User operation manual - Dahle 533 and 534 guillotine paper cutter

User operation manual - Dahle 533 and 534 guillotine paper cutter
BUY IT NOW: Click Here
Dahle 534 Paper Cutter
BUY IT NOW: Click Here
Dahle 533 Paper Cutter
For Models - DAHLE 533, 534
Paper Trimmer
Professional Guillotine
4
6 7
8
9
5
1
2
Thank you for selecting DAHLE to be your Paper Cutter company. We trust you will be thoroughly satisfied
with your purchase. DAHLE cutters are highly regarded world-wide for their precision, reliability, and durability.
In addition, all DAHLE cutters are individually tested and must meet the most stringent performance standards.
During use, please observe the following suggestions for care, maintenance and proper operations:
• Your cutter is equipped with a scale printed in inches and centimeters (1). In addition, the cutting board
is printed with l/Z" grid lines (4), which acts as an excellent visual aid in achieving a straight T-square cut.
• Insert the material to be cut under the clamp / safety guard (3).
• Align material at desired position on inch/em scale (1). Material should be flush with paperstop (2), and
parallel to the printed grid lines (4). The adjustable pointer (5) is especially recommended if material is
to be cut several times exactly to the same size.
• Depress the material to be cut with the clamp. The clamp will secure the material in position, preventing
slippage. While clamping the material, lower the blade, pressing the blade gently toward the cutting
board, thereby ensuring that a consistent, smooth cut is attained even with the thinnest types of paper.
MAINTENANCE
Blade - The blade should never descend by itself. If it moves too easily, it can be adjusted with the bolt
assembly located at the fulcrum (10). In order to do so, remove the screw (6) first and take off the lid
(7). Then tighten the hex nut (8) and the screw (9) in a counter-action, thus adjusting the pressure of the
upper blade against the lower one. At last put the lid back on and secure with the screw.
Cutting Board Surface - The cutting board should be cleaned periodically, or as often as required, in order
to retain it's original lustre. A mild general household cleaner is recommended.
LUBRICATION
The blades of your DAHLE paper cutter were lubricated at the factory and do not require any additional
treatment. Do not lubricate the cutting blades.
CAUTION
•
•
•
--
Keep your fingers clear of the cutting blades.
Do not lubricate the cutting blades.
Keep out of reach of children.
Keep handle in down position when not in use and when moving or transporting.
Specifications and test data may change with-out notice, check with www.OREweb.ca for current product details and pricing.
Authorized
Dealer Canada
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement