TABLE OF CONTENTS

TABLE OF CONTENTS
Thermal Jade Massage Bed
TABLE OF CONTENTS
Product Introduction ............................................................................................... 2
Product Functionality............................................................................................................ 2
Main Features ....................................................................................................................... 2
Main Components ................................................................................................................ 3
Indications and Contraindications ........................................................................................ 5
Use Directions ........................................................................................................ 6
How to Use the Wire Remote Controller .............................................................................. 6
How to Use the Product........................................................................................................ 6
Tightness Adjustment ........................................................................................................... 7
PRODUCT PRECAUTIONS AND MAINTENANCE ....................................................... 8
FE
Safety Notice ......................................................................................................................... 8
Code Information .................................................................................................................. 9
Confirmation before Applying for the After-sale Service ..................................................... 9
PRODUCT INSTALLATION .........................................................................................10
NL
I
Installation Precautions ...................................................................................................... 10
Product Installation............................................................................................................. 10
PRODUCT CERTIFICATES AND SPECIFICATIONS ............................................................11
Troubleshooting & Service .................................................................................................. 11
Product Specifications ........................................................................................................ 11
ADDITIONAL INFORMATION ....................................................................................12
BO
Product Programs Diagram ................................................................................................. 12
Working Diagram ................................................................................................................ 13
1
Thermal Jade Massage Bed
PRODUCT INTRODUCTION
Product Functionality
The product (Thermal Jade Massage Bed) is approved by Chinese SFDA (State Food
and Drug Administration) as a medical instrument for the use in physical therapy and
physical recover. It is a method of instrument therapy through the infrared ray, heat
and movement treatment and it offers the combined therapeutic benefits of
acupressure, chiropractic and far-infrared heat with premium jade rollers. It can
relive the stress and tension in the muscles, improve the blood circulation and
increase energy.
Main Features
BO
NL
I
FE
1. New 3D remote controller
2. Automatic elevation system for both the back part and the leg part and can be
adjusted to 0~45°
3. MP3 + Earphone + USB plug
4. “S” track + 7 groups of jade rollers
5. Far-infrared carbon fiber heated board
6. The leg projector: vibration + carbon board
7. One foldable handle heater (5 jade balls & 15 jade balls which can be folded) can
be used on the desired part or other unreachable part of your body
8. Full-body jade massage bed, from head to toe
9. 7 kinds of massage programs. 6 kinds of automatic modes and 1 kind of manual
model available
10. Heating temperature from 40-70°C, providing heat to the painful part of the back
effectively
2
Thermal Jade Massage Bed
Main Components
BO
NL
I
FE
Product Drawing
3
Thermal Jade Massage Bed
Remote Controller
Back Projector
Far-infrared Ray
Temperature Display
Temperature Display
Elevation Mechanism
Handheld Projector
Temperature Display
Back Projector Location
Knocking (Thump)
MP3 Display
Vibration Display
Timing
Back Projector Temperature
Automatic Mode
NL
I
Mode Controller
FE
On/Off
Mode Display
Handheld Projector
Temperature Adjustment
Far-infrared Ray Heater
Knocking
BO
Back Elevation Mechanism
Leg Elevation Mechanism
Vibration
MP3
4
Thermal Jade Massage Bed
Indications and Contraindications
BO
NL
I
FE
1. Product Indications
Use as supplementary instrument treatment for lumbar spondylosis (chronically
strain of lumbar muscles, slipped lumbar disc, back pain etc.) and cervical spine
problems. It offers the combined therapeutic benefits of lumbar spondylosis, chronic
lumbar strain, protrusion of intervertebral disc, backache, etc.
2. Product Contraindications
People with following illness are strictly prohibited to use the product: pregnancy,
Tumor, severe osteoporosis, severe high blood pressure, acute suppurative
inflammation, hemorrhagic tendency, artificial cardiac pacemaker, bone fracture,
hypersensitive to electricity heat.
3. Precautions
(1). Cotton clothe is recommended during therapy. Please remove the belt and tie
before therapy.
(2). Please place cover over the external projectors to avoid direct contact with skin
(in case of excessive heat).
(3). Please do not place external projectors directly over your face to avoid the
contact with eyes.
(4). If you are sensitive to heat, please lower the temperature before using the
product.
(5). Please follow the instructions and do not use other products while using this
product.
(6). Please do not fall to sleep during the therapy.
