1. Add program

1. Add program
Catalogue
Chapter 1
Introduction............................................................................... 1
1. Functions........................................................................................................ 1
2. Running Environments...............................................................................1
Chapter 2
Install and Uninstall................................................................ 3
1. Install Software............................................................................................. 3
2. Uninstall Software........................................................................................3
Chapter 3
Software Introduction............................................................4
1. Window...........................................................................................................4
2. Programs Construction.............................................................................. 5
3. Menu and Tool............................................................................................. 7
Chapter 4
Edit programs..........................................................................13
1. Set screen parameter............................................................................... 13
2. Add program...............................................................................................22
3. Add program...............................................................................................23
4. Add Play content.......................................................................................... 26
Chapter 5
Details of edit program.......................................................27
1. Video play.................................................................................................... 27
2. Display Picture............................................................................................28
3. Display text.................................................................................................. 30
4. Display table................................................................................................34
5. Date/ Time display.................................................................................... 35
6. Display timer............................................................................................... 37
Chapter 6
Software setting.....................................................................39
Chapter 7
User management................................................................. 40
1. User info....................................................................................................... 40
2. Rights............................................................................................................ 40
Chapter 8
FAQ..............................................................................................41
Chapter 1
Introduction
1. Functions
LedshowTV2015 is the software of BX-V SYNC series.
LedshowTV2015 adopts the best 3D and Gigabit LAN technologies,
which make the LED screens with best effects, most convenient high
refresh technology, more abundant display functions, more completed
products series and the best applications.
LedshowTV2015 supports three display modes ( High refresh
mode/Recommend mode/Text mode); Supports File, Video, Audio,
Graphic, Text, Subtitle, Table and all media file; Supports Word, Excel,
PPT display synchronously; Support Clock, Date and Timer functions;
Support multi-programs editing; Support 65536 pixels in length!
LedshowTV2015 support BX-V full series sending and receiving
cards, and support setting parameters intelligently.
LedshowTV2015 supports Simplified Chinese, Traditional
Chinese, Korean, Japanese, French, Russian, Thai, Arabic, German,
Spanish Language, Portuguese, Vietnamese, Kazakh, Croatian, Turkish,
etc.
2. Running Environments
LedshowTV2015 supports Windows XP/ Vista/Windows7/Window
8 system.
1
Gigabit card mode, suggest you the configuration of your
computer:
 CPU
more than 2.0 GHZ
 Storage
more than 1GB
 There’s Gigabit card or with PCI/PCI-E Gigabit card on the
computer main board;
Sending card mode, suggest you the configuration of your computer:
 CPU
more than 2.0 GHZ
 Storage
more than 1GB
 Discrete graphics, more than 512MB, and must with DVI port;
Note: Users must adjust the configurations of the computer
according to the LED screen pixels, the complex level of programs and
the video is HDV or not.
2
Chapter 2
Install and Uninstall
1. Install Software
1. Open software CD---Double click LedshowTV2015---Select
install language---Click “Sure”.
2. Enter into installing guide. Click “Next”
3. Select install route, click “Next”
4. Enter into install window, click “install”
5. Finish, click “ok”
6. After finishing the installation, there will be a shortcut icon
. Double click as to open the software.
2. Uninstall Software
3
Chapter 3
Software Introduction
1. Window
When open the software, users will see the software window, like
Picture 1. Including two parts: Play window and Edit window.
Picture 1
1. Play Window
4
Play window is the Preview window.
2. Edit window
Edit window: Menu bar, Main Toolbar, Edit Programs Toolbar,
Add Programs Toolbar, Program Tree area, Attributes bar and Status
bar.
2. Programs Construction
LedshowTV2015 Program Tree area is made with 3 levels: LED
screen, Programs and File area.
Picture 2
 LED screen: Synchronous display in LED screen and full color
screen. Every “led screen” is coordinating relation, and users can
add may programs on led screen.
5
 Programs: Program, means the combination of one group file area
and program content. Every “program” is coordination and “in
turn” playing relation.
Picture 3
 File area: File area is the distributing window of program, which
decides the whole arrangement of the program. Every “file area”
is coordinating and simulcasting relation.
6
Picture 4
3. Menu and Tool
1. Main menu
Picture 5
1.1 File menu
Picture 6
7
In file menu, mainly for saving and opening of the program file (*.bx
file).
1.2 Edit menu
Picture 7
The function of Edit area: add or delete program, file area, video area,
graphic area, text area, subtitle area, date/time and timer.
1.3 Set menu
Picture 8
 Set parameters: Set screen hardware parameters, including
sending equipment configuration, connect receiving card, scan mode,
8
display parameters configuration, import & export configuration
parameters and controller process maintenance.
 Software set: All sets of software, including play window
parameters; show on the top; run software automatically when start the
computer.
 User management: Encryption and limits of authority.
1.4 Common Command
Picture 9
 Brightness adjustment: adjust the brightness of led screen.
1.5 Tool menu
Picture 10
 Mouse position: Check the coordination of the computer display.
 Check color: check the color RGB value of the computer display.
 Screen shot of Gigabit: On the mode of Gigabit mode, used to
synchronous zoom in and out the area content on computer display.
1.5 Language menu
9
Users can change the language you want for the software.
Support: Simplified Chinese, Traditional Chinese, Korean, Japanese,
French, Russian, Thai, Arabic, German, Spanish Language, Portuguese,
Vietnamese, Kazakh, Croatian, Turkish, etc.
1.6 Test menu
Used to manufacturing and installing, as to test the line and color of
the led screen.
1.7 Help menu
Check the software version and user manual. Support updating
online.
Picture 11
2.
Main Toolbar
The main functions on main toolbar: operate program file,
show/hide play window, the order of playing programs, choose play or
10
stop, three display mode (High refresh mode/Recommend mode/Text
mode) .
Picture 12
3.
Edit program Toolbar
Picture 13
From left to right:
 New program: Add program page on the selected play window.
 Copy: Copy the selected one or all the content under it.
 Paste: Paste the copied content.
 Move up: Move the selected content to the front.
 Move down: Move the selected content to the behind.
 Delete: Delete the selected content.
 Check: Check the programs which with the words you want.
4.
Add program Toolbar
Picture 14
From left to right:
 File area: Add file area.
 Video area: Add video area.
11
 Graphic area: Add graphic area.
 Text area: Add text area.
 Subtitle area: Add subtitle area.
 Date/Time area: Add date/time area.
12
Chapter 4
Edit programs
1. Set screen parameter
Please set correctly about the size of led screen, or the program will
display just a part of them or no display.
Set LED screen: Select menu “setup”--”software option”--set
the quantity, place of start and end, size of the LED screen (Like picture
15).
Picture 15
Set controller: Select menu “setup”-- “set screen parameters”,
here you can set send device configuration, receiving card connection,
scan
configuration,
parameters
configuration,
13
import
/
export
configuration parameters and firmware maintenance, etc. ( Like picture
16).
Picture 16
 Sending equipment configuration: Choose the connected sending
equipment. Can select Gigabit Ethernet card or BX SYNC sending
cards.
Gigabit Ethernet port: Connect receiving card directly, synchronous
display.
BX SYNC sending cards: Connect by sending cards/box,
synchronous display.
14
 Connect receiving cards: Input the orders of led screen installing
wire and the pixels of each receiving card can support. (Like
picture 17).
Picture 17
 Scan configuration: According to LED modules, to configure the
corresponding scan configuration. Usually, the scan mode of
indoor full color module is 16.0 (Like picture 18); outdoor full
color module, check the below (picture 19). Others, can use
LedshowTV2015 to find out, by “smart scan”(Like picture 20).
15
Picture 18
Picture 19
Picture 20
16
Intelligent scan configuration: Click “ intelligent scan
configuration” button, enter into “intelligent setting
guide-1”(Like picture 21). Then, set the module width, driving chip,
quantity of empty pixels, have 138 or not.
Picture 21
Click “next” button, enter into “intelligent setting
guide-2”(Like picture 22). Choose the correct display status
according to the module.
17
Picture 22
Click “next” button, enter into “intelligent setting
guide-3”(like picture 23). Choose the display brightness comparison
according to the module.
Picture 23
Click “next” button, enter into “intelligent setting
guide-4”(Like Picture 24). Choose the display color according to the
module.
18
Picture 24
Click “next” button, enter into “intelligent setting
guide-5”(like picture 25). Choose the brightness line number
according to the module.
Picture 25
Click “next” button, enter into “intelligent setting
guide-5”(like picture 26). Choose the brightness line number
according to the module.
Picture 26
19
Click “next”button, enter into “intelligent setting
guide-7”(like picture 27). Fill in the pixels according to the screen.
Then, the new scan mode will be configured.
picture 27
 Display parameter configuration: Set the display mode, shift clock,
duty cycle,gray scale grade, refresh rate, effective rate of
brightness, maximum OE width,gamma correction, gray scale
from 1 grade,etc. (Like picture 28).
20
REC mode: The best mode of photography effect, also called
high refresh mode or visual refresh priority mode. Mainly used in
television studio, vocal concert, wedding celebration video. Based on
principles of no any scanning line when use the camera shooting.
Recommend mode: The mainly wording mode for daily display,
the photography effect is lower than the visual fresh rate, give
consideration to better photography effect, in the mean time, the
visual effect is the best. Users cannot see the darken light spot with
clear frames and best character display effect. The default mode for
our software is recommend mode.
Text mode: Conservative display mode, to some of the modules
which have problem of circuit design or the driver chip which make
the lower speed of switching, only sacrifice the visual refresh rate to
make sure the clear frames and cannot see the darken light spot, In
this case, only use the text mode.
21
picture 28
 Import/Export configuration parameters: Import the configured
parameters to SYNC software in another PC.
 Controller progress maintenance: Check sending card/box and the
firmware version of receiving card, as to update or maintain.
2. Add program
Click
button, or click Toolbar
Picture 29
22
(Like photo 33).
After establishing program, there will show the corresponding
attributes on the right side (Like photo 34), usually it’s default.
Picture 30
Set the below parameters on the program attributes:
 Program name: modify the name of this program.
 Play management: Set the play orders or play time.
Play in order: Wait until the the play finish.
Play time: Play period.
 Set background: Set the background for this program.
 Background music.
 Volume.
3. Add program
23
1. Add program
After establishing the program, click
or click
or right click “program” as to add file area (like picture 31). There
are many file area in one program, the size and place can be set.
Picture 31
With below areas:
 File area: Can add or play video, graphic, text, txt, word, excel, ppt,
flash, gif, etc.
 Video area: Can add or play all formats video files.
 Graphic area: Can add or play all formats graphics.
 Text area
 Subtitle area
 Time/Date area
24
 Database area
 Video export area: Can play outer video. Like camera, TV card, DVD,
etc.
 Weather forecast area
2. Set file area attributes
All file areas have mutual attributes (Like picture 32).
Picture 32
 Name
 Border
 Color
 Alpha
 Left X
 Top Y
 Width
 Height
 Add
 Move up
25
 Move down
 Delete
4. Add Play content
After adding file area, can add corresponding file as to play
according to the types of file area. After adding, will show
simultaneously in LED screen and play window. Meanwhile, users can
add or modify program according to the display status of LED screen.
26
Chapter 5
Details of edit program
1. Video play
1. Add video
Establish one “file area” or “video area”. Click button
, as to
add one or more video files. LedshowTV2015 software supports all
video format, AVI/MPEG/ASF/WMV/RM...
Picture 33
2. Video attribute
27
Video attribute can modify the Transition in effect, run speed, display
effect and volume.
 Transition in Effect: Random, Ever-changing,3D Cube, 3D Door,
Page Roll,Circle Stretch,Ripple, Wave,Radial
Blur,Checkerboard,Drip,Alpha
Blend,Expand,Wipe,Blinds,Circular,Slide,Push,Direct show.
 Run speed: the speed of Transition in Effect is from 1-5 grades, 1
grade is the fastest.
 Display effect: Stretch and Aspect.
 Volume: from 0-100.
2. Display Picture
1. Add picture
Add one “file area” or “picture”. Click
supports all formats: BMP/JPG/PNG...
28
, LedshowTV2015
Picture 34
2. Picture Attributes
Picture attribute can modify the Transition in effect, run speed,
hold time, display effect.
 Transition in Effect: Random, Ever-changing,3D Cube, 3D Door,
Page Roll,Circle Stretch,Ripple, Wave,Radial
Blur,Checkerboard,Drip,Alpha
Blend,Expand,Wipe,Blinds,Circular,Slide,Push,Direct show.
 Run speed: the speed of Transition in Effect is from 1-16 grades, 1
grade is the fastest.
 Hold time: 1-5000 (0.5 seconds)
 Display effect: stretch, aspect and cut
29
3. Display text
1. Display text in single line
Add one “file area” or “subtitle area”. Click
; Or click
open/add subtitle. Can set the background color, font, spacing ,etc.
The text can be TXT file or typing directly. If it’s from TXT file, the
content will be updated according to the changes in TXT file.
Picture 35
30
Picture 36
 File name: For users, as to distinguish the different names of
subtitle, can be modified.
 Transition effect: Continuously move left, Continuously move right,
Continuously move up, Continuously move down, Direct show.
 Run Speed: from 1-8 grades, 1 grade is the fastest.
 Hold time: can be set (0.5 seconds).
 Background: Color background or picture background, and also ca
be set transparently. Transparent value: 20%-100%, 100% value is not
transparent.
2. Display text in multi-line
31
Add one “file area” or “subtitle area”. Click
; Or click
open/add subtitle. Can set the background color, font, spacing ,etc.
The text can be TXT file or typing directly. If it’s from TXT file, the
content will be updated according to the changes in TXT file.
Picture 37
32
Picture 38
 File name: For users, as to distinguish the different file name, can
be modified.
 Transition in Effect: Random, Ever-changing,3D Cube, 3D Door,
Page Roll,Circle Stretch,Ripple, Wave,Radial
Blur,Checkerboard,Drip,Alpha
Blend,Expand,Wipe,Blinds,Circular,Slide,Push,Direct show,Continuously
move left, Continuously move right, Continuously move up, Continuously
move down.
 Run speed: the speed of Transition in Effect is from 1-16 grades, 1
grade is the fastest.
 Hold time: 1-5000 (0.5 seconds)
33
 Background: Color background or picture background, and also ca
be set transparently. Transparent value: 20%-100%, 100% value is not
transparent.
4. Display table
1. Add table
Add “table area”. Click
open/ add table. Edit on the table
area directly or upload the excel file by click
Picture 39
34
.
2. Table attribute
Table attribute can modify the table name, transition effect, run
speed, hold time and background.
 Table name:For users, as to distinguish the different file name, can
be modified.
 Transition in Effect: Random, Ever-changing,3D Cube, 3D Door,
Page Roll,Circle Stretch,Ripple, Wave,Radial
Blur,Checkerboard,Drip,Alpha
Blend,Expand,Wipe,Blinds,Circular,Slide,Push,Direct show.
 Run speed: the speed of Transition in Effect is from 1-16 grades, 1
grade is the fastest.
 Hold time: 1-5000 (0.5 seconds)
 Background: Color background or picture background, and also ca
be set transparently. Transparent value: 20%-100%, 100% value is not
transparent.
5. Date/ Time display
1. Display clock
”Time type”, select “clock”. For clock, users can set the
appearance of the clock, shape and color of the pointer, etc. Clock
supports Time Difference. Support color and picture background, and the
transparent value, from 20%-100%, 100% is not transparent.
35
Picture 40
2. Display date/time
”Time type”, select “Date/Time”. For Date/Time, can set the
font, font size, color of year, month, day, week, time. Date/Time supports
Time Difference. Support color and picture background, and the
transparent value, from 20%-100%, 100% is not transparent.
36
Picture 41
6. Display timer
Timer area attribute (Like picture 47). Can set the font, font size, Bold,
italic, underline, color,etc; Target time. Timer supports Time Difference.
Support color and picture background, and the transparent value, from
20%-100%, 100% is not transparent.
37
Picture 42
 Count down
 Count up
38
Chapter 6
Software setting
All the settings of software, can also set the play position and size at
the same time.
Picture 43
 Start software automatically when start the computer
 Show wallpaper: When you don’t edit program, it will show
Tri-color, or just black.
 It will display program when start the software: Will display the last
save program.
 The display window will show on the top of the desk
39
Chapter 7
User management
It’s mainly for add manager and users, also to distribute the rights.
Click “set”--”user management”, enter into “user
management”(Like picture 49).
Picture 44
1. User info
Name/passwords: account and passwords.
2. Rights
 Manager: can do all operations, and distribute the corresponding
rights.
 User: Do all the operations of display.
 Limited user: Only write and display the programs which was edit.
 Start authentification of user: You need to log in when open the
software.
40
Chapter 8
FAQ
Q: How to change the quantity, position and size of the display
window?
A: “set”--”software set”, set the quantity, start line, start row, length
of the row, height of the line.
Q: If there are some video files cannot be played, how can we handle ?
A: Please download the video decoder and install.
Q: If we want to display the program automatically when start the
software, how can we do that?
A: Firstly save the edit program as “*.bx file”. Then select the
“set”--”software set”--”play automatically when start the
software”, “OK”.
Q: On Gigabit communication mode, how to display the desktop
content?
A: “Tool”--”Gigabit screen shot “, cut the content which you want to
display, click “ start screen shot”.
Q: What should we do if we cannot find after starting the Gigabit
screen shot ?
A: On the right side of the task bar, find “ ”, right click “stop screen
shot” or “exit”.
41
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement