Schneider Electric Wiser IP Camera Indoor - Device User Guide 26 Pages
Schneider Electric Wiser IP Camera Indoor - Device User Guide
Schneider Electric Wiser IP Camera Indoor - Device is a Wi-Fi® operated device that is used to monitor sensitive areas of your home. You can install the IP camera in all directions, e.g. at the ceiling or just put it on a table. The IP camera can be triggered by other devices. Below you will find brief product information:
- Camera: 1080P Full HD resolution camera with night vision
- Connectivity: Connects to your home Wi-Fi network (2.4 GHz)
- Motion detection: Detects motion and sends you notifications
- Two-way audio: Communicate with people or pets in the room
- Privacy mode: Covers the camera lens for added privacy
advertisement
Wiser IP Camera Indoor
Device user guide
Information about features and functionality of the devices.
02/2023
www.lk.dk
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished for informational use only. No part of this guide may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of
Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide or its content, except for a non-exclusive and personal license to consult it on an "as is" basis. Schneider Electric products and equipment should be installed, operated, serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational content of this material or consequences arising out of or resulting from the use of the information contained herein.
Table of Contents
Safety information
.......................................................................................4
Wiser IP Camera Indoor
............................................................................5
Changing the device icon ......................................................................7
Renaming the device ............................................................................7
Changing the device location .................................................................8
Configuring basic function settings .........................................................9
Configuring IR Night Vision ..................................................................10
Setting offline notification.....................................................................10
Using private mode .............................................................................12
Using patrol mode...............................................................................12
Detection Alarm Setting.......................................................................13
Storage settings..................................................................................16
Creating a moment .............................................................................17
Creating an automation .......................................................................19
Compliance information for Green Premium products ............................24
DUG_Wiser IPC_Indoor_LK-00 3
4
Safety information
Important information
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that accompany this symbol to avoid possible injury or death.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Failure to follow these instructions will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
DUG_Wiser IPC_Indoor_LK-00
Wiser IP Camera Indoor
550B1025
For your safety
RISK OF DAMAGE TO DEVICE
NOTICE
Always operate the product in compliance with the specified technical data.
Failure to follow these instructions can result in equipment damage.
About the device
The Wiser IP Camera Indoor (hereinafter referred to as IP Camera ) is a Wi-Fi ® operated device that is used to monitor sensitive areas of your home. You can install the IP camera in all directions, e.g. at the ceiling or just put it on a table. The
IP camera can be triggered by other devices.
NOTE: Users are solely responsible for adhering to applicable privacy laws, e.
g. the GDPR, Article 5. Users must ensure that guarantees are taken to avoid any misuse of equipment for surveillance or entirely different and unexpected purposes than intended.
Installing the device
Refer to the installation instruction supplied with this product.
See Wiser IP Camera Indoor.
Pairing the device
Using the Wiser app, pair IP camera with the local Wi-Fi network to register on cloud to access and control the device.
To pair the device:
1. On the Home page, tap + and tap .
DUG_Wiser IPC_Indoor_LK-00 5
2. Plug-in the power cable to power on the device.
6
Make sure that the LED blinks red.
3. Select Confirm that the LED is blinking red (A) and tap Start
Configuration .
Cancel EZ Mode
How to pair device
1. Plug-in the power cable to power on the device and observe that the LED is ON for a few seconds.
A
4. Select the Wi-Fi network , enter the Password (B) and tap Next .
NOTE: Make sure to first connect your mobile phone to the home Wi-Fi and select 2.4 GHz network.
Cancel
Select 2.4GHz Wi-Fi Network and enter Password.
If your Wi-Fi is 5GHz, please set it to be 2.4GHz.
Password
Next
B
DUG_Wiser IPC_Indoor_LK-00
5. Wait for a few seconds until the LED blinks green.
The green LED on the IP camera shows that it is successfully connected to the Wi-Fi network and ready to use.
6. Once the device is connected, tap Done .
Configuring the device
Changing the device icon
You can change the device icon using the Wiser app.
1. On the Home page, select the device for which you wish to change the icon.
2. At the top-right corner of the screen, tap .
3. Tap edit next to the device name.
4. Tap Icon to view the menu.
5. In the slide-up menu, select any one of the following (A) to change the device icon:
– Take photo - allows you to click a photo from the mobile camera.
– Select from Icon Library - allows you to select an icon from the app library.
– Select from Album - allows you to select a photo from the mobile gallery.