(7). This therapy can’t replace any other medical treatments or surgeries suggested
or prescribed by your doctor for curing/healing purpose.
4. Inspection before Using the Product
(1). Make sure your power cable is plugged in the power jack.
(2). Check if the external projectors are plugged in properly with the bed.
(3). Check if the power switch and remote controller work normally.
(4). Check if all the lamps are working normally.
(5). Check if the temperature display is correct on the remote controller.
(6). Please make sure the projectors temperature is around 45°C ~55°C.
(7). Check if there is any abnormity about the projectors.
5. Inspection after using the product
(1). Check if the temperature display is turned off.
(2). Check if all lamps are shut off.
(3). Check if the power switch is at off position.
(4). Check if the power cable is unplugged from power jack.
5
Thermal Jade Massage Bed
USE DIRECTIONS
How to Use the Wire Remote Controller
BO
NL
I
FE
(1) Press On/Off, the back projector and the handheld projector start preheating for
10 minutes with the temperature showed on the controller window. (If you do not
press AUTO button in 10 minutes, the power will turn off automatically), at the same
time, the automatic elevation mechanism and MP3 start working. Press On/Off again,
the power will be turned off.
(2) During the process of preheating, press AUTO, and the product will work
automatically for 40 minutes. (All functional buttons can be available)
1. Back Mode: Press Back Projector to choose the back massage programs with 7
modes (N1→N2→N3→N4→N5→N6→N0). Among the modes,
N1→N2→N3→N4→N5→N6 are the automatic modes while N0 is manual one which
offers additional treatment on the desired position of the body.
2. Infrared: Press Infrared, and the far infrared ray starts working with heat.
3. Thump: Press Thump, and the knocking function starts working.
4. Vibration: Press Vibration, and the vibration function starts working.
Thump and Vibration can work for 10 minutes per time and can be only available
twice within 40 minutes.
5. Temperature Setting: Press “+” and “-” to adjust the temperature of the back
projector, the handle heater and the far-infrared ray heating. When setting the
temperature for the back projector, the controller window shows the temperature.
(The temperature can be adjusted by 5°C per time between 40°C ~70°C)
The ways to set the temperature for the handle heaters and far-infrared ray heating
are the same as the back projector.
6. MP3: Plug MP3 to USB Plug, and all the functions can work perfectly.
How to Use the Product
The Therapy Massage Methods
1. Rest the body with the belly up on the massage bed and adjust the angle of the
massage mat.
2. Use the AUTO mode and the foldable handheld projector to massage the back, the
neck, the arm and the other desired parts.
3. Use the automatic or the manual modes repeatedly to massage the desired part.
The thump (Knocking), Vibration and Therapy Massage Methods
1. Rest the body with the belly up on the massage bed and adjust the angle of the
massage mat.
2. Use the AUTO mode and the foldable handheld projector to massage the back, the
neck, the arm and other desired parts.
3. Use the Thump and Vibration to knock and vibration the back and the waist with
massage.
6
Thermal Jade Massage Bed
Tightness Adjustment
4. Remove the cloth filing as below.
BO
NL
I
3. Remove all three screws by applying
the proper screw driver.
2. Open the zipper.
FE
1. Please locate the zipper at the top end
of the leather cover.
5. User number 10 wrench to adjust the
two nuts as seen in the above picture.
6. Use the wrench to turn the left nut
360 degrees in clock wise.
7. User the wrench to turn right nut 360
degrees in clockwise. The nuts will cause
the cable to break over too much
tension.
Please not turn the nuts over 540 degree. Over tighten the nuts will cause the cable
the cable to break over too much tension.
7
Thermal Jade Massage Bed
PRODUCT PRECAUTIONS AND
MAINTENANCE
Safety Notice
BO
NL
I
FE
1. Safety
This product is designed for your maximum comfort and safety, however, improper
use may result in fire and electricity shock.
Please make sure your power outlet is AC220V/50Hz before the usage.
Please use the power cable that shipped with the product. Do not use other power
cables other than supplied.
Please go to your local store or your service centre to replace the power cable if it is
damaged.
Do not overload your power.
2. Usage Notice
Please turn off the power after finishing using the product or when you leave it, and
unplug the outlet.
Please do not disassemble the product if you are not the professional maintenance
person.
Please stop using the product and call the after-sale department if you hear the
abnormal noise during the usage of the product.
Please do not make some mistake about the outlet to avoid the malfunction.
Please do not pull the power cable to avoid the creepage.
Please do not touch the cable if the hands are wet to avoid electric shock.
Please do not use the outlet with other appliances.
Please unplug the outlet when you do not use the product for a long time or in the
rainy day.
8
Thermal Jade Massage Bed
Code Information
OF
Location
Temperature display
window
E0
Temperature display
window
E1
Temperature display
window
E2
Temperature display
window
E3
Mode display window
N0-N6
L0-L1
Mode display window
Mode display window
Code Explanation
Solution
Press the button and
start the heating
Heater malfunction
Temperature
transducer
malfunction
Temperature
transducer short
circuit
Change the transducer
or the cable connector
Change the transducer
or the main board
Temperature abnormal
Route buttons
abnormal
Back projector mode
Leg projector mode
Check the bulbs or the
cable connector
Change route switch or
cable connector
Normal
Not availble
FE
Code
Confirmation before Applying for the After-sale Service
Check
If the power cable is
plugged in properly
NL
I
Problem
BO
Remote Controller has no
or wrong display
If the remote controller is
plugged in properly
If the power is turned on
If the fuse is burnt
If press the wrong buttons
Projectors does not light
up
Internal projector (jade
rollers) does not move
If the power is plugged in
and the outlet can work
Solution
Reconnect the power
cable to the outlet
Reconnect the remote
controller cable to the
outlet
Turn the power switch to
“ON” position
Replace the fuse
Read the user manual
Do not dissemble the
product by yourself but
call the after-sale service
for maintenance
Press the remote
controller to choose the
programs
Turn off the power and
restart it again
No indicator light
Turn off the power and
restart it again
9
Thermal Jade Massage Bed
PRODUCT INSTALLATION
Installation Precautions
1. Product must be placed on the leveled ground.
2. Please use the product in the clean environment.
3. Please do not place the product near the fire.
4. Please avoid pouring fluid on the product.
5. Do not place the product on the unstable surface.
Product Installation
BO
NL
I
FE
Decomposition Chart
10
Thermal Jade Massage Bed
PRODUCT CERTIFICATES AND
SPECIFICATIONS
Troubleshooting & Service
NL
I
FE
According to the consumer protection law, we offer the quality guarantee for our
customers. Please contact our dealers near you or the after-sale service centre if you
have any question about our products.
Product Name
Thermal Jade Massage Bed
Model No.
BL-7700
Guarantee Period
1 Year
Customer Name
TEL/E-mail
ADD
Service Charges:
1. under the condition of Non-quality problem (not the problem of the quality but
because of the misuse)
2. the misuse caused by the customer
3. consumables parts
4. other (some irresistible factors)
5. if the products are used commercially (keep working for a long time), the
guarantee period will be 1 year
BO
Product Specifications
Product Name
Model No.
Rated Voltage
Consumed Power
Temperature
Safety Regulation
MEAS
N.W/G.W
Thermal Jade Massage Bed
BL-7700
AC 220V / 50Hz
≤400W
40~70°C
Class 1-Btype
Bed: 130×69×32
Bed Brace: 130×69×30
97kg / 103 kg
11
Thermal Jade Massage Bed
ADDITIONAL INFORMATION
Product Programs Diagram
N3: From waist to neck in 3 circles, then
every spot in 2 minutes. It spends about
30 minutes.
N3
Start N1
Over Every spot in 2 Mins
Strat
N4 Neck Mode
Over
NL
I
10 circle in neck.
It spends on about
6 minutes.
FE
Strat
N1: From waist to back, from waist to neck,
from neck to waist, from waist to back, 4
big circle, every pause in about 80 seconds,
again 4 circles. It will spend about 30
minutes.
BO
Start N5 Back Mode
10 circle in
back, it
spends
about 7
minutes
Over
Start N2
Over
Start N6 Waist Mode
10 circles in
waist, it spends
about 8-10
minutes
Over
From waist to neck in 2 circles,
every pause in about 20
seconds, then 2 circles. It
spends about 30 minutes.
Over
12
Thermal Jade Massage Bed
Working Diagram
AC220V
Power Box
Remote
Control
Central Processor
Motor Driver
Temperature
Control Unit
AC220V
FE
Alarm Box
Transformer
15 Balls Projector
Motor
NL
I
Route
Control Unit
5 Balls Projector
BO
Internal
7 Rollers Projector
13
Carbon Fiber
Heater Board
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement