USER`S MANUAL

USER`S MANUAL
www.nordictrack.com
Model No. 24917.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-800-TO-BE-FIT
(1-800-862-3348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–4 p.m. MT
ON THE WEB:
www.nordictrackservice.com
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER’S MANUAL
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PART IDENTIFICATION CHART. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
THE CHEST HEART RATE MONITOR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
EXERCISE GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
PART LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
EXPLODED DRAWING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
ORDERING REPLACEMENT PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the
warning decals. If a decal is missing or illegible, call the telephone number on the
front cover of this manual and request a
free replacement decal. Apply the decal
in the location shown. Note: The decals
may not be shown at actual size.
NORDICTRACK is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precations and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1.Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with
pre-existing health problems.
of carrying 15 or more amps. No other appliance should be on the same circuit. Do not
use an extension cord.
12.Use only a single-outlet surge suppressor
that meets all of the specifications described
on page 14. To purchase a surge suppressor,
see your local NORDICTRACK dealer or call
the telephone number on the front cover of
this manual and order part number 146148,
or see your local electronics store.
2.It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
3. Use the treadmill only as described.
4.Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
13.Failure to use a properly-functioning surge
suppressor could result in damage to the
control system of the treadmill. If the control
system is damaged, the walking belt may
slow, accelerate, or stop unexpectedly, which
may result in a fall and serious injury.
5.Place the treadmill on a level surface, with
at least 8 ft. (2.4 m) of clearance behind it
and 2 ft. (0.6 m) on each side. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
14.Keep the power cord and the surge suppressor away from heated surfaces.
6.Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
15.Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROUBLESHOOTING on page 28 if the treadmill is
not working properly.)
7.Keep children under age 12 and pets away
from the treadmill at all times.
8.The treadmill should be used only by persons weighing 375 lbs. (170 kg) or less.
16.Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 16).
9.Never allow more than one person on the
treadmill at a time.
17.Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
10.Wear appropriate exercise clothes while using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended
for both men and women. Always wear athletic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.
18.The treadmill is capable of high speeds. Adjust the speed in small increments to avoid
sudden jumps in speed.
19.The heart rate monitor is not a medical
device. Various factors, including the user’s
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is intended only as an exercise aid in determining
heart rate trends in general.
11.When connecting the power cord (see page
14), plug the power cord into a surge suppressor (not included) and plug the surge
suppressor into a grounded circuit capable
3
DANGER
20.Never leave the treadmill unattended while
it is running. Always remove the key, unplug
the power cord, and press the power switch
into the off position when the treadmill is not
in use. (See the drawing on page 5 for the
location of the power switch.)
25.
: Always unplug the power
cord immediately after use, before cleaning the treadmill, and before performing the
maintenance and adjustment procedures
described in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing other than the procedures in this manual
should be performed by an authorized service representative only.
21.Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 7, and HOW TO FOLD
AND MOVE THE TREADMILL on page 27.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
26.This treadmill is intended for home use only.
Do not use this treadmill in a commercial,
rental, or institutional setting.
22.When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
27.Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
23.Never insert any object into any opening on
the treadmill.
24.Inspect and properly tighten all parts of the
treadmill regularly.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary
NORDICTRACK® C 2150 treadmill. The C 2150 treadmill offers an impressive selection of features designed
to make your workouts at home more enjoyable and
effective. And when you’re not exercising, the unique
treadmill can be folded up, requiring less than half the
floor space of other treadmills.
reading this manual, please see the front cover of this
manual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number and the location of the serial number decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
For your benefit, read this manual carefully before using the treadmill. If you have questions after
Length: 6 ft. 9 in. (206 cm)
Width: 3 ft. 1 in. (94 cm)
Console
Handgrip Heart
Rate Monitor
Handrail
Upright
Key/Clip
Power Switch
Walking Belt
Foot Rail
Power Cord
Platform Cushion
Idler Roller
Adjustment Screws
5
PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key
number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached. Extra hardware may be included.
5/16" Star
Washer (10)–10
3/8" Nut (11)–2
3/8" Star
Washer (12)–4
#8 x 1/2" Ground
Screw (9)–1
5/16" x 1 1/2"
Screw (5)–4
3/8" x 1 1/4" Screw (8)–4
5/16" x 2" Screw (4)–4
3/8" x 1 3/4" Bolt (6)–1
3/8" x 2" Bolt (3)–1
3/8" x 2 3/4" Screw (7)–4
5/16" x 3 3/4" Screw (2)–2
1/4" x 1/2"
Bolt (36)–4
1/4" Star
Washer (35)–8
6
#8 x 3/4" Screw
(1)–4
ASSEMBLY
• Assembly requires two persons.
• To identify small parts, see page 6.
•Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
•Assembly requires the following tools:
the included hex key
one adjustable wrench
•The underside of the walking belt is coated with
high-performance lubricant. After shipping, there
may be some lubricant on top of the walking belt
or on the shipping carton. This is normal. If there
is lubricant on top of the walking belt, wipe it off
with a soft cloth and a mild, non-abrasive cleaner.
one Phillips screwdriver
To avoid damaging parts, do not use power tools.
1.
Make sure that the power cord is unplugged.
1
Place a piece of cardboard below the rear of the
Frame (56) to protect the floor or carpet.
Attach the Left Wheel Cap (96) to the Base (97)
with two #8 x 3/4" Screws (1).
Attach the Right Wheel Cap (not shown) to
the right side of the Base (97) in the same
way.
97
1
96
2.Pull the Upright Wire (84) and the Base Ground
Wire (94) through the indicated hole in the Base
(97).
2
Attach the Base Ground Wire (94) to the Base
(97) with a #8 x 1/2" Ground Screw (9).
Then, press the Grommet (81) into the square
hole in the Base (97).
84
Square
81
Hole
Hole
9
7
94
97
56
Cardboard
3.Identify the Left Upright (89), which is marked
“Left.” Have a second person hold the Left
Upright near the Base (97).
3
84
89
See the inset drawing. Tie the wire tie in the
Left Upright (89) securely around the end of the
Upright Wire (84). Then, pull the other end of the
wire tie until the Upright Wire is routed through
the Left Upright.
Wire
Tie
Wire
Tie
89
84
4.Hold the Left Upright (89) against the Base
(97). Be careful not to pinch the wires. If necessary, position the Base Ground Wire (94) in
the hole in the side of the Left Upright.
97
4
Insert two 3/8" x 2 3/4" Screws (7) and two 3/8"
x 1 1/4" Screws (8) with two 3/8" Star Washers
(12) into the Left Upright (89).
Partially tighten the 3/8" x 2 3/4" Screws (7) and
the 3/8" x 1 1/4" Screws (8) until the heads of
the Screws touch the Left Upright (89); do not
fully tighten the Screws yet. Note: It may be
helpful to use the Short Hex Key (114) on the
Screw shown.
89
7
114
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the
right side.
12
8
8
94
12
97
84
5.Identify the Left and Right Base Covers (92, 93),
which are marked “Left” and “Right.” Slide the
Left Base Cover onto the Left Upright (89). Slide
the Right Base Cover onto the Right Upright
(90). Do not press the Base Covers into
place yet.
5
90
89
93
92
6.With the help of a second person, hold the console assembly near the Left Upright (89).
6
Connect the Upright Wire (84) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.
Console
Assembly
84
Console
Wire
84
9
Console
Wire
Wire
Tie
89
7.Insert the wires into the Left Upright (89) as you
set the console assembly on the Left and Right
Uprights (89, 90). Be careful not to pinch the
Upright Wire (84).
7
Console
Assembly
Attach the console assembly with four 5/16" x
1 1/2" Screws (5) and four 5/16" Star Washers
(10). Start all four Screws, and then tighten
them.
5
10
5
10
90
84
89
8.Identify the Left Handrail (87), which is marked
“Left.” Insert the Left Handrail between the console assembly and the pulse assembly.
8
Console
Assembly
Attach the Left Handrail (87) with two 5/16" x 2"
Screws (4), a 5/16" x 3 3/4" Screw (2), and three
5/16" Star Washers (10) as shown. Start all
three Screws, and then tighten them.
ttach the Right Handrail (not shown) to the
A
console assembly as described above.
Pulse
Assembly
87
10
4
10
2
10
4
9.Firmly tighten the four 3/8" x 2 3/4" Screws (7),
and then tighten the four 3/8" x 1 1/4" Screws
(8) (only one side is shown).
9
93
Press the Left and Right Base Covers (92, 93)
onto the Base (97) until they snap into place.
92
7
8
97
10.Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
step 12 is completed.
10
Orient the Storage Latch (53) so that the large
barrel and the latch knob are in the positions
shown.
Attach the lower end of the Storage Latch (53) to
the Base (97) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (11).
56
Latch
Knob
53
11
Large
Barrel
11
3
97
11.Attach the upper end of the Storage Latch (53)
to the Frame (56) with a 3/8" x 1 3/4" Bolt (6)
and a 3/8" Nut (11). Note: It may be necessary
to move the Frame back and forth to align the
Storage Latch with the Frame.
11
56
11
6
53
12.Remove the packaging material from the bottom
of the Frame (56).
12
See the inset drawing. Make sure that the 1/2"
Rear Leveling Foot Nuts (111) are threaded all
the way onto the Rear Leveling Feet (60). Then,
turn the two Rear Leveling Feet all the way into
the Frame (56).
56
56
60
Lower the Frame (56) (see HOW TO LOWER
THE TREADMILL FOR USE on page 27).
60
If one of the Rear Leveling Feet (60) doesn’t sit
flat on the floor, turn the Rear Leveling Foot until
it is resting on the floor, and then tighten the 1/2"
Rear Leveling Foot Nut (111) against the Frame
(56).
111
60
13.Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex key in a secure place; the hex key is used to
adjust the walking belt (see pages 29 and 30).
12
THE CHEST HEART RATE MONITOR
HOW TO PUT ON THE HEART RATE MONITOR
The heart rate
monitor consists of
a chest strap and a
sensor. Insert the
tab on one end of
the chest strap into
the hole in one end
of the sensor as
shown. Then, press
the end of the sensor under the buckle
on the chest strap.
The tab should be
flush with the front
of the sensor.
Tabs
• Do not expose the heart rate monitor to direct
sunlight for extended periods of time; do not expose
it to temperatures above 122° F (50° C) or below 14°
F (-10° C).
Chest
Strap
• Do not excessively bend or stretch the sensor when
using or storing the heart rate monitor.
Sensor
• To clean the sensor, use a damp cloth and a small
amount of mild soap. Then, wipe the sensor with a
damp cloth and thoroughly dry it with a soft towel.
Never use alcohol, abrasives, or chemicals to clean
the sensor. Hand wash and air dry the chest strap.
Tab
TROUBLESHOOTING
If the heart rate monitor does not function properly, try
the steps below.
Sensor Buckle
The heart rate monitor must be worn
under your clothes,
tight against your
skin. Wrap the heart
rate monitor around
your chest in the location shown. Make
sure that the logo is
right-side-up. Then,
attach the other end of the chest strap to the sensor.
Adjust the length of the chest strap, if necessary.
•Make sure that you are wearing the heart rate monitor as described at the left. If the heart rate monitor
does not function when positioned as described,
move it slightly lower or higher on your chest.
•If heart rate readings are not displayed until you
begin perspiring, rewet the electrode areas.
•For the console to display heart rate readings, you
must be within arm’s length of the console.
•If there is a battery cover on the back of the sensor,
replace the battery with a new battery of the same
type.
Pull the sensor away from your body a few inches and
locate the two electrode areas, which are covered by
shallow ridges. Using saline solution such as saliva or
contact lens solution, wet the electrode areas. Then,
return the sensor to a position against your chest.
•The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical
conditions such as premature ventricular contractions (pvcs), tachycardia bursts, and arrhythmia.
CARE AND MAINTENANCE
•Thoroughly dry the sensor with a soft towel after
each use. Moisture may keep the sensor activated,
shortening the life of the battery.
•The operation of the heart rate monitor can be
affected by magnetic interference from high power
lines or other sources. If you suspect that magnetic
interference is causing a problem, try relocating the
fitness equipment.
• Store the heart rate monitor in a warm, dry place.
Do not store the heart rate monitor in a plastic bag
or other container that may trap moisture.
13
OPERATION AND ADJUSTMENT
HOW TO PLUG IN THE POWER CORD
This product is for use on a nominal 120-volt circuit
(see drawing 1). A temporary adapter may be used to
connect the surge suppressor to a 2-pole receptacle if
a properly-grounded outlet is not available (see
drawing 2).
DANGER:
Improper connection of the equipment-grounding conductor
increases the risk of electric shock. Check
with a qualified electrician or serviceman if
you are unsure whether the product is properly grounded. Do not modify the plug—if it
will not fit the outlet, have a proper outlet installed by a qualified electrician.
1
Grounded Outlet Box
Surge Suppressor
Grounding Pin
Your treadmill, like other electronic equipment, can be
damaged by sudden voltage changes in your home’s
power. To decrease the risk of damaging your
treadmill, always use a surge suppressor with your
treadmill (see drawing 1 at the right). To purchase
a surge suppressor, see precaution 12 on page 3.
Grounding Pin
Grounded Outlet
2
Use only a single-outlet surge suppressor that is
UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have
a UL suppressed voltage rating of 400 volts or less
and a minimum surge dissipation of 450 joules.
The surge suppressor must be electrically rated for
120 volts AC and 15 amps. There must be a monitoring light on the surge suppressor to indicate
whether it is functioning properly. Failure to use a
properly-functioning surge suppressor could damage the control system of the treadmill (see precaution 13 on page 3).
Grounding Plug
Grounded Outlet Box
Adapter
Surge Suppressor
Lug
Metal Screw
Grounding Plug
The temporary adapter should be used only until a
properly-grounded outlet (see drawing 1) can be installed by a qualified electrician.
This product must be grounded. If it should malfunction or break down, grounding provides a path
of least resistance for electric current to reduce the
risk of electric shock. This product’s power cord has
an equipment-grounding conductor and a grounding
plug. Plug the power cord into a surge suppressor,
and plug the surge suppressor into an appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
IMPORTANT: The treadmill is not compatible with
GFCI-equipped outlets and may not be compatible
with AFCI-equipped outlets.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly-grounded outlet box cover.
The adapter must be held in place by a metal screw.
Some 2-pole receptacle outlet box covers are not
grounded. Contact a qualified electrician to determine if the outlet box cover is grounded before
using an adapter.
14
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
As you exercise, the console will display instant exercise feedback. You can also measure your heart
rate using the handgrip heart rate monitor or the chest
heart rate monitor.
The treadmill console offers an impressive array of
features designed to make your workouts more effective and enjoyable. The console features revolutionary
iFit Live technology that enables the treadmill to communicate with your wireless network. With iFit Live
technology, you can download personalized workouts,
create your own workouts, track your workout results,
and access many other features. See www.iFit.com
for complete information.
You can even browse the Internet or listen to your favorite workout music or audio books with the console’s
stereo sound system while you exercise.
To turn on the power, see page 16. To learn how to
use the touch screen, see page 16. To set up the
console, see page 17.
In addition, the console features a selection of onboard
workouts, including eight calorie workouts, eight intensity workouts, eight speed workouts, eight incline
workouts, and six iFit Live demo workouts. Each workout automatically controls the speed and incline of the
treadmill as it guides you through an effective exercise
session. In addition, you can set a time, distance, calorie, or pace goal.
Note: The console can display speed and distance in
either miles or kilometers. To find which unit of measurement is selected, see step 4 on page 23. For simplicity, all instructions in this section refer to miles.
When you use the manual mode, you can change the
speed and incline of the treadmill with the touch of a
button.
15
HOW TO TURN ON THE POWER
HOW TO USE THE TOUCH SCREEN
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before you turn on the power. If you do
not do this, you may damage the console display
or other electrical components.
The console features a tablet with a full-color touch
screen. The following information will help you become
familiar with the device’s advanced technology:
lug in the power cord (see
P
page 14). Next, locate the
power switch on the treadmill
frame near the power cord.
Make sure that the switch is
in the reset position.
• The console functions similarly to other tablets.
You can slide or flick your finger against the screen
to move certain images on the screen, such as
the displays in a workout (see step 5 on page 18).
However, you cannot zoom in and out by sliding
your fingers on the screen.
Reset
• The screen is not pressure sensitive. You do not
need to press hard on the screen.
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. If the demo mode is turned on,
the display will show a demo presentation after
you plug in the power cord and press the power
switch into the reset position, before you insert
the key. To turn off the demo mode, see step 5 on
page 25.
• To type information into a text box, touch the text
box to view the keyboard. To use numbers or other
characters on the keyboard, touch the ?123 button. To view more characters, touch the Alt button.
Touch the Alt button again to return to the number
keyboard. To return to the letter keyboard, touch
the ABC button. To use a capital character, touch
the button with an upward-facing arrow. To use
multiple capital characters, touch the arrow button
again. To return to the lowercase keyboard, touch
the arrow button a third time. To clear the last
character, touch the button with a backward-facing
arrow and an X.
ext, stand on the foot
N
rails of the treadmill.
Key
Locate the clip attached
to the key, and slide
Clip
the clip securely onto
the waistband of your
clothes. Then, insert
the key into the console. Note: It may take
a minute for the console to be ready for use.
IMPORTANT: In an emergency, the key can be
pulled from the console, causing the walking belt
to slow to a stop. Test the clip by carefully taking
a few steps backward; if the key is not pulled from
the console, adjust the position of the clip.
ETS129710
(24992, NTL11010)
• Use the buttons on the
console shown to navigate
the tablet. Press the Back
button to return to the previous screen. Press the Home
button to return to the main
menu. Note: The center button does not function.
16
Home
Back
HOW TO SET UP THE CONSOLE The browser will open to the iFit.com registration
page. Touch an entry box to view the keyboard.
Slide your finger up or down the screen to scroll up
or down the page.
Before using the treadmill for the first time, set up the
console.
1. Connect to your wireless network.
Next, enter a username and password and your
e-mail address. Enter the activation code from the
iFit Live flier that came with the treadmill. Touch
the Place of Purchase drop-down menu for a list
of options; then, touch the location where you purchased your product. Touch the words MEDICAL
DISCLAIMER, read the medical disclaimer,
touch the I Accept button, and check the medical disclaimer checkbox. Then, touch the Confirm
Activation Code button.
Note: In order to access the Internet, download iFit
Live workouts, and use other features of the console, you must be connected to a wireless network.
See HOW TO USE THE WIRELESS NETWORK
MODE on page 25 to connect the console to your
wireless network.
2. Register your product.
When you are connected to your wireless network,
a prompt will appear on the screen asking you to
register your treadmill. Follow the instructions of
the prompt to register your treadmill. If the prompt
does not appear, please see the back cover of this
manual and register your treadmill.
Enter the requested personal information. When
you have entered all of the information, touch the
Finish button. Then, touch the Home button on the
console to exit the browser.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
3. Check for firmware updates.
First, see step 1 on page 23 and step 2 on page 24
and select the maintenance mode. Then, see step
3 on page 24 and check for firmware updates.
To use the manual mode, see page 18. To use an
onboard workout, see page 20. To use a set-a-goal
workout, see page 21. To use an iFit Live workout,
see page 22.
4. Calibrate the incline system.
To use the equipment settings mode, see page 23.
To use the maintenance mode, see page 24. To use
the wireless network mode, see page 25. To use
the stereo sound system, see page 26. To use the
Internet browser, see page 26.
See step 4 on page 24 and calibrate the incline
system of the treadmill.
5. Create an iFit Live account.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 30).
Touch the globe button near the lower-left corner
of the screen and touch the iFit Live button.
Note: For information about navigating in the
browser, see page 26. The browser will open to the
iFit.com home page. Touch the Register button in
the upper-right corner of the screen.
17
HOW TO USE THE MANUAL MODE
Note: The first time you adjust the incline, you
must first calibrate the incline system (see step 4
on page 24). For your safety, as you adjust the
incline setting to negative levels, the maximum
speed of the treadmill will decrease at set
intervals.
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page
16. Note: It may take a minute for the console
to be ready for use.
5.Monitor your progress.
2.
Select the main menu.
The console
offers several display
modes. The
display mode
that you select
will determine
which workout
information is shown. To select the desired display
mode, simply flick or slide the screen (see page
16). You can also view additional information by
touching the red boxes on the screen.
When you turn
on the power,
the main menu
should appear after the
console boots
up. Touch the
home button in
the lower-left
corner of the screen to return to the main menu at
any time.
3.
Start the walking belt and adjust the speed.
As you walk or run on the treadmill, the screen can
show the following workout information:
Touch the Start button on the screen or press the
Start button on the console to start the walking
belt. You can also press the Manual button on the
console, and then touch the Resume button on
the screen. The walking belt will begin to move at
1 mph. As you exercise, change the speed of the
walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press
one of the buttons, the speed setting will change
by 0.1 mph; if you hold down the button, the speed
setting will change in increments of 0.5 mph.
If you press one of the numbered 1 Step Speed
buttons, the walking belt will gradually change
speed until it reaches the selected speed setting.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button.
4. Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline increase and decrease buttons or one of
the numbered 1 Step Incline/Decline buttons. Each
time you press one of the buttons, the incline will
gradually change until it reaches the selected incline setting.
18
• The incline level of the treadmill
• The elapsed time
•The time left (Note: The manual mode does not
have a time left countdown.)
• The approximate number of calories you have
burned
• The approximate number of calories burned per
hour
• The distance that you have walked or run
• The number of vertical feet you have climbed
• The speed of the walking belt
• A track representing 1/4 mile (400 m)
• Your pace in minutes per mile
•Your current lap number
•Your heart rate (see step 6)
detected, your heart rate will be shown. For the
most accurate heart rate reading, continue to
hold the contacts for about 15 seconds.
The displays at the top of the screen can show two
types of information. Touch each display until the
display shows the desired information.
If desired, adjust the
volume by pressing the
volume increase and
decrease buttons on the
console.
7. Turn on the fan if desired.
Increase
The fan features multiple speed settings and an
auto mode. When the auto mode is selected, the
speed of the fan will automatically increase and
decrease as the speed of the walking belt increases
and decreases.
Decrease
To pause the workout, touch one of the menu buttons or press the Stop button on the console. To
continue the workout, touch the Resume button or
the Start button. To end the workout session, touch
the End Workout button.
Press the fan increase
Increase
button to increase the
fan speed. Note: If you
press the fan increase
Decrease
button once while the
fan is on its maximum
speed setting, the auto
fan mode will be selected. Press the fan decrease
button repeatedly to decrease the fan speed or to
turn off the fan.
6. Measure your heart rate if desired.
Note: If you use the handgrip heart rate monitor and the chest heart rate monitor at the same
time, the console will not display your heart
rate accurately. For information about the chest
heart rate monitor, see page 13.
Before using the
handgrip heart
rate monitor, remove the sheets
of plastic from the
metal contacts
on the pulse bar.
In addition, make
sure that your
hands are clean.
8.When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to zero percent. The incline must be at zero percent or you
may damage the treadmill when you fold it to
the storage position. Next, remove the key from
the console and put it in a secure place.
Contacts
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill’s electrical components may
wear prematurely.
To measure your heart rate, stand on the foot
rails and hold the pulse bar with your palms on
the metal contacts for approximately ten seconds;
avoid moving your hands. When your pulse is
19
HOW TO USE AN ONBOARD WORKOUT
If the speed or incline setting is too high or too low
at any time during the workout, you can override
the setting by pressing the Speed or Incline buttons; however, when the next segment begins,
the treadmill will automatically adjust to the
speed and incline settings for the next
segment.
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page
16.
2. Select an onboard workout.
To pause the workout, touch either the back button
or the home button in the lower-left corner of the
screen, or press the Stop button on the console.
To continue the workout, touch the Resume button
or press the Start button on the console. To end
the workout, touch the End Workout button.
To select an onboard workout, press the Calorie
button, the Intensity button, the Speed button, or
the Incline button on the console.
Then, select the desired workout. The screen will
show the name, duration, and distance of the workout. The screen will also show the approximate
number of calories you will burn during the workout
and a profile of the incline settings of the workout.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories that
you burn will depend on your metabolic rate. In
addition, if you manually change the speed or
incline of the treadmill during the workout, the
number of calories you burn will be affected.
3.Start the workout.
Touch the Start Workout button to start the workout. A moment after you touch the button, the walking belt will begin to move. Hold the handrails and
begin walking.
4.Monitor your progress.
See step 5 on page 18. The screen can also show
a profile of the speed and incline settings of the
workout.
Each workout is divided into several segments.
One speed setting and one incline setting are
programmed for each segment. Note: The same
speed setting and/or incline setting may be programmed for consecutive segments.
5. Measure your heart rate if desired.
See step 6 on page 19.
uring the workout, the profile will show your progD
ress. To view the profile, flick or slide the screen.
The vertical colored line will indicate the current
segment of the workout. The bottom profile represents the incline setting of the current segment.
The top profile represents the speed setting of the
current segment.
6. Turn on the fan if desired.
See step 7 on page 19.
7. W
hen you are finished exercising, remove the
key from the console.
At the end of the first segment of the workout, the
treadmill will automatically adjust to the speed and/
or incline settings for the next segment.
The workout will continue in this way until the last
segment ends. The walking belt will then slow to
a stop and a workout summary will appear on the
screen. After you view the workout summary, touch
the Finish button to return to the main menu. You
may also be able to either save or publish your results using one of the options on the screen.
20
See step 8 on page 19.
HOW TO USE A SET-A-GOAL WORKOUT
The workout will function in the same way as the
manual mode (see pages 18 and 19).
1.Insert the key into the console.
The workout will continue until you reach the goal
that you set. The walking belt will then slow to a
stop, and a workout summary will appear on the
screen. After you view the workout summary, touch
the Finish button to return to the main menu. You
may also be able to either save or publish your results using one of the options on the screen.
See HOW TO TURN ON THE POWER on page
16.
2. Select the main menu.
See step 2 on page 18.
3.
Select a set-a-goal workout.
Note: The calorie goal is an estimate of the
number of calories that you will burn during
the workout. The actual number of calories that
you burn will depend on your metabolic rate.
To select a set-a-goal workout, touch the Set A
Goal button on the screen or press the Set A Goal
button on the console.
5.Monitor your progress.
See step 5 on page 18.
To set a time,
distance,
calorie, or pace
goal, touch the
Time, Distance,
Calories, or
Pace button.
Then, touch the
increase and
decrease buttons on the screen to select a time,
distance, calorie, or pace goal and to select the
speed and incline for the workout. The screen will
show the duration and distance of the workout, and
the approximate number of calories you will burn
during the workout.
6. Measure your heart rate if desired.
See step 6 on page 19.
7. Turn on the fan if desired.
See step 7 on page 19.
8.When you are finished exercising, remove the
key from the console.
4.Start the workout.
Touch the Start button to start the workout. A moment after you touch the button, the walking belt
will begin to move. Hold the handrails and begin
walking.
21
See step 8 on page 19.
HOW TO USE AN IFIT LIVE WORKOUT
add them to your schedule on iFit.com.
For more information about the iFit Live workouts, please see www.iFit.com.
Note: To use an iFit Live workout, you must have access to a wireless network (see HOW TO USE THE
WIRELESS NETWORK MODE on page 25). An iFit
Live account is also required.
When you select an iFit Live workout, the screen
will show the name, duration, and distance of the
workout. The screen will also show the approximate number of calories you will burn during the
workout. If you select a competition workout, the
display will count down to the beginning of the
race.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page
16.
2. Select the main menu.
5. Start the workout.
See step 2 on page 18.
3. Log in to your iFit Live account.
During some workouts, the voice of a personal
trainer will guide you through your workout.
If you have not already done so, touch the Login
button to log in to your iFit Live account. The
screen will ask for your iFit.com username and
password. Enter them and touch the Login button.
Touch the Cancel button to exit the login screen.
6. Monitor your progress.
See step 5 on pages 18 and 19. The screen may
also show a map of the trail you are walking or
running.
4. Select an iFit Live workout.
See step 3 on page 20.
To download an iFit Live workout in your schedule,
touch the Map,
Train, Video,
or Lose Weight
button to
download the
next workout
of that type in
your schedule.
Note: You may
be able to access demo workouts through these
options, even if you do not log in to an iFit Live account.
During a competition workout, the screen will show
the speeds of the runners and the distances they
have run. The screen will also show the numbers
of seconds that the other runners are ahead of you
or behind you.
7. Measure your heart rate if desired.
See step 6 on page 19.
8. Turn on the fan if desired.
See step 7 on page 19.
9. W
hen you are finished exercising, remove the
key from the console.
To compete in a race that you have previously
scheduled, touch the Compete button. To view
your Workout History, touch the Track button. To
use a set-a-goal workout, touch the Set A Goal button (see page 21). Note: You can also press one of
the iFit Live buttons on the console.
See step 8 on page 19.
For more information about the iFit Live mode, go
to www.iFit.com.
To switch users within the account, touch the user
button near the lower right corner of the screen.
Before some workouts will download, you must
22
HOW TO USE THE EQUIPMENT SETTINGS MODE
To turn on or turn off the display demo mode, first
touch the Demo Mode button. Next, touch the On
checkbox or the Off checkbox. Then, touch the
back button on the screen.
The console features an equipment settings mode
that allows you to select a language and the unit of
measurement, to turn on and turn off the display demo
mode, and to enable or disable the key.
6. Enable or disable the key.
1. Select the settings main menu.
Note: This feature may not be enabled on your
treadmill.
Insert the key into the
console (see HOW
TO TURN ON THE
POWER on page 16).
Next, select the main
menu (see step 2 on
page 18). Then, touch
the gears button near
the lower right corner of the screen to select the
settings main menu.
You can disable the key so that the treadmill does
not require the use of the key if desired. Touch the
Safety Key button. To disable the key, touch the
Disable checkbox. CAUTION: Read the safety
warning on the screen before disabling the key.
To enable the key again, touch the Enable
checkbox.
7. Enable or disable a passcode.
2. Select the equipment settings mode.
The console features a child safety passcode, designed to prevent unauthorized users from using
the treadmill.
In the settings main menu, touch the Equipment
Settings button.
Touch the Passcode button. To enable a passcode, touch the Enable checkbox. Then, enter a
4-digit passcode of your choice. Touch Save to use
this passcode. Touch Cancel to return to the equipment settings mode and not use a passcode. To
disable the passcode, touch the Disable checkbox.
3. Select a language.
To select a language, touch the Language button
and select the desired language. Then, touch the
back button on the screen to return to the equipment settings mode. Note: This feature may not be
enabled.
Note: If a passcode is enabled, the console will
regularly ask for you to enter the passcode. The
console will remain locked until the correct passcode is entered. IMPORTANT: If you forget your
passcode, enter the following master passcode
to unlock the console: 1985.
4. Select the unit of measurement.
Touch the US/Metric button to view the selected
unit of measurement. Change the unit of measurement, if desired. Then, touch the back button on
the screen.
8. Exit the equipment settings mode.
5. Turn on or turn off the display demo mode.
To exit the equipment settings mode, touch the
back button on the screen.
The console features a display demo mode, designed to be used if the treadmill is displayed in
a store. While the demo mode is turned on, the
console will function normally when you plug in
the power cord, press the power switch into the
reset position, and insert the key into the console.
However, when you remove the key, the screen
will show a demo presentation.
23
HOW TO USE THE MAINTENANCE MODE
power switch into the off position. Wait for several
seconds, and then press the power switch into the
reset position. Note: It may take a few minutes for
the console to be ready for use.
The console features a maintenance mode that allows
you to update the console firmware, calibrate the incline of the treadmill, calibrate the screen, view technical information, and view a button’s keycode.
4.Calibrate the incline system of the treadmill.
1. Select the settings main menu.
Touch the Calibrate Incline button. Then, touch the
Begin button to calibrate the incline system. The
treadmill will automatically rise to the maximum
incline level, lower to the minimum incline level,
and then return to the starting position. This will
calibrate the incline system. Press the Cancel button to return to the maintenance mode. When the
incline system is calibrated, touch the Finish
button.
See step 1 on page 23.
2. Select the maintenance mode.
In the settings
main menu,
touch the
Maintenance
button to enter
the maintenance mode.
IMPORTANT: Keep pets, feet, and other objects
away from the treadmill while the incline system
is calibrating. In an emergency, pull the key
from the console to stop the incline calibration.
5. Calibrate the screen.
The maintenance mode main screen will show
information about the model and version of the
treadmill.
If the screen is not properly calibrated, it will be difficult to touch the correct buttons on the screen.
3. Update the console firmware.
To calibrate the screen, touch the Calibrate Screen
button. A small target will appear on the screen.
Touch the center of the target. Then, touch the rest
of the targets. After several seconds, the console
will exit the calibration mode.
For the best results, regularly check for firmware updates.
Touch the Firmware Update button to check for
firmware updates using your wireless network. The
update will begin automatically.
6. View machine information.
To avoid damaging the treadmill, do not turn
off the power or remove the key while the firmware is being updated.
Touch the Machine Info button to view information
about your treadmill. After you view the information, touch the back button on the screen.
Note: If you cannot update the console firmware
over your wireless network, you can update the
firmware using a USB drive. Go to www.iFit.com
and download the latest firmware update onto your
USB drive. Safely remove the USB drive from your
computer and plug it into the USB port on the top
of the console. The update should begin
automatically.
7. Find Keycodes.
This option is intended to be used by service technicians to identify whether a certain button is working correctly.
8. Exit the maintenance mode.
To exit the maintenance mode, press the back button on the console.
The screen will show the progress of the update.
When the update is complete, the treadmill will turn
off and then turn back on. If it does not, press the
24
HOW TO USE THE WIRELESS NETWORK MODE
An information box will ask if you want to connect
to the wireless network. Touch the Connect button
to connect to the network or touch the Cancel button to return to the list of networks. If the network
has a password, touch the password entry box. A
keyboard will appear on the screen. To view the
password as you type it, touch the Show Password
checkbox.
The console features a wireless network mode that allows you to set up a wireless network connection.
1. Select the settings main menu.
See step 1 on page 23.
2. Select the wireless network mode.
To use the keyboard, see HOW TO USE THE
TOUCH SCREEN on page 16.
In the settings main menu, touch the Wireless
Network button to enter the wireless network
mode.
When the console is connected to your wireless
network, the WiFi menu option at the top of the
screen will display the word CONNECTED. Then,
press the back button on the console to return to
the wireless network mode.
3. Enable Wi-Fi.
Make sure that the Wi-Fi checkbox is marked with
a green checkmark. If it is not, touch the Wi-Fi
menu option once and wait for a few seconds. The
console will search for available wireless networks.
To disconnect from a wireless network, select the
wireless network and then touch the Forget button.
If you are having problems connecting to an encrypted network, make sure that your password is
correct. Note: Passwords are case-sensitive.
4.Set up and manage a wireless network
connection.
When Wi-Fi is enabled, the screen will show a list
of available networks. Note: It may take several
seconds for the list of wireless networks to appear.
Note: The iFit Live mode supports unsecured and
secured (WEP, WPA, and WPA2) encryption. A
broadband connection is recommended; performance depends on connection speed.
Make sure that the checkbox on the Network
notification menu option is marked with a green
checkmark to have the console notify you when a
wireless network is within range and available.
Note: If you have questions after following
these instructions, go to www.iFit.com/support
for assistance.
5. Exit the wireless network mode.
Note: You must have your own wireless network
and an 802.11b/n router with SSID broadcast enabled (hidden networks are not supported).
To exit the wireless network mode, press the back
button on the console.
When a list of networks appears, touch the desired
network. Note: You will need to know your network
name (SSID). If your network has a password, you
will also need to know the password.
25
HOW TO USE THE STEREO SOUND SYSTEM
HOW TO USE THE INTERNET BROWSER
To play music or audio books through the console’s
speakers, you must connect your MP3 player, CD
player, or other personal audio player to the console.
Note: To use the browser, you must have access to
a wireless network including an 802.11b/n router with
SSID broadcast enabled (hidden networks are not supported).
Locate the audio wire. Plug one end into the audio jack
on the side of the console. Then, plug the other end
into a jack on your MP3 player, CD player, or other
personal audio player. Make sure that the audio wire
is fully plugged in.
Next, press the Play button
on your MP3 player, CD
player, or other personal
audio player. Then, adjust
the volume level on your
personal audio player or
press the Volume increase
and decrease buttons on
the console.
To open the browser, touch the globe button near the
lower left corner of the screen. Then, select a website.
To return to the previous web page, press the back
button on the console or touch the Browser Back button on the screen. To exit the browser, press the home
button on the console or touch the Return button on
the screen.
Increase
o use the keyboard, see HOW TO USE THE TOUCH
T
SCREEN on page 16.
Decrease
To enter a different web address in the URL bar, first,
slide your finger down the screen to view the URL bar,
if necessary. Then, touch the URL bar, use the keyboard to enter the address, and touch the Go button.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat surface instead of on the console.
Note: While you are using the browser, the speed, incline, fan, and volume buttons will still function, but the
workout buttons will not function.
Note: The USB port on the side of the console is for
firmware updates only.
If it is difficult to touch buttons on the screen, see
step 5 on page 24 and calibrate the screen.
Note: If you have questions after following these
instructions, go to www.iFit.com/support for
assistance.
26
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL
HOW TO MOVE THE TREADMILL
To avoid damaging the treadmill, adjust the incline to zero percent before you fold the treadmill.
Then, remove the key and unplug the power cord.
CAUTION: You must be able to safely lift 45 lbs. (20
kg) to raise, lower, or move the treadmill.
efore moving the treadmill, fold it as described at the
B
left. CAUTION: Make sure that the latch knob is
locked in the storage position. Moving the treadmill
may require two people.
1. Hold the frame and one of the handrails, and place
one foot against a wheel.
1. Hold the frame firmly in the location shown by the
arrow below. CAUTION: Bend your legs and
keep your back straight.
1
1
Frame
Handrail
Frame
Wheel
2.Raise the frame until the latch knob locks in the
storage position. CAUTION: Make sure that the
latch knob locks.
2. Pull back on the handrail until the treadmill will roll
on the wheels, and carefully move it to the desired
location. CAUTION: Do not move the treadmill
without tipping it back, do not pull on the frame,
and do not move the treadmill over an uneven
surface.
2
Frame
3. Place one foot against a wheel, and carefully lower
the treadmill.
HOW TO LOWER THE TREADMILL FOR USE
Latch
Knob
1.
See drawing 2. Hold the upper end of the treadmill frame with your right hand. Then, pull the latch
knob to the left. IMPORTANT: Do not turn the
latch knob. If necessary, push the frame forward
slightly. Pivot the frame downward a few inches,
and release the latch knob.
To protect the floor or carpet, place a mat under the
treadmill. Keep the treadmill out of direct sunlight.
Do not leave the treadmill in the storage position in
temperatures above 85° F (30° C).
2.
See drawing 1 at the left. Hold the metal frame
firmly with both hands, and lower it to the floor.
CAUTION: Do not hold the frame by the plastic
foot rails, and do not drop the frame. Bend your
legs and keep your back straight.
27
TROUBLESHOOTING
Most treadmill problems can be solved by following
the simple steps below. Find the symptom that
applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual.
c.Remove the key from the console, and then
reinsert it.
d.If the treadmill still will not run, please see the front
cover of this manual.
SYMPTOM: The power does not turn on
SYMPTOM: The console displays remain lit when
you remove the key from the console
a.Make sure that the power cord is plugged into a
surge suppressor, and that the surge suppressor is
plugged into a properly grounded outlet (see page
14). Use only a single-outlet surge suppressor that
meets all of the specifications described on page
14. IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets and may not be
compatible with AFCI-equipped outlets.
a.The console features a display demo mode, designed to be used if the treadmill is displayed in a
store. If the displays remain lit when you remove
the key, the demo mode is turned on. To turn off
the demo mode, see step 5 on page 23.
SYMPTOM: The displays of the console do not
function properly
b.After the power cord has been plugged in, make
sure that the key is inserted into the console.
a.Remove the key from the console and UNPLUG
THE POWER CORD. Place the treadmill in
the storage position (see HOW TO FOLD THE
TREADMILL on page 27).
c.Check the power switch located on the treadmill
frame near the power cord. If the switch protrudes
as shown, the switch has tripped. To reset the
power switch, wait for five minutes and then press
the switch back in.
a
c
1
Tripped
Reset
SYMPTOM: The power turns off during use
a.Check the power switch (see the drawing above).
If the switch has tripped, wait for five minutes and
then press the switch back in.
b.Make sure that the power cord is plugged in. If the
power cord is plugged in, unplug it, wait for five
minutes, and then plug it back in.
Next, remove the two indicated #8 x 3/4" Screws
(1).
28
SYMPTOM: The walking belt slows when walked on
Lower the treadmill (see HOW TO LOWER THE
TREADMILL FOR USE on page 27). Remove
the three #8 x 3/4" Screws (1). Carefully pivot the
Motor Hood (71) off.
a.Use only a single-outlet surge suppressor that
meets all of the specifications described on page
14.
1
71
b.If the walking belt is overtightened, treadmill performance may decrease and the walking belt may
become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the hex key, turn both
idler roller screws counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking belt is properly tightened.
Locate the Reed Switch (52) and the Magnet (50)
on the left side of the Pulley (49). Turn the Pulley
until the Magnet is aligned with the Reed Switch.
Make sure that the gap between the Magnet
and the Reed Switch is about 1/8 in. (3 mm). If
necessary, loosen the #8 x 3/4" Tek Screw (13),
move the Reed Switch slightly, and then retighten
the Screw. Reattach the Motor Hood (not shown)
with the five #8 x 3/4" Screws (not shown) and run
the treadmill for a few minutes to check for a correct speed reading.
b
2–3 in.
Top
View
Idler Roller Screws
1/8 in.
52
13
c.Your treadmill features a walking belt coated with
high-performance lubricant. IMPORTANT: Never
apply silicone spray or other substances to the
walking belt or the walking platform unless instructed to do so by an authorized service representative. Such substances may deteriorate
the walking belt and cause excessive wear. If
you suspect that the walking belt needs more lubricant, see the front cover of this manual.
50
49
SYMPTOM: The incline of the treadmill does not
change correctly
d.If the walking belt still slows when walked on, see
the front cover of this manual.
a. Calibrate the incline system (see step 4 on page
24).
29
SYMPTOM: The walking belt is off-center or slips
when walked on
SYMPTOM: The iFit Live mode does not function
correctly
a. If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD. If the
walking belt has shifted to the left, use the hex
key to turn the left idler roller screw clockwise 1/2
of a turn; if the walking belt has shifted to the
right, turn the left idler roller screw counterclockwise 1/2 of a turn. Be careful not to overtighten the
walking belt. Then, plug in the power cord, insert
the key, and run the treadmill for a few minutes.
Repeat until the walking belt is centered.
a. If the iFit Live mode is not functioning correctly,
make sure that the treadmill has the most current
firmware available (see step 3 on page 24).
SYMPTOM: The buttons on the screen do not work
correctly
a.If the screen is not properly calibrated, it will be difficult to touch the correct buttons on the screen. To
calibrate the screen, see step 5 on page 24.
a
b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD.
Using the hex key, turn both idler roller screws
clockwise, 1/4 of a turn. When the walking belt is
correctly tightened, you should be able to lift each
edge of the walking belt 2 to 3 in. (5 to 7 cm) off
the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord,
insert the key, and carefully walk on the treadmill
for a few minutes. Repeat until the walking belt is
properly tightened.
b
30
EXERCISE GUIDELINES
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning this
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The heart rate monitor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The heart rate monitor is
intended only as an exercise aid in determining heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up—Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise—never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your "training zone." The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exercise, you may complete up to five workouts each week,
if desired. Remember, the key to success is to make
exercise a regular and enjoyable part of your everyday
life.
31
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretch­—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts, then
relax. Repeat 3 times. Stretches: Hamstrings, back of knees and
back.
1
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot toward
you and rest it against the inner thigh of your extended leg. Reach
toward your toes as far as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Hamstrings, lower back and
groin.
2
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back foot
flat on the floor. Bend your front leg, lean forward and move your
hips toward the wall. Hold for 15 counts, then relax. Repeat 3 times
for each leg. To cause further stretching of the achilles tendons,
bend your back leg as well. Stretches: Calves, achilles tendons and
ankles.
3
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp one
foot with your other hand. Bring your heel as close to your buttocks
as possible. Hold for 15 counts, then relax. Repeat 3 times for each
leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.
32
5
NOTES
33
PART LIST­­
Model No. 24917.0 R0811A
Key No.Qty.
Description
Key No.Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
#8 x 3/4" Screw
5/16" x 3 3/4" Screw
3/8" x 2" Bolt
5/16" x 2" Screw
5/16" x 1 1/2" Screw
3/8" x 1 3/4" Bolt
3/8" x 2 3/4" Screw
3/8" x 1 1/4" Screw
#8 x 1/2" Ground Screw
5/16" Star Washer
3/8" Nut
3/8" Star Washer
#8 x 3/4" Tek Screw
3/8" x 1 1/2" Bolt
#10 x 3/4" Screw
Idler Roller Screw
3/8" x 2" Hex Head Bolt
3/8" x 2" Wheel Bolt
Cable Tie
#8 x 1 3/4" Screw
#8 x 7/16" Screw
5/16" Motor Screw
1/2" x 2 1/2" Bolt
3/8" x 1" Bolt
5/16" x 1 3/4" Shoulder Bolt
5/16" x 1 1/4" Bolt
5/16" x 3 1/4" Screw
1/4" x 1" Screw
1/4" Star Washer
#10 Star Washer
5/16" Flat Washer
5/16" Washer
1/2" Nut
3/8" Jam Nut
5/16" Nut
Hood Clip
Left Frame Cap
Foot Rail Insert
Left Foot Rail Pad
Left Foot Rail Base
Left Frame Cover
Platform Bracket
Latch Warning Decal
Walking Platform
Walking Belt
Belt Guide
Front Cushion
Wire Tie
Drive Roller/Pulley
Magnet
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Reed Switch Clamp
Reed Switch
Storage Latch
Drive Motor
Motor Belt
Frame
Right Frame Cover
Platform Cushion
Platform Grommet
Rear Leveling Foot
Idler Roller
Right Foot Rail Pad
Hex Key
Key/Clip
Rear Frame Cover
Rear Leveling Foot Cover
Audio Wire
Right Foot Rail Base
Right Frame Cap
Handrail Cap
Motor Hood
Hood Cover
Incline Frame Spacer
Incline Motor
Incline Frame
Frame Spacer
Controller
Hood Post
Electronics Plate
Power Cord
Grommet
Power Switch
Belly Pan
Upright Wire
Left Top Handrail Cap
Right Top Handrail Cap
Left Handrail
Right Handrail
Left Upright
Right Upright
Caution Decal
Left Base Cover
Right Base Cover
Base Ground Wire
Chest Strap
Left Wheel Cap
Base
Base Pad
Sensor
Right Wheel Cap
84
2
1
4
4
1
4
4
7
10
2
4
11
1
4
2
1
2
8
2
9
2
2
2
2
2
16
1
1
4
2
6
2
6
10
3
1
2
1
1
1
8
1
1
1
2
2
4
1
1
34
1
1
1
1
1
1
1
6
2
2
1
1
1
1
1
2
1
1
1
2
1
1
2
1
1
2
1
2
1
1
2
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
4
1
1
Key No. Qty.
Description
Key No. Qty.
Description
101
102
103
104
105
106
107
108
Wheel
Console Base
Console
Console Back
Fan Assembly
Handrail Spacer
Console Frame
Pulse Bar Top
Pulse Ground Wire
Pulse Bar Bottom
1/2" Rear Leveling Foot Nut
3/8" Flat Washer
#8 x 3/8" Screw
Short Hex Key
User’s Manual
2
1
1
1
1
2
1
1
109
110
111
112
113
114
*
1
1
2
2
1
1
–
Note: Specifications are subject to change without notice. For information about ordering replacement parts, see
the back cover of this manual. *These parts are not illustrated.
35
36
1
114
16
41
1
1
58
1
65
111
27
39
59
31
35
63
25
58
37
61
1
1
38
27
60
1
66
69
16
42
43
32
35
42
44
45
1
1
68
62
27
42
1
27
59
31
35
25
1
32
35
42
35 32
1
60
111
66
27
42
35
32
21
40
1
1
38
46
1
11
1
58
1
47
58
32
35
6
26
35
23
27
42
1
51
13
1
32
35
27
42
56
49
57
50
55
1
20
52
1
1
27
42
53
46
9
21
48
26
22
11
3
54
1
47
35
28
29
23
9
20
EXPLODED DRAWING­­ A
Model No. 24917.0 R0811A
EXPLODED DRAWING­­ B
Model No. 24917.0 R0811A
1
36
1
21
36
1
21
36
21
71
21
21
14
73
72
76
75
9
34
74
24
17
33
24
34
73
77
1
78
1
1
80
78
1
13
9
82
83
13
37
76
1
79
1
33
81
EXPLODED DRAWING­­ C
Model No. 24917.0 R0811A
85
84
86
87
70
89
92
91
88
8
12
90
70
7
84
7
94
91
81
34
9
93
98
1
13
34 96
98
18
13
7
97
34
7
101 112
18
112
101
98
100
1
34
38
98
13
12
13
8
EXPLODED DRAWING­­ D
Model No. 24917.0 R0811A
102
113
1
104
1
1
1
1
1
103
1
1
105
1
5 1
5
10
10
106
1
4
1
1
1
1
10
10
1
2
107
4
5
108
109
110
9
19
1
5
10
10
10
4
64
10
1
19
106
15
2
30
4
30
95
1
1
99
67
1
1
1
39
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING
near the end of this manual)
LIMITED WARRANTY
IMPORTANT: You must register this product within 30 days of the purchase date to avoid added
fees for service needed under warranty. Go to www.nordictrackservice.com/registration.
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. The frame, drive motor, and walking platform are warranted for a lifetime. Parts and electronics are warranted for five (5) years from the date of purchase. Labor
is warranted for two (2) years from the date of purchase.
This warranty extends only to the original purchaser (customer). ICON’s obligation under this warranty is
limited to repairing or replacing, at ICON’s option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be preauthorized by ICON. If the product is shipped
to a service center, freight charges to and from the service center will be the customer’s responsibility. If
replacement parts are shipped while the product is under warranty, the customer will be responsible for a
minimal handling charge. For in-home service, the customer will be responsible for a minimal trip charge.
This warranty does not extend to freight damage to the product. This warranty will automatically be voided
if the product is used as a store display model, if the product is purchased or transported outside the USA,
if all instructions in this manual are not followed, if the product is abused or improperly or abnormally used,
or if the product is used for commercial or rental purposes. No other warranty beyond that specifically set
forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special, or consequential damages arising out of or in connection with the use or performance of the product; damages with respect to any economic loss, loss of
property, loss of revenues or profits, loss of enjoyment or use, or costs of removal or installation; or other
consequential damages of any kind. Some states do not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, the above limitation may not apply to the customer.
The warranty extended hereunder is in lieu of any and all other warranties, and any implied warranties of
merchantability or fitness for a particular purpose are limited in their scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the
above limitation may not apply to the customer.
This warranty provides specific legal rights; the customer may have other rights that vary from state to state.
ICON Health & Fitness, Inc., 1500 S. 1000 W., Logan, UT 84321-9813
Part No. 317943 R0811A
Printed in USA © 2011 ICON IP, Inc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement