès

F-92120 Montrouge

Tel: +33 (0)1.41.17.48.50

Fax: +33 (0)1.42.53.54.76


France ADB S.A.S.

Factory & Group Logistics Centre

Zone industrielle Rouvroy

F-02100 Saint-Quentin

Tel: +33 (0)3.23.06.35.70

Fax: +33 (0)3.23.67.66.56


www.adblighting.com


No results