Belden | 943 981-001 | Hirschmann BAT-ANT-N-LC-G-50m-IP65 | Hirschmann BAT-F X2 | Hirschmann BAT-ANT-N-3AGN-F | 943 981-010 | Hirschmann BAT-CLB-5 N | 943 903-515 | 943 903-360 | Hirschmann BAT-CLB-2 N | Manual | Wireless LAN: Antennas of the BAT family

Add to my manuals
68 Pages

advertisement

Belden | 943 981-001 | Hirschmann BAT-ANT-N-LC-G-50m-IP65 | Hirschmann BAT-F X2 | Hirschmann BAT-ANT-N-3AGN-F | 943 981-010 | Hirschmann BAT-CLB-5 N | 943 903-515 | 943 903-360 | Hirschmann BAT-CLB-2 N | Manual | Wireless LAN: Antennas of the BAT family | Manualzz

Antenna Guide

Wireless LAN

Antennas of the BAT family

BAT Antenna Guide BAT

Release 09 05/2015

Technical Support https://hirschmann-support.belden.eu.com

The naming of copyrighted trademarks in this manual, even when not specially indicated, should not be taken to mean that these names may be considered as free in the sense of the trademark and tradename protection law and hence that they may be freely used by anyone.

© 2015 Hirschmann Automation and Control GmbH

Manuals and software are protected by copyright. All rights reserved. The copying, reproduction, translation, conversion into any electronic medium or machine scannable form is not permitted, either in whole or in part. An exception is the preparation of a backup copy of the software for your own use. For devices with embedded software, the end-user license agreement on the enclosed CD/DVD applies.

The performance features described here are binding only if they have been expressly agreed when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right to change the contents of this document without prior notice. Hirschmann can give no guarantee in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network components or the associated operating software. In addition, we refer to the conditions of use specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(www.hirschmann.com).

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

BAT Antenna Guide 11.05.2015

Contents

1

2

Introduction

Current BAT portfolio

AP / Cable / Antenna assembly

3 Antenna Selection Criteria

4 External antennas

4.1

Legal regulations for operation external antennas

4.1.1 Relevant for use in the USA and in Canada:FCC

compliant antennas

4.1.2 Relevant for use in Japan:

4.2

Omni-Directional Antennas

4.2.1 Omni-Directional Antenna for 2.4 GHz band

4.2.2 Omnidirectional antenna for 5 GHz band

4.2.3 Omnidirectional Antenna for 2.4 and 5 GHz band

4.2.4 Omni-directional dual-band antennae for MiMo for

the 2.4 GHz and 5 GHz bands

4.2.5 Dual band Hemispherical Antenna for 2.4 and 5 GHz

band

4.3

Sector Antennas

4.3.1 Directional antenna for the 2.4 GHz band with 8 dBi

gain

4.3.2 Polarization-diversity antenna for 5 GHz band, linear

4.3.3 Sectoral MiMoantenna for 5 GHz band

4.4

Directional Antennas

4.4.1 Directional antenna for the 2.4 GHz band with 14 dBi

gain

4.4.2 Directional antenna for 5 GHz band with 18 dBi gain

4.4.3 Directional antenna for 5 GHz band with a gain of

23 dBi

4.4.4 Directional antenna for 5 GHz band with 18 dBi gain

4.5

Radiating Cable Antennas (Leaky Cable)

4.5.1 Leaky Cable for 2.4 GHz; black

5

6

8

9

14

14

14

19

21

21

22

24

30

31

34

34

36

38

40

40

43

46

48

51

51

BAT Antenna Guide BAT

Release 09 05/2015

3

5

A

B

C

D

Cables/Adapter

Explanation of passive

antennas in explosive hazard areas

Antenna diagrams

Index

Further Support

55

61

62

66

67

4

BAT Antenna Guide BAT

Release 09 05/2015

Introduction

Since 2004, Hirschmann Automation and Control GmbH has provided a continually expanding product portfolio relating to WLAN.

Our product portfolio comprises the following integral WLAN network elements:

 active devices such as access points, and clients

 passive components such as cables, antennas, and overvoltage protectors

With our product portfolio, we focus on a high industrial suitability. In order to improve our products, in particular with regard to vibration resistance, grounding behavior, impermeability and emission behavior, we have further developed our antenna portfolio.

You benefit from the following modifications of our antenna portfolio:

All antennas comply with the IP65 degree of protection for a high industrial suitability. The sole exception to this is the BAT-ANT-N-14G-

IP23 antenna.

 The emission behavior of the new antennas is more homogeneous, with improved transmit and receive power during operation.

The new antennas, equipped with N sockets, allow you to connect the antennas easily and quickly with other cables and overvoltage protectors.

The scope of delivery comprises a complete solution, with the antenna, 1 yard of cable, and the pigtail included. The complete solution allows you to immediately connect the antenna to the BAT-C, BAT-F, BAT-R, and

BAT300-Rail.

You obtain every antenna with mounting material which is vibration resistant, weatherproof, and sturdy.

We continually improve our product portfolio and include in the portfolio

WLAN technology innovations. As a result, our portfolio is subject to short term changes. Check regularly for updates of our portfolio by visiting the

Hirschmann product pages (www.hirschmann.com).

BAT Antenna Guide BAT

Release 09 05/2015

5

1 Current BAT portfolio

In the following you get an overview of our devices. You also obtain information on which WLAN standards the devices support.

 The products of the BAT300 family support the WLAN standards

IEEE 802.11a/b/g/h and 802.11n and can be operated with a gross data rate of up to 300 MBit/s.

The products of the OpenBAT family support the IEEE 802.11a/b/g/h/n

WLAN standards and can be operated with a gross data rate of up to

450 MBit/s.

 The BAT-C products support the WLAN standards IEEE 802.11a/b/g/h/n and can be operated with a gross data rate of up to 65 MBit/s.

6

BAT Antenna Guide BAT

Release 09 05/2015

BAT300-Rail

The devices are supplied in metal enclosures for mounting on DIN rails in automation or vehicle applications.

BAT300-F

The devices are supplied in IP65/67 metal housings. They are designed for fieldlevel applications or harsh industrial environments.

BAT300-Rail BAT300-F

BAT-F X2

The devices are supplied with stainless steel covers. They are designed for hazardous environments and are approved for ATEX zone 2.

BAT-F X2

BAT-F

The devices are supplied in a metal housing that can be fastened to DIN rails using automation technology. They provide impressive flexibility and high speeds.

BAT-F

BAT-R

The devices are supplied in a metal housing that can be fastened to DIN rails using automation technology. They provide impressive flexibility and high speeds.

BAT-R

BAT-C

The devices are supplied with an IP67 aluminum housing.

They are suitable for use in an industrial environment.

BAT-C

Table 1: BAT-Family: Overview

For further information, see the installation user manual for the corresponding device.

2 AP / Cable / Antenna assembly

Access Point

Pigtail

Optional

Protector

Optional

Cable

(2 m, 5 m, 15 m /

6.56. ft, 16.4 ft, 49.2 ft)

Cable

1 m

1 × – 3 ×

1 × – 3 ×

1 × – 3 ×

Linear antenna

BAT300-F /

BAT-F /

BAT-C

Dual Slant antenna

1 × – 3 ×

1 × – 3 ×

1 × – 3 ×

BAT300-Rail /

BAT-R

MiMo antenna

f-m f-m f-m m-f

As every antenna set includes 1 yard of antenna cable and a pigtail, you have the option of immediately connecting both AP types BAT-F / BAT300-F/ BAT-

C, and BAT-R/ BAT300-Rail to the antennas.

The BAT Protector can be screwed onto the BAT-F/ BAT300-F/ BAT-C directly, or be connected between two cables, as it is equipped with a plug and a socket.

8

BAT Antenna Guide BAT

Release 09 05/2015

3 Antenna Selection Criteria

Take into account the national regulations that apply to the operation of antennas before considering any other criteria.

See “Legal regulations for operation external antennas” on page 14.

Note: Hirschmann recommends that you perform an on-site inspection and an analysis to prepare for the installation of a WLAN.

Typical antenna ranges, based on the frequency range and the antenna type:

Frequency range: 2.4 GHz

– Short range: up to 218 yards (200 m) with omnidirectional antennas.

– Medium range: up to 0.62 miles (1 km) with sector antennas.

– Long range: up to 3.11 miles (5 km) with directional antennas.

Frequency range: 5 GHz

– Short range: up to 328 yards (300 m) with omnidirectional antennas.

– Medium range: up to 1.86 miles (3 km) with sector antennas.

– Long range: up to 9.32 miles (15 km) with directional antennas.

The typical ranges provide orientation for the first-time antenna selection.

The actual antenna range depends on several factors such as output power, line of sight, and interference.

In the following table you find antenna descriptions. Together with the above described typical ranges, the descriptions provide orientation for the first-time antenna selection.

BAT Antenna Guide BAT

Release 09 05/2015

9

Art.-No

943 981-002

Antenna

BAT-ANT-N-6G-IP65

943 981-003 BAT-ANT-N-5A-IP65

942 110-001 BAT-ANT-N-3AGN-IP67

942 047-001 BAT-ANT-N-3AGN-F

Description

Omnidirectional antenna for

2.4 GHz band

BAT-C

+++

Omnidirectional antenna for

5 GHz band

+++

Omnidirectional antenna for

2.4 GHz band and

5 GHz band

+++

Omnidirectional antenna for

2.4 GHz band and

5 GHz band

+++

BAT300 family

BAT300-

Rail

OpenBAT family

BAT300-F BAT-R BAT-F

+ + + +

+

-

-

+

+

+

+

-

-

+

+

+

Table 2: +++ very good; ++ good; + possible; – cannot be used; nr = not relevant

Whether an antenna is actually suitable depends on the application case.

Art.-No

942 046-001

Antenna

BAT-ANT-RSMA-2AGN-

R

Description BAT-C

Omnidirectional antenna for

2.4 GHz band and

5 GHz band

-

BAT300 family

BAT300-

Rail

+

OpenBAT family

BAT300-F BAT-R

+

BAT-F

-

943 981-004

943 981-005

943 981-006

943 981-007

943 981-008

BAT-ANT-N-6ABG-IP65

BAT-ANT-N-14G-IP23

BAT-ANT-N-18A-V-IP65

BAT-ANT-N-23A-V-IP65

BAT-ANT-N-23A-VH-

IP65

Hemispherical antenna for

2.4 GHz band and 5

GHz band

+++

Directional antenna for 2.4 GHz band with 14 dBi gain

-

Directional antenna for 5 GHz band with

18 dBi gain

-

Directional antenna for 5 GHz band with a high gain of 23 dBi

-

Directional antenna for 5 GHz band with a high gain of 23 dBi

-

Table 2: +++ very good; ++ good; + possible; – cannot be used; nr = not relevant

Whether an antenna is actually suitable depends on the application case.

+

+

++

+

+++

+

+

++

+

+++

+

+

++

+

+++

+

+

++

+

+++

Art.-No

943 981-014

Antenna

BAT-ANT-N-MiMo-18N-

IP65

Description BAT-C

Directional antenna for 5 GHz band with

18 dBi gain

-

BAT300 family

BAT300-

Rail

OpenBAT family

BAT300-F BAT-R BAT-F

+++ +++ +++ +++

++ ++ ++ 943 981-009

943 981-010

943 981-012

943 981-013

BAT-ANT-N-8G-DS-IP65

BAT-ANT-N-9A-DS-IP65

BAT-ANT-N-MiMoDB-

5N-IP65

BAT-ANT-N-MiMo5-9N-

IP65

Polarizationdiversity antenna for 2.4 GHz band, linear

Polarizationdiversity antenna for 5 GHz band, linear

-

-

Omni-directional dual-band antenna for MiMo for the

2.4 GHz and 5 GHz bands

Sectoral

MiMoantenna for

5 GHz band

-

-

++

++

-

+++

943 981-001 BAT-ANT-N-LC-G-50m-

IP65

Leaky wave conductor for

2.4 GHz, black,

50m

+++

Table 2: +++ very good; ++ good; + possible; – cannot be used; nr = not relevant

Whether an antenna is actually suitable depends on the application case.

+++

++

+++

+++

+++

++

+++

+++

+++

++

+++

+++

+++

Art.-No

943 981-101

Antenna

BAT-ANT-N-LC-G-100m-

IP65

943 903-373 BAT-ANT-Protector m-f

Description

Leaky wave conductor for

2.4 GHz, black,

100m

Overvoltage

Protector

BAT-C

+++

+++

BAT300 family

BAT300-

Rail

+++

OpenBAT family

BAT300-F BAT-R

+++ +++

BAT-F

+++

+++ +++ +++ +++

+++

-

+++

+++

+++

-

943 903-374

943 903-360

943 903-514

943 903-516

943 903-515

BAT-LAN-Protector IP68

BAT-Pigtail

BAT-CLB-2 N m-f

BAT-CLB-5 N m-f

BAT-CLB-15 N m-f

Surge Arrestor

LAN/PoE

+++

Adapter cable

(N socket/RP-SMA plug) nr

Antenna Cable

N-Plug to N-Jack

2 m (6.56 ft)

+++

Antenna Cable

N-Plug to N-Jack

5 m (16.40 ft)

Antenna Cable

N-Plug to N-Jack

15 m (49.21 ft)

+++

+++

Table 2: +++ very good; ++ good; + possible; – cannot be used; nr = not relevant

Whether an antenna is actually suitable depends on the application case.

+++

+++

+++

+++

+++

+++

+++

+++

+++

+++

+++

+++

+++

+++

4 External antennas

This chapter is structured as follows:

“Legal regulations for operation external antennas” on page 14

“Omni-Directional Antennas” on page 21

“Sector Antennas” on page 34

“Directional Antennas” on page 40

“Radiating Cable Antennas (Leaky Cable)” on page 51

4.1

Legal regulations for operation external antennas

You find additional information on approvals, certifications, and selfdeclarations in the Installation user manuals for the devices.

Before operating the antennas, refer to the “Safety instructions” chapter in the Installation user manual for your device or devices.

4.1.1

Relevant for use in the USA and in Canada:

FCC compliant antennas

For the operation of the OpenBAT devices in the USA and in Canada— characteristic value US for country approvals—you require a permit for the operation of antennas. If the operation of a specific antenna is legal depends on the frequency band and the WLAN module used. The following tables provide you an overview of the approved antennas.

14

BAT Antenna Guide BAT

Release 09 05/2015

Art.-No

942 046-

001

Antennas operating with this device model:

BAT-ANT-RSMA-2AGN-R

942 110-

001

BAT-ANT-N-3AGN-IP67

Description

Omnidirectional antenna for

2.4 GHz band and

5 GHz band

Permitted band of operation

2.4 GHz band 5.15 GHz ...

5.25 GHz band

Yes Yes

5.725 GHz ...

5.825 GHz band

Yes

Omnidirectional antenna for

2.4 GHz band and

5 GHz band

Yes Yes

943 981-

012

BAT-ANT-N-MiMoDB-5N-IP65 Omni-directional dual-band antenna for MiMo for the

2.4 GHz and 5 GHz bands

Yes

Table 3: This table applies exclusively to OpenBAT devices that are labeled as follows:

Contains Transmitter Module

FCC ID: U99EWLAN1

IC: 4019A-EWLAN1

Yes

Yes

Yes

Art.-No

943 981-

013

Antennas operating with this device model:

BAT-ANT-N-MiMo5-9N-IP65

Description

Sectoral

MiMoantenna for

5 GHz band

Permitted band of operation

2.4 GHz band 5.15 GHz ...

5.25 GHz band

No Yes

943 981-

009

BAT-ANT-N-8G-DS-IP65 Polarizationdiversity antenna for 2.4 GHz band, linear

Yes

Table 3: This table applies exclusively to OpenBAT devices that are labeled as follows:

Contains Transmitter Module

FCC ID: U99EWLAN1

IC: 4019A-EWLAN1

No

5.725 GHz ...

5.825 GHz band

Yes

No

The use of antennas missing in this list is strictly prohibited. The required antenna impedance is 50 ohms.

Art.-No

942 046-001

Antennas operating with this device model:

BAT-ANT-RSMA-2AGN-R

942 110-001 BAT-ANT-N-3AGN-IP67

Description

Omnidirectional antenna for

2.4 GHz band and

5 GHz band

Permitted band of operation

2.4 GHz band 5.15 GHz ...

5.25 GHz band

Yes Yes

5.725 GHz ... 5.825

GHz band

Yes

Omnidirectional antenna for

2.4 GHz band and

5 GHz band

Yes

943 981-012

943 981-013

BAT-ANT-N-MiMoDB-5N-

IP65

BAT-ANT-N-MiMo5-9N-IP65

Omni-directional dual-band antenna for MiMo for the

2.4 GHz and 5 GHz bands

Sectoral

MiMoantenna for

5 GHz band

Yes

No

Table 4: This table applies exclusively to OpenBAT devices that are labeled as follows:

Contains Transmitter Module

FCC ID: U99EWLAN2

IC: 4019A-EWLAN2

Yes

Yes

Yes

Yes

Yes

Yes

Art.-No

943 981-009

Antennas operating with this device model:

BAT-ANT-N-8G-DS-IP65

943 981-014 BAT-ANT-N-MiMo-18N-IP65

Description

Polarizationdiversity antenna for 2.4 GHz band, linear

Directional antenna for 5 GHz band with

18 dBi gain

No

Permitted band of operation

2.4 GHz band 5.15 GHz ...

5.25 GHz band

Yes No

No

5.725 GHz ... 5.825

GHz band

No

Yes

Table 4: This table applies exclusively to OpenBAT devices that are labeled as follows:

Contains Transmitter Module

FCC ID: U99EWLAN2

IC: 4019A-EWLAN2

The use of antennas missing in this list is strictly prohibited. The required antenna impedance is 50 ohms.

4.1.2

Relevant for use in Japan:

The following table applies to OpenBAT variants with the characteristic value JP (Japan) that are labeled as follows:

 "Contains MIC ID: 204-310014"

 "5GHz band:

この製品は屋内においてのみ使用可能です "

Art.-No

942 110-

001

Antennas operating with this device model:

BAT-ANT-N-

3AGN-IP67

Description

Omnidirectional antenna for

2.4 GHz band and

5 GHz band

Ja

Permitted band of operation

2.4 GHz band

5 GHz band

Ja

942 046-

001

BAT-ANT-

RSMA-2AGN-

R

Omnidirectional antenna for

2.4 GHz band and

5 GHz band

Ja Ja

943 981-

004

BAT-ANT-N-

6ABG-IP65

943 981-

012

BAT-ANT-N-

MiMoDB-5N-

IP65

943 981-

009

BAT-ANT-N-

8G-DS-IP65

943 981-

010

BAT-ANT-N-

9A-DS-IP65

943 981-

002

BAT-ANT-N-

6G-IP65

Hemispherical antenna for

2.4 GHz band and 5

GHz band

Ja

Omni-directional dual-band antenna for MiMo for the

2.4 GHz and 5 GHz bands

Polarizationdiversity antenna for 2.4 GHz band, linear

Ja

Ja

Polarizationdiversity antenna for 5 GHz band, linear

Omnidirectional antenna for

2.4 GHz band

Nein

Ja

Ja

Ja

Nein

Ja

Nein

BAT Antenna Guide BAT

Release 09 05/2015

19

Art.-No

943 981-

003

Antennas operating with this device model:

BAT-ANT-N-

5A-IP65

943 981-

013

BAT-ANT-N-

MiMo5-9N-

IP65

Description

Omnidirectional antenna for

5 GHz band

Nein

Sectoral

MiMoantenna for

5 GHz band

Nein

Permitted band of operation

2.4 GHz band

5 GHz band

Ja

Ja

Using antennas that are not on this list is prohibited. The 5 GHz band is restricted to indoor usage.

20

BAT Antenna Guide BAT

Release 09 05/2015

4.2

Omni-Directional Antennas

4.2.1

Omni-Directional Antenna for 2.4 GHz band

BAT-ANT-N-6G-IP65

Order Number: 943 981-002

Radiation Pattern

Horizontal 2,400 MHz Vertical 2,400 MHz

Frequency range

Gain

VSWR (voltage standing wave ratio)

Polarization

HPBW (half power bandwidth)

2400 MHz ... 2500 MHz

6.0 dBi

< 1.8

Linear, vertical horizontal 360°

Downtilt 0°

Max. Power 25 W

Impedance

Connector

50 Ω

N female

Table 5: Electrical Specification

BAT Antenna Guide BAT

Release 09 05/2015

21

Temperature

Radome color

Radome material

−40 °F ... 176 °F (−40 °C ... +80 °C)

Grey-white

Fiber glass

Dimensions

Protection class

ø 0.87 in × 9.84 in (ø 22 mm × 250 mm)

IP65

Table 6: Environmental & Mechanical Characteristics

3.28 ft (1 m ) with N male connectors at both ends.

Pigtail, R-SMA male to N female

Mounting material

Table 7: Cable and Accessories

4.2.2

Omnidirectional antenna for 5 GHz band

BAT-ANT-N-5A-IP65

Order Number: 943 981-003

Radiation Pattern horizontal 5470 MHz vertical 5470 MHz

22

BAT Antenna Guide BAT

Release 09 05/2015

Frequency range

Gain

VSWR (voltage standing wave ratio)

Polarization

HPBW (half power bandwidth)

HPBW (half power bandwidth)

Max. Power

Impedance

Connector

Table 8: Electrical Specification

5150 MHz ... 5875 MHz

5 dBi

1.5

Linear, vertical horizontal 360° vertical 25°

6 W

50 Ω

N female

Temperature

Radome color

Radome material

−49 °F ... +158 °F (−45 °C ... +70 °C)

Grey-white

Polypropylene

Dimensions

Protection class

0.63 in. × 6.30 in. (16 mm × 160 mm)

IP65

Table 9: Environmental & Mechanical Characteristics

3.28 ft (1 m ) with N male connectors at both ends.