Icon
Name
Location
Take photo
Select from Icon Library
Select from album
Cancel
A
Renaming the device
You can rename the device using the Wiser app.
DUG_Wiser IPC_Indoor_LK-00 7
8
1. On the Home page, select the device for which you wish to rename.
2. At the top-right corner of the screen, tap .
3. Tap edit next to the device name.
4. Tap Name , enter the new name (A) and then tap Save .
Icon
Name
Location
Cancel
Rename
Save
A
Changing the device location
You can change the device location using the Wiser app.
1. On the Home page, select the device for which you wish to change the location.
2. At the top-right corner of the screen, tap .
3. Tap edit next to the device name.
4. Tap Location .
5. Select the desired location from the list (A) and then tap Save .
Device location
Living Room
Master Bedroom
Kitchen
Dining Room
Study Room
Kids Room
Save
A
DUG_Wiser IPC_Indoor_LK-00
Configuring basic function settings
Using the Wiser app, you can configure the following features:
C
D
Basic Function Settings
Flip Screen
A
B
Flip screen
Enabling the Flip Screen will turn the screen upside down on the live view on control panel.
To enable the flip screen:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap and tap Settings > Basic Function Settings .
3. Tap the toggle switch (A) to enable the Flip screen .
Time watermark
Enabling the Time Watermark displays the date and time on the live view on control panel.
To enable the time watermark:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap and tap Settings > Basic Function Settings .
3. Tap the toggle switch (B) to enable the Time Watermark .
Talk mode
Using the Talk mode, you can make one-way or two-way communication with the receiver.
Tap Talk Mode (C) and select one of the options:
– One-Way Communication : tap and hold to send a voice message, the other party can receive it and then reply to you with a voice message.
– Two-Way Intercom : you and the other party can talk at the same time.
Camera calibration
You can use Camera calibration feature to check if the camera is covering wider angle of the view.
Tap Camera Calibration (D) and confirm the calibration process.
DUG_Wiser IPC_Indoor_LK-00 9
NOTE: The IP camera will turn automatically during the process. It might take
25 seconds to do the calibration.
Configuring IR Night Vision
The infrared LEDs in the camera allows you to see and record a clear black and white video/image in the dark.
To configure the IR night vision:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap and tap Settings > IR Night Vision .
3. Select any one of the following:
– Auto : turns on/off automatically when the environmental light is below/ above a certain threshold of the lux level.
– Off : turns off the IR night vision at all times.
– On : turns on the IR night vision at all times.
IR night vision
Auto
On
Setting offline notification
Using the Wiser app, you can receive a notification when the IP camera is offline.
To turn on the offline notification:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap and tap Settings .
3. Tap the toggle switch (A) to turn on the Offline Notification and tap Confirm .
Settings
Basic Function Settings
IR Night Vision
Advanced Settings
Auto
On
Storage
Storage Settings
Recording
Recording Settings
A
Others
Share Device
10 DUG_Wiser IPC_Indoor_LK-00
Removing the device
Using the Wiser app, you can remove a device from the device list.
To remove the device:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap and tap Settings .
3. Tap Remove Device (A) and tap Confirm .
Settings
Advanced Settings
On
Storage
Storage Settings
Recording
Recording Settings
Others
Share Device
No updates available.
A
TIP: On the Home page, tap and hold the IP Camera Indoor to remove the device.
NOTE:
• Removing the device will reset the device. The LED starts blinking red indicating that the device is ready to pair with another network.
• If there is a problem while pairing, refer to
the device.
Using the device
Using the control panel of the IP Camera , you can see live video of the indoors on the display screen and includes the following features:
TIP: LED blinks green on the device indicating that the IP Camera is in use.
Enables audio of the live video
Makes the video fullscreen
Moves the camera in four directions (up, down, right, left)
Takes screenshot of the live view
Lets you communicate with a person near the device
Records the live view
DUG_Wiser IPC_Indoor_LK-00 11
NOTE:
• To view the saved screenshot/recording, tap > Album .
• To view the notification/alarm messages, tap > Message .
• To review the recordings using playback feature, refer to
.
Using private mode
The Private Mode allows you to turn off the live view, thereby disabling all the other features on the control panel for all users connected to the same Zigbee network. Using this mode, the user can stay confidential during private moments.
To turn on the private mode:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap > Settings .
3. Tap the toggle switch (A) to turn on the Private Mode .
Settings
Basic settings
Others
Share device
No updates available.
A
Using patrol mode
The patrol mode allows you to set up movements for camera to scan a large area by rotating the camera in a single continuous path automatically.
To turn on the patrol mode:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap > Settings .
12 DUG_Wiser IPC_Indoor_LK-00
3. Tap the toggle switch to turn on the Patrol Mode .
Settings
Basic Settings
Basic Function Settings
IR Night Vision
Advanced Settings
Storage
Storage Settings
Recording
Recording Settings
Auto
On
A
Detection Alarm Setting
The motion detection function enables the IP camera to detect motion in the surveillance area and display notifications in the Wiser app.
To enable the motion detection:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap and tap Settings > Detection Alarm Settings .
3. Tap the toggle switch (A) to turn on the Motion detection alarm .
Motion Detection
Motion
Motion Detection Alerts
B
Alert Sensitivity Level
A
High
C
Schedule
Alarm sensitivity level
Using the Wiser app, you can adjust the sensitivity level of your motion detector.
Tap Alarm Sensitivity Level (B) and select any of the following:
– Low
– Medium
– High
NOTE: The high sensitivity level detects the slightest movement and triggers an alarm.
DUG_Wiser IPC_Indoor_LK-00 13
Motion tracking
Enabling the Motion tracking allows the IP camera to detect the motion and automatically move the camera in the direction of the motion.
Tap the toggle switch (C) to enable the Motion tracking .
NOTE: The camera will only move in left and right directions.
Scheduling detection alarm
Using the Wiser app, you can add a schedule that allows you to turn off/on motion detection automatically based on your needs.
To schedule the motion detection:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap and tap Settings > Detection Alarm Settings > Schedule .
3. Tap Add schedule and set the time (A).
4. Tap Repeat (B) and select the days you want the schedule to repeat.
5. Tap Note (C), enter the note and tap Confirm .
6. Tap the toggle switch (D) to turn on the Notification for the schedule.
7. Tap Motion Detection (E), select one of the options:
– On : turns on the motion detection on the scheduled time.
– Off : turns off the motion detection on the scheduled time.
Add Schedule Save
A
09 43
10 44
11 45
B
C
Repeat
Note
Once
D
E where the device is located.
8. Tap Save .
Playback
Using the Wiser app, you can review the recording whenever you want with the
Playback feature.
NOTE: You need to insert a micro-SD card (max 128 GB) to use the playback feature. Refer instruction sheet.
The control panel of the playback consists of:
14 DUG_Wiser IPC_Indoor_LK-00
30 23:40 23:50
2021-09-16
00:00
00:10
00:20
00
Select the recording date and time
Click screenshot of the video
Pause/play the recording
/
Record the video
NOTE:
• A display screen on the control panel shows the previous recordings.
• The screenshot/recording will be saved in the album.
Recording Settings
To change the recording settings:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap and tap Settings > Recording Settings .
3. In the Recording Settings section, tap the toggle switch (A) to enable the
Local Recording .
NOTE: The recording will be saved to the micro-SD card.
4. Tap Recording Mode (B) and select one of the options:
NOTE: Recording Mode is enabled only when you turn on the Local
Recording toggle switch.
– Event Recording : records only when there is a motion detection.
– Non-Stop : records continuously for 24 hours.
Recording settings
A
B
Schedule
Non-stop
DUG_Wiser IPC_Indoor_LK-00 15
Scheduling playback
Using the Wiser app, you can add a schedule that allows you to turn off/on recording automatically based on your needs.
To schedule the recording:
1. On the Home page, tap All devices > IP Camera Indoor .
2. Tap and tap Settings > Recording Settings > Schedule .
3. Tap Add schedule and set the time (A).
4. Tap Repeat (B) and select the days you want the schedule to repeat.
5. Tap Note (C), enter the note and tap Confirm .
6. Tap the toggle switch (D) to turn on the Notification for the schedule.
7. Tap Local Recording (E), select one of the options:
– On : turns on the recording during the scheduled time.
– Off : turns off the recording during the scheduled time.
NOTE: The recording will be saved to the memory card.
Add Schedule Save
A
AM
PM
02 44
03 45
04 46
B
C
Repeat
Note
Once
D
E
Local Recording where the device is located.
On
8. Tap Save .
Storage settings
To change the recording settings:
1. On the Home page, tap All devices >.
2. Tap and tap Settings > Storage Settings .
3. In the Storage Settings section, tap Format (A) to format the inserted micro-
SD card.
IMPORTANT: This will delete all the data stored on the micro-SD card.
16 DUG_Wiser IPC_Indoor_LK-00
Storage settings
Total capacity
Used
3.71 GB
3.56 GB
0.15 GB
A
Creating a moment
A Moment allows you to group multiple actions that are usually done together.
Using the Wiser app, you can create moments based on your needs (such as movie night).
To create a moment:
1. On the Home page, tap .
2. Go to Moment > + to create a moment.
3. Tap Edit name , enter the name of the moment (A) and tap Save .
TIP : You can choose the cover image that best represents your moment by tapping .
Edit name
A
Cancel
Edit name
Add Task
Save
4. In the Action section, tap Add task (B) to open the slide-up menu.
DUG_Wiser IPC_Indoor_LK-00 17
5. In the Add task menu, you can do either or all of the following actions (C):
– Run the device : select the devices that you want in a moment.
– Select Automation : select the automation that you want to enable or disable. For more info refer to
– Delay : set the delay time.
NOTE : You can add one or more actions using .
My settings
Show on Home Page Add task
Select Automation
Delay
B
C
6. Tap Run the device > IP Camera Indoor to select either or all of the functions to add in the moment:
– Private Mode : turn on/off the private mode (D).
– Recording : turn on/off the recording (E).
– Mode : select the type of recording (F).
– Auto-patrol Switch : turn on/off the patrol mode (G).
Select function
D
E
F
G
Private Mode
Recording
Mode
Auto-patrol Switch
Next
7. Once all the actions are set, tap Save .
Editing a moment
To edit a moment:
1. On the Moment tab, locate the moment you want to edit and tap .
2. On the Edit page, you can tap each item (such as dimmer, shutter, delay, temperature, etc.) to change the settings.
TIP:
• You can add one or more actions using .
• To delete an existing action, slide the each item towards left and tap
Delete .
18 DUG_Wiser IPC_Indoor_LK-00
Deleting a moment
To delete a moment:
1. On the Moment tab, locate the moment that you want to delete and then tap
.
2. Tap Delete and tap Ok .
NOTE: After deleting a moment, the device action can no longer be triggered.
Creating an automation
An automation allows you to group multiple actions that are usually done together, triggered automatically or at scheduled times. By using the Wiser app, you can create automations based on your needs.
To create an automation:
1. On the Home page, tap the .
2. Go to Automation > + to create an automation.
3. Tap Edit name , enter the name of the automation (A) and tap Save .
TIP : You can choose the cover image that best represents your automation by tapping .
My Automation
A
Cancel
Add Condition
4. Tap Any condition is met to select any one of the condition type (B):
– All conditions are met : the automation is triggered when all the conditions are met.
– Any condition is met : the automation is triggered when at least one condition is met.
My Automation
DUG_Wiser IPC_Indoor_LK-00
Select Condition type
All conditions are met
Any condition is met
Cancel
B
5. Tap Add Condition to open the slide-up menu.
19
20
6. In the Add Condition menu, you can do either or all of the following options
(C):
– When weather changes : select the various weather settings.
– Schedule : set the time and day.
– When device status changes : select the device and it’s function.
NOTE: You can add one or more conditions using .
My Automation
Schedule
Add Condition
C
7. Tap Add task to open the slide-up menu.
8. In the Add task menu, you can do either or all of the following options (D):
– Run the device : select the devices that you want to be triggered.
– Moment or Automation : select the moment which you want to trigger or select the automation that you want to enable or disable.
– Send notification : turn on notification for the automation.
– Delay : set the delay time.
NOTE : You can add one or more actions using .
My Automation
Action
Add task
All-Day
D
DUG_Wiser IPC_Indoor_LK-00
9. Tap on Effective period to set the time range for the automation. You can select any one of the following (E):
– All-day : 24 hours
– Daytime : From sunrise to sunset
– Night : From sunset to sunrise
– Custom : User defined time period
Next
All-day
24 hours
E
Repeat
City
10. Once all the actions and conditions are set, tap Save .
Once the automation is saved, it is visible on the Automation tab. You can tap the toggle switch to enable/disable.
Example of an automation
This demonstration shows you how to create an automation to turn on the Autopatrol mode when the window/door is open.
1. Go to Automation > + to create an automation.
2. Tap Edit name , enter the name of the automation and tap Save .
TIP : You can choose the cover image that best represents your automation by tapping .
3. Tap Add Condition > When device status changes > Window Door
Sensor > Open .
4. Tap Add task > Run the device > IP Camera Indoor > Auto-patrol Switch .
5. Select On > Save > Next .
On
Auto-patrol Switch
Cancel Save
DUG_Wiser IPC_Indoor_LK-00 21
6. In the Automation Settings page, tap Save .
Cancel Automation Settings Save
Edit name
Any condition is met
Window Door Sensor
Window Door Sensor:Open
(1/10)
Action (1/80)
Auto-patrol Switch:On
All-Day
Once the automation is saved, it is visible on the Automation tab. You can tap the toggle switch on the automation to enable/disable it.
Editing an automation
To edit an automation:
1. On the Automation tab, locate the automation you want to edit and tap .
2. On the Edit page, you can tap each item (such as dimmer, shutter, delay, temperature, etc.) to change the settings.
TIP:
• You can add one or more actions using .
• To delete an existing condition or action, slide each item towards left and tap Delete .
Deleting an automation
To delete an automation:
1. On the Automation tab, locate the automation that you want to delete and then tap .
2. Tap Delete and tap Ok .
NOTE: After deleting an automation, the device action can no longer be triggered.
LED Indication
User Action
Plug-in the power cable to power on the device
During the pairing process
When the pairing process is complete
While viewing live view on the control panel
LED Indication
22 DUG_Wiser IPC_Indoor_LK-00
Troubleshooting
Error
The device is not ready to pair after the device is removed from the app.
Possible cause
The device is not reset correctly.
The device does not respond.
Wrong Wi-Fi credentials are entered during the pairing process.
NOTE: You must log into 2.4 GHz network.
Solution
Long press the reset button for 3 seconds located on the back of the device to reset the device.
Technical Data
Nominal voltage
Power supply
Power consumption
Ambient temperature
Operating humidity
Operating frequency
Max. radio-frequency power transmitted
Wi-Fi ® standard
Wi-Fi ® security
Channel bandwidth
Data security
Resolution
Wide angle lens
IR range
Pan angle
Tilt angle
Local storage support
AC 100–240 V, 50/60 Hz
DC 5 V, 2 A max. 10 W
-10 °C to 45°C
< 95% RH
2405 – 2480 MHz
< 100 mW
IEEE 802.11 b/g/n 2.4 GHz
WPA-PSK/WPA2–PSK
Support 20/40 MHz
AES128
1080p
80° horizontally
40° vertically
7 m
0° to 340°
-75° to 75°
Micro SD card, max. 128 GB
SDHC and SDXC type micro-SD cards with FAT32 format are supported
DUG_Wiser IPC_Indoor_LK-00 23
Compliance
Compliance information for Green Premium products
Find and download comprehensive information about Green Premium products, including RoHS compliance and REACH declarations as well as Product
Environmental Profile (PEP) and End-of-Life instructions (EOLI).
General information about Green Premium products
Click the link below to read about Schneider Electric’s Green Premium product strategy.
https://www.schneider-electric.com/en/work/support/green-premium/
Find compliance information for a Green Premium product
Click the link below to search for a product’s compliance information (RoHS,
REACH, PEP and EOLI).
NOTE: You will need the product reference number or product range to perform the search.
https://www.reach.schneider-electric.com/CheckProduct.aspx?cskey= ot7n66yt63o1xblflyfj
Trademarks
This guide makes reference to system and brand names that are trademarks of their relevant owners.
• Apple ® and App Store ® are brand names or registered trademarks of Apple
Inc.
• Google Play™ Store and Android™ are brand names or registered trademarks of Google Inc.
• Wi-Fi ® is a registered trademark of Wi-Fi Alliance ® .
• Wiser™ is a trademark and the property of Schneider Electric, its subsidiaries and affiliated companies.
Other brands and registered trademarks are the property of their respective owners.
24 DUG_Wiser IPC_Indoor_LK-00
Schneider Electric Danmark A/S
Lautrupvang 1, 2750 Ballerup
Danmark
+45 88 30 20 00 www.lk.dk
As standards, specifications, and design change from time to time, please ask for confirmation of the information given in this publication.
© 2023 – Schneider Electric . All rights reserved.
DUG_Wiser IPC_Indoor_LK-00
Printed in:
Schneider Electric
Lautrupvang 1
2750 Ballerup
Denmark
+45 88 30 20 00
advertisement