9385 WOODEN DOLL CRIB
Assembly Instructions
! WARNING:
Adult assembly required.
Item # 9385
We care about your comments. Please call us!
1-800-284-3948
www.MelissaAndDoug.com
c 2013 Melissa & Doug, LLC, P.O. Box 590, Westport, CT 06881
All Rights Reserved
! WARNING:
CHOKING HAZARD- Small parts.
Not for children under 3 years.
9385 WOODEN DOLL CRIB
Parts
(B) 2 Pieces
(C) 2 Pieces
(A) 2 Pieces
(D) 2 Pieces
(F) 2 Pieces
(E) 2 Pieces
Mattress
1 Piece
(G) 1 Piece
Pillow
1 Piece
Blanket
1 Piece
HARDWARE
(Shown Actual Size)
Barrel Nut
20 Pieces
Hex Key
1 piece
Hex Head
Short Screw
4 Pieces
Hex Head
Medium Screw
12 Pieces
Hex Head
Long Screw
8 Pieces
9385 WOODEN DOLL CRIB
How to correctly install
Barrel Nuts
(Images on this page are
for example only.)
Press a Barrel Nut into the hole in the
part making sure that the "+" pattern
is facing out.
"+" pattern
Using a standard screwdriver, turn
the Barrel Nut until the threaded hole is facing
outward to accept the screw shown below.
Threaded hole
of the Barrel Nut
9385 WOODEN DOLL CRIB
STEP 1
Assemble parts (B) and (C) to part (A) using 4 Long Screws
and 4 Barrel Nuts as shown below.
Repeat the same for the second side using the additional
parts (A), (B) and (C).
B
C
A
Barrel Nut
Long Screw
Barrel Nut inserted and turned
so its hole matches the hole in
the wood panel. See the detailed
instructions on installing Barrel
Nuts at the beginning of this
Assembly manual.
Completed assembly
9385 WOODEN DOLL CRIB
STEP 2
Assemble 2 parts (D) as shown using 4 Medium Screws
and 4 Barrel Nuts.
Make sure to face the holes for
the Barrel Nuts on part (D) inward for a smooth look
on the outside of the Crib.
D
Medium Screw
4 pieces for
this Step
Holes for Barrel Nuts
should face inward
D
Barrel Nut
4 pieces for
this Step
Completed assembly
9385 WOODEN DOLL CRIB
STEP 3
Attach 2 parts (E) as shown using 2 Short Screws
E
E
Short Screw
2 pieces for
this Step
Completed assembly
9385 WOODEN DOLL CRIB
STEP 4
Attach the second Side Assembly that you made
in Step 1 as shown below using 4 Barrel Nuts,
4 Medium Screws and 2 Short Screws.
Short Screw
Medium Screw
4 pieces for
this Step
Barrel Nut
6 pieces for
this Step
Short Screw
2 pieces for
this Step
Second side assembled
in Step 1
Completed assembly
9385 WOODEN DOLL CRIB
STEP 5
Assemble 2 parts (F) as shown below using 4 Medium Screws
and 4 Barrel Nuts.
F
F
Barrel Nut
4 pieces for
this Step
Note: This side of part (F) is
recessed for the head of the
Screw. Make sure to use this
side as shown.
Completed assembly
Medium Screw
4 pieces for
this Step
9385 WOODEN DOLL CRIB
STEP 6
Fit part (G) to the assembled Crib by tipping one end
in first, then lowering the opposite end.
G
Add the Mattress, Blanket and Pillow and you are ready to play!
Completed assembly
">