Pigtail, R-SMA male to N female

Mounting material

Table 10: Cable and Accessories

BAT Antenna Guide BAT

Release 09 05/2015

23

4.2.3

Omnidirectional Antenna for 2.4 and 5 GHz band

BAT-ANT-N-3AGN-IP67

Order number: 942 110-001 (10 pcs.)

Ø 12.9

Ø 0.50

mm inch

Ø 12.9

Ø 0.50

Ø 20

Ø 0.79

Radiation Pattern horizontal

2.4 GHz

-20

-10

0

10

-10

-20

10

0

150

180

210

120

240

90

270

60

30

H_Plane

2400

2450

2500

300

330

0 horizontal

5 GHz

-20

-10

0

10

-10

-20

10

0

150

180

210

120

240

90

270

60

30

0

H_Plane

5150

5250

5350

5450

5550

5650

5750

5850

300

330

24

BAT Antenna Guide BAT

Release 09 05/2015

vertical

2.4 GHz

-20

-10

0

10

10

0

-10

-20

150

180

210

120

240

90

270

60

30

E_Plane

2400

2450

2500

300

330

0 vertical

5 GHz

-20

-10

0

10

10

0

-10

-20

150

180

210

120

240

90

270

60

30

0

E_Plane

5150

5250

5350

5450

5550

5650

5750

5850

300

330

Frequency range

Gain

VSWR (voltage standing wave ratio)

Impedance

Connector

2400 MHz ... 2485 MHz

Polarization Linear, vertical

HPBW (half power bandwidth) horizontal 360°

HPBW (half power bandwidth) vertical 30°

Max. Power 2 W

50 Ω

N-type male

5150 MHz ... 5850 MHz

2.0 dBi 2.0 dBi

≤2.0

vertical 15°

Table 11: Electrical Specification

Temperature

Radome color

Radome material

−40 °F ... +185 °F (−40 °C ... +85 °C)

Black

PC

Dimensions

Protection class

0.79 in. × 3.15 in. (20 mm × 80 mm)

IP65 / IP67

Table 12: Environmental & Mechanical Characteristics

BAT Antenna Guide BAT

Release 09 05/2015

25

BAT-ANT-N-3AGN-F

Order Number: 942 047-001 (10 pcs.)

The antenna is supplied with all BAT-F and BAT-C devices.

mm inch

22

0.87

The antenna is directly screwed on the BAT.

Radiation Pattern

Horizontal 2,400 MHz Horizontal 5,000 MHz

26

BAT Antenna Guide BAT

Release 09 05/2015

Vertical 2,400 MHz Vertical 5,000 MHz

Frequency range

Gain

VSWR (voltage standing wave ratio)

Polarization

2400 MHz - 2500 MHz

2.5 dBi

2.0

Linear, vertical

HPBW (half power bandwidth) horizontal 360°

HPBW (half power bandwidth) vertical 30°

Max. Power 2 W

Impedance

Connector

50 Ω

N-type male

Table 13: Electrical Specification

5150 MHz ... 5875 MHz

5.0 dBi vertical 15°

Temperature

Radome color

Radome material

−40 °F ... +158 °F (−40 °C ... +70 °C)

Grey-white

ABS

Dimensions

Protection class

22 mm x 183 mm (0.87 in x 7.20 in)

IP65

Table 14: Environmental & Mechanical Characteristics

Note: The antenna BAT-ANT-N-3AGN-F is specified solely for usage with the WLAN Client BAT-C in the regions EU, USA and Canada.

BAT Antenna Guide BAT

Release 09 05/2015

27

BAT-ANT-RSMA-2AGN-R

Order Number: 942 046-001 (10 pcs.)

21.2

0.83

mm inch

Radiation Pattern horizontal 2450 MHz

90° vertical 2450 MHz horizontal 5250 MHz

28 vertical 5250 MHz

BAT Antenna Guide BAT

Release 09 05/2015

horizontal 5750 MHz vertical 5750 MHz

Frequency range

Gain

2400 MHz

3 dBi

2.0

VSWR (voltage standing wave ratio)

Polarization Linear, vertical

HPBW (half power bandwidth) horizontal 360°

HPBW (half power bandwidth) vertical 30°

Impedance

Connector

50 Ω

Reverse-SMA male

Table 15: Electrical Specification

5250 MHz and 5750 MHz

5 dBi vertical 15°

Temperature

Radome color

Radome material

−4 °F ... +149 °F (−20 °C ... +65 °C)

Black

PC/PU

Dimensions 0.83 in × 6.3 in (21 mm × 160 mm)

Table 16: Environmental & Mechanical Characteristics

BAT Antenna Guide BAT

Release 09 05/2015

29

4.2.4

Omni-directional dual-band antennae for MiMo for the

2.4 GHz and 5 GHz bands

BAT-ANT-N-MiMoDB-5N-IP65

Order Number: 943 981-012

Radiation Pattern

Horizontal 2,400 MHz

120

150

180

-150

-120 port 1 port 2 port 3

Vertical 2,400 MHz

180

150

120

-150

-120 port 1 port 2 port 3

90

-40 -30 -20 -10 0

-90 90

-40 -30 -20 -10 0

-90

60

30

0 horizontal 5470 MHz

120

150

180

-60 60

-30

-150

-120 port 1 port 2 port 3

30 vertical 5470 MHz

150

180

120

-30

-60

-150

-120 port 1 port 2 port 3

90

60

30

-40 -30 -20 -10 0

-90

-60

-30

0

90

60

30

-40 -30 -20 -10 0

-90

-60

-30

0

30

BAT Antenna Guide BAT

Release 09 05/2015

Frequency range

Gain

VSWR (voltage standing wave ratio)

Polarization

HPBW (half power bandwidth)

2400 MHz ... 2500 MHz

5150 MHz ... 5875 MHz

3.5 dBi / 5.5 dBi

1.8

3 × Linear, vertical horizontal 360°

Downtilt 0°

Max. Power 2 W

Impedance

Connector

50 Ω

3 × N male at 3.28 ft (1 m) cable directly attached

Table 17: Electrical Specification

Temperature

Radome color

Radome material

−40 °F ... 176 °F (−40 °C ... +80 °C)

7035 (Light Gray) plastic

Dimensions

Protection class

12.2 in × 4.33 in × 1.57 in (310 mm × 110 mm

× 40 mm)

IP65

Table 18: Environmental & Mechanical Characteristics

3 × 3 ft (90 cm) directly mounted to the antenna with N male connectors

3 × Pigtail, R-SMA male to N female

Mounting material

Table 19: Cable and Accessories

4.2.5

Dual band Hemispherical Antenna for 2.4 and 5 GHz band

BAT-ANT-N-6ABG-IP65

Order Number: 943 981-004

Radiation Pattern

Horizontal 2,400 MHz

BAT Antenna Guide BAT

Release 09 05/2015

Vertical 2,400 MHz

31

horizontal 5470 MHz vertical 5470 MHz

32

Ø 4.5

Ø 0.18

Ø 86

Ø 3.39

17.7

0.7

mm inch

70

2.76

42.89

1.69

BAT Antenna Guide BAT

Release 09 05/2015

Frequency range

Impedance

VSWR (voltage standing wave ratio)

Polarization

Gain

3 dB beamwidth horizontal

3 dB beamwidth horizontal

Max. Power

Table 20: Electrical Specification

3.28 ft (1 m ) with N male connectors at both ends.

Pigtail, R-SMA male to N female

Table 21: Cable and Accessories

2300 MHz ... 2500 MHz

4900 MHz ... 5935 MHz

50 Ω

1.8

Linear, vertical

6 dBi at 2.4 GHz

8 dBi at 5 GHz at 2.4 GHz 360° at 5 GHz 173°

75 W (CW) at 77 °F (25 °C)

BAT Antenna Guide BAT

Release 09 05/2015

33

4.3

Sector Antennas

4.3.1

Directional antenna for the 2.4 GHz band with 8 dBi gain

BAT-ANT-N-8G-DS-IP65

Order Number: 943 981-009

Radiation Pattern

Horizontal 2,400 MHz Vertical 2,400 MHz

Table 22: Directional characteristic

Frequency range

Impedance

VSWR (voltage standing wave ratio)

Polarization

2400 MHz ... 2485 MHz

50 Ω

1.5

dual linear, ± 45° slant

Gain

3 dB beamwidth horizontal

8 dBi

75°

3 dB beamwidth vertical 70°

Downtilt 0°

Isolation between ports

Front to back ratio

25 dB

14 dB

Table 23: Electrical Specification

34

BAT Antenna Guide BAT

Release 09 05/2015

Max. Power

Connector

Table 23: Electrical Specification

10 W (CW) at 77 °F (25 °C)

2 × N female

Dimensions

Radome material

Radome color

Operating temperature range

Storage temperature range

Windload

Protection class

Table 24: Mechanical Properties

3.98 in × 3.15 in × 1.38 in (101 mm × 80 mm

× 35 mm)

LEXAN EXL 9330

RAL 7044 (silk gray)

−40 °F ... 176 °F (−40 °C ... +80 °C)

−40 °F ... 176 °F (−40 °C ... +80 °C)

3.37 lbf at 99 m/h (15 N at 160 km/h)

IP65

2 × 3.28 ft (1 m) with N male connectors at both ends

2 × Pigtail, R-SMA male to N female

Mounting material

Table 25: Cable and Accessories

BAT Antenna Guide BAT

Release 09 05/2015

35

4.3.2

Polarization-diversity antenna for 5 GHz band, linear

BAT-ANT-N-9A-DS-IP65

Order Number: 943 981-010

Radiation Pattern horizontal 5470 MHz vertical 5470 MHz

81

3.19

mm inch

Frequency range

Impedance

Table 26: Electrical Specification

36

5150 MHz ... 5925 MHz

50 Ω

BAT Antenna Guide BAT

Release 09 05/2015

VSWR (voltage standing wave ratio)

Polarization

Gain

2 dual linear, ± 45° slant

9 dBi

3 dB beamwidth horizontal

3 dB beamwidth vertical

70°

60°

Downtilt 0°

Isolation between ports 20 dB

Front to back ratio

Max. Power

Connector

20 dB

10 W (CW) at 77 °F (25 °C)

2 × N female

Table 26: Electrical Specification

Dimensions

Housing material

Radome material

Radome material

Radome color

Operating temperature range

Storage temperature range

Windload

Protection class

Table 27: Mechanical Properties

2 × 3.28 ft (1 m) with N male connectors at both ends

2 × Pigtail, R-SMA male to N female

Mounting material

Table 28: Cable and Accessories

3.98 in × 3.15 in × 1.38 in (101 mm × 80 mm

× 35 mm)

ASA and aluminum

ASA

LEXAN EXL 9330

RAL 7044 (silk gray)

−40 °F ... 176 °F (−40 °C ... +80 °C)

−40 °F ... 176 °F (−40 °C ... +80 °C)

3.37 lbf at 99 m/h (15 N at 160 km/h)

IP65

BAT Antenna Guide BAT

Release 09 05/2015

37

4.3.3

Sectoral MiMoantenna for 5 GHz band

BAT-ANT-N-MiMo5-9N-IP65

Order Number: 943 981-013

Radiation Pattern horizontal – connection 1 vertical – connection 1 horizontal – connection 2 vertical – connection 2

38

BAT Antenna Guide BAT

Release 09 05/2015

horizontal – connection 3 vertical – connection 3

Frequency range

Impedance

VSWR (voltage standing wave ratio)

Polarization

Gain

3 dB beamwidth horizontal

3 dB beamwidth vertical

5150 MHz ... 5875 MHz

50 Ω

1.5

3 × linear vertical / horizontal / +45°

9 dBi

65°

65°

Downtilt 0°

Max. Power 2 W (CW) at 77 °F (25 °C)

Connector N female

Table 29: Electrical Specification

Dimensions

Radome material

Radome color

Operating temperature range

Storage temperature range

Windload

Protection class

Table 30: Mechanical Properties

3.98 in × 3.15 in × 1.38 in (101 mm × 80 mm

× 35 mm)

LEXAN EXL 9330

RAL 7044 (silk gray)

−40 °F ... 176 °F (−40 °C ... +80 °C)

−40 °F ... 176 °F (−40 °C ... +80 °C)

3.37 lbf at 99 m/h (15 N at 160 km/h)

IP65

3 × 3.28 ft (1 m) with N male connectors at both ends

3 × Pigtail, R-SMA male to N female

Mounting material

Table 31: Cable and Accessories

BAT Antenna Guide BAT

Release 09 05/2015

39

4.4

Directional Antennas

4.4.1

Directional antenna for the 2.4 GHz band with 14 dBi gain

BAT-ANT-N-14G-IP23

Order Number: 943 981-005

Radiation Pattern

Horizontal 2,400 MHz Vertical 2,400 MHz

40

BAT Antenna Guide BAT

Release 09 05/2015

mm inch

40

1,57

252,99

9,96

200

7,87

Frequency range

Impedance

VSWR (voltage standing wave ratio)

Polarization

2300 MHz ... 2500 MHz

50 Ω

1.5

vertical

Gain

3 dB beamwidth horizontal

14 dBi

35°

3 dB beamwidth vertical 30°

Downtilt 0°

Front to back ratio

Max. Power

Connector

20 dB

75 W (CW) at 77 °F (25 °C)

N female

Table 32: Electrical Specification

Dimensions

Radome material

Radome color

Operating temperature range

Storage temperature range

Windload

Protection class

Table 33: Mechanical Properties

3.98 in × 3.15 in × 1.38 in (101 mm × 80 mm

× 35 mm)

LEXAN EXL 9330

RAL 7044 (silk gray)

−40 °F ... 176 °F (−40 °C ... +80 °C)

−40 °F ... 176 °F (−40 °C ... +80 °C)

3.37 lbf at 99 m/h (15 N at 160 km/h)

IP23

BAT Antenna Guide BAT

Release 09 05/2015

41

3.28 ft (1 m ) with N male connectors at both ends.

Pigtail, R-SMA male to N female

Mounting material

Table 34: Cable and Accessories

Note: Applies for use in the EU: If you use the antenna BAT-ANT-N-14G-

IP23 in combination with OpenBAT family devices, use the supplied 1 m

(3.28ft) antenna cable in combination with BAT-CLB-2 N m-f cable.

42

BAT Antenna Guide BAT

Release 09 05/2015

4.4.2

Directional antenna for 5 GHz band with 18 dBi gain

BAT-ANT-N-18A-V-IP65

Order Number: 943 981-006

Due to their compact design, several of these antennas can be mounted on a single post. For better separation of the spatial streams with MiMo, you mount the antennas with different alignments (polarizations).

Example:

1st antenna: vertical

2nd antenna: horizontal

3rd antenna: 45° horizontal

Radiation Pattern horizontal 5470 MHz vertical 5470 MHz

Frequency range

Gain

Table 35: Electrical Specification

BAT Antenna Guide BAT

Release 09 05/2015

5150 MHz ... 5250 MHz

5250 MHz ... 5350 MHz

5350 MHz ... 5725 MHz

5725 MHz ... 5875 MHz

18 dBi

19 dBi

18.5 dBi

18 dBi

43

Polarization

HPBW / horizontal

HPBW / vertical

Front to back ratio

Power handling

Impedance

Connector

Table 35: Electrical Specification

Linear, vertical

18°

18°

> 30 dB

6 W (CW)

50 Ω

N Jack

Windload @ wind speed

Temperature

Radome material

Radome color

Weight

Dimensions

Protection class

23.4 lbf at 64 m/h (104 N at 216 km/h)

−49 °F ... +158 °F (−45 °C ... +70 °C) plastic

7035 (Light Gray)

0.11 kg, 0.24 lb

7.48 in × 7.48 in × 1.2 in (190 mm × 190 mm

× 30.5 mm)

IP65 / IP67

Table 36: Environmental & Mechanical Characteristics

3.28 ft (1 m ) with N male connectors at both ends.

Pigtail, R-SMA male to N female

Mounting material

Table 37: Cable and Accessories

BAT-ANT-N-23A-V-IP65

Order Number: 943 981-007

44

Relevant for North America:

Operate the antennas BAT-ANT-N-23A-V-IP65 and BAT-ANT-N-23A-

VH-IP65 exclusively in point-to-point connections.

Due to their compact design, several of these antennas can be mounted on a single post. For better separation of the spatial streams with MiMo, you mount the antennas with different alignments (polarizations).

Example:

BAT Antenna Guide BAT

Release 09 05/2015

1st antenna: vertical

2nd antenna: horizontal

3rd antenna: 45° horizontal

Radiation Pattern horizontal 5470 MHz vertical 5470 MHz

Frequency range

Gain

VSWR (voltage standing wave ratio)

Polarization

HPBW / horizontal

HPBW / vertical

Front to back ratio

Max. Power

Impedance

Connector

Table 38: Electrical Specification

5150 MHz ... 5350 MHz

5470 MHz ... 5875 MHz

23 dBi

< 1.5

Linear, vertical

> 30 dB

6 W

50 Ω

N Jack

Windload @ wind speed

Temperature

Radome material

Radome color

59.3 lbf at 136 m/h (264N at 220 km/h)

−49 °F ... +158 °F (−45 °C ... +70 °C) plastic

Grey-white

Dimensions

Protection class

12.01 in × 12.01 in × 0.98 in (305 mm × 305 mm

× 25 mm)

IP65 / IP67

Table 39: Environmental & Mechanical Characteristics

BAT Antenna Guide BAT

Release 09 05/2015

45

3.28 ft (1 m ) with N male connectors at both ends.

Pigtail, R-SMA male to N female

Mounting material for wall and mast mount

Table 40: Cable and Accessories

4.4.3

Directional antenna for 5 GHz band with a gain of

23 dBi

BAT-ANT-N-23A-VH-IP65

Order Number: 943 981-008

Radiation Pattern

Connection: horizontal / polarization: horizontal

(5,470 MHz)

Connection: horizontal / polarization: vertical

(5,470 MHz)

46

BAT Antenna Guide BAT

Release 09 05/2015

Connection: vertical / polarization: horizontal

(5,470 MHz)

Connection: vertical / polarization: vertical

(5,470 MHz)

Frequency range

Gain

VSWR (voltage standing wave ratio)

Polarization

HPBW / horizontal

HPBW / vertical

Front to back ratio

Max. Power

Impedance

Connector

Table 41: Electrical Specification

5150 MHz ... 5875 MHz

23 dBi

< 1.7

dual Linear, vertical and horizontal

−30 dB

6 W

50 Ω

2 × N female

Windload @ survival speed

Temperature

Radome material

Radome color

59.3 lbf at 136 m/h (264N at 220 km/h)

−49 °F ... +158 °F (−45 °C ... +70 °C) plastic

Grey-white

Dimensions

Protection class

14.61 in. × 14.61 in. × 1.57 in. (371 mm × 371 mm

× 40 mm)

IP65 / IP67

Table 42: Environmental & Mechanical Characteristics

2 × 3.28 ft (1 m) with N male connectors at both ends

2 × Pigtail, R-SMA male to N female

Mounting material for wall and mast mount

Table 43: Cable and Accessories

BAT Antenna Guide BAT

Release 09 05/2015

47

4.4.4

Directional antenna for 5 GHz band with 18 dBi gain

BAT-ANT-N-MiMo-18N-IP65

Order Number: 943 981-014

MiMo is achieved via polarization diversity.

Relevant for North America:

See “Legal regulations for operation external antennas” on page 14.

66

2.60

14

0.55

mm inch

+45°

305 12.0

15.5

0.59

–45°

72.8

2.83

63.3

2.48

Radiation Pattern

5 GHz horizontal - connection on the right (+45°) vertical - connection on the right (+45°)

48

BAT Antenna Guide BAT

Release 09 05/2015

Amplitude [dB]

Azimuth [deg]

Radiation Pattern

Amplitude [dB]

Radiation Pattern

Horizontal-Plane: Copolar horizontal - connection on the left (–45°)

Radiation Pattern

Amplitude [dB]

Azimuth [deg]

Elevation [deg]

Vertical-Plane: Copolar vertical - connection on the left (–45°)

Radiation Pattern

Amplitude [dB]

Horizontal-Plane: Copolar horizontal - vertical connection

Radiation Pattern

Amplitude [dB]

Azimuth [deg]

Elevation [deg]

Vertical-Plane: Copolar vertical - vertical connection

Horizontal-Plane: Copolar

Radiation Pattern

Amplitude [dB]

Horizontal-Plane: Copolar

BAT Antenna Guide BAT

Release 09 05/2015

Elevation [deg]

Vertical-Plane: Copolar

49

Band 1 Band 2 Band 3

Frequency range 4900 MHz ... 5150 MHz 5150 MHz ... 6000 MHz 6000 MHz ... 6100 MHz

1.8

1.8

VSWR (voltage standing wave ratio)

1.8

Gain 17 dBi

HPBW / vertical 20°

18 dBi 16 dBi

15°

Table 44: Electrical Specification

Polarization

Max. Power

Impedance

Connector

Table 45: General data

0°, +/−45° inclination

6 W

50 Ω

N Jack

Windload @ survival speed

Temperature

Radome material

Radome color

Weight

Dimensions

Protection class

263 N at 136 m/h (263 N at 220 km/h)

−49 °F ... +158 °F (−45 °C ... +70 °C) plastic

Grey-white

3.31 lb (1.5 kg)

12.01 in × 12.01 in × 0.59 in (305 mm × 305 mm

× 15 mm)

IP67

Table 46: Environmental & Mechanical Characteristics

3 × 3.28 ft (1 m) with N male connectors at both ends

3 × Pigtail, R-SMA male to N female

Mounting material for wall and mast mount

Table 47: Cable and Accessories

50

BAT Antenna Guide BAT

Release 09 05/2015

4.5

Radiating Cable Antennas (Leaky Cable)

4.5.1

Leaky Cable for 2.4 GHz; black

Radiating cables are coaxial cables that are equipped with small slots in their shields at regular intervals that operate as antennas. This leads to a homogeneous field around the cable.

100 m; 328 ft 50 m; 164 ft

The 100 m (328 ft) cable is designed to be fed by 2 access points, each feeding the cable for approximately 50 m (164 ft). The 50 m (164 ft) cable is designed to be used with one Access Point and equipped with a terminator at the end.

BAT-ANT-N-LC-G-50m-IP65

Order Number: 943 981-001

Cable length

Cable specification

Table 48: Specification

Frequency band

Antenna connector

Table 49: Radio technology

Operating temperature

Storage/transport temperature

Dimensions

Protection class

Table 50: Ambient conditions

164 ft (50 m)

2 × N male connectors; 0.15 dB at 2.4 GHz

2000 MHz - 2900 MHz

N-type male

−40 ºF ... +185 ºF (−40 ºC ... +85 ºC)

−70 ºC ... +85 ºC

164 ft (50 m); d = 0.6 in (15 mm)

IP65

BAT Antenna Guide BAT

Release 09 05/2015

51

Halogen free and flame retardant outer sheath

Low corrosive gas emission according to IEC 60754-2

Flame retardant according to IEC 60332-1 and IEC 60332-3 cat. C

Low smoke emission according to IEC 61034

Table 51: Flammability Characteristics

Leaky Cable

2 × N-connector, preassembled

1 × terminating resistor 50 Ohm

50 × fastening clip

Table 52: Scope of delivery and accessories

52

BAT Antenna Guide BAT

Release 09 05/2015

BAT-ANT-N-LC-G-100m-IP65

Order Number: 943 981-101

Cable length

Cable specification

Table 53: Specification

Frequency band

Antenna connector

Table 54: Radio technology

Operating temperature

Storage/transport temperature

Dimensions

Protection class

Table 55: Ambient conditions

100 m, 328 ft

2 × N male connectors; 0.15 dB at 2.4 GHz

2000 MHz - 2900 MHz

N-type male

−40 ºF ... +185 ºF (−40 ºC ... +85 ºC)

−70 ºC ... +85 ºC

328 ft (100 m); d = 0.6 in (15 mm)

IP65

Halogen free and flame retardant outer sheath

Low corrosive gas emission according to IEC 60754-2

Flame retardant according to IEC 60332-1 and IEC 60332-3 cat. C

Low smoke emission according to IEC 61034

Table 56: Flammability Characteristics

Leaky Cable

2 × N-connector, preassembled

1 × terminating resistor 50 Ohm

100 × fastening clip

Table 57: Scope of delivery and accessories

Configurations Longitudinal Attenuation db/328 ft (dB/100 m)

LC at 4 in (10 cm) from a concrete floor 15

LC at 0.6 in (15 mm) from a metal surface 17

LC directly against a metal surface 34

Table 58: Longitudinal attenuation of both cables between 2.4 and 2.485 GHz

BAT Antenna Guide BAT

Release 09 05/2015

53

Figure 1: Mounting a leaky wave conductor in the tunnel. Fastening clips are included in the delivery.

54

BAT Antenna Guide BAT

Release 09 05/2015

5 Cables/Adapter

All antennas are supplied with 1 m cable / N-plug to N-jack and pigtail.

BAT-CLB-2 N m-f, BAT-CLB-2 N f-f

Order Number: m-m: 943 903-513 m-f: 943 903-514

Length

Diameter

Attenuation

Connector

Protection class

Table 59: Characteristics

6.56 ft (2 m)

6 mm

1.4 dB / 2.4 GHz

3 dB / 5 GHz

N male to female

IP65

Temperature range

Installation temperature range

Flammability

Halogen-free

2002/95/EC (RoHS) compliant

Table 60: Flammability Characteristics

−40 ºF ... +185 ºF (−40 ºC ... +85 ºC)

−20 °C ... +60 °C

UL 1581 § 1080 (VW-1) in compliance with IEC 60754

BAT Antenna Guide BAT

Release 09 05/2015

55

BAT-CLB-5 N m-f

Order Number: 943 903-516

Length

Diameter

Attenuation

Connector

Table 61: Characteristics

16.4 ft (5 m)

13 mm

1.3 dB / 2.4 GHz

2.3 dB / 5 GHz

N male/ N female

Temperature range

Installation temperature range

Flammability

Halogen-free

2002/95/EC (RoHS) compliant

Table 62: Flammability Characteristics

−40 ºF ... +185 ºF (−40 ºC ... +85 ºC)

−20 °C ... +60 °C

UL 1581 § 1080 (VW-1) in compliance with IEC 60754

56

BAT Antenna Guide BAT

Release 09 05/2015

BAT-CLB-15 N m-f

Order Number: 943 903-515

Length

Diameter

Attenuation

Connector

Table 63: Characteristics

49,2 ft (15 m)

13 mm

3 dB / 2.4 GHz

4 dB / 5 GHz

N male/ N female

Temperature range

Installation temperature range

Flammability

Halogen-free

2002/95/EC (RoHS) compliant

Table 64: Flammability Characteristics

−40 ºF ... +185 ºF (−40 ºC ... +85 ºC)

−20 °C ... +60 °C

UL 1581 § 1080 (VW-1) in compliance with IEC 60754

BAT Antenna Guide BAT

Release 09 05/2015

57

BAT-Pigtail

Order Number: 943 903-360

Length

Diameter

Attenuation

Connector

Table 65: Characteristics

0.66 ft (0.2 m)

6 mm

0.5 dB / 2.4 GHz

1 dB / 5 GHz

N female/ RPSMA-Plug

58

BAT Antenna Guide BAT

Release 09 05/2015

BAT-ANT-Protector m-f

Order Number: 943 903-373

The BAT-ANT-Protector m-f is a bandpass with electrical insulation. It helps prevent damage due to electrostatic discharging.

The BAT-ANT-Protector m-f can enable a watertight connection to the switch cabinet.

This device is strongly recommended to be used in- and outdoor wherever electrical discharge, overvoltage or unclear grounding occur.

Please refer to the Outdoor Installation Guide for how to mount and plan the installation.

Main path connectors

Mounting and grounding

Side of bulkhead

Design specialty

Table 66: Product Configuration

Connection 1: N socket, protected (electrically isolated)

Connection 2: N socket, unprotected

MH170/brk (MH=bulkhead mounting/brk=bracket) protected side inline design

Impedance

Frequency range

Return loss

Insertion loss

RF CW power

Surge current handling capability

Residual pulse energy

Table 67: Electrical Specification

50 Ω

2000 MHz ... 6000 MHz

≥ 20 dB

≤ 0.2 dB

≤ 300 W

50 multiple kA (test pulse 8/20 μs)

0.0001 μJ typically (test pulse 4 kV 1.2/50 μs / 2 kA

8/20 μs) Main path - protected side

Operating temperature

Waterproof degree

2002/95/EC (RoHS)

−40 ºF ... +185 ºF (−40 ºC ... +85 ºC)

IP65 (according to IEC 60529, data refers to the coupled state) compliant

Table 68: Environmental & Mechanical Characteristics

BAT Antenna Guide BAT

Release 09 05/2015

59

BAT-LAN-Protector IP68

Order Number: 943 903-374

Overvoltage protector for the PoE/LAN cable.

Please refer to the Outdoor Installation Guide for how to mount and plan the installation.

Main path connectors RJ45 jack (female) – RJ45 jack (unprotected side – protected side)

Grounding via mounting bracket or grounding M6 screw (ring of cable shoe > 0.26 in (6.5 mm))

Table 69: Product Configuration

Data transmission rate

Frequency range DC to 100 MHz

Impedance 100 Ω

Current rating

Response Time

Current handling capability

Protection level

1000 Mbit/s per pair

2 ns wire - wire wire - ground shield – ground wire - wire wire - ground shield – ground

Clamping voltage wire - wire wire - ground shield – ground

1.5 A max.

0.1 kA (test pulse 8/20 µs)

2.5 kA (test pulse 8/20 µs)

6 kA (test pulse 8/20 µs)

20 V typically (test pulse 4 kV 1.2/50 μs / 2 kA 8/20 µs)

700 V typically (test pulse 4 kV 1.2/50 μs / 2 kA 8/20 µs)

700 V typically (test pulse 4 kV 1.2/50 μs / 2 kA 8/20 µs)

15 V

90 V

90 V

Table 70: Electrical Specification

Cable category

Operating temperature

Protection class according to ISO/IEC 11801:2002 class D specified (up to

CAT-5e system)

−40 ºF ... +185 ºF (−40 ºC ... +85 ºC)

IP68

Table 71: Environmental & Mechanical Characteristics

60

BAT Antenna Guide BAT

Release 09 05/2015

A Explanation of passive antennas in explosive hazard areas

Hirschmann BAT antennas are passive devices which are not able to increase the power by themselves.

Devices which are specified in accordance with the ATEX directive complying with the technical standards EN 60079-0 and EN 60079-15 can be operated with all associated Hirschmann BAT antennas. You recognize the specified devices by their device label.

With the use of the prescribed device configuration, the 2 Watts maximum power permitted for the ATEX equipment group IIC is not reached in the following bands:

2.4 GHz ... 2.4835 GHz

5.15 GHz ... 5.35 GHz

 5.47 GHz ... 5.725 GHz

BAT Antenna Guide BAT

Release 09 05/2015

61

B Antenna diagrams

This chapter was produced with the generous support of

Huber+Suhner GmbH.

Polarization and transmission

The following section explains the vertical and horizontal polarization:

Vertical polarization

With vertical polarization, the electrical field runs perpendicular to the earth’s surface. The magnetic field runs perpendicular to the electrical field in transmission direction ‘z’ - that is, parallel to the earth’s surface.

x z y

Figure 2: Electrical field in transmission direction ‘z’

 Horizontal polarization

With horizontal polarization, the electrical field runs parallel to the earth’s surface. The magnetic field runs perpendicular to the electrical field in transmission direction ‘z’ - that is, perpendicular to the earth’s surface.

62

BAT Antenna Guide BAT

Release 09 05/2015

x z y h

Figure 3: Electrical field in transmission direction ‘z’

Interpreting antenna diagrams

The antenna diagrams used in this document show the directional characteristic of the relevant antenna in horizontal and vertical crosssections.

When interpreting antenna diagrams, note the following:

 Antenna diagrams only specify relative outputs.

The relative output of the antenna depends on the observed angle.

The maximum output of an antenna is standardized to 0 dB in the antenna diagram.

 Angles in the antenna diagram with 0 dB are known as main lobes.

 Angles in the antenna diagram with less than 0 dB are known as side lobes.

The antenna diagram does not tell you anything about the absolute output of the antenna nor about the range of the antenna nor the antenna gain.

The following is an example of an interpretation of antenna diagrams:

BAT Antenna Guide BAT

Release 09 05/2015

63

Omni-directional antenna, horizontal cross-section, antenna viewed from above

in all angles ca. 0 dB

Omni-directional antenna, vertical cross-section, antenna viewed from the side

side lobe (~ -12 dB) side lobe (-10 dB) main lobe (0 dB) main lobe (0 dB) side lobe (~ -9 dB) side lobe (~ -11 dB)

Table 72: Interpreting antenna diagrams

Decibels (dB)

The remaining output of an antenna at a specific angle is shown in negative decibels (dB) on the antenna diagram.

See “Interpreting antenna diagrams” on page 64.

How do you interpret the negative decibel values on the antenna diagram?

Definition dB: Q

(P)

= 10 × lg

10

P

1

/P

2 dB

The following table shows the attenuation in steps of −3 dB:

Attenuation in decibels

−3

−6

−9

−12

Remaining output

1/2

1/4

1/8

1/16

In antenna diagrams, circles are used to display the attenuation – usually in steps of 10:

Attenuation in decibels

−10

−20

−30

−40

Remaining output

1/10

1/100

1/1000

1/10 000

64

Example:

The above antenna diagram shows the output at −30° as −10 decibels.

BAT Antenna Guide BAT

Release 09 05/2015

See “Interpreting antenna diagrams” on page 64.

This means that the antenna transmits 1/10 of the maximum output at an angle of −30°.

Example:

The above antenna diagram shows the output at 150° as −9 decibels.

See “Interpreting antenna diagrams” on page 64.

This means that the antenna transmits 1/8 of the maximum output at an angle of 150°.

BAT Antenna Guide BAT

Release 09 05/2015

65

C Index

A

ATEX zone II

F

FAQ

R

Radiating cable

T

Technical Questions

Training Courses

51

67

67

61

67

66

BAT Antenna Guide BAT

Release 09 05/2015

D Further Support

Technical Questions

For technical questions, please contact any Hirschmann dealer in your area or Hirschmann directly.

You will find the addresses of our partners on the Internet at http://www.hirschmann.com

Contact our support at https://hirschmann-support.belden.eu.com

You can contact us in the EMEA region at

 Tel.: +49 (0)1805 14-1538

 E-mail: [email protected]

in the America region at

Tel.: +1 (717) 217-2270

 E-mail: [email protected]

in the Asia-Pacific region at

 Tel.: +65 6854 9860

E-mail: [email protected]

Hirschmann Competence Center

The Hirschmann Competence Center is ahead of its competitors:

 Consulting incorporates comprehensive technical advice, from system evaluation through network planning to project planning.

Training offers you an introduction to the basics, product briefing and user training with certification.

The current technology and product training courses can be found at http://www.hicomcenter.com

Support ranges from the first installation through the standby service to maintenance concepts.

With the Hirschmann Competence Center, you have decided against making any compromises. Our client-customized package leaves you free to choose the service components you want to use.

Internet: http://www.hicomcenter.com

BAT Antenna Guide BAT

Release 09 05/2015

67

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement